PACKET-VX-BRIDGE-MIB

1440 objects

The external MIB definitions for the PacketVX Module on the BTI 7000 series products.

Imported Objects

BTI-7000-MIB	condCodeType condDateAndTime condDescription condObjectType condReportType condServiceAffecting condSeverity erpsCondNotifications eventNotifications evtCodeType evtDateAndTime evtDescription evtObjectType lagCondNotifications mstpCondNotifications mstpEvtNotifications mstpNotificationObjects performance pvxBridge pvxERPSSrvcEvtNotifications pvxERPSSrvcNNIEvtNotifications pvxESrvcBWPrflEvtNotifications pvxESrvcEvtNotifications pvxL2IntfPortIdx pvxL2IntfPortTypeIdx pvxL2IntfShelfIdx pvxL2IntfSlotIdx pvxL2IntfSubPortNumber pvxL2IntfSwitchIdx pvxObjects pvxSlaMsmtEvtNotifications pvxSUniEvtNotifications swMemberCondNotifications tcaDateAndTime tcaMontype tcaThreshold tcaValue trapSeqNum
BTI-MIB	btiModules
BTI-TC-MIB	AdminStatus CirTestResult CommandStateType CondReportType CondServiceAffecting CondSeverity FixedX100 FixedX1000 InetAddress InetAddressType InitializeCmd MonitorPeriodType OperStatus PMIntervalType PmTestCmdState PMValidity ProfileNameType ProtocolActionType PvxPortType SlaTestRole SwitchIdxType Unsigned64
SNMPv2-SMI	Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC	DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.18070.1.5	IdentitypacketVxBridgeMib			The external MIB definitions for the PacketVX Module on the BTI 7000 series products.
1.3.6.1.4.1.18070.2.2.1.6.32	TablepvxMSTPCrntPMTable	not-accessible	current	A table of current performance monitoring statistics collected for the PacketVX switch-level MSTP and MSTP instance objects.
1.3.6.1.4.1.18070.2.2.1.6.32.1	RowpvxMSTPCrntPMEntry	not-accessible	current	The row entry object of the PacketVX MSTP current performance monitoring table. Each row of this table contains a full set of MSTP PM statistics and related da…
1.3.6.1.4.1.18070.2.2.1.6.32.1.1	ColumnpvxMSTPCrntPMSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.6.32.1.2	ColumnpvxMSTPCrntPMXstIdx	not-accessible	current	The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.3	ColumnpvxMSTPCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.32.1.4	ColumnpvxMSTPCrntPMRCCCValue	read-only	current	The CIST region configuration change count. This object applies only to the global MSTP object on the switch.
1.3.6.1.4.1.18070.2.2.1.6.32.1.5	ColumnpvxMSTPCrntPMRCCCTimeStamp	read-only	current	The date and time stamp of the CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.6	ColumnpvxMSTPCrntPMRCCCValidity	read-only	current	Indicates the validity of the provided CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.7	ColumnpvxMSTPCrntPMRCCCInitialize	read-write	current	Used to initialize the value of the pvxMSTPCrntPMRCCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.8	ColumnpvxMSTPCrntPMTCCValue	read-only	current	The CIST/MSTI region configuration change count.
1.3.6.1.4.1.18070.2.2.1.6.32.1.9	ColumnpvxMSTPCrntPMTCCTimeStamp	read-only	current	The date and time stamp of the CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.10	ColumnpvxMSTPCrntPMTCCValidity	read-only	current	Indicates the validity of the provided CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.11	ColumnpvxMSTPCrntPMTCCInitialize	read-write	current	Used to initialize the value of the pvxMSTPCrntPMTCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.32.1.12	ColumnpvxMSTPCrntPMNRBCValue	read-only	current	The CIST/MSTI new root bridge count.
1.3.6.1.4.1.18070.2.2.1.6.32.1.13	ColumnpvxMSTPCrntPMNRBCTimeStamp	read-only	current	The date and time stamp of the CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.14	ColumnpvxMSTPCrntPMNRBCValidity	read-only	current	Indicates the validity of the provided CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.32.1.15	ColumnpvxMSTPCrntPMNRBCInitialize	read-write	current	Used to initialize the value of the pvxMSTPCrntPMNRBCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.33	TablepvxMSTPHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for the PacketVX switch-level MSTP and MSTP instance objects.
1.3.6.1.4.1.18070.2.2.1.6.33.1	RowpvxMSTPHistPMEntry	not-accessible	current	The row entry object of the PacketVX MSTP current performance monitoring table. Each row of this table contains a full set of MSTP PM statistics and related da…
1.3.6.1.4.1.18070.2.2.1.6.33.1.1	ColumnpvxMSTPHistPMSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.6.33.1.2	ColumnpvxMSTPHistPMXstIdx	not-accessible	current	The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.3	ColumnpvxMSTPHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.33.1.4	ColumnpvxMSTPHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.33.1.5	ColumnpvxMSTPHistPMRCCCValue	read-only	current	The CIST region configuration change count. This object applies only to the global MSTP object on the switch.
1.3.6.1.4.1.18070.2.2.1.6.33.1.6	ColumnpvxMSTPHistPMRCCCTimeStamp	read-only	current	The date and time stamp of the CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.7	ColumnpvxMSTPHistPMRCCCValidity	read-only	current	Indicates the validity of the provided CIST region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.8	ColumnpvxMSTPHistPMRCCCInitialize	read-write	current	Used to initialize the value of the pvxMSTPHistPMRCCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.9	ColumnpvxMSTPHistPMTCCValue	read-only	current	The CIST/MSTI region configuration change count.
1.3.6.1.4.1.18070.2.2.1.6.33.1.10	ColumnpvxMSTPHistPMTCCTimeStamp	read-only	current	The date and time stamp of the CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.11	ColumnpvxMSTPHistPMTCCValidity	read-only	current	Indicates the validity of the provided CIST/MSTI region configuration change count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.12	ColumnpvxMSTPHistPMTCCInitialize	read-write	current	Used to initialize the value of the pvxMSTPHistPMTCCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.33.1.13	ColumnpvxMSTPHistPMNRBCValue	read-only	current	The CIST/MSTI new root bridge count.
1.3.6.1.4.1.18070.2.2.1.6.33.1.14	ColumnpvxMSTPHistPMNRBCTimeStamp	read-only	current	The date and time stamp of the CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.15	ColumnpvxMSTPHistPMNRBCValidity	read-only	current	Indicates the validity of the provided CIST/MSTI new root bridge count value.
1.3.6.1.4.1.18070.2.2.1.6.33.1.16	ColumnpvxMSTPHistPMNRBCInitialize	read-write	current	Used to initialize the value of the pvxMSTPHistPMNRBCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34	TablepvxMSTPPortCrntPMTable	not-accessible	current	A table of current performance monitoring statistics collected for PacketVX MSTP Port and MSTP Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1	RowpvxMSTPPortCrntPMEntry	not-accessible	current	The row entry object of the PacketVX MSTP Port current performance monitoring table. Each row of this table contains a full set of PM statistics and related da…
1.3.6.1.4.1.18070.2.2.1.6.34.1.1	ColumnpvxMSTPPortCrntPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the MSTP Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.34.1.2	ColumnpvxMSTPPortCrntPMShelfIdx	not-accessible	current	The number of the shelf on which the MSTP Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.3	ColumnpvxMSTPPortCrntPMSlotIdx	not-accessible	current	The number of the slot within which the MSTP Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.4	ColumnpvxMSTPPortCrntPMTypeIdx	not-accessible	current	The type of PacketVX port on which the MSTP Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.34.1.5	ColumnpvxMSTPPortCrntPMXstIdx	not-accessible	current	The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.6	ColumnpvxMSTPPortCrntPMIdx	not-accessible	current	The number of the port of the identified type on which the PVX MSTP Port facility targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.34.1.7	ColumnpvxMSTPPortCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.34.1.8	ColumnpvxMSTPPortCrntPMFWDTRValue	read-only	current	The CIST/MSTI number of forward transitions.
1.3.6.1.4.1.18070.2.2.1.6.34.1.9	ColumnpvxMSTPPortCrntPMFWDTRTimeStamp	read-only	current	The date and time stamp of the CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.10	ColumnpvxMSTPPortCrntPMFWDTRValidity	read-only	current	Indicates the validity of the provided CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.11	ColumnpvxMSTPPortCrntPMFWDTRInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMFWDTRValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.12	ColumnpvxMSTPPortCrntPMPMCValue	read-only	current	The CIST protocol migration count. This object applies only to the global MSTP Port objects on the switch.
1.3.6.1.4.1.18070.2.2.1.6.34.1.13	ColumnpvxMSTPPortCrntPMPMCTimeStamp	read-only	current	The date and time stamp of the CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.14	ColumnpvxMSTPPortCrntPMPMCValidity	read-only	current	Indicates the validity of the provided CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.15	ColumnpvxMSTPPortCrntPMPMCInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMPMCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.16	ColumnpvxMSTPPortCrntPMBPDURXValue	read-only	current	The number of bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.34.1.17	ColumnpvxMSTPPortCrntPMBPDURXTimeStamp	read-only	current	The date and time stamp of the number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.18	ColumnpvxMSTPPortCrntPMBPDURXValidity	read-only	current	Indicates the validity of the provided number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.19	ColumnpvxMSTPPortCrntPMBPDURXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.20	ColumnpvxMSTPPortCrntPMBPDUTXValue	read-only	current	The number of bridging protocol data units transmitted.
1.3.6.1.4.1.18070.2.2.1.6.34.1.21	ColumnpvxMSTPPortCrntPMBPDUTXTimeStamp	read-only	current	The date and time stamp of the number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.22	ColumnpvxMSTPPortCrntPMBPDUTXValidity	read-only	current	Indicates the validity of the provided number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.23	ColumnpvxMSTPPortCrntPMBPDUTXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.24	ColumnpvxMSTPPortCrntPMBPDUCFGRXValue	read-only	current	The number of configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.25	ColumnpvxMSTPPortCrntPMBPDUCFGRXTimeStamp	read-only	current	The date and time stamp of the number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.26	ColumnpvxMSTPPortCrntPMBPDUCFGRXValidity	read-only	current	Indicates the validity of the provided number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.27	ColumnpvxMSTPPortCrntPMBPDUCFGRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.28	ColumnpvxMSTPPortCrntPMBPDUCFGTXValue	read-only	current	The number of configuration bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.29	ColumnpvxMSTPPortCrntPMBPDUCFGTXTimeStamp	read-only	current	The date and time stamp of the number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.30	ColumnpvxMSTPPortCrntPMBPDUCFGTXValidity	read-only	current	Indicates the validity of the provided number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.31	ColumnpvxMSTPPortCrntPMBPDUCFGTXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDUCFGTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.32	ColumnpvxMSTPPortCrntPMBPDUTCNRXValue	read-only	current	The number of topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.33	ColumnpvxMSTPPortCrntPMBPDUTCNRXTimeStamp	read-only	current	The date and time stamp of the number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.34	ColumnpvxMSTPPortCrntPMBPDUTCNRXValidity	read-only	current	Indicates the validity of the provided number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.35	ColumnpvxMSTPPortCrntPMBPDUTCNRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.36	ColumnpvxMSTPPortCrntPMBPDUTCNTXValue	read-only	current	The number of topology change notifications bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.37	ColumnpvxMSTPPortCrntPMBPDUTCNTXTimeStamp	read-only	current	The date and time stamp of the number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.38	ColumnpvxMSTPPortCrntPMBPDUTCNTXValidity	read-only	current	Indicates the validity of the provided number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.39	ColumnpvxMSTPPortCrntPMBPDUTCNTXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDUTCNTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.40	ColumnpvxMSTPPortCrntPMINVBPDURXValue	read-only	current	The number of invalid bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.34.1.41	ColumnpvxMSTPPortCrntPMINVBPDURXTimeStamp	read-only	current	The date and time stamp of the number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.42	ColumnpvxMSTPPortCrntPMINVBPDURXValidity	read-only	current	Indicates the validity of the provided number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.43	ColumnpvxMSTPPortCrntPMINVBPDURXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.44	ColumnpvxMSTPPortCrntPMINVBPDUCFGRXValue	read-only	current	The number of invalid configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.45	ColumnpvxMSTPPortCrntPMINVBPDUCFGRXTimeStamp	read-only	current	The date and time stamp of the number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.46	ColumnpvxMSTPPortCrntPMINVBPDUCFGRXValidity	read-only	current	Indicates the validity of the provided number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.47	ColumnpvxMSTPPortCrntPMINVBPDUCFGRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMINVBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.34.1.48	ColumnpvxMSTPPortCrntPMINVBPDUTCNRXValue	read-only	current	The number of invalid topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.34.1.49	ColumnpvxMSTPPortCrntPMINVBPDUTCNRXTimeStamp	read-only	current	The date and time stamp of the number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.50	ColumnpvxMSTPPortCrntPMINVBPDUTCNRXValidity	read-only	current	Indicates the validity of the provided number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.34.1.51	ColumnpvxMSTPPortCrntPMINVBPDUTCNRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortCrntPMINVBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35	TablepvxMSTPPortHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for PacketVX MSTP Port and MSTP Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1	RowpvxMSTPPortHistPMEntry	not-accessible	current	The row entry object of the PacketVX MSTP Port historical performance monitoring table. Each row of this table contains a full set of PM statistics and related…
1.3.6.1.4.1.18070.2.2.1.6.35.1.1	ColumnpvxMSTPPortHistPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the MSTP Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.35.1.2	ColumnpvxMSTPPortHistPMShelfIdx	not-accessible	current	The number of the shelf on which the MSTP Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.3	ColumnpvxMSTPPortHistPMSlotIdx	not-accessible	current	The number of the slot within which the MSTP Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.4	ColumnpvxMSTPPortHistPMTypeIdx	not-accessible	current	The type of PacketVX port on which the MSTP Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.35.1.5	ColumnpvxMSTPPortHistPMXstIdx	not-accessible	current	The instance number of the MSTP instance. For the global MSTP object on the switch, this index object is set to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.6	ColumnpvxMSTPPortHistPMIdx	not-accessible	current	The number of the port of the identified type on which the PVX MSTP Port facility targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.35.1.7	ColumnpvxMSTPPortHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.35.1.8	ColumnpvxMSTPPortHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.35.1.9	ColumnpvxMSTPPortHistPMFWDTRValue	read-only	current	The CIST/MSTI number of forward transitions.
1.3.6.1.4.1.18070.2.2.1.6.35.1.10	ColumnpvxMSTPPortHistPMFWDTRTimeStamp	read-only	current	The date and time stamp of the CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.11	ColumnpvxMSTPPortHistPMFWDTRValidity	read-only	current	Indicates the validity of the provided CIST/MSTI number of forward transitions value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.12	ColumnpvxMSTPPortHistPMFWDTRInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMFWDTRValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.13	ColumnpvxMSTPPortHistPMPMCValue	read-only	current	The CIST protocol migration count. This object applies only to the global MSTP Port objects on the switch.
1.3.6.1.4.1.18070.2.2.1.6.35.1.14	ColumnpvxMSTPPortHistPMPMCTimeStamp	read-only	current	The date and time stamp of the CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.15	ColumnpvxMSTPPortHistPMPMCValidity	read-only	current	Indicates the validity of the provided CIST protocol migration count value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.16	ColumnpvxMSTPPortHistPMPMCInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMPMCValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.17	ColumnpvxMSTPPortHistPMBPDURXValue	read-only	current	The number of bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.35.1.18	ColumnpvxMSTPPortHistPMBPDURXTimeStamp	read-only	current	The date and time stamp of the number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.19	ColumnpvxMSTPPortHistPMBPDURXValidity	read-only	current	Indicates the validity of the provided number of bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.20	ColumnpvxMSTPPortHistPMBPDURXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.21	ColumnpvxMSTPPortHistPMBPDUTXValue	read-only	current	The number of bridging protocol data units transmitted.
1.3.6.1.4.1.18070.2.2.1.6.35.1.22	ColumnpvxMSTPPortHistPMBPDUTXTimeStamp	read-only	current	The date and time stamp of the number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.23	ColumnpvxMSTPPortHistPMBPDUTXValidity	read-only	current	Indicates the validity of the provided number of bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.24	ColumnpvxMSTPPortHistPMBPDUTXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.25	ColumnpvxMSTPPortHistPMBPDUCFGRXValue	read-only	current	The number of configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.26	ColumnpvxMSTPPortHistPMBPDUCFGRXTimeStamp	read-only	current	The date and time stamp of the number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.27	ColumnpvxMSTPPortHistPMBPDUCFGRXValidity	read-only	current	Indicates the validity of the provided number of configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.28	ColumnpvxMSTPPortHistPMBPDUCFGRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.29	ColumnpvxMSTPPortHistPMBPDUCFGTXValue	read-only	current	The number of configuration bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.30	ColumnpvxMSTPPortHistPMBPDUCFGTXTimeStamp	read-only	current	The date and time stamp of the number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.31	ColumnpvxMSTPPortHistPMBPDUCFGTXValidity	read-only	current	Indicates the validity of the provided number of configuration bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.32	ColumnpvxMSTPPortHistPMBPDUCFGTXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDUCFGTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.33	ColumnpvxMSTPPortHistPMBPDUTCNRXValue	read-only	current	The number of topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.34	ColumnpvxMSTPPortHistPMBPDUTCNRXTimeStamp	read-only	current	The date and time stamp of the number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.35	ColumnpvxMSTPPortHistPMBPDUTCNRXValidity	read-only	current	Indicates the validity of the provided number of topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.36	ColumnpvxMSTPPortHistPMBPDUTCNRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.37	ColumnpvxMSTPPortHistPMBPDUTCNTXValue	read-only	current	The number of topology change notifications bridging protocol data units transmitted. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.38	ColumnpvxMSTPPortHistPMBPDUTCNTXTimeStamp	read-only	current	The date and time stamp of the number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.39	ColumnpvxMSTPPortHistPMBPDUTCNTXValidity	read-only	current	Indicates the validity of the provided number of topology change notifications bridging protocol data units transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.40	ColumnpvxMSTPPortHistPMBPDUTCNTXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDUTCNTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.41	ColumnpvxMSTPPortHistPMINVBPDURXValue	read-only	current	The number of invalid bridging protocol data units received.
1.3.6.1.4.1.18070.2.2.1.6.35.1.42	ColumnpvxMSTPPortHistPMINVBPDURXTimeStamp	read-only	current	The date and time stamp of the number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.43	ColumnpvxMSTPPortHistPMINVBPDURXValidity	read-only	current	Indicates the validity of the provided number of invalid bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.44	ColumnpvxMSTPPortHistPMINVBPDURXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMBPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.45	ColumnpvxMSTPPortHistPMINVBPDUCFGRXValue	read-only	current	The number of invalid configuration bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.46	ColumnpvxMSTPPortHistPMINVBPDUCFGRXTimeStamp	read-only	current	The date and time stamp of the number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.47	ColumnpvxMSTPPortHistPMINVBPDUCFGRXValidity	read-only	current	Indicates the validity of the provided number of invalid configuration bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.48	ColumnpvxMSTPPortHistPMINVBPDUCFGRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMINVBPDUCFGRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.35.1.49	ColumnpvxMSTPPortHistPMINVBPDUTCNRXValue	read-only	current	The number of invalid topology change notifications bridging protocol data units received. This object applies only to the global MSTP Port objects.
1.3.6.1.4.1.18070.2.2.1.6.35.1.50	ColumnpvxMSTPPortHistPMINVBPDUTCNRXTimeStamp	read-only	current	The date and time stamp of the number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.51	ColumnpvxMSTPPortHistPMINVBPDUTCNRXValidity	read-only	current	Indicates the validity of the provided number of invalid topology change notifications bridging protocol data units received value.
1.3.6.1.4.1.18070.2.2.1.6.35.1.52	ColumnpvxMSTPPortHistPMINVBPDUTCNRXInitialize	read-write	current	Used to initialize the value of the pvxMSTPPortHistPMINVBPDUTCNRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36	TablepvxLAGPortCrntPMTable	not-accessible	current	A table of current performance monitoring statistics collected for the PacketVX LAG port interfaces on the NE.
1.3.6.1.4.1.18070.2.2.1.6.36.1	RowpvxLAGPortCrntPMEntry	not-accessible	current	The row entry object of the PacketVX LAG port current performance monitoring table. Each row of this table contains a full set of PM statistics and related dat…
1.3.6.1.4.1.18070.2.2.1.6.36.1.1	ColumnpvxLAGPortCrntPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the PVX LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.36.1.2	ColumnpvxLAGPortCrntPMShelfIdx	not-accessible	current	The number of the shelf on which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.3	ColumnpvxLAGPortCrntPMSlotIdx	not-accessible	current	The number of the slot within which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.4	ColumnpvxLAGPortCrntPMTypeIdx	not-accessible	current	The type of PacketVX port on which the LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.36.1.5	ColumnpvxLAGPortCrntPMIdx	not-accessible	current	The number of the port of the identified type on which the PVX LAG port targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.36.1.6	ColumnpvxLAGPortCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.36.1.7	ColumnpvxLAGPortCrntPMLACPDURXValue	read-only	current	The total Link Access Control PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.8	ColumnpvxLAGPortCrntPMLACPDURXTimeStamp	read-only	current	The date and time stamp of the total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.9	ColumnpvxLAGPortCrntPMLACPDURXValidity	read-only	current	Indicates the validity of the provided total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.10	ColumnpvxLAGPortCrntPMLACPDURXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMLACPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.11	ColumnpvxLAGPortCrntPMMRKPDURXValue	read-only	current	The count of Marker PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.12	ColumnpvxLAGPortCrntPMMRKPDURXTimeStamp	read-only	current	The date and time stamp of the Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.13	ColumnpvxLAGPortCrntPMMRKPDURXValidity	read-only	current	Indicates the validity of the provided Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.14	ColumnpvxLAGPortCrntPMMRKPDURXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMMRKPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.15	ColumnpvxLAGPortCrntPMMRKRSPPDURXValue	read-only	current	The count of Marker Response PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.16	ColumnpvxLAGPortCrntPMMRKRSPPDURXTimeStamp	read-only	current	The date and time stamp of the Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.17	ColumnpvxLAGPortCrntPMMRKRSPPDURXValidity	read-only	current	Indicates the validity of the provided Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.18	ColumnpvxLAGPortCrntPMMRKRSPPDURXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMMRKPDURSPRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.19	ColumnpvxLAGPortCrntPMINVLACFRRXValue	read-only	current	The count of invalid Link Access Control frames received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.20	ColumnpvxLAGPortCrntPMINVLACFRRXTimeStamp	read-only	current	The date and time stamp of the count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.21	ColumnpvxLAGPortCrntPMINVLACFRRXValidity	read-only	current	Indicates the validity of the provided count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.22	ColumnpvxLAGPortCrntPMINVLACFRRXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMINVLACFRRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.23	ColumnpvxLAGPortCrntPMLACPDUTXValue	read-only	current	The total Link Access Control PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.24	ColumnpvxLAGPortCrntPMLACPDUTXTimeStamp	read-only	current	The date and time stamp of the total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.25	ColumnpvxLAGPortCrntPMLACPDUTXValidity	read-only	current	Indicates the validity of the provided total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.26	ColumnpvxLAGPortCrntPMLACPDUTXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMLACPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.27	ColumnpvxLAGPortCrntPMMRKPDUTXValue	read-only	current	The count of Marker PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.28	ColumnpvxLAGPortCrntPMMRKPDUTXTimeStamp	read-only	current	The date and time stamp of the Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.29	ColumnpvxLAGPortCrntPMMRKPDUTXValidity	read-only	current	Indicates the validity of the provided Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.30	ColumnpvxLAGPortCrntPMMRKPDUTXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMMRKPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.36.1.31	ColumnpvxLAGPortCrntPMMRKRSPPDUTXValue	read-only	current	The count of Marker Response PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.36.1.32	ColumnpvxLAGPortCrntPMMRKRSPPDUTXTimeStamp	read-only	current	The date and time stamp of the Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.33	ColumnpvxLAGPortCrntPMMRKRSPPDUTXValidity	read-only	current	Indicates the validity of the provided Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.36.1.34	ColumnpvxLAGPortCrntPMMRKRSPPDUTXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortCrntPMMRKPDURSPTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37	TablepvxLAGPortHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for the PacketVX LAG port interfaces on the NE.
1.3.6.1.4.1.18070.2.2.1.6.37.1	RowpvxLAGPortHistPMEntry	not-accessible	current	The row entry object of the PacketVX LAG port historical performance monitoring table. Each row of this table contains a full set of PM statistics and related …
1.3.6.1.4.1.18070.2.2.1.6.37.1.1	ColumnpvxLAGPortHistPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the PVX LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.37.1.2	ColumnpvxLAGPortHistPMShelfIdx	not-accessible	current	The number of the shelf on which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.3	ColumnpvxLAGPortHistPMSlotIdx	not-accessible	current	The number of the slot within which the PVX LAG port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.4	ColumnpvxLAGPortHistPMTypeIdx	not-accessible	current	The type of PacketVX port on which the LAG port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.37.1.5	ColumnpvxLAGPortHistPMIdx	not-accessible	current	The number of the port of the identified type on which the PVX LAG port targeted for PMs is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.37.1.6	ColumnpvxLAGPortHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.37.1.7	ColumnpvxLAGPortHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.37.1.8	ColumnpvxLAGPortHistPMLACPDURXValue	read-only	current	The total Link Access Control PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.9	ColumnpvxLAGPortHistPMLACPDURXTimeStamp	read-only	current	The date and time stamp of the total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.10	ColumnpvxLAGPortHistPMLACPDURXValidity	read-only	current	Indicates the validity of the provided total Link Access Control PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.11	ColumnpvxLAGPortHistPMLACPDURXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMLACPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.12	ColumnpvxLAGPortHistPMMRKPDURXValue	read-only	current	The count of Marker PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.13	ColumnpvxLAGPortHistPMMRKPDURXTimeStamp	read-only	current	The date and time stamp of the Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.14	ColumnpvxLAGPortHistPMMRKPDURXValidity	read-only	current	Indicates the validity of the provided Marker PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.15	ColumnpvxLAGPortHistPMMRKPDURXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMMRKPDURXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.16	ColumnpvxLAGPortHistPMMRKRSPPDURXValue	read-only	current	The count of Marker Response PDUs received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.17	ColumnpvxLAGPortHistPMMRKRSPPDURXTimeStamp	read-only	current	The date and time stamp of the Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.18	ColumnpvxLAGPortHistPMMRKRSPPDURXValidity	read-only	current	Indicates the validity of the provided Marker Response PDUs received value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.19	ColumnpvxLAGPortHistPMMRKRSPPDURXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMMRKPDURSPRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.20	ColumnpvxLAGPortHistPMINVLACFRRXValue	read-only	current	The count of invalid Link Access Control frames received on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.21	ColumnpvxLAGPortHistPMINVLACFRRXTimeStamp	read-only	current	The date and time stamp of the count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.22	ColumnpvxLAGPortHistPMINVLACFRRXValidity	read-only	current	Indicates the validity of the provided count of invalid Link Access Control frames value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.23	ColumnpvxLAGPortHistPMINVLACFRRXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMINVLACFRRXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.24	ColumnpvxLAGPortHistPMLACPDUTXValue	read-only	current	The total Link Access Control PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.25	ColumnpvxLAGPortHistPMLACPDUTXTimeStamp	read-only	current	The date and time stamp of the total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.26	ColumnpvxLAGPortHistPMLACPDUTXValidity	read-only	current	Indicates the validity of the provided total Link Access Control PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.27	ColumnpvxLAGPortHistPMLACPDUTXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMLACPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.28	ColumnpvxLAGPortHistPMMRKPDUTXValue	read-only	current	The count of Marker PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.29	ColumnpvxLAGPortHistPMMRKPDUTXTimeStamp	read-only	current	The date and time stamp of the Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.30	ColumnpvxLAGPortHistPMMRKPDUTXValidity	read-only	current	Indicates the validity of the provided Marker PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.31	ColumnpvxLAGPortHistPMMRKPDUTXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMMRKPDUTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.37.1.32	ColumnpvxLAGPortHistPMMRKRSPPDUTXValue	read-only	current	The count of Marker Response PDUs transmitted on the LAG port.
1.3.6.1.4.1.18070.2.2.1.6.37.1.33	ColumnpvxLAGPortHistPMMRKRSPPDUTXTimeStamp	read-only	current	The date and time stamp of the Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.34	ColumnpvxLAGPortHistPMMRKRSPPDUTXValidity	read-only	current	Indicates the validity of the provided Marker Response PDUs transmitted value.
1.3.6.1.4.1.18070.2.2.1.6.37.1.35	ColumnpvxLAGPortHistPMMRKRSPPDUTXInitialize	read-write	current	Used to initialize the value of the pvxLAGPortHistPMMRKPDURSPTXValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.40	TablepvxESrvcCrntPMTable	not-accessible	current	A table of current performance monitoring statistics collected for the PacketVX ethernet services objects.
1.3.6.1.4.1.18070.2.2.1.6.40.1	RowpvxESrvcCrntPMEntry	not-accessible	current	The row entry object of the PacketVX ethernet services current performance monitoring table. Each row of this table contains a full set of PM statistics and re…
1.3.6.1.4.1.18070.2.2.1.6.40.1.1	ColumnpvxESrvcCrntPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the ethernet service is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.40.1.2	ColumnpvxESrvcCrntPMESrvcNameIdx	not-accessible	current	The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.40.1.3	ColumnpvxESrvcCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.40.1.4	ColumnpvxESrvcCrntPMUASValue	read-write	current	The count of unavailable seconds for the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.40.1.5	ColumnpvxESrvcCrntPMUASTimeStamp	read-only	current	The date and time stamp of the ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.40.1.6	ColumnpvxESrvcCrntPMUASValidity	read-only	current	Indicates the validity of the provided ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.40.1.7	ColumnpvxESrvcCrntPMUASInitialize	read-write	current	Used to initialize the value of the pvxESrvcCrntPMUASValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.41	TablepvxESrvcHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for the PacketVX ethernet services objects.
1.3.6.1.4.1.18070.2.2.1.6.41.1	RowpvxESrvcHistPMEntry	not-accessible	current	The row entry object of the PacketVX ethernet services historical performance monitoring table. Each row of this table contains a full set of PM statistics and…
1.3.6.1.4.1.18070.2.2.1.6.41.1.1	ColumnpvxESrvcHistPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the ethernet service is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.41.1.2	ColumnpvxESrvcHistPMESrvcNameIdx	not-accessible	current	The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.41.1.3	ColumnpvxESrvcHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.41.1.4	ColumnpvxESrvcHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.41.1.5	ColumnpvxESrvcHistPMUASValue	read-write	current	The count of unavailable seconds for the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.41.1.6	ColumnpvxESrvcHistPMUASTimeStamp	read-only	current	The date and time stamp of the ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.41.1.7	ColumnpvxESrvcHistPMUASValidity	read-only	current	Indicates the validity of the provided ethernet service unavailable seconds count value.
1.3.6.1.4.1.18070.2.2.1.6.41.1.8	ColumnpvxESrvcHistPMUASInitialize	read-write	current	Used to initialize the value of the pvxESrvcHistPMUASValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42	TablepvxESrvcBWPrflCrntPMTable	not-accessible	current	A table of current performance monitoring statistics collected for the PacketVX perEVC and perCoS objects.
1.3.6.1.4.1.18070.2.2.1.6.42.1	RowpvxESrvcBWPrflCrntPMEntry	not-accessible	current	The row entry object of the PacketVX ethernet services bandwidth profile current performance monitoring table. Each row of this table contains a full set of PM…
1.3.6.1.4.1.18070.2.2.1.6.42.1.1	ColumnpvxESrvcBWPrflCrntPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.2	ColumnpvxESrvcBWPrflCrntPMShelfIdx	not-accessible	current	The number of the shelf on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.3	ColumnpvxESrvcBWPrflCrntPMSlotIdx	not-accessible	current	The number of the slot on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.4	ColumnpvxESrvcBWPrflCrntPMPortTypeIdx	not-accessible	current	The type of PacketVX port on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.5	ColumnpvxESrvcBWPrflCrntPMPortIdx	not-accessible	current	The number of the port of the identified type on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.42.1.6	ColumnpvxESrvcBWPrflCrntPMESrvcNameIdx	not-accessible	current	The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.7	ColumnpvxESrvcBWPrflCrntPMPlcyNameIdx	not-accessible	current	The name of the policy.
1.3.6.1.4.1.18070.2.2.1.6.42.1.8	ColumnpvxESrvcBWPrflCrntPMClsMapNameIdx	not-accessible	current	The name of the class map.
1.3.6.1.4.1.18070.2.2.1.6.42.1.9	ColumnpvxESrvcBWPrflCrntPMDirectionIdx	not-accessible	current	The direction of traffic of the monitored object.
1.3.6.1.4.1.18070.2.2.1.6.42.1.10	ColumnpvxESrvcBWPrflCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.42.1.11	ColumnpvxESrvcBWPrflCrntPMOctetsTotalValue	read-only	current	The total count of octets received or transmitted for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.12	ColumnpvxESrvcBWPrflCrntPMOctetsTotalTimeStamp	read-only	current	The date and time stamp of the total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.13	ColumnpvxESrvcBWPrflCrntPMOctetsTotalValidity	read-only	current	Indicates the validity of the provided total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.14	ColumnpvxESrvcBWPrflCrntPMOctetsTotalInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflCrntPMOctetsTotalValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.15	ColumnpvxESrvcBWPrflCrntPMOctetsVltValue	read-only	current	The count of octets violate for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.16	ColumnpvxESrvcBWPrflCrntPMOctetsVltTimeStamp	read-only	current	The date and time stamp of the octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.17	ColumnpvxESrvcBWPrflCrntPMOctetsVltValidity	read-only	current	Indicates the validity of the provided octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.18	ColumnpvxESrvcBWPrflCrntPMOctetsVltInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflCrntPMOctetsVltValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.19	ColumnpvxESrvcBWPrflCrntPMOctetsCnfExcValue	read-only	current	The count of octets conform and exceeded for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.20	ColumnpvxESrvcBWPrflCrntPMOctetsCnfExcTimeStamp	read-only	current	The date and time stamp of the octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.21	ColumnpvxESrvcBWPrflCrntPMOctetsCnfExcValidity	read-only	current	Indicates the validity of the provided octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.22	ColumnpvxESrvcBWPrflCrntPMOctetsCnfExcInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflCrntPMOctetsCnfExcValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.42.1.23	ColumnpvxESrvcBWPrflCrntPMBDWUtlzValue	read-write	current	The bandwidth utilization of the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.42.1.24	ColumnpvxESrvcBWPrflCrntPMBDWUtlzTimeStamp	read-only	current	The date and time stamp of the bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.25	ColumnpvxESrvcBWPrflCrntPMBDWUtlzValidity	read-only	current	Indicates the validity of the provided bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.42.1.26	ColumnpvxESrvcBWPrflCrntPMBDWUtlzInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflCrntPMBDWUtlzValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43	TablepvxESrvcBWPrflHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for the PacketVX perEVC and perCoS objects.
1.3.6.1.4.1.18070.2.2.1.6.43.1	RowpvxESrvcBWPrflHistPMEntry	not-accessible	current	The row entry object of the PacketVX ethernet services bandwidth profile historical performance monitoring table. Each row of this table contains a full set of…
1.3.6.1.4.1.18070.2.2.1.6.43.1.1	ColumnpvxESrvcBWPrflHistPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.2	ColumnpvxESrvcBWPrflHistPMShelfIdx	not-accessible	current	The number of the shelf on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.3	ColumnpvxESrvcBWPrflHistPMSlotIdx	not-accessible	current	The number of the slot on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.4	ColumnpvxESrvcBWPrflHistPMPortTypeIdx	not-accessible	current	The type of PacketVX port on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.5	ColumnpvxESrvcBWPrflHistPMPortIdx	not-accessible	current	The number of the port of the identified type on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.43.1.6	ColumnpvxESrvcBWPrflHistPMESrvcNameIdx	not-accessible	current	The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.7	ColumnpvxESrvcBWPrflHistPMPlcyNameIdx	not-accessible	current	The name of the policy.
1.3.6.1.4.1.18070.2.2.1.6.43.1.8	ColumnpvxESrvcBWPrflHistPMClsMapNameIdx	not-accessible	current	The name of the class map.
1.3.6.1.4.1.18070.2.2.1.6.43.1.9	ColumnpvxESrvcBWPrflHistPMDirectionIdx	not-accessible	current	The direction of traffic of the monitored object.
1.3.6.1.4.1.18070.2.2.1.6.43.1.10	ColumnpvxESrvcBWPrflHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.43.1.11	ColumnpvxESrvcBWPrflHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.43.1.12	ColumnpvxESrvcBWPrflHistPMOctetsTotalValue	read-only	current	The total count of octets received or transmitted for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.13	ColumnpvxESrvcBWPrflHistPMOctetsTotalTimeStamp	read-only	current	The date and time stamp of the total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.14	ColumnpvxESrvcBWPrflHistPMOctetsTotalValidity	read-only	current	Indicates the validity of the provided total octets count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.15	ColumnpvxESrvcBWPrflHistPMOctetsTotalInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflHistPMOctetsTotalValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.16	ColumnpvxESrvcBWPrflHistPMOctetsVltValue	read-only	current	The count of octets violate for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.17	ColumnpvxESrvcBWPrflHistPMOctetsVltTimeStamp	read-only	current	The date and time stamp of the octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.18	ColumnpvxESrvcBWPrflHistPMOctetsVltValidity	read-only	current	Indicates the validity of the provided octets violate count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.19	ColumnpvxESrvcBWPrflHistPMOctetsVltInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflHistPMOctetsVltValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.20	ColumnpvxESrvcBWPrflHistPMOctetsCnfExcValue	read-only	current	The count of octets conform and exceeded for the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.21	ColumnpvxESrvcBWPrflHistPMOctetsCnfExcTimeStamp	read-only	current	The date and time stamp of the octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.22	ColumnpvxESrvcBWPrflHistPMOctetsCnfExcValidity	read-only	current	Indicates the validity of the provided octets conform and exceeded count value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.23	ColumnpvxESrvcBWPrflHistPMOctetsCnfExcInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflHistPMOctetsCnfExcValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.43.1.24	ColumnpvxESrvcBWPrflHistPMBDWUtlzValue	read-write	current	The bandwidth utilization of the monitored service.
1.3.6.1.4.1.18070.2.2.1.6.43.1.25	ColumnpvxESrvcBWPrflHistPMBDWUtlzTimeStamp	read-only	current	The date and time stamp of the bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.26	ColumnpvxESrvcBWPrflHistPMBDWUtlzValidity	read-only	current	Indicates the validity of the provided bandwidth utilization value.
1.3.6.1.4.1.18070.2.2.1.6.43.1.27	ColumnpvxESrvcBWPrflHistPMBDWUtlzInitialize	read-write	current	Used to initialize the value of the pvxESrvcBWPrflHistPMBDWUtlzValue object to 0.
1.3.6.1.4.1.18070.2.2.1.6.44	TablepvxESrvcBWPrflPMThresholdTable	not-accessible	current	A table of threshold levels for monitored parameters which support threshold crossing alerts on PacketVX perEVC and perCoS objects.
1.3.6.1.4.1.18070.2.2.1.6.44.1	RowpvxESrvcBWPrflPMThresholdEntry	not-accessible	current	The row entry object of the PVX Ethernet Service Bandwidth Profile performance monitoring threshold table. Each row of this table contains a set of PM threshol…
1.3.6.1.4.1.18070.2.2.1.6.44.1.1	ColumnpvxESrvcBWPrflPMThresholdSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.2	ColumnpvxESrvcBWPrflPMThresholdShelfIdx	not-accessible	current	The number of the shelf on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.3	ColumnpvxESrvcBWPrflPMThresholdSlotIdx	not-accessible	current	The number of the slot on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.4	ColumnpvxESrvcBWPrflPMThresholdPortTypeIdx	not-accessible	current	The type of PacketVX port on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.5	ColumnpvxESrvcBWPrflPMThresholdPortIdx	not-accessible	current	The number of the port of the identified type on which the monitored object is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.44.1.6	ColumnpvxESrvcBWPrflPMThresholdESrvcNameIdx	not-accessible	current	The name of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.6.44.1.7	ColumnpvxESrvcBWPrflPMThresholdPlcyNameIdx	not-accessible	current	The name of the policy.
1.3.6.1.4.1.18070.2.2.1.6.44.1.8	ColumnpvxESrvcBWPrflPMThresholdClsMapNameIdx	not-accessible	current	The name of the class map.
1.3.6.1.4.1.18070.2.2.1.6.44.1.9	ColumnpvxESrvcBWPrflPMThresholdDirectionIdx	not-accessible	current	The direction of traffic of the monitored object.
1.3.6.1.4.1.18070.2.2.1.6.44.1.10	ColumnpvxESrvcBWPrflPMThresholdLevelTypeIdx	not-accessible	current	Identifies the specific PM threshold according to interval length and level criticality.
1.3.6.1.4.1.18070.2.2.1.6.44.1.11	ColumnpvxESrvcBWPrflPMThresholdBDWUtlzValue	read-write	current	The threshold for the bandwidth utilization.
1.3.6.1.4.1.18070.2.2.1.6.45	TablepvxERPSPortCrntPMTable	not-accessible	current	A table of current performance monitoring statistics collected for PacketVX ERPS Port
1.3.6.1.4.1.18070.2.2.1.6.45.1	RowpvxERPSPortCrntPMEntry	not-accessible	current	The row entry object of the PacketVX ERPS Port current performance monitoring table. Each row of this table contains a full set of PM statistics and related da…
1.3.6.1.4.1.18070.2.2.1.6.45.1.1	ColumnpvxERPSPortCrntPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the ERPS Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.45.1.2	ColumnpvxERPSPortCrntPMShelfIdx	not-accessible	current	The number of the shelf on which the ERPS Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.3	ColumnpvxERPSPortCrntPMSlotIdx	not-accessible	current	The number of the slot within which the ERPS Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.4	ColumnpvxERPSPortCrntPMTypeIdx	not-accessible	current	The type of PacketVX port on which the ERPS Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.45.1.5	ColumnpvxERPSPortCrntPMPortIdx	not-accessible	current	The port number for the ERPS Port
1.3.6.1.4.1.18070.2.2.1.6.45.1.6	ColumnpvxERPSPortCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.45.1.7	ColumnpvxERPSPortCrntPMPduTxValue	read-only	current	The Number of PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.8	ColumnpvxERPSPortCrntPMPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.9	ColumnpvxERPSPortCrntPMPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.10	ColumnpvxERPSPortCrntPMPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.11	ColumnpvxERPSPortCrntPMPduRxValue	read-only	current	The number of PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.12	ColumnpvxERPSPortCrntPMPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.13	ColumnpvxERPSPortCrntPMPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.14	ColumnpvxERPSPortCrntPMPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.15	ColumnpvxERPSPortCrntPMPduDiscardValue	read-only	current	The number of PDUs discarded on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.16	ColumnpvxERPSPortCrntPMPduDiscardTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.17	ColumnpvxERPSPortCrntPMPduDiscardValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.18	ColumnpvxERPSPortCrntPMPduDiscardInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.19	ColumnpvxERPSPortCrntPMBlockedValue	read-only	current	The number of times this port has transitioned to blocked state
1.3.6.1.4.1.18070.2.2.1.6.45.1.20	ColumnpvxERPSPortCrntPMBlockedTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.21	ColumnpvxERPSPortCrntPMBlockedValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.22	ColumnpvxERPSPortCrntPMBlockedInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.23	ColumnpvxERPSPortCrntPMUnblockedValue	read-only	current	The number of times this port has transitioned to unblocked state
1.3.6.1.4.1.18070.2.2.1.6.45.1.24	ColumnpvxERPSPortCrntPMUnblockedTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.25	ColumnpvxERPSPortCrntPMUnblockedValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.26	ColumnpvxERPSPortCrntPMUnblockedInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.27	ColumnpvxERPSPortCrntPMFailuresValue	read-only	current	The number of times this port has transitioned to failed state
1.3.6.1.4.1.18070.2.2.1.6.45.1.28	ColumnpvxERPSPortCrntPMFailuresTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.29	ColumnpvxERPSPortCrntPMFailuresValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.30	ColumnpvxERPSPortCrntPMFailuresInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.31	ColumnpvxERPSPortCrntPMRecoveriesValue	read-only	current	The number of times this port has recovered from failed state
1.3.6.1.4.1.18070.2.2.1.6.45.1.32	ColumnpvxERPSPortCrntPMRecoveriesTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.33	ColumnpvxERPSPortCrntPMRecoveriesValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.34	ColumnpvxERPSPortCrntPMRecoveriesInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.35	ColumnpvxERPSPortCrntPMNrPduTxValue	read-only	current	The Number of NR PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.36	ColumnpvxERPSPortCrntPMNrPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.37	ColumnpvxERPSPortCrntPMNrPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.38	ColumnpvxERPSPortCrntPMNrPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.39	ColumnpvxERPSPortCrntPMNrPduRxValue	read-only	current	The number of NR PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.40	ColumnpvxERPSPortCrntPMNrPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.41	ColumnpvxERPSPortCrntPMNrPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.42	ColumnpvxERPSPortCrntPMNrPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.43	ColumnpvxERPSPortCrntPMNrrbPduTxValue	read-only	current	The Number of NRRB PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.44	ColumnpvxERPSPortCrntPMNrrbPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.45	ColumnpvxERPSPortCrntPMNrrbPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.46	ColumnpvxERPSPortCrntPMNrrbPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.47	ColumnpvxERPSPortCrntPMNrrbPduRxValue	read-only	current	The number of NRRB PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.48	ColumnpvxERPSPortCrntPMNrrbPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.49	ColumnpvxERPSPortCrntPMNrrbPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.50	ColumnpvxERPSPortCrntPMNrrbPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.51	ColumnpvxERPSPortCrntPMSfPduTxValue	read-only	current	The Number of SF PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.52	ColumnpvxERPSPortCrntPMSfPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.53	ColumnpvxERPSPortCrntPMSfPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.54	ColumnpvxERPSPortCrntPMSfPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.55	ColumnpvxERPSPortCrntPMSfPduRxValue	read-only	current	The number of SF PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.56	ColumnpvxERPSPortCrntPMSfPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.57	ColumnpvxERPSPortCrntPMSfPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.58	ColumnpvxERPSPortCrntPMSfPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.59	ColumnpvxERPSPortCrntPMFsPduTxValue	read-only	current	The Number of FS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.60	ColumnpvxERPSPortCrntPMFsPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.61	ColumnpvxERPSPortCrntPMFsPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.62	ColumnpvxERPSPortCrntPMFsPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.63	ColumnpvxERPSPortCrntPMFsPduRxValue	read-only	current	The number of FS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.64	ColumnpvxERPSPortCrntPMFsPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.65	ColumnpvxERPSPortCrntPMFsPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.66	ColumnpvxERPSPortCrntPMFsPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.67	ColumnpvxERPSPortCrntPMMsPduTxValue	read-only	current	The Number of MS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.68	ColumnpvxERPSPortCrntPMMsPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.69	ColumnpvxERPSPortCrntPMMsPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.70	ColumnpvxERPSPortCrntPMMsPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.71	ColumnpvxERPSPortCrntPMMsPduRxValue	read-only	current	The number of MS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.72	ColumnpvxERPSPortCrntPMMsPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.73	ColumnpvxERPSPortCrntPMMsPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.74	ColumnpvxERPSPortCrntPMMsPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.75	ColumnpvxERPSPortCrntPMEventPduTxValue	read-only	current	The Number of Event PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.76	ColumnpvxERPSPortCrntPMEventPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.77	ColumnpvxERPSPortCrntPMEventPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.78	ColumnpvxERPSPortCrntPMEventPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.79	ColumnpvxERPSPortCrntPMEventPduRxValue	read-only	current	The number of Event PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.80	ColumnpvxERPSPortCrntPMEventPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.81	ColumnpvxERPSPortCrntPMEventPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.82	ColumnpvxERPSPortCrntPMEventPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.45.1.83	ColumnpvxERPSPortCrntPMVersionDiscardValue	read-only	current	The number of PDUs version discards on this port
1.3.6.1.4.1.18070.2.2.1.6.45.1.84	ColumnpvxERPSPortCrntPMVersionDiscardTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.85	ColumnpvxERPSPortCrntPMVersionDiscardValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.45.1.86	ColumnpvxERPSPortCrntPMVersionDiscardInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46	TablepvxERPSPortHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for PacketVX ERPS Port and ERPS Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.46.1	RowpvxERPSPortHistPMEntry	not-accessible	current	The row entry object of the PacketVX ERPS Port historical performance monitoring table. Each row of this table contains a full set of PM statistics and related…
1.3.6.1.4.1.18070.2.2.1.6.46.1.1	ColumnpvxERPSPortHistPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the ERPS Port is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.46.1.2	ColumnpvxERPSPortHistPMShelfIdx	not-accessible	current	The number of the shelf on which the ERPS Port targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.3	ColumnpvxERPSPortHistPMSlotIdx	not-accessible	current	The number of the slot within which the ERPS Port targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.4	ColumnpvxERPSPortHistPMTypeIdx	not-accessible	current	The type of PacketVX port on which the ERPS Port facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.46.1.5	ColumnpvxERPSPortHistPMPortIdx	not-accessible	current	The port number of the ERPS Port.
1.3.6.1.4.1.18070.2.2.1.6.46.1.6	ColumnpvxERPSPortHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.46.1.7	ColumnpvxERPSPortHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.46.1.8	ColumnpvxERPSPortHistPMPduTxValue	read-only	current	The Number of PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.9	ColumnpvxERPSPortHistPMPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.10	ColumnpvxERPSPortHistPMPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.11	ColumnpvxERPSPortHistPMPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.12	ColumnpvxERPSPortHistPMPduRxValue	read-only	current	The number of PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.13	ColumnpvxERPSPortHistPMPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.14	ColumnpvxERPSPortHistPMPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.15	ColumnpvxERPSPortHistPMPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.16	ColumnpvxERPSPortHistPMPduDiscardValue	read-only	current	The number of PDUs discarded on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.17	ColumnpvxERPSPortHistPMPduDiscardTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.18	ColumnpvxERPSPortHistPMPduDiscardValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.19	ColumnpvxERPSPortHistPMPduDiscardInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.20	ColumnpvxERPSPortHistPMBlockedValue	read-only	current	The number of times this port has transitioned to blocked state
1.3.6.1.4.1.18070.2.2.1.6.46.1.21	ColumnpvxERPSPortHistPMBlockedTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.22	ColumnpvxERPSPortHistPMBlockedValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.23	ColumnpvxERPSPortHistPMBlockedInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.24	ColumnpvxERPSPortHistPMUnblockedValue	read-only	current	The number of times this port has transitioned to unblocked state
1.3.6.1.4.1.18070.2.2.1.6.46.1.25	ColumnpvxERPSPortHistPMUnblockedTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.26	ColumnpvxERPSPortHistPMUnblockedValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.27	ColumnpvxERPSPortHistPMUnblockedInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.28	ColumnpvxERPSPortHistPMFailuresValue	read-only	current	The number of times this port has transitioned to failed state
1.3.6.1.4.1.18070.2.2.1.6.46.1.29	ColumnpvxERPSPortHistPMFailuresTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.30	ColumnpvxERPSPortHistPMFailuresValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.31	ColumnpvxERPSPortHistPMFailuresInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.32	ColumnpvxERPSPortHistPMRecoveriesValue	read-only	current	The number of times this port has recovered from failed state
1.3.6.1.4.1.18070.2.2.1.6.46.1.33	ColumnpvxERPSPortHistPMRecoveriesTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.34	ColumnpvxERPSPortHistPMRecoveriesValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.35	ColumnpvxERPSPortHistPMRecoveriesInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.36	ColumnpvxERPSPortHistPMNrPduTxValue	read-only	current	The Number of NR PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.37	ColumnpvxERPSPortHistPMNrPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.38	ColumnpvxERPSPortHistPMNrPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.39	ColumnpvxERPSPortHistPMNrPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.40	ColumnpvxERPSPortHistPMNrPduRxValue	read-only	current	The number of NR PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.41	ColumnpvxERPSPortHistPMNrPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.42	ColumnpvxERPSPortHistPMNrPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.43	ColumnpvxERPSPortHistPMNrPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.44	ColumnpvxERPSPortHistPMNrrbPduTxValue	read-only	current	The Number of NRRB PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.45	ColumnpvxERPSPortHistPMNrrbPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.46	ColumnpvxERPSPortHistPMNrrbPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.47	ColumnpvxERPSPortHistPMNrrbPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.48	ColumnpvxERPSPortHistPMNrrbPduRxValue	read-only	current	The number of NRRB PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.49	ColumnpvxERPSPortHistPMNrrbPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.50	ColumnpvxERPSPortHistPMNrrbPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.51	ColumnpvxERPSPortHistPMNrrbPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.52	ColumnpvxERPSPortHistPMSfPduTxValue	read-only	current	The Number of SF PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.53	ColumnpvxERPSPortHistPMSfPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.54	ColumnpvxERPSPortHistPMSfPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.55	ColumnpvxERPSPortHistPMSfPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.56	ColumnpvxERPSPortHistPMSfPduRxValue	read-only	current	The number of SF PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.57	ColumnpvxERPSPortHistPMSfPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.58	ColumnpvxERPSPortHistPMSfPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.59	ColumnpvxERPSPortHistPMSfPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.60	ColumnpvxERPSPortHistPMFsPduTxValue	read-only	current	The Number of FS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.61	ColumnpvxERPSPortHistPMFsPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.62	ColumnpvxERPSPortHistPMFsPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.63	ColumnpvxERPSPortHistPMFsPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.64	ColumnpvxERPSPortHistPMFsPduRxValue	read-only	current	The number of FS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.65	ColumnpvxERPSPortHistPMFsPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.66	ColumnpvxERPSPortHistPMFsPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.67	ColumnpvxERPSPortHistPMFsPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.68	ColumnpvxERPSPortHistPMMsPduTxValue	read-only	current	The Number of MS PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.69	ColumnpvxERPSPortHistPMMsPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.70	ColumnpvxERPSPortHistPMMsPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.71	ColumnpvxERPSPortHistPMMsPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.72	ColumnpvxERPSPortHistPMMsPduRxValue	read-only	current	The number of MS PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.73	ColumnpvxERPSPortHistPMMsPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.74	ColumnpvxERPSPortHistPMMsPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.75	ColumnpvxERPSPortHistPMMsPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.76	ColumnpvxERPSPortHistPMEventPduTxValue	read-only	current	The Number of Event PDUs transmitted on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.77	ColumnpvxERPSPortHistPMEventPduTxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.78	ColumnpvxERPSPortHistPMEventPduTxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.79	ColumnpvxERPSPortHistPMEventPduTxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.80	ColumnpvxERPSPortHistPMEventPduRxValue	read-only	current	The number of Event PDUs received on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.81	ColumnpvxERPSPortHistPMEventPduRxTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.82	ColumnpvxERPSPortHistPMEventPduRxValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.83	ColumnpvxERPSPortHistPMEventPduRxInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.46.1.84	ColumnpvxERPSPortHistPMVersionDiscardValue	read-only	current	The number of PDUs version discards on this port
1.3.6.1.4.1.18070.2.2.1.6.46.1.85	ColumnpvxERPSPortHistPMVersionDiscardTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.86	ColumnpvxERPSPortHistPMVersionDiscardValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.46.1.87	ColumnpvxERPSPortHistPMVersionDiscardInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47	TablepvxEServiceSlaCrntPMTable	not-accessible	current	A table of performance monitoring statistics collected for PacketVX Ethernet Service SLA objects.
1.3.6.1.4.1.18070.2.2.1.6.47.1	RowpvxEServiceSlaCrntPMEntry	not-accessible	current	The row entry object of the PacketVX Ethernet Service SLA historical performance monitoring table. Each row of this table contains a full set of PM statistics …
1.3.6.1.4.1.18070.2.2.1.6.47.1.1	ColumnpvxEServiceSlaCrntPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.47.1.2	ColumnpvxEServiceSlaCrntPMShelfIdx	not-accessible	current	The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.3	ColumnpvxEServiceSlaCrntPMSlotIdx	not-accessible	current	The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.4	ColumnpvxEServiceSlaCrntPMPortTypeIdx	not-accessible	current	The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.47.1.5	ColumnpvxEServiceSlaCrntPMPortIdx	not-accessible	current	The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.6.47.1.6	ColumnpvxEServiceSlaCrntPMESName	not-accessible	current	The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.6.47.1.7	ColumnpvxEServiceSlaCrntPMRMepId	not-accessible	current	Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.6.47.1.8	ColumnpvxEServiceSlaCrntPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.47.1.9	ColumnpvxEServiceSlaCrntPMNearEndFrameLoss	read-only	current	Indicates near end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.10	ColumnpvxEServiceSlaCrntPMNearEndFrameLossTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.11	ColumnpvxEServiceSlaCrntPMNearEndFrameLossValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.12	ColumnpvxEServiceSlaCrntPMNearEndFrameLossInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.13	ColumnpvxEServiceSlaCrntPMFarEndFrameLoss	read-only	current	Indicates far end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.14	ColumnpvxEServiceSlaCrntPMFarEndFrameLossTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.15	ColumnpvxEServiceSlaCrntPMFarEndFrameLossValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.16	ColumnpvxEServiceSlaCrntPMFarEndFrameLossInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.17	ColumnpvxEServiceSlaCrntPM2WayDelayMinimum	read-only	current	Indicates two way delay minimum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.18	ColumnpvxEServiceSlaCrntPM2WayDelayMinimumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.19	ColumnpvxEServiceSlaCrntPM2WayDelayMinimumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.21	ColumnpvxEServiceSlaCrntPM2WayDelayMinimumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.22	ColumnpvxEServiceSlaCrntPM2WayDelayMaximum	read-only	current	Indicates two way delay maximum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.23	ColumnpvxEServiceSlaCrntPM2WayDelayMaximumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.24	ColumnpvxEServiceSlaCrntPM2WayDelayMaximumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.25	ColumnpvxEServiceSlaCrntPM2WayDelayMaximumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.26	ColumnpvxEServiceSlaCrntPM2WayDelayAverage	read-only	current	Indicates two way delay average value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.27	ColumnpvxEServiceSlaCrntPM2WayDelayAverageTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.28	ColumnpvxEServiceSlaCrntPM2WayDelayAverageValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.29	ColumnpvxEServiceSlaCrntPM2WayDelayAverageInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.30	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMinimum	read-only	current	Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.31	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMinimumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.32	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMinimumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.33	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMinimumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.34	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMaximum	read-only	current	Indicates two way delay Variation Maximum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.35	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMaximumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.36	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMaximumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.37	ColumnpvxEServiceSlaCrntPM2WayDelayVariationMaximumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.47.1.38	ColumnpvxEServiceSlaCrntPM2WayDelayVariationAverage	read-only	current	Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.39	ColumnpvxEServiceSlaCrntPM2WayDelayVariationAverageTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.40	ColumnpvxEServiceSlaCrntPM2WayDelayVariationAverageValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.47.1.41	ColumnpvxEServiceSlaCrntPM2WayDelayVariationAverageInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48	TablepvxEServiceSlaHistPMTable	not-accessible	current	A table of historical performance monitoring statistics collected for PacketVX ERPS Port and ERPS Instance Port objects.
1.3.6.1.4.1.18070.2.2.1.6.48.1	RowpvxEServiceSlaHistPMEntry	not-accessible	current	The row entry object of the PacketVX Ethernet Service SLA historical performance monitoring table. Each row of this table contains a full set of PM statistics …
1.3.6.1.4.1.18070.2.2.1.6.48.1.1	ColumnpvxEServiceSlaHistPMSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.48.1.2	ColumnpvxEServiceSlaHistPMShelfIdx	not-accessible	current	The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.3	ColumnpvxEServiceSlaHistPMSlotIdx	not-accessible	current	The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.4	ColumnpvxEServiceSlaHistPMPortTypeIdx	not-accessible	current	The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.6.48.1.5	ColumnpvxEServiceSlaHistPMPortIdx	not-accessible	current	The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.6.48.1.6	ColumnpvxEServiceSlaHistPMESName	not-accessible	current	The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.6.48.1.7	ColumnpvxEServiceSlaHistPMRMepId	not-accessible	current	Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.6.48.1.8	ColumnpvxEServiceSlaHistPMIntervalTypeIdx	not-accessible	current	The type of PM bin according to interval length.
1.3.6.1.4.1.18070.2.2.1.6.48.1.9	ColumnpvxEServiceSlaHistPMIntervalIdx	not-accessible	current	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
1.3.6.1.4.1.18070.2.2.1.6.48.1.10	ColumnpvxEServiceSlaHistPMNearEndFrameLoss	read-only	current	Indicates near end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.11	ColumnpvxEServiceSlaHistPMNearEndFrameLossTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.12	ColumnpvxEServiceSlaHistPMNearEndFrameLossValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.13	ColumnpvxEServiceSlaHistPMNearEndFrameLossInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.14	ColumnpvxEServiceSlaHistPMFarEndFrameLoss	read-only	current	Indicates far end frame loss ratio value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.15	ColumnpvxEServiceSlaHistPMFarEndFrameLossTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.16	ColumnpvxEServiceSlaHistPMFarEndFrameLossValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.17	ColumnpvxEServiceSlaHistPMFarEndFrameLossInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.18	ColumnpvxEServiceSlaHistPM2WayDelayMinimum	read-only	current	Indicates two way delay minimum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.19	ColumnpvxEServiceSlaHistPM2WayDelayMinimumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.20	ColumnpvxEServiceSlaHistPM2WayDelayMinimumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.21	ColumnpvxEServiceSlaHistPM2WayDelayMinimumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.22	ColumnpvxEServiceSlaHistPM2WayDelayMaximum	read-only	current	Indicates two way delay maximum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.23	ColumnpvxEServiceSlaHistPM2WayDelayMaximumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.24	ColumnpvxEServiceSlaHistPM2WayDelayMaximumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.25	ColumnpvxEServiceSlaHistPM2WayDelayMaximumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.26	ColumnpvxEServiceSlaHistPM2WayDelayAverage	read-only	current	Indicates two way delay average value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.27	ColumnpvxEServiceSlaHistPM2WayDelayAverageTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.28	ColumnpvxEServiceSlaHistPM2WayDelayAverageValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.29	ColumnpvxEServiceSlaHistPM2WayDelayAverageInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.30	ColumnpvxEServiceSlaHistPM2WayDelayVariationMinimum	read-only	current	Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.31	ColumnpvxEServiceSlaHistPM2WayDelayVariationMinimumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.32	ColumnpvxEServiceSlaHistPM2WayDelayVariationMinimumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.33	ColumnpvxEServiceSlaHistPM2WayDelayVariationMinimumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.34	ColumnpvxEServiceSlaHistPM2WayDelayVariationMaximum	read-only	current	Indicates two way delay Variation Maximum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.35	ColumnpvxEServiceSlaHistPM2WayDelayVariationMaximumTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.36	ColumnpvxEServiceSlaHistPM2WayDelayVariationMaximumValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.37	ColumnpvxEServiceSlaHistPM2WayDelayVariationMaximumInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.6.48.1.38	ColumnpvxEServiceSlaHistPM2WayDelayVariationAverage	read-only	current	Indicates two way delay Variation Minimum value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.39	ColumnpvxEServiceSlaHistPM2WayDelayVariationAverageTimeStamp	read-only	current	The date and time stamp of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.40	ColumnpvxEServiceSlaHistPM2WayDelayVariationAverageValidity	read-only	current	Indicates the validity of the value.
1.3.6.1.4.1.18070.2.2.1.6.48.1.41	ColumnpvxEServiceSlaHistPM2WayDelayVariationAverageInitialize	read-write	current	Used to initialize the value to 0.
1.3.6.1.4.1.18070.2.2.1.14.1.1	TablepvxSwitchTable	not-accessible	current	This table is used to configure the switching related properties of a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1	RowpvxSwitchEntry	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.1	ColumnpvxSwitchIdx	accessible-for-notify	current	An index represents the switch ID. It can be from 1 to 11.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.2	ColumnpvxSwitchMode	read-create	current	Sets the top-level operational mode for the packetVX Switch, which is based on the VLAN tagging scheme (802.1Q or 802.1ad) employed by the customer.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.3	ColumnpvxSwitchInnerEthType	read-only	current	The inner ethertype (802.1Q) is configurable (switch-level only); enhancement for customers who want/need to support a C-Tag ethertype other than the standard …
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.4	ColumnpvxSwitchLearning	read-create	current	This attribute used to enable/disable the MAC learning of the bridge. MAC Learning can be enabled to populate the Forwarding Database (FDB) and achieve unicast…
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.5	ColumnpvxSwitchAgingTimer	read-create	current	When learning and aging are enabled, FDB entries will age out according to the timer value. The aging timer for a particular FDB entry (source MAC address) is …
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.6	ColumnpvxSwitchTimeToAge	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.7	ColumnpvxSwitchMasterNode	read-only	deprecated	This is a read-only attribute used to inform the user as to the amount of time remaining before the next aging cycle - the time at which FDB entries may be del…
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.8	ColumnpvxSwitchForceSwitch	read-create	deprecated
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.10	ColumnpvxSwitchClearDynamicFDBEntries	read-create	current	An action trigger object. Setting the value of this object to 'true' will cause the switch to clear out all of the dynamic MAC address table entries in its for…
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.11	ColumnpvxSwitchProtocolAdminState	read-create	current	Bit map indicating protocols enabled on the switch. A value of one in the bit map means the corresponding protocol is enabled. Zero means the protocol is disab…
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.12	ColumnpvxSwitchTunnMacAddrProfile	read-create	current	The name of the Tunnel MAC Address profile used by the switch.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.13	ColumnpvxSwitchEvcMEGName	read-create	current	Name of the EVC Maintanence Entity Group. Maximum length is 6 characters. Default value is set to BTI by the system.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.14	ColumnpvxSwitchEvcMEGLevel	read-create	current	The EVC Maintanence Entity Group Level.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.15	ColumnpvxSwitchName	read-create	current	The switch name string.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.16	ColumnpvxSwitchMIPAutoCreate	read-create	current	This field controls MIP auto-creation funcion. When set true, MIPs are created automatically.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.17	ColumnpvxSwitchMIPAutoCreateMEL	read-create	current	The maintanence entity Level at which MIPs are auto created.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.18	ColumnpvxSwitchStackingPrimary	read-only	current	The instance number of the primary PacketVX.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.19	ColumnpvxSwitchStackingTimeAsPrimary	read-only	current	The number of seconds that the stacking primary has remained as primary.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.20	ColumnpvxSwitchErpsVlanPropagate	read-create	current	This provides option the user to control how the user traffic needs to be converged in case of ERPS ring failures. With fast option, user traffic converges in …
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.21	ColumnpvxSwitchCfmDestinationAddress	read-create	current	This provides an option to the user to control CCM message destination address which will scale down time necessary to process CCM messages.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.22	ColumnpvxSwitchIntfBouncingTimerPeriod	read-create	current	A timer interval in seconds used to detect port bouncing state.
1.3.6.1.4.1.18070.2.2.1.14.1.1.1.100	ColumnpvxSwitchRowStatus	read-create	current	Used to control the addition and deletion of entries in the switch table, which in turn controls provisioning and deprovisioning of the switches.
1.3.6.1.4.1.18070.2.2.1.14.1.2	TablepvxSwitchMemberTable	not-accessible	current	This table is used to configure the members of a virtual switch. Each member corresponds to the physical pack in the system.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1	RowpvxSwitchMemberEntry	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.1	ColumnpvxSwitchMemberIdx	accessible-for-notify	current	An index represents the switch ID. It can be from 1 to 11.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.2	ColumnpvxSwitchMemberInstIdx	accessible-for-notify	current	An index represents the member ID. It can be from 1 to 2.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.3	ColumnpvxSwitchMemberShelfId	read-create	current	The number of the shelf on which the member is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.4	ColumnpvxSwitchMemberSlotId	read-create	current	The number of the slot on which the member is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.8	ColumnpvxSwitchMemberStackingState	read-only	current	If the AdminState is disabled, the stacking state will be disabled. If there is only one PacketVX enabled in the switch, the value of this variable will be uns…
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.9	ColumnpvxSwitchMemberStackingPortCommState	read-only	current	If the redundancy manager believes it can communicate with its peer across the stacking port, the value of this variable will be connectionOk. Otherwise, it wi…
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.10	ColumnpvxSwitchMemberBackplaneCommState	read-only	current	If the redundancy manager believes it can communicate with its peer across the backplane, the value of this variable will be connectionOk. Otherwise, it will b…
1.3.6.1.4.1.18070.2.2.1.14.1.2.1.100	ColumnpvxSwitchMemberRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.1.4	TablepvxVLANTable	not-accessible	current	This table is used to configure the Vlan related entries on a particular port of a virtual switch member.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1	RowpvxVLANEntry	not-accessible	current	The conceptual row object of the Vlan Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.1	ColumnpvxVLANSwitchIdx	not-accessible	current	This object represents the particular switch id on which Vlan is configured.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.2	ColumnpvxVLANIdx	not-accessible	current	This object is the index of the Vlan id of the CP.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.4	ColumnpvxVLANMemberPortList	read-create	current	This object represents a single ingress port or set of ports which can be configured for a particular vlan. The format of the set request for this object will …
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.5	ColumnpvxVLANUnTaggedPortList	read-create	current	The set of ports which are transmitting traffic for this VLAN as untagged frames. Note: The set request will fail if the syntax of the value is not exactly the…
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.6	ColumnpvxVLANMacLearning	read-create	current	This object is used to configure the Vlan Mac learnining
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.7	ColumnpvxVLANAdminState	read-create	current	The administrative status of the Vlan.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.8	ColumnpvxVLANMSTPId	read-create	current	An alpha-numeric book keeping attribute for the VLAN.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.9	ColumnpvxVLANService	read-only	current	Name of the service associated with this VLAN. If no service is associated with the value is a zero length string.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.10	ColumnpvxVLANForbiddenPortList	read-create	current	The set of ports which GVRP is forbidden to learn.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.11	ColumnpvxVLANOperStatus	read-only	current	The current operational state of the VLAN.
1.3.6.1.4.1.18070.2.2.1.14.1.4.1.100	ColumnpvxVLANRowStatus	read-create	current	This object is used to create a new row in the vlan table.
1.3.6.1.4.1.18070.2.2.1.14.1.5	TablepvxFDBTable	not-accessible	current	This table is used to configure the MAC (FDB) related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1	RowpvxFDBEntry	not-accessible	current	The conceptual row object of the forwardinngDB table.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.1	ColumnpvxFDBSwitchIdx	not-accessible	current	This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.2	ColumnpvxFDBVlanIdx	not-accessible	current	This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.3	ColumnpvxFDBMACAddrIdx	not-accessible	current	This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.4	ColumnpvxFDBPort	read-only	current	This object represents the port of the forwarding Database.
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.5	ColumnpvxFDBAddressType	read-only	current	The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corr…
1.3.6.1.4.1.18070.2.2.1.14.1.5.1.6	ColumnpvxFDBRowStatus	read-create	current	This object is used to create a new row in the FDB table.
1.3.6.1.4.1.18070.2.2.1.14.1.6	TablepvxStaticUnicastTable	not-accessible	current	A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management spe…
1.3.6.1.4.1.18070.2.2.1.14.1.6.1	RowpvxStaticUnicastEntry	not-accessible	current	Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and…
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.1	ColumnpvxStaticUnicastSwitchIdx	not-accessible	current	This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.2	ColumnpvxStaticUnicastVlanIdx	not-accessible	current	This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.3	ColumnpvxStaticUnicastMACAddrIdx	not-accessible	current	This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.4	ColumnpvxStaticUnicastReceivePort	not-accessible	current	Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z…
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.5	ColumnpvxStaticUnicastIntfIdList	read-create	current	The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned.
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.6	ColumnpvxStaticUnicastAddressType	read-create	current	This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll…
1.3.6.1.4.1.18070.2.2.1.14.1.6.1.100	ColumnpvxStaticUnicastRowStatus	read-create	current	This object is used to create a new row in the static unicast table.
1.3.6.1.4.1.18070.2.2.1.14.1.7	TablepvxMultiCastGroupTable	not-accessible	current	This table is used to configure the multicast table related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1	RowpvxMultiCastEntry	not-accessible	current	The conceptual row object of the forwardinngDB table.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.1	ColumnpvxMCSwitchIdx	not-accessible	current	This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.2	ColumnpvxMCVlanIdx	not-accessible	current	This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.3	ColumnpvxMCMACAddrIdx	not-accessible	current	This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.4	ColumnpvxMCIntfIdList	read-only	current	The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of …
1.3.6.1.4.1.18070.2.2.1.14.1.7.1.6	ColumnpvxMCRowStatus	read-create	current	This object is used to create a new row in the MCG table.
1.3.6.1.4.1.18070.2.2.1.14.1.8	TablepvxStaticMulticastTable	not-accessible	current	A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management spe…
1.3.6.1.4.1.18070.2.2.1.14.1.8.1	RowpvxStaticMulticastEntry	not-accessible	current	Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and…
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.1	ColumnpvxStaticMCSwitchIdx	not-accessible	current	This object represents the particular switch ID.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.2	ColumnpvxStaticMCVlanIdx	not-accessible	current	This object is the fdb vlan id.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.3	ColumnpvxStaticMCMACAddrIdx	not-accessible	current	This object represents the particular MAC address.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.4	ColumnpvxStaticMCReceivePort	not-accessible	current	Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z…
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.5	ColumnpvxStaticMCStaticIntfIdList	read-create	current	The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.6	ColumnpvxStaticMCForbiddenIntfIdList	read-create	current	The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded.
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.7	ColumnpvxStaticMCAddressType	read-create	current	This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll…
1.3.6.1.4.1.18070.2.2.1.14.1.8.1.100	ColumnpvxStaticMCRowStatus	read-create	current	This object is used to create a new row in the static multicast table.
1.3.6.1.4.1.18070.2.2.1.14.1.9	TablepvxLagTable	not-accessible	current	This table is used to configure the link aggregation at system level.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1	RowpvxLagEntry	not-accessible	current	The conceptual row object of the lag Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.1	ColumnpvxLagSwitchIdx	not-accessible	current	This object represents the particular switch id .
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.2	ColumnpvxLagState	read-create	current	The administrative status.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.3	ColumnpvxLagSystemPriority	read-create	current	This object represents the lag system priority.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.4	ColumnpvxLagSystemIdentifier	read-only	current	This object is used to identify the particular lag ID.
1.3.6.1.4.1.18070.2.2.1.14.1.9.1.100	ColumnpvxLagRowStatus	read-create	current	This object is used to create a new row in the lag table.
1.3.6.1.4.1.18070.2.2.1.14.1.10	TablepvxLagGroupTable	not-accessible	current	This table is used to configure the link aggregation protocol related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1	RowpvxLagGroupEntry	not-accessible	current	The conceptual row object of the lag Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.1	ColumnpvxLGSwitchIdx	not-accessible	current	This object represents the particular switch id of lag group.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.2	ColumnpvxLGIdx	not-accessible	current	This is the id index of the lagGroup.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.3	ColumnpvxLGPortList	read-only	current	Each entry in this list is for each physical port that participates in Link Aggregation which can be either aggregatable or individual.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.4	ColumnpvxLGDistribution	read-create	current	This object represents the distribution method for LAG traffic.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.6	ColumnpvxLGMacAddress	read-only	current	This object represents the MAC address of the LAG group
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.7	ColumnpvxLGPortCount	read-only	current	The number of ports actually configured to the LAG group
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.8	ColumnpvxLGActivePortCount	read-only	current	This object will give the number of ports that are attached to the LAG group and actively carrying data traffic on the link.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.9	ColumnpvxLGMtuSize	read-create	current	This object will give the MTU size of the LAG group
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.10	ColumnpvxLGAdminStatus	read-create	current	Sets the Link Aggregation Module administrative status as enabled or disabled.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.11	ColumnpvxLGOperStatus	read-only	current	This read only objects gives actual status of the Link Aggregation Module (Operational status of module). When Module is enabled Link Aggregation protocol star…
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.12	ColumnpvxLGDataRate	read-only	current	The current data rate, in megabits per second, of the aggregate link. The value is calculated as N times the data rate of a single link in the aggregation, whe…
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.13	ColumnpvxLGMaxLinks	read-create	current	Sets the number of maximum links in the Link Aggregation Group. If the number of links in an aggregation exceeds the maximum value set, then the links with the…
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.14	ColumnpvxLGMinLinks	read-create	current	Sets the minimum number of links in the Link Aggregation Group to be active to advertise upper layers that the aggregate link operationally up.
1.3.6.1.4.1.18070.2.2.1.14.1.10.1.100	ColumnpvxLGRowStatus	read-create	current	This object is used to create a new row in the lagConfig table.
1.3.6.1.4.1.18070.2.2.1.14.1.11	TablepvxLagPortTable	not-accessible	current	This table is used to configure the link aggregation protocol related entries. TODO: Need to re-check the index here, and what is pvxLagPortId
1.3.6.1.4.1.18070.2.2.1.14.1.11.1	RowpvxLagPortEntry	not-accessible	current	The conceptual row object of the lag Config table.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.1	ColumnpvxLagPortSwitchIdx	not-accessible	current	This object represents the particular switch id of lag group.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.2	ColumnpvxLagPortShelfIdx	not-accessible	current	This is the id index of the lagGroup.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.3	ColumnpvxLagPortSlotIdx	not-accessible	current	The is the slot number for the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.4	ColumnpvxLagPortTypeIdx	not-accessible	current	This object is port type of the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.5	ColumnpvxLagPortIdx	not-accessible	current	This object is the port number of the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.6	ColumnpvxLagPortPriority	read-create	current	This object represents the lag port priority
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.7	ColumnpvxLagPortMode	read-create	current	This object is used to enable LACP , disable LACP or manually aggregate a port
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.8	ColumnpvxLagPortAggState	read-only	current	This read-only object is used to display the port state in aggregation inBndl(1) - The port is operationally up and actively takes part in aggregation. standby…
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.9	ColumnpvxLagPortLcapId	read-create	current	This object sets the global LCAP System ID.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.10	ColumnpvxLagPortTimeout	read-create	current	This object sets the LACP timeout period. long(1) - LACP PDU will be sent every 30 seconds and LACP timeout value (no packet is received from peer) is 90 secon…
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.11	ColumnpvxLagPortWaitTime	read-create	current	Duration of time for the port to attach to the LAG group.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.12	ColumnpvxLagPortActAdminState	read-only	current	This object is the actors administrative state.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.13	ColumnpvxLagPortPrtnrAdminState	read-only	current	This object is the partners administrative state.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.14	ColumnpvxLagPortGroupId	read-create	current	This object is the LAG group id associated with the lag port.
1.3.6.1.4.1.18070.2.2.1.14.1.11.1.100	ColumnpvxLagPortRowStatus	read-create	current	This object is used to create a new row in the lagConfig table.
1.3.6.1.4.1.18070.2.2.1.14.1.12	TablepvxMSTPGenTable	not-accessible	current	This table is used to configure the Spanning Tree protocol on a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1	RowpvxMSTPGenEntry	not-accessible	current	The conceptual row object of the packet Spanning Tree protocol config table.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.1	ColumnpvxMSTPGenSwitchIdx	not-accessible	current	This object represents the switch id of the MSTP Gen.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.2	ColumnpvxMSTPGenMaxHops	read-create	current	This object represents the maximum hops that can be configured.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.3	ColumnpvxMSTPGenVersionSupported	read-only	current	This object is used to read the supported version
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.4	ColumnpvxMSTPGenIdFmtSel	read-only	current	This object is used to configure the Frame Selection on particular virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.5	ColumnpvxMSTPGenIdName	read-create	current	This object is used to configure MSTP ID name on a particular virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.6	ColumnpvxMSTPGenIdRevisionLevel	read-create	current	This object represents MSTP Revision Level in seconds.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.7	ColumnpvxMSTPGenIdDigest	read-only	current	This object represents MSTP ID digest value.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.8	ColumnpvxMSTPGenRegionalRoot	read-only	current	This object represents the mstp Regional Root .
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.9	ColumnpvxMSTPGenExternalRootCost	read-only	current	This represents the mstp External Root Cost .
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.10	ColumnpvxMSTPGenCistPriority	read-create	current	This CIST priority of this bridge.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.11	ColumnpvxMSTPGenBrdgId	read-only	current	The bridge ID.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.12	ColumnpvxMSTPGenCistRoot	read-only	current	The root of the CIST.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.13	ColumnpvxMSTPGenCistRootPriority	read-only	current	The priority of the CIST root.
1.3.6.1.4.1.18070.2.2.1.14.1.12.1.14	ColumnpvxMSTPGenCistRootCost	read-only	current	The cost of the CIST root bridge.
1.3.6.1.4.1.18070.2.2.1.14.1.13	TablepvxMSTPMapTable	not-accessible	current	This table is used to configure the Spanning Tree Map on a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1	RowpvxMSTPMapEntry	not-accessible	current	The conceptual row object of the MSTP Map table.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.1	ColumnpvxMSTPMapSwitchIdx	not-accessible	current	This object represents the switch id of the mstp map.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.2	ColumnpvxMSTPMapIdx	not-accessible	current	This object represents the mstp map index.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.3	ColumnpvxMSTPMapVlanS1k	read-create	current	This object is used to configure 1k Vlans
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.4	ColumnpvxMSTPMapVlanS2k	read-create	current	This object is used to configure 2k Vlans.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.5	ColumnpvxMSTPMapVlanS3k	read-create	current	This object is used to configure configure 3k Vlans.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.6	ColumnpvxMSTPMapVlanS4k	read-create	current	This object is used to configure configure 4k Vlans.
1.3.6.1.4.1.18070.2.2.1.14.1.13.1.100	ColumnpvxMSTPMapRowStatus	read-create	current	Used to control the addition and deletion of entries in the mstp table.
1.3.6.1.4.1.18070.2.2.1.14.1.14	TablepvxMSTPPortTable	not-accessible	current	This table is used to configure the Spanning tree port related entries. TODO: This table needs to change to be able to deal with indexing based on shelf and sl…
1.3.6.1.4.1.18070.2.2.1.14.1.14.1	RowpvxMSTPPortEntry	not-accessible	current	The conceptual row object of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.1	ColumnpvxMSTPPortSwitchIdx	not-accessible	current	This object represents the particular switch id .
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.2	ColumnpvxMSTPPortShelfIdx	not-accessible	current	The instace Id of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.3	ColumnpvxMSTPPortSlotIdx	not-accessible	current	This is the port index of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.4	ColumnpvxMSTPPortTypeIdx	not-accessible	current	This is the port index of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.5	ColumnpvxMSTPPortIdx	not-accessible	current	This is the port index of the mstp port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.6	ColumnpvxMSTPPortDesignatedRoot	read-only	current	This is the designated root.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.7	ColumnpvxMSTPPortDesignatedBridge	read-only	current	This is the designated bridge ID.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.8	ColumnpvxMSTPPortDesignatedPort	read-only	current	This is the designated port.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.9	ColumnpvxMSTPPortPathCost	read-create	current	This is the path cost.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.10	ColumnpvxMSTPPortPriority	read-create	current	This is the port priority.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.11	ColumnpvxMSTPPortState	read-only	current	This is the port state.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.12	ColumnpvxMSTPPortRole	read-only	current	This is the port role.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.13	ColumnpvxMSTPPortRegRoot	read-only	current	This is the port's reg root.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.14	ColumnpvxMSTPPortRegRootCost	read-only	current	This is the port's reg root cost.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.15	ColumnpvxMSTPPortRestrictedRole	read-create	current	This is the port's restricted role.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.16	ColumnpvxMSTPPortRestrictedTCN	read-create	current	This is the port's restricted TCN.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.17	ColumnpvxMSTPPortForcedPortState	read-create	current	This is the port's forced port state.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.18	ColumnpvxMSTPPortLoopGuardState	read-create	current	This is the port's Loop Guard state.
1.3.6.1.4.1.18070.2.2.1.14.1.14.1.19	ColumnpvxMSTPPortLinkType	read-create	current	The link type of this port.
1.3.6.1.4.1.18070.2.2.1.14.1.15	TablepvxMSTPXstTable	not-accessible	current	This table is used to configure the Mstp Xst related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1	RowpvxMSTPXstEntry	not-accessible	current	The conceptual row object of the mstpXst table.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.1	ColumnpvxMSTPXstSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.2	ColumnpvxMSTPXstIdx	not-accessible	current	The instance of the mstpXst Id.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.3	ColumnpvxMSTPXstBrdgPriority	read-create	current	This Bridge priority.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.4	ColumnpvxMSTPXstBrdgId	read-only	current	The bridge ID.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.5	ColumnpvxMSTPXstBrdgRegRoot	read-only	current	The bridge Reg Root.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.6	ColumnpvxMSTPXstBrdgRegRootCost	read-only	current	The root cost of destination bridge.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.7	ColumnpvxMSTPXstRootPort	read-only	deprecated	The root port number.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.8	ColumnpvxMSTPXstRootPortSwitch	read-only	current	The Switch ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.9	ColumnpvxMSTPXstRootPortShelf	read-only	current	The shelf ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.10	ColumnpvxMSTPXstRootPortSlot	read-only	current	The slot ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.11	ColumnpvxMSTPXstRootPortType	read-only	current	The port type of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.15.1.12	ColumnpvxMSTPXstRootPortNum	read-only	current	The port ID of the port on this bridge through which the spanning tree root node is reached.
1.3.6.1.4.1.18070.2.2.1.14.1.16	TablepvxMSTPXstPortTable	not-accessible	current	This table is used to configure the mstp Xst Port related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1	RowpvxMSTPXstPortEntry	not-accessible	current	The conceptual row object of the mstp Xst Port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.1	ColumnpvxMSTPXstPortSwitchIdx	not-accessible	current	This object represents the particular switch id of mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.2	ColumnpvxMSTPXstPortShelfIdx	not-accessible	current	The instace index of the mstp Xst Port table .
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.3	ColumnpvxMSTPXstPortSlotIdx	not-accessible	current	The instace index of the mstp Xst Port table .
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.4	ColumnpvxMSTPXstPortTypeIdx	not-accessible	current	The instace index of the mstp Xst Port table .
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.5	ColumnpvxMSTPXstPortInstIdx	not-accessible	current	This Xst instance index of the mstpXstPort table.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.6	ColumnpvxMSTPXstPortIdx	not-accessible	current	This port instance of the mstpXstPort table.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.7	ColumnpvxMSTPXstPortState	read-only	current	The port state of the mstp Xst.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.8	ColumnpvxMSTPXstPortRole	read-only	current	The role of the participating port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.9	ColumnpvxMSTPXstPortDesigRoot	read-only	current	The designated root attribute of the mstp Xst Port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.10	ColumnpvxMSTPXstPortDesigCost	read-only	current	The root cost of the mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.11	ColumnpvxMSTPXstPortDesigBridge	read-only	current	The designated bridge ID of the mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.12	ColumnpvxMSTPXstPortDesigPortId	read-only	current	The designated port id of the mstpXstPort.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.13	ColumnpvxMSTPXstPortPriority	read-create	current	The port priority of the mstp Xst Port
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.14	ColumnpvxMSTPXstPortPathCost	read-create	current	This path cost of the mstpXst port.
1.3.6.1.4.1.18070.2.2.1.14.1.16.1.15	ColumnpvxMSTPXstPortForcedPortState	read-create	current	This is the port's forced port state.
1.3.6.1.4.1.18070.2.2.1.14.1.17	TablepvxNextFreeIndexTable	not-accessible	current	This table is used to find the next free index in some tables that use integer indices.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1	RowpvxNextFreeIndexEntry	not-accessible	current	The conceptual row object of the Next Free Index Table.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1.1	ColumnpvxNextFreeIndexTableIndex	not-accessible	current	This object indicates from which table to fetch the next free index.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1.2	ColumnpvxNextFreeIndexSwitchIdx	not-accessible	current	This object represents the particular switch id to fetch.
1.3.6.1.4.1.18070.2.2.1.14.1.17.1.3	ColumnpvxNextFreeIndexValue	read-only	current	The value of the next free index in the specified table on the specified switch.
1.3.6.1.4.1.18070.2.2.1.14.1.18	TablepvxUNITable	not-accessible	current	This table defines all User Network Interfaces on all swotches.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1	RowpvxUNIEntry	not-accessible	current	The conceptual row object of the UNI Table
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.1	ColumnpvxUNISwitchId	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.2	ColumnpvxUNIShelfId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.3	ColumnpvxUNISlotId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.4	ColumnpvxUNIPortTypeId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.5	ColumnpvxUNIPortId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.6	ColumnpvxUNISpeed	read-only	current	Speed of the UNI in mb/sec
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.7	ColumnpvxUNIMode	read-only	current	Full/half duplex mode of the UNI
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.8	ColumnpvxUNIMaxFrameSize	read-create	current	Maximum Frame size for the UNI
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.9	ColumnpvxUNICurrentFrameSize	read-only	current	The maximum of the Max Frame Size of all the services associated with the UNI.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.10	ColumnpvxUNIServiceType	read-create	current	A combination of the MEF variables for multiplexing, bundling and all-in-bundling.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.11	ColumnpvxUNINumServices	read-only	current	The number of services that attach to this UNI.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.12	ColumnpvxUNICPVid	read-create	current	The Port VLAN Id at the customer level for this UNI. This field is valid only if UNIServiceType is virtualSingle, virtualMultiple, or virtualUntagged.
1.3.6.1.4.1.18070.2.2.1.14.1.18.1.100	ColumnpvxUNIRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.1.19	TablepvxNNITable	not-accessible	current	This table defines all User Network Interfaces on all swotches.
1.3.6.1.4.1.18070.2.2.1.14.1.19.1	RowpvxNNIEntry	not-accessible	current	The conceptual row object of the NNI Table
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.1	ColumnpvxNNISwitchId	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.2	ColumnpvxNNIShelfId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.3	ColumnpvxNNISlotId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.4	ColumnpvxNNIPortTypeId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.5	ColumnpvxNNIPortId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.6	ColumnpvxNNISpeed	read-only	current	Speed of the NNI in mb/sec
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.7	ColumnpvxNNIMode	read-only	current	Full/half duplex mode of the NNI
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.8	ColumnpvxNNIMaxFrameSize	read-create	current	Maximum Frame size for the NNI
1.3.6.1.4.1.18070.2.2.1.14.1.19.1.100	ColumnpvxNNIRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.1.20	TablepvxVlanPortTable	not-accessible	current	This table is used to configure Vlan port related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1	RowpvxVlanPortEntry	not-accessible	current	The conceptual row object of the vlan port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.1	ColumnpvxVlanPortSwitchIdx	not-accessible	current	This object represents the particular switch id .
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.2	ColumnpvxVlanPortShelfIdx	not-accessible	current	This represents the shelf this port belongs to.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.3	ColumnpvxVlanPortSlotIdx	not-accessible	current	This represents the slot this port belogs to.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.4	ColumnpvxVlanPortTypeIdx	not-accessible	current	This represents the port type.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.5	ColumnpvxVlanPortIdx	not-accessible	current	This is the port index of the vlan port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.6	ColumnpvxVlanPortGvrpAdminState	read-create	current	The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as the global GVRP status is enabled on the…
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.7	ColumnpvxVlanPortRestrictedVlanState	read-create	current	The state of Restricted VLAN Registration on this port. If the value of this control is enabled(1), then creation of a new dynamic VLAN entry is permitted only…
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.8	ColumnpvxVlanPortEthPortAllowedFrametType	read-only	current	When the value is admitOnlyVlanTagged(2) port will discard untagged frames or Priority-Tagged frames. When admitAll(1), untagged frames or Priority-Tagged fram…
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.9	ColumnpvxVlanPortIngressFiltering	read-only	deprecated	When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept al…
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.10	ColumnpvxVlanPortGvrpFailedRegistrations	read-only	current	The total number of failed GVRP registrations, for any reason, on this port.
1.3.6.1.4.1.18070.2.2.1.14.1.20.1.11	ColumnpvxVlanPortLastBpduOrigin	read-only	current	The Source MAC Address of the last GVRP message received on this port.
1.3.6.1.4.1.18070.2.2.1.14.1.21	TablepvxVlanCurrentTable	not-accessible	current	This table is used to retrieve Vlan related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1	RowpvxVlanCurrentEntry	not-accessible	current	The conceptual row object of the vlan entity.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.1	ColumnpvxVlanCurrentSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.2	ColumnpvxVlanCurrentTimeMark	not-accessible	current	A TimeFilter for this entry.
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.3	ColumnpvxVlanCurrentVlanIdx	not-accessible	current	Represents the VLAN IDs in the system
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.4	ColumnpvxVlanCurrentStatus	read-only	current	This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll…
1.3.6.1.4.1.18070.2.2.1.14.1.21.1.5	ColumnpvxVlanCurrentCreationTime	read-only	current	The value of sysUpTime when this VLAN was created.
1.3.6.1.4.1.18070.2.2.1.14.1.24	TablepvxDynamicVlanPortTable	not-accessible	current	This table is used to configure Vlan Egress port related entries.
1.3.6.1.4.1.18070.2.2.1.14.1.24.1	RowpvxDynamicVlanPortEntry	not-accessible	current	The conceptual row object of the vlan egress port.
1.3.6.1.4.1.18070.2.2.1.14.1.24.1.1	ColumnpvxDynamicVlanPortTimeMark	not-accessible	current	A TimeFilter for this entry.
1.3.6.1.4.1.18070.2.2.1.14.1.24.1.2	ColumnpvxDynamicVlanPortVlanIdx	not-accessible	current	Represents the VLAN IDs in the system
1.3.6.1.4.1.18070.2.2.1.14.1.24.1.3	ColumnpvxDynamicVlanPortTagged	read-only	current	Indicates whether the port is a tagged or a untagged member in the VLAN. tagged - to add the port in the tagged portlist. untagged - to add the port in the unt…
1.3.6.1.4.1.18070.2.2.1.14.1.25	TablepvxStackingPortTable	not-accessible	current	This table allows the administrator to configure which port or ports will be used as teh stacking port or ports between the PacketVXes in the switch.
1.3.6.1.4.1.18070.2.2.1.14.1.25.1	RowpvxStackingPortEntry	not-accessible	current	The conceptual row object of the stacking port.
1.3.6.1.4.1.18070.2.2.1.14.1.25.1.1	ColumnpvxStackingPortOperStatus	read-only	current	Indicates the current operational state of te stacking port.
1.3.6.1.4.1.18070.2.2.1.14.1.25.1.100	ColumnpvxStackingPortRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2	NodepvxBridgeServices
1.3.6.1.4.1.18070.2.2.1.14.2.12	TablepvxFlowTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.12.1	RowpvxFlowEntry	not-accessible	current	The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.1	ColumnpvxFSwitchIdx	not-accessible	current	This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.2	ColumnpvxFIdx	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.3	ColumnpvxFClassificationIdList	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.4	ColumnpvxFMeterId	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.5	ColumnpvxFCoSName	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.12.1.100	ColumnpvxFRowStatus	read-create	current	This object is used to create a new row in the flowClassTable.
1.3.6.1.4.1.18070.2.2.1.14.2.13	TablepvxFlowClassificationTable	not-accessible	current	This table is used to configure the Flow classification on virtual switch. A single value or a range of values can be specified in the set request for the filt…
1.3.6.1.4.1.18070.2.2.1.14.2.13.1	RowpvxFlowClassificationEntry	not-accessible	current	The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.1	ColumnpvxFloClSwitchIdx	not-accessible	current	This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.2	ColumnpvxFloClIdx	not-accessible	current	Index of this flow classification on this switch
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.3	ColumnpvxFloClActionId	read-create	current	The action taken by the switch when this classification is matched; 0 = no action.
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.4	ColumnpvxFloClMeterId	read-create	current	Meter associated with this flow classification, 0 = no meter
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.5	ColumnpvxFloClStatus	read-create	current	The administrative status of this entry
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.6	ColumnpvxFloClEntryType	read-create	current	The administrative status of this entry
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.7	ColumnpvxFloClL2InterfaceRange	read-create	current	Range of interfaces on which this flow classification applies, blank=all interfaces of the form: L2Interface#[-L2Interface#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.8	ColumnpvxFloClCVlanFilter	read-create	current	C-VLAN to match, blank=don't care
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.9	ColumnpvxFloClSVlanFilter	read-create	current	S-VLAN to match, blank=don't care
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.10	ColumnpvxFloClSourceIPFilter	read-create	current	Source IP Address (range or subnet) to match, blank=don't care Of the form: a.b.c.d[-e.f.g.h\|/n]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.11	ColumnpvxFloClDestIPFilter	read-create	current	Destination IP Address (range or subnet) to match, blank=don't care Of the form: a.b.c.d[-e.f.g.h\|/n]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.12	ColumnpvxFloClIPProtocolFilter	read-create	current	IP protocol range to match, blank=don't care of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.13	ColumnpvxFloClEtherTypeFilter	read-create	current	Ethernet Protoocl Type range to match, blank=don't care of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.14	ColumnpvxFloClSourceMacFilter	read-create	current	Source MAC Address (range) to match, blank=don't care Of the form: a.b.c.d.e.f[-g.h.i.j.k.l]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.15	ColumnpvxFloClDestMacFilter	read-create	current	Destination MAC Address (range) to match, blank=don't care Of the form: a.b.c.d.e.f[-g.h.i.j.k.l]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.16	ColumnpvxFloClSourceUDPorTCPFilter	read-create	current	Source TCP or UDP port to match, blank=don't care Of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.17	ColumnpvxFloClDestUDPorTCPFilter	read-create	current	Destination TCP or UDP port to match, blank=don't care Of the form: #[-#]
1.3.6.1.4.1.18070.2.2.1.14.2.13.1.100	ColumnpvxFloClRowStatus	read-create	current	This object is used to create a new row in the flowClassTable.
1.3.6.1.4.1.18070.2.2.1.14.2.14	TablepvxFlowActionsTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.14.1	RowpvxFlowActionsEntry	not-accessible	current	The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.1	ColumnpvxFloActSwitchIdx	not-accessible	current	This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.2	ColumnpvxFloActIdx	not-accessible	current	Index of this flow action on this switch
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.3	ColumnpvxFloActChangePriority	read-create	current	Should the priority of this flow be re-assigned? If true, the value of the pvxFloActNewPriority will be applied as the new priority for the packets in the stre…
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.4	ColumnpvxFloActNewPriority	read-create	current	If the pvxFloActChangePriority field is true, the value of this field will be used as the priority of packets in the flow.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.5	ColumnpvxFloActPacketAction	read-create	current	Should we drop, redirect the packets or let them on their way?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.6	ColumnpvxFloActRedirectToInterfaceIndex	read-create	current	When redirecting, Index of L2 Port to which the system should redirect the flow
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.7	ColumnpvxFloActMirrorType	read-create	current	What Mirroring action to perform on the flow?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.8	ColumnpvxFloActMirrorToInterfaceIndex	read-create	current	Index of L2 interface to which the switch will mirror the flow.
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.9	ColumnpvxFloActSVlanValue	read-create	current	S-VLAN to assign. 0=none
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.10	ColumnpvxFloActCVlanValue	read-create	current	C-VLAN to assign. 0=none
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.11	ColumnpvxFloActSVlanAction	read-create	current	What action should be performed on the S-VLAN?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.12	ColumnpvxFloActCVlanAction	read-create	current	What action should be performed on the C-VLAN
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.13	ColumnpvxFloActGreenAction	read-create	current	What action should the switch take on Green Packets?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.14	ColumnpvxFloActGreenCNGAction	read-create	current	If a green packet of this flow is found, what color should it be changed to?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.15	ColumnpvxFloActRedAction	read-create	current	What action should the switch take on Red Packets?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.16	ColumnpvxFloActRedCNGAction	read-create	current	If a red packet of this flow is found, what color should it be changed to?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.17	ColumnpvxFloActYellowAction	read-create	current	What action should the switch take on Yellow Packets?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.18	ColumnpvxFloActYellowCNGAction	read-create	current	If a yellow packet of this flow is found, what color should it be changed to?
1.3.6.1.4.1.18070.2.2.1.14.2.14.1.100	ColumnpvxFloActRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.15	TablepvxFlowMeterTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.15.1	RowpvxFlowMeterEntry	not-accessible	current	The conceptual row object of the Flow Class Config table.
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.1	ColumnpvxFMSwitchIdx	not-accessible	current	This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.2	ColumnpvxFMMeterIdx	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.3	ColumnpvxFMBWProfileId	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.4	ColumnpvxFMMeterProfileId	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.15.1.100	ColumnpvxFMRowStatus	read-create	current	This object is used to create a new row in the serviceMapTable.
1.3.6.1.4.1.18070.2.2.1.14.2.16	TablepvxFlowStatsTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1	RowpvxFlowStatsEntry	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.1	ColumnpvxFSSwitchIdx	not-accessible	current	This object represents the particular switch Id.
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.2	ColumnpvxFSStatsIdx	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.3	ColumnpvxFSFlowId	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.4	ColumnpvxFSInProfilePackets	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.5	ColumnpvxFSOutOfProfilePackets	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.6	ColumnpvxFSCountOfClassifiedPackets	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.16.1.100	ColumnpvxFSRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.17	TablepvxPbCVidRegistrationTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.17.1	RowpvxPbCVidRegistrationTableEntry	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.1	ColumnpvxPCVRTCVlanIdFrom	not-accessible	current	The beginning of the range of customer VLAN IDs that the system will map to the service VLAN specified in pvxPCVRTSVlanId.
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.2	ColumnpvxPCVRTCVlanIdTo	read-create	current	The end of the range of customer VLAN IDs. To specify a single C-VLAN ID, this value should be equal to pvxPCVRTCVlanFrom. This value may never be smaller than…
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.3	ColumnpvxPCVRTSVlanId	read-create	current	The S-VLAN that the system will assign to any packets that it forwards from this port that had any of the C-VLAN ids in the range pvxPCVRTCVlanIdFrom..pvxPCVRT…
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.4	ColumnpvxPCVRTUntaggedPEP	read-create	current	A boolean indicating frames for this specified Customer VLAN identifier ingress at this specified Customer Edge Port (CEP) should be forwarded untagged through…
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.5	ColumnpvxPCVRTUntaggedCEP	read-create	current	A boolean indicating frames for this specified Customer VLAN identifier should be forwarded untagged through this specified Customer Edge Port (CEP). When it i…
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.6	ColumnpvxPCVRTSource	read-only	current
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.7	ColumnpvxPCVRTMapOperStatus	read-only	current
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.8	ColumnpvxPCVRTXlateOperStatus	read-only	current
1.3.6.1.4.1.18070.2.2.1.14.2.17.1.100	ColumnpvxPCVRTRowStatus	read-create	current	This object is used to create or delete a new row in the pvxPbCVidRegistrationTable.
1.3.6.1.4.1.18070.2.2.1.14.2.18	TablepvxEthServiceTable	not-accessible	current	This table is used to configure services on all the switches in the chassis.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1	RowpvxEthServiceEntry	not-accessible	current	The conceptual row object of the Ethernet Service table. Note the pvxEthSrvcName index is a variable length OCTET STRING object. When encoded as part of the in…
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.1	ColumnpvxEthSrvcSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.2	ColumnpvxEthSrvcName	not-accessible	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.3	ColumnpvxEthSrvcType	read-create	current	This object represents the particular service type. This object must be specifyed during row creation and cannot be changed.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.4	ColumnpvxEthSrvcState	read-create	current	Is this service administratively enabled or disabled?
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.5	ColumnpvxEthSrvcOperState	read-only	current	The current operational state of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.6	ColumnpvxEthSrvcTransportType	read-only	current	For future compatibily; describes the transport mechanism for this service. For the current release we only support providerBridge IEEE802.1ad transport.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.7	ColumnpvxEthSrvcSVLAN	read-create	current	If no value is specified in the row create request, the value defaults to the current reserved SVLAN value.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.8	ColumnpvxEthSrvcSpanTreeInstance	read-create	current	The spanning tree instance for this service. Default is 0
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.9	ColumnpvxEthSrvcMaxUNIs	read-only	current	The maximum number of UNIs that can be associated with this Service. This value is derived from the ServiceType
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.10	ColumnpvxEthSrvcNumUNIs	read-only	current	The number of UNIs currently associated with the Service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.11	ColumnpvxEthSrvcPointedness	read-only	current	Is this a point-to-point or multipoint service
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.12	ColumnpvxEthSrvcFrameSize	read-create	current	The maximum size of a frame transported on this service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.13	ColumnpvxEthSrvcCVidXlate	read-create	current	Do we translate the C-VID on this service? Can only be true if all UNIs have a single C-VID mapped to this service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.14	ColumnpvxEthSrvcMECciInterval	read-create	current	Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent…
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.15	ColumnpvxEthSrvcMECciEnable	read-create	current	If set to true, the MEP will generate CCM messages. Default is set to false by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.16	ColumnpvxEthSrvcMEName	read-create	current	Name of the EVC Maintanence Entity. Maximum length is 6 characters.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.17	ColumnpvxEthSrvcMaxNNIs	read-only	current	The maximum number of NNIs that can be associated with this Service. This value is derived from the ServiceType
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.18	ColumnpvxEthSrvcNumNNIs	read-only	current	The number of NNIs currently associated with the Service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.19	ColumnpvxEthSrvcLockNNIs	read-create	current	If true, the switch will not let any dynamic VLAN protocols, such as GVRP, add NNIs to the Service.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.20	ColumnpvxEthSrvcExceedMaxUNI	read-only	current	This attribute is used to indicate the error condition that the maximum number of NUIs has exceeded for EPLINE or EVPLINE.
1.3.6.1.4.1.18070.2.2.1.14.2.18.1.100	ColumnpvxEthSrvcRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.19	TablepvxServiceUNITable	not-accessible	current	This table binds a UNI to a service and describes the configuration of the UNI-service combination.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1	RowpvxServiceUNIEntry	not-accessible	current	The conceptual row object of the Service UNI table. Note the pvxSrvcUNISrvcName index is a variable length OCTET STRING object. When encoded as part of the Ser…
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.1	ColumnpvxSrvcUNISwitchId	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.2	ColumnpvxSrvcUNIShelfId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.3	ColumnpvxSrvcUNISlotId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.4	ColumnpvxSrvcUNIPortTypeId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.5	ColumnpvxSrvcUNIPortId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.6	ColumnpvxSrvcUNISrvcName	not-accessible	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.7	ColumnpvxSrvcUNINumCVids	read-only	current	The number of C-VIDs associated with this service on this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.8	ColumnpvxSrvcUNIIngressBW	read-create	current	The name of the profile thay specifies the ingress bandwidth for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.9	ColumnpvxSrvcUNIIngressBWperCos	read-create	current	The name of the profile thay specifies the ingress bandwidth per COS Id for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.10	ColumnpvxSrvcUNIEgressBW	read-create	current	The name of the profile thay specifies the egress bandwidth for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.11	ColumnpvxSrvcUNIEgressBWperCos	read-create	current	The name of the profile thay specifies the egress bandwidth per COS Id for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.12	ColumnpvxSrvcUNIUserDefinedMepId	read-create	current	If the value is zero, then the user has not set a MEP ID for the Service UNI and one will be autogenerated by the system. If the user wishes to manually config…
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.13	ColumnpvxSrvcUNIForwarding	read-create	current	Forwarding specification applies only to E-Tree services. It is an indication of whether a UNI is a Leaf port(etree-leaf) or a Root port(normal). The default v…
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.14	ColumnpvxSrvcUNIServiceMap	read-create	current	The name of the profile that specifies the service map filters for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.15	ColumnpvxSrvcUNIFilterSequence	read-create	current	A numerical value used to order service map filter evaluation on a UNI. Lower values are evaluated before higher values
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.16	ColumnpvxSrvcUNIEFPSDEnabled	read-create	current	Indicates if Ethernet Fault Propagation Shut Down (EFPSD) feature is enabled on this service UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.17	ColumnpvxSrvcUNIEFPSDLocalEFPSDState	read-only	current	For service UNIs with EFPSD enabled, indicates if EFPSD is currently engaged on the local UNI. If EFPSD is engaged, the transmitter on the UNI is off.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.18	ColumnpvxSrvcUNISlaMeasurementProfile	read-create	current	The name of the profile that specifies the SLA mesaurement thresholds for this service in this UNI.
1.3.6.1.4.1.18070.2.2.1.14.2.19.1.100	ColumnpvxSrvcUNIRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.20	TablepvxSvidXlateTable	not-accessible	current	This table defines all User Network Interfaces on all switches.
1.3.6.1.4.1.18070.2.2.1.14.2.20.1	RowpvxSvidXlateEntry	not-accessible	current	The conceptual row object of the SvidXlate Table
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.1	ColumnpvxSvidXlateSwitchId	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.2	ColumnpvxSvidXlateShelfId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.3	ColumnpvxSvidXlateSlotId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.4	ColumnpvxSvidXlatePortTypeId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.5	ColumnpvxSvidXlatePortId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.6	ColumnpvxSvidXlateInternalSVid	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.20.1.7	ColumnpvxSvidXlateExternalSVid	read-write	current
1.3.6.1.4.1.18070.2.2.1.14.2.21	NodepvxEcfmService
1.3.6.1.4.1.18070.2.2.1.14.2.21.1	TablepvxMepListTable	not-accessible	current	List of MEPIDs (in any bridge) that belong to the same ME.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1	RowpvxMepListEntry	not-accessible	current	The known MEPs table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.1	ColumnpvxMepListSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.2	ColumnpvxMepListESrvcVlanId	not-accessible	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.3	ColumnpvxMepListIdentifier	not-accessible	current	A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.4	ColumnpvxMepLocalRemoteFlag	read-only	current	A flag indicating whether the MEP is local or remote. Default is set to remoteMEP by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.5	ColumnpvxMepSequenceId	read-only	current
1.3.6.1.4.1.18070.2.2.1.14.2.21.1.1.100	ColumnpvxMepListRowStatus	read-create	current	The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2	TablepvxEcfmMepTable	not-accessible	current	The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a…
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1	RowpvxEcfmMepEntry	not-accessible	current	The MEP table entry
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.1	ColumnpvxEcfmMepSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.2	ColumnpvxEcfmMepShelfId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.3	ColumnpvxEcfmMepSlotId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.4	ColumnpvxEcfmMepPortTypeId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.5	ColumnpvxEcfmMepPortId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.6	ColumnpvxEcfmMepESrvcName	not-accessible	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.7	ColumnpvxEcfmMepIdentifier	read-write	current	A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.8	ColumnpvxEcfmMepDirection	read-write	current	MEP direction. Default is set to up by the system.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.9	ColumnpvxEcfmMepActive	read-write	current	A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functioning.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.10	ColumnpvxEcfmMepAutoGenerateFlag	read-write	current	A Boolean indicating whether the MEP ID is auto-generated by the system. FALSE indicates the user configured the MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.11	ColumnpvxEcfmMepMacAddress	read-only	current	MAC address of the MEP.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.12	ColumnpvxEcfmMepFlushRMepDb	read-write	current	A Boolean indicating whether the remote MEP needs to flush its MEP list or not True indicates that the remote MEP needs to flush and rebuild its MEP lists.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.13	ColumnpvxEcfmMepOutOfService	read-write	current	Adminstrative service that is being or to be performed. True indicates that the operation needs to be performed out-of-service. Otherwise, the operation needs …
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.14	ColumnpvxEcfmMepY1731DefectConditions	read-only	current	A vector of Boolean indicates the defect conditions.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.15	ColumnpvxEcfmMepDefects	read-only	current	A vector of Boolean indicates the defect conditions.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.16	ColumnpvxEcfmMepCcmSequenceErr	read-only	current	The total number of out-of-sequence CCMs received from all remote MEPs.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.17	ColumnpvxEcfmMepSentCcms	read-only	current	Total number of Continuity Check messages transmitted.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.18	ColumnpvxEcfmMepTransmitLtmStatus	read-write	current	A Enumerated value set to 'transmit' to initiate LTM transmission. Set to 'ready' or 'notReady' by the MEP Linktrace Initiator State Machine.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.19	ColumnpvxEcfmMepTransmitLtmTargetMepId	read-write	current	Target MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.20	ColumnpvxEcfmMepTransmitLtmTtl	read-write	current	The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace …
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.21	ColumnpvxEcfmMepTransmitLtmResultOK	read-only	current	Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.22	ColumnpvxEcfmMepTransmitLtmSeqNumber	read-only	current	The LTM Transaction Identifier of the LTM sent. The value returned is undefined if pvxEcfmMepTransmitLtmResultOK is false.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.23	ColumnpvxEcfmMepTransmitLbmStatus	read-write	current	A Enumerated value set to 'transmit'to initiate LBM transmission. Set to 'ready' or 'notReady' by the MEP Loopback Initiator State Machine.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.24	ColumnpvxEcfmMepTransmitLbmDestMepId	read-write	current	Target MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.25	ColumnpvxEcfmMepTransmitLbmCount	read-write	current	Identifies the number of LBMs transmitted
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.26	ColumnpvxEcfmMepTransmitLbmResultOK	read-only	current	Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.27	ColumnpvxEcfmMepY1731LbmCurrentTransId	read-only	current	Identifies the current LBM Transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.28	ColumnpvxEcfmMepLbrIn	read-only	current	Total number of valid, in-order Loopback Replies received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.29	ColumnpvxEcfmMepLbrInOutOfOrder	read-only	current	The total number of valid, out-of-order Loopback Replies received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.30	ColumnpvxEcfmMepLbrBadMsdu	read-only	current	The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.31	ColumnpvxEcfmMepLbrOut	read-only	current	Total number of Loopback Replies transmitted.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.32	ColumnpvxEcfmMepUnexpLtrIn	read-only	current	The total number of unexpected LTRs received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.33	ColumnpvxEcfmMepErrCcmRMepId	read-only	current	Mep Id of the CCM which caused the Error CCM Defect.
1.3.6.1.4.1.18070.2.2.1.14.2.21.2.1.34	ColumnpvxEcfmMepXconnRMepId	read-only	current	Mep Id of the CCM which caused the Xconn CCM Defect
1.3.6.1.4.1.18070.2.2.1.14.2.21.3	TablepvxEcfmMepDbTable	not-accessible	current	The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1	RowpvxEcfmMepDbEntry	not-accessible	current	The MEP Database table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.1	ColumnpvxEcfmMepDbSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.2	ColumnpvxEcfmMepDbVlanId	not-accessible	current	The vlan ID of the ethernet service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.3	ColumnpvxEcfmMepDbLocalMepId	not-accessible	current	A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.4	ColumnpvxEcfmMepDbRemoteMepId	not-accessible	current	A 13 bits value of remote MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.5	ColumnpvxEcfmMepDbRMepState	read-only	current	The operational state of the remote MEP IFF State machines.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.6	ColumnpvxEcfmMepDbMacAddress	read-only	current	The MAC address of the remote MEP.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.7	ColumnpvxEcfmMepDbRMepSwitchName	read-only	current	The name of the remote switch. It is set by the system as PVX-x where 'x' is the switch nubmer.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.8	ColumnpvxEcfmMepDbRMepPortInfo	read-only	current	The port information of the remote port. It is set by the system as a string of shelfNumber/slotNumber/portType/portNumber.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.9	ColumnpvxEcfmMepDbRMepRDI	read-only	current	State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.10	ColumnpvxEcfmMepDbRMepCcmDefect	read-only	current	A Boolean indicating that no CCM has been received from the remote MEP for at least (3.25*CCM time (CCMInterval)) seconds
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.11	ColumnpvxEcfmMepDbRMepPortStatusDefect	read-only	current	True if a Port Status Defect is reported by a remote MEP
1.3.6.1.4.1.18070.2.2.1.14.2.21.3.1.12	ColumnpvxEcfmMepDbRMepIntfStatusDefect	read-only	current	True if an Interface Status Defect is reported by a remote MEP
1.3.6.1.4.1.18070.2.2.1.14.2.21.4	TablepvxEcfmMipTable	not-accessible	current	The Maintenance Intermediate Point (MIP) table. Each row in the table represents a different MIP. A MIP consists two MIP Half Functions (MHFs) on a single Brid…
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1	RowpvxEcfmMipEntry	not-accessible	current	The MIP table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.1	ColumnpvxEcfmMipSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.2	ColumnpvxEcfmMipShelfId	not-accessible	current	The shelf number.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.3	ColumnpvxEcfmMipSlotId	not-accessible	current	The slot number.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.4	ColumnpvxEcfmMipPortTypeId	not-accessible	current	The port type.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.5	ColumnpvxEcfmMipPortId	not-accessible	current	The port number
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.6	ColumnpvxEcfmMipMegLevel	not-accessible	current	The MEG level.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.7	ColumnpvxEcfmMipESrvcVlanId	not-accessible	current	The vlan ID of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.8	ColumnpvxEcfmMipESrvcName	read-only	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.9	ColumnpvxEcfmMipActiveState	read-create	current	A Boolean indicating the administrative state of the MIP. True indicates that the MIP is to function normally, and false that it is to cease functioning.
1.3.6.1.4.1.18070.2.2.1.14.2.21.4.1.100	ColumnpvxEcfmMipRowStatus	read-create	current	The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6	TablepvxY1731LbStatsTable	not-accessible	current	This table extends the MEP table and contains output of loopback or ping transaction. Output includes number of replies recieved, time taken for a reply to com…
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1	RowpvxY1731LbStatsEntry	not-accessible	current	The Loopback Statistics table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.1	ColumnpvxY1731LbStatsSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.2	ColumnpvxY1731LbStatsESrvcName	not-accessible	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.3	ColumnpvxY1731LbStatsIdentifier	not-accessible	current	A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.4	ColumnpvxY1731LbmTransId	not-accessible	current	Transaction Identifier identifies a loopback or ping (LBM)transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.5	ColumnpvxY1731LbStatsLbmOut	read-only	current	Number of LBMs sent in a loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.6	ColumnpvxY1731LbStatsLbrIn	read-only	current	Number of replies (LBR) received in a loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.7	ColumnpvxY1731LbStatsLbrTimeAverage	read-only	current	Average time taken to receive the replies (LBR) for the current loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.8	ColumnpvxY1731LbStatsLbrTimeMin	read-only	current	Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.9	ColumnpvxY1731LbStatsLbrTimeMax	read-only	current	Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.10	ColumnpvxY1731LbStatsTotalResponders	read-only	current	Total Number of Responders which have sent the reply (LBR) for the initiated LBM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.6.1.11	ColumnpvxY1731LbStatsAvgLbrsPerResponder	read-only	current	Average Number of LBR(s) received per Responder.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7	TablepvxEcfmLtrTable	not-accessible	current	This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1	RowpvxEcfmLtrEntry	not-accessible	current	The Linktrace Reply table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.1	ColumnpvxEcfmLtrSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.2	ColumnpvxEcfmLtrVlanId	not-accessible	current	The s-vlan of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.3	ColumnpvxEcfmLtrMepIdentifier	not-accessible	current	A 13 bits value of MEP id.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.4	ColumnpvxEcfmLtrSeqNumber	not-accessible	current	Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.5	ColumnpvxEcfmLtrReceiveOrder	not-accessible	current	An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. pvxEcfmLtrReceiveOrder are assigned sequentially from 1, in t…
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.6	ColumnpvxEcfmLtrTtl	read-only	current	TTL field value for a returned LTR.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.7	ColumnpvxEcfmLtrForwarded	read-only	current	Indicates if a LTM was forwarded by the responding MP.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.8	ColumnpvxEcfmLtrTerminalMep	read-only	current	A boolean value stating whether the forwarded LTM reached a MEP enclosing its ME.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.9	ColumnpvxEcfmLtrRelayAction	read-only	current	Value returned in the Relay Action field.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.10	ColumnpvxEcfmLtrSwitchName	read-only	current	The switch name of the MEP. It is set by the system as PVX-x where 'x' is the switch nubmer.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.11	ColumnpvxEcfmLtrIngressAction	read-only	current	The value returned in the Ingress Action Field of the LTM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.12	ColumnpvxEcfmLtrIngressMac	read-only	current	MAC address returned in the ingress MAC address field.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.13	ColumnpvxEcfmLtrIngressPortInfo	read-only	current	The port information of the ingress port. It is set by the system as a string of shelfNumber/slotNumber/portType/portNumber.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.14	ColumnpvxEcfmLtrEgressAction	read-only	current	The value returned in the Egress Action Field of the LTM.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.15	ColumnpvxEcfmLtrEgressMac	read-only	current	MAC address returned in the egress MAC address field.
1.3.6.1.4.1.18070.2.2.1.14.2.21.7.1.16	ColumnpvxEcfmLtrEgressPortInfo	read-only	current	The port information of the egress port. It is set by the system as a string of shelfNumber/slotNumber/portType/portNumber.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8	TablepvxSLAThroughputTestTable	not-accessible	current	This table sets the parameters to setup SLA throughput test and captures the results.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1	RowpvxSLAThroughputTestEntry	not-accessible	current	The throughput test table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.1	ColumnpvxSLAThroughputTestSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.2	ColumnpvxSLAThroughputTestShelfIdx	not-accessible	current	The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.3	ColumnpvxSLAThroughputTestSlotIdx	not-accessible	current	The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.4	ColumnpvxSLAThroughputTestPortTypeIdx	not-accessible	current	The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.5	ColumnpvxSLAThroughputTestPortIdx	not-accessible	current	The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.6	ColumnpvxSLAThroughputTestESName	not-accessible	current	The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.7	ColumnpvxSLAThroughputTestRMepId	not-accessible	current	Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.8	ColumnpvxSLAThroughputTestRole	read-create	current	Set the test role, initiator or responder.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.9	ColumnpvxSLAThroughputTestInitiatorCmdState	read-create	current	Set the initiator command state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.10	ColumnpvxSLAThroughputTestResponderOpState	read-only	current	Test responder operational state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.11	ColumnpvxSLAThroughputTestFrameSize1	read-create	current	Frame size number 1.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.12	ColumnpvxSLAThroughputTestFrameSize2	read-create	current	Frame size number 2.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.13	ColumnpvxSLAThroughputTestFrameSize3	read-create	current	Frame size number 3.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.14	ColumnpvxSLAThroughputTestFrameSize4	read-create	current	Frame size number 4.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.15	ColumnpvxSLAThroughputTestFrameSize5	read-create	current	Frame size number 5.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.16	ColumnpvxSLAThroughputTestFrameSize6	read-create	current	Frame size number 6.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.17	ColumnpvxSLAThroughputTestSrvcPolicyName	read-create	current	Service policy profile name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.18	ColumnpvxSLAThroughputTestClassMapName	read-create	current	Class map profile name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.19	ColumnpvxSLAThroughputTestBwProfileName	read-create	current	Bandwidth profile name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.20	ColumnpvxSLAThroughputTestSVlanPriority	read-create	current	SLA Throughput test S-Vlan priority.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.21	ColumnpvxSLAThroughputTestCirRateTestResult	read-only	current	Test result, pass or fail. Pass means 100% CIR has been met.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.22	ColumnpvxSLAThroughputTestFrameSize1FarEndThroughput	read-only	current	Frame Size 1 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.23	ColumnpvxSLAThroughputTestFrameSize1NearEndThroughput	read-only	current	Frame Size 1 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.24	ColumnpvxSLAThroughputTestFrameSize2FarEndThroughput	read-only	current	Frame Size 2 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.25	ColumnpvxSLAThroughputTestFrameSize2NearEndThroughput	read-only	current	Frame Size 2 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.26	ColumnpvxSLAThroughputTestFrameSize3FarEndThroughput	read-only	current	Frame Size 3 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.27	ColumnpvxSLAThroughputTestFrameSize3NearEndThroughput	read-only	current	Frame Size 3 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.28	ColumnpvxSLAThroughputTestFrameSize4FarEndThroughput	read-only	current	Frame Size 4 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.29	ColumnpvxSLAThroughputTestFrameSize4NearEndThroughput	read-only	current	Frame Size 4 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.30	ColumnpvxSLAThroughputTestFrameSize5FarEndThroughput	read-only	current	Frame Size 5 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.31	ColumnpvxSLAThroughputTestFrameSize5NearEndThroughput	read-only	current	Frame Size 5 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.32	ColumnpvxSLAThroughputTestFrameSize6FarEndThroughput	read-only	current	Frame Size 6 far end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.33	ColumnpvxSLAThroughputTestFrameSize6NearEndThroughput	read-only	current	Frame Size 6 near end throughput result in Mbps.
1.3.6.1.4.1.18070.2.2.1.14.2.21.8.1.100	ColumnpvxSLAThroughputTestRowStatus	read-create	current	The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9	TablepvxSLAMsmtInitiatorDBTable	not-accessible	current	This table sets the SLA measurement Initiator test command state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1	RowpvxSLAMsmtInitiatorDBEntry	not-accessible	current	The SLA measurement initiator table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.1	ColumnpvxSLAMsmtInitiatorDBSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.2	ColumnpvxSLAMsmtInitiatorDBShelfIdx	not-accessible	current	The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.3	ColumnpvxSLAMsmtInitiatorDBSlotIdx	not-accessible	current	The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.4	ColumnpvxSLAMsmtInitiatorDBPortTypeIdx	not-accessible	current	The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.5	ColumnpvxSLAMsmtInitiatorDBPortIdx	not-accessible	current	The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.6	ColumnpvxSLAMsmtInitiatorDBESName	not-accessible	current	The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.7	ColumnpvxSLAMsmtInitiatorDBRMepId	not-accessible	current	Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.8	ColumnpvxSLAMsmtInitiatorDBCmdState	read-create	current	Set the PM frame loss test command state.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.9	ColumnpvxSLAMsmtInitiatorDBDelayMsmtSVlanPriority	read-create	current	Set the PM frame delay test s-vlan priority.
1.3.6.1.4.1.18070.2.2.1.14.2.21.9.1.100	ColumnpvxSLAMsmtInitiatorDBRowStatus	read-create	current	The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10	TablepvxSLAMsmtResponderDBTable	not-accessible	current	This table keeps a record of responder MEP IDs.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1	RowpvxSLAMsmtResponderDBEntry	not-accessible	current	The SLA measurement responder table entry.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.1	ColumnpvxSLAMsmtResponderDBSwitchIdx	not-accessible	current	The identifier of the ethernet switch instance on which the Ethernet Service SLA is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.2	ColumnpvxSLAMsmtResponderDBShelfIdx	not-accessible	current	The number of the shelf on which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the shelf number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.3	ColumnpvxSLAMsmtResponderDBSlotIdx	not-accessible	current	The number of the slot within which the Ethernet Service SLA targeted for PMs is provisioned. For LAG entities, the slot number is 0.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.4	ColumnpvxSLAMsmtResponderDBPortTypeIdx	not-accessible	current	The type of PacketVX port on which the Ethernet Service SLA facility is provisioned.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.5	ColumnpvxSLAMsmtResponderDBPortIdx	not-accessible	current	The port number of the Ethernet Service SLA.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.6	ColumnpvxSLAMsmtResponderDBESName	not-accessible	current	The Ethernet service name.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.7	ColumnpvxSLAMsmtResponderDBRMepId	not-accessible	current	Remote MEP ID.
1.3.6.1.4.1.18070.2.2.1.14.2.21.10.1.100	ColumnpvxSLAMsmtResponderDBRowStatus	read-create	current	The status of the row.
1.3.6.1.4.1.18070.2.2.1.14.2.22	TablepvxMgmtVLANTable	not-accessible	current	This table describes the Management VLAN service for the switch.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1	RowpvxMgmtVLANEntry	not-accessible	current	A row in the Management VLAN Table. Note that in Provider Bridge mode, a row in this table is auto-created by adding an entry in the pvxEthServiceTable. You ca…
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.1	ColumnpvxMgmtVLANSwitchIdx	not-accessible	current	This object represents the switch on which this Mgmt VLAN runs.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.2	ColumnpvxMgmtVLANSrvcName	not-accessible	current	This is the name of the Mgmt VLAN service. A corresponding entry with this name is in the pvxEthServicesTable
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.3	ColumnpvxMgmtVLANBWProfileName	read-create	current	The name of the bandwidth profile that applies to the management VLAN. Does not apply in provider bridge mode.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.4	ColumnpvxMgmtVLANCVLANId	read-create	current	The Customer VLAN ID with which packets will be tagged when sent on the Mgmt VLAN. If 0, no CVLAN tagging will occur.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.5	ColumnpvxMgmtVLANAddressType	read-create	current	The type of addresses (v4/v6) used in this row of this MIB. Currently only ipv4 is allowed in this table.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.6	ColumnpvxMgmtVLANIpAddress	read-create	current	The IP Address associated with this interface.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.7	ColumnpvxMgmtVLANNetMask	read-create	current	The sub-net mask associated with this interface.
1.3.6.1.4.1.18070.2.2.1.14.2.22.1.100	ColumnpvxMgmtVLANRowStatus	read-create	current	This object is used to create a new row in the MgmtVLAN table.
1.3.6.1.4.1.18070.2.2.1.14.2.23	TablepvxServiceNNITable	not-accessible	current	This table binds a NNI to a service and describes the configuration of the NNI-service combination.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1	RowpvxServiceNNIEntry	not-accessible	current	The conceptual row object of the Service NNI table. Note the pvxSrvcNNISrvcName index is a variable length OCTET STRING object. When encoded as part of the Ser…
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.1	ColumnpvxSrvcNNISwitchId	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.2	ColumnpvxSrvcNNIShelfId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.3	ColumnpvxSrvcNNISlotId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.4	ColumnpvxSrvcNNIPortTypeId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.5	ColumnpvxSrvcNNIPortId	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.6	ColumnpvxSrvcNNISrvcName	not-accessible	current	The name of the service.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.8	ColumnpvxSrvcNNIIngressBW	read-create	current	The name of the profile thay specifies the ingress bandwidth for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.9	ColumnpvxSrvcNNIIngressBWperCos	read-create	current	The name of the profile thay specifies the ingress bandwidth per COS Id for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.10	ColumnpvxSrvcNNIEgressBW	read-create	current	The name of the profile thay specifies the egress bandwidth for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.11	ColumnpvxSrvcNNIEgressBWperCos	read-create	current	The name of the profile thay specifies the egress bandwidth per COS Id for this service in this NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.23.1.100	ColumnpvxSrvcNNIRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.2.24	TablepvxERPSServiceNNITable	not-accessible	current	This table provides configuration for an ERPS NNI.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1	RowpvxERPSServiceNNIEntry	not-accessible	current	The conceptual row object of the ERPS Service NNI table.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.1	ColumnpvxERPSSrvcNNISwitchId	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.2	ColumnpvxERPSSrvcNNIShelfId	not-accessible	current	This object represents the particular shelf id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.3	ColumnpvxERPSSrvcNNISlotId	not-accessible	current	This object represents the particular slot id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.4	ColumnpvxERPSSrvcNNIPortTypeId	not-accessible	current	This object represents the particular port type.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.5	ColumnpvxERPSSrvcNNIPortId	not-accessible	current	This object represents the particular port id.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.6	ColumnpvxERPSSrvcNNIRingProtectLink	read-write	current	This variable indicates whether this NNI is the protection link for the ring. When a port is configured as a RPL port, this node becomes RPL Owner for the ring…
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.7	ColumnpvxERPSSrvcNNIProtectionSwitch	read-write	current	This object identifies the port that will be blocked by enforcing forced or manual switching. Enabling this port configures pvxERSPSrvcProtectionSwitchMode to …
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.8	ColumnpvxERPSSrvcNNIRingPortStatus	read-only	current	This object indicates the port's current status updated by the ERPS control process of this ring.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.9	ColumnpvxERPSSrvcNNISrvcName	read-only	current	The name of the ERPS service this port is part of.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.10	ColumnpvxERPSSrvcNNIRingPortId	read-only	current	The designation of this port w.r.t. the ERPS ring.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.11	ColumnpvxERPSSrvcNNIMEName	read-write	current	The Maintanence Entity Name for the CCMs for this ERPS NNI. Maximum length is 6 characters.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.12	ColumnpvxERPSSrvcNNIRemoteMepId	read-write	current	The MEP Id of the remote end-point of the NNI. 0 indicates that the value should be auto-discovered.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.13	ColumnpvxERPSSrvcNNIECFMInfo	read-only	current	The provisioned information about the ECMF entities in the ring.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.14	ColumnpvxERPSSrvcNNILocalMepId	read-write	current	The MEP Id of the local end-point of the NNI. 0 indicates that the value should be auto-discovered.
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.15	ColumnpvxERPSSrvcNNINeighborPort	read-write	current	This object identifies the RPL Neighbor port of the ring. When a\ port is configured as a RPL Neighbor port, that node becomes RPL Neighbor for that ring. [Ref…
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.16	ColumnpvxERPSSrvcNNINextNeighborPort	read-write	current	This object identifies the RPL Next Neighbor port of the ring. When a port is configured as a RPL Next Neighbor port, that node becomes RPL Next Neighbor for t…
1.3.6.1.4.1.18070.2.2.1.14.2.24.1.17	ColumnpvxERPSSrvcNNIFlushRemoteMEP	read-write	current	A Boolean indicating whether the remote MEP needs to flush its MEP list or not True indicates that the remote MEP needs to flush and rebuild its MEP lists.
1.3.6.1.4.1.18070.2.2.1.14.2.25	TablepvxERPSServiceTable	not-accessible	current	This table is used to configure ERPS service on a particular switch in the chassis.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1	RowpvxERPSServiceEntry	not-accessible	current	The conceptual row object of the ERPS Service.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.1	ColumnpvxERPSSrvcSwitchIdx	not-accessible	current	This object represents the particular switch id.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.2	ColumnpvxERPSSrvcName	not-accessible	current	The name of the ERPS service.
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.3	ColumnpvxERPSSrvcRevertMode	read-write	current	This object identifies whether the ring is operating in revertive or nonRevertive manner. In revertive mode of operation, once the failed link recovers, the da…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.4	ColumnpvxERPSSrvcProtectionSwitchMode	read-write	current	Before configuring this object with 'forceSwitch' or 'manualSwitch', pvxERPSSrvcNNIProtectionSwitch MUST be enabled on one of the NNI ports. When forcedSwitch …
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.5	ColumnpvxERPSSrvcHoldTimer	read-write	current	This object is used to configure the period for the hold timer of this ring. Hold-Off timer will be started when a new defect (SF) is received on this ring. Th…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.6	ColumnpvxERPSSrvcWaitToRestoreTimer	read-write	current	This object is used to configure the period for the Wait to restore timer. This object is applicable only if this ring is operating in the revertive mode of op…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.7	ColumnpvxERPSSrvcGuardTimer	read-write	current	This object is used to configure the period for the guard timer of this ring. This timer is required to prevent reception of outdated R-APS messages. Guard tim…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.8	ColumnpvxERPSSrvcPeriodicTimer	read-write	current	This object is used to configure the periodic timer. Periodic timer is used to configure the transmission interval of R-APS PDUs. Periodic timer is not valid f…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.9	ColumnpvxERPSSrvcPropagateTC	read-write	current	This object is used to Enable/Disable the Propagation of TC in the associated rings, whenever the flush FDB is triggered for this sub-ring. This configuration …
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.10	ColumnpvxERPSSrvcNodeType	read-only	current	This object identifies the node state of this ring node. If one of the NNI is configured as the RPL, then this ring node becomes 'rplOwner', otherwise the node…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.11	ColumnpvxERPSSrvcRingMonitoring	read-only	current	This attribute is the configurations related to the link monitoring entities. The fault monitoring could be using the Y.1731 mechanism or local detection mecha…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.12	ColumnpvxERPSSrvcRingProperty	read-write	current	This attributes indicates the ring property of the service. The 'normal' ring propery indicates that this node supports the regular ring properties for the ser…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.13	ColumnpvxERPSSrvcRingSemState	read-only	current	This object gives the node state as per the G.8032 state event machine. During fault-free operation the state would be in 'idle' state. Any fault condition on …
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.14	ColumnpvxERPSSrvcRingNodeStatus	read-only	current	A 32 bit mask giving the current status of the ring by specifying the events/status currently present: Bit 1 - Signal-failure on Ring Port 1 Bit 2 - Signal-fai…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.15	ColumnpvxERPSSrvcNumRingPorts	read-only	current	This attribute indicates the number of ring ports attached to this ERPS service
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.16	ColumnpvxERPSSrvcSVLAN	read-only	current	VlanID associated with the Eservice
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.17	ColumnpvxERPSSrvcVirtualLink	read-write	current	The set of VIRTUAL-LINKs (vlan-ids) associated with the ERPS Service
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.18	ColumnpvxERPSSrvcWaitToBlockTimer	read-write	current	This object is used to configure the period for Wait to Block timer. This object is effective, only when force switch or manual switch is configured in the rin…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.19	ColumnpvxERPSSrvcCompatibleVersion	read-write	current	This is used to configure the compatible version number of the node in the ring. The ITU-T G.8032/Y.1344 (03//2010) standard states that the default compatible…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.20	ColumnpvxERPSSrvcMultipleFailure	read-write	current	This object is configured in interconnection node of the sub-ring to support the feature 'Minimizing segmentation in interconnected rings' as per Appendix X of…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.21	ColumnpvxERPSSrvcSubRingWithoutVC	read-write	current	This configuration helps to configure the sub-ring to run with or without an RAPS Virtual Channel. When this object is set to 'false', the sub-ring is configur…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.22	ColumnpvxERPSSrvcDownMegLevel	read-write	current	This object identifies the MEG level that will be used on CCM messages sent for DOWN MEPs for this ERPS eservice. This object can only be modified if ERPS serv…
1.3.6.1.4.1.18070.2.2.1.14.2.25.1.23	ColumnpvxERPSSrvcUpMegLevel	read-write	current	This object identifies the MEG level that will be used on CCM messages sent for UP MEPs for this ERPS eservice. This object can only be modified if ERPS servic…
1.3.6.1.4.1.18070.2.2.1.14.3	NodepvxBridgeProfiles
1.3.6.1.4.1.18070.2.2.1.14.3.1	TablepvxBWProfileTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1	RowpvxBWProfileEntry	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.1	ColumnpvxBWPIdx	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.2	ColumnpvxBWPCir	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.3	ColumnpvxBWPCbs	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.4	ColumnpvxBWPEir	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.5	ColumnpvxBWPEbs	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.6	ColumnpvxBWPCoSQueue	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.1.1.100	ColumnpvxBWPRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.2	TablepvxCoSProfileTable	not-accessible	current	This table is used to configure the Class of service on a port of a particular member of a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.3.2.1	RowpvxCoSProfileEntry	not-accessible	current	The conceptual row object of the Cos table.
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.1	ColumnpvxCPIdx	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.2	ColumnpvxCPMaxBandwidth	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.3	ColumnpvxCPMinBandwidth	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.4	ColumnpvxCPWeight	read-create	current	The weight of the queue associated with a CoS for WRR(+SP) and DRR(+SP) queuing algorithms
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.5	ColumnpvxCPQueueAlgo	read-create	current	This object represents the queuing algorithm configured for a particular cos on a virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.3.2.1.100	ColumnpvxCPRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.3	NodepvxCtrlFrmProfileTable
1.3.6.1.4.1.18070.2.2.1.14.3.4	TablepvxFlowMeterProfileTable	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1	RowpvxFlowMeterProfileEntry	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.1	ColumnpvxFMPIdx	not-accessible	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.2	ColumnpvxFMPBWProfileId	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.3	ColumnpvxFMPColorAware	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.4	ColumnpvxFMPMeterType	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.5	ColumnpvxFMPStatsEnabled	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.4.1.100	ColumnpvxFMPRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.5	NodepvxTunnMacAddrProfileTable
1.3.6.1.4.1.18070.2.2.1.14.3.6	TablepvxSchedulerProfileTable	not-accessible	current	This is the scheduler profile table.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1	RowpvxSchedulerProfileEntry	not-accessible	current	The conceptual row object of the Scheduler Profile Table Note the pvxSchedProfName index is a variable length OCTET STRING object. When encoded as part of the …
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.1	ColumnpvxSchedProfName	not-accessible	current	The scheduler profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.2	ColumnpvxSchedProfAlgorithm	read-create	current	The scheduler algorithm. The default value is sp. Once the algorithm is set, changes to this value is not allowed.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.3	ColumnpvxSchedProfWeightQ0	read-create	current	The weight value for queue 0. The default value is 1. However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.4	ColumnpvxSchedProfWeightQ1	read-create	current	The weight value for queue 1. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.5	ColumnpvxSchedProfWeightQ2	read-create	current	The weight value for queue 2. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.6	ColumnpvxSchedProfWeightQ3	read-create	current	The weight value for queue 3. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.7	ColumnpvxSchedProfWeightQ4	read-create	current	The weight value for queue 4. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.8	ColumnpvxSchedProfWeightQ5	read-create	current	The weight value for queue 5. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.9	ColumnpvxSchedProfWeightQ6	read-create	current	The weight value for queue 6. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.10	ColumnpvxSchedProfWeightQ7	read-create	current	The weight value for queue 7. The default value is 1.However, in wrr and drr mode, the lowerest value can only be 1.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.11	ColumnpvxSchedProfMinBwQ0	read-create	current	The minmum bandwidth for Queue 0. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.12	ColumnpvxSchedProfMaxBwQ0	read-create	current	The maximum bandwidth for Queue 0. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.13	ColumnpvxSchedProfMinBwQ1	read-create	current	The minmum bandwidth for Queue 1. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.14	ColumnpvxSchedProfMaxBwQ1	read-create	current	The maximum bandwidth for Queue 1. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.15	ColumnpvxSchedProfMinBwQ2	read-create	current	The minmum bandwidth for Queue 2. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.16	ColumnpvxSchedProfMaxBwQ2	read-create	current	The maximum bandwidth for Queue 2. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.17	ColumnpvxSchedProfMinBwQ3	read-create	current	The minmum bandwidth for Queue 3. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.18	ColumnpvxSchedProfMaxBwQ3	read-create	current	The maximum bandwidth for Queue 3. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.19	ColumnpvxSchedProfMinBwQ4	read-create	current	The minmum bandwidth for Queue 4. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.20	ColumnpvxSchedProfMaxBwQ4	read-create	current	The maximum bandwidth for Queue 4. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.21	ColumnpvxSchedProfMinBwQ5	read-create	current	The minmum bandwidth for Queue 5. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.22	ColumnpvxSchedProfMaxBwQ5	read-create	current	The maximum bandwidth for Queue 5. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.23	ColumnpvxSchedProfMinBwQ6	read-create	current	The minmum bandwidth for Queue 6. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.24	ColumnpvxSchedProfMaxBwQ6	read-create	current	The maximum bandwidth for Queue 6. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.25	ColumnpvxSchedProfMinBwQ7	read-create	current	The minmum bandwidth for Queue 7. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.26	ColumnpvxSchedProfMaxBwQ7	read-create	current	The maximum bandwidth for Queue 7. The default value is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.27	ColumnpvxSchedProfMTUQuanta	read-create	current	The attribute is only used by drr, or sp_drr scheduler mode. Default is 2Kbyte.
1.3.6.1.4.1.18070.2.2.1.14.3.6.1.100	ColumnpvxSchedProfRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.7	TablepvxPriorityTCMapTable	not-accessible	current	A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1	RowpvxPriorityTCMapEntry	not-accessible	current	The conceptual row object of the Priority Traffic Class Map Profile Table. Note the pvxPriorityTCMapName index is a variable length OCTET STRING object. When e…
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.1	ColumnpvxPriorityTCMapName	not-accessible	current	The scheduler profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.2	ColumnpvxPriority7TrafficClass	read-create	current	The traffic class for priority 7. Default is 7.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.3	ColumnpvxPriority6TrafficClass	read-create	current	The traffic class for priority 6. Default is 6.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.4	ColumnpvxPriority5TrafficClass	read-create	current	The traffic class for priority 5. Default is 5.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.5	ColumnpvxPriority4TrafficClass	read-create	current	The traffic class for priority 4. Default is 4.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.6	ColumnpvxPriority3TrafficClass	read-create	current	The traffic class for priority 3. Default is 3.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.7	ColumnpvxPriority2TrafficClass	read-create	current	The traffic class for priority 2. Default is 2.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.8	ColumnpvxPriority1TrafficClass	read-create	current	The traffic class for priority 1. Default is 0.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.9	ColumnpvxPriority0TrafficClass	read-create	current	The traffic class for priority 0. Default is 1.
1.3.6.1.4.1.18070.2.2.1.14.3.7.1.100	ColumnpvxPriorityTCMapRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.8	TablepvxPCPEncDecProfileTable	not-accessible	current	This table contains information about Priority Code Point Enable and Decoding for a Port of a provider bridge.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1	RowpvxPCPEncDecProfEntry	not-accessible	current	The conceptual row object of the PCP Encoding Decoding Profile Table Note the pvxPCPEncDecProfileName index is a variable length OCTET STRING object. When enco…
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.1	ColumnpvxPCPEncDecProfileName	not-accessible	current	The scheduler profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.2	ColumnpvxPCPEncDecSelectRow	read-create	current	The attribute is used to select one of the four default profiles: 8P0D, 7P1D, 6P2D, or 5P3D. Default value is 8P0D.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.3	ColumnpvxPCPEncPriority7	read-create	current	The encoding value for this priority. Default is 7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.4	ColumnpvxPCPEncPriority7DE	read-create	current	The encoding value for this priority. Default is 7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.5	ColumnpvxPCPEncPriority6	read-create	current	The encoding value for this priority. Default is 6.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.6	ColumnpvxPCPEncPriority6DE	read-create	current	The encoding value for this priority. Default is 6.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.7	ColumnpvxPCPEncPriority5	read-create	current	The encoding value for this priority. Default is 5.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.8	ColumnpvxPCPEncPriority5DE	read-create	current	The encoding value for this priority. Default is 5.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.9	ColumnpvxPCPEncPriority4	read-create	current	The encoding value for this priority. Default is 4.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.10	ColumnpvxPCPEncPriority4DE	read-create	current	The encoding value for this priority. Default is 4.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.11	ColumnpvxPCPEncPriority3	read-create	current	The encoding value for this priority. Default is 3.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.12	ColumnpvxPCPEncPriority3DE	read-create	current	The encoding value for this priority. Default is 3.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.13	ColumnpvxPCPEncPriority2	read-create	current	The encoding value for this priority. Default is 2.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.14	ColumnpvxPCPEncPriority2DE	read-create	current	The encoding value for this priority. Default is 2.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.15	ColumnpvxPCPEncPriority1	read-create	current	The encoding value for this priority. Default is 1.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.16	ColumnpvxPCPEncPriority1DE	read-create	current	The encoding value for this priority. Default is 1.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.17	ColumnpvxPCPEncPriority0	read-create	current	The encoding value for this priority. Default is prioirty 0.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.18	ColumnpvxPCPEncPriority0DE	read-create	current	The encoding value for this priority. Default is prioirty 0.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.19	ColumnpvxPCPDecPriority7	read-create	current	The decoding value for this priority. Default is prioirty7.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.20	ColumnpvxPCPDecPriority6	read-create	current	The decoding value for this priority. Default is prioirty6.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.21	ColumnpvxPCPDecPriority5	read-create	current	The decoding value for this priority. Default is prioirty5.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.22	ColumnpvxPCPDecPriority4	read-create	current	The decoding value for this priority. Default is prioirty4.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.23	ColumnpvxPCPDecPriority3	read-create	current	The decoding value for this priority. Default is prioirty3.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.24	ColumnpvxPCPDecPriority2	read-create	current	The decoding value for this priority. Default is prioirty2.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.25	ColumnpvxPCPDecPriority1	read-create	current	The decoding value for this priority. Default is prioirty1.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.26	ColumnpvxPCPDecPriority0	read-create	current	The decoding value for this priority. Default is prioirty0.
1.3.6.1.4.1.18070.2.2.1.14.3.8.1.100	ColumnpvxPCPEncDecRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.9	TablepvxDscpPHBProfileTable	not-accessible	current	This table defines internal priority settings for the DSCP definitions in the TOS byte in IPV4 header.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1	RowpvxDscpPHBProfileEntry	not-accessible	current	The conceptual row object of the DSCP PHB Profile Table Note the pvxDscpPHBProfileName index is a variable length OCTET STRING object. When encoded as part of …
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.1	ColumnpvxDscpPHBProfileName	not-accessible	current	A string for profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.2	ColumnpvxDscpClassSelector7	read-create	current	This attribute assigns the internal priority value for DSCP class selector 7. Default priority is set to 7.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.3	ColumnpvxDscpClassSelector6	read-create	current	This attribute assigns the internal priority value for DSCP class selector 6. Default priority is set to 6.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.4	ColumnpvxDscpClassSelector5	read-create	current	This attribute assigns the internal priority value for DSCP class selector 5. Default priority is set to 5.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.5	ColumnpvxDscpClassSelector4	read-create	current	This attribute assigns the internal priority value for DSCP class selector 4. Default priority is set to 4.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.6	ColumnpvxDscpClassSelector3	read-create	current	This attribute assigns the internal priority value for DSCP class selector 3. Default priority is set to 3.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.7	ColumnpvxDscpClassSelector2	read-create	current	This attribute assigns the internal priority value for DSCP class selector 2. Default priority is set to 2.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.8	ColumnpvxDscpClassSelector1	read-create	current	This attribute assigns the internal priority value for DSCP class selector 1. Default priority is set to 0.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.9	ColumnpvxDscpClassBestEffort	read-create	current	This attribute assigns the internal priority value for DSCP best effort. Default priority is set to 1.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.10	ColumnpvxDscpAssuredFwd1y	read-create	current	This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 1, drop preference value of 1,2, or 3. Default prior…
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.11	ColumnpvxDscpAssuredFwd2y	read-create	current	This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 2, drop preference value of 1,2, or 3. Default prior…
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.12	ColumnpvxDscpAssuredFwd3y	read-create	current	This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 3, drop preference value of 1,2, or 3. Default prior…
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.13	ColumnpvxDscpAssuredFwd4y	read-create	current	This attribute assigns the internal priority value for DSCP assured forwarding with IP precedence value of 4, drop preference value of 1,2, or 3. Default prior…
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.14	ColumnpvxDscpExpeditedFwd	read-create	current	This attribute assigns the internal priority value for DSCP expedited forwarding. Default priority is set to 7.
1.3.6.1.4.1.18070.2.2.1.14.3.9.1.100	ColumnpvxDscpPHBProfileRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.10	TablepvxBandwidthProfileTable	not-accessible	current	This table is used to configure the Class of service bandwidth paramaters.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1	RowpvxBandwidthProfileEntry	not-accessible	current	The conceptual row object of the Bandwidth Profile Table Note the pvxBandwidthProfileName index is a variable length OCTET STRING object. When encoded as part …
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.1	ColumnpvxBandwidthProfileName	not-accessible	current	A string for profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.2	ColumnpvxBWCnfrmActionChangeDscp	read-create	current	This field configures the DSCP value for profile conformance action. Default is -1, means do not use this field.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.3	ColumnpvxBWCnfrmActionChangeTOSFrmPri	read-create	current	This field configures the TOS frame priority for profile conformance action. 1: change, 2: do not change, 3: not defined. Default is 3, means do not use this f…
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.8	ColumnpvxBWExceedActionChangeDscp	read-create	current	This field configures the DSCP value for profile exceed action. Default is -1, means ignore this action.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.13	ColumnpvxBWMeterColorAware	read-create	current	This field indicates whether color-aware or color-blind proprety is employed. Default is color-blind.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.14	ColumnpvxBWMeterMode	read-create	current	This field configures meter enging schemes. The value can be single-rate Three-Color Marker, or two-rate Three-Color Marker, or not used. Default is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.15	ColumnpvxBWMeterCir	read-create	current	This field defines Committed Information Rate, in kbps.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.16	ColumnpvxBWMeterCbs	read-create	current	This field defines Committed Burst Size, in kilobytes.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.17	ColumnpvxBWMeterEir	read-create	current	This field defines Excess Information Rate, in kbps.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.18	ColumnpvxBWMeterEbs	read-create	current	This field defines Excess Burst Size, in kilobytes.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.19	ColumnpvxBWSetInternalPriority	read-create	current	This field defines internal priority for policy actions. Default is set to -1 by the switch, which indicates that this fields is ignored.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.20	ColumnpvxBWExceedActionSetDEI	read-create	current	This field configures frame's DEI bit for profile exceed action. 1: set, 2: do not set, 3: not defined. Default is 1, means set DEI bit for frames exceed rate.
1.3.6.1.4.1.18070.2.2.1.14.3.10.1.100	ColumnpvxBandwidthProfileRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.11	TablepvxClassMapProfileTable	not-accessible	current	The table configures filter actions for each Class of Service.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1	RowpvxClassMapProfileEntry	not-accessible	current	The conceptual row object of the Class MAP Profile Table. Note the pvxClassMapProfileName index is a variable length OCTET STRING object. When encoded as part …
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.1	ColumnpvxClassMapProfileName	not-accessible	current	A string for profile name.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.2	ColumnpvxClassMapType	read-create	current	This field indicates whether this profile is for ingress Class of Service or egress Class of Service.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.3	ColumnpvxClassMapMatchType	read-create	current	This field defines filter action. It can be match-all, or match any. Default is matchAll.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.4	ColumnpvxClassMapCVlanFilter	read-create	current	This field defines the Customer vlan filter for this class of servcie. Default is -1, means ignore this field. If pvxClassMapCVlanEndFilter is unused, this val…
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.5	ColumnpvxClassMapSVlanFilter	read-only	deprecated	This field defines the Service VLAN filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.6	ColumnpvxClassMapCVlanPriFilter	read-create	current	This field defines the Customer vlan priority filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.7	ColumnpvxClassMapSVlanPriFilter	read-create	current	This field defines the Servicre vlan priority filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.8	ColumnpvxClassMapSrcIpFilter	read-create	current	This field defines the Source IP filter for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.9	ColumnpvxClassMapSrcIpNetMaskFilter	read-create	current	This field defines the Network Mask filter of source IP for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.10	ColumnpvxClassMapDstIpFilter	read-create	current	This field defines the Destination IP filter for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.11	ColumnpvxClassMapDstIpNetMaskFilter	read-create	current	This field defines the Network Mask filter of destination IP for this class of servcie. Defult is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.12	ColumnpvxClassMapIpProtocolFilter	read-create	current	This field defines the IP protocol filter for this class of servcie. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.13	ColumnpvxClassMapDscpFilter	read-create	current	This field defines the DSCP filter for this class of servcie. Default is -1, means the field is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.14	ColumnpvxClassMapL4SrcPortFilter	read-create	current	This field defines the Layer 4 source port filter for this class of servcie. Default is -1, means the field is not used. If pvxClassMapL4SrcPortEndFilter is un…
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.15	ColumnpvxClassMapL4DstPortFilter	read-create	current	This field defines the Layer 4 destinatin port filter for this class of servcie. Default is -1, means the field is not used. If pvxClassMapL4DstPortEndFilter i…
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.16	ColumnpvxClassMapTcpControlFilter	read-create	current	This field defines the Tcp control filter for this class of servcie. Default is -1, means the field is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.17	ColumnpvxClassMapSrcMACAddrFilter	read-create	current	This field defines the Source MAC address filter for this class of servcie. Default is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.18	ColumnpvxClassMapDstMACAddrFilter	read-create	current	This field defines the Destination MAC address filter for this class of servcie. Default is an empty string.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.19	ColumnpvxClassMapEtherTypeFilter	read-create	current	This field defines the ethernet address type filter for this class of servcie. Default is -1, means the filter is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.20	ColumnpvxClassMapSrcMACMaskFilter	read-create	current	This field defines the source MAC address mask. Default is set to 0, which indicates the source MAC address filter is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.21	ColumnpvxClassMapDstMACMaskFilter	read-create	current	This field defines the destination MAC address mask. Default is set to 0, which indicates the destination MAC address filter is not used.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.22	ColumnpvxClassMapL4SrcPortEndFilter	read-create	current	This field defines the Layer 4 source port filter for this class of service. Default is -1, means the field is not used. When specified this value MUST be grea…
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.23	ColumnpvxClassMapL4DstPortEndFilter	read-create	current	This field defines the Layer 4 destination port filter for this class of service. Default is -1, means the field is not used. When specified this value MUST be…
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.24	ColumnpvxClassMapCVlanEndFilter	read-create	current	This field s used to define end point of range of C-VLANs which will be part of this class of service. Default is -1, means ignore this field.
1.3.6.1.4.1.18070.2.2.1.14.3.11.1.100	ColumnpvxClassMapProfileRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.12	TablepvxPolicyMapProfileTable	not-accessible	current	Policy Map Profile Table.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1	RowpvxPolicyMapProfileEntry	not-accessible	current	This table contains Class profile identifier to policy identifier mapping. One policy identifier can be associated with multiple Class profiles. Note that both…
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.1	ColumnpvxPolicyMapPolicyName	not-accessible	current	The policy map profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.2	ColumnpvxPolicyMapClassMapName	not-accessible	current	The class map profile applied to this policy.
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.3	ColumnpvxPolicyMapBWProfileName	read-create	current	The bandwidth profile used for this policy. For ClassMap profiles of type service-Map, this parameter MUST be an empty string. For all other ClassMap profile t…
1.3.6.1.4.1.18070.2.2.1.14.3.12.1.100	ColumnpvxPolicyMapProfileRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.13	TablepvxControlFrameProfileTable	not-accessible	current	This table is used to configure the Layer 2 control profile on a particular virtual switch.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1	RowpvxControlFrameProfileEntry	not-accessible	current	The conceptual row object of the Control Frame profile Table. Note the pvxControlFrameProfileTable index is a variable length OCTET STRING object. When encoded…
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.1	ColumnpvxControlFrameProfileName	read-create	current	Control frame profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.2	ColumnpvxControlFrameProfileLacp	read-create	current	This attributes defined the control action to LACP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.3	ColumnpvxControlFrameProfileStp	read-create	current	This attributes defined the control action to STP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.4	ColumnpvxControlFrameProfileDot1x	read-create	current	This attributes defined the control action to Dot1x protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.5	ColumnpvxControlFrameProfileGvrp	read-create	current	This attributes defined the control action to GVRP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.6	ColumnpvxControlFrameProfileGmrp	read-create	current	This attributes defined the control action to GMRP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.7	ColumnpvxControlFrameProfileLldp	read-create	current	This attributes defined the control action to LLDP protocol.
1.3.6.1.4.1.18070.2.2.1.14.3.13.1.100	ColumnpvxControlFrameProfileRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14	TablepvxTunnelMacAddrProfileTable	not-accessible	current	This table is used to control L2 tunneling Mac addresses.
1.3.6.1.4.1.18070.2.2.1.14.3.14.1	RowpvxTunnelMacAddrProfileEntry	not-accessible	current	The conceptual row object of the Tunnel MAC Address Profile Table Note the pvxTMAPName index is a variable length OCTET STRING object. When encoded as part of …
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.1	ColumnpvxTMAPName	read-create	current	Tunnel MAC address profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.2	ColumnpvxTMAPDot1xTunnMacAddr	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.3	ColumnpvxTMAPLacpTunnMacAddr	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.4	ColumnpvxTMAPStpTunnMacAddr	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.5	ColumnpvxTMAPGvrpTunnMacAddr	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.6	ColumnpvxTMAPGmrpTunnMacAddr	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.7	ColumnpvxTMAPLldpTunnMacAddr	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.14.1.100	ColumnpvxTMAPRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.3.15	TablepvxSLAMeasurementProfileTable	not-accessible	current	This table is used to control Ethernet service SLA measurement.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1	RowpvxSLAMeasurementProfileEntry	not-accessible	current	The conceptual row object for the SLA measurement profile.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.1	ColumnpvxSLAMsmtProfileName	not-accessible	current	SLA measurement profile name string.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.2	ColumnpvxSLAMsmtThresholdFarEndLossRatio	read-create	current	Threshold for the far end farme loss ratio. It is a percentage value multiply with one thousand.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.3	ColumnpvxSLAMsmtThresholdNearEndLossRatio	read-create	current	Threshold for the near end farme loss ratio. It is a percentage value multiply with one thousand.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.4	ColumnpvxSLAMsmtThresholdDelayMaximum	read-create	current	Two-way delay maximum in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.5	ColumnpvxSLAMsmtThresholdDelayAverage	read-create	current	Two-way delay average in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.6	ColumnpvxSLAMsmtThresholdDelayVarMaximum	read-create	current	Two-way delay variation maximum in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.7	ColumnpvxSLAMsmtThresholdDelayVarAverage	read-create	current	Two-way delay variation average in microseconds.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.8	ColumnpvxSLAMsmtMonitorPeriod	read-create	current	Monitor period, 15-min or 24-hour.
1.3.6.1.4.1.18070.2.2.1.14.3.15.1.100	ColumnpvxSLAMsmtRowStatus	read-create	current
1.3.6.1.4.1.18070.2.2.1.14.4.1.1	ScalarmstpGlobalErrType	accessible-for-notify	current	Used within the Trap Notification PDU. It returns the following values memfail - memory allocation failure bufffail - buffer allocation failure
1.3.6.1.4.1.18070.2.2.1.14.4.1.2	ScalarmstpGeneralEvtType	accessible-for-notify	current	Used within the Trap Notification PDU. It returns the following values up - protocol up down - protocol down
1.3.6.1.4.1.18070.2.2.1.14.4.1.3	ScalarmstpProtocolMigrationType	accessible-for-notify	current	Used within the Trap Notification PDU. Port protocol migration type occured in the port.
1.3.6.1.4.1.18070.2.2.1.14.4.1.4	ScalarmstpPacketErrType	accessible-for-notify	current	Used within the Trap Notification PDU. Type of invalid packet received in each of the port
1.3.6.1.4.1.18070.2.2.1.14.4.1.5	ScalarmstpPacketErrValue	accessible-for-notify	current	Used within the Trap Notification PDU. Packet error value corresponding to the above type.
1.3.6.1.4.1.18070.2.2.1.14.5	NodepvxBridgeGVRP
1.3.6.1.4.1.18070.2.2.2.1.23.0.1	NotificationmstpProtocolGeneralEvt		current	Generated when any of the general events like protocol up or protocol down occurs.
1.3.6.1.4.1.18070.2.2.2.1.23.0.2	NotificationmstpNewRootEvt		current	Generated whenever a new root bridge is selected in the topology.
1.3.6.1.4.1.18070.2.2.2.1.23.0.3	NotificationmstpTopologyChangeEvt		current	Generated when topology change is detected
1.3.6.1.4.1.18070.2.2.2.1.23.0.4	NotificationmstpProtocolMigrationEvt		current	Generated when port protocol migration happens in the port.
1.3.6.1.4.1.18070.2.2.2.1.23.0.5	NotificationmstpInvalidPacketRcvdEvt		current	Generated when port protocol migration happens in the port.
1.3.6.1.4.1.18070.2.2.2.1.23.0.6	NotificationmstpRegionConfigChangeEvt		current	Generated when the MST region�s configuration identifier changes.
1.3.6.1.4.1.18070.2.2.2.1.23.0.7	NotificationmstpRoleChangeEvt		current	Generated whenever a new role is selected for the port.
1.3.6.1.4.1.18070.2.2.2.1.26.0.1	NotificationpvxESrvcBWPrflBDWUtlzTcaEvt		current	This trap provides a threshold crossing alert when the bandwidth utilization rate of a perEVC or perCoS instance exceeds a configured threshold.
1.3.6.1.4.1.18070.2.2.2.1.27.0.1	NotificationpvxESrvcOperStateChangeEvt		current	This trap provides an ethernet service operational state change alert.
1.3.6.1.4.1.18070.2.2.2.1.28.0.1	NotificationpvxERPSSrvcNNIProtectionSwitchChangeEvent		current	This trap provides an ERPS service ring port state change alert.
1.3.6.1.4.1.18070.2.2.2.1.29.0.1	NotificationpvxERPSSrvcRingSemStateChangeEvent		current	This trap provides an ERPS service sem state change alert.
1.3.6.1.4.1.18070.2.2.2.1.29.0.2	NotificationpvxERPSSrvcConfigFailEvent		current	This trap indicates a failure occurred while programming the hardware to capture R-APS messages. The ERPS ring will not function if this trap occurs.
1.3.6.1.4.1.18070.2.2.2.1.29.0.3	NotificationpvxERPSSrvcTimerStartEvent		current	This trap indicates a failure starting one of the ERPS timers. The ERPS ring will not function correctly after this trap occurs.
1.3.6.1.4.1.18070.2.2.2.1.30.0.1	NotificationpvxSlaMeasurementTcaEvt		current	This trap provides a threshold crossing alert for a performance monitoring statistic for the PVX SLA measurement.
1.3.6.1.4.1.18070.2.2.2.1.32.0.1	NotificationpvxSrvcUNIEFPSDLocalEFPSDStateChangeEvent		current	This trap provides an Local EFPSD state change alert.
1.3.6.1.4.1.18070.2.2.2.1.36	NodecfmRMepStateChangeEvtNotifications
1.3.6.1.4.1.18070.2.2.2.1.36.0.1	NotificationcfmRMepStateChangeEvt		deprecated	A cfmRMepStateChangeEvt notification is sent when a remote MEP changes its state.
1.3.6.1.4.1.18070.2.2.2.1.36.0.2	NotificationcfmRMepStateChangeV2Evt		current	A cfmRMepStateChangeEvt notification is sent when a remote MEP changes its state.
1.3.6.1.4.1.18070.2.2.2.1.37	NodepvxVlanPortLastBpduOriginChangeEvtNotifications
1.3.6.1.4.1.18070.2.2.2.1.37.0.1	NotificationpvxVlanPortLastBpduOriginChangeEvt		current	A pvxVlanPortLastBpduOriginChangeEvt notification is sent when the Source MAC Address of the last GVRP message received on this port changes.
1.3.6.1.4.1.18070.2.2.2.1.38	NodepvxVlanPortAddDynamicVlanEvtNotifications
1.3.6.1.4.1.18070.2.2.2.1.38.0.1	NotificationpvxVlanPortAddDynamicVlanEvt		current	A pvxVlanPortAddDynamicVlanEvt notification is sent when a port is added to a VLAN in a dynamic VLAN table.
1.3.6.1.4.1.18070.2.2.2.1.39	NodepvxVlanPortRemoveDynamicVlanEvtNotifications
1.3.6.1.4.1.18070.2.2.2.1.39.0.1	NotificationpvxVlanPortRemoveDynamicVlanEvt		current	A pvxVlanPortRemoveDynamicVlanEvt notification is sent when a port is removed from a VLAN in a dynamic VLAN table.
1.3.6.1.4.1.18070.2.2.2.2.22.0.1	NotificationresourceUnavailableCond		current	Generated when any of the error events like memory failure or buffer failure occurs.
1.3.6.1.4.1.18070.2.2.2.2.22.0.2	NotificationresourceUnavailableClear		current	Generated when any of the error events like memory failure or buffer failure clears.
1.3.6.1.4.1.18070.2.2.2.2.23.0.1	NotificationlagLinkDownCond		current	PVX LAG link down.
1.3.6.1.4.1.18070.2.2.2.2.23.0.2	NotificationlagLinkDownClear		current	PVX LAG link down has cleared.
1.3.6.1.4.1.18070.2.2.2.2.29.0.1	NotificationpvxERPSSrvcVersionMismatchCond		current	This trap indicates a misconfiguration in the ERPS ring. This node is configured for one version of ERPS and is receiving packets from a node configured to run…
1.3.6.1.4.1.18070.2.2.2.2.29.0.2	NotificationpvxERPSSrvcVersionMismatchClear		current	This trap indicates a misconfiguration in the ERPS ring is cleared
1.3.6.1.4.1.18070.2.2.2.2.29.0.3	NotificationpvxERPSSrvcFOPProvisionMismatchCond		current	This trap indicates a misconfiguration in the ERPS ring. The RPL Owner has received a R-APS (NR,RB) packet from another node that believes it is the RPL Owner.
1.3.6.1.4.1.18070.2.2.2.2.29.0.4	NotificationpvxERPSSrvcFOPProvisionMismatchClear		current	This trap indicates a misconfiguration in the ERPS ring is cleared.
1.3.6.1.4.1.18070.2.2.2.2.30.0.1	NotificationswitchMemberStkPortDownCond		current	Generated when a switch member stacking port is down.
1.3.6.1.4.1.18070.2.2.2.2.30.0.2	NotificationswitchMemberStkPortDownClear		current	Generated when a switch member stacking port comes in service.

Type Definitions

Name	Syntax	Status	Description
PvxCVidMapOperStatus	INTEGER { programmed (1), notProgrammed (2) }	current
PvxEcfmConfigErrors	BITS { cfmLeak(0), conflictingVids(1), excessiveLevels(2), overlappedLevels(3) }	current	While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associa…
PvxEcfmEgressActionFieldValue	INTEGER { egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) }	current	Possible values returned in the egress action field.
PvxEcfmIngressActionFieldValue	INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) }	current	Possible values returned in the ingress action field.
PvxEcfmMepDefects	BITS { remoteMepDefect(0), macStatusDefect(1), remoteCCMDefect(2), errorCCMDefect(3), xConnCCMDefect(4) }	current	A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: remoteMepDefect(1) A remote MEP is reported the RDI bit in its last CCM. macStatusDefect(2) Eithe…
PvxEcfmRelayActionFieldValue	INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3) }	current	Possible values the Relay action field can take.
PvxEcfmRemoteMepState	INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) }	current	Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated …
PvxEcfmTransmitStatus	INTEGER { ready (1), notReady (2), transmit (3) }	current	An enumerated value indicates whether LBM or LTM trasmission can be initiated. ready(1) Indicates LTM or LBM transmission can be initiated. notReady(2) Indicates LTM or LBM transmission can not be initiated. transmit(3)…
PvxErpsVirtualLinkList	DisplayString (SIZE(0..64))	current	VIRTUAL-LINK list in the format of vlan-ids delimited by comas. for example: 100,200,300
PvxESrvcBWPrflPMThresholdLevelType	INTEGER { min15CIR (1), min15EIR (2), day1CIR (3), day1EIR (4) }	current	The type of threshold level used to generate threshold crossing alerts against perEVC and perCoS instances.
PvxL2Port	DisplayString	current	Port list in the format of switch/shelf/slot/porttype/portNum. switch: 1 - 11 shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
PvxL2PortList	DisplayString	current	Port list in the format of switch/shelf/slot/porttype/portNum. switch: 1 - 11 shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
PvxMSTPVlanList	OCTET STRING (SIZE (0..128))	current	a binary string representation
PvxPCPDecodingList	INTEGER { priority7 (1), prioirty7-DE (2), priority6 (3), priority6-DE (4), priority5 (5), priority5-DE (6), priority4 (7), priority4-DE (8), priority3 (9), priority3-DE (10), priority2 (11), priority2-DE (12), priority1 (13), priority1-DE (14), priority0 (15), priority0-DE (16)}	current	A 12-bit VLAN ID used in the VLAN Tag header.
PvxPhyPort	DisplayString	current	Port list in the format of shelf/slot/porttype/portNum. shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
PvxPhyPortList	DisplayString	current	Port list in the format of shelf/slot/porttype/portNum. shelf: 1, 11, 21, or 31 shot: 1 - 20 porttype: 1 - GE, 2 - 10GE portnum: 1-24
PvxPolicyDropAction	INTEGER { drop (1), doNotDrop (2), notDefined (3)}	current	Policy drop action definiiton.
PvxQoSColorMode	INTEGER { color-aware (1), color-blind (2)}	current	Color aware action definiiton.
PvxQoSPmCounterMode	INTEGER { count-violate (1), count-cnfrm (2), count-cnfrmAndExceed (3), count-violateAndExceec (4), notUsed (5)}	current	Counter mode for policy action definiiton.
PvxStackingPortCommState	INTEGER { noConnection (1), connectionOk (2) }	current	Virtual switch stacking port communication state values.
PvxVlanId	INTEGER (1..4094)	current	A 12-bit VLAN ID used in the VLAN Tag header.
PvxVLANPortList	DisplayString	current	Port list in the format of shelf/slot{ports}. for example: L{1,4};1/1{g2,g6,x1} or: 11/3{g1,g2,g3,x2} The sub-list indicated by L indicates the LAG ports. The sub-list indicated by the shelf/slot pair contains entries f…
PvxY1731MepDefects	BITS{ remoteMepDefectCondition (0), lossOfContinuity (1), unexpectedPeriod (2), unexpectedMep (3), misMerge (4), unexpectedMegLevel (5), localLinkFailure (6), internalHWFailure (7), internalSWFailure (8), aisCondition (9), lckCondition (10) }	current	A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects conditions are: remoteMepDefectCondition (1) The MEP has encountered remote MEP defect condition. loss…

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

PACKET-VX-BRIDGE-MIB