ONEACCESS-UPS-MIB
11 objects
The MIB module to describe Uninterruptible Power Supplies.
Imported Objects
| ONEACCESS-GLOBAL-REG | oacExpIMManagement |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | AutonomousType DisplayString TestAndIncr TimeInterval TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13191.10.3.4.1225 | IdentityoacUpsMIB | 92140 | The MIB module to describe Uninterruptible Power Supplies. | |
| 1.3.6.1.4.1.13191.10.3.4.1225.1 | NodeoacUpsMIBObjects | |||
| 1.3.6.1.4.1.13191.10.3.4.1225.1.1 | NodeoacUpsBattery | |||
| 1.3.6.1.4.1.13191.10.3.4.1225.1.1.1 | ScalaroacUpsBatteryStatus | read-only | current | The indication of the capacity remaining in the UPS system's batteries. A value of batteryNormal indicates that the remaining run-time is greater than upsConfi… |
| 1.3.6.1.4.1.13191.10.3.4.1225.1.2 | NodeoacUpsAlarm | |||
| 1.3.6.1.4.1.13191.10.3.4.1225.1.2.1 | ScalaroacUpsAlarmsPresent | read-only | current | The present number of active alarm conditions. |
| 1.3.6.1.4.1.13191.10.3.4.1225.1.2.2 | ScalaroacUpsAlarmDescr | read-only | current | A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm con… |
| 1.3.6.1.4.1.13191.10.3.4.1225.1.2.3 | ScalaroacUpsAlarmTime | read-only | current | The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before ag… |
| 1.3.6.1.4.1.13191.10.3.4.1225.2 | NodeoacUpsTraps | |||
| 1.3.6.1.4.1.13191.10.3.4.1225.2.0 | NotificationoacUpsTrapAlarmEntryAdded | current | This trap is sent each time an alarm is inserted into to the alarm table. It is sent on the insertion of all alarms except for upsAlarmOnBattery and upsAlarmTe… | |
| 1.3.6.1.4.1.13191.10.3.4.1225.2.1 | NotificationoacUpsTrapAlarmEntryRemoved | current | This trap is sent each time an alarm is removed from the alarm table. It is sent on the removal of all alarms except for upsAlarmTestInProgress. |