MIB Viewer

OS-SYNCE-MIB

38 objects
MRV Configuration of The MIB module for PTP version 2 (IEEE Std. 1588(TM)-2008)
Imported Objects
OS-COMMON-TC-MIBoaOptiSwitch
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIenterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.6926.2.23IdentityosSyncEMIBMRV Configuration of The MIB module for PTP version 2 (IEEE Std. 1588(TM)-2008)
1.3.6.1.4.1.6926.2.23.0NodeosSyncEMIBNotifs
1.3.6.1.4.1.6926.2.23.0.1NotificationosSyncEClockAlarmLockcurrentNetwork Clock Lock (synchronization) alarm to specific source; osSyncEClockSourceEntryType is the part of osSyncEClockSourceEntry (osSyncEClockSourceTable) osS…
1.3.6.1.4.1.6926.2.23.0.2NotificationosSyncEClockAlarmUnLockcurrentNetwork Clock UnLock (de-synchronisation) alarm to specific source; osSyncEClockSourceEntryType is the part of osSyncEClockSourceEntry (osSyncEClockSourceTable…
1.3.6.1.4.1.6926.2.23.0.3NotificationosSyncEPtpAlarmLockcurrentPTP (1588) state is Lock.
1.3.6.1.4.1.6926.2.23.0.4NotificationosSyncEPtpAlarmUnLockcurrentPTP (1588) state is UnLock.
1.3.6.1.4.1.6926.2.23.1NodeosSyncEMIBObjects
1.3.6.1.4.1.6926.2.23.1.1NodeosSyncEMIBInfo
1.3.6.1.4.1.6926.2.23.1.1.1NodeosSyncEMIBEventParams
1.3.6.1.4.1.6926.2.23.1.1.1.1ScalarosSyncEEventDescriptionread-onlycurrentSyncE Event Description. Default description : 'Alarm: <alarm itself>'
1.3.6.1.4.1.6926.2.23.1.2NodeosSyncEMIBCfg
1.3.6.1.4.1.6926.2.23.1.2.1NodeosSyncEMIBCapabilities
1.3.6.1.4.1.6926.2.23.1.2.1.1ScalarosSyncEMIBSupportread-onlycurrentThe value supported(2) indicates that the device supports network clocks.
1.3.6.1.4.1.6926.2.23.1.2.2NodeosSyncEMIBCfgGen
1.3.6.1.4.1.6926.2.23.1.2.2.1ScalarosSyncEStatusread-writecurrentEnable SyncE protocol.
1.3.6.1.4.1.6926.2.23.1.2.2.2ScalarosSyncET1CableTyperead-writecurrentosSyncET1CableType applies both to a ds1 port configured with a short buildout (1-6) and for long buildout (7-9). Short buildout is bescribed bythe length of t…
1.3.6.1.4.1.6926.2.23.1.2.2.3ScalarosSyncEDs1e1Typeread-writecurrentthe value of osSyncEDs1e1Type indicates whether the DS1e1 signal is in T1, E1 or J1 mode. in addition, a square signal of 1544 or 2048 (that can be derived fro…
1.3.6.1.4.1.6926.2.23.1.2.2.4ScalarosSyncEDs1e1Connectread-writecurrentsec: Connectivity to SDH Equipment Clock ssu: Connectivity to Synchronization Supply Unit
1.3.6.1.4.1.6926.2.23.1.2.2.5ScalarosSyncEFrequencyClkInread-writecurrentfrequency of the BNC input signal ClkIn.
1.3.6.1.4.1.6926.2.23.1.2.2.6ScalarosSyncEFrequencyClkOutread-writecurrentfrequency of the BNC output signal ClkOut ptp: connect the ptpOut signal to the clkOut BNC
1.3.6.1.4.1.6926.2.23.1.2.2.7ScalarosSyncEFrequencyPtpread-writecurrentfrequency of the BNC input signal ClkIn
1.3.6.1.4.1.6926.2.23.1.2.2.8ScalarosSyncELineCoderead-writecurrentThis variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. It should be set to match…
1.3.6.1.4.1.6926.2.23.1.2.2.9ScalarosSyncEFreeRunModeread-writecurrentFree-run mode is one that has not beem syncronized to a clock source. eec: EEC1 or EEC2 quality level as defined by ITU-T G.781 dnu: Do not use me (quality lev…
1.3.6.1.4.1.6926.2.23.1.2.3TableosSyncEClockSourceTablenot-accessiblecurrentThe table of clock sources for SyncE
1.3.6.1.4.1.6926.2.23.1.2.3.1RowosSyncEClockSourceEntrynot-accessiblecurrentAn entry in the table contains a SyncE clock source.
1.3.6.1.4.1.6926.2.23.1.2.3.1.1ColumnosSyncEClockSourceEntryIdnot-accessiblecurrent.
1.3.6.1.4.1.6926.2.23.1.2.3.1.2ColumnosSyncEClockSourceEntryTyperead-onlycurrentclock source entry type.
1.3.6.1.4.1.6926.2.23.1.2.3.1.3ColumnosSyncEClockSourceEthPortNumread-onlycurrentPort of the entry. 0 value indicates invalid entry.
1.3.6.1.4.1.6926.2.23.1.2.3.1.4ColumnosSyncEClockSourceEthPriorityread-writecurrentport priority to be selected from the range 0 to 126 0: do not use 1: highest priority 127: lowest priority (default)
1.3.6.1.4.1.6926.2.23.1.2.3.1.5ColumnosSyncEClockSourceE1QLread-writecurrentIndicates the QL of the clock source assuming it is E1.
1.3.6.1.4.1.6926.2.23.1.2.3.1.6ColumnosSyncEClockSourceT1QLread-writecurrentIndicates the QL of the clock source assuming it is T1.
1.3.6.1.4.1.6926.2.23.1.2.3.1.7ColumnosSyncEClockSourceJ1QLread-writecurrentIndicates the QL of the clock source assuming it is j1.
1.3.6.1.4.1.6926.2.23.101NodeosSyncEMIBConformance
1.3.6.1.4.1.6926.2.23.101.1NodeosSyncEMIBCompliances
1.3.6.1.4.1.6926.2.23.101.1.1ComplianceosSyncEMIBCompliancecurrentThe core compliance statement for all the implementations.
1.3.6.1.4.1.6926.2.23.101.2NodeosSyncEMIBGroups
1.3.6.1.4.1.6926.2.23.101.2.1GrouposSyncEMibMandatoryGroupcurrent.
1.3.6.1.4.1.6926.2.23.101.2.2GrouposSyncEMIBNotificationsGroupcurrentObjects for the Notifications group.