MIB Viewer

ORION-BASE-MIB

505 objects
MIB for managing a DC power system with ORION. V6.60B22
Imported Objects
GLOBAL-REGmodules orion
INET-ADDRESS-MIBInetAddress
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIenterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.20246.2.1.1.2IdentityorionBaseMibModuleMIB for managing a DC power system with ORION. V6.60B22
1.3.6.1.4.1.20246.2.3.1.1.1NodeorionBaseMib
1.3.6.1.4.1.20246.2.3.1.1.1.1NodecontrollerConfs
1.3.6.1.4.1.20246.2.3.1.1.1.1.1NodecontrollerGroups
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.1GroupsystemInfoGroupcurrentThe collection of system info scalar objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.2GroupsystemAlarmGroupcurrentThe collection of system alarm scalar objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.3GroupsystemMonitorGroupcurrentThe collection of system monitor scalar objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.4GrouprectifierGroupcurrentThe collection of rectifier scalar objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.5GroupeventHistoryTableGroupcurrentThe collection of event history table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.6GroupalarmTableGroupcurrentThe collection of alarm table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.7GrouprectifierTableGroupcurrentThe collection of rectifier table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.8GroupnotificationsGroupcurrentThe group of all controller notifications.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.9GroupgenericAlarmTableGroupcurrentAssignment of events to alarm table entries.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.10GroupbatteryGroupcurrentThe collection of battery scalar objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.11GroupcontrolEventTableGroupcurrentAssignment of control events to table entries.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.12GrouptrapDestinationTableGroupcurrentTrap destionation table.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.13GroupmiscGroupcurrentThe collection of miscellaneous objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.14GrouprectifierGroupTableGroupcurrentThe collection of rectifier group table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.15GroupbatteryStringTableGroupcurrentThe collection of battery string table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.16GroupdefaultLogEventTableGroupcurrentThe collection of default log event table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.17GroupeventProcessingEventTableGroupcurrentThe collection of event processing event table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.18GrouplvdTableGroupcurrentThe collection of LVD table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.19GrouppowerLimitationTableGroupcurrentThe collection of power limitation table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.20GroupmeasurementTableGroupcurrentThe collection of measurement table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.21GroupmeterPanelEventTableGroupcurrentThe collection of meter panel event table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.22GroupmeterPanelmeasurementTableGroupcurrentThe collection of meter panel measurement table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.23GroupbatteryLithiumTableGroupcurrentThe collection of Lithium battery table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.24GroupbatteryLifePredictionTableGroupcurrentThe collection of battery life prediction table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.25GrouppvcGroupcurrentThe collection of PVC scalar objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.26GrouppvcTableGroupcurrentThe collection of PVC table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.27GrouppvcGroupTableGroupcurrentThe collection of PVC Group table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.28GroupinventoryTableGroupcurrentThe collection of inventory table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.29GroupeventDefinitionTableGroupcurrentThe collection of event definition table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.30GroupfilterTableGroupcurrentThe collection of Filter table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.31GrouptimerTableGroupcurrentThe collection of timer table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.32GroupipGroupcurrentThe collection of ip objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.33GroupnewTrapDestinationTableGroupcurrentNew Trap destionation table.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.34GroupairconTableGroupcurrentAircon table.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.35GroupinverterGroupTableGroupcurrentThe collection of Inverter Group table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.36GroupeventCtrlChargeTableTableGroupcurrentThe collection of Event Controlled Charge Table Group table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.37GroupbatteryTestTableTableGroupcurrentThe collection of Battery Test Table Group table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.1.38GroupbatteryTestResultTableTableGroupcurrentThe collection of Battery Test Result Table Group table objects.
1.3.6.1.4.1.20246.2.3.1.1.1.1.2NodecontrollerCompl
1.3.6.1.4.1.20246.2.3.1.1.1.1.2.1CompliancecontrollerBasicComplcurrentThe basic implementation requirements for the controller MIB.
1.3.6.1.4.1.20246.2.3.1.1.1.2NodecontrollerObjects
1.3.6.1.4.1.20246.2.3.1.1.1.2.1NodedcSystemInfo
1.3.6.1.4.1.20246.2.3.1.1.1.2.1.1ScalardcSiteNameread-writecurrentAn administratively-assigned site name for this DC-power system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.1.2ScalardcSystemNameread-writecurrentAn administratively-assigned system name for this DC-power system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.1.3ScalardcSystemDateTimeread-writecurrentISO 8601 representation of controller's local date/time. The value is in the format YYYY-MM-DDThh:mm:ss. An example of a valid string is: '2004-10-04T13:45:00'.
1.3.6.1.4.1.20246.2.3.1.1.1.2.1.4ScalardcSoftwareVersionread-onlycurrentThe controller's software version e.g V2.50Build1.
1.3.6.1.4.1.20246.2.3.1.1.1.2.1.5ScalardcCreateInventoryReportread-writecurrentCreate the Inventory Report
1.3.6.1.4.1.20246.2.3.1.1.1.2.2NodedcSystemAlarms
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1TabledcEventHistoryTablenot-accessiblecurrentController's event history table that shows the content of the default log file.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1RowdcEventHistoryEntrynot-accessiblecurrentA particular Event History entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1.1ColumndcEventHistoryIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1.2ColumndcEventHistoryTimestampread-onlycurrentISO8601 timestamp representation of a particular entry in the form YYYY-MM-DDThh:mm:ss.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1.3ColumndcEventHistoryMessageread-onlycurrentEvent message of a particular entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2TabledcAlarmTablenot-accessiblecurrentTable that shows all active sent Traps.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1RowdcAlarmEntrynot-accessiblecurrentA particular active alarm source entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.1ColumndcAlarmIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.2ColumndcAlarmEventCategoryread-onlycurrentSpecifies the type of alarm source.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.3ColumndcAlarmEventNameread-onlycurrentName of a particular alarm source entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.4ColumndcAlarmEventIdentifierread-onlycurrentUnique alarm event identifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.5ColumndcAlarmEventValueread-onlycurrentEvent status that corresponds to alarm event identifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.3ScalardcNumberUrgentAlarmsread-onlycurrentNumber of currently active urgent alarm sources. A zero value indicates that urgent alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.4ScalardcNumberNonUrgentAlarmsread-onlycurrentNumber of currently active non urgent alarm sources. A zero value indicates that non urgent alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.5ScalardcMainsFailureAlarmread-onlycurrentMains failure alarm.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.6ScalardcUrgentAlarmIdentifierread-onlycurrentCurrent unique urgent alarm event identifier. A zero value indicates that urgent alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.7ScalardcUrgentAlarmValueread-onlycurrentCurrent urgent alarm event status that corresponds to the urgent alarm identifier. If the urgent alarm identifier is zero then the alarm value is false.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.8ScalardcNonUrgentAlarmIdentifierread-onlycurrentCurrent unique non urgent alarm event identifier. A zero value indicates that non urgent alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.9ScalardcNonUrgentAlarmValueread-onlycurrentCurrent non urgent alarm event status that corresponds to non urgent alarm identifier. If the non urgent alarm identifier is zero then the alarm value is false.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.10ScalardcUrgentAlarmNameread-onlycurrentCurrent alarm name for urgent alarm that corresponds to urgent alarm identifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.11ScalardcNonUrgentAlarmNameread-onlycurrentCurrent alarm name for active non urgent alarm that corresponds to non urgent alarm identifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12TabledcGenericAlarmTablenot-accessiblecurrentTable that shows ten alarm event assignments that can be configured via WEB interface.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1RowdcGenericAlarmEntrynot-accessiblecurrentA particular generic alarm entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.1ColumndcGenericAlarmIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.2ColumndcGenericAlarmEventNameread-onlycurrentPlain text name of the assigned alarm event. Empty if not configured.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.3ColumndcGenericAlarmEventIdentifierread-onlycurrentUnique numeric identifier of the assigned alarm event. Zero if not configured.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.4ColumndcGenericAlarmEventValueread-onlycurrentCurrent value of the assigned alarm event. Value is false if not configured.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.13ScalardcNumberCriticalAlarmsread-onlycurrentNumber of currently active critical alarm sources. A zero value indicates that critical alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.14ScalardcCriticalAlarmIdentifierread-onlycurrentCurrent unique critical alarm event identifier. A zero value indicates that critical alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.15ScalardcCriticalAlarmValueread-onlycurrentCurrent critical alarm event status that corresponds to the critical alarm identifier. If the critical alarm identifier is zero then the alarm value is false.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.16ScalardcCriticalAlarmNameread-onlycurrentCurrent alarm name for active critical alarm that corresponds to critical alarm identifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.17ScalardcNumberAllAlarmsread-onlycurrentNumber of currently active all alarm sources. A zero value indicates that all alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.18ScalardcAllAlarmIdentifierread-onlycurrentCurrent unique all alarm event identifier. A zero value indicates that all alarm is not active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.19ScalardcAllAlarmValueread-onlycurrentCurrent all alarm event status that corresponds to the all alarm identifier. If the all alarm identifier is zero then the alarm value is false.
1.3.6.1.4.1.20246.2.3.1.1.1.2.2.20ScalardcAllAlarmNameread-onlycurrentCurrent alarm name for active all alarm that corresponds to all alarm identifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3NodedcSystemMonitor
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.1ScalardcSystemVoltageread-onlycurrentThe measured system voltage. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.2ScalardcLoadCurrentread-onlycurrentThe measured load current. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.3ScalardcBatteryCurrentread-onlycurrentThe measured battery current. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.4ScalardcBatteryTemperatureread-onlycurrentThe measured battery temperature. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.5ScalardcChargeStateread-onlycurrentBattery charge state.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.6ScalardcCurrentLimitread-onlycurrentBattery current limit.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.7ScalardcRectifierCurrentread-onlycurrentTotal current of all working rectifier modules. The maximum value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.3.8ScalardcSystemPowerread-onlycurrentCalculated system power. The maximum value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4NodedcRectifier
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.1ScalardcNumberRectifiersread-onlycurrentThe configured number of rectifiers plugged into the system. The maximum number of rectifiersi is 128.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.2ScalardcNumberRectifiersFailureread-onlycurrentNumber of rectifiers that are not properly working.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.3ScalardcNumberRectifiersOkayread-onlycurrentNumber of rectifiers that are properly working.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4TabledcRectifierTablenot-accessiblecurrentTable that shows all currently active rectifier modules.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1RowdcRectifierEntrynot-accessiblecurrentA particular rectifier entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.1ColumndcRectifierIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.2ColumndcRectifierIdentifierread-onlycurrentUnique rectifier identifier. If positioning active the position number scheme is used otherwise the rectifier instance is used to identify a rectifier.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.3ColumndcRectifierSlotStateread-onlycurrentSpecifies state of slots.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.4ColumndcRectifierMainStatusread-onlycurrentSpecifies status of rectifiers.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.5ColumndcRectifierConfigurationread-onlycurrentSpecifies configuration of rectifiers.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.6ColumndcRectifierIoutread-onlycurrentThe measured rectifier output current. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.7ColumndcRectifierPoutread-onlycurrentThe measured rectifier output power. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5TabledcRectifierGroupTablenot-accessiblecurrentTable that shows all available rectifier groups.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1RowdcRectifierGroupEntrynot-accessiblecurrentA particular rectifier group entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.1ColumndcRectifierGroupIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.2ColumndcRectifierGroupNameread-onlycurrentRectifier group name to identify an individual device parameter set.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.3ColumndcRectifierGroupRectifierTyperead-onlycurrentRectifier type defined for this group.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.4ColumndcRectifierGroupDefaultVoltageread-writecurrentThis default voltage is used by rectifiers when there is no connection to ORION.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.5ColumndcRectifierGroupDefaultCurrentLimitread-writecurrentThis default current limit is used by rectifiers when there is no connection to ORION.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.6ColumndcRectifierGroupDefaultPowerLimitread-writecurrentThis default power limit is used by rectifiers when there is no connection to ORION.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.7ColumndcRectifierGroupInputLowOffread-writecurrentThreshold for low AC input voltage. It can is used to adjust the behaviour of the power system to the available AC network limitation.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.8ColumndcRectifierGroupInputLowOnread-writecurrentFor details see dcRectifierGroupInputLowOff.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.9ColumndcRectifierGroupStartupVoltageread-writecurrentStartup parameters are the values that rectifiers use during the start-up phase. These parameters allow starting the system smoothly after a mains failure even…
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.10ColumndcRectifierGroupStartupCurrentLimitread-writecurrentFor details see dcRectifierGroupStartupVoltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.11ColumndcRectifierGroupStartupPowerLimitread-writecurrentFor details see dcRectifierGroupStartupVoltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.12ColumndcRectifierGroupStartupLimitTimeread-writecurrentFor details see dcRectifierGroupStartupVoltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.13ColumndcRectifierGroupPowerupDelayread-writecurrentThis parameter is used after a mains failure to delay the start-up of all rectifiers.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.14ColumndcRectifierGroupPowerupTimeread-writecurrentThis parameter used after a mains failure and allows defining a time within all rectifiers needs to start-up one after another.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.15ColumndcRectifierGroupUmaxOffread-writecurrentOvervoltage protection value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6NodedcRectifierFunctions
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.1NodedcEfficiencyCycling
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.1.1ScalardcEfficiencyCyclingEnabledread-writecurrentEnable/disable efficiency cycling.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.1.2ScalardcLimitSwitchingTimesread-writecurrentEnable/disable limit switching times.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.1.3ScalardcForceCyclingTyperead-writecurrentIf a period is set, then the Force Rectifier Cycling will occur once every period.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.1.4ScalardcMinimumPowerReserveread-writecurrentMaximum load setup.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.1.5ScalardcMinimumRectifierPowerread-writecurrentMinimum load setup.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2NodedcPowerLimitation
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1TabledcPowerLimitationTablenot-accessiblecurrentTable that shows parameters of the available power limitation functions.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1RowdcPowerLimitationEntrynot-accessiblecurrentA particular power limitation entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1.1ColumndcPowerLimitationIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1.2ColumndcPowerLimitationEventNameread-onlycurrentName of the power limitation event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1.3ColumndcPowerLimitationStatusread-onlycurrentStatus of power limitation.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1.4ColumndcPowerLimitationTyperead-onlycurrentPower limitation type.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1.5ColumndcMaxTotalRectifierPowerread-writecurrentLimit used for power limitation.
1.3.6.1.4.1.20246.2.3.1.1.1.2.4.6.2.1.1.6ColumndcPowerLimitationNoBatteryDischargeread-writecurrentEnable/disable no battery discharge during power limitation.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5NodedcBattery
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1NodedcFloatCharge
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1.1ScalardcUsys20read-writecurrentVoltage to regulate to at 20°C(68°F). If temperature compensation is used, this voltage will vary.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2NodedcBatteryTest
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1NodedcBatteryTestParameter
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.1ScalardcBatteryTestUsupportread-onlyobsoleteSupport charge voltage for the battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.2ScalardcBatteryTestDurationread-onlyobsoleteBattery test duration.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.3ScalardcBatteryTestIntervalread-onlyobsoleteMinimal time between programmed battery tests as start condition.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.4ScalardcBatteryTestDischargeCurrentread-onlyobsoleteBattery discharge current. The maximum value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.5ScalardcBatteryTestMinDurationread-onlyobsoleteMinimum battery test duration during which time a battery test is not stopped in case of a voltage below the support voltage or a current difference higher tha…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.6ScalardcBatteryTestVoltageWithinUfloatread-onlyobsoleteBattery voltage must be within Ufloat +/- set voltage for a given time (see also dcBatteryTestVoltageWithinUfloatPeriod) in order to start a battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.7ScalardcBatteryTestVoltageWithinUfloatPeriodread-onlyobsoleteFor details see dcBatteryTestVoltageWithinUfloat parameter.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.8ScalardcBatteryTestTempFromread-onlyobsoleteBattery temperature must be within temperature range given by dcBatteryTestTempFrom and dcBatteryTestTempTo, so that a battery test can be started.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.9ScalardcBatteryTestTempToread-onlyobsoleteFor details see dcBatteryTestTempFrom parameter.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.10ScalardcBatteryTestIntervalEnabledread-onlyobsoleteEnable/disable interval. For more details see dcBatteryTestInterval.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.11ScalardcBatteryTestStartTimeFromread-onlyobsoleteDefines start time window for battery test. The possible time window is defined as the range between dcBatteryTestStartTimeFrom and dcBatteryTestStartTimeTo. T…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.12ScalardcBatteryTestStartTimeToread-onlyobsoleteFor details see dcBatteryTestStartTimeFrom.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2NodedcBatteryTestResults
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2.1ScalardcBatteryTestDateTimeread-onlyobsoleteISO 8601 representation of the last performed battery test. The value is in the format YYYY-MM-DDThh:mm:ss. This parameter is valid only if there is a test res…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2.2ScalardcBatteryTestResultread-onlyobsoleteResult of last performed battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2.3ScalardcBatteryTestEndVoltageread-onlyobsoleteSystem voltage at the end of the last performed battery test. The maximum value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.3ScalardcBatteryTestControlread-onlyobsoleteStart/stop of battery test. This special charge mode is used to check the capacity of a battery. Please note that a battery test can be started even if the bat…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.4ScalardcBatteryTestStatusread-onlyobsoleteStatus of battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.5ScalardcBatteryTestFailureEventread-onlyobsoleteReset battery test failure event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.6ScalardcBatteryTestTyperead-onlyobsoleteBattery test type used.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7TabledcBatteryTestTablenot-accessiblecurrentLists all the configured Battery Tests elements.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1RowdcBatteryTestTableEntrynot-accessiblecurrent
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.1ColumndcBatteryTestTableIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.2ColumndcBatteryTestTablePriorityread-onlycurrentPriority of the battery test. Used as index for this table.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.3ColumndcBatteryTestTableNameread-onlycurrentBattery test name.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.4ColumndcBatteryTestTableTyperead-writecurrentBattery test type used.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.5ColumndcBatteryTestTableStatusread-onlycurrentCurrent status of battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.6ColumndcBatteryTestTableUsupportread-writecurrentSupport charge voltage for the battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.7ColumndcBatteryTestTableDurationread-writecurrentBattery test duration. Zero indicates that this value is not set.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.8ColumndcBatteryTestTableIntervalread-writecurrentMinimal time between programmed battery tests as start condition.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.9ColumndcBatteryTestTableDischargeCurrentread-writecurrentBattery discharge current. The maximum value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.10ColumndcBatteryTestTableMinDurationread-writecurrentMinimum battery test duration during which time a battery test is not stopped in case of a voltage below the support voltage or a current difference higher tha…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.11ColumndcBatteryTestTableVoltageWithinUfloatread-writecurrentBattery voltage must be within Ufloat +/- set voltage for a given time (see also dcBatteryTestTableVoltageWithinUfloatPeriod) in order to start a battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.12ColumndcBatteryTestTableVoltageWithinUfloatPeriodread-writecurrentFor details see dcBatteryTestTableVoltageWithinUfloat parameter.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.13ColumndcBatteryTestTableTempFromread-writecurrentBattery temperature must be within temperature range given by dcBatteryTestTableTempFrom and dcBatteryTestTableTempTo, so that a battery test can be started.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.14ColumndcBatteryTestTableTempToread-writecurrentFor details see dcBatteryTestTableTempFrom parameter.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.15ColumndcBatteryTestTableIntervalEnabledread-writecurrentEnable/disable interval. For more details see dcBatteryTestTableInterval.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.16ColumndcBatteryTestTableStartTimeFromread-writecurrentDefines start time window for battery test. The possible time window is defined as the range between dcBatteryTestTableStartTimeFrom and dcBatteryTestTableStar…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.17ColumndcBatteryTestTableStartTimeToread-writecurrentFor details see dcBatteryTestTableStartTimeFrom.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.18ColumndcBatteryTestTableControlread-writecurrentManual Start/stop of battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.19ColumndcBatteryTestTableFailureEventread-writecurrentReset the battery test failure event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8TabledcBatteryTestResultTablenot-accessiblecurrentLists the results for all configured Battery Test elements.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1RowdcBatteryTestResultTableEntrynot-accessiblecurrent
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1.1ColumndcBatteryTestResultTableIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1.2ColumndcBatteryTestResultTablePriorityread-onlycurrentPriority of the battery test. Used as index for this table.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1.3ColumndcBatteryTestResultTableNameread-onlycurrentBattery test name.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1.4ColumndcBatteryTestResultTableDateTimeread-onlycurrentISO 8601 representation of the last performed battery test. The value is in the format YYYY-MM-DDThh:mm:ss. This parameter is valid only if there is a test res…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1.5ColumndcBatteryTestResultTableResultread-onlycurrentResult of last performed battery test.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.8.1.6ColumndcBatteryTestResultTableEndVoltageread-onlycurrentSystem voltage at the end of the last performed battery test. The maximum value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3NodedcBatteryParameter
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.1ScalardcTotalBatteryCapacityread-onlycurrentTotal battery capacity for all available batteries.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.2TabledcBatteryStringTablenot-accessiblecurrentTable that shows parameters of the available battery strings.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.2.1RowdcBatteryStringEntrynot-accessiblecurrentA particular battery string entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.2.1.1ColumndcBatteryStringIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.2.1.2ColumndcBatteryStringNameread-onlycurrentName of the battery string.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.2.1.3ColumndcBatteryStringMaxIBattread-writecurrentMaximum battery charging current for this string. This parameter can be set individually for each battery. ORION then regulates the system voltage such that th…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.2.1.4ColumndcBatteryStringCapacityread-writecurrentCapacity of battery can be defined individually. It is used to calculate the expected backup time of the system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.3NodedcLossOfBackupTime
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.3.1ScalardcLossOfBackupTimeEnabledread-writecurrentEnable/disable loss of backup time functionality.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.3.2ScalardcLossOfBackupTimeStatusread-onlycurrentStatus of loss of backup time functionality.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.3.3ScalardcExpectedBackupTimeread-writecurrentExpected backup time value. Based on the given value for the parameter expected backup time, the corresponding maximum discharge current is calculated.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4TabledcBatteryLithiumTablenot-accessiblecurrentTable that shows parameters of the available Lithium batteries.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1RowdcBatteryLithiumEntrynot-accessiblecurrentA particular Lithium battery entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.1ColumndcBatteryLithiumIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.2ColumndcBatteryLithiumNameread-onlycurrentName of the Lithium battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.3ColumndcBatteryLithiumMainStateread-onlycurrentLithium Battery Main State.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.4ColumndcBatteryLithiumSubStateread-onlycurrentLithium Battery Sub-State.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.5ColumndcBatteryLithiumCurrentread-onlycurrentLithium battery current
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.6ColumndcBatteryLithiumStateOfChargeread-onlycurrentLithium battery state of charge
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.7ColumndcBatteryLithiumInstallationDateread-onlycurrentInstallation Date of the Lithium battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.4.1.8ColumndcBatteryLithiumSoHread-onlycurrentLithium battery state of health.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5TabledcBatteryLifePredictionTablenot-accessiblecurrentTable that shows parameters of life prediction.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5.1RowdcBatteryLifePredictionEntrynot-accessiblecurrentA particular life prediction entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5.1.1ColumndcBatteryLifePredictionIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5.1.2ColumndcBatteryLifePredictionNameread-onlycurrentName of the battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5.1.3ColumndcBatteryLifePredictionRemainingDaysread-onlycurrentRemaining days of battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5.1.4ColumndcBatteryLifePredictionInstallationDateread-onlycurrentInstallation date of battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.5.1.5ColumndcBatteryLifePredictionSoHread-onlycurrentBattery state of health.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.6ScalardcBatteryLifePredictionStatusread-onlycurrentBattery life prediction status.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.7ScalardcBatteryChargingCurrentLimitEnableread-writecurrentEnables the Battery Charging Current limit.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.8ScalardcBatteryTotalChargingCurrentLimitEnableread-writecurrentEnables battery charging current limit for total lithium batteries.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.9ScalardcBatteryTotalMaxIBattread-writecurrentMaximum battery charging current for total lithium batteries.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4NodedcEqualize
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.1ScalardcEqualizeControlread-writecurrentStart/stop of battery equalize which is a special charge mode that applies a higher voltage to the batteries than the float charge. This ensures that the cells…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.2ScalardcEqualizeStatusread-onlycurrentCurrent status of battery equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.3ScalardcEqualizeEnabledread-writecurrentEnable/disable equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4NodedcEqualizeParameter
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.1ScalardcEqualizeVoltageread-writecurrentVoltage used for equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.2ScalardcEqualizeDurationread-writecurrentDuration of equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.3ScalardcEqualizeUseBattRoomFanEnabledread-writecurrentEnable/disable battery room fan during equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.4ScalardcEqualizeLeadTimeread-writecurrentLead time for equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.5ScalardcEqualizeTimeLagread-writecurrentTime lag for equalize.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.6ScalardcEqualizeIntervalread-writecurrentInterval for equalize as start condition.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.7ScalardcEqualizeStartTimeIntervalFromread-writecurrentDefines start time window for equqlize. The possible time window is defined as the range between dcEqualizeStartTimeIntervalFrom and dcEqualizeStartTimeInterva…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.8ScalardcEqualizeStartTimeIntervalToread-writecurrentFor detail see dcEqualizeStartTimeIntervalFrom.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.4.9ScalardcEqualizeInhibitAfterBoostread-writecurrentInhibit after boost as start condition.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5NodedcBoostCharge
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.1ScalardcBoostChargeControlread-writecurrentStart/stop of boost charge which is a special charge mode that applies a higher voltage to the batteries than the float charge. This mode is started after a di…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.2ScalardcBoostChargeStatusread-onlycurrentCurrent status of boost charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.3ScalardcBoostChargeTyperead-writecurrentBoost charge type.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4NodedcBoostChargeParameter
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.1ScalardcBoostChargeVoltageread-writecurrentVoltage used for boost charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.2ScalardcBoostChargeMaxDurationread-writecurrentDefines the maximum allowed time for boost charge to prevent that the battery is charged forever.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.3ScalardcBoostChargeUseBattRoomFanEnabledread-writecurrentEnable/disable battery room fan during boost charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.4ScalardcBoostChargeTimeLagread-writecurrentTime lag used for boost charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.5ScalardcBoostChargeIstartread-writecurrentFor current based boost charge, the parameters Istart and Istop are the battery current values at which boost charge starts or stops.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.6ScalardcBoostChargeIstopread-writecurrentFor details see dcBoostChargeIstart.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.7ScalardcBoostChargeInhibitTimeread-writecurrentA start condition for all types of boost charge. It defines the time from last boost charge stop to the next acceptable boost charge start.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.4.8ScalardcBoostChargeSoCBelowread-writecurrentA start condition for all types of boost charge. It defines the State of Charge (SoC) start condition.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6NodedcSystemVoltageSupervision
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.1ScalardcUaMaxread-writecurrentIf the system voltage is outside the range specified by the values UaMin (lower alarm voltage)/UaMax (upper alarm voltage), the system event 'S Ua low'/'S Ua h…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.2ScalardcUaMinread-writecurrentFor details see dcUaMax.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.3ScalardcUsMaxread-writecurrentIf the voltage is outside the range defined by the parameters UsMin (lower safety voltage)/UsMax (upper safety voltage), the system event 'S Us low'/'S Us high…
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.4ScalardcUsMinread-writecurrentFor details see dcUsMax.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.5ScalardcBoDread-writecurrentVoltage threshold for Battery on Discharge alarm.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.6ScalardcHysteresisread-writecurrentHysteresis used for Ua and Us.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.7ScalardcSuppressUaLowEnabledread-writecurrentSuppress Ua Low alarm during mains failure.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.8ScalardcSuppressUsLowEnabledread-writecurrentSuppress Us Low alarm during mains failure.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.6.9ScalardcEnableUsTempCompread-writecurrentCheckbox to enable the automatic temperature compensation for the Us thresholds (Us min, Us max).
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7NodedcEvtCtrlCharge
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.1ScalardcEvtCtrlChargeStatusread-onlyobsoleteEvent control charge status.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.2ScalardcEvtCtrlChargeTyperead-onlyobsoleteSelected event control charge type.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.3NodedcEvtCtrlChargeParameter
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.3.1ScalardcEvtCtrlChargeVoltageread-onlyobsoleteVoltage used for event control charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.3.2ScalardcEvtCtrlChargeTempCompEnabledread-onlyobsoleteEnable/disable temperature compensation during event control obsolete.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.3.3ScalardcEvtCtrlChargeMaxIBattread-onlyobsoleteMax. IBatt used for event control charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4TabledcEventControlledChargeTablenot-accessiblecurrentLists all the configured Event Controlled Charges elements.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1RowdcEventControlledChargeTableEntrynot-accessiblecurrent
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.1ColumndcEventControlledChargeTableIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.2ColumndcEventControlledChargeTablePriorityread-onlycurrentPriority of the event controlled charge instance. Used as index for this table.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.3ColumndcEventControlledChargeTableNameread-onlycurrentEvent control charge name.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.4ColumndcEventControlledChargeTableActivationInputread-onlycurrentEvent used to activate the controlled charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.5ColumndcEventControlledChargeTableStatusread-onlycurrentEvent control charge current status.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.6ColumndcEventControlledChargeTableTyperead-writecurrentSelected event control charge type.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.7ColumndcEventControlledChargeTableVoltageread-writecurrentVoltage used for event control charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.8ColumndcEventControlledChargeTableMaxIBattread-writecurrentMax. IBatt used for event control charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.7.4.1.9ColumndcEventControlledChargeTableTempCompEnabledread-writecurrentEnable/disable temperature compensation during event control charge.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8NodedcTempComp
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.1ScalardcTempCompTyperead-writecurrentEnable/disable battery temperature compensation.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.2ScalardcSloperead-writecurrentTemperature compensation coefficient for system voltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.3ScalardcStartTempread-writecurrentLower limit for the area in which the temperature compensation is active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.4ScalardcStopTempread-writecurrentUpper limit for the area in which the temperature compensation is active.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.5ScalardcMaxVoltageread-writecurrentUpper limit for the area in which the temperature compensation is not controlling the system voltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.6ScalardcLowStopVoltageread-writecurrentThe temperature compensation will not control the charging voltage above this parameter at low temperatures.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.7ScalardcLowStartTempread-writecurrentHigh temperature limit of the lower range.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.8ScalardcLowTempSloperead-writecurrentCompensation factor applied inside the low range.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.9ScalardcHighStartTempread-writecurrentThe low temperature limit of the higher range.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.10ScalardcHighTempSloperead-writecurrentCompensation factor applied inside the high range.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.11ScalardcHighStopVoltageread-writecurrentThe temperature compensation will not control the charging voltage below this parameter at high temperatures.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.12ScalardcRunawayTempread-writecurrentA threshold for detecting thermal runaway of the battery.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.8.13ScalardcRunawayVoltageread-writecurrentCharging voltage while Runaway Temp has been exceeded.
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.9NodedcTempSupervision
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.9.1ScalardcHighTempread-writecurrentTemperature threshold for high battery temperature alarm 10°C ... 70°C(50°F ... 158°F)
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.9.2ScalardcHighTempHystread-writecurrentHysteresis for the High Temp 1°C ... 70°C(33.8°F ... 158°F)
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.10NodedcBatteryType
1.3.6.1.4.1.20246.2.3.1.1.1.2.5.10.1ScalardcBatteryTypeSelectread-onlycurrentSelect Battery Type.
1.3.6.1.4.1.20246.2.3.1.1.1.2.6NodedcInputOutput
1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1TabledcControlEventTablenot-accessiblecurrentTable that shows ten output event assignments that can be configured via WEB interface.
1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1RowdcControlEventEntrynot-accessiblecurrentA particular generic output entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.1ColumndcControlEventIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.2ColumndcControlEventNameread-onlycurrentPlain text name of the assigned control event. Empty if not configure.
1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.3ColumndcControlEventIdentifierread-onlycurrentUnique numeric identifier of the assigned control event. Zero if not configured.
1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.4ColumndcControlEventValueread-writecurrentCurrent value of the assigned control event. Value is false if not configured.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7NodedcMisc
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1TabledcTrapDestinationTablenot-accessibleobsoleteTrap table that shows all configured trap destinations.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1RowdcTrapDestinationEntrynot-accessibleobsoleteA particular trap destination entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.1ColumndcTrapDestinationIndexnot-accessibleobsoleteTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.2ColumndcTrapDestinationIpread-writeobsoleteIP address of the trap destination. Value is 0.0.0.0 if IP address is not configured.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.3ColumndcTrapDestinationPortread-writeobsoletePort number of the trap destination. By default port 162 is used.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.4ColumndcTrapDestinationUserread-writeobsoleteUser of the trap destination.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.2ScalardcFileProcessingStatusread-onlycurrentFile processing status for software and setup up/downloads.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.4ScalardcResendActiveAlarmTrapsread-writecurrentResend all active Urgent, Non Urgent, and Critical Alarm Traps.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.5ScalardcRebootControllerread-writecurrentReboot the Controller.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.6TabledcTrapDestinationv2Tablenot-accessiblecurrentTrap table that shows all configured trap destinations.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.6.1RowdcTrapDestinationv2Entrynot-accessiblecurrentA specific trap destination entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.6.1.1ColumndcTrapDestinationv2Indexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.6.1.2ColumndcTrapDestinationv2read-writecurrentAddress of the trap destination.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.6.1.3ColumndcTrapDestinationv2Portread-writecurrentPort number of the trap destination.
1.3.6.1.4.1.20246.2.3.1.1.1.2.7.6.1.4ColumndcTrapDestinationv2Userread-writecurrentUser of the trap destination.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8NodedcConfig
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.1TabledcDefaultLogEventTablenot-accessiblecurrentEvent config table for default log.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.1.1RowdcDefaultLogEventEntrynot-accessiblecurrentA particular event entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.1.1.1ColumndcDefaultLogEventIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.1.1.2ColumndcDefaultLogEventNameread-onlycurrentPlain text name of the event that can be logged.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.1.1.3ColumndcDefaultLogEventLoggedread-writecurrentIf yes then this event is logged otherwise not.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.2TabledcEventProcessingEventTablenot-accessiblecurrentEvent config table for event ORs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.2.1RowdcEventProcessingEventEntrynot-accessiblecurrentA particular event entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.2.1.1ColumndcEventProcessingEventIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.2.1.2ColumndcEventProcessingEventNameread-onlycurrentPlain text name of the input event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.2.1.3ColumndcEventProcessingEventAssignedread-writecurrentIf yes then the input event is assigned to the selected event. Please note, that it is only possible to change assignment of event ORs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.2.1.4ColumndcEventProcessingEventTyperead-onlycurrentType of the input event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.3ScalardcEventProcessingEventSelectedread-writecurrentReference to dcEventProcessingEventIndex in order to select a specific event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4TabledcLvdTablenot-accessiblecurrentTable lists all available LVDs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1RowdcLvdEntrynot-accessiblecurrentA particular LVD entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.1ColumndcLvdIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.2ColumndcLvdNameread-onlycurrentName of the LVD.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.3ColumndcLvdDisconnectDelayread-writecurrentTime delay from the activation of the source event, after which the LVD event is switched. The value is in the format 'hh:mm:ss'.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.4ColumndcLvdTyperead-onlycurrentType of the LVD.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.5ColumndcLvdVoltageThresholdread-writecurrentVoltage threshold for U and t controlled type LVD. Only available in U and t Controlled Type LVDs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.6ColumndcLvdVoltageHysteresisread-writecurrentVoltage Hysteresis for U and t controlled type LVD. Only available in U and t Controlled Type LVDs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.7ColumndcLvdControlEventread-onlycurrentControl (previously named Source) Event for the LVD action. Only available in Event Controlled Type LVDs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.4.1.8ColumndcLvdMonitoringEventread-onlycurrentMonitoring Event. Only available in Event Controlled Type LVDs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5TabledcEventDefinitionTablenot-accessiblecurrentTable that shows twenty threshold event assignments that can be configured via WEB interface.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5.1RowdcEventDefinitionEntrynot-accessiblecurrentA particular generic EventDefinition entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5.1.1ColumndcEventIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5.1.2ColumndcEventNameread-onlycurrentName of the threshold.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5.1.3ColumndcThresholdread-writecurrentValue of the threshold.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5.1.4ColumndcThresholdHysteresisread-writecurrentHysteresis of the threshold.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.5.1.5ColumndcUnitread-onlycurrentUnit of the threshold
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.6TabledcFilterTablenot-accessiblecurrentTable that shows twenty filter event assignments that can be configured via WEB interface.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.6.1RowdcFilterEntrynot-accessiblecurrentA particular generic Filter entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.6.1.1ColumndcFilterIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.6.1.2ColumndcFilterNameread-onlycurrentName of the Filter.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.6.1.3ColumndcTrueForMinread-writecurrentTrue for Min.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.6.1.4ColumndcFalseForMinread-writecurrentFalse for Min.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7TabledcTimerTablenot-accessiblecurrentTable that shows twenty timer event assignments that can be configured via WEB interface.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1RowdcTimerEntrynot-accessiblecurrentA particular generic Timer entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.1ColumndcTimerIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.2ColumndcTimerNameread-onlycurrentName of the Timer.
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.3ColumndcStartTimeread-writecurrentStart Time(hh:mm).
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.4ColumndcStartDaySuread-writecurrentIs Sunday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.5ColumndcStartDayMoread-writecurrentIs Monday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.6ColumndcStartDayTuread-writecurrentIs Tuesday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.7ColumndcStartDayWeread-writecurrentIs Wednesday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.8ColumndcStartDayThread-writecurrentIs Thursday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.9ColumndcStartDayFrread-writecurrentIs Friday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.10ColumndcStartDaySaread-writecurrentIs Saturday Start Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.11ColumndcEndTimeread-writecurrentEnd Time(hh:mm).
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.12ColumndcEndDaySuread-writecurrentIs Sunday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.13ColumndcEndDayMoread-writecurrentIs Monday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.14ColumndcEndDayTuread-writecurrentIs Tuesday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.15ColumndcEndDayWeread-writecurrentIs Wednesday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.16ColumndcEndDayThread-writecurrentIs Thursday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.17ColumndcEndDayFrread-writecurrentIs Friday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.8.7.1.18ColumndcEndDaySaread-writecurrentIs Saturday End Day?
1.3.6.1.4.1.20246.2.3.1.1.1.2.9NodedcMeasurement
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1TabledcMeasurementTablenot-accessiblecurrentTable lists all available measurements.
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1.1RowdcMeasurementEntrynot-accessiblecurrentA particular measurement entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1.1.1ColumndcMeasurementIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1.1.2ColumndcMeasurementNameread-onlycurrentName of the measurement.
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1.1.3ColumndcMeasurementValueread-onlycurrentUnscaled calibrated value of the measurement.
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1.1.4ColumndcMeasurementScaleFactorread-onlycurrentScale factor as power of 10 to be multiplied with measurement value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.9.1.1.5ColumndcMeasurementUnitread-onlycurrentUnit of the measurement.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10NodedcMeterPanel
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.1TabledcMeterPanelEventTablenot-accessiblecurrentTable lists all available meter panel events.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.1.1RowdcMeterPanelEventEntrynot-accessiblecurrentA particular meter panel event entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.1.1.1ColumndcMeterPanelEventIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.1.1.2ColumndcMeterPanelEventNameread-onlycurrentName of the event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.1.1.3ColumndcMeterPanelEventValueread-onlycurrentValue of the event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.1.1.4ColumndcMeterPanelEventHourMeterValueread-onlycurrentValue of the hour meter event.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.2TabledcMeterPanelMeasurementTablenot-accessiblecurrentTable lists all available meter panel Measurements.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.2.1RowdcMeterPanelMeasurementEntrynot-accessiblecurrentA particular meter panel Measurement entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.2.1.1ColumndcMeterPanelMeasurementIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.2.1.2ColumndcMeterPanelMeasurementNameread-onlycurrentName of the Measurement.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.2.1.3ColumndcMeterPanelMeasurementValueread-onlycurrentValue of the Measurement.
1.3.6.1.4.1.20246.2.3.1.1.1.2.10.2.1.4ColumndcMeterPanelMeasurementUnitread-onlycurrentUnit of the measurement.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11NodedcPVC
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.1ScalardcNumberPVCsread-onlycurrentThe configured number of PVCs plugged into the system. The maximum number of PVC is 32.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.2ScalardcNumberPVCsFailureread-onlycurrentNumber of PVCs that are not properly working.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.3ScalardcNumberPVCsOkayread-onlycurrentNumber of PVCs that are properly working.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4TabledcPVCTablenot-accessiblecurrentTable that shows all currently active PVC modules.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1RowdcPVCEntrynot-accessiblecurrentA particular PVC entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.1ColumndcPVCIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.2ColumndcPVCIdentifierread-onlycurrentUnique PVC identifier. If positioning active the position number scheme is used otherwise the PVC instance is used to identify a PVC.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.3ColumndcPVCSlotStateread-onlycurrentSpecifies state of slots.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.4ColumndcPVCMainStatusread-onlycurrentSpecifies status of PVCs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.5ColumndcPVCSubStatusread-onlycurrentSpecifies sub-status of PVCs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.6ColumndcPVCConfigurationread-onlycurrentSpecifies configuration of PVCs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.7ColumndcPVCIoutread-onlycurrentThe measured PVC output current. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.8ColumndcPVCUoutread-onlycurrentThe measured PVC output voltage. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.9ColumndcPVCIinread-onlycurrentThe measured PVC input current. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.4.1.10ColumndcPVCUinread-onlycurrentThe measured PVC input voltage. The max. value 2147483647 is used to indicate an invalid value.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5TabledcPVCGroupTablenot-accessiblecurrentTable that shows all available PVC groups.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1RowdcPVCGroupEntrynot-accessiblecurrentA particular PVC group entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.1ColumndcPVCGroupIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.2ColumndcPVCGroupPVCTyperead-onlycurrentPVC type defined for this group.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.3ColumndcPVCGroupVoltageread-writecurrentThis default voltage is used by PVCs when there is no connection to ORION.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.4ColumndcPVCGroupVPGMread-writecurrentThis is offset voltage used by PVCs.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.5ColumndcPVCGroupInputLowOffread-writecurrentThreshold for low input voltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.6ColumndcPVCGroupInputLowOnread-writecurrentThreshold for low input voltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.7ColumndcPVCGroupStartUpDelayread-writecurrentThis parameter is power up time of PVC that can be defined.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.8ColumndcPVCGroupOvpLimitread-writecurrentThis voltage defines the maximum allowed DC-voltage.
1.3.6.1.4.1.20246.2.3.1.1.1.2.11.5.1.9ColumndcPVCGroupAlarmDelayread-writecurrentThis parameter can be used for suppressing alarms during night time.
1.3.6.1.4.1.20246.2.3.1.1.1.2.12NodedcInventory
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1TabledcInventoryTablenot-accessiblecurrentController's inventory table that shows all inventory information.
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1RowdcInventoryEntrynot-accessiblecurrentA particular inventory entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.1ColumndcInventoryIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.2ColumndcInventoryTyperead-onlycurrentModule type
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.3ColumndcInventoryNameread-onlycurrentModule name
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.4ColumndcInventorySwVersionread-onlycurrentModule software vision
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.5ColumndcInventoryBuildVersionread-onlycurrentModule software build vision
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.6ColumndcInventoryPartNbread-onlycurrentModule part number
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.7ColumndcInventorySerialNbread-onlycurrentModule serial number
1.3.6.1.4.1.20246.2.3.1.1.1.2.12.1.1.8ColumndcInventoryTopLevelread-onlycurrentModule top level
1.3.6.1.4.1.20246.2.3.1.1.1.2.13NodedcIP
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.1NodedcIPv4
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.1.1ScalardcIPv4Addressread-onlycurrentThe IP address in IPv4.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.1.2ScalardcIPv4SubnetMaskread-onlycurrentThe subnet mask address in IPv4.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.1.3ScalardcIPv4Gatewayread-onlycurrentGateway Address in IPv4.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.1.4ScalardcIPv4DNSread-onlycurrentThe IP of Domain Name Server in IPv4.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.2NodedcIPv6
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.2.1ScalardcIPv6LinkLocalAddressread-onlycurrentLink Local address.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.2.2ScalardcIPv6Addressread-onlycurrentThe IP address in IPv6.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.2.3ScalardcIPv6Gatewayread-onlycurrentGateway address in IPv6.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.2.4ScalardcIPv6DNSAutoread-onlycurrentThe IP of automatic Domain Name Server in IPv6.
1.3.6.1.4.1.20246.2.3.1.1.1.2.13.2.5ScalardcIPv6DNSManualread-onlycurrentThe IP of manual Domain Name Server in IPv6.
1.3.6.1.4.1.20246.2.3.1.1.1.2.14NodedcAircon
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1TabledcAirconTablenot-accessiblecurrentAircon table that shows all Aircon and cooling plan information.
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1RowdcAirconEntrynot-accessiblecurrentA particular Aircon entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.1ColumndcAirconIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.2ColumndcCoolingPlanIndexnot-accessiblecurrentCooling plan index
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.3ColumndcAirconNameread-onlycurrentAircon module name
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.4ColumndcAirconMainStatusread-onlycurrentAircon module main status
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.5ColumndcAirconSubStatusread-onlycurrentAircon module sub status
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.6ColumndcAirconConfigurationread-onlycurrentModule configuration status
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.7ColumndcAirconPlanNameread-onlycurrentThe name of cooling plan
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.8ColumndcAirconRoomTempread-onlycurrentRoom temperature
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.9ColumndcCoolingPlanActivationInputread-onlycurrentThe input event for activate cooling plan
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.10ColumndcCoolingPlanPriorityread-onlycurrentCooling plan priority
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.11ColumndcCoolingPlanStatusread-onlycurrentCooling plan status
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.12ColumndcCoolingPlanTargetTempread-writecurrentCooling plan target temperature. The range is 25°C ... 40°C(77°F ... 104°F).
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.13ColumndcCoolingPlanOperatingModeread-writecurrentCooling plan operating mode
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.14ColumndcCoolingPlanStandbyFanSpeedread-writecurrentCooling plan standby fan speed
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.15ColumndcCoolingPlanHeaterStartTempread-writecurrentCooling plan heater start temperature. The range is -10°C ... 15°C(14°F ... 59°F).
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.16ColumndcCoolingPlanHeaterHystread-writecurrentCooling plan heater start temperature hysteresis. The range is 1°C ... 10°C(1.8°F ... 18°F).
1.3.6.1.4.1.20246.2.3.1.1.1.2.14.1.1.17ColumndcCoolingPlanHeaterControlread-writecurrentCooling plan heater control mode
1.3.6.1.4.1.20246.2.3.1.1.1.2.15NodedcInverter
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1TabledcInverterGroupTablenot-accessiblecurrentTable that shows all available Inverter groups.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1RowdcInverterGroupEntrynot-accessiblecurrentA particular Inverter group entry.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.1ColumndcInverterGroupIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.2ColumndcInverterGroupStateread-onlycurrentThis is the alarm state of the inverter system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.3ColumndcInverterGroupLoadPositionread-onlycurrentShows where is the load positioned in the system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.4ColumndcInverterGroupNbrOfConfigInvertersread-onlycurrentThe system is configure to operate this number of inverters at maximum.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.5ColumndcInverterGroupNbrOfPresentInvertersread-onlycurrentNumber of inverters actually present in the system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.6ColumndcInverterGroupPhaseread-onlycurrentThis is the alarm state of the inverter system.
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.7ColumndcInverterGroupDcVoltageread-onlycurrentInput DC voltage
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.8ColumndcInverterGroupInputDcPowerread-onlycurrentInput DC Power
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.9ColumndcInverterGroupInputVoltage1read-onlycurrentInput voltage line 1
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.10ColumndcInverterGroupInputVoltage2read-onlycurrentInput voltage line 2 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.11ColumndcInverterGroupInputVoltage3read-onlycurrentInput voltage line 3 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.12ColumndcInverterGroupInputApparentPower1read-onlycurrentInput power line 1
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.13ColumndcInverterGroupInputApparentPower2read-onlycurrentInput power line 2 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.14ColumndcInverterGroupInputApparentPower3read-onlycurrentInput power line 3 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.15ColumndcInverterGroupInputFrequencyread-onlycurrentInput frequency
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.16ColumndcInverterGroupOutputVoltage1read-onlycurrentOutput voltage line 1
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.17ColumndcInverterGroupOutputVoltage2read-onlycurrentOutput voltage line 2 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.18ColumndcInverterGroupOutputVoltage3read-onlycurrentOutput voltage line 3 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.19ColumndcInverterGroupOutputApparentPower1read-onlycurrentOutput apparent power line 1
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.20ColumndcInverterGroupOutputApparentPower2read-onlycurrentOutput apparent power line 2 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.21ColumndcInverterGroupOutputApparentPower3read-onlycurrentOutput apparent power line 3 - in three phase system only
1.3.6.1.4.1.20246.2.3.1.1.1.2.15.1.1.22ColumndcInverterGroupOutputFrequencyread-onlycurrentOutput frequency
1.3.6.1.4.1.20246.2.3.1.1.1.3NodecontrollerEvents
1.3.6.1.4.1.20246.2.3.1.1.1.3.1NodecontrollerEventObjects
1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0NodecontrollerEventsV2
1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0.1NotificationsystemNonUrgentAlarmcurrentThe controller reports that one or more elements have changed into none urgent alarm state.
1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0.2NotificationsystemUrgentAlarmcurrentThe controller reports that one or more elements have changed into urgent alarm state.
1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0.3NotificationsystemCriticalAlarmcurrentThe controller reports that one or more elements have changed into critical alarm state.
1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0.4NotificationsystemAllAlarmcurrentThe controller reports that one Alarm Event state has changed.
MIB Viewer