ONEACCESS-SNMP-CONFIG-MIB
34 objects
fixed compilation issues
Imported Objects
| ONEACCESS-GLOBAL-REG | oacExpIMIpAcl oacExpIMManagement oacMIBModules |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13191.1.100.2002 | IdentityoacSnmpConfigMIB | 381 | fixed compilation issues | |
| 1.3.6.1.4.1.13191.10.3.4.20 | NodeoacSnmpConfig | |||
| 1.3.6.1.4.1.13191.10.3.4.20.1 | NodeoacSnmpConfigObjects | |||
| 1.3.6.1.4.1.13191.10.3.4.20.1.1 | ScalaroacSnmpSource | read-write | current | snmp source { <interface> | any } |
| 1.3.6.1.4.1.13191.10.3.4.20.1.2 | ScalaroacSnmpTrapSource | read-write | current | snmp trap-source { <interface> | any } |
| 1.3.6.1.4.1.13191.10.3.4.20.1.3 | ScalaroacSnmpMibIfDescrShort | read-write | current | will display the interface name with out spaces between the interface and unit |
| 1.3.6.1.4.1.13191.10.3.4.20.1.4 | ScalaroacSnmpChassisId | read-write | current | Chassis Id of this device. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.5 | ScalaroacSnmpMaxMsgSize | read-write | current | maximum size of the snmp message |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6 | TableoacSnmpCommunityConfigTable | not-accessible | current | This table will hold the configuration required to apply the SNMP view on a read/write V2C community. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1 | RowoacSnmpCommunityConfigEntry | not-accessible | current | A Entry will hold the view applied for a community. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.1 | ColumnoacSnmpCommunityString | not-accessible | current | The community string |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.2 | ColumnoacSnmpCommunityAccessType | not-accessible | current | This object identifies the type of community for which this community string is attached. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.3 | ColumnoacSnmpCommunityAclType | read-create | current | Ipv4 or Ipv6 Acl attached to this snmp community string |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.4 | ColumnoacSnmpCommunityAclName | read-create | current | Ipv4 Acl attached to this snmp community string |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.5 | ColumnoacSnmpCommunityV2GroupName | read-create | current | Snmp group attached to this community string |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.6 | ColumnoacSnmpCommunityisEncrypted | read-create | current | if true the string should be encrypted. If false it will be a plain text string. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.7 | ColumnoacSnmpCommunityRowStatus | read-create | current | The row status for this entry |
| 1.3.6.1.4.1.13191.10.3.4.20.1.7 | ScalaroacSnmpEngineId | read-write | current | By default on OneOS the engineId is created by using the mac address of FastEthernet Interface. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.8 | ScalaroacSnmpRemoteAgentIpAddr | read-write | current | From the ip address provided remote agent's engine id is discovered. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.9 | TableoacSnmpRemoteEngineIdConfigTable | not-accessible | current | This table will hold the configuration for snmp traps. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.9.1 | RowoacSnmpRemoteEngineIdConfigEntry | not-accessible | current | A Entry will hold if a trap is enabled or disabled. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.1 | ColumnoacSnmpRemoteEngineId | not-accessible | current | Engine Id of the remote. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.2 | ColumnoacSnmpRemoteEngineIpAddr | read-create | current | if true the string should be encrypted. If false it will be a plain text string. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.3 | ColumnoacSnmpRemoteEngineMaxMsgSize | read-create | current | if true the string should be encrypted. if false it will be a plain text string. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.4 | ColumnoacSnmpRemoteEngineRowstatus | read-create | current | The row status for this entry |
| 1.3.6.1.4.1.13191.10.3.4.20.1.10 | TableoacSnmpTrapConfigTable | not-accessible | current | This table will hold the configuration for snmp traps. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.10.1 | RowoacSnmpTrapConfigEntry | not-accessible | current | A Entry will hold if a trap is enabled or disabled. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.10.1.1 | ColumnoacSnmpTrapConfigType | not-accessible | current | The user can enable or disable the following traps: 1. standard, 2. acl, 3. bgp, 4. ipsec, 5. isakmp, 6. isdn, 7. nat, 8. pstn, 9. vrrp |
| 1.3.6.1.4.1.13191.10.3.4.20.1.10.1.2 | ColumnoacSnmpTrapConfigisEnabled | read-create | current | if true the string should be encrypted. if false it will be a plain text string. |
| 1.3.6.1.4.1.13191.10.3.4.20.1.10.1.3 | ColumnoacSnmpTrapConfigRowStatus | read-create | current | The row status for this entry |
| 1.3.6.1.4.1.13191.10.3.4.20.2 | NodeoacSnmpConfigConformance | |||
| 1.3.6.1.4.1.13191.10.3.4.20.2.1 | NodeoacSnmpConfigGroups | |||
| 1.3.6.1.4.1.13191.10.3.4.20.2.1.1 | GroupoacSnmpConfigGroup | current | Group of SNMP objects | |
| 1.3.6.1.4.1.13191.10.3.4.20.2.2 | NodeoacSnmpCompls |