OS-PWE3-ICCP-MIB
57 objects
MRV MIB for Redundancy support This MIB covers the support for ICCP and MCLACP as define by draft-ietf-pwe3-iccp
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2851 MacAddress DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926 | Nodeoaccess | |||
| 1.3.6.1.4.1.6926.2 | NodeoaOptiSwitch | |||
| 1.3.6.1.4.1.6926.2.29 | IdentityosPwe3Iccp | MRV MIB for Redundancy support This MIB covers the support for ICCP and MCLACP as define by draft-ietf-pwe3-iccp | ||
| 1.3.6.1.4.1.6926.2.29.0 | NodeosPwe3IccpNotifications | |||
| 1.3.6.1.4.1.6926.2.29.0.1 | NotificationosPwe3IccpRGUp | current | osPwe3IccpRGStatus becomes operational(5). | |
| 1.3.6.1.4.1.6926.2.29.0.2 | NotificationosPwe3IccpRGDown | current | osPwe3IccpRGStatus changed from operational(5) to any other state. | |
| 1.3.6.1.4.1.6926.2.29.0.3 | NotificationosPwe3IccpMlacpUp | current | osPwe3IccpMlacpStatus becomes operational(5). | |
| 1.3.6.1.4.1.6926.2.29.0.4 | NotificationosPwe3IccpMlacpDown | current | osPwe3IccpMlacpStatus changed from operational(5) to any other state. | |
| 1.3.6.1.4.1.6926.2.29.0.5 | NotificationosPwe3IccpMlacpAggChange | current | osPwe3IccpMlacpAggActiveRole changed. | |
| 1.3.6.1.4.1.6926.2.29.1 | NodeosPwe3IccpObjects | |||
| 1.3.6.1.4.1.6926.2.29.1.1 | NodeosPwe3IccpGen | |||
| 1.3.6.1.4.1.6926.2.29.1.1.1 | ScalarosPwe3IccpSupport | read-only | current | Indicates that this MIB is supported |
| 1.3.6.1.4.1.6926.2.29.1.2 | TableosPwe3IccpRGTable | not-accessible | current | Table of ICCP Redundancy Groups |
| 1.3.6.1.4.1.6926.2.29.1.2.1 | RowosPwe3IccpRGEntry | not-accessible | current | ICCP Redundancy Group Entry |
| 1.3.6.1.4.1.6926.2.29.1.2.1.1 | ColumnosPwe3IccpRGIndex | not-accessible | current | ICCP Redundancy Group Index (must be the same as define in the peer node) |
| 1.3.6.1.4.1.6926.2.29.1.2.1.2 | ColumnosPwe3IccpRGSenderName | read-write | current | The name of the node to be advertise by the ICCP protocol |
| 1.3.6.1.4.1.6926.2.29.1.2.1.3 | ColumnosPwe3IccpRGPeerAddrType | read-write | current | Peer node IP address type for establishment of RG |
| 1.3.6.1.4.1.6926.2.29.1.2.1.4 | ColumnosPwe3IccpRGPeerAddr | read-write | current | Peer node IP address for establishment of RG |
| 1.3.6.1.4.1.6926.2.29.1.2.1.5 | ColumnosPwe3IccpRGStatus | read-only | current | -NON EXISTENT: This state is the starting point for the state machine.It indicates that no ICCP connection exists and that there's no LDP session established b… |
| 1.3.6.1.4.1.6926.2.29.1.2.1.6 | ColumnosPwe3IccpRGBfdRef | read-write | current | Reference index to BFD session monitoring the connectivity with the peer node. CLI command : liveliness bfd |
| 1.3.6.1.4.1.6926.2.29.1.2.1.89 | ColumnosPwe3IccpRGLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.29.1.2.1.90 | ColumnosPwe3IccpRGRowStatus | read-write | current | Description. |
| 1.3.6.1.4.1.6926.2.29.1.3 | TableosPwe3IccpMlacpAppTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6926.2.29.1.3.1 | RowosPwe3IccpMlacpAppEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6926.2.29.1.3.1.1 | ColumnosPwe3IccpMlacpIndex | not-accessible | current | Index of the mlacp application instance, must be equal to the ICCP RG index (osPwe3IccpRGIndex) to be used. |
| 1.3.6.1.4.1.6926.2.29.1.3.1.2 | ColumnosPwe3IccpMlacpChassisId | read-write | current | Chassis ID to be published by LACP of the trunk conencted to the mlacp |
| 1.3.6.1.4.1.6926.2.29.1.3.1.3 | ColumnosPwe3IccpMlacpSystemMac | read-write | current | Assigns the common System MAC to be used for MC-LAG |
| 1.3.6.1.4.1.6926.2.29.1.3.1.4 | ColumnosPwe3IccpMlacpSystemPriority | read-write | current | Assigns the system Priority as defined by LACP |
| 1.3.6.1.4.1.6926.2.29.1.3.1.5 | ColumnosPwe3IccpMlacpLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.29.1.3.1.6 | ColumnosPwe3IccpMlacpStatus | read-only | current | mlacp session status |
| 1.3.6.1.4.1.6926.2.29.1.3.1.7 | ColumnosPwe3IccpMlacpRowStatus | read-write | current | Description. |
| 1.3.6.1.4.1.6926.2.29.1.4 | TableosPwe3IccpMlacpAggTable | not-accessible | current | Table of mlacp aggregators |
| 1.3.6.1.4.1.6926.2.29.1.4.1 | RowosPwe3IccpMlacpAggEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6926.2.29.1.4.1.1 | ColumnosPwe3IccpMlacpAggIndex | not-accessible | current | mlacp Aggregator ID - must be the same index as the trunk index (osPortTrunkId) defined in osPortTrunkTable |
| 1.3.6.1.4.1.6926.2.29.1.4.1.2 | ColumnosPwe3IccpMlacpAggIccpIndex | read-write | current | ICCP RG index - osPwe3IccpRGIndex |
| 1.3.6.1.4.1.6926.2.29.1.4.1.3 | ColumnosPwe3IccpMlacpAggMode | read-write | current | mlacp mode as either active-standby or active-active first release does not support active-active |
| 1.3.6.1.4.1.6926.2.29.1.4.1.4 | ColumnosPwe3IccpMlacpAggRole | read-write | current | Define the node default mode as either active or standby |
| 1.3.6.1.4.1.6926.2.29.1.4.1.5 | ColumnosPwe3IccpMlacpAggActiveRole | read-only | current | Retrieve the node current mode as either active or standby |
| 1.3.6.1.4.1.6926.2.29.1.4.1.6 | ColumnosPwe3IccpMlacpAggRevertive | read-write | current | Enables revertive switchover and configures the holdoff timer -1 - Non Revertive 0-3600 - Revertive, time in seconds |
| 1.3.6.1.4.1.6926.2.29.1.4.1.7 | ColumnosPwe3IccpMlacpAggThreshold | read-write | current | Define the prectage of links in the trunk to initiate a failover: i.e. if the trunk has 4 links and the value is set to 50, only when more than 2 links will fa… |
| 1.3.6.1.4.1.6926.2.29.1.4.1.8 | ColumnosPwe3IccpMlacpAggCommand | read-write | current | This object manual controls the behavior of the aggergator, The command will be accepted only when mlacp-aggr is configured as osPwe3IccpMlacpAggRole active(1)… |
| 1.3.6.1.4.1.6926.2.29.1.4.1.9 | ColumnosPwe3IccpMlacpAggSwCause | read-only | current | The cause of the last switchower. |
| 1.3.6.1.4.1.6926.2.29.1.4.1.89 | ColumnosPwe3IccpMlacpAggLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.29.1.4.1.90 | ColumnosPwe3IccpMlacpAggRowStatus | read-write | current | Description. |
| 1.3.6.1.4.1.6926.2.29.2 | NodeosPwe3IccpConf | |||
| 1.3.6.1.4.1.6926.2.29.2.1 | NodeosPwe3IccpGroups | |||
| 1.3.6.1.4.1.6926.2.29.2.1.1 | GrouposPwe3IccpNotificationGroup | current | Description. | |
| 1.3.6.1.4.1.6926.2.29.2.1.2 | GrouposPwe3IccpGenGroup | current | Description. | |
| 1.3.6.1.4.1.6926.2.29.2.1.3 | GrouposPwe3IccpRGGroup | current | 1st revision of MRV Redundancy MIB | |
| 1.3.6.1.4.1.6926.2.29.2.1.4 | GrouposPwe3IccpMlacpAggGroup | current | Description. | |
| 1.3.6.1.4.1.6926.2.29.2.1.5 | GrouposPwe3IccpMlacpAppGroup | current | Description. | |
| 1.3.6.1.4.1.6926.2.29.2.2 | NodeosPwe3IccpCompliances | |||
| 1.3.6.1.4.1.6926.2.29.2.2.1 | ComplianceosPwe3IccpModuleCompliance | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdminState | INTEGER { up(1), down(2) } | current | Description. |
| BfdStatus | INTEGER { disable(0), enable(1) } | current | Description. |
| IccpStatus | INTEGER { nonExistent(0), initialized(1), capSent(2), capRecv(3), connecting(4), operational(5) } | current | -NON EXISTENT: This state is the starting point for the state machine.It indicates that no ICCP connection exists and that there's no LDP session established between the PEs. -INITIALIZED: This state indicates that an L… |
| MlacpStatus | INTEGER { nonExistent(0), reset(1), connSent(2), connRecv(3), connecting(4), operational(5) } | current | -NON EXISTENT: This state indicates that the Application Connection does not exist since there is no ICCP connection between the PEs. -RESET: This state indicates that an ICCP connection is operational between the PEs, … |