OSPF-MIB
257 objects
The MIB module to describe the OSPF Version 2 Protocol. Note that some objects in this MIB module may pose a significant security risk. Refer to the Security Considerations section in RFC 4750 for more information. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of RFC 4750; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.14 | Identityospf | The MIB module to describe the OSPF Version 2 Protocol. Note that some objects in this MIB module may pose a significant security risk. Refer to the Security C… | ||
| 1.3.6.1.2.1.14.1 | NodeospfGeneralGroup | |||
| 1.3.6.1.2.1.14.1.1 | ScalarospfRouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.2.1.14.1.2 | ScalarospfAdminStat | read-write | current | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.2.1.14.1.3 | ScalarospfVersionNumber | read-only | current | The current version number of the OSPF protocol is 2. |
| 1.3.6.1.2.1.14.1.4 | ScalarospfAreaBdrRtrStatus | read-only | current | A flag to note whether this router is an Area Border Router. |
| 1.3.6.1.2.1.14.1.5 | ScalarospfASBdrRtrStatus | read-write | current | A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the c… |
| 1.3.6.1.2.1.14.1.6 | ScalarospfExternLsaCount | read-only | current | The number of external (LS type-5) link state advertisements in the link state database. |
| 1.3.6.1.2.1.14.1.7 | ScalarospfExternLsaCksumSum | read-only | current | The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there h… |
| 1.3.6.1.2.1.14.1.8 | ScalarospfTOSSupport | read-write | current | The router's support for type-of-service routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.2.1.14.1.9 | ScalarospfOriginateNewLsas | read-only | current | The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in… |
| 1.3.6.1.2.1.14.1.10 | ScalarospfRxNewLsas | read-only | current | The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-origin… |
| 1.3.6.1.2.1.14.1.11 | ScalarospfExtLsdbLimit | read-write | current | The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the … |
| 1.3.6.1.2.1.14.1.12 | ScalarospfMulticastExtensions | read-write | current | A bit mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the multicast extensions to OSPF. Bi… |
| 1.3.6.1.2.1.14.1.13 | ScalarospfExitOverflowInterval | read-write | current | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.2.1.14.1.14 | ScalarospfDemandExtensions | read-write | current | The router's support for demand routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.2.1.14.1.15 | ScalarospfRFC1583Compatibility | read-write | current | Indicates metrics used to choose among multiple AS-external LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multi… |
| 1.3.6.1.2.1.14.1.16 | ScalarospfOpaqueLsaSupport | read-only | current | The router's support for Opaque LSA types. |
| 1.3.6.1.2.1.14.1.17 | ScalarospfReferenceBandwidth | read-write | current | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent and w… |
| 1.3.6.1.2.1.14.1.18 | ScalarospfRestartSupport | read-write | current | The router's support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object… |
| 1.3.6.1.2.1.14.1.19 | ScalarospfRestartInterval | read-write | current | Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.2.1.14.1.20 | ScalarospfRestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.2.1.14.1.21 | ScalarospfRestartStatus | read-only | current | Current status of OSPF graceful restart. |
| 1.3.6.1.2.1.14.1.22 | ScalarospfRestartAge | read-only | current | Remaining time in current OSPF graceful restart interval. |
| 1.3.6.1.2.1.14.1.23 | ScalarospfRestartExitReason | read-only | current | Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a res… |
| 1.3.6.1.2.1.14.1.24 | ScalarospfAsLsaCount | read-only | current | The number of AS-scope link state advertisements in the AS-scope link state database. |
| 1.3.6.1.2.1.14.1.25 | ScalarospfAsLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determin… |
| 1.3.6.1.2.1.14.1.26 | ScalarospfStubRouterSupport | read-only | current | The router's support for stub router functionality. |
| 1.3.6.1.2.1.14.1.27 | ScalarospfStubRouterAdvertisement | read-write | current | This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA an… |
| 1.3.6.1.2.1.14.1.28 | ScalarospfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred s… |
| 1.3.6.1.2.1.14.2 | TableospfAreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as p… |
| 1.3.6.1.2.1.14.2.1 | RowospfAreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The interfaces and virtual links are configur… |
| 1.3.6.1.2.1.14.2.1.1 | ColumnospfAreaId | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.2.1.2 | ColumnospfAuthType | read-create | obsolete | The authentication type specified for an area. |
| 1.3.6.1.2.1.14.2.1.3 | ColumnospfImportAsExtern | read-create | current | Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs i… |
| 1.3.6.1.2.1.14.2.1.4 | ColumnospfSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.2.1.14.2.1.5 | ColumnospfAreaBdrRtrCount | read-only | current | The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass. |
| 1.3.6.1.2.1.14.2.1.6 | ColumnospfAsBdrRtrCount | read-only | current | The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass. |
| 1.3.6.1.2.1.14.2.1.7 | ColumnospfAreaLsaCount | read-only | current | The total number of link state advertisements in this area's link state database, excluding AS-external LSAs. |
| 1.3.6.1.2.1.14.2.1.8 | ColumnospfAreaLsaCksumSum | read-only | current | The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state a… |
| 1.3.6.1.2.1.14.2.1.9 | ColumnospfAreaSummary | read-create | current | The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router … |
| 1.3.6.1.2.1.14.2.1.10 | ColumnospfAreaStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.2.1.11 | ColumnospfAreaNssaTranslatorRole | read-create | current | Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| 1.3.6.1.2.1.14.2.1.12 | ColumnospfAreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border … |
| 1.3.6.1.2.1.14.2.1.13 | ColumnospfAreaNssaTranslatorStabilityInterval | read-create | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.2.1.14.2.1.14 | ColumnospfAreaNssaTranslatorEvents | read-only | current | Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initia… |
| 1.3.6.1.2.1.14.3 | TableospfStubAreaTable | not-accessible | current | The set of metrics that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.2.1.14.3.1 | RowospfStubAreaEntry | not-accessible | current | The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and wh… |
| 1.3.6.1.2.1.14.3.1.1 | ColumnospfStubAreaId | read-only | current | The 32-bit identifier for the stub area. On creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.3.1.2 | ColumnospfStubTOS | read-only | current | The Type of Service associated with the metric. On creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.3.1.3 | ColumnospfStubMetric | read-create | current | The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas. |
| 1.3.6.1.2.1.14.3.1.4 | ColumnospfStubStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.3.1.5 | ColumnospfStubMetricType | read-create | current | This variable displays the type of metric advertised as a default route. |
| 1.3.6.1.2.1.14.4 | TableospfLsdbTable | not-accessible | current | The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to. |
| 1.3.6.1.2.1.14.4.1 | RowospfLsdbEntry | not-accessible | current | A single link state advertisement. |
| 1.3.6.1.2.1.14.4.1.1 | ColumnospfLsdbAreaId | read-only | current | The 32-bit identifier of the area from which the LSA was received. |
| 1.3.6.1.2.1.14.4.1.2 | ColumnospfLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for … |
| 1.3.6.1.2.1.14.4.1.3 | ColumnospfLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.2.1.14.4.1.4 | ColumnospfLsdbRouterId | read-only | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.4.1.5 | ColumnospfLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.2.1.14.4.1.6 | ColumnospfLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.4.1.7 | ColumnospfLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.4.1.8 | ColumnospfLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. |
| 1.3.6.1.2.1.14.5 | TableospfAreaRangeTable | not-accessible | obsolete | The Address Range Table acts as an adjunct to the Area Table. It describes those Address Range Summaries that are configured to be propagated from an Area to r… |
| 1.3.6.1.2.1.14.5.1 | RowospfAreaRangeEntry | not-accessible | obsolete | A single area address range. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.2.1.14.5.1.1 | ColumnospfAreaRangeAreaId | read-only | obsolete | The area that the address range is to be found within. |
| 1.3.6.1.2.1.14.5.1.2 | ColumnospfAreaRangeNet | read-only | obsolete | The IP address of the net or subnet indicated by the range. |
| 1.3.6.1.2.1.14.5.1.3 | ColumnospfAreaRangeMask | read-create | obsolete | The subnet mask that pertains to the net or subnet. |
| 1.3.6.1.2.1.14.5.1.4 | ColumnospfAreaRangeStatus | read-create | obsolete | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.5.1.5 | ColumnospfAreaRangeEffect | read-create | obsolete | Subnets subsumed by ranges either trigger the advertisement of the indicated summary (advertiseMatching) or result in the subnet's not being advertised at all … |
| 1.3.6.1.2.1.14.6 | TableospfHostTable | not-accessible | current | The Host/Metric Table indicates what hosts are directly attached to the router, what metrics and types of service should be advertised for them, and what areas… |
| 1.3.6.1.2.1.14.6.1 | RowospfHostEntry | not-accessible | current | A metric to be advertised, for a given type of service, when a given host is reachable. Information in this table is persistent and when this object is written… |
| 1.3.6.1.2.1.14.6.1.1 | ColumnospfHostIpAddress | read-only | current | The IP address of the host. |
| 1.3.6.1.2.1.14.6.1.2 | ColumnospfHostTOS | read-only | current | The Type of Service of the route being configured. |
| 1.3.6.1.2.1.14.6.1.3 | ColumnospfHostMetric | read-create | current | The metric to be advertised. |
| 1.3.6.1.2.1.14.6.1.4 | ColumnospfHostStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.6.1.5 | ColumnospfHostAreaID | read-only | deprecated | The OSPF area to which the host belongs. Deprecated by ospfHostCfgAreaID. |
| 1.3.6.1.2.1.14.6.1.6 | ColumnospfHostCfgAreaID | read-create | current | To configure the OSPF area to which the host belongs. |
| 1.3.6.1.2.1.14.7 | TableospfIfTable | not-accessible | current | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. It augments the ipAddrTable with OSPF specific information. |
| 1.3.6.1.2.1.14.7.1 | RowospfIfEntry | not-accessible | current | The OSPF interface entry describes one interface from the viewpoint of OSPF. Information in this table is persistent and when this object is written the entity… |
| 1.3.6.1.2.1.14.7.1.1 | ColumnospfIfIpAddress | read-only | current | The IP address of this OSPF interface. |
| 1.3.6.1.2.1.14.7.1.2 | ColumnospfAddressLessIf | read-only | current | For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corre… |
| 1.3.6.1.2.1.14.7.1.3 | ColumnospfIfAreaId | read-create | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.7.1.4 | ColumnospfIfType | read-create | current | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.… |
| 1.3.6.1.2.1.14.7.1.5 | ColumnospfIfAdminStat | read-create | current | The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The valu… |
| 1.3.6.1.2.1.14.7.1.6 | ColumnospfIfRtrPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.2.1.14.7.1.7 | ColumnospfIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second. |
| 1.3.6.1.2.1.14.7.1.8 | ColumnospfIfRetransInterval | read-create | current | The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.2.1.14.7.1.9 | ColumnospfIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.2.1.14.7.1.10 | ColumnospfIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.2.1.14.7.1.11 | ColumnospfIfPollInterval | read-create | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. |
| 1.3.6.1.2.1.14.7.1.12 | ColumnospfIfState | read-only | current | The OSPF Interface State. |
| 1.3.6.1.2.1.14.7.1.13 | ColumnospfIfDesignatedRouter | read-only | current | The IP address of the designated router. |
| 1.3.6.1.2.1.14.7.1.14 | ColumnospfIfBackupDesignatedRouter | read-only | current | The IP address of the backup designated router. |
| 1.3.6.1.2.1.14.7.1.15 | ColumnospfIfEvents | read-only | current | The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.2.1.14.7.1.16 | ColumnospfIfAuthKey | read-create | current | The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5… |
| 1.3.6.1.2.1.14.7.1.17 | ColumnospfIfStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.7.1.18 | ColumnospfIfMulticastForwarding | read-create | current | The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multi… |
| 1.3.6.1.2.1.14.7.1.19 | ColumnospfIfDemand | read-create | current | Indicates whether Demand OSPF procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this int… |
| 1.3.6.1.2.1.14.7.1.20 | ColumnospfIfAuthType | read-create | current | The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router. |
| 1.3.6.1.2.1.14.7.1.21 | ColumnospfIfLsaCount | read-only | current | The total number of link-local link state advertisements in this interface's link-local link state database. |
| 1.3.6.1.2.1.14.7.1.22 | ColumnospfIfLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to det… |
| 1.3.6.1.2.1.14.7.1.23 | ColumnospfIfDesignatedRouterId | read-only | current | The Router ID of the designated router. |
| 1.3.6.1.2.1.14.7.1.24 | ColumnospfIfBackupDesignatedRouterId | read-only | current | The Router ID of the backup designated router. |
| 1.3.6.1.2.1.14.8 | TableospfIfMetricTable | not-accessible | current | The Metric Table describes the metrics to be advertised for a specified interface at the various types of service. As such, this table is an adjunct of the OSP… |
| 1.3.6.1.2.1.14.8.1 | RowospfIfMetricEntry | not-accessible | current | A particular TOS metric for a non-virtual interface identified by the interface index. Information in this table is persistent and when this object is written … |
| 1.3.6.1.2.1.14.8.1.1 | ColumnospfIfMetricIpAddress | read-only | current | The IP address of this OSPF interface. On row creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.8.1.2 | ColumnospfIfMetricAddressLessIf | read-only | current | For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the value… |
| 1.3.6.1.2.1.14.8.1.3 | ColumnospfIfMetricTOS | read-only | current | The Type of Service metric being referenced. On row creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.8.1.4 | ColumnospfIfMetricValue | read-create | current | The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed. |
| 1.3.6.1.2.1.14.8.1.5 | ColumnospfIfMetricStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.9 | TableospfVirtIfTable | not-accessible | current | Information about this router's virtual interfaces that the OSPF Process is configured to carry on. |
| 1.3.6.1.2.1.14.9.1 | RowospfVirtIfEntry | not-accessible | current | Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-… |
| 1.3.6.1.2.1.14.9.1.1 | ColumnospfVirtIfAreaId | read-only | current | The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. |
| 1.3.6.1.2.1.14.9.1.2 | ColumnospfVirtIfNeighbor | read-only | current | The Router ID of the virtual neighbor. |
| 1.3.6.1.2.1.14.9.1.3 | ColumnospfVirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second. |
| 1.3.6.1.2.1.14.9.1.4 | ColumnospfVirtIfRetransInterval | read-create | current | The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting… |
| 1.3.6.1.2.1.14.9.1.5 | ColumnospfVirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.2.1.14.9.1.6 | ColumnospfVirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.2.1.14.9.1.7 | ColumnospfVirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.2.1.14.9.1.8 | ColumnospfVirtIfEvents | read-only | current | The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management… |
| 1.3.6.1.2.1.14.9.1.9 | ColumnospfVirtIfAuthKey | read-create | current | The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5… |
| 1.3.6.1.2.1.14.9.1.10 | ColumnospfVirtIfStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.9.1.11 | ColumnospfVirtIfAuthType | read-create | current | The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router. |
| 1.3.6.1.2.1.14.9.1.12 | ColumnospfVirtIfLsaCount | read-only | current | The total number of link-local link state advertisements in this virtual interface's link-local link state database. |
| 1.3.6.1.2.1.14.9.1.13 | ColumnospfVirtIfLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be use… |
| 1.3.6.1.2.1.14.10 | TableospfNbrTable | not-accessible | current | A table describing all non-virtual neighbors in the locality of the OSPF router. |
| 1.3.6.1.2.1.14.10.1 | RowospfNbrEntry | not-accessible | current | The information regarding a single neighbor. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-v… |
| 1.3.6.1.2.1.14.10.1.1 | ColumnospfNbrIpAddr | read-only | current | The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the nei… |
| 1.3.6.1.2.1.14.10.1.2 | ColumnospfNbrAddressLessIndex | read-only | current | On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.2.1.14.10.1.3 | ColumnospfNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.2.1.14.10.1.4 | ColumnospfNbrOptions | read-only | current | A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.2.1.14.10.1.5 | ColumnospfNbrPriority | read-create | current | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated rou… |
| 1.3.6.1.2.1.14.10.1.6 | ColumnospfNbrState | read-only | current | The state of the relationship with this neighbor. |
| 1.3.6.1.2.1.14.10.1.7 | ColumnospfNbrEvents | read-only | current | The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.2.1.14.10.1.8 | ColumnospfNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.2.1.14.10.1.9 | ColumnospfNbmaNbrStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.10.1.10 | ColumnospfNbmaNbrPermanence | read-only | current | This variable displays the status of the entry; 'dynamic' and 'permanent' refer to how the neighbor became known. |
| 1.3.6.1.2.1.14.10.1.11 | ColumnospfNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor. |
| 1.3.6.1.2.1.14.10.1.12 | ColumnospfNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.2.1.14.10.1.13 | ColumnospfNbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.2.1.14.10.1.14 | ColumnospfNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.2.1.14.11 | TableospfVirtNbrTable | not-accessible | current | This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only. |
| 1.3.6.1.2.1.14.11.1 | RowospfVirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.2.1.14.11.1.1 | ColumnospfVirtNbrArea | read-only | current | The Transit Area Identifier. |
| 1.3.6.1.2.1.14.11.1.2 | ColumnospfVirtNbrRtrId | read-only | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.2.1.14.11.1.3 | ColumnospfVirtNbrIpAddr | read-only | current | The IP address this virtual neighbor is using. |
| 1.3.6.1.2.1.14.11.1.4 | ColumnospfVirtNbrOptions | read-only | current | A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If… |
| 1.3.6.1.2.1.14.11.1.5 | ColumnospfVirtNbrState | read-only | current | The state of the virtual neighbor relationship. |
| 1.3.6.1.2.1.14.11.1.6 | ColumnospfVirtNbrEvents | read-only | current | The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializati… |
| 1.3.6.1.2.1.14.11.1.7 | ColumnospfVirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.2.1.14.11.1.8 | ColumnospfVirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor. |
| 1.3.6.1.2.1.14.11.1.9 | ColumnospfVirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.2.1.14.11.1.10 | ColumnospfVirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.2.1.14.11.1.11 | ColumnospfVirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.2.1.14.12 | TableospfExtLsdbTable | not-accessible | deprecated | The OSPF Process's external LSA link state database. This table is identical to the OSPF LSDB Table in format, but contains only external link state advertisem… |
| 1.3.6.1.2.1.14.12.1 | RowospfExtLsdbEntry | not-accessible | deprecated | A single link state advertisement. |
| 1.3.6.1.2.1.14.12.1.1 | ColumnospfExtLsdbType | read-only | deprecated | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.2.1.14.12.1.2 | ColumnospfExtLsdbLsid | read-only | deprecated | The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.2.1.14.12.1.3 | ColumnospfExtLsdbRouterId | read-only | deprecated | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.12.1.4 | ColumnospfExtLsdbSequence | read-only | deprecated | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.2.1.14.12.1.5 | ColumnospfExtLsdbAge | read-only | deprecated | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.12.1.6 | ColumnospfExtLsdbChecksum | read-only | deprecated | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.12.1.7 | ColumnospfExtLsdbAdvertisement | read-only | deprecated | The entire link state advertisement, including its header. |
| 1.3.6.1.2.1.14.13 | NodeospfRouteGroup | |||
| 1.3.6.1.2.1.14.13.1 | NodeospfIntraArea | |||
| 1.3.6.1.2.1.14.13.2 | NodeospfInterArea | |||
| 1.3.6.1.2.1.14.13.3 | NodeospfExternalType1 | |||
| 1.3.6.1.2.1.14.13.4 | NodeospfExternalType2 | |||
| 1.3.6.1.2.1.14.14 | TableospfAreaAggregateTable | not-accessible | current | The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its pur… |
| 1.3.6.1.2.1.14.14.1 | RowospfAreaAggregateEntry | not-accessible | current | A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storag… |
| 1.3.6.1.2.1.14.14.1.1 | ColumnospfAreaAggregateAreaID | read-only | current | The area within which the address aggregate is to be found. |
| 1.3.6.1.2.1.14.14.1.2 | ColumnospfAreaAggregateLsdbType | read-only | current | The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to. |
| 1.3.6.1.2.1.14.14.1.3 | ColumnospfAreaAggregateNet | read-only | current | The IP address of the net or subnet indicated by the range. |
| 1.3.6.1.2.1.14.14.1.4 | ColumnospfAreaAggregateMask | read-only | current | The subnet mask that pertains to the net or subnet. |
| 1.3.6.1.2.1.14.14.1.5 | ColumnospfAreaAggregateStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.2.1.14.14.1.6 | ColumnospfAreaAggregateEffect | read-create | current | Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at al… |
| 1.3.6.1.2.1.14.14.1.7 | ColumnospfAreaAggregateExtRouteTag | read-create | current | External route tag to be included in NSSA (type-7) LSAs. |
| 1.3.6.1.2.1.14.15 | NodeospfConformance | |||
| 1.3.6.1.2.1.14.15.1 | NodeospfGroups | |||
| 1.3.6.1.2.1.14.15.1.1 | GroupospfBasicGroup | deprecated | These objects are used to monitor/manage global OSPF parameters. This object group conforms to RFC 1850. | |
| 1.3.6.1.2.1.14.15.1.2 | GroupospfAreaGroup | deprecated | These objects are used for OSPF systems supporting areas per RFC 1850. | |
| 1.3.6.1.2.1.14.15.1.3 | GroupospfStubAreaGroup | current | These objects are used for OSPF systems supporting stub areas. | |
| 1.3.6.1.2.1.14.15.1.4 | GroupospfLsdbGroup | current | These objects are used for OSPF systems that display their link state database. | |
| 1.3.6.1.2.1.14.15.1.5 | GroupospfAreaRangeGroup | obsolete | These objects are used for non-CIDR OSPF systems that support multiple areas. This object group is obsolete. | |
| 1.3.6.1.2.1.14.15.1.6 | GroupospfHostGroup | deprecated | These objects are used for OSPF systems that support attached hosts. | |
| 1.3.6.1.2.1.14.15.1.7 | GroupospfIfGroup | deprecated | These objects are used to monitor/manage OSPF interfaces. This object group conforms to RFC 1850. | |
| 1.3.6.1.2.1.14.15.1.8 | GroupospfIfMetricGroup | current | These objects are used for OSPF systems for supporting interface metrics. | |
| 1.3.6.1.2.1.14.15.1.9 | GroupospfVirtIfGroup | deprecated | These objects are used for OSPF systems for supporting virtual interfaces. This object group conforms to RFC 1850. | |
| 1.3.6.1.2.1.14.15.1.10 | GroupospfNbrGroup | deprecated | These objects are used to monitor/manage OSPF neighbors. This object group conforms to RFC 1850. | |
| 1.3.6.1.2.1.14.15.1.11 | GroupospfVirtNbrGroup | deprecated | These objects are used to monitor/manage OSPF virtual neighbors. This object group conforms to RFC 1850. | |
| 1.3.6.1.2.1.14.15.1.12 | GroupospfExtLsdbGroup | deprecated | These objects are used for OSPF systems that display their link state database. This object group conforms to RFC 1850. This object group is replaced by the os… | |
| 1.3.6.1.2.1.14.15.1.13 | GroupospfAreaAggregateGroup | deprecated | These objects are used for OSPF systems to support network prefix aggregation across areas. | |
| 1.3.6.1.2.1.14.15.1.14 | GroupospfLocalLsdbGroup | current | These objects are used for OSPF systems that display their link-local link state databases for non-virtual links. | |
| 1.3.6.1.2.1.14.15.1.15 | GroupospfVirtLocalLsdbGroup | current | These objects are used for OSPF systems that display their link-local link state databases for virtual links. | |
| 1.3.6.1.2.1.14.15.1.16 | GroupospfAsLsdbGroup | current | These objects are used for OSPF systems that display their AS-scope link state database. | |
| 1.3.6.1.2.1.14.15.1.17 | GroupospfBasicGroup2 | current | These objects are used to monitor/manage OSPF global parameters. | |
| 1.3.6.1.2.1.14.15.1.18 | GroupospfAreaGroup2 | current | These objects are used by OSPF systems to support areas. | |
| 1.3.6.1.2.1.14.15.1.19 | GroupospfIfGroup2 | current | These objects are used to monitor/manage OSPF interfaces. | |
| 1.3.6.1.2.1.14.15.1.20 | GroupospfVirtIfGroup2 | current | These objects are used to monitor/manage OSPF virtual interfaces. | |
| 1.3.6.1.2.1.14.15.1.21 | GroupospfNbrGroup2 | current | These objects are used to monitor/manage OSPF neighbors. | |
| 1.3.6.1.2.1.14.15.1.22 | GroupospfVirtNbrGroup2 | current | These objects are used to monitor/manage OSPF virtual neighbors. | |
| 1.3.6.1.2.1.14.15.1.23 | GroupospfAreaAggregateGroup2 | current | These objects are used for OSPF systems to support network prefix aggregation across areas. | |
| 1.3.6.1.2.1.14.15.1.24 | GroupospfAreaLsaCountGroup | current | These objects are used for OSPF systems that display per-area, per-LSA-type counters. | |
| 1.3.6.1.2.1.14.15.1.25 | GroupospfHostGroup2 | current | These objects are used for OSPF systems that support attached hosts. | |
| 1.3.6.1.2.1.14.15.1.26 | GroupospfObsoleteGroup | obsolete | These objects are obsolete and are no longer required for OSPF systems. They are placed into this group for SMI conformance. | |
| 1.3.6.1.2.1.14.15.2 | NodeospfCompliances | |||
| 1.3.6.1.2.1.14.15.2.1 | ComplianceospfCompliance | deprecated | The compliance statement for OSPF systems conforming to RFC 1850. | |
| 1.3.6.1.2.1.14.15.2.2 | ComplianceospfCompliance2 | current | The compliance statement. | |
| 1.3.6.1.2.1.14.15.2.3 | ComplianceospfComplianceObsolete | obsolete | Contains obsolete object groups. | |
| 1.3.6.1.2.1.14.17 | TableospfLocalLsdbTable | not-accessible | current | The OSPF Process's link-local link state database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local… |
| 1.3.6.1.2.1.14.17.1 | RowospfLocalLsdbEntry | not-accessible | current | A single link state advertisement. |
| 1.3.6.1.2.1.14.17.1.1 | ColumnospfLocalLsdbIpAddress | not-accessible | current | The IP address of the interface from which the LSA was received if the interface is numbered. |
| 1.3.6.1.2.1.14.17.1.2 | ColumnospfLocalLsdbAddressLessIf | not-accessible | current | The interface index of the interface from which the LSA was received if the interface is unnumbered. |
| 1.3.6.1.2.1.14.17.1.3 | ColumnospfLocalLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.2.1.14.17.1.4 | ColumnospfLocalLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.2.1.14.17.1.5 | ColumnospfLocalLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.17.1.6 | ColumnospfLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.2.1.14.17.1.7 | ColumnospfLocalLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.17.1.8 | ColumnospfLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.17.1.9 | ColumnospfLocalLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. |
| 1.3.6.1.2.1.14.18 | TableospfVirtLocalLsdbTable | not-accessible | current | The OSPF Process's link-local link state database for virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Lin… |
| 1.3.6.1.2.1.14.18.1 | RowospfVirtLocalLsdbEntry | not-accessible | current | A single link state advertisement. |
| 1.3.6.1.2.1.14.18.1.1 | ColumnospfVirtLocalLsdbTransitArea | not-accessible | current | The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. |
| 1.3.6.1.2.1.14.18.1.2 | ColumnospfVirtLocalLsdbNeighbor | not-accessible | current | The Router ID of the virtual neighbor. |
| 1.3.6.1.2.1.14.18.1.3 | ColumnospfVirtLocalLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.2.1.14.18.1.4 | ColumnospfVirtLocalLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.2.1.14.18.1.5 | ColumnospfVirtLocalLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.18.1.6 | ColumnospfVirtLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.2.1.14.18.1.7 | ColumnospfVirtLocalLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.18.1.8 | ColumnospfVirtLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.18.1.9 | ColumnospfVirtLocalLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.2.1.14.19 | TableospfAsLsdbTable | not-accessible | current | The OSPF Process's AS-scope LSA link state database. The database contains the AS-scope Link State Advertisements from throughout the areas that the device is … |
| 1.3.6.1.2.1.14.19.1 | RowospfAsLsdbEntry | not-accessible | current | A single link state advertisement. |
| 1.3.6.1.2.1.14.19.1.1 | ColumnospfAsLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.2.1.14.19.1.2 | ColumnospfAsLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.2.1.14.19.1.3 | ColumnospfAsLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.19.1.4 | ColumnospfAsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.2.1.14.19.1.5 | ColumnospfAsLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.19.1.6 | ColumnospfAsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.19.1.7 | ColumnospfAsLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.2.1.14.20 | TableospfAreaLsaCountTable | not-accessible | current | This table maintains per-area, per-LSA-type counters |
| 1.3.6.1.2.1.14.20.1 | RowospfAreaLsaCountEntry | not-accessible | current | An entry with a number of link advertisements of a given type for a given area. |
| 1.3.6.1.2.1.14.20.1.1 | ColumnospfAreaLsaCountAreaId | not-accessible | current | This entry Area ID. |
| 1.3.6.1.2.1.14.20.1.2 | ColumnospfAreaLsaCountLsaType | not-accessible | current | This entry LSA type. |
| 1.3.6.1.2.1.14.20.1.3 | ColumnospfAreaLsaCountNumber | read-only | current | Number of LSAs of a given type for a given area. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AreaID | IpAddress | current | An OSPF Area Identifier. Note that the Area ID, in OSPF, has the same format as an IP address, but has the function of defining a summarization point for link state advertisements. |
| BigMetric | Integer32 (0..'FFFFFF'h) | current | The OSPF external metric. |
| DesignatedRouterPriority | Integer32 (0..'FF'h) | current | The range of values defined for the priority of a system for becoming the designated router. |
| HelloRange | Integer32 (1..'FFFF'h) | current | The range of intervals in seconds on which Hello messages are exchanged. |
| Metric | Integer32 (0..'FFFF'h) | current | The OSPF internal metric. Note that the OSPF metric is defined as an unsigned value in the range. |
| OspfAuthenticationType | INTEGER { none (0), simplePassword (1), md5 (2) } | current | The authentication type. |
| PositiveInteger | Integer32 (0..'7FFFFFFF'h) | current | A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues. |
| RouterID | IpAddress | current | A OSPF Router Identifier. Note that the Router ID, in OSPF, has the same format as an IP address, but identifies the router independent of its IP address. |
| Status | INTEGER { enabled (1), disabled (2) } | current | An indication of the operability of an OSPF function or feature. For example, the status of an interface: 'enabled' indicates that it is willing to communicate with other OSPF routers, and 'disabled' indicates that it i… |
| TOSType | Integer32 (0..30) | current | Type of Service (TOS) is defined as a mapping to the IP Type of Service Flags as defined in the IP Forwarding Table MIB + | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | + IP TOS IP TOS Field Policy Field Policy Co… |
| UpToMaxAge | Integer32 (0..3600) | current | The values in seconds that one might find or configure for variables bounded by the maximum age of an LSA. |