OS-IP-SLA-MIB
103 objects
IP SLA MIB.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| OS-COMMON-TC-MIB | oaOptiSwitch |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- RFC2571 MODULE-COMPLIANCE -- RFC2851 NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926.2.6 | IdentityosIpSla | IP SLA MIB. | ||
| 1.3.6.1.4.1.6926.2.6.0 | NodeosIpSlaNotifications | |||
| 1.3.6.1.4.1.6926.2.6.0.1 | NotificationosIpSlaBurstFailed | current | Generated when a burst failure is detected when the corresponding osIpSlaTrapGeneration object is set to burstFailed(1) subject to the value of osIpSlaTrapProb… | |
| 1.3.6.1.4.1.6926.2.6.0.2 | NotificationosIpSlaBurstCompleted | current | Generated at the completion of a osIpSla probe interval(burst). | |
| 1.3.6.1.4.1.6926.2.6.0.3 | NotificationosIpSlaTestFailed | current | Generated when a osIpSla test is determined to have failed when the corresponding osIpSlaTrapGeneration object is set to testFailed(3). | |
| 1.3.6.1.4.1.6926.2.6.0.4 | NotificationosIpSlaTestCompleted | current | Generated at the completion of a osIpSla test when the corresponding osIpSlaTrapGeneration object is set to testCompleted(3). | |
| 1.3.6.1.4.1.6926.2.6.0.5 | NotificationosIpSlaFdAlarm | current | Frame delay trap. | |
| 1.3.6.1.4.1.6926.2.6.0.6 | NotificationosIpSlaJittAlarm | current | Jitter trap. | |
| 1.3.6.1.4.1.6926.2.6.0.7 | NotificationosIpSlaPcktLossAlarm | current | Packet loss trap. | |
| 1.3.6.1.4.1.6926.2.6.1 | NodeosIpSlaCapabilities | |||
| 1.3.6.1.4.1.6926.2.6.1.1 | ScalarosIpSlaFeaturesSupport | read-only | current | Indicates features, that supported by this agent. Additionally this object serves as a SupportValue |
| 1.3.6.1.4.1.6926.2.6.2 | TableosIpSlaCtlTable | not-accessible | current | IpSla UNI per EVC (service) configuration table. |
| 1.3.6.1.4.1.6926.2.6.2.1 | RowosIpSlaCtlEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.6.2.1.1 | ColumnosIpSlaOwner | not-accessible | current | Owner name. |
| 1.3.6.1.4.1.6926.2.6.2.1.2 | ColumnosIpSlaTest | not-accessible | current | Test name. |
| 1.3.6.1.4.1.6926.2.6.2.1.3 | ColumnosIpSlaDescr | read-write | current | The purpose of this object is to provide a descriptive name of the remote test. |
| 1.3.6.1.4.1.6926.2.6.2.1.9 | ColumnosIpSlaProtocol | read-write | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.6.2.1.10 | ColumnosIpSlaTargetAddressType | read-write | current | Specifies the type of host address to be used at a remote host for performing an operation. |
| 1.3.6.1.4.1.6926.2.6.2.1.11 | ColumnosIpSlaTargetAddress | read-write | current | Specifies the host address to be used at a remote host for performing an operation. The host address type is determined by the object value of corresponding os… |
| 1.3.6.1.4.1.6926.2.6.2.1.16 | ColumnosIpSlaBurstNumber | read-write | current | Number of bursts. The value 0 means forever. |
| 1.3.6.1.4.1.6926.2.6.2.1.17 | ColumnosIpSlaBurstInterval | read-write | current | Time interval between bursts, in seconds. |
| 1.3.6.1.4.1.6926.2.6.2.1.21 | ColumnosIpSlaProbeNumber | read-write | current | Number of bursts. |
| 1.3.6.1.4.1.6926.2.6.2.1.22 | ColumnosIpSlaProbeInterval | read-write | current | Interval between packets. |
| 1.3.6.1.4.1.6926.2.6.2.1.23 | ColumnosIpSlaProbeTimeout | read-write | current | Specifies the duration to wait for a responce (milliseconds). |
| 1.3.6.1.4.1.6926.2.6.2.1.26 | ColumnosIpSlaPacketLength | read-write | current | Packet length, including VLAN ID and CRC. |
| 1.3.6.1.4.1.6926.2.6.2.1.27 | ColumnosIpSlaDataFill | read-write | current | Determine how to fill the data portion of a packet, while number of characters is a multiple of 8. |
| 1.3.6.1.4.1.6926.2.6.2.1.28 | ColumnosIpSlaDSField | read-write | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the packet. The DS Field is defined as the Type of … |
| 1.3.6.1.4.1.6926.2.6.2.1.29 | ColumnosIpSlaTtl | read-write | current | Time To Live. |
| 1.3.6.1.4.1.6926.2.6.2.1.30 | ColumnosIpSlaPriority | read-write | current | Priority number. |
| 1.3.6.1.4.1.6926.2.6.2.1.35 | ColumnosIpSlaFdRiseThold | read-write | current | Frame delay (Average of Round Trip Time) Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.6.2.1.36 | ColumnosIpSlaFdFallThold | read-write | current | Frame delay (Average of Round Trip Time) Falling threshold |
| 1.3.6.1.4.1.6926.2.6.2.1.63 | ColumnosIpSlaJittRiseThold | read-write | current | Jitter Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.6.2.1.64 | ColumnosIpSlaJittFallThold | read-write | current | Jitter Falling threshold. |
| 1.3.6.1.4.1.6926.2.6.2.1.68 | ColumnosIpSlaPcktLossRiseThold | read-write | current | The packet loss Rising threshold. |
| 1.3.6.1.4.1.6926.2.6.2.1.69 | ColumnosIpSlaPcktLossFallThold | read-write | current | The packet loss Falling threshold. |
| 1.3.6.1.4.1.6926.2.6.2.1.91 | ColumnosIpSlaHistoryMaxRows | read-write | current | The maximum number of entries allowed in the osIpSlaHistTable. An implementation of this MIB will remove the oldest entry in the osIpSlaHistTable to allow the … |
| 1.3.6.1.4.1.6926.2.6.2.1.92 | ColumnosIpSlaTrapGeneration | read-write | current | The value of this object determines when and if to generate a notification for this entry: burstFailed (1) - Generate a osIpSlaBurstFailed notification burstCo… |
| 1.3.6.1.4.1.6926.2.6.2.1.93 | ColumnosIpSlaRunMethod | read-write | current | The method of the test. |
| 1.3.6.1.4.1.6926.2.6.2.1.99 | ColumnosIpSlaRowStatus | read-write | current | This object allows entries to be created and deleted. Deletion of an entry in this table results in all corresponding tables being deleted. Activation of an op… |
| 1.3.6.1.4.1.6926.2.6.3 | TableosIpSlaResultsTable | not-accessible | current | Ethernet OAM Loopback last completed test results Table. |
| 1.3.6.1.4.1.6926.2.6.3.1 | RowosIpSlaResultsEntry | not-accessible | current | Contains results of Ethernet OAM Loopback test. |
| 1.3.6.1.4.1.6926.2.6.3.1.4 | ColumnosIpSlaResultsStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.6.3.1.5 | ColumnosIpSlaResultsRunMethod | read-only | current | The method, which was launched this test. |
| 1.3.6.1.4.1.6926.2.6.3.1.8 | ColumnosIpSlaResultsIpTargetAddrType | read-only | current | This objects indicates the type of address stored in the corresponding osIpSlaResultsIpTargetAddr object. |
| 1.3.6.1.4.1.6926.2.6.3.1.9 | ColumnosIpSlaResultsIpTargetAddr | read-only | current | This objects reports the IP address associated with a osIpSlaTargetAddress value when the destination address is specified as a DNS name. The value of this obj… |
| 1.3.6.1.4.1.6926.2.6.3.1.12 | ColumnosIpSlaResultsMsgTransmitted | read-only | current | Number of request packets transmitted. |
| 1.3.6.1.4.1.6926.2.6.3.1.13 | ColumnosIpSlaResultsMsgReceived | read-only | current | Number of reply packets received. |
| 1.3.6.1.4.1.6926.2.6.3.1.17 | ColumnosIpSlaResultsRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.6.3.1.18 | ColumnosIpSlaResultsRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.6.3.1.19 | ColumnosIpSlaResultsRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.6.3.1.20 | ColumnosIpSlaResultsRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.6.3.1.25 | ColumnosIpSlaResultsJittMin | read-only | current | The minimum value of all jitter values. |
| 1.3.6.1.4.1.6926.2.6.3.1.26 | ColumnosIpSlaResultsJittMax | read-only | current | The mahimum value of all jitter values. |
| 1.3.6.1.4.1.6926.2.6.3.1.27 | ColumnosIpSlaResultsJittAverage | read-only | current | The average value of all jitter values. |
| 1.3.6.1.4.1.6926.2.6.3.1.28 | ColumnosIpSlaResultsJittSum2 | read-only | current | This object contains the sum of the squares for all jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.6.3.1.30 | ColumnosIpSlaResultsTimedOut | read-only | current | Number of timed out packets. |
| 1.3.6.1.4.1.6926.2.6.3.1.31 | ColumnosIpSlaResultsWrongSequenced | read-only | current | Number of wrong sequenced packets. |
| 1.3.6.1.4.1.6926.2.6.3.1.32 | ColumnosIpSlaResultsRxErrors | read-only | current | Number of receive errors. |
| 1.3.6.1.4.1.6926.2.6.3.1.33 | ColumnosIpSlaResultsSendFailed | read-only | current | Number of send errors. |
| 1.3.6.1.4.1.6926.2.6.3.1.34 | ColumnosIpSlaResultsHistoryRows | read-only | current | Number of rows in history table. |
| 1.3.6.1.4.1.6926.2.6.3.1.35 | ColumnosIpSlaResultsPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.6.3.1.36 | ColumnosIpSlaResultsTos | read-only | current | Tos value. |
| 1.3.6.1.4.1.6926.2.6.3.1.37 | ColumnosIpSlaResultsPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.6.3.1.60 | ColumnosIpSlaResultsHistIndx | read-only | current | Corresponding osIpSlaHistoryIndex. |
| 1.3.6.1.4.1.6926.2.6.4 | TableosIpSlaHistoryTable | not-accessible | current | Ethernet OAM Loopback last completed test results Table. |
| 1.3.6.1.4.1.6926.2.6.4.1 | RowosIpSlaHistoryEntry | not-accessible | current | Contains results of Ethernet OAM Loopback test. |
| 1.3.6.1.4.1.6926.2.6.4.1.3 | ColumnosIpSlaHistoryIndex | not-accessible | current | An index that uniquely identifies the sample. This index starts at 1 and increases by one as each new sample is taken. |
| 1.3.6.1.4.1.6926.2.6.4.1.4 | ColumnosIpSlaHistoryStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.6.4.1.5 | ColumnosIpSlaHistoryRunMethod | read-only | current | The method, which was launched this test. |
| 1.3.6.1.4.1.6926.2.6.4.1.8 | ColumnosIpSlaHistoryIpTargetAddrType | read-only | current | This objects indicates the type of address stored in the corresponding osIpSlaHistoryIpTargetAddr object. |
| 1.3.6.1.4.1.6926.2.6.4.1.9 | ColumnosIpSlaHistoryIpTargetAddr | read-only | current | This objects reports the IP address associated with a osIpSlaTargetAddress value when the destination address is specified as a DNS name. The value of this obj… |
| 1.3.6.1.4.1.6926.2.6.4.1.12 | ColumnosIpSlaHistoryMsgTransmitted | read-only | current | Number of request packets transmitted. |
| 1.3.6.1.4.1.6926.2.6.4.1.13 | ColumnosIpSlaHistoryMsgReceived | read-only | current | Number of reply packets received. |
| 1.3.6.1.4.1.6926.2.6.4.1.17 | ColumnosIpSlaHistoryRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.6.4.1.18 | ColumnosIpSlaHistoryRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.6.4.1.19 | ColumnosIpSlaHistoryRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.6.4.1.20 | ColumnosIpSlaHistoryRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.6.4.1.25 | ColumnosIpSlaHistoryJittMin | read-only | current | The minimum value of all jitter values. |
| 1.3.6.1.4.1.6926.2.6.4.1.26 | ColumnosIpSlaHistoryJittMax | read-only | current | The mahimum value of all jitter values. |
| 1.3.6.1.4.1.6926.2.6.4.1.27 | ColumnosIpSlaHistoryJittAverage | read-only | current | The average value of all jitter values. |
| 1.3.6.1.4.1.6926.2.6.4.1.28 | ColumnosIpSlaHistoryJittSum2 | read-only | current | This object contains the sum of the squares for all jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.6.4.1.30 | ColumnosIpSlaHistoryTimedOut | read-only | current | Number of timed out packets. |
| 1.3.6.1.4.1.6926.2.6.4.1.31 | ColumnosIpSlaHistoryWrongSequenced | read-only | current | Number of wrong sequenced packets. |
| 1.3.6.1.4.1.6926.2.6.4.1.32 | ColumnosIpSlaHistoryRxErrors | read-only | current | Number of receive errors. |
| 1.3.6.1.4.1.6926.2.6.4.1.33 | ColumnosIpSlaHistorySendFailed | read-only | current | Number of send errors. |
| 1.3.6.1.4.1.6926.2.6.4.1.35 | ColumnosIpSlaHistoryPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.6.4.1.36 | ColumnosIpSlaHistoryTos | read-only | current | Tos value. |
| 1.3.6.1.4.1.6926.2.6.20 | TableosIpSlaTrapTable | not-accessible | current | Ip Sla trap table. |
| 1.3.6.1.4.1.6926.2.6.20.1 | RowosIpSlaTrapEntry | not-accessible | current | Contains configuration of Ip Sla traps. |
| 1.3.6.1.4.1.6926.2.6.20.1.30 | ColumnosIpSlaTrapReason | read-only | current | . |
| 1.3.6.1.4.1.6926.2.6.20.1.35 | ColumnosIpSlaTrapFdRiseThold | read-write | current | Frame delay (Average of Round Trip Time) Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.6.20.1.36 | ColumnosIpSlaTrapFdFallThold | read-write | current | Frame delay (Average of Round Trip Time) Falling threshold |
| 1.3.6.1.4.1.6926.2.6.20.1.63 | ColumnosIpSlaTrapJittRiseThold | read-write | current | Jitter Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.6.20.1.64 | ColumnosIpSlaTrapJittFallThold | read-write | current | Jitter Falling threshold. |
| 1.3.6.1.4.1.6926.2.6.20.1.68 | ColumnosIpSlaTrapPcktLossRiseThold | read-write | current | The packet loss Rising threshold. |
| 1.3.6.1.4.1.6926.2.6.20.1.69 | ColumnosIpSlaTrapPcktLossFallThold | read-write | current | The packet loss Falling threshold. |
| 1.3.6.1.4.1.6926.2.6.100 | NodeosIpSlaConformance | |||
| 1.3.6.1.4.1.6926.2.6.100.1 | NodeosIpSlaMIBCompliances | |||
| 1.3.6.1.4.1.6926.2.6.100.1.1 | ComplianceosIpSlaMIBCompliance | current | The core compliance statement for all the implementations. | |
| 1.3.6.1.4.1.6926.2.6.100.2 | NodeosIpSlaMIBGroups | |||
| 1.3.6.1.4.1.6926.2.6.100.2.1 | GrouposIpSlaMandatoryGroup | current | . | |
| 1.3.6.1.4.1.6926.2.6.100.2.2 | GrouposIpSlaNotificationsGroup | current | The notification which are required to be supported by implementations of this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TestRunMethod | INTEGER { unknown (1), slow(2), fast(3), none(4) } | current | Indicates the method of the test running: slow(2) fast(3) none(4) When the MEP operation is configured as slow(2) or fast(3), than the test is running now using this method. When the value is changed the test stops. If … |