OnAccess2200-MIB
1192 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises Gauge |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28350 | Nodefirstmilecom | |||
| 1.3.6.1.4.1.28350.4 | Nodemc | |||
| 1.3.6.1.4.1.28350.4.1 | Nodeonaccess2200 | |||
| 1.3.6.1.4.1.28350.4.1.1 | Nodemc2200-NMC | |||
| 1.3.6.1.4.1.28350.4.1.1.0 | Nodemc2200-SystemInfo | |||
| 1.3.6.1.4.1.28350.4.1.1.0.1 | Scalarmc2200-SysIPAddress | read-only | mandatory | The IP Address used by the Ethernet interface of this device |
| 1.3.6.1.4.1.28350.4.1.1.0.2 | Scalarmc2200-SysSubnetMask | read-only | mandatory | The subnet mask used by the Ethernet interface of this device |
| 1.3.6.1.4.1.28350.4.1.1.0.3 | Scalarmc2200-SysGateway | read-only | mandatory | The IP gateway used by the Ethernet interface of this device |
| 1.3.6.1.4.1.28350.4.1.1.0.4 | Scalarmc2200-SysMACAddress | read-only | mandatory | The MAC Address used by the Ethernet interface of this device |
| 1.3.6.1.4.1.28350.4.1.1.0.5 | Scalarmc2200-SysContact | read-write | mandatory | Mirror of this Management Module's system contact. |
| 1.3.6.1.4.1.28350.4.1.1.0.6 | Scalarmc2200-SysName | read-write | mandatory | Mirror of this Management Module's system name. |
| 1.3.6.1.4.1.28350.4.1.1.0.7 | Scalarmc2200-SysLocation | read-write | mandatory | Mirror of this Management Module's system location |
| 1.3.6.1.4.1.28350.4.1.1.0.8 | Scalarmc2200-SNMPTrapIP1 | read-only | mandatory | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.28350.4.1.1.0.9 | Scalarmc2200-SNMPTrapIP2 | read-only | mandatory | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.28350.4.1.1.0.10 | Scalarmc2200-SNMPTrapIP3 | read-only | mandatory | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.28350.4.1.1.0.11 | Scalarmc2200-SNMPTrapIP4 | read-only | mandatory | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.28350.4.1.1.0.12 | Scalarmc2200-SNMPTrapIP5 | read-only | mandatory | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.28350.4.1.1.0.13 | Scalarmc2200-alarminfor | not-accessible | mandatory | show alarm information. |
| 1.3.6.1.4.1.28350.4.1.1.1 | Nodemc2200-Master | |||
| 1.3.6.1.4.1.28350.4.1.1.1.0 | Nodemc2200-ch0ChassisDetail | |||
| 1.3.6.1.4.1.28350.4.1.1.1.0.1 | Scalarmc2200-ch0Status | read-only | current | Chassis console is connected or disconnected. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.2 | Scalarmc2200-ch0LocalConverterNumber | read-only | current | Number of converters inserted in this chassis. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.3 | Scalarmc2200-ch0RemoteConverterNumber | read-only | current | Number of converters connect with the local cards in this chassis |
| 1.3.6.1.4.1.28350.4.1.1.1.0.4 | Scalarmc2200-ch0PowerA | read-only | current | Power unit B's status ,Active is in use, Standby is on but not use,Off is not |
| 1.3.6.1.4.1.28350.4.1.1.1.0.5 | Scalarmc2200-ch0PowerB | read-only | current | Power unit B's status ,Active is in use, Standby is on but not use,Off is not |
| 1.3.6.1.4.1.28350.4.1.1.1.0.6 | Scalarmc2200-ch0FanA | read-only | current | Fan unit A's status, OK is working,Fault is not. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.7 | Scalarmc2200-ch0FanB | read-only | current | Fan unit B's status, OK is working,Fault is not. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.8 | Scalarmc2200-ch0HardwareVersion | read-only | current | Chassis hardware version |
| 1.3.6.1.4.1.28350.4.1.1.1.0.9 | Scalarmc2200-ch0Description | read-only | current | Chassis Description. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.10 | Scalarmc2200-ch0AvailableConverterSlots | read-only | current | Chassis Available Converter Slots. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.11 | Scalarmc2200-ch0OccupiedSlots | read-only | current | Chassis Occupied Slots. |
| 1.3.6.1.4.1.28350.4.1.1.1.0.12 | Scalarmc2200-ch0EmptySlots | read-only | current | Chassis Empty Slots. |
| 1.3.6.1.4.1.28350.4.1.2 | Nodemc2200-TrapID | |||
| 1.3.6.1.4.1.28350.4.1.2.1 | Nodemc2200-card-PlugIn | A plugInCard trap signifies that some Converter has been pluged in. | ||
| 1.3.6.1.4.1.28350.4.1.2.2 | Nodemc2200-card-PullOut | A pullOutCard trap signifies that some Converter has been pulled out. | ||
| 1.3.6.1.4.1.28350.4.1.2.3 | Nodemc2200-card-Local-Tx-Up | A local-txlink-up trap signifies that some local Converter's Tx link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.4 | Nodemc2200-card-Local-Tx-Down | A local-txlink-down trap signifies that some local Converter's Tx link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.5 | Nodemc2200-card-Local-Fx-Up | A local-fxlink-up trap signifies that some local Converter's Fx link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.6 | Nodemc2200-card-Local-Fx-Down | A local-fxlink-down trap signifies that some local Converter's Fx link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.7 | Nodemc2200-card-Remote-Power-On | A remote-power-on trap signifies that some remote Converter's power has supply on. | ||
| 1.3.6.1.4.1.28350.4.1.2.8 | Nodemc2200-card-Remote-Power-Off | A remote-power-on trap signifies that some remote Converter's power has supply off. | ||
| 1.3.6.1.4.1.28350.4.1.2.9 | Nodemc2200-card-Remote-Tx-Up | A remote-txlink-up trap signifies that some remote Converter's Tx link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.10 | Nodemc2200-card-Remote-Tx-Down | A remote-txlink-down trap signifies that some remote Converter's Tx link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.11 | Nodemc2200-chassis-Power-A-Active | A Power-A-Active trap signifies that Power A in chassis is actived | ||
| 1.3.6.1.4.1.28350.4.1.2.12 | Nodemc2200-chassis-Power-A-Down | A Power-A-down trap signifies that Power A in chassis Failed | ||
| 1.3.6.1.4.1.28350.4.1.2.13 | Nodemc2200-chassis-Power-A-Standby | A Power-A-Standby trap signifies that Power A stauts is change to standby | ||
| 1.3.6.1.4.1.28350.4.1.2.14 | Nodemc2200-chassis-Power-B-Active | A Power-B-Active trap signifies that Power B in chassis is actived | ||
| 1.3.6.1.4.1.28350.4.1.2.15 | Nodemc2200-chassis-Power-B-Down | A Power-B-down trap signifies that Power B in chassis Failed | ||
| 1.3.6.1.4.1.28350.4.1.2.16 | Nodemc2200-chassis-Power-B-Standby | A Power-B-Standby trap signifies that Power B stauts is change to standby | ||
| 1.3.6.1.4.1.28350.4.1.2.17 | Nodemc2200-chassis-Fan-A-Up | A Fan-A-up trap signifies that Fan A in chassis is OK | ||
| 1.3.6.1.4.1.28350.4.1.2.18 | Nodemc2200-chassis-Fan-A-Down | A Fan-A-down trap signifies that Fan A in chassis Failed | ||
| 1.3.6.1.4.1.28350.4.1.2.19 | Nodemc2200-chassis-Fan-B-Up | A Fan-B-up trap signifies that Fan B in chassis is OK | ||
| 1.3.6.1.4.1.28350.4.1.2.20 | Nodemc2200-chassis-Fan-B-Down | A Fan-B-down trap signifies that Fan B in chassis Failed | ||
| 1.3.6.1.4.1.28350.4.1.2.21 | Nodemc2200-chassis-Connected | A chassis-find trap signifies that some Slave Chassis console has been Connected. | ||
| 1.3.6.1.4.1.28350.4.1.2.22 | Nodemc2200-chassis-Disconnected | A chassis-lost trap signifies that some Slave Chassis console has been disconnected. | ||
| 1.3.6.1.4.1.28350.4.1.2.23 | Nodemc2200-GEMux8-local-WAN-linkup | A mc2200-GEMux8-local-WAN-linkup trap signifies that some local GEMux8 Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.24 | Nodemc2200-GEMux8-local-WAN-linkdown | A mc2200-GEMux8-local-WAN-linkdown trap signifies that some local GEMux8 Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.25 | Nodemc2200-GEMux8-local-LAN-linkup | A mc2200-GEMux8-local-LAN-linkup trap signifies that some local GEMux8 Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.26 | Nodemc2200-GEMux8-local-LAN-linkdown | A mc2200-GEMux8-local-LAN-linkdown trap signifies that some local GEMux8 Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.27 | Nodemc2200-GEMux8-local-PORT1-linkup | A mc2200-GEMux8-local-PORT1-linkup trap signifies that some local GEMux8 Converter's Port1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.28 | Nodemc2200-GEMux8-local-PORT1-linkdown | A mc2200-GEMux8-local-PORT1-linkdown trap signifies that some local GEMux8 Converter's Port1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.29 | Nodemc2200-GEMux8-local-PORT2-linkup | A mc2200-GEMux8-local-PORT2-linkup trap signifies that some local GEMux8 Converter's Port 2 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.30 | Nodemc2200-GEMux8-local-PORT2-linkdown | A mc2200-GEMux8-local-PORT2-linkdown trap signifies that some local GEMux8 Converter's Port 2 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.31 | Nodemc2200-GEMux8-local-PORT3-linkup | A mc2200-GEMux8-local-PORT3-linkup trap signifies that some local GEMux8 Converter's Port 3 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.32 | Nodemc2200-GEMux8-local-PORT3-linkdown | A mc2200-GEMux8-local-PORT3-linkdown trap signifies that some local GEMux8 Converter's Port 3 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.33 | Nodemc2200-GEMux8-local-PORT4-linkup | A mc2200-GEMux8-local-PORT4-linkup trap signifies that some local GEMux8 Converter's Port 4 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.34 | Nodemc2200-GEMux8-local-PORT4-linkdown | A mc2200-GEMux8-local-PORT4-linkdown trap signifies that some local GEMux8 Converter's Port 4 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.35 | Nodemc2200-GEMux8-local-PORT5-linkup | A mc2200-GEMux8-local-PORT5-linkup trap signifies that some local GEMux8 Converter's Port 5 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.36 | Nodemc2200-GEMux8-local-PORT5-linkdown | A mc2200-GEMux8-local-PORT5-linkdown trap signifies that some local GEMux8 Converter's Port 5 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.37 | Nodemc2200-GEMux8-local-PORT6-linkup | A mc2200-GEMux8-local-PORT6-linkup trap signifies that some local GEMux8 Converter's Port 6 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.38 | Nodemc2200-GEMux8-local-PORT6-linkdown | A mc2200-GEMux8-local-PORT6-linkdown trap signifies that some local GEMux8 Converter's Port 6 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.39 | Nodemc2200-GEMux8-local-PORT7-linkup | A mc2200-GEMux8-local-PORT7-linkup trap signifies that some local GEMux8 Converter's Port 7 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.40 | Nodemc2200-GEMux8-local-PORT7-linkdown | A mc2200-GEMux8-local-PORT7-linkdown trap signifies that some local GEMux8 Converter's Port 7 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.41 | Nodemc2200-GEMux8-local-PORT8-linkup | A mc2200-GEMux8-local-PORT8-linkup trap signifies that some local GEMux8 Converter's Port 8 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.42 | Nodemc2200-GEMux8-local-PORT8-linkdown | A mc2200-GEMux8-local-PORT8-linkdown trap signifies that some local GEMux8 Converter's Port 8 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.43 | Nodemc2200-GEMux8-remote-LAN-linkup | A mc2200-GEMux8-remote-LAN-linkup trap signifies that some remote GEMux8 Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.44 | Nodemc2200-GEMux8-remote-LAN-linkdown | A mc2200-GEMux8-remote-LAN-linkdown trap signifies that some remote GEMux8 Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.45 | Nodemc2200-GEMux8-remote-PORT1-linkup | A mc2200-GEMux8-remote-PORT1-linkup trap signifies that some remote GEMux8 Converter's Port1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.46 | Nodemc2200-GEMux8-remote-PORT1-linkdown | A mc2200-GEMux8-remote-PORT1-linkdown trap signifies that some remote GEMux8 Converter's Port1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.47 | Nodemc2200-GEMux8-remote-PORT2-linkup | A mc2200-GEMux8-remote-PORT2-linkup trap signifies that some remote GEMux8 Converter's Port 2 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.48 | Nodemc2200-GEMux8-remote-PORT2-linkdown | A mc2200-GEMux8-remote-PORT2-linkdown trap signifies that some remote GEMux8 Converter's Port 2 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.49 | Nodemc2200-GEMux8-remote-PORT3-linkup | A mc2200-GEMux8-remote-PORT3-linkup trap signifies that some remote GEMux8 Converter's Port 3 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.50 | Nodemc2200-GEMux8-remote-PORT3-linkdown | A mc2200-GEMux8-remote-PORT3-linkdown trap signifies that some remote GEMux8 Converter's Port 3 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.51 | Nodemc2200-GEMux8-remote-PORT4-linkup | A mc2200-GEMux8-remote-PORT4-linkup trap signifies that some remote GEMux8 Converter's Port 4 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.52 | Nodemc2200-GEMux8-remote-PORT4-linkdown | A mc2200-GEMux8-remote-PORT4-linkdown trap signifies that some remote GEMux8 Converter's Port 4 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.53 | Nodemc2200-GEMux8-remote-PORT5-linkup | A mc2200-GEMux8-remote-PORT5-linkup trap signifies that some remote GEMux8 Converter's Port 5 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.54 | Nodemc2200-GEMux8-remote-PORT5-linkdown | A mc2200-GEMux8-remote-PORT5-linkdown trap signifies that some remote GEMux8 Converter's Port 5 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.55 | Nodemc2200-GEMux8-remote-PORT6-linkup | A mc2200-GEMux8-remote-PORT6-linkup trap signifies that some remote GEMux8 Converter's Port 6 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.56 | Nodemc2200-GEMux8-remote-PORT6-linkdown | A mc2200-GEMux8-remote-PORT6-linkdown trap signifies that some remote GEMux8 Converter's Port 6 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.57 | Nodemc2200-GEMux8-remote-PORT7-linkup | A mc2200-GEMux8-remote-PORT7-linkup trap signifies that some remote GEMux8 Converter's Port 7 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.58 | Nodemc2200-GEMux8-remote-PORT7-linkdown | A mc2200-GEMux8-remote-PORT7-linkdown trap signifies that some remote GEMux8 Converter's Port 7 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.59 | Nodemc2200-GEMux8-remote-PORT8-linkup | A mc2200-GEMux8-remote-PORT8-linkup trap signifies that some remote GEMux8 Converter's Port 8 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.60 | Nodemc2200-GEMux8-remote-PORT8-linkdown | A mc2200-GEMux8-remote-PORT8-linkdown trap signifies that some remote GEMux8 Converter's Port 8 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.61 | Nodemc2200-GEMux8-remote-PORT9-linkup | A fmc-GEMux8-remote-PORT8-linkup trap signifies that some remote GEMux8 Converter's Port 8 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.62 | Nodemc2200-GEMux8-remote-PORT9-linkdown | A fmc-GEMux8-remote-PORT8-linkdown trap signifies that some remote GEMux8 Converter's Port 8 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.63 | Nodemc2200-chassis-Power-Card-PlugIn | A chassis-Power-Card-PlugIn trap signifies that power card in chassis has been pluged in | ||
| 1.3.6.1.4.1.28350.4.1.2.64 | Nodemc2200-chassis-Power-Card-Removed | A chassis-Power-Card-Removed trap signifies that power card in chassis has been removed | ||
| 1.3.6.1.4.1.28350.4.1.2.65 | Nodemc2200-card-Remote-PowerA-Up-PowerB-Down | A card-Remote-PowerA_On-PowerB_Off trap signifies that some remote Converter's power A has supply on and Power B has supply off. | ||
| 1.3.6.1.4.1.28350.4.1.2.66 | Nodemc2200-card-Remote-PowerA-Down-PowerB-Up | A rcard-Remote-PowerA_Off-PowerB_On trap signifies that some remote Converter's power A has supply off and Power B has supply off. | ||
| 1.3.6.1.4.1.28350.4.1.2.67 | Nodemc2200-GEMC-local-LAN-linkup | A mc2200-GEMC-local-LAN-linkup trap signifies that some local GEMC Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.68 | Nodemc2200-GEMC-local-LAN-linkdown | A mc2200-GEMC-local-LAN-linkdown trap signifies that some local GEMC Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.69 | Nodemc2200-GEMC-local-WAN-linkup | A mc2200-GEMC-local-WAN-linkup trap signifies that some local GEMC Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.70 | Nodemc2200-GEMC-local-WAN-linkdown | A mc2200-GEMC-local-WAN-linkdown trap signifies that some local GEMC Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.71 | Nodemc2200-GEMC-remote-LAN-linkup | A mc2200-GEMC-remote-LAN-linkup trap signifies that some remote GEMC Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.72 | Nodemc2200-GEMC-remote-LAN-linkdown | A mc2200-GEMC-local-PORT1-linkdown trap signifies that some remote GEMC Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.73 | Nodemc2200-GEMC4-local-LAN1-linkup | A mc2200-GEMC4-local-LAN1-linkup trap signifies that some local GEMC4 Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.74 | Nodemc2200-GEMC4-local-LAN1-linkdown | A mc2200-GEMC4-local-LAN1-linkdown trap signifies that some local GEMC4 Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.75 | Nodemc2200-GEMC4-local-LAN2-linkup | A mc2200-GEMC4-local-LAN2-linkup trap signifies that some local GEMC4 Converter's LAN2 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.76 | Nodemc2200-GEMC4-local-LAN2-linkdown | A mc2200-GEMC4-local-LAN2-linkdown trap signifies that some local GEMC4 Converter's LAN2 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.77 | Nodemc2200-GEMC4-local-WAN2LAN3-linkup | A mc2200-GEMC4-local-LAN3-linkup trap signifies that some local GEMC4 Converter's WAN2-LAN3 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.78 | Nodemc2200-GEMC4-local-WAN2LAN3-linkdown | A mc2200-GEMC4-local-LAN3-linkdown trap signifies that some local GEMC4 Converter's WAN2-LAN3 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.79 | Nodemc2200-GEMC4-local-WAN1-linkup | A mc2200-GEMC4-local-WAN1-linkup trap signifies that some local GEMC4 Converter's WAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.80 | Nodemc2200-GEMC4-local-WAN1-linkdown | A mc2200-GEMC4-local-WAN1-linkdown trap signifies that some local GEMC4 Converter's WAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.81 | Nodemc2200-GEMC4-remote-LAN1-linkup | A mc2200-GEMC4-remote-LAN1-linkup trap signifies that some remote GEMC4 Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.82 | Nodemc2200-GEMC4-remote-LAN1-linkdown | A mc2200-GEMC4-remote-LAN1-linkdown trap signifies that some remote GEMC4 Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.83 | Nodemc2200-GEMC4-remote-LAN2-linkup | A mc2200-GEMC4-remote-LAN2-linkup trap signifies that some remote GEMC4 Converter's LAN2 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.84 | Nodemc2200-GEMC4-remote-LAN2-linkdown | A mc2200-GEMC4-remote-LAN2-linkdown trap signifies that some remote GEMC4 Converter's LAN2 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.85 | Nodemc2200-GEMC4-remote-WAN2LAN3-linkup | A mc2200-GEMC4-remote-LAN3-linkup trap signifies that some remote GEMC4 Converter's WAN2-LAN3 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.86 | Nodemc2200-GEMC4-remote-WAN2LAN3-linkdown | A mc2200-GEMC4-remote-LAN3-linkdown trap signifies that some remote GEMC4 Converter's WAN2-LAN3 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.97 | Nodemc2200-GEMC2-local-LAN-linkup | A mc2200-GEMC2-local-LAN-linkup trap signifies that some local GEMC2 Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.98 | Nodemc2200-GEMC2-local-LAN-linkdown | A mc2200-GEMC2-local-LAN-linkdown trap signifies that some local GEMC2 Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.99 | Nodemc2200-GEMC2-local-WAN-linkup | A mc2200-GEMC2-local-WAN-linkup trap signifies that some local GEMC2 Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.100 | Nodemc2200-GEMC2-local-WAN-linkdown | A mc2200-GEMC2-local-WAN-linkdown trap signifies that some local GEMC2 Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.101 | Nodemc2200-GEMC2-remote-LAN-linkup | A mc2200-GEMC2-remote-LAN-linkup trap signifies that some remote GEMC2 Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.102 | Nodemc2200-GEMC2-remote-LAN-linkdown | A mc2200-GEMC2-remote-LAN-linkdown trap signifies that some remote GEMC2 Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.103 | Nodemc2200-GEMC2E-local-LAN-linkup | A mc2200-GEMC2E-local-LAN-linkup trap signifies that some local GEMC2E Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.104 | Nodemc2200-GEMC2E-local-LAN-linkdown | A mc2200-GEMC2E-local-LAN-linkdown trap signifies that some local GEMC2E Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.105 | Nodemc2200-GEMC2E-local-WAN-linkup | A mc2200-GEMC2E-local-WAN-linkup trap signifies that some local GEMC2E Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.106 | Nodemc2200-GEMC2E-local-WAN-linkdown | A mc2200-GEMC2E-local-WAN-linkdown trap signifies that some local GEMC2E Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.107 | Nodemc2200-GEMC2E-remote-LAN-linkup | A mc2200-GEMC2E-remote-LAN-linkup trap signifies that some remote GEMC2E Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.108 | Nodemc2200-GEMC2E-remote-LAN-linkdown | A mc2200-GEMC2E-remote-LAN-linkdown trap signifies that some remote GEMC2E Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.109 | Nodemc2200-GE-FE-MC-local-LAN-linkup | A GE/FE-MC-local-LAN-linkup trap signifies that some local GE/FE-MC Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.110 | Nodemc2200-GE-FE-MC-local-LAN-linkdown | A GE/FE-MC-local-LAN-linkdown trap signifies that some local GE/FE-MC Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.111 | Nodemc2200-GE-FE-MC-local-WAN-linkup | A GE/FE-MC-local-WAN-linkup trap signifies that some local GE/FE-MC Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.112 | Nodemc2200-GE-FE-MC-local-WAN-linkdown | A GE/FE-MC-local-WAN-linkdown trap signifies that some local GE/FE-MC Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.113 | Nodemc2200-GE-FE-MC-remote-LAN-linkup | A GE/FE-MC-remote-LAN-linkup trap signifies that some remote GE/FE-MC Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.114 | Nodemc2200-GE-FE-MC-remote-LAN-linkdown | A GE/FE-MC-remote-LAN-linkdown trap signifies that some remote GE/FE-MC Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.115 | Nodemc2200-GE-FE-MC2S-local-LAN-linkup | A GE/FE-MC2S-local-LAN-linkup trap signifies that some local GE/FE-MC2S Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.116 | Nodemc2200-GE-FE-MC2S-local-LAN-linkdown | A GE/FE-MC2S-local-LAN-linkdown trap signifies that some local GE/FE-MC2S Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.117 | Nodemc2200-GE-FE-MC2S-local-WAN-linkup | A GE/FE-MC2S-local-WAN-linkup trap signifies that some local GE/FE-MC2S Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.118 | Nodemc2200-GE-FE-MC2S-local-WAN-linkdown | A GE/FE-MC2S-local-WAN-linkdown trap signifies that some local GE/FE-MC2S Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.119 | Nodemc2200-GE-FE-MC2S-remote-LAN-linkup | A GE/FE-MC2S-remote-LAN-linkup trap signifies that some remote GE/FE-MC2S Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.120 | Nodemc2200-GE-FE-MC2S-remote-LAN-linkdown | A GE/FE-MC2S-remote-LAN-linkdown trap signifies that some remote GE/FE-MC2S Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.121 | Nodemc2200-GE-FE-MC2T-local-LAN-linkup | A GE/FE-MC2T-local-LAN-linkup trap signifies that some local GE/FE-MC2T Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.122 | Nodemc2200-GE-FE-MC2T-local-LAN-linkdown | A GE/FE-MC2T-local-LAN-linkdown trap signifies that some local GE/FE-MC2T Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.123 | Nodemc2200-GE-FE-MC2T-local-WAN-linkup | A GE/FE-MC2S-local-WAN-linkup trap signifies that some local GE/FE-MC2T Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.124 | Nodemc2200-GE-FE-MC2T-local-WAN-linkdown | A GE/FE-MC2T-local-WAN-linkdown trap signifies that some local GE/FE-MC2T Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.125 | Nodemc2200-GE-FE-MC2T-remote-LAN-linkup | A GE/FE-MC2T-remote-LAN-linkup trap signifies that some remote GE/FE-MC2T Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.126 | Nodemc2200-GE-FE-MC2T-remote-LAN-linkdown | A GE/FE-MC2T-remote-LAN-linkdown trap signifies that some remote GE/FE-MC2T Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.127 | Nodemc2200-FE-SFP-local-LAN-linkup | A FE-SFP-local-LAN-linkup trap signifies that some local FE-SFP Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.128 | Nodemc2200-FE-SFP-local-LAN-linkdown | A FE-SFP-local-LAN-linkdown trap signifies that some local FE-SFP Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.129 | Nodemc2200-FE-SFP-local-WAN-linkup | A FE-SFP-local-WAN-linkup trap signifies that some local FE-SFP Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.130 | Nodemc2200-FE-SFP-local-WAN-linkdown | A FE-SFP-local-WAN-linkdown trap signifies that some local FE-SFP Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.131 | Nodemc2200-FE-SFP-remote-LAN-linkup | A FE-SFP-remote-LAN-linkup trap signifies that some remote FE-SFP Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.132 | Nodemc2200-FE-SFP-remote-LAN-linkdown | A FE-SFP-remote-LAN-linkdown trap signifies that some remote FE-SFP Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.133 | Nodemc2200-GE-SFP-local-LAN-linkup | A GE-SFP-local-LAN-linkup trap signifies that some local GE-SFP Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.134 | Nodemc2200-GE-SFP-local-LAN-linkdown | A GE-SFP-local-LAN-linkdown trap signifies that some local GE-SFP Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.135 | Nodemc2200-GE-SFP-local-WAN-linkup | A GE-SFP-local-WAN-linkup trap signifies that some local GE-SFP Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.136 | Nodemc2200-GE-SFP-local-WAN-linkdown | A GE-SFP-local-WAN-linkdown trap signifies that some local GE-SFP Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.137 | Nodemc2200-GE-SFP-remote-LAN-linkup | A GE-SFP-remote-LAN-linkup trap signifies that some remote GE-SFP Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.138 | Nodemc2200-GE-SFP-remote-LAN-linkdown | A GE-SFP-remote-LAN-linkdown trap signifies that some remote GE-SFP Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.139 | Nodemc2200-GE-MC3-local-LAN-linkup | A GE-MC3-local-LAN-linkup trap signifies that some local GE-MC3 Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.140 | Nodemc2200-GE-MC3-local-LAN-linkdown | A GE-MC3-local-LAN-linkdown trap signifies that some local GE-MC3 Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.141 | Nodemc2200-GE-MC3-local-WAN-linkup | A GE-MC3-local-WAN-linkup trap signifies that some local GE-MC3 Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.142 | Nodemc2200-GE-MC3-local-WAN-linkdown | A GE-MC3-local-WAN-linkdown trap signifies that some local GE-MC3 Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.143 | Nodemc2200-GE-MC3-remote-LAN-linkup | A GE-MC3-remote-LAN-linkup trap signifies that some remote GE-MC3 Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.144 | Nodemc2200-GE-MC3-remote-LAN-linkdown | A GE-SFP-remote-LAN-linkdown trap signifies that some remote GE-MC3 Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.145 | Nodemc2200-GE-SFP-APS-local-LAN-linkup | A GE-SFP-APS-local-LAN-linkup trap signifies that some local GE-SFP-APS Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.146 | Nodemc2200-GE-SFP-APS-local-LAN-linkdown | A GE-SFP-APS-local-LAN-linkdown trap signifies that some local GE-SFP-APS Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.147 | Nodemc2200-GE-SFP-APS-local-WAN1-linkup | A GE-SFP-APS-local-WAN-linkup trap signifies that some local GE-SFP-APS Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.148 | Nodemc2200-GE-SFP-APS-local-WAN1-linkdown | A GE-SFP-APS-local-WAN-linkdown trap signifies that some local GE-SFP-APS Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.149 | Nodemc2200-GE-SFP-APS-local-WAN2-linkup | A GE-SFP-APS-local-WAN-linkup trap signifies that some local GE-SFP-APS Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.150 | Nodemc2200-GE-SFP-APS-local-WAN2-linkdown | A GE-SFP-APS-local-WAN-linkdown trap signifies that some local GE-SFP-APS Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.151 | Nodemc2200-GE-SFP-APS-remote-LAN-linkup | A GE-SFP-APS-remote-LAN-linkup trap signifies that some remote GE-SFP-APS Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.152 | Nodemc2200-GE-SFP-APS-remote-LAN-linkdown | A GE-SFP-APS-remote-LAN-linkdown trap signifies that some remote GE-SFP-APS Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.153 | Nodemc2200-GE-MC-APS-local-LAN-linkup | A GE-MC-APS-local-LAN-linkup trap signifies that some local GE-MC-APS Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.154 | Nodemc2200-GE-MC-APS-local-LAN-linkdown | A GE-MC-APS-local-LAN-linkdown trap signifies that some local GE-MC-APS Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.155 | Nodemc2200-GE-MC-APS-local-WAN1-linkup | A GE-MC-APS-local-WAN-linkup trap signifies that some local GE-MC-APS Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.156 | Nodemc2200-GE-MC-APS-local-WAN1-linkdown | A GE-MC-APS-local-WAN-linkdown trap signifies that some local GE-MC-APS Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.157 | Nodemc2200-GE-MC-APS-local-WAN2-linkup | A GE-MC-APS-local-WAN-linkup trap signifies that some local GE-MC-APS Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.158 | Nodemc2200-GE-MC-APS-local-WAN2-linkdown | A GE-MC-APS-local-WAN-linkdown trap signifies that some local GE-MC-APS Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.159 | Nodemc2200-GE-MC-APS-remote-LAN-linkup | A GE-MC-APS-remote-LAN-linkup trap signifies that some remote GE-MC-APS Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.160 | Nodemc2200-GE-MC-APS-remote-LAN-linkdown | A GE-MC-APS-remote-LAN-linkdown trap signifies that some remote GE-MC-APS Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.161 | Nodemc2200-CARD-WAN1-switch-WAN2 | The card's active port switches from WAN1 to WAN2. | ||
| 1.3.6.1.4.1.28350.4.1.2.162 | Nodemc2200-CARD-WAN2-switch-WAN1 | The card's active port switches from WAN2 to WAN1. | ||
| 1.3.6.1.4.1.28350.4.1.2.163 | Nodemc2200-OAPS-local-LAN-linkup | A OAPS-local-LAN-linkup trap signifies that some local OAPS Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.164 | Nodemc2200-OAPS-local-LAN-linkdown | A OAPS-local-LAN-linkdown trap signifies that some local OAPS Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.165 | Nodemc2200-OAPS-local-WAN1-linkup | A OAPS-local-WAN-linkup trap signifies that some local OAPS Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.166 | Nodemc2200-OAPS-local-WAN1-linkdown | A OAPS-local-WAN-linkdown trap signifies that some local OAPS Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.167 | Nodemc2200-OAPS-local-WAN2-linkup | A OAPS-local-WAN-linkup trap signifies that some local OAPS Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.168 | Nodemc2200-OAPS-local-WAN2-linkdown | A OAPS-local-WAN-linkdown trap signifies that some local OAPS Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.169 | Nodemc2200-PORT-RX-POWER-LOW | The card port rx power low or normal | ||
| 1.3.6.1.4.1.28350.4.1.2.170 | Nodemc2200-PORT-RX-POWER-NORMAL | The card port rx power low or normal | ||
| 1.3.6.1.4.1.28350.4.1.2.171 | Nodemc2200-QS2204-local-LAN1-linkup | A QS2204-local-LAN1-linkup trap signifies that some local QS2204 Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.172 | Nodemc2200-QS2204-local-LAN1-linkdown | A QS2204-local-LAN1-linkdown trap signifies that some local QS2204 Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.173 | Nodemc2200-QS2204-local-LAN2-linkup | A QS2204-local-LAN2-linkup trap signifies that some local QS2204 Converter's LAN2 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.174 | Nodemc2200-QS2204-local-LAN2-linkdown | A QS2204-local-LAN2-linkdown trap signifies that some local QS2204 Converter's LAN2 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.175 | Nodemc2200-QS2204-local-LAN3-linkup | A QS2204-local-LAN3-linkup trap signifies that some local QS2204 Converter's LAN3 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.176 | Nodemc2200-QS2204-local-LAN3-linkdown | A QS2204-local-LAN3-linkdown trap signifies that some local QS2204 Converter's LAN3 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.177 | Nodemc2200-QS2204-local-LAN4-linkup | A QS2204-local-LAN4-linkup trap signifies that some local QS2204 Converter's LAN4 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.178 | Nodemc2200-QS2204-local-LAN4-linkdown | A QS2204-local-LAN4-linkdown trap signifies that some local QS2204 Converter's LAN4 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.179 | Nodemc2200-QS2204-local-WAN-lane1-linkup | A QS2204-local-WAN-lane1-linkup trap signifies that some local QS2204 Converter's WAN lane1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.180 | Nodemc2200-QS2204-local-WAN-lane1-linkdown | A QS2204-local-WAN-lane1-linkdown trap signifies that some local QS2204 Converter's WAN lane1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.181 | Nodemc2200-QS2204-local-WAN-lane2-linkup | A QS2204-local-WAN-lane2-linkup trap signifies that some local QS2204 Converter's WAN lane2 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.182 | Nodemc2200-QS2204-local-WAN-lane2-linkdown | A QS2204-local-WAN-lane2-linkdown trap signifies that some local QS2204 Converter's WAN lane2 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.183 | Nodemc2200-QS2204-local-WAN-lane3-linkup | A QS2204-local-WAN-lane3-linkup trap signifies that some local QS2204 Converter's WAN lane3 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.184 | Nodemc2200-QS2204-local-WAN-lane3-linkdown | A QS2204-local-WAN-lane3-linkdown trap signifies that some local QS2204 Converter's WAN lane3 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.185 | Nodemc2200-QS2204-local-WAN-lane4-linkup | A QS2204-local-WAN-lane4-linkup trap signifies that some local QS2204 Converter's WAN lane4 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.186 | Nodemc2200-QS2204-local-WAN-lane4-linkdown | A QS2204-local-WAN-lane4-linkdown trap signifies that some local QS2204 Converter's WAN lane4 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.187 | Nodemc2200-QS2204-local-LAN1-txup | A QS2204-local-LAN1-txup trap signifies that some local QS2204 Converter's LAN1 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.188 | Nodemc2200-QS2204-local-LAN1-txdown | A QS2204-local-LAN1-txdown trap signifies that some local QS2204 Converter's LAN1 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.189 | Nodemc2200-QS2204-local-LAN2-txup | A QS2204-local-LAN2-txup trap signifies that some local QS2204 Converter's LAN2 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.190 | Nodemc2200-QS2204-local-LAN2-txdown | A QS2204-local-LAN2-txdown trap signifies that some local QS2204 Converter's LAN2 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.191 | Nodemc2200-QS2204-local-LAN3-txkup | A QS2204-local-LAN3-txup trap signifies that some local QS2204 Converter's LAN3 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.192 | Nodemc2200-QS2204-local-LAN3-txdown | A QS2204-local-LAN3-txdown trap signifies that some local QS2204 Converter's LAN3 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.193 | Nodemc2200-QS2204-local-LAN4-txup | A QS2204-local-LAN4-txup trap signifies that some local QS2204 Converter's LAN4 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.194 | Nodemc2200-QS2204-local-LAN4-txdown | A QS2204-local-LAN4-txdown trap signifies that some local QS2204 Converter's LAN4 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.195 | Nodemc2200-QS2204-local-WAN-lane1-txup | A QS2204-local-WAN-lane1-txup trap signifies that some local QS2204 Converter's WAN lane1 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.196 | Nodemc2200-QS2204-local-WAN-lane1-txdown | A QS2204-local-WAN-lane1-txdown trap signifies that some local QS2204 Converter's WAN lane1 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.197 | Nodemc2200-QS2204-local-WAN-lane2-txup | A QS2204-local-WAN-lane2-txup trap signifies that some local QS2204 Converter's WAN lane2 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.198 | Nodemc2200-QS2204-local-WAN-lane2-txdown | A QS2204-local-WAN-lane2-txdown trap signifies that some local QS2204 Converter's WAN lane2 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.199 | Nodemc2200-QS2204-local-WAN-lane3-txup | A QS2204-local-WAN-lane3-txup trap signifies that some local QS2204 Converter's WAN lane3 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.200 | Nodemc2200-QS2204-local-WAN-lane3-txdown | A QS2204-local-WAN-lane3-txdown trap signifies that some local QS2204 Converter's WAN lane3 tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.201 | Nodemc2200-QS2204-local-WAN-lane4-txup | A QS2204-local-WAN-lane4-txup trap signifies that some local QS2204 Converter's WAN lane4 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.202 | Nodemc2200-QS2204-local-WAN-lane4-txdown | A QS2204-local-WAN-lane4-txdown trap signifies that some local QS2204 Converter's WAN lane4 tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.203 | Nodemc2200-Q2202-local-LAN-linkup | A Q2202-local-LAN-linkup trap signifies that some local Q2202 Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.204 | Nodemc2200-Q2202-local-LAN-linkdown | A Q2202-local-LAN-linkdown trap signifies that some local Q2202 Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.205 | Nodemc2200-Q2202-local-WAN-linkup | A Q2202-local-WAN-linkup trap signifies that some local Q2202 Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.206 | Nodemc2200-Q2202-local-WAN-linkdown | A Q2202-local-WAN-linkdown trap signifies that some local Q2202 Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.207 | Nodemc2200-Q2202-local-LAN-txup | A Q2202-local-LAN-tx state up trap signifies that some local Q2202 Converter's LAN tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.208 | Nodemc2200-Q2202-local-LAN-txdown | A Q2202-local-LAN-tx state down trap signifies that some local Q2202 Converter's LAN tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.209 | Nodemc2200-Q2202-local-WAN-txup | A Q2202-local-WAN-tx state up trap signifies that some local Q2202 Converter's WAN tx state has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.210 | Nodemc2200-Q2202-local-WAN-txdown | A Q2202-local-WAN-tx state down trap signifies that some local Q2202 Converter's WAN tx state has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.211 | Nodemc2200-Q2202-rate-40G | A Q2202-rate-40G trap signifies that some local Q2202 Converter's rate has transitioned into 40G. | ||
| 1.3.6.1.4.1.28350.4.1.2.212 | Nodemc2200-Q2202-rate-100G | A Q2202-rate-100G trap signifies that some local Q2202 Converter's rate has transitioned into 100G. | ||
| 1.3.6.1.4.1.28350.4.1.2.213 | Nodemc2200-card-Remote-Connected | A local-remote-connected trap signifies that some remote Converter's connected state. | ||
| 1.3.6.1.4.1.28350.4.1.2.214 | Nodemc2200-card-Remote-Disconnected | A local-remote-disconnected trap signifies that some remote Converter's disconnected state. | ||
| 1.3.6.1.4.1.28350.4.1.2.215 | Nodemc2200-card-SFP-model-insert | A card sfp model insert trap signifies that some port sfp model insert state. | ||
| 1.3.6.1.4.1.28350.4.1.2.216 | Nodemc2200-card-SFP-model-pull-out | A card sfp model pull out trap signifies that some port sfp model pull out state. | ||
| 1.3.6.1.4.1.28350.4.1.2.217 | Nodemc2200-card-loopback | A card loopback trap signifies that some card loopback state. | ||
| 1.3.6.1.4.1.28350.4.1.2.218 | Nodemc2200-NMCsystemStatus | A mc2200 NMC system status change. | ||
| 1.3.6.1.4.1.28350.4.1.2.219 | Nodemc2200-FE-MC-local-LAN-linkup | A FE-MC-local-LAN-linkup trap signifies that some local FE-MC Converter's LAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.220 | Nodemc2200-FE-MC-local-LAN-linkdown | A FE-MC-local-LAN-linkdown trap signifies that some local FE-MC Converter's LAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.221 | Nodemc2200-FE-MC-local-WAN-linkup | A FE-MC-local-WAN-linkup trap signifies that some local FE-MC Converter's WAN link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.222 | Nodemc2200-FE-MC-local-WAN-linkdown | A FE-MC-local-WAN-linkdown trap signifies that some local FE-MC Converter's WAN link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.2.223 | Nodemc2200-FE-MC-remote-LAN-linkup | A FE-MC-remote-LAN-linkup trap signifies that some remote FE-MC Converter's LAN1 link has transitioned into the up state. | ||
| 1.3.6.1.4.1.28350.4.1.2.224 | Nodemc2200-FE-MC-remote-LAN-linkdown | A GE-SFP-remote-LAN-linkdown trap signifies that some remote FE-MC Converter's LAN1 link has transitioned into the down state. | ||
| 1.3.6.1.4.1.28350.4.1.3 | Nodemc2200-GEmib | |||
| 1.3.6.1.4.1.28350.4.1.3.1 | Tablemc2200-GEmux8Table | not-accessible | current | Sparse table containing one entry for each GEmux8 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotInde… |
| 1.3.6.1.4.1.28350.4.1.3.1.1 | Rowmc2200-GEmux8Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GEmux8 media converter, then entry 'n' in this table exists an… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.2 | Columnmc2200-GEmux8CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.1.1.3 | Columnmc2200-GEmux8LocalLANSFPInfo | read-only | current | GEMux8 Local card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.4 | Columnmc2200-GEmux8LocalLANLink | read-only | mandatory | GEmux8 Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.5 | Columnmc2200-GEmux8LocalWANSFPInfo | read-only | current | GEMux8 Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.6 | Columnmc2200-GEmux8LocalWANLink | read-only | current | GEmux8 Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.7 | Columnmc2200-GEmux8APSActivePort | read-write | current | GEmux8 APS Active Port setting. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.8 | Columnmc2200-GEmux8LocalPort1Link | read-only | current | GEmux8 Local card's port1 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.9 | Columnmc2200-GEmux8LocalPort1Speed | read-only | current | GEmux8 Local card's port1 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.10 | Columnmc2200-GEmux8LocalPort1Duplex | read-only | current | GEmux8 Local card's port1 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.11 | Columnmc2200-GEmux8LocalPort1TxRate | read-write | current | GEmux8 Local card's port1 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.12 | Columnmc2200-GEmux8LocalPort1RxRate | read-write | current | GEmux8 Local card's port1 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.13 | Columnmc2200-GEmux8LocalPort1Mode | read-write | current | GEmux8 Local card's port1 Mode configuration, set INTEGER(1) to Auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.14 | Columnmc2200-GEmux8LocalPort1MDIX | read-write | current | GEmux8 Local card's port1 Mode configuration, set INTEGER(1) to Auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.15 | Columnmc2200-GEmux8LocalPort2Link | read-only | current | GEmux8 Local card's port2 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.16 | Columnmc2200-GEmux8LocalPort2Speed | read-only | current | GEmux8 Local card's port2 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.17 | Columnmc2200-GEmux8LocalPort2Duplex | read-only | current | GEmux8 Local card's port2 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.18 | Columnmc2200-GEmux8LocalPort2TxRate | read-write | current | GEmux8 Local card's port2 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.19 | Columnmc2200-GEmux8LocalPort2RxRate | read-write | current | GEmux8 Local card's port2 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.20 | Columnmc2200-GEmux8LocalPort2Mode | read-write | current | GEmux8 Local card's port2 Mode configuration, set INTEGER(1) to Auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.21 | Columnmc2200-GEmux8LocalPort2MDIX | read-write | current | GEmux8 Local card's port2 Mode configuration, set INTEGER(1) to Auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.22 | Columnmc2200-GEmux8LocalPort3Link | read-only | current | GEmux8 Local card's port3 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.23 | Columnmc2200-GEmux8LocalPort3Speed | read-only | current | GEmux8 Local card's port3 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.24 | Columnmc2200-GEmux8LocalPort3Duplex | read-only | current | GEmux8 Local card's port3 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.25 | Columnmc2200-GEmux8LocalPort3TxRate | read-write | current | GEmux8 Local card's port3 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.26 | Columnmc2200-GEmux8LocalPort3RxRate | read-write | current | GEmux8 Local card's port3 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.27 | Columnmc2200-GEmux8LocalPort3Mode | read-write | current | GEmux8 Local card's port3 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.28 | Columnmc2200-GEmux8LocalPort3MDIX | read-write | current | GEmux8 Local card's port3 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.29 | Columnmc2200-GEmux8LocalPort4Link | read-only | current | GEmux8 Local card's port4 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.30 | Columnmc2200-GEmux8LocalPort4Speed | read-only | current | GEmux8 Local card's port4 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.31 | Columnmc2200-GEmux8LocalPort4Duplex | read-only | current | GEmux8 Local card's port4 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.32 | Columnmc2200-GEmux8LocalPort4TxRate | read-write | current | GEmux8 Local card's port4 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.33 | Columnmc2200-GEmux8LocalPort4RxRate | read-write | current | GEmux8 Local card's port4 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.34 | Columnmc2200-GEmux8LocalPort4Mode | read-write | current | GEmux8 Local card's port4 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.35 | Columnmc2200-GEmux8LocalPort4MDIX | read-write | current | GEmux8 Local card's port4 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.36 | Columnmc2200-GEmux8LocalPort5Link | read-only | current | GEmux8 Local card's port5 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.37 | Columnmc2200-GEmux8LocalPort5Speed | read-only | current | GEmux8 Local card's port5 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.38 | Columnmc2200-GEmux8LocalPort5Duplex | read-only | current | GEmux8 Local card's port5 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.39 | Columnmc2200-GEmux8LocalPort5TxRate | read-write | current | GEmux8 Local card's port5 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.40 | Columnmc2200-GEmux8LocalPort5RxRate | read-write | current | GEmux8 Local card's port5 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.41 | Columnmc2200-GEmux8LocalPort5Mode | read-write | current | GEmux8 Local card's port5 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.42 | Columnmc2200-GEmux8LocalPort5MDIX | read-write | current | GEmux8 Local card's port5 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.43 | Columnmc2200-GEmux8LocalPort6Link | read-only | current | GEmux8 Local card's port6 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.44 | Columnmc2200-GEmux8LocalPort6Speed | read-only | current | GEmux8 Local card's port6 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.45 | Columnmc2200-GEmux8LocalPort6Duplex | read-only | current | GEmux8 Local card's port6 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.46 | Columnmc2200-GEmux8LocalPort6TxRate | read-write | current | GEmux8 Local card's port6 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.47 | Columnmc2200-GEmux8LocalPort6RxRate | read-write | current | GEmux8 Local card's port6 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.48 | Columnmc2200-GEmux8LocalPort6Mode | read-write | current | GEmux8 Local card's port6 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.49 | Columnmc2200-GEmux8LocalPort6MDIX | read-write | current | GEmux8 Local card's port6 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.50 | Columnmc2200-GEmux8LocalPort7Link | read-only | current | GEmux8 Local card's port7 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.51 | Columnmc2200-GEmux8LocalPort7Speed | read-only | current | GEmux8 Local card's port7 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.52 | Columnmc2200-GEmux8LocalPort7Duplex | read-only | current | GEmux8 Local card's port7 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.53 | Columnmc2200-GEmux8LocalPort7TxRate | read-write | current | GEmux8 Local card's port7 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.54 | Columnmc2200-GEmux8LocalPort7RxRate | read-write | current | GEmux8 Local card's port7 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.55 | Columnmc2200-GEmux8LocalPort7Mode | read-write | current | GEmux8 Local card's port7 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.56 | Columnmc2200-GEmux8LocalPort7MDIX | read-write | current | GEmux8 Local card's port7 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.57 | Columnmc2200-GEmux8LocalPort8Link | read-only | current | GEmux8 Local card's port8 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.58 | Columnmc2200-GEmux8LocalPort8Speed | read-only | current | GEmux8 Local card's port8 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.59 | Columnmc2200-GEmux8LocalPort8Duplex | read-only | current | GEmux8 Local card's port8 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.60 | Columnmc2200-GEmux8LocalPort8TxRate | read-write | current | GEmux8 Local card's port8 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.61 | Columnmc2200-GEmux8LocalPort8RxRate | read-write | current | GEmux8 Local card's port8 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.62 | Columnmc2200-GEmux8LocalPort8Mode | read-write | current | GEmux8 Local card's port8 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100MH… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.63 | Columnmc2200-GEmux8LocalPort8MDIX | read-write | current | GEmux8 Local card's port8 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.64 | Columnmc2200-GEmux8MibPort1RxGoodOctets | read-only | current | GEmux8 Local card's port1 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.66 | Columnmc2200-GEmux8MibPort1RxFCSErr | read-only | current | GEmux8 Local card's port1 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.67 | Columnmc2200-GEmux8MibPort1TxFCSErr | read-only | current | GEmux8 Local card's port1 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.68 | Columnmc2200-GEmux8MibPort2RxGoodOctets | read-only | current | GEmux8 Local card's port2 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.70 | Columnmc2200-GEmux8MibPort2RxFCSErr | read-only | current | GEmux8 Local card's port2 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.71 | Columnmc2200-GEmux8MibPort2TxFCSErr | read-only | current | GEmux8 Local card's port2 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.72 | Columnmc2200-GEmux8MibPort3RxGoodOctets | read-only | current | GEmux8 Local card's port3 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.74 | Columnmc2200-GEmux8MibPort3RxFCSErr | read-only | current | GEmux8 Local card's port3 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.75 | Columnmc2200-GEmux8MibPort3TxFCSErr | read-only | current | GEmux8 Local card's port3 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.76 | Columnmc2200-GEmux8MibPort4RxGoodOctets | read-only | current | GEmux8 Local card's port4 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.78 | Columnmc2200-GEmux8MibPort4RxFCSErr | read-only | current | GEmux8 Local card's port4 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.79 | Columnmc2200-GEmux8MibPort4TxFCSErr | read-only | current | GEmux8 Local card's port4 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.80 | Columnmc2200-GEmux8MibPort5RxGoodOctets | read-only | current | GEmux8 Local card's port5 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.82 | Columnmc2200-GEmux8MibPort5RxFCSErr | read-only | current | GEmux8 Local card's port5 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.83 | Columnmc2200-GEmux8MibPort5TxFCSErr | read-only | current | GEmux8 Local card's port5 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.84 | Columnmc2200-GEmux8MibPort6RxGoodOctets | read-only | current | GEmux8 Local card's port6 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.86 | Columnmc2200-GEmux8MibPort6RxFCSErr | read-only | current | GEmux8 Local card's port6 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.87 | Columnmc2200-GEmux8MibPort6TxFCSErr | read-only | current | GEmux8 Local card's port6 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.88 | Columnmc2200-GEmux8MibPort7RxGoodOctets | read-only | current | GEmux8 Local card's port7 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.90 | Columnmc2200-GEmux8MibPort7RxFCSErr | read-only | current | GEmux8 Local card's port7 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.91 | Columnmc2200-GEmux8MibPort7TxFCSErr | read-only | current | GEmux8 Local card's port7 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.92 | Columnmc2200-GEmux8MibPort8RxGoodOctets | read-only | current | GEmux8 Local card's port8 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.94 | Columnmc2200-GEmux8MibPort8RxFCSErr | read-only | current | GEmux8 Local card's port8 MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.95 | Columnmc2200-GEmux8MibPort8TxFCSErr | read-only | current | GEmux8 Local card's port8 MIB RxGoodOctetsLo counter. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.96 | Columnmc2200-GEmux8RemoteLANSFPInfo | read-only | current | GEmux8 Remote card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.97 | Columnmc2200-GEmux8RemoteLANLink | read-only | mandatory | GEmux8 Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.98 | Columnmc2200-GEmux8RemoteWANSFPInfo | read-only | current | GEmux8 Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.99 | Columnmc2200-GEmux8RemoteWANLink | read-only | current | GEmux8 Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.100 | Columnmc2200-GEmux8RemotePort1Link | read-only | current | GEmux8 Remote card's port1 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.101 | Columnmc2200-GEmux8RemotePort1Speed | read-only | current | GEmux8 Remote card's port1 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.102 | Columnmc2200-GEmux8RemotePort1Duplex | read-only | current | GEmux8 Remote card's port1 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.103 | Columnmc2200-GEmux8RemotePort1Mode | read-write | current | GEmux8 Remote card's port1 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.104 | Columnmc2200-GEmux8RemotePort1MDIX | read-write | current | GEmux8 Remote card's port1 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.105 | Columnmc2200-GEmux8RemotePort2Link | read-only | current | GEmux8 Remote card's port2 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.106 | Columnmc2200-GEmux8RemotePort2Speed | read-only | current | GEmux8 Remote card's port2 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.107 | Columnmc2200-GEmux8RemotePort2Duplex | read-only | current | GEmux8 Remote card's port2 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.108 | Columnmc2200-GEmux8RemotePort2Mode | read-write | current | GEmux8 Remote card's port2 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.109 | Columnmc2200-GEmux8RemotePort2MDIX | read-write | current | GEmux8 Remote card's port2 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.110 | Columnmc2200-GEmux8RemotePort3Link | read-only | current | GEmux8 Remote card's port3 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.111 | Columnmc2200-GEmux8RemotePort3Speed | read-only | current | GEmux8 Remote card's port3 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.112 | Columnmc2200-GEmux8RemotePort3Duplex | read-only | current | GEmux8 Remote card's port3 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.113 | Columnmc2200-GEmux8RemotePort3Mode | read-write | current | GEmux8 Remote card's port3 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.114 | Columnmc2200-GEmux8RemotePort3MDIX | read-write | current | GEmux8 Remote card's port3 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.115 | Columnmc2200-GEmux8RemotePort4Link | read-only | current | GEmux8 Remote card's port4 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.116 | Columnmc2200-GEmux8RemotePort4Speed | read-only | current | GEmux8 Remote card's port4 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.117 | Columnmc2200-GEmux8RemotePort4Duplex | read-only | current | GEmux8 Remote card's port4 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.118 | Columnmc2200-GEmux8RemotePort4Mode | read-write | current | GEmux8 Remote card's port4 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.119 | Columnmc2200-GEmux8RemotePort4MDIX | read-write | current | GEmux8 Remote card's port4 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.120 | Columnmc2200-GEmux8RemotePort5Link | read-only | current | GEmux8 Remote card's port5 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.121 | Columnmc2200-GEmux8RemotePort5Speed | read-only | current | GEmux8 Remote card's port5 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.122 | Columnmc2200-GEmux8RemotePort5Duplex | read-only | current | GEmux8 Remote card's port5 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.123 | Columnmc2200-GEmux8RemotePort5Mode | read-write | current | GEmux8 Remote card's port5 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.124 | Columnmc2200-GEmux8RemotePort5MDIX | read-write | current | GEmux8 Remote card's port5 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.125 | Columnmc2200-GEmux8RemotePort6Link | read-only | current | GEmux8 Remote card's port6 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.126 | Columnmc2200-GEmux8RemotePort6Speed | read-only | current | GEmux8 Remote card's port6 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.127 | Columnmc2200-GEmux8RemotePort6Duplex | read-only | current | GEmux8 Remote card's port6 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.128 | Columnmc2200-GEmux8RemotePort6Mode | read-write | current | GEmux8 Remote card's port6 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.129 | Columnmc2200-GEmux8RemotePort6MDIX | read-write | current | GEmux8 Remote card's port6 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.130 | Columnmc2200-GEmux8RemotePort7Link | read-only | current | GEmux8 Remote card's port7 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.131 | Columnmc2200-GEmux8RemotePort7Speed | read-only | current | GEmux8 Remote card's port7 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.132 | Columnmc2200-GEmux8RemotePort7Duplex | read-only | current | GEmux8 Remote card's port7 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.133 | Columnmc2200-GEmux8RemotePort7Mode | read-write | current | GEmux8 Remote card's port7 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.134 | Columnmc2200-GEmux8RemotePort7MDIX | read-write | current | GEmux8 Remote card's port7 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.135 | Columnmc2200-GEmux8RemotePort8Link | read-only | current | GEmux8 Remote card's port8 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.136 | Columnmc2200-GEmux8RemotePort8Speed | read-only | current | GEmux8 Remote card's port8 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.137 | Columnmc2200-GEmux8RemotePort8Duplex | read-only | current | GEmux8 Remote card's port8 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.138 | Columnmc2200-GEmux8RemotePort8Mode | read-write | current | GEmux8 Remote card's port8 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.139 | Columnmc2200-GEmux8RemotePort8MDIX | read-write | current | GEmux8 Remote card's port8 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDI-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.1.1.140 | Columnmc2200-GEmux8RemoteIPAddress | read-write | mandatory | The IP address to GEmux8 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.141 | Columnmc2200-GEmux8RemoteSubnetMask | read-write | mandatory | The Net mask to GEmux8 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.142 | Columnmc2200-GEmux8RemoteGateWay | read-write | mandatory | The gateware to GEmux8 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.143 | Columnmc2200-GEmux8RemoteVLANEnable | read-write | mandatory | Enable or disable Remote GEmux8 IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.144 | Columnmc2200-GEmux8RemoteVID | read-write | mandatory | GEmux8 Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.145 | Columnmc2200-GEmux8RemoteAlarm | read-write | current | Enable or disable GEmux8 Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is inval… |
| 1.3.6.1.4.1.28350.4.1.3.1.1.146 | Columnmc2200-GEmux8RFD | read-write | current | GEmux8 Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.147 | Columnmc2200-GEmux8Default | write-only | current | Write GEmux8 card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.148 | Columnmc2200-GEmux8Reboot | write-only | current | Reboot GEmux8 local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.149 | Columnmc2200-GEmux8LocalCardREMOTEMODE | read-write | current | GEmux8 local card Remote Mode,if Remote mode is enabled, the control of this converter is assigned to another remote management platform. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.150 | Columnmc2200-GEmux8Localportuser1 | read-write | current | User of GEmux8 Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.151 | Columnmc2200-GEmux8Localportuser2 | read-write | current | User of GEmux8 Local Port2. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.152 | Columnmc2200-GEmux8Localportuser3 | read-write | current | User of GEmux8 Local Port3. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.153 | Columnmc2200-GEmux8Localportuser4 | read-write | current | User of GEmux8 Local Port4. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.154 | Columnmc2200-GEmux8Localportuser5 | read-write | current | User of GEmux8 Local Port5. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.155 | Columnmc2200-GEmux8Localportuser6 | read-write | current | User of GEmux8 Local Port6. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.156 | Columnmc2200-GEmux8Localportuser7 | read-write | current | User of GEmux8 Local Port7. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.157 | Columnmc2200-GEmux8Localportuser8 | read-write | current | User of GEmux8 Local Port8. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.158 | Columnmc2200-GEmux8Remoteportuser1 | read-write | current | User of GEmux8 Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.159 | Columnmc2200-GEmux8Remoteportuser2 | read-write | current | User of GEmux8 Remote Port2. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.160 | Columnmc2200-GEmux8Remoteportuser3 | read-write | current | User of GEmux8 Remote Port3. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.161 | Columnmc2200-GEmux8Remoteportuser4 | read-write | current | User of GEmux8 Remote Port4. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.162 | Columnmc2200-GEmux8Remoteportuser5 | read-write | current | User of GEmux8 Remote Port5. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.163 | Columnmc2200-GEmux8Remoteportuser6 | read-write | current | User of GEmux8 Remote Port6. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.164 | Columnmc2200-GEmux8Remoteportuser7 | read-write | current | User of GEmux8 Remote Port7. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.165 | Columnmc2200-GEmux8Remoteportuser8 | read-write | current | User of GEmux8 Remote Port8. |
| 1.3.6.1.4.1.28350.4.1.3.1.1.166 | Columnmc2200-GEmux8TrapFilterLocalLAN | read-write | current | Local LAN of GEmux8 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.1.1.167 | Columnmc2200-GEmux8TrapFilterLocalWAN | read-write | current | Local WAN of GEmux8 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.1.1.168 | Columnmc2200-GEmux8TrapFilterRemotePower | read-write | current | Remote Power of GEmux8 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.1.1.169 | Columnmc2200-GEmux8TrapFilterRemoteLAN | read-write | current | Remote LAN of GEmux8 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.1.1.170 | Columnmc2200-GEmux8TrapFilterRemoteWAN | read-write | current | Remote WAN of GEmux8 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.5 | Tablemc2200-GEMC4Table | not-accessible | current | Sparse table containing one entry for each GEMC4 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.5.1 | Rowmc2200-GEMC4Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GEMC4 media converter, then entry 'n' in this table exists and… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.1 | Columnmc2200-GEMC4CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.5.1.2 | Columnmc2200-GEMC4CardMode | read-write | mandatory | GEMC4 Card Mode: (GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) |
| 1.3.6.1.4.1.28350.4.1.3.5.1.3 | Columnmc2200-GEMC4LocalLAN1SFPInfo | read-only | current | GE-MC2/2-STD Local card's LAN1 port SFP infomation. GE-MC2/2-APS Local card's LAN1 port SFP infomation. GE-MC1/2-APS Local card's LAN1 port SFP infomation. GE-… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.4 | Columnmc2200-GEMC4LocalLAN1Link | read-only | mandatory | GE-MC2/2-STD Local card's LAN1 port work link status. GE-MC2/2-APS Local card's LAN1 port work link status. GE-MC1/2-APS Local card's LAN1 port work link statu… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.5 | Columnmc2200-GEMC4LocalLAN2SFPInfo | read-only | current | GE-MC2/2-STD Local card's LAN2 port SFP infomation. GE-MC2/2-APS Local card's LAN2 port SFP infomation. GE-MC3/1-MUX Local card's LAN2 port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.6 | Columnmc2200-GEMC4LocalLAN2Link | read-only | mandatory | GE-MC2/2-STD Local card's LAN2 port work link status. GE-MC2/2-APS Local card's LAN2 port work link status. GE-MC3/1-MUX Local card's LAN2 port work link statu… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.7 | Columnmc2200-GEMC4LocalWAN1SFPInfo | read-only | current | GE-MC2/2-STD Local card's WAN1 port SFP infomation. GE-MC2/2-APS Local card's WAN1 port SFP infomation. GE-MC1/2-APS Local card's WAN1 port SFP infomation. GE-… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.8 | Columnmc2200-GEMC4LocalWAN1Link | read-only | mandatory | GE-MC2/2-STD Local card's WAN1 port work link status. GE-MC2/2-APS Local card's WAN1 port work link status. GE-MC1/2-APS Local card's WAN1 port work link statu… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.9 | Columnmc2200-GEMC4LocalWAN2LAN3SFPInfo | read-only | current | GE-MC2/2-STD Local card's WAN2 port SFP infomation. GE-MC2/2-APS Local card's WAN2 port SFP infomation. GE-MC1/2-APS Local card's WAN2 port SFP infomation. GE-… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.10 | Columnmc2200-GEMC4LocalWAN2LAN3Link | read-only | mandatory | GE-MC2/2-STD Local card's WAN2LAN3 port work link status. GE-MC2/2-APS Local card's WAN2LAN3 port work link status. GE-MC1/2-APS Local card's WAN2LAN3 port wor… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.11 | Columnmc2200-GEMC4LocalLAN1DownStreamBW | read-write | current | GE-MC2/2-STD Local card's LAN1 port DownStream BandWidth. GE-MC2/2-APS Local card's LAN1 port DownStream BandWidth. GE-MC1/2-APS Local card's LAN1 port DownStr… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.12 | Columnmc2200-GEMC4LocalLAN1UpStreamBW | read-write | current | GE-MC2/2-STD Local card's LAN1 port UpStream BandWidth. GE-MC2/2-APS Local card's LAN1 port UpStream BandWidth. GE-MC1/2-APS Local card's LAN1 port UpStream Ba… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.13 | Columnmc2200-GEMC4LocalLAN2DownStreamBW | read-write | current | GE-MC2/2-STD Local card's LAN2 port DownStream BandWidth. GE-MC2/2-APS Local card's LAN2 port DownStream BandWidth. GE-MC3/1-MUX Local card's LAN2 port DownStr… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.14 | Columnmc2200-GEMC4LocalLAN2UpStreamBW | read-write | current | GE-MC2/2-STD Local card's LAN2 port UpStream BandWidth. GE-MC2/2-APS Local card's LAN2 port UpStream BandWidth. GE-MC3/1-MUX Local card's LAN2 port UpStream Ba… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.15 | Columnmc2200-GEMC4LocalLAN3DownStreamBW | read-write | current | GE-MC3/1-MUX Local card's LAN3 port UpStream BandWidth, Other GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS) no this item. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.16 | Columnmc2200-GEMC4LocalLAN3UpStreamBW | read-write | current | GE-MC3/1-MUX Local card's LAN3 port UpStream BandWidth. Other GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS) no this item. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.17 | Columnmc2200-GEMC4LocalLAN1Mode | read-write | current | GEMC4 GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX Local card's LAN1 port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to 10… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.18 | Columnmc2200-GEMC4LocalLAN2Mode | read-write | current | GEMC4 GE-MC2/2-STD,GE-MC2/2-APS,GE-MC3/1-MUX Local card's LAN2 port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to 1000Base-X(auto… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.19 | Columnmc2200-GEMC4LocalLAN3Mode | read-write | current | GEMC4 GE-MC3/1-MUX Local card's LAN3 port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to 1000Base-X(auto), set INTEGER(3) to 1000B… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.20 | Columnmc2200-GEMC4MibCounter1 | read-only | current | GEMC4 MibCounter1: GE-MC2/2-STD local LAN1 port MIB RxLoGoodByte counter. GE-MC2/2-APS local LAN1 port MIB RxLoGoodByte counter. GE-MC1/2-APS local LAN1 port M… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.21 | Columnmc2200-GEMC4MibCounter2 | read-only | current | GEMC4 MibCounter2: GE-MC2/2-STD local LAN1 port MIB RxHiGoodByte counter. GE-MC2/2-APS local LAN1 port MIB RxHiGoodByte counter. GE-MC1/2-APS local LAN1 port M… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.22 | Columnmc2200-GEMC4MibCounter3 | read-only | current | GEMC4 MibCounter3: GE-MC2/2-STD local LAN1 port MIB RxBadByte counter. GE-MC2/2-APS local LAN1 port MIB RxBadByte counter. GE-MC1/2-APS local LAN1 port MIB RxB… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.23 | Columnmc2200-GEMC4MibCounter4 | read-only | current | GEMC4 MibCounter4: GE-MC2/2-STD local LAN1 port MIB RxUnicastPkts counter. GE-MC2/2-APS local LAN1 port MIB RxUnicastPkts counter. GE-MC1/2-APS local LAN1 port… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.24 | Columnmc2200-GEMC4MibCounter5 | read-only | current | GEMC4 MibCounter5: GE-MC2/2-STD local LAN1 port MIB RxBroadcastPkts counter. GE-MC2/2-APS local LAN1 port MIB RxBroadcastPkts counter. GE-MC1/2-APS local LAN1 … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.25 | Columnmc2200-GEMC4MibCounter6 | read-only | current | GEMC4 MibCounter6: GE-MC2/2-STD local LAN1 port MIB RxMulticastPkts counter. GE-MC2/2-APS local LAN1 port MIB RxMulticastPkts counter. GE-MC1/2-APS local LAN1 … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.26 | Columnmc2200-GEMC4MibCounter7 | read-only | current | GEMC4 MibCounter7: GE-MC2/2-STD local LAN1 port MIB TxLoGoodByte counter. GE-MC2/2-APS local LAN1 port MIB TxLoGoodByte counter. GE-MC1/2-APS local LAN1 port M… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.27 | Columnmc2200-GEMC4MibCounter8 | read-only | current | GEMC4 MibCounter8: GE-MC2/2-STD local LAN1 port MIB TxHiGoodByte counter. GE-MC2/2-APS local LAN1 port MIB TxHiGoodByte counter. GE-MC1/2-APS local LAN1 port M… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.28 | Columnmc2200-GEMC4MibCounter9 | read-only | current | GEMC4 MibCounter9: GE-MC2/2-STD local LAN1 port MIB TxUnicastPkts counter. GE-MC2/2-APS local LAN1 port MIB TxUnicastPkts counter. GE-MC1/2-APS local LAN1 port… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.29 | Columnmc2200-GEMC4MibCounter10 | read-only | current | GEMC4 MibCounter10: GE-MC2/2-STD local LAN1 port MIB TxMulticastPkts counter. GE-MC2/2-APS local LAN1 port MIB TxMulticastPkts counter. GE-MC1/2-APS local LAN1… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.30 | Columnmc2200-GEMC4MibCounter11 | read-only | current | GEMC4 MibCounter11: GE-MC2/2-STD local LAN1 port MIB TxBroadcastPkts counter. GE-MC2/2-APS local LAN1 port MIB TxBroadcastPkts counter. GE-MC1/2-APS local LAN1… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.31 | Columnmc2200-GEMC4MibCounter12 | read-only | current | GEMC4 MibCounter12: GE-MC2/2-STD local LAN1 port MIB TxFC counter. GE-MC2/2-APS local LAN1 port MIB TxFC counter. GE-MC1/2-APS local LAN1 port MIB Rx256to511Oc… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.32 | Columnmc2200-GEMC4MibCounter13 | read-only | current | GEMC4 MibCounter13: GE-MC2/2-STD local LAN1 port MIB RxFC counter. GE-MC2/2-APS local LAN1 port MIB RxFC counter. GE-MC1/2-APS local LAN1 port MIB Rx512to1023O… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.33 | Columnmc2200-GEMC4MibCounter14 | read-only | current | GEMC4 MibCounter14: GE-MC2/2-STD local LAN1 port MIB RxUndersize counter. GE-MC2/2-APS local LAN1 port MIB RxUndersize counter. GE-MC1/2-APS local LAN1 port MI… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.34 | Columnmc2200-GEMC4MibCounter15 | read-only | current | GEMC4 MibCounter15: GE-MC2/2-STD local LAN1 port MIB RxOversize counter. GE-MC2/2-APS local LAN1 port MIB RxOversize counter. GE-MC1/2-APS local LAN1 port MIB … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.35 | Columnmc2200-GEMC4MibCounter16 | read-only | current | GEMC4 MibCounter16: GE-MC2/2-STD local LAN1 port MIB RxBadCRC counter. GE-MC2/2-APS local LAN1 port MIB RxBadCRC counter. GE-MC1/2-APS local LAN1 port MIB TxOc… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.36 | Columnmc2200-GEMC4MibCounter17 | read-only | current | GEMC4 MibCounter17: GE-MC2/2-STD local LAN2 port MIB RxLoGoodByte counter. GE-MC2/2-APS local LAN2 port MIB RxLoGoodByte counter. GE-MC1/2-APS local LAN1 port … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.37 | Columnmc2200-GEMC4MibCounter18 | read-only | current | GEMC4 MibCounter18: GE-MC2/2-STD local LAN2 port MIB RxHiGoodByte counter. GE-MC2/2-APS local LAN2 port MIB RxHiGoodByte counter. GE-MC1/2-APS local LAN1 port … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.38 | Columnmc2200-GEMC4MibCounter19 | read-only | current | GEMC4 MibCounter19: GE-MC2/2-STD local LAN2 port MIB RxBadByte counter. GE-MC2/2-APS local LAN2 port MIB RxBadByte counter. GE-MC1/2-APS local LAN1 port MIB Tx… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.39 | Columnmc2200-GEMC4MibCounter20 | read-only | current | GEMC4 MibCounter20: GE-MC2/2-STD local LAN2 port MIB RxUnicastPkts counter. GE-MC2/2-APS local LAN2 port MIB RxUnicastPkts counter. GE-MC1/2-APS local LAN1 por… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.40 | Columnmc2200-GEMC4MibCounter21 | read-only | current | GEMC4 MibCounter21: GE-MC2/2-STD local LAN2 port MIB RxBroadcastPkts counter. GE-MC2/2-APS local LAN2 port MIB RxBroadcastPkts counter. GE-MC1/2-APS local LAN1… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.41 | Columnmc2200-GEMC4MibCounter22 | read-only | current | GEMC4 MibCounter22: GE-MC2/2-STD local LAN2 port MIB RxMulticastPkts counter. GE-MC2/2-APS local LAN2 port MIB RxMulticastPkts counter. GE-MC1/2-APS local LAN1… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.42 | Columnmc2200-GEMC4MibCounter23 | read-only | current | GEMC4 MibCounter23: GE-MC2/2-STD local LAN2 port MIB RxFCSErr counter. GE-MC2/2-APS local LAN2 port MIB RxFCSErr counter. GE-MC1/2-APS local LAN1 port MIB RxPa… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.43 | Columnmc2200-GEMC4MibCounter24 | read-only | current | GEMC4 MibCounter24: GE-MC2/2-STD local LAN2 port MIB TxLoGoodByte counter. GE-MC2/2-APS local LAN2 port MIB TxLoGoodByte counter. GE-MC1/2-APS local LAN1 port … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.44 | Columnmc2200-GEMC4MibCounter25 | read-only | current | GEMC4 MibCounter25: GE-MC2/2-STD local LAN2 port MIB TxUnicastPkts counter. GE-MC2/2-APS local LAN2 port MIB TxUnicastPkts counter. GE-MC1/2-APS local LAN1 por… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.45 | Columnmc2200-GEMC4MibCounter26 | read-only | current | GEMC4 MibCounter26: GE-MC2/2-STD local LAN2 port MIB TxMulticastPkts counter. GE-MC2/2-APS local LAN2 port MIB TxMulticastPkts counter. GE-MC1/2-APS local LAN1… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.46 | Columnmc2200-GEMC4MibCounter27 | read-only | current | GEMC4 MibCounter27: GE-MC2/2-STD local LAN2 port MIB TxBroadcastPkts counter. GE-MC2/2-APS local LAN2 port MIB TxBroadcastPkts counter. GE-MC1/2-APS local LAN1… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.47 | Columnmc2200-GEMC4MibCounter28 | read-only | current | GEMC4 MibCounter28: GE-MC2/2-STD local LAN2 port MIB TxFC counter. GE-MC2/2-APS local LAN2 port MIB TxFC counter. GE-MC1/2-APS local LAN1 port MIB RxJabber cou… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.48 | Columnmc2200-GEMC4MibCounter29 | read-only | current | GEMC4 MibCounter29: GE-MC2/2-STD local LAN2 port MIB RxFC counter. GE-MC2/2-APS local LAN2 port MIB RxFC counter. GE-MC1/2-APS local LAN1 port MIB RxErr counte… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.49 | Columnmc2200-GEMC4MibCounter30 | read-only | current | GEMC4 MibCounter30: GE-MC2/2-STD local LAN2 port MIB RxUndersize counter. GE-MC2/2-APS local LAN2 port MIB RxUndersize counter. GE-MC1/2-APS local LAN1 port MI… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.50 | Columnmc2200-GEMC4MibCounter31 | read-only | current | GEMC4 MibCounter31: GE-MC2/2-STD local LAN2 port MIB RxOversize counter. GE-MC2/2-APS local LAN2 port MIB RxOversize counter. GE-MC1/2-APS local LAN1 port MIB … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.51 | Columnmc2200-GEMC4MibCounter32 | read-only | current | GEMC4 MibCounter32: GE-MC2/2-STD local LAN2 port MIB RxBadCRC counter. GE-MC2/2-APS local LAN2 port MIB RxBadCRC counter. GE-MC1/2-APS local LAN1 port MIB TxLa… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.52 | Columnmc2200-GEMC4RemoteLAN1SFPInfo | read-only | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's LAN1 port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.53 | Columnmc2200-GEMC4RemoteLAN1Link | read-only | mandatory | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's LAN1 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.54 | Columnmc2200-GEMC4RemoteLAN2SFPInfo | read-only | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC3/1-MUX) Remote card's LAN2 port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.55 | Columnmc2200-GEMC4RemoteLAN2Link | read-only | mandatory | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC3/1-MUX) Remote card's LAN2 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.56 | Columnmc2200-GEMC4RemoteWAN1SFPInfo | read-only | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.57 | Columnmc2200-GEMC4RemoteWAN1Link | read-only | mandatory | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.58 | Columnmc2200-GEMC4RemoteWAN2LAN3SFPInfo | read-only | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's WAN2/LAN3 port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.59 | Columnmc2200-GEMC4RemoteWAN2LAN3Link | read-only | mandatory | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's LAN3 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.60 | Columnmc2200-GEMC4RemoteLAN1Mode | read-write | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote card's LAN1 port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.61 | Columnmc2200-GEMC4RemoteLAN2Mode | read-write | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC3/1-MUX) Remote card's LAN2 port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to 1000Base-X(au… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.62 | Columnmc2200-GEMC4RemoteLAN3Mode | read-write | current | GEMC4(GE-MC3/1-MUX) Remote card's LAN3 port Mode configuration, Other GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS) no this item. set INTEGER(1) to auto(10/100… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.63 | Columnmc2200-GEMC4RemoteIPAddress | read-write | mandatory | The IP address to GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.64 | Columnmc2200-GEMC4RemoteSubnetMask | read-write | mandatory | The Net mask to GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.65 | Columnmc2200-GEMC4RemoteGateWay | read-write | mandatory | The gateware to GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.66 | Columnmc2200-GEMC4RemoteVLANEnable | read-write | mandatory | Enable or disable Remote GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.67 | Columnmc2200-GEMC4RemoteVID | read-write | mandatory | GEMC4 Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.68 | Columnmc2200-GEMC4RemoteAlarm | read-write | current | Enable or disable GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTE… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.69 | Columnmc2200-GEMC4RFD | read-write | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to … |
| 1.3.6.1.4.1.28350.4.1.3.5.1.70 | Columnmc2200-GEMC4Default | write-only | current | Write GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.71 | Columnmc2200-GEMC4Reboot | write-only | current | Reboot GEMC4 local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.72 | Columnmc2200-GEMC4LocalCardREMOTEMODE | read-write | current | GEMC4(GE-MC2/2-STD,GE-MC2/2-APS,GE-MC1/2-APS,GE-MC3/1-MUX) local card Remote Mode,if Remote mode is enabled, the control of this converter is assigned to anoth… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.73 | Columnmc2200-GEMC4LocalLAN1Speed | read-only | mandatory | GE-MC2/2-STD Local card's LAN1 port work speed status. GE-MC2/2-APS Local card's LAN1 port work speed status. GE-MC1/2-APS Local card's LAN1 port work speed st… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.74 | Columnmc2200-GEMC4LocalLAN2Speed | read-only | mandatory | GE-MC2/2-STD Local card's LAN2 port work speed status. GE-MC2/2-APS Local card's LAN2 port work speed status. GE-MC1/2-APS Local card's LAN2 port work speed st… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.75 | Columnmc2200-GEMC4LocalWAN2LAN3Speed | read-only | mandatory | GE-MC2/2-STD Local card's WAN2LAN3 port work speed status. GE-MC2/2-APS Local card's WAN2LAN3 port work speed status. GE-MC1/2-APS Local card's WAN2LAN3 port w… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.76 | Columnmc2200-GEMC4RemoteLAN1Speed | read-only | mandatory | GE-MC2/2-STD Remote card's LAN1 port work speed status. GE-MC2/2-APS Remote card's LAN1 port work speed status. GE-MC1/2-APS Remote card's LAN1 port work speed… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.77 | Columnmc2200-GEMC4RemoteLAN2Speed | read-only | mandatory | GE-MC2/2-STD Remote card's LAN2 port work speed status. GE-MC2/2-APS Remote card's LAN2 port work speed status. GE-MC1/2-APS Remote card's LAN2 port work speed… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.78 | Columnmc2200-GEMC4RemoteWAN2LAN3Speed | read-only | mandatory | GE-MC2/2-STD Remote card's WAN2LAN3 port work speed status. GE-MC2/2-APS Remote card's WAN2LAN3 port work speed status. GE-MC1/2-APS Remote card's WAN2LAN3 por… |
| 1.3.6.1.4.1.28350.4.1.3.5.1.79 | Columnmc2200-GEMC4APSActivePort | read-write | current | GEMC4(GE-MC1-2-APS) APS Active Port setting. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.80 | Columnmc2200-GEMC4Localportuser1 | read-write | current | User of GE-MC4 Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.81 | Columnmc2200-GEMC4Localportuser2 | read-write | current | User of GE-MC4 Local Port2. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.82 | Columnmc2200-GEMC4Localportuser3 | read-write | current | User of GE-MC4 Local Port3. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.83 | Columnmc2200-GEMC4Remoteportuser1 | read-write | current | User of GE-MC4 Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.84 | Columnmc2200-GEMC4Remoteportuser2 | read-write | current | User of GE-MC4 Remote Port2. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.85 | Columnmc2200-GEMC4Remoteportuser3 | read-write | current | User of GE-MC4 Remote Port3. |
| 1.3.6.1.4.1.28350.4.1.3.5.1.86 | Columnmc2200-GEMC4TrapFilterLocalLAN | read-write | current | Local LAN of GEMC4 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.5.1.87 | Columnmc2200-GEMC4TrapFilterLocalWAN | read-write | current | Local WAN of GEMC4 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.5.1.88 | Columnmc2200-GEMC4TrapFilterRemotePower | read-write | current | Remote Power of GEMC4 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.5.1.89 | Columnmc2200-GEMC4TrapFilterRemoteLAN | read-write | current | Remote LAN of GEMC4 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.5.1.90 | Columnmc2200-GEMC4TrapFilterRemoteWAN | read-write | current | Remote WAN of GEMC4 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.6 | Tablemc2200-GEMC2Table | not-accessible | current | Sparse table containing one entry for each GEMC2 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.6.1 | Rowmc2200-GEMC2Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GEMC2 media converter, then entry 'n' in this table exists and… |
| 1.3.6.1.4.1.28350.4.1.3.6.1.2 | Columnmc2200-GEMC2CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.6.1.3 | Columnmc2200-GEMC2LocalLANSFPInfo | read-only | current | GEMC2 Local card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.4 | Columnmc2200-GEMC2LocalLANLink | read-only | mandatory | GEMC2 Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.5 | Columnmc2200-GEMC2LocalWANSFPInfo | read-only | current | GEMC2 Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.6 | Columnmc2200-GEMC2LocalWANLink | read-only | current | GEMC2 Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.7 | Columnmc2200-GEMC2LocalLANDownStreamBW | read-write | current | GEMC2 Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.8 | Columnmc2200-GEMC2LocalLANUpStreamBW | read-write | current | GEMC2 Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.9 | Columnmc2200-GEMC2LocalLANMode | read-write | current | GEMC2 Local card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to 1000Base-X(auto), set INTEGER(3) to 1000Base-T, set INT… |
| 1.3.6.1.4.1.28350.4.1.3.6.1.10 | Columnmc2200-GEMC2RxGoodOctets | read-only | current | GEMC2 Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.12 | Columnmc2200-GEMC2RxBadOctets | read-only | current | GEMC2 Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.13 | Columnmc2200-GEMC2TxFCSErr | read-only | current | GEMC2 Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.14 | Columnmc2200-GEMC2RxUnicast | read-only | current | GEMC2 Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.15 | Columnmc2200-GEMC2TxDeferred | read-only | current | GEMC2 Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.16 | Columnmc2200-GEMC2RxBroadcasts | read-only | current | GEMC2 Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.17 | Columnmc2200-GEMC2RxMulticasts | read-only | current | GEMC2 Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.18 | Columnmc2200-GEMC2Rx64Octets | read-only | current | GEMC2 Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.19 | Columnmc2200-GEMC2Rx65to127Octets | read-only | current | GEMC2 Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.20 | Columnmc2200-GEMC2Rx128to255Octets | read-only | current | GEMC2 Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.21 | Columnmc2200-GEMC2Rx256to511Octets | read-only | current | GEMC2 Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.22 | Columnmc2200-GEMC2Rx512to1023Octets | read-only | current | GEMC2 Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.23 | Columnmc2200-GEMC2Rx1024toMaxOctets | read-only | current | GEMC2 Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.24 | Columnmc2200-GEMC2TxOctets | read-only | current | GEMC2 Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.26 | Columnmc2200-GEMC2TxUnicast | read-only | current | GEMC2 Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.27 | Columnmc2200-GEMC2TxExcessive | read-only | current | GEMC2 Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.28 | Columnmc2200-GEMC2TxMulticasts | read-only | current | GEMC2 Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.29 | Columnmc2200-GEMC2TxBroadcasts | read-only | current | GEMC2 Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.30 | Columnmc2200-GEMC2TxSingle | read-only | current | GEMC2 Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.31 | Columnmc2200-GEMC2TxPause | read-only | current | GEMC2 Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.32 | Columnmc2200-GEMC2RxPause | read-only | current | GEMC2 Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.33 | Columnmc2200-GEMC2TxMultiple | read-only | current | GEMC2 Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.34 | Columnmc2200-GEMC2RxUndersize | read-only | current | GEMC2 Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.35 | Columnmc2200-GEMC2RxFragments | read-only | current | GEMC2 Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.36 | Columnmc2200-GEMC2RxOversize | read-only | current | GEMC2 Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.37 | Columnmc2200-GEMC2RxJabber | read-only | current | GEMC2 Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.38 | Columnmc2200-GEMC2RxErr | read-only | current | GEMC2 Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.39 | Columnmc2200-GEMC2RxFCSErr | read-only | current | GEMC2 Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.40 | Columnmc2200-GEMC2TxCollisions | read-only | current | GEMC2 Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.41 | Columnmc2200-GEMC2TxLate | read-only | current | GEMC2 Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.42 | Columnmc2200-GEMC2RemoteLANSFPInfo | read-only | current | GEMC2 Remote card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.43 | Columnmc2200-GEMC2RemoteLANLink | read-only | mandatory | GEMC2 Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.44 | Columnmc2200-GEMC2RemoteWANSFPInfo | read-only | current | GEMC2 Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.45 | Columnmc2200-GEMC2RemoteWANLink | read-only | current | GEMC2 Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.46 | Columnmc2200-GEMC2RemoteLANMode | read-write | current | GEMC2 Remote card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000T), set INTEGER(2) to 1000Base-X(auto), set INTEGER(3) to 1000Base-T, set IN… |
| 1.3.6.1.4.1.28350.4.1.3.6.1.47 | Columnmc2200-GEMC2RemoteIPAddress | read-write | mandatory | The IP address to GEMC2 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.48 | Columnmc2200-GEMC2RemoteSubnetMask | read-write | mandatory | The Net mask to GEMC2 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.49 | Columnmc2200-GEMC2RemoteGateWay | read-write | mandatory | The gateware to GEMC2 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.50 | Columnmc2200-GEMC2RemoteVLANEnable | read-write | mandatory | Enable or disable Remote GEMC2 IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.51 | Columnmc2200-GEMC2RemoteVID | read-write | mandatory | GEMC2 Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.52 | Columnmc2200-GEMC2RemoteAlarm | read-write | current | Enable or disable GEMC2 Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is invali… |
| 1.3.6.1.4.1.28350.4.1.3.6.1.53 | Columnmc2200-GEMC2RFD | read-write | current | GEMC2 Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.54 | Columnmc2200-GEMC2Default | write-only | current | Write GEMC2 card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.55 | Columnmc2200-GEMC2Reboot | write-only | current | Reboot GEMC2 local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.56 | Columnmc2200-GEMC2LocalCardREMOTEMODE | read-write | current | GEMC2 local card Remote Mode,if Remote mode is enabled, the control of this converter is assigned to another remote management platform. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.57 | Columnmc2200-GEMC2LocalLANSpeed | read-only | mandatory | GE-MC2 Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.58 | Columnmc2200-GEMC2RemoteLANSpeed | read-only | mandatory | GE-MC2 Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.59 | Columnmc2200-GEMC2Localportuser | read-write | current | User of GE-MC2 Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.60 | Columnmc2200-GEMC2Remoteportuser | read-write | current | User of GE-MC2 Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.6.1.61 | Columnmc2200-GEMC2TrapFilterLocalLAN | read-write | current | Local LAN of GEMC2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.6.1.62 | Columnmc2200-GEMC2TrapFilterLocalWAN | read-write | current | Local WAN of GEMC2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.6.1.63 | Columnmc2200-GEMC2TrapFilterRemotePower | read-write | current | Remote Power of GEMC2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.6.1.64 | Columnmc2200-GEMC2TrapFilterRemoteLAN | read-write | current | Remote LAN of GEMC2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.6.1.65 | Columnmc2200-GEMC2TrapFilterRemoteWAN | read-write | current | Remote WAN of GEMC2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.11 | Tablemc2200-FESFPTable | not-accessible | current | Sparse table containing one entry for each FESFP 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.11.1 | Rowmc2200-FESFPEntry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered FESFP media converter, then entry 'n' in this table exists and… |
| 1.3.6.1.4.1.28350.4.1.3.11.1.1 | Columnmc2200-FESFPCardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.11.1.2 | Columnmc2200-FESFPLocalTXLink | read-only | mandatory | FESFP Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.3 | Columnmc2200-FESFPLocalWANSFPInfo | read-only | current | FESFP Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.4 | Columnmc2200-FESFPLocalWANLink | read-only | current | FESFP Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.5 | Columnmc2200-FESFPLocalTXDownStreamBW | read-write | current | FESFP Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.6 | Columnmc2200-FESFPLocalTXUpStreamBW | read-write | current | FESFP Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.7 | Columnmc2200-FESFPLocalTXMode | read-write | current | FESFP Local card's LAN port Mode configuration, set INTEGER(1) to auto(10/100), set INTEGER(2) to 10H, set INTEGER(3) to 10F, set INTEGER(4) to 100H, set INTEG… |
| 1.3.6.1.4.1.28350.4.1.3.11.1.8 | Columnmc2200-FESFPLocalTXMDIX | read-write | current | FESFP Local card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDIX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.11.1.9 | Columnmc2200-FESFPRxGoodOctets | read-only | current | FESFP Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.11 | Columnmc2200-FESFPRxBadOctets | read-only | current | FESFP Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.12 | Columnmc2200-FESFPTxFCSErr | read-only | current | FESFP Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.13 | Columnmc2200-FESFPRxUnicast | read-only | current | FESFP Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.14 | Columnmc2200-FESFPTxDeferred | read-only | current | FESFP Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.15 | Columnmc2200-FESFPRxBroadcasts | read-only | current | FESFP Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.16 | Columnmc2200-FESFPRxMulticasts | read-only | current | FESFP Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.17 | Columnmc2200-FESFPRx64Octets | read-only | current | FESFP Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.18 | Columnmc2200-FESFPRx65to127Octets | read-only | current | FESFP Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.19 | Columnmc2200-FESFPRx128to255Octets | read-only | current | FESFP Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.20 | Columnmc2200-FESFPRx256to511Octets | read-only | current | FESFP Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.21 | Columnmc2200-FESFPRx512to1023Octets | read-only | current | FESFP Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.22 | Columnmc2200-FESFPRx1024toMaxOctets | read-only | current | FESFP Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.23 | Columnmc2200-FESFPTxOctets | read-only | current | FESFP Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.25 | Columnmc2200-FESFPTxUnicast | read-only | current | FESFP Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.26 | Columnmc2200-FESFPTxExcessive | read-only | current | FESFP Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.27 | Columnmc2200-FESFPTxMulticasts | read-only | current | FESFP Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.28 | Columnmc2200-FESFPTxBroadcasts | read-only | current | FESFP Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.29 | Columnmc2200-FESFPTxSingle | read-only | current | FESFP Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.30 | Columnmc2200-FESFPTxPause | read-only | current | FESFP Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.31 | Columnmc2200-FESFPRxPause | read-only | current | FESFP Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.32 | Columnmc2200-FESFPTxMultiple | read-only | current | FESFP Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.33 | Columnmc2200-FESFPRxUndersize | read-only | current | FESFP Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.34 | Columnmc2200-FESFPRxFragments | read-only | current | FESFP Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.35 | Columnmc2200-FESFPRxOversize | read-only | current | FESFP Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.36 | Columnmc2200-FESFPRxJabber | read-only | current | FESFP Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.37 | Columnmc2200-FESFPRxErr | read-only | current | FESFP Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.38 | Columnmc2200-FESFPRxFCSErr | read-only | current | FESFP Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.39 | Columnmc2200-FESFPTxCollisions | read-only | current | FESFP Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.40 | Columnmc2200-FESFPTxLate | read-only | current | FESFP Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.41 | Columnmc2200-FESFPRemoteTXLink | read-only | mandatory | FESFP Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.42 | Columnmc2200-FESFPRemoteWANSFPInfo | read-only | current | FESFP Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.43 | Columnmc2200-FESFPRemoteWANLink | read-only | current | FESFP Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.44 | Columnmc2200-FESFPRemoteTXMode | read-write | current | FESFP Remote card's LAN port Mode configuration, set INTEGER(1) to auto(10/100), set INTEGER(2) to 10H, set INTEGER(3) to 10F, set INTEGER(4) to 100H, set INTE… |
| 1.3.6.1.4.1.28350.4.1.3.11.1.45 | Columnmc2200-FESFPRemoteTXMDIX | read-write | current | FESFP Remote card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDIX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.11.1.46 | Columnmc2200-FESFPRemoteIPAddress | read-write | mandatory | The IP address to FESFP Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.47 | Columnmc2200-FESFPRemoteSubnetMask | read-write | mandatory | The Net mask to FESFP Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.48 | Columnmc2200-FESFPRemoteGateWay | read-write | mandatory | The gateware to FESFP Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.49 | Columnmc2200-FESFPRemoteVLANEnable | read-write | mandatory | Enable or disable Remote FESFP IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.50 | Columnmc2200-FESFPRemoteVID | read-write | mandatory | FESFP Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.51 | Columnmc2200-FESFPRemoteAlarm | read-write | current | Enable or disable FESFP Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is invali… |
| 1.3.6.1.4.1.28350.4.1.3.11.1.52 | Columnmc2200-FESFPRFD | read-write | current | FESFP Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.53 | Columnmc2200-FESFPDefault | write-only | current | Write FESFP card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.54 | Columnmc2200-FESFPReboot | write-only | current | Reboot FESFP local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.55 | Columnmc2200-FESFPLocalTXSpeed | read-only | mandatory | FESFP Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.56 | Columnmc2200-FESFPRemoteTXSpeed | read-only | mandatory | FESFP Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.57 | Columnmc2200-FESFPLocalportuser | read-write | current | User of FESFP Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.58 | Columnmc2200-FESFPRemoteportuser | read-write | current | User of FESFP Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.59 | Columnmc2200-FESFPLocalTXDuplex | read-only | mandatory | FESFP Local card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.60 | Columnmc2200-FESFPRemoteTXDuplex | read-only | mandatory | FESFP Remote card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.61 | Columnmc2200-FESFPFlowControl | read-write | current | FESFP Media converter card flow control operation. set INTEGER(1) to Enable Flow Control, set INTEGER(2) to Disable Flow Control, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.62 | Columnmc2200-FESFPWANOpticalPowerCheck | read-write | current | FESFP Media converter card WANOpticalPowerCheck operation. set INTEGER(1) to Enable WANOpticalPowerCheck, set INTEGER(2) to Disable WANOpticalPowerCheck, Other… |
| 1.3.6.1.4.1.28350.4.1.3.11.1.63 | Columnmc2200-FESFPWANThreshold | read-write | current | FESFP Media converter card WANThreshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.64 | Columnmc2200-FESFPTrapFilterLocalLAN | read-write | current | Local LAN of FEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.11.1.65 | Columnmc2200-FESFPTrapFilterLocalWAN | read-write | current | Local WAN of FEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.11.1.66 | Columnmc2200-FESFPTrapFilterRemotePower | read-write | current | Remote Power of FEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.11.1.67 | Columnmc2200-FESFPTrapFilterRemoteLAN | read-write | current | Remote LAN of FEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.11.1.68 | Columnmc2200-FESFPTrapFilterRemoteWAN | read-write | current | Remote WAN of FEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.11.1.69 | Columnmc2200-FESFPLoopback | read-write | mandatory | FEMC3 card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.11.1.70 | Columnmc2200-FESFPCardType | read-only | current | FESFP card's Type. |
| 1.3.6.1.4.1.28350.4.1.3.12 | Tablemc2200-GESFPTable | not-accessible | current | Sparse table containing one entry for each GESFP 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.12.1 | Rowmc2200-GESFPEntry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GESFP media converter, then entry 'n' in this table exists and… |
| 1.3.6.1.4.1.28350.4.1.3.12.1.1 | Columnmc2200-GESFPCardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.12.1.2 | Columnmc2200-GESFPLocalTXLink | read-only | mandatory | GESFP Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.3 | Columnmc2200-GESFPLocalWANSFPInfo | read-only | current | GESFP Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.4 | Columnmc2200-GESFPLocalWANLink | read-only | current | GESFP Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.5 | Columnmc2200-GESFPLocalTXDownStreamBW | read-write | current | GESFP Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.6 | Columnmc2200-GESFPLocalTXUpStreamBW | read-write | current | GESFP Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.7 | Columnmc2200-GESFPLocalTXMode | read-write | current | GESFP Local card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000), set INTEGER(2) to 1000F, set INTEGER(3) to 100F, set INTEGER(4) to 10F, se… |
| 1.3.6.1.4.1.28350.4.1.3.12.1.8 | Columnmc2200-GESFPLocalTXMDIX | read-write | current | GESFP Local card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDIX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.12.1.9 | Columnmc2200-GESFPRxGoodOctets | read-only | current | GESFP Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.11 | Columnmc2200-GESFPRxBadOctets | read-only | current | GESFP Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.12 | Columnmc2200-GESFPTxFCSErr | read-only | current | GESFP Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.13 | Columnmc2200-GESFPRxUnicast | read-only | current | GESFP Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.14 | Columnmc2200-GESFPTxDeferred | read-only | current | GESFP Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.15 | Columnmc2200-GESFPRxBroadcasts | read-only | current | GESFP Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.16 | Columnmc2200-GESFPRxMulticasts | read-only | current | GESFP Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.17 | Columnmc2200-GESFPRx64Octets | read-only | current | GESFP Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.18 | Columnmc2200-GESFPRx65to127Octets | read-only | current | GESFP Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.19 | Columnmc2200-GESFPRx128to255Octets | read-only | current | GESFP Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.20 | Columnmc2200-GESFPRx256to511Octets | read-only | current | GESFP Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.21 | Columnmc2200-GESFPRx512to1023Octets | read-only | current | GESFP Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.22 | Columnmc2200-GESFPRx1024toMaxOctets | read-only | current | GESFP Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.23 | Columnmc2200-GESFPTxOctets | read-only | current | GESFP Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.25 | Columnmc2200-GESFPTxUnicast | read-only | current | GESFP Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.26 | Columnmc2200-GESFPTxExcessive | read-only | current | GESFP Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.27 | Columnmc2200-GESFPTxMulticasts | read-only | current | GESFP Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.28 | Columnmc2200-GESFPTxBroadcasts | read-only | current | GESFP Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.29 | Columnmc2200-GESFPTxSingle | read-only | current | GESFP Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.30 | Columnmc2200-GESFPTxPause | read-only | current | GESFP Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.31 | Columnmc2200-GESFPRxPause | read-only | current | GESFP Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.32 | Columnmc2200-GESFPTxMultiple | read-only | current | GESFP Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.33 | Columnmc2200-GESFPRxUndersize | read-only | current | GESFP Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.34 | Columnmc2200-GESFPRxFragments | read-only | current | GESFP Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.35 | Columnmc2200-GESFPRxOversize | read-only | current | GESFP Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.36 | Columnmc2200-GESFPRxJabber | read-only | current | GESFP Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.37 | Columnmc2200-GESFPRxErr | read-only | current | GESFP Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.38 | Columnmc2200-GESFPRxFCSErr | read-only | current | GESFP Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.39 | Columnmc2200-GESFPTxCollisions | read-only | current | GESFP Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.40 | Columnmc2200-GESFPTxLate | read-only | current | GESFP Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.41 | Columnmc2200-GESFPRemoteTXLink | read-only | mandatory | GESFP Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.42 | Columnmc2200-GESFPRemoteWANSFPInfo | read-only | current | GESFP Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.43 | Columnmc2200-GESFPRemoteWANLink | read-only | current | GESFP Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.44 | Columnmc2200-GESFPRemoteTXMode | read-write | current | GESFP Remote card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000), set INTEGER(2) to 1000F, set INTEGER(3) to 100F, set INTEGER(4) to 10F, s… |
| 1.3.6.1.4.1.28350.4.1.3.12.1.45 | Columnmc2200-GESFPRemoteTXMDIX | read-write | current | GESFP Remote card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDIX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.12.1.46 | Columnmc2200-GESFPRemoteIPAddress | read-write | mandatory | The IP address to GESFP Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.47 | Columnmc2200-GESFPRemoteSubnetMask | read-write | mandatory | The Net mask to GESFP Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.48 | Columnmc2200-GESFPRemoteGateWay | read-write | mandatory | The gateware to GESFP Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.49 | Columnmc2200-GESFPRemoteVLANEnable | read-write | mandatory | Enable or disable Remote GESFP IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.50 | Columnmc2200-GESFPRemoteVID | read-write | mandatory | GESFP Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.51 | Columnmc2200-GESFPRemoteAlarm | read-write | current | Enable or disable GESFP Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is invali… |
| 1.3.6.1.4.1.28350.4.1.3.12.1.52 | Columnmc2200-GESFPRFD | read-write | current | GESFP Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.53 | Columnmc2200-GESFPDefault | write-only | current | Write GESFP card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.54 | Columnmc2200-GESFPReboot | write-only | current | Reboot GESFP local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.55 | Columnmc2200-GESFPLocalTXSpeed | read-only | mandatory | GESFP Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.56 | Columnmc2200-GESFPRemoteTXSpeed | read-only | mandatory | GESFP Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.57 | Columnmc2200-GESFPLocalportuser | read-write | current | User of GESFP Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.58 | Columnmc2200-GESFPRemoteportuser | read-write | current | User of GESFP Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.59 | Columnmc2200-GESFPLocalTXDuplex | read-only | mandatory | GESFP Local card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.60 | Columnmc2200-GESFPRemoteTXDuplex | read-only | mandatory | GESFP Remote card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.61 | Columnmc2200-GESFPFlowControl | read-write | current | GESFP Media converter card flow control operation. set INTEGER(1) to Enable Flow Control, set INTEGER(2) to Disable Flow Control, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.62 | Columnmc2200-GESFPWANOpticalPowerCheck | read-write | current | GESFP Media converter card WANOpticalPowerCheck operation. set INTEGER(1) to Enable WANOpticalPowerCheck, set INTEGER(2) to Disable WANOpticalPowerCheck, Other… |
| 1.3.6.1.4.1.28350.4.1.3.12.1.63 | Columnmc2200-GESFPWANThreshold | read-write | current | GESFP Media converter card WANThreshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.64 | Columnmc2200-GESFPTrapFilterLocalLAN | read-write | current | Local LAN of GESFP Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.12.1.65 | Columnmc2200-GESFPTrapFilterLocalWAN | read-write | current | Local WAN of GESFP Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.12.1.66 | Columnmc2200-GESFPTrapFilterRemotePower | read-write | current | Remote Power of GESFP Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.12.1.67 | Columnmc2200-GESFPTrapFilterRemoteLAN | read-write | current | Remote LAN of GESFP Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.12.1.68 | Columnmc2200-GESFPTrapFilterRemoteWAN | read-write | current | Remote WAN of GESFP Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.12.1.69 | Columnmc2200-GESFPLoopback | read-write | mandatory | GESFP card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.12.1.70 | Columnmc2200-GESFPCardType | read-only | current | GESFP card's Type. |
| 1.3.6.1.4.1.28350.4.1.3.13 | Tablemc2200-GEMC3Table | not-accessible | current | Sparse table containing one entry for each GEMC3 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.13.1 | Rowmc2200-GEMC3Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GEMC3 media converter, then entry 'n' in this table exists and… |
| 1.3.6.1.4.1.28350.4.1.3.13.1.1 | Columnmc2200-GEMC3CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.13.1.2 | Columnmc2200-GEMC3LocalLANSFPInfo | read-only | current | GEMC3 Local card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.3 | Columnmc2200-GEMC3LocalLANLink | read-only | mandatory | GEMC3 Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.4 | Columnmc2200-GEMC3LocalWANSFPInfo | read-only | current | GEMC3 Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.5 | Columnmc2200-GEMC3LocalWANLink | read-only | current | GEMC3 Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.6 | Columnmc2200-GEMC3LocalLANDownStreamBW | read-write | current | GEMC3 Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.7 | Columnmc2200-GEMC3LocalLANUpStreamBW | read-write | current | GEMC3 Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.8 | Columnmc2200-GEMC3LocalLANMode | read-write | current | GEMC3 Local card's LAN port Mode configuration, set INTEGER(1) to 1000Base-X-auto, set INTEGER(2) to 1000Base-X-Force, set INTEGER(3) to auto-10-100-1000T, set… |
| 1.3.6.1.4.1.28350.4.1.3.13.1.9 | Columnmc2200-GEMC3RxGoodOctets | read-only | current | GEMC3 Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.11 | Columnmc2200-GEMC3RxBadOctets | read-only | current | GEMC3 Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.12 | Columnmc2200-GEMC3TxFCSErr | read-only | current | GEMC3 Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.13 | Columnmc2200-GEMC3RxUnicast | read-only | current | GEMC3 Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.14 | Columnmc2200-GEMC3TxDeferred | read-only | current | GEMC3 Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.15 | Columnmc2200-GEMC3RxBroadcasts | read-only | current | GEMC3 Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.16 | Columnmc2200-GEMC3RxMulticasts | read-only | current | GEMC3 Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.17 | Columnmc2200-GEMC3Rx64Octets | read-only | current | GEMC3 Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.18 | Columnmc2200-GEMC3Rx65to127Octets | read-only | current | GEMC3 Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.19 | Columnmc2200-GEMC3Rx128to255Octets | read-only | current | GEMC3 Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.20 | Columnmc2200-GEMC3Rx256to511Octets | read-only | current | GEMC3 Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.21 | Columnmc2200-GEMC3Rx512to1023Octets | read-only | current | GEMC3 Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.22 | Columnmc2200-GEMC3Rx1024toMaxOctets | read-only | current | GEMC3 Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.23 | Columnmc2200-GEMC3TxOctets | read-only | current | GEMC3 Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.25 | Columnmc2200-GEMC3TxUnicast | read-only | current | GEMC3 Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.26 | Columnmc2200-GEMC3TxExcessive | read-only | current | GEMC3 Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.27 | Columnmc2200-GEMC3TxMulticasts | read-only | current | GEMC3 Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.28 | Columnmc2200-GEMC3TxBroadcasts | read-only | current | GEMC3 Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.29 | Columnmc2200-GEMC3TxSingle | read-only | current | GEMC3 Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.30 | Columnmc2200-GEMC3TxPause | read-only | current | GEMC3 Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.31 | Columnmc2200-GEMC3RxPause | read-only | current | GEMC3 Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.32 | Columnmc2200-GEMC3TxMultiple | read-only | current | GEMC3 Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.33 | Columnmc2200-GEMC3RxUndersize | read-only | current | GEMC3 Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.34 | Columnmc2200-GEMC3RxFragments | read-only | current | GEMC3 Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.35 | Columnmc2200-GEMC3RxOversize | read-only | current | GEMC3 Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.36 | Columnmc2200-GEMC3RxJabber | read-only | current | GEMC3 Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.37 | Columnmc2200-GEMC3RxErr | read-only | current | GEMC3 Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.38 | Columnmc2200-GEMC3RxFCSErr | read-only | current | GEMC3 Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.39 | Columnmc2200-GEMC3TxCollisions | read-only | current | GEMC3 Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.40 | Columnmc2200-GEMC3TxLate | read-only | current | GEMC3 Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.41 | Columnmc2200-GEMC3RemoteLANSFPInfo | read-only | current | GEMC3 Remote card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.42 | Columnmc2200-GEMC3RemoteLANLink | read-only | mandatory | GEMC3 Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.43 | Columnmc2200-GEMC3RemoteWANSFPInfo | read-only | current | GEMC3 Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.44 | Columnmc2200-GEMC3RemoteWANLink | read-only | current | GEMC3 Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.45 | Columnmc2200-GEMC3RemoteLANMode | read-write | current | GEMC3 Remote card's LAN port Mode configuration, set INTEGER(1) to 1000Base-X-auto, set INTEGER(2) to 1000Base-X-Force, set INTEGER(3) to auto-10-100-1000T, se… |
| 1.3.6.1.4.1.28350.4.1.3.13.1.46 | Columnmc2200-GEMC3RemoteIPAddress | read-write | mandatory | The IP address to GEMC3 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.47 | Columnmc2200-GEMC3RemoteSubnetMask | read-write | mandatory | The Net mask to GEMC3 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.48 | Columnmc2200-GEMC3RemoteGateWay | read-write | mandatory | The gateware to GEMC3 Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.49 | Columnmc2200-GEMC3RemoteVLANEnable | read-write | mandatory | Enable or disable Remote GEMC3 IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.50 | Columnmc2200-GEMC3RemoteVID | read-write | mandatory | GEMC3 Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.51 | Columnmc2200-GEMC3RemoteAlarm | read-write | current | Enable or disable GEMC3 Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is invali… |
| 1.3.6.1.4.1.28350.4.1.3.13.1.52 | Columnmc2200-GEMC3RFD | read-write | current | GEMC3 Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.53 | Columnmc2200-GEMC3Default | write-only | current | Write GEMC3 card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.54 | Columnmc2200-GEMC3Reboot | write-only | current | Reboot GEMC3 local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.55 | Columnmc2200-GEMC3LocalLANSpeed | read-only | mandatory | GE-MC3 Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.56 | Columnmc2200-GEMC3RemoteLANSpeed | read-only | mandatory | GE-MC3 Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.57 | Columnmc2200-GEMC3Localportuser | read-write | current | User of GE-MC3 Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.58 | Columnmc2200-GEMC3Remoteportuser | read-write | current | User of GE-MC3 Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.59 | Columnmc2200-GEMC3WANOpticalPowerCheck | read-write | current | GEMC3 Media converter card WANOpticalPowerCheck operation. set INTEGER(1) to Enable WANOpticalPowerCheck, set INTEGER(2) to Disable WANOpticalPowerCheck, Other… |
| 1.3.6.1.4.1.28350.4.1.3.13.1.60 | Columnmc2200-GEMC3WANThreshold | read-write | current | GEMC3 Media converter card WANThreshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.61 | Columnmc2200-GEMC3TrapFilterLocalLAN | read-write | current | Local LAN of GEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.13.1.62 | Columnmc2200-GEMC3TrapFilterLocalWAN | read-write | current | Local WAN of GEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.13.1.63 | Columnmc2200-GEMC3TrapFilterRemotePower | read-write | current | Remote Power of GEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.13.1.64 | Columnmc2200-GEMC3TrapFilterRemoteLAN | read-write | current | Remote LAN of GEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.13.1.65 | Columnmc2200-GEMC3TrapFilterRemoteWAN | read-write | current | Remote WAN of GEMC3 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.13.1.66 | Columnmc2200-GEMC3Loopback | read-write | mandatory | GEMC3 card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.13.1.67 | Columnmc2200-GEMC3CardType | read-only | current | GEMC3 card's Type. |
| 1.3.6.1.4.1.28350.4.1.3.14 | Tablemc2200-GESFPAPSTable | not-accessible | current | Sparse table containing one entry for each GESFPAPS 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIn… |
| 1.3.6.1.4.1.28350.4.1.3.14.1 | Rowmc2200-GESFPAPSEntry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GESFPAPS media converter, then entry 'n' in this table exists … |
| 1.3.6.1.4.1.28350.4.1.3.14.1.1 | Columnmc2200-GESFPAPSCardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.14.1.2 | Columnmc2200-GESFPAPSLocalTXLink | read-only | mandatory | GESFPAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.3 | Columnmc2200-GESFPAPSLocalWAN1SFPInfo | read-only | current | GESFPAPS Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.4 | Columnmc2200-GESFPAPSLocalWAN1Link | read-only | current | GESFPAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.5 | Columnmc2200-GESFPAPSLocalWAN2SFPInfo | read-only | current | GESFPAPS Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.6 | Columnmc2200-GESFPAPSLocalWAN2Link | read-only | current | GESFPAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.7 | Columnmc2200-GESFPAPSLocalActivePort | read-write | current | GESFPAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.8 | Columnmc2200-GESFPAPSLocalTXDownStreamBW | read-write | current | GESFPAPS Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.9 | Columnmc2200-GESFPAPSLocalTXUpStreamBW | read-write | current | GESFPAPS Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.10 | Columnmc2200-GESFPAPSLocalTXMode | read-write | current | GESFPAPS Local card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000), set INTEGER(2) to 1000F, set INTEGER(3) to 100F, set INTEGER(4) to 10F,… |
| 1.3.6.1.4.1.28350.4.1.3.14.1.11 | Columnmc2200-GESFPAPSLocalTXMDIX | read-write | current | GESFPAPS Local card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to MDIX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.14.1.12 | Columnmc2200-GESFPAPSRxGoodOctets | read-only | current | GESFPAPS Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.14 | Columnmc2200-GESFPAPSRxBadOctets | read-only | current | GESFPAPS Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.15 | Columnmc2200-GESFPAPSTxFCSErr | read-only | current | GESFPAPS Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.16 | Columnmc2200-GESFPAPSRxUnicast | read-only | current | GESFPAPS Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.17 | Columnmc2200-GESFPAPSTxDeferred | read-only | current | GESFPAPS Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.18 | Columnmc2200-GESFPAPSRxBroadcasts | read-only | current | GESFPAPS Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.19 | Columnmc2200-GESFPAPSRxMulticasts | read-only | current | GESFPAPS Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.20 | Columnmc2200-GESFPAPSRx64Octets | read-only | current | GESFPAPS Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.21 | Columnmc2200-GESFPAPSRx65to127Octets | read-only | current | GESFPAPS Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.22 | Columnmc2200-GESFPAPSRx128to255Octets | read-only | current | GESFPAPS Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.23 | Columnmc2200-GESFPAPSRx256to511Octets | read-only | current | GESFPAPS Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.24 | Columnmc2200-GESFPAPSRx512to1023Octets | read-only | current | GESFPAPS Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.25 | Columnmc2200-GESFPAPSRx1024toMaxOctets | read-only | current | GESFPAPS Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.26 | Columnmc2200-GESFPAPSTxOctets | read-only | current | GESFPAPS Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.28 | Columnmc2200-GESFPAPSTxUnicast | read-only | current | GESFPAPS Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.29 | Columnmc2200-GESFPAPSTxExcessive | read-only | current | GESFPAPS Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.30 | Columnmc2200-GESFPAPSTxMulticasts | read-only | current | GESFPAPS Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.31 | Columnmc2200-GESFPAPSTxBroadcasts | read-only | current | GESFPAPS Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.32 | Columnmc2200-GESFPAPSTxSingle | read-only | current | GESFPAPS Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.33 | Columnmc2200-GESFPAPSTxPause | read-only | current | GESFPAPS Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.34 | Columnmc2200-GESFPAPSRxPause | read-only | current | GESFPAPS Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.35 | Columnmc2200-GESFPAPSTxMultiple | read-only | current | GESFPAPS Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.36 | Columnmc2200-GESFPAPSRxUndersize | read-only | current | GESFPAPS Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.37 | Columnmc2200-GESFPAPSRxFragments | read-only | current | GESFPAPS Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.38 | Columnmc2200-GESFPAPSRxOversize | read-only | current | GESFPAPS Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.39 | Columnmc2200-GESFPAPSRxJabber | read-only | current | GESFPAPS Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.40 | Columnmc2200-GESFPAPSRxErr | read-only | current | GESFPAPS Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.41 | Columnmc2200-GESFPAPSRxFCSErr | read-only | current | GESFPAPS Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.42 | Columnmc2200-GESFPAPSTxCollisions | read-only | current | GESFPAPS Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.43 | Columnmc2200-GESFPAPSTxLate | read-only | current | GESFPAPS Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.44 | Columnmc2200-GESFPAPSRemoteTXLink | read-only | mandatory | GESFPAPS Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.45 | Columnmc2200-GESFPAPSRemoteWAN1SFPInfo | read-only | current | GESFPAPS Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.46 | Columnmc2200-GESFPAPSRemoteWAN1Link | read-only | current | GESFPAPS Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.47 | Columnmc2200-GESFPAPSRemoteWAN2SFPInfo | read-only | current | GESFPAPS Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.48 | Columnmc2200-GESFPAPSRemoteWAN2Link | read-only | current | GESFPAPS Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.49 | Columnmc2200-GESFPAPSRemoteTXMode | read-write | current | GESFPAPS Remote card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000), set INTEGER(2) to 1000F, set INTEGER(3) to 100F, set INTEGER(4) to 10F… |
| 1.3.6.1.4.1.28350.4.1.3.14.1.50 | Columnmc2200-GESFPAPSRemoteTXMDIX | read-write | current | GESFPAPS Remote card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to MDI, set INTEGER(3) to MDIX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.14.1.51 | Columnmc2200-GESFPAPSRemoteIPAddress | read-write | mandatory | The IP address to GESFPAPS Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.52 | Columnmc2200-GESFPAPSRemoteSubnetMask | read-write | mandatory | The Net mask to GESFPAPS Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.53 | Columnmc2200-GESFPAPSRemoteGateWay | read-write | mandatory | The gateware to GESFPAPS Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.54 | Columnmc2200-GESFPAPSRemoteVLANEnable | read-write | mandatory | Enable or disable Remote GESFPAPS IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.55 | Columnmc2200-GESFPAPSRemoteVID | read-write | mandatory | GESFPAPS Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.56 | Columnmc2200-GESFPAPSRemoteAlarm | read-write | current | Enable or disable GESFPAPS Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is inv… |
| 1.3.6.1.4.1.28350.4.1.3.14.1.57 | Columnmc2200-GESFPAPSRFD | read-write | current | GESFPAPS Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.58 | Columnmc2200-GESFPAPSDefault | write-only | current | Write GESFPAPS card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.59 | Columnmc2200-GESFPAPSReboot | write-only | current | Reboot GESFPAPS local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.60 | Columnmc2200-GESFPAPSLocalTXSpeed | read-only | mandatory | GESFPAPS Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.61 | Columnmc2200-GESFPAPSRemoteTXSpeed | read-only | mandatory | GESFPAPS Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.62 | Columnmc2200-GESFPAPSLocalportuser | read-write | current | User of GESFPAPS Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.63 | Columnmc2200-GESFPAPSRemoteportuser | read-write | current | User of GESFPAPS Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.64 | Columnmc2200-GESFPAPSLocalTXDuplex | read-only | mandatory | GESFPAPS Local card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.65 | Columnmc2200-GESFPAPSRemoteTXDuplex | read-only | mandatory | GESFPAPS Remote card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.66 | Columnmc2200-GESFPAPSFlowControl | read-write | current | GESFPAPS Media converter card flow control operation. set INTEGER(1) to Enable Flow Control, set INTEGER(2) to Disable Flow Control, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.67 | Columnmc2200-GESFPAPSRevertive | read-write | current | GESFPAPS Media converter card Revertive operation. set INTEGER(1) to Enable Revertive, set INTEGER(2) to Enable NoRevertive, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.68 | Columnmc2200-GESFPAPSWAN1OpticalPowerCheck | read-write | current | GESFPAPS Media converter card WAN1 OpticalPowerCheck operation. set INTEGER(1) to Enable OpticalPowerCheck, set INTEGER(2) to Disable OpticalPowerCheck, set IN… |
| 1.3.6.1.4.1.28350.4.1.3.14.1.69 | Columnmc2200-GESFPAPSWAN1Threshold | read-write | current | GESFPAPS Media converter card WAN1Threshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.70 | Columnmc2200-GESFPAPSWAN2OpticalPowerCheck | read-write | current | GESFPAPS Media converter card WAN2 OpticalPowerCheck operation. set INTEGER(1) to Enable OpticalPowerCheck, set INTEGER(2) to Disable OpticalPowerCheck, set IN… |
| 1.3.6.1.4.1.28350.4.1.3.14.1.71 | Columnmc2200-GESFPAPSWAN2Threshold | read-write | current | GESFPAPS Media converter card wan2 Threshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.72 | Columnmc2200-GESFPAPSTrapFilterLocalLAN | read-write | current | Local LAN of GESFPAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.14.1.73 | Columnmc2200-GESFPAPSTrapFilterLocalWAN | read-write | current | Local WAN of GESFPAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.14.1.74 | Columnmc2200-GESFPAPSTrapFilterRemotePower | read-write | current | Remote Power of GESFPAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.14.1.75 | Columnmc2200-GESFPAPSTrapFilterRemoteLAN | read-write | current | Remote LAN of GESFPAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.14.1.76 | Columnmc2200-GESFPAPSTrapFilterRemoteWAN | read-write | current | Remote WAN of GESFPAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.14.1.77 | Columnmc2200-GESFPAPSLoopback | read-write | mandatory | GESFPAPS card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.14.1.78 | Columnmc2200-GESFPAPSCardType | read-only | current | GESFPAPS card's Type. |
| 1.3.6.1.4.1.28350.4.1.3.15 | Tablemc2200-GEMCAPSTable | not-accessible | current | Sparse table containing one entry for each GEMCAPS 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotInd… |
| 1.3.6.1.4.1.28350.4.1.3.15.1 | Rowmc2200-GEMCAPSEntry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GEMCAPS media converter, then entry 'n' in this table exists a… |
| 1.3.6.1.4.1.28350.4.1.3.15.1.1 | Columnmc2200-GEMCAPSCardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.15.1.2 | Columnmc2200-GEMCAPSLocalLANSFPInfo | read-only | current | GEMCAPS Local card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.3 | Columnmc2200-GEMCAPSLocalLANLink | read-only | mandatory | GEMCAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.4 | Columnmc2200-GEMCAPSLocalWAN1SFPInfo | read-only | current | GEMCAPS Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.5 | Columnmc2200-GEMCAPSLocalWAN1Link | read-only | current | GEMCAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.6 | Columnmc2200-GEMCAPSLocalWAN2SFPInfo | read-only | current | GEMCAPS Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.7 | Columnmc2200-GEMCAPSLocalWAN2Link | read-only | current | GEMCAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.8 | Columnmc2200-GEMCAPSLocalActivePort | read-write | current | GEMCAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.9 | Columnmc2200-GEMCAPSLocalLANDownStreamBW | read-write | current | GEMCAPS Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.10 | Columnmc2200-GEMCAPSLocalLANUpStreamBW | read-write | current | GEMCAPS Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.11 | Columnmc2200-GEMCAPSLocalLANMode | read-write | current | GEMC3 Local card's LAN port Mode configuration, set INTEGER(1) to 1000Base-X-auto, set INTEGER(2) to 1000Base-X-Force, set INTEGER(3) to auto-10-100-1000T, set… |
| 1.3.6.1.4.1.28350.4.1.3.15.1.12 | Columnmc2200-GEMCAPSRxGoodOctets | read-only | current | GEMCAPS Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.14 | Columnmc2200-GEMCAPSRxBadOctets | read-only | current | GEMCAPS Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.15 | Columnmc2200-GEMCAPSTxFCSErr | read-only | current | GEMCAPS Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.16 | Columnmc2200-GEMCAPSRxUnicast | read-only | current | GEMCAPS Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.17 | Columnmc2200-GEMCAPSTxDeferred | read-only | current | GEMCAPS Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.18 | Columnmc2200-GEMCAPSRxBroadcasts | read-only | current | GEMCAPS Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.19 | Columnmc2200-GEMCAPSRxMulticasts | read-only | current | GEMCAPS Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.20 | Columnmc2200-GEMCAPSRx64Octets | read-only | current | GEMCAPS Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.21 | Columnmc2200-GEMCAPSRx65to127Octets | read-only | current | GEMCAPS Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.22 | Columnmc2200-GEMCAPSRx128to255Octets | read-only | current | GEMCAPS Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.23 | Columnmc2200-GEMCAPSRx256to511Octets | read-only | current | GEMCAPS Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.24 | Columnmc2200-GEMCAPSRx512to1023Octets | read-only | current | GEMCAPS Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.25 | Columnmc2200-GEMCAPSRx1024toMaxOctets | read-only | current | GEMCAPS Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.26 | Columnmc2200-GEMCAPSTxOctets | read-only | current | GEMCAPS Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.28 | Columnmc2200-GEMCAPSTxUnicast | read-only | current | GEMCAPS Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.29 | Columnmc2200-GEMCAPSTxExcessive | read-only | current | GEMCAPS Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.30 | Columnmc2200-GEMCAPSTxMulticasts | read-only | current | GEMCAPS Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.31 | Columnmc2200-GEMCAPSTxBroadcasts | read-only | current | GEMCAPS Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.32 | Columnmc2200-GEMCAPSTxSingle | read-only | current | GEMCAPS Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.33 | Columnmc2200-GEMCAPSTxPause | read-only | current | GEMCAPS Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.34 | Columnmc2200-GEMCAPSRxPause | read-only | current | GEMCAPS Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.35 | Columnmc2200-GEMCAPSTxMultiple | read-only | current | GEMCAPS Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.36 | Columnmc2200-GEMCAPSRxUndersize | read-only | current | GEMCAPS Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.37 | Columnmc2200-GEMCAPSRxFragments | read-only | current | GEMCAPS Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.38 | Columnmc2200-GEMCAPSRxOversize | read-only | current | GEMCAPS Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.39 | Columnmc2200-GEMCAPSRxJabber | read-only | current | GEMCAPS Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.40 | Columnmc2200-GEMCAPSRxErr | read-only | current | GEMCAPS Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.41 | Columnmc2200-GEMCAPSRxFCSErr | read-only | current | GEMCAPS Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.42 | Columnmc2200-GEMCAPSTxCollisions | read-only | current | GEMCAPS Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.43 | Columnmc2200-GEMCAPSTxLate | read-only | current | GEMCAPS Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.44 | Columnmc2200-GEMCAPSRemoteLANSFPInfo | read-only | current | GEMCAPS Remote card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.45 | Columnmc2200-GEMCAPSRemoteLANLink | read-only | mandatory | GEMCAPS Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.46 | Columnmc2200-GEMCAPSRemoteWAN1SFPInfo | read-only | current | GEMCAPS Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.47 | Columnmc2200-GEMCAPSRemoteWAN1Link | read-only | current | GEMCAPS Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.48 | Columnmc2200-GEMCAPSRemoteWAN2SFPInfo | read-only | current | GEMCAPS Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.49 | Columnmc2200-GEMCAPSRemoteWAN2Link | read-only | current | GEMCAPS Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.50 | Columnmc2200-GEMCAPSRemoteLANMode | read-write | current | GEMC3 Local card's LAN port Mode configuration, set INTEGER(1) to 1000Base-X-auto, set INTEGER(2) to 1000Base-X-Force, set INTEGER(3) to auto-10-100-1000T, set… |
| 1.3.6.1.4.1.28350.4.1.3.15.1.51 | Columnmc2200-GEMCAPSRemoteIPAddress | read-write | mandatory | The IP address to GEMCAPS Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.52 | Columnmc2200-GEMCAPSRemoteSubnetMask | read-write | mandatory | The Net mask to GEMCAPS Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.53 | Columnmc2200-GEMCAPSRemoteGateWay | read-write | mandatory | The gateware to GEMCAPS Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.54 | Columnmc2200-GEMCAPSRemoteVLANEnable | read-write | mandatory | Enable or disable Remote GEMCAPS IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.55 | Columnmc2200-GEMCAPSRemoteVID | read-write | mandatory | GEMCAPS Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.56 | Columnmc2200-GEMCAPSRemoteAlarm | read-write | current | Enable or disable GEMCAPS Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is inva… |
| 1.3.6.1.4.1.28350.4.1.3.15.1.57 | Columnmc2200-GEMCAPSRFD | read-write | current | GEMCAPS Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.58 | Columnmc2200-GEMCAPSDefault | write-only | current | Write GEMCAPS card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.59 | Columnmc2200-GEMCAPSReboot | write-only | current | Reboot GEMCAPS local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.60 | Columnmc2200-GEMCAPSLocalLANSpeed | read-only | mandatory | GE-MC2 Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.61 | Columnmc2200-GEMCAPSRemoteLANSpeed | read-only | mandatory | GE-MC2 Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.62 | Columnmc2200-GEMCAPSLocalportuser | read-write | current | User of GEMCAPS Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.63 | Columnmc2200-GEMCAPSRemoteportuser | read-write | current | User of GEMCAPS Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.64 | Columnmc2200-GEMCAPSRevertive | read-write | current | GEMCAPS Media converter card Revertive operation. set INTEGER(1) to Enable Revertive, set INTEGER(2) to Enable No-Revertive, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.65 | Columnmc2200-GEMCAPSWAN1OpticalPowerCheck | read-write | current | GEMCAPS Media converter card WAN1 OpticalPowerCheck operation. set INTEGER(1) to Enable OpticalPowerCheck, set INTEGER(2) to Disable OpticalPowerCheck, set INT… |
| 1.3.6.1.4.1.28350.4.1.3.15.1.66 | Columnmc2200-GEMCAPSWAN1Threshold | read-write | current | GEMCAPS Media converter card wan1 Threshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.67 | Columnmc2200-GEMCAPSWAN2OpticalPowerCheck | read-write | current | GEMCAPS Media converter card WAN2 OpticalPowerCheck operation. set INTEGER(1) to Enable OpticalPowerCheck, set INTEGER(2) to Disable OpticalPowerCheck, set INT… |
| 1.3.6.1.4.1.28350.4.1.3.15.1.68 | Columnmc2200-GEMCAPSWAN2Threshold | read-write | current | GEMCAPS Media converter card wan2 Threshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.69 | Columnmc2200-GEMCAPSTrapFilterLocalLAN | read-write | current | Local LAN of GEMCAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.15.1.70 | Columnmc2200-GEMCAPSTrapFilterLocalWAN | read-write | current | Local WAN of GEMCAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.15.1.71 | Columnmc2200-GEMCAPSTrapFilterRemotePower | read-write | current | Remote Power of GEMCAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.15.1.72 | Columnmc2200-GEMCAPSTrapFilterRemoteLAN | read-write | current | Remote LAN of GEMCAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.15.1.73 | Columnmc2200-GEMCAPSTrapFilterRemoteWAN | read-write | current | Remote WAN of GEMCAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.15.1.74 | Columnmc2200-GEMCAPSLoopback | read-write | mandatory | GEMCAPS card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.15.1.75 | Columnmc2200-GEMCAPSCardType | read-only | current | GEMCAPS card's Type. |
| 1.3.6.1.4.1.28350.4.1.3.16 | Tablemc2200-OAPSTable | not-accessible | current | Sparse table containing one entry for each OAPS 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.16.1 | Rowmc2200-OAPSEntry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered OAPS media converter, then entry 'n' in this table exists and … |
| 1.3.6.1.4.1.28350.4.1.3.16.1.1 | Columnmc2200-OAPSCardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.16.1.2 | Columnmc2200-OAPSLocalLANLink | read-only | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.3 | Columnmc2200-OAPSLocalLANPower | read-only | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.4 | Columnmc2200-OAPSLocalLANThreshold | read-write | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.5 | Columnmc2200-OAPSLocalWAN1Link | read-only | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.6 | Columnmc2200-OAPSLocalWAN1Power | read-only | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.7 | Columnmc2200-OAPSLocalWAN1Threshold | read-write | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.8 | Columnmc2200-OAPSLocalWAN2Link | read-only | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.9 | Columnmc2200-OAPSLocalWAN2Power | read-only | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.10 | Columnmc2200-OAPSLocalWAN2Threshold | read-write | mandatory | OAPS Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.11 | Columnmc2200-OAPSLocalActivePort | read-write | current | OAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.12 | Columnmc2200-OAPSRevertive | read-write | current | OAPS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.13 | Columnmc2200-OAPSDefault | write-only | current | Write OAPS card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.14 | Columnmc2200-OAPSReboot | write-only | current | Reboot OAPS local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.15 | Columnmc2200-OAPSLocalportuser | read-write | current | User of OAPS Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.16 | Columnmc2200-OAPSRemoteportuser | read-write | current | User of OAPS Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.17 | Columnmc2200-OAPSUsingActiveport | read-only | current | OAPS using active port. |
| 1.3.6.1.4.1.28350.4.1.3.16.1.18 | Columnmc2200-OAPSTrapFilterLocalLAN | read-write | current | Local LAN of OAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.16.1.19 | Columnmc2200-OAPSTrapFilterLocalWAN | read-write | current | Local WAN of OAPS Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.17 | Tablemc2200-QS2204Table | not-accessible | current | Sparse table containing one entry for each 2204-QS 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotInd… |
| 1.3.6.1.4.1.28350.4.1.3.17.1 | Rowmc2200-QS2204Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered 2204-QS media converter, then entry 'n' in this table exists a… |
| 1.3.6.1.4.1.28350.4.1.3.17.1.1 | Columnmc2200-QS2204CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.17.1.2 | Columnmc2200-QS2204LocalLAN1Link | read-only | mandatory | 2204-QS Local card's LAN1 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.3 | Columnmc2200-QS2204LocalLAN1TxStatus | read-only | mandatory | 2204-QS Local card's LAN1 TX status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.4 | Columnmc2200-QS2204LocalLAN1SFPInfo | read-only | mandatory | 2204-QS Local card's LAN1 SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.5 | Columnmc2200-QS2204LocalLAN1Loopback | read-write | mandatory | 2204-QS Local card's LAN1 loopback. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.6 | Columnmc2200-QS2204LocalLAN2Link | read-only | mandatory | 2204-QS Local card's LAN2 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.7 | Columnmc2200-QS2204LocalLAN2TxStatus | read-only | mandatory | 2204-QS Local card's LAN2 TX status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.8 | Columnmc2200-QS2204LocalLAN2SFPInfo | read-only | mandatory | 2204-QS Local card's LAN2 SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.9 | Columnmc2200-QS2204LocalLAN2Loopback | read-write | mandatory | 2204-QS Local card's LAN2 loopback. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.10 | Columnmc2200-QS2204LocalLAN3Link | read-only | mandatory | 2204-QS Local card's LAN3 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.11 | Columnmc2200-QS2204LocalLAN3TxStatus | read-only | mandatory | 2204-QS Local card's LAN3 TX status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.12 | Columnmc2200-QS2204LocalLAN3SFPInfo | read-only | mandatory | 2204-QS Local card's LAN3 SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.13 | Columnmc2200-QS2204LocalLAN3Loopback | read-write | mandatory | 2204-QS Local card's LAN3 loopback. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.14 | Columnmc2200-QS2204LocalLAN4Link | read-only | mandatory | 2204-QS Local card's LAN4 port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.15 | Columnmc2200-QS2204LocalLAN4TxStatus | read-only | mandatory | 2204-QS Local card's LAN4 TX status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.16 | Columnmc2200-QS2204LocalLAN4SFPInfo | read-only | mandatory | 2204-QS Local card's LAN4 SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.17 | Columnmc2200-QS2204LocalLAN4Loopback | read-write | mandatory | 2204-QS Local card's LAN4 loopback. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.18 | Columnmc2200-QS2204LocalWANLink | read-only | mandatory | 2204-QS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.19 | Columnmc2200-QS2204LocalWANTxStatus | read-only | mandatory | 2204-QS Local card's WAN TX status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.20 | Columnmc2200-QS2204LocalWANSFPInfo | read-only | mandatory | 2204-QS Local card's WAN SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.21 | Columnmc2200-QS2204LocalWANLoopback | read-write | mandatory | 2204-QS Local card's WAN loopback. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.22 | Columnmc2200-QS2204RFD | read-write | current | 2204-QS Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.23 | Columnmc2200-QS2204Default | write-only | current | Write 2204-QS card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.24 | Columnmc2200-QS2204Reboot | write-only | current | Reboot 2204-QS local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.25 | Columnmc2200-QS2204LocalLAN1user | read-write | current | User of 2204-QS Local LAN1. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.26 | Columnmc2200-QS2204LocalLAN2user | read-write | current | User of 2204-QS Local LAN2. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.27 | Columnmc2200-QS2204LocalLAN3user | read-write | current | User of 2204-QS Local LAN3. |
| 1.3.6.1.4.1.28350.4.1.3.17.1.28 | Columnmc2200-QS2204LocalLAN4user | read-write | current | User of 2204-QS Local LAN4. |
| 1.3.6.1.4.1.28350.4.1.3.18 | Tablemc2200-Q2202Table | not-accessible | current | Sparse table containing one entry for each 2202-Q 100G Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.18.1 | Rowmc2200-Q2202Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered 2202-Q media converter, then entry 'n' in this table exists an… |
| 1.3.6.1.4.1.28350.4.1.3.18.1.1 | Columnmc2200-Q2202CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.18.1.2 | Columnmc2200-Q2202LocalLANLink | read-only | mandatory | 2202-Q Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.3 | Columnmc2200-Q2202LocalLANTxStatus | read-only | mandatory | 2202-Q Local card's LAN TX status. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.4 | Columnmc2200-Q2202LocalLANSFPInfo | read-only | mandatory | 2202-QS Local card's LAN SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.5 | Columnmc2200-Q2202LocalWANLink | read-only | mandatory | 2202-Q Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.6 | Columnmc2200-Q2202LocalWANTxStatus | read-only | mandatory | 2202-Q Local card's WAN TX status. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.7 | Columnmc2200-Q2202LocalWANSFPInfo | read-only | mandatory | 2202-Q Local card's WAN SFP information. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.8 | Columnmc2200-Q2202Loopback | read-write | mandatory | 2202-Q card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.9 | Columnmc2200-Q2202RFD | read-write | current | 2202-Q card's RFD status. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.10 | Columnmc2200-Q2202Default | write-only | current | Write 2202-Q card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.11 | Columnmc2200-Q2202Reboot | write-only | current | Reboot 2202-Q local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.12 | Columnmc2200-Q2202LocalLANuser | read-write | current | User of 2202-Q Local LAN. |
| 1.3.6.1.4.1.28350.4.1.3.18.1.13 | Columnmc2200-Q2202Rate | read-write | current | 2202-Q card's rate. |
| 1.3.6.1.4.1.28350.4.1.3.19 | Tablemc2200-GESFP2Table | not-accessible | current | Sparse table containing one entry for each GESFP2 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotInde… |
| 1.3.6.1.4.1.28350.4.1.3.19.1 | Rowmc2200-GESFP2Entry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered GESFP2 media converter, then entry 'n' in this table exists an… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.1 | Columnmc2200-GESFP2CardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.19.1.2 | Columnmc2200-GESFP2LocalTXLink | read-only | mandatory | GESFP2Entry Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.3 | Columnmc2200-GESFP2LocalWANSFPInfo | read-only | current | GESFP2Entry Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.4 | Columnmc2200-GESFP2LocalWANLink | read-only | current | GESFP2Entry Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.5 | Columnmc2200-GESFP2LocalTXMode | read-write | current | GESFP2Entry Local card's LAN port Mode configuration, set INTEGER(1) to auto(10/100/1000), set INTEGER(2) to 1000F, set INTEGER(3) to 100F, set INTEGER(4) to 1… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.6 | Columnmc2200-GESFP2LocalTXMDIX | read-write | current | GESFP2Entry Local card's LAN port Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdiX, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.7 | Columnmc2200-GESFP2RxGoodOctets | read-only | current | GESFP2Entry Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.8 | Columnmc2200-GESFP2RxBadOctets | read-only | current | GESFP Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.9 | Columnmc2200-GESFP2TxFCSErr | read-only | current | GESFP2Entry Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.10 | Columnmc2200-GESFP2RxUnicast | read-only | current | GESFP2Entry Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.11 | Columnmc2200-GESFP2TxDeferred | read-only | current | GESFP2Entry Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.12 | Columnmc2200-GESFP2RxBroadcasts | read-only | current | GESFP2Entry Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.13 | Columnmc2200-GESFP2RxMulticasts | read-only | current | GESFP2Entry Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.14 | Columnmc2200-GESFP2Rx64Octets | read-only | current | GESFP2Entry Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.15 | Columnmc2200-GESFP2Rx65to127Octets | read-only | current | GESFP2Entry Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.16 | Columnmc2200-GESFP2Rx128to255Octets | read-only | current | GESFP2Entry Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.17 | Columnmc2200-GESFP2Rx256to511Octets | read-only | current | GESFP2Entry Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.18 | Columnmc2200-GESFP2Rx512to1023Octets | read-only | current | GESFP2Entry Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.19 | Columnmc2200-GESFP2Rx1024toMaxOctets | read-only | current | GESFP2Entry Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.20 | Columnmc2200-GESFP2TxOctets | read-only | current | GESFP2Entry Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.21 | Columnmc2200-GESFP2TxUnicast | read-only | current | GESFP2Entry Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.22 | Columnmc2200-GESFP2TxExcessive | read-only | current | GESFP2Entry Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.23 | Columnmc2200-GESFP2TxMulticasts | read-only | current | GESFP2Entry Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.24 | Columnmc2200-GESFP2TxBroadcasts | read-only | current | GESFP2Entry Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.25 | Columnmc2200-GESFP2TxSingle | read-only | current | GESFP2Entry Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.26 | Columnmc2200-GESFP2TxPause | read-only | current | GESFP2Entry Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.27 | Columnmc2200-GESFP2RxPause | read-only | current | GESFP2Entry Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.28 | Columnmc2200-GESFP2TxMultiple | read-only | current | GESFP2Entry Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.29 | Columnmc2200-GESFP2RxUndersize | read-only | current | GESFP2Entry Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.30 | Columnmc2200-GESFP2RxFragments | read-only | current | GESFP2Entry Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.31 | Columnmc2200-GESFP2RxOversize | read-only | current | GESFP2Entry Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.32 | Columnmc2200-GESFP2RxJabber | read-only | current | GESFP2Entry Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.33 | Columnmc2200-GESFP2RxErr | read-only | current | GESFP2Entry Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.34 | Columnmc2200-GESFP2RxFCSErr | read-only | current | GESFP2Entry Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.35 | Columnmc2200-GESFP2TxCollisions | read-only | current | GESFP2Entry Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.36 | Columnmc2200-GESFP2TxLate | read-only | current | GESFP2Entry Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.37 | Columnmc2200-GESFP2RemoteWANSFPInfo | read-only | current | GESFP2Entry Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.38 | Columnmc2200-GESFP2RemoteWANLink | read-only | current | GESFP2Entry Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.39 | Columnmc2200-GESFP2RemotePort1Link | read-only | current | GESFP2 Remote card's port1 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.40 | Columnmc2200-GESFP2RemotePort1Speed | read-only | current | GESFP2 Remote card's port1 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.41 | Columnmc2200-GESFP2RemotePort1Duplex | read-only | current | GESFP2 Remote card's port1 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.42 | Columnmc2200-GESFP2RemotePort1Mode | read-write | current | GESFP2 Remote card's port1 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.43 | Columnmc2200-GESFP2RemotePort1MDIX | read-write | current | GESFP2 Remote card's port1 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.44 | Columnmc2200-GESFP2RemotePort2Link | read-only | current | GESFP2 Remote card's port2 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.45 | Columnmc2200-GESFP2RemotePort2Speed | read-only | current | GESFP2 Remote card's port2 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.46 | Columnmc2200-GESFP2RemotePort2Duplex | read-only | current | GESFP2 Remote card's port2 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.47 | Columnmc2200-GESFP2RemotePort2Mode | read-write | current | GESFP2 Remote card's port2 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.48 | Columnmc2200-GESFP2RemotePort2MDIX | read-write | current | GESFP2 Remote card's port2 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.49 | Columnmc2200-GESFP2RemotePort3Link | read-only | current | GESFP2 Remote card's port3 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.50 | Columnmc2200-GESFP2RemotePort3Speed | read-only | current | GESFP2 Remote card's port3 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.51 | Columnmc2200-GESFP2RemotePort3Duplex | read-only | current | GESFP2 Remote card's port3 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.52 | Columnmc2200-GESFP2RemotePort3Mode | read-write | current | GESFP2 Remote card's port3 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.53 | Columnmc2200-GESFP2RemotePort3MDIX | read-write | current | GESFP2 Remote card's port3 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.54 | Columnmc2200-GESFP2RemotePort4Link | read-only | current | GESFP2 Remote card's port4 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.55 | Columnmc2200-GESFP2RemotePort4Speed | read-only | current | GESFP2 Remote card's port4 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.56 | Columnmc2200-GESFP2RemotePort4Duplex | read-only | current | GESFP2 Remote card's port4 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.57 | Columnmc2200-GESFP2RemotePort4Mode | read-write | current | GESFP2 Remote card's port4 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.58 | Columnmc2200-GESFP2RemotePort4MDIX | read-write | current | GESFP2 Remote card's port4 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.59 | Columnmc2200-GESFP2RemotePort5Link | read-only | current | GESFP2 Remote card's port5 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.60 | Columnmc2200-GESFP2RemotePort5Speed | read-only | current | GESFP2 Remote card's port5 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.61 | Columnmc2200-GESFP2RemotePort5Duplex | read-only | current | GESFP2 Remote card's port5 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.62 | Columnmc2200-GESFP2RemotePort5Mode | read-write | current | GESFP2 Remote card's port5 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.63 | Columnmc2200-GESFP2RemotePort5MDIX | read-write | current | GESFP2 Remote card's port5 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.64 | Columnmc2200-GESFP2RemotePort6Link | read-only | current | GESFP2 Remote card's port6 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.65 | Columnmc2200-GESFP2RemotePort6Speed | read-only | current | GESFP2 Remote card's port6 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.66 | Columnmc2200-GESFP2RemotePort6Duplex | read-only | current | GESFP2 Remote card's port6 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.67 | Columnmc2200-GESFP2RemotePort6Mode | read-write | current | GESFP2 Remote card's port6 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.68 | Columnmc2200-GESFP2RemotePort6MDIX | read-write | current | GESFP2 Remote card's port6 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.69 | Columnmc2200-GESFP2RemotePort7Link | read-only | current | GESFP2 Remote card's port7 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.70 | Columnmc2200-GESFP2RemotePort7Speed | read-only | current | GESFP2 Remote card's port7 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.71 | Columnmc2200-GESFP2RemotePort7Duplex | read-only | current | GESFP2 Remote card's port7 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.72 | Columnmc2200-GESFP2RemotePort7Mode | read-write | current | GESFP2 Remote card's port7 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.73 | Columnmc2200-GESFP2RemotePort7MDIX | read-write | current | GESFP2 Remote card's port7 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.74 | Columnmc2200-GESFP2RemotePort8Link | read-only | current | GESFP2 Remote card's port8 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.75 | Columnmc2200-GESFP2RemotePort8Speed | read-only | current | GESFP2 Remote card's port8 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.76 | Columnmc2200-GESFP2RemotePort8Duplex | read-only | current | GESFP2 Remote card's port8 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.77 | Columnmc2200-GESFP2RemotePort8Mode | read-write | current | GESFP2 Remote card's port8 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to 10MHALFDUPLEX, set INTEGER(3) to 10MFULLDUPLEX, set INTEGER(4) to 100M… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.78 | Columnmc2200-GESFP2RemotePort8MDIX | read-write | current | GESFP2 Remote card's port8 Mode configuration, set INTEGER(1) to auto, set INTEGER(2) to mdi, set INTEGER(3) to mdi-X, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.79 | Columnmc2200-GESFP2RemotePort9Link | read-only | current | GESFP2 Remote card's port8 work link status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.80 | Columnmc2200-GESFP2RemotePort9Speed | read-only | current | GESFP2 Remote card's port8 work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.81 | Columnmc2200-GESFP2RemotePort9Duplex | read-only | current | GESFP2 Remote card's port8 work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.82 | Columnmc2200-GESFP2RemotePort9Mode | read-write | current | GESFP2 Remote card's port8 Mode configuration, set INTEGER(1) to 1000Xauto, set INTEGER(2) to 1000XFORCE, Ohter value is invalid |
| 1.3.6.1.4.1.28350.4.1.3.19.1.84 | Columnmc2200-GESFP2RemotePort9SFPInfo | read-only | current | GESFP2 Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.85 | Columnmc2200-GESFP2RemoteIPAddress | read-write | mandatory | The IP address to GESFP2Entry Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.86 | Columnmc2200-GESFP2RemoteSubnetMask | read-write | mandatory | The Net mask to GESFP2Entry Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.87 | Columnmc2200-GESFP2RemoteGateWay | read-write | mandatory | The gateware to GESFP2Entry Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.88 | Columnmc2200-GESFP2RemoteVLANEnable | read-write | mandatory | Enable or disable Remote GESFP2Entry IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.89 | Columnmc2200-GESFP2RemoteVID | read-write | mandatory | GESFP2Entry Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.90 | Columnmc2200-GESFP2RemoteAlarm | read-write | current | Enable or disable GESFP2Entry Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is … |
| 1.3.6.1.4.1.28350.4.1.3.19.1.91 | Columnmc2200-GESFP2Default | write-only | current | Write GESFP2 card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.92 | Columnmc2200-GESFP2Reboot | write-only | current | Reboot GESFP2Entry local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.93 | Columnmc2200-GESFP2LocalTXSpeed | read-only | mandatory | GESFP2 Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.94 | Columnmc2200-GESFP2RemoteLanIsolate | read-write | current | Enable or disable GESFP2 Media converter card remote lan isolate. set INTEGER(1) to Enable lan isolate, set INTEGER(2) to Disable lan isolate, Other value is i… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.95 | Columnmc2200-GESFP2Localportuser | read-write | current | User of GESFP2 Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.96 | Columnmc2200-GESFP2Remoteportuser1 | read-write | current | User of GESFP2 Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.97 | Columnmc2200-GESFP2Remoteportuser2 | read-write | current | User of GESFP2 Remote Port2. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.98 | Columnmc2200-GESFP2Remoteportuser3 | read-write | current | User of GESFP2 Remote Port3. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.99 | Columnmc2200-GESFP2Remoteportuser4 | read-write | current | User of GESFP2 Remote Port4. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.100 | Columnmc2200-GESFP2Remoteportuser5 | read-write | current | User of GESFP2 Remote Port5. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.101 | Columnmc2200-GESFP2Remoteportuser6 | read-write | current | User of GESFP2 Remote Port6. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.102 | Columnmc2200-GESFP2Remoteportuser7 | read-write | current | User of GESFP2 Remote Port7. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.103 | Columnmc2200-GESFP2Remoteportuser8 | read-write | current | User of GESFP2 Remote Port8. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.104 | Columnmc2200-GESFP2Remoteportuser9 | read-write | current | User of GESFP2 Remote Port9. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.105 | Columnmc2200-GESFP2LocalTXDuplex | read-only | mandatory | GESFP2 Local card's TX port work duplex status. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.106 | Columnmc2200-GESFP2WANOpticalPowerCheck | read-write | current | GESFP2 Media converter card WANOpticalPowerCheck operation. set INTEGER(1) to Enable WANOpticalPowerCheck, set INTEGER(2) to Disable WANOpticalPowerCheck, Othe… |
| 1.3.6.1.4.1.28350.4.1.3.19.1.107 | Columnmc2200-GESFP2WANThreshold | read-write | current | GESFP2 Media converter card WANThreshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.108 | Columnmc2200-GESFP2TrapFilterLocalLAN | read-write | current | Local LAN of GESFP Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.19.1.109 | Columnmc2200-GESFP2TrapFilterLocalWAN | read-write | current | Local WAN of GESFP2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.19.1.110 | Columnmc2200-GESFP2TrapFilterRemotePower | read-write | current | Remote Power of GESFP2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.19.1.111 | Columnmc2200-GESFP2TrapFilterRemoteLAN | read-write | current | Remote LAN of GESFP2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.19.1.112 | Columnmc2200-GESFP2TrapFilterRemoteWAN | read-write | current | Remote WAN of GESFP2 Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.19.1.114 | Columnmc2200-GESFP2CardType | read-only | current | GESFP2 card's Type. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.115 | Columnmc2200-GESFP2RemotePort1UpstreamBandwidth | read-write | current | GESFP2 remote card's port1 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.116 | Columnmc2200-GESFP2RemotePort1DownstreamBandwidth | read-write | current | GESFP2 remote card's port1 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.117 | Columnmc2200-GESFP2RemotePort2UpstreamBandwidth | read-write | current | GESFP2 remote card's port2 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.118 | Columnmc2200-GESFP2RemotePort2DownstreamBandwidth | read-write | current | GESFP2 remote card's port2 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.119 | Columnmc2200-GESFP2RemotePort3UpstreamBandwidth | read-write | current | GESFP2 remote card's port3 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.120 | Columnmc2200-GESFP2RemotePort3DownstreamBandwidth | read-write | current | GESFP2 remote card's port3 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.121 | Columnmc2200-GESFP2RemotePort4UpstreamBandwidth | read-write | current | GESFP2 remote card's port4 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.122 | Columnmc2200-GESFP2RemotePort4DownstreamBandwidth | read-write | current | GESFP2 remote card's port4 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.123 | Columnmc2200-GESFP2RemotePort5UpstreamBandwidth | read-write | current | GESFP2 remote card's port5 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.124 | Columnmc2200-GESFP2RemotePort5DownstreamBandwidth | read-write | current | GESFP2 remote card's port5 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.125 | Columnmc2200-GESFP2RemotePort6UpstreamBandwidth | read-write | current | GESFP2 remote card's port6 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.126 | Columnmc2200-GESFP2RemotePort6DownstreamBandwidth | read-write | current | GESFP2 remote card's port6 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.127 | Columnmc2200-GESFP2RemotePort7UpstreamBandwidth | read-write | current | GESFP2 remote card's port7 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.128 | Columnmc2200-GESFP2RemotePort7DownstreamBandwidth | read-write | current | GESFP2 remote card's port7 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.129 | Columnmc2200-GESFP2RemotePort8UpstreamBandwidth | read-write | current | GESFP2 remote card's port8 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.130 | Columnmc2200-GESFP2RemotePort8DownstreamBandwidth | read-write | current | GESFP2 remote card's port8 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.131 | Columnmc2200-GESFP2RemotePort9UpstreamBandwidth | read-write | current | GESFP2 remote card's port9 Tx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.19.1.132 | Columnmc2200-GESFP2RemotePort9DownstreamBandwidth | read-write | current | GESFP2 remote card's port9 Rx Rate. |
| 1.3.6.1.4.1.28350.4.1.3.20 | Tablemc2200-FEMCTable | not-accessible | current | Sparse table containing one entry for each FEMC 10/100Mbps Twisted-Pair to Fiber Ethernet Media Converter in the system, indexed by chassisIndex and slotIndex. |
| 1.3.6.1.4.1.28350.4.1.3.20.1 | Rowmc2200-FEMCEntry | not-accessible | current | One table entry per slot in the media converter chassis. If physical slot 'n' contains a powered FEMC media converter, then entry 'n' in this table exists and … |
| 1.3.6.1.4.1.28350.4.1.3.20.1.1 | Columnmc2200-FEMCCardIndex | read-only | current | Index to select card unit, based on local cards |
| 1.3.6.1.4.1.28350.4.1.3.20.1.2 | Columnmc2200-FEMCLocalLANSFPInfo | read-only | current | FEMC Local card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.3 | Columnmc2200-FEMCLocalLANLink | read-only | mandatory | FEMC Local card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.4 | Columnmc2200-FEMCLocalWANSFPInfo | read-only | current | FEMC Local card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.5 | Columnmc2200-FEMCLocalWANLink | read-only | current | FEMC Local card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.6 | Columnmc2200-FEMCLocalLANDownStreamBW | read-write | current | FEMC Local card's LAN port DownStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.7 | Columnmc2200-FEMCLocalLANUpStreamBW | read-write | current | FEMC Local card's LAN port UpStream BandWidth. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.8 | Columnmc2200-FEMCLocalLANMode | read-write | current | FEMC Local card's LAN port Mode configuration, set INTEGER(1) to 100Base-FX-auto, set INTEGER(2) to 100Base-full, set INTEGER(3) to 100Base-Half, set INTEGER(4… |
| 1.3.6.1.4.1.28350.4.1.3.20.1.9 | Columnmc2200-FEMCRxGoodOctets | read-only | current | FEMC Local card's LAN port MIB RxGoodOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.11 | Columnmc2200-FEMCRxBadOctets | read-only | current | FEMC Local card's LAN port MIB RxBadOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.12 | Columnmc2200-FEMCTxFCSErr | read-only | current | FEMC Local card's LAN port MIB TxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.13 | Columnmc2200-FEMCRxUnicast | read-only | current | FEMC Local card's LAN port MIB RxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.14 | Columnmc2200-FEMCTxDeferred | read-only | current | FEMC Local card's LAN port MIB TxDeferred counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.15 | Columnmc2200-FEMCRxBroadcasts | read-only | current | FEMC Local card's LAN port MIB RxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.16 | Columnmc2200-FEMCRxMulticasts | read-only | current | FEMC Local card's LAN port MIB RxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.17 | Columnmc2200-FEMCRx64Octets | read-only | current | FEMC Local card's LAN port MIB Rx64Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.18 | Columnmc2200-FEMCRx65to127Octets | read-only | current | FEMC Local card's LAN port MIB Rx65to127Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.19 | Columnmc2200-FEMCRx128to255Octets | read-only | current | FEMC Local card's LAN port MIB Rx128to255Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.20 | Columnmc2200-FEMCRx256to511Octets | read-only | current | FEMC Local card's LAN port MIB Rx256to511Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.21 | Columnmc2200-FEMCRx512to1023Octets | read-only | current | FEMC Local card's LAN port MIB Rx512to1023Octets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.22 | Columnmc2200-FEMCRx1024toMaxOctets | read-only | current | FEMC Local card's LAN port MIB Rx1024toMaxOctets counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.23 | Columnmc2200-FEMCTxOctets | read-only | current | FEMC Local card's LAN port MIB TxOctetsLow counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.25 | Columnmc2200-FEMCTxUnicast | read-only | current | FEMC Local card's LAN port MIB TxUnicast counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.26 | Columnmc2200-FEMCTxExcessive | read-only | current | FEMC Local card's LAN port MIB TxExcessive counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.27 | Columnmc2200-FEMCTxMulticasts | read-only | current | FEMC Local card's LAN port MIB TxMulticasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.28 | Columnmc2200-FEMCTxBroadcasts | read-only | current | FEMC Local card's LAN port MIB TxBroadcasts counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.29 | Columnmc2200-FEMCTxSingle | read-only | current | FEMC Local card's LAN port MIB TxSingle counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.30 | Columnmc2200-FEMCTxPause | read-only | current | FEMC Local card's LAN port MIB TxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.31 | Columnmc2200-FEMCRxPause | read-only | current | FEMC Local card's LAN port MIB RxPause counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.32 | Columnmc2200-FEMCTxMultiple | read-only | current | FEMC Local card's LAN port MIB TxMultiple counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.33 | Columnmc2200-FEMCRxUndersize | read-only | current | FEMC Local card's LAN port MIB RxUndersize counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.34 | Columnmc2200-FEMCRxFragments | read-only | current | FEMC Local card's LAN port MIB RxFragments counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.35 | Columnmc2200-FEMCRxOversize | read-only | current | FEMC Local card's LAN port MIB RxOversize counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.36 | Columnmc2200-FEMCRxJabber | read-only | current | FEMC Local card's LAN port MIB RxJabber counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.37 | Columnmc2200-FEMCRxErr | read-only | current | FEMC Local card's LAN port MIB RxErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.38 | Columnmc2200-FEMCRxFCSErr | read-only | current | FEMC Local card's LAN port MIB RxFCSErr counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.39 | Columnmc2200-FEMCTxCollisions | read-only | current | FEMC Local card's LAN port MIB TxCollisions counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.40 | Columnmc2200-FEMCTxLate | read-only | current | FEMC Local card's port8 MIB TxLate counter. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.41 | Columnmc2200-FEMCRemoteLANSFPInfo | read-only | current | FEMC Remote card's LAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.42 | Columnmc2200-FEMCRemoteLANLink | read-only | mandatory | FEMC Remote card's LAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.43 | Columnmc2200-FEMCRemoteWANSFPInfo | read-only | current | FEMC Remote card's WAN port SFP infomation. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.44 | Columnmc2200-FEMCRemoteWANLink | read-only | current | FEMC Remote card's WAN port work link status. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.45 | Columnmc2200-FEMCRemoteLANMode | read-write | current | FEMC Remote card's LAN port Mode configuration, set INTEGER(1) to 100Base-FX-auto, set INTEGER(2) to 100Base-full, set INTEGER(3) to 100Base-Half, set INTEGER(… |
| 1.3.6.1.4.1.28350.4.1.3.20.1.46 | Columnmc2200-FEMCRemoteIPAddress | read-write | mandatory | The IP address to FEMC Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.47 | Columnmc2200-FEMCRemoteSubnetMask | read-write | mandatory | The Net mask to FEMC Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.48 | Columnmc2200-FEMCRemoteGateWay | read-write | mandatory | The gateware to FEMC Remote IP ping. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.49 | Columnmc2200-FEMCRemoteVLANEnable | read-write | mandatory | Enable or disable Remote FEMC IP ping 802.1Q VLAN. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.50 | Columnmc2200-FEMCRemoteVID | read-write | mandatory | FEMC Remote IP ping 802.1Q VLAN ID. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.51 | Columnmc2200-FEMCRemoteAlarm | read-write | current | Enable or disable FEMC Media converter card remote alarm. set INTEGER(1) to Enable remote alarm, set INTEGER(2) to Disable remote alarm, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.52 | Columnmc2200-FEMCRFD | read-write | current | FEMC Media converter card remote fault detect operation. set INTEGER(1) to Enable RFD, set INTEGER(2) to Disable RFD, Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.53 | Columnmc2200-FEMCDefault | write-only | current | Write FEMC card default setting, set INTEGER(1) to write default. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.54 | Columnmc2200-FEMCReboot | write-only | current | Reboot FEMC local card, set INTEGER(1) to reboot this card. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.55 | Columnmc2200-FEMCLocalLANSpeed | read-only | mandatory | GE-MC3 Local card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.56 | Columnmc2200-FEMCRemoteLANSpeed | read-only | mandatory | GE-MC3 Remote card's LAN port work speed status. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.57 | Columnmc2200-FEMCLocalportuser | read-write | current | User of GE-MC3 Local Port1. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.58 | Columnmc2200-FEMCRemoteportuser | read-write | current | User of GE-MC3 Remote Port1. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.59 | Columnmc2200-FEMCWANOpticalPowerCheck | read-write | current | FEMC Media converter card WANOpticalPowerCheck operation. set INTEGER(1) to Enable WANOpticalPowerCheck, set INTEGER(2) to Disable WANOpticalPowerCheck, Other … |
| 1.3.6.1.4.1.28350.4.1.3.20.1.60 | Columnmc2200-FEMCWANThreshold | read-write | current | FEMC Media converter card WANThreshold operation. Other value is invalid. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.61 | Columnmc2200-FEMCTrapFilterLocalLAN | read-write | current | Local LAN of FEMC Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.20.1.62 | Columnmc2200-FEMCTrapFilterLocalWAN | read-write | current | Local WAN of FEMC Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.20.1.63 | Columnmc2200-FEMCTrapFilterRemotePower | read-write | current | Remote Power of FEMC Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.20.1.64 | Columnmc2200-FEMCTrapFilterRemoteLAN | read-write | current | Remote LAN of FEMC Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.20.1.65 | Columnmc2200-FEMCTrapFilterRemoteWAN | read-write | current | Remote WAN of FEMC Trap Filter . |
| 1.3.6.1.4.1.28350.4.1.3.20.1.66 | Columnmc2200-FEMCLoopback | read-write | mandatory | FEMC card's loopback. |
| 1.3.6.1.4.1.28350.4.1.3.20.1.67 | Columnmc2200-FEMCCardType | read-only | current | FEMC card's Type. |