PACKETFRONT-DRG-MIB
100 objects
The MIB module for managing Packetfront DRG devices
Imported Objects
| PACKETFRONT-SMI | pfMgmt |
| PACKETFRONT-TC | PortList |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9303.4.3 | IdentitypfDrgMib | The MIB module for managing Packetfront DRG devices | ||
| 1.3.6.1.4.1.9303.4.3.0 | NodedrgNotification | |||
| 1.3.6.1.4.1.9303.4.3.0.1 | NotificationnotifyRestart | current | After booting the system sends this notification repeatedly with an increasing time delay until a valid management station reads or writes an object. | |
| 1.3.6.1.4.1.9303.4.3.0.2 | NotificationnotifyDownloadResult | current | When the device has downloaded a new firmware image or configuration file, the device sends this notification to inform the management system of the result. | |
| 1.3.6.1.4.1.9303.4.3.0.3 | NotificationnotifyConfigSaveResult | current | When a save event occurs, the device sends this notification to inform the management system of the result. | |
| 1.3.6.1.4.1.9303.4.3.1 | NodedrgConfig | |||
| 1.3.6.1.4.1.9303.4.3.1.1 | NodeproductInfo | |||
| 1.3.6.1.4.1.9303.4.3.1.1.1 | ScalarproductName | read-only | current | The name of the product. |
| 1.3.6.1.4.1.9303.4.3.1.1.2 | ScalarproductSerialNo | read-only | current | The unique serial number programmed into the device in the factory. |
| 1.3.6.1.4.1.9303.4.3.1.1.3 | ScalarproductProductionWeek | read-only | current | The week and year in which this device was manufactured. |
| 1.3.6.1.4.1.9303.4.3.1.1.4 | ScalarproductSwImageRev | read-only | current | The revision of the software in the device. This may be upgraded. E.g DMA0081-R2K123. |
| 1.3.6.1.4.1.9303.4.3.1.1.5 | ScalarproductFwImageRev | read-only | current | The revision of the firmware in the device. This describes the bootloader revision, e.g. cxc_132_4098-R3A18. |
| 1.3.6.1.4.1.9303.4.3.1.1.6 | ScalarproductDefaultRevision | read-only | current | The revision of the default configuration in the device. This describes the revision of information loaded during manufacture. |
| 1.3.6.1.4.1.9303.4.3.1.1.7 | ScalarproductOpDefRev | read-only | current | The revision of the operator default information (the .ini file). The syntax is operator specific.Operator default revision ( INI file ). |
| 1.3.6.1.4.1.9303.4.3.1.1.8 | ScalarproductHardwareRev | read-only | current | Manufacturing hardware information regarding the revision of the hardware. |
| 1.3.6.1.4.1.9303.4.3.1.1.9 | ScalarproductPlatform | read-only | current | This provides a predefined string for each product family - this differs from productName in that this cannot be configured by the operator, therefore will be … |
| 1.3.6.1.4.1.9303.4.3.1.1.10 | ScalarproductHardwarePCBARevision | read-only | current | PCBA revision - this is a coded value read from the PCBA hardware. |
| 1.3.6.1.4.1.9303.4.3.1.1.11 | ScalarproductFunctionIdentity | read-only | current | Describes the functionality offered by the device. |
| 1.3.6.1.4.1.9303.4.3.1.1.12 | ScalarproductMacAddress | read-only | current | The device MAC address - this is used in various alert messages to uniquely identify the specific device. The MAC address used is the MAC of the management ent… |
| 1.3.6.1.4.1.9303.4.3.1.1.13 | ScalarproductIdentity | read-only | current | This object provides a unique identity for the device. By default this will be the same as the productMacAddress, however, if a hostname has been defined or pr… |
| 1.3.6.1.4.1.9303.4.3.1.2 | NodesystemConfig | |||
| 1.3.6.1.4.1.9303.4.3.1.2.1 | ScalarsystemConfigRestartControl | read-write | current | Setting this object to restartNow(2) causes the device to reboot immediately. Note that this will cause any unsave configuration changes to be lost, therefore … |
| 1.3.6.1.4.1.9303.4.3.1.2.2 | ScalarsystemConfigRestartControlNotify | read-write | current | This object controls the operation of the notifyRestart alert. The notifyRestart is sent repeatedly when the object is equal to notifying(2). The notifyRestart… |
| 1.3.6.1.4.1.9303.4.3.1.2.3 | ScalarsystemConfigSave | read-write | current | Setting the object to save(1) causes the running configuration to be saved. The object responds with changed(2) if the running configuration differs from the i… |
| 1.3.6.1.4.1.9303.4.3.1.2.4 | ScalarsystemConfigFactoryReset | read-write | current | Setting this object to factoryReset(2) causes the device to return to its factory default settings, and reboot. This means that any operator or user configurat… |
| 1.3.6.1.4.1.9303.4.3.1.2.5 | ScalarsystemConfigSaveNotify | read-write | current | Setting this object to always(2) will cause the device to send a notifyConfigSaveResult alert each time the configuration is saved. Setting this object to only… |
| 1.3.6.1.4.1.9303.4.3.1.3 | NodedownloadConfig | |||
| 1.3.6.1.4.1.9303.4.3.1.3.1 | ScalardownloadServer | read-write | current | The address of the server that contains the file to be loaded. This may take the form of an IP address or FQDN. |
| 1.3.6.1.4.1.9303.4.3.1.3.2 | ScalardownloadFile | read-write | current | The file name to be downloaded from the download server or a URL to be downloaded via http. This value is set to the zero length string when no file name has b… |
| 1.3.6.1.4.1.9303.4.3.1.3.3 | ScalardownloadAction | read-write | current | When this object is set to startDownload(2), the system will attempt to connect to the server specified in downloadServer (or the host part of downloadFile if … |
| 1.3.6.1.4.1.9303.4.3.1.3.4 | ScalardownloadMethod | read-write | current | Defines the method to be used for the file download. This may be a specific protocol, or auto(3) which will cycle through the available methods to find one whi… |
| 1.3.6.1.4.1.9303.4.3.1.3.5 | ScalardownloadRetryCount | read-write | current | Controls the number of attempts which will be made to perform a download before terminating the download attempt. |
| 1.3.6.1.4.1.9303.4.3.1.3.6 | ScalardownloadResultCode | read-only | current | This object returns the status of the last download procedure. If no downloads have occurred, none(0) is returned, or if there is currently a download in progr… |
| 1.3.6.1.4.1.9303.4.3.1.3.7 | ScalardownloadResultNotify | read-write | current | Setting the object to always(2) cause the system to send downloadResultCodeTrap after every download no matter the result. Setting the object to onlyErrors(3) … |
| 1.3.6.1.4.1.9303.4.3.1.4 | NodehostConfig | |||
| 1.3.6.1.4.1.9303.4.3.1.4.1 | ScalarhostIfMax | read-only | current | The maximum numbers of entries (and layer 3 interfaces) in the hostIfTable. |
| 1.3.6.1.4.1.9303.4.3.1.4.2 | ScalarhostIfDefined | read-only | current | The current number of defined host interfaces, i.e. the number of entries in the hostIfTable. |
| 1.3.6.1.4.1.9303.4.3.1.4.3 | TablehostIfTable | not-accessible | current | A table holding a list of interfaces. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1 | RowhostIfEntry | not-accessible | current | One row of the table. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.1 | ColumnhostIfIndex | read-only | current | A unique index for this IP interface entry. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.2 | ColumnhostIfMode | read-write | current | The operational mode of the interface, e.g. DHCP, PPPoE. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.3 | ColumnhostIfHostName | read-write | current | The name of the host interface. If the DHCP client is enabled this object reports the host name from the DHCP negotiation. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.4 | ColumnhostIfAddress | read-create | current | The IP address for this interface entry. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.5 | ColumnhostIfSubnetMask | read-write | current | The subnet mask for this interface entry. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.6 | ColumnhostIfDefaultRouter | read-write | current | The default router for this interface entry. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.7 | ColumnhostIfDomainName | read-write | current | The name of the domain name. If the DHCP client is enabled this object reports the domain name from the DHCP negotiation. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.8 | ColumnhostIfDnsServer1 | read-write | current | The primary DNS server for this interface entry. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.9 | ColumnhostIfDnsServer2 | read-write | current | The secondary DNS server for this interface entry. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.10 | ColumnhostIfDhcpClientID | read-write | current | Setting this object causes the system to use a proprietary client identifier to identify itself to the DHCP server. By default the productMacAddress value of t… |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.11 | ColumnhostIfDhcpVendorClassID | read-write | current | Setting this object causes the system to use the defined value as the DHCP vendor identifier in communication with the DHCP server. By default the value used i… |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.12 | ColumnhostIfDiffservCodePoint | read-write | current | Defines the IP DSCP value used by default for this interface. |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.13 | ColumnhostIfVlan | read-write | current | Values 1..4094 define the default IEEE802.1Q VLAN tag used by this interface. By convention, this is used as the management VLAN when VLANs are enabled on this… |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.14 | ColumnhostIfVlanPriority | read-write | current | Defines the default IEEE802.1p priority tag used by this interface. By convention, this is used as the management priority when VLANs are enabled on this inter… |
| 1.3.6.1.4.1.9303.4.3.1.4.3.1.15 | ColumnhostIfSecurePing | read-write | current | Setting this object to enabled(1) causes the device to silently drop ICMP echo (ping) requests. This is a simple way to cloak the presence of a device from pin… |
| 1.3.6.1.4.1.9303.4.3.1.7 | NodesnmpConfig | |||
| 1.3.6.1.4.1.9303.4.3.1.7.1 | ScalarsnmpTrapDestHostsMax | read-only | current | The maximum number of trap hosts which may be defined |
| 1.3.6.1.4.1.9303.4.3.1.7.2 | ScalarsnmpTrapDestHostsDefined | read-only | current | Current number of configured trap destinations. |
| 1.3.6.1.4.1.9303.4.3.1.7.3 | TablesnmpTrapDestinationTable | not-accessible | current | A table of transport addresses to be used in the generation of SNMP messages. |
| 1.3.6.1.4.1.9303.4.3.1.7.3.1 | RowsnmpTrapDestinationEntry | not-accessible | current | A transport address to be used in the generation of SNMP operations. Entries in the trapDestinationTable are created and deleted using the snmpTrapDestRowStatu… |
| 1.3.6.1.4.1.9303.4.3.1.7.3.1.1 | ColumnsnmpTrapDestIndex | read-create | current | The locally arbitrary, but unique identifier associated with this trapDestinationEntry. |
| 1.3.6.1.4.1.9303.4.3.1.7.3.1.2 | ColumnsnmpTrapDestName | read-create | current | This object contains a human readable name for the trap destination. |
| 1.3.6.1.4.1.9303.4.3.1.7.3.1.3 | ColumnsnmpTrapDestAddress | read-create | current | This object contains the address of the trap destination. |
| 1.3.6.1.4.1.9303.4.3.1.7.3.1.4 | ColumnsnmpTrapDestTagList | read-create | current | This object contains a list of tag values which are used to select target addresses for a particular operation. |
| 1.3.6.1.4.1.9303.4.3.1.7.3.1.5 | ColumnsnmpTrapDestRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.9303.4.3.1.7.4 | ScalarsnmpReadCommunityName | read-write | current | The read community string for the device. |
| 1.3.6.1.4.1.9303.4.3.1.7.5 | ScalarsnmpWriteCommunityName | read-write | current | The write community string for the device. |
| 1.3.6.1.4.1.9303.4.3.1.7.6 | ScalarsnmpTrapCommunityName | read-write | current | The notification community string for the device. |
| 1.3.6.1.4.1.9303.4.3.1.7.7 | ScalarsnmpDiffservCodePoint | read-write | current | Defines the IP DSCP value used by the SNMP agent. |
| 1.3.6.1.4.1.9303.4.3.1.7.8 | ScalarsnmpAtomicSet | read-write | current | Complex operations involving numerous set commands can cause problems due to the lack of atomic operation by the network management system. This object may be … |
| 1.3.6.1.4.1.9303.4.3.1.8 | NodevlanConfig | |||
| 1.3.6.1.4.1.9303.4.3.1.8.1 | NodevlanBase | |||
| 1.3.6.1.4.1.9303.4.3.1.8.1.1 | ScalarvlanVersionNumber | read-only | current | The version number of IEEE802.1Q that this device supports. |
| 1.3.6.1.4.1.9303.4.3.1.8.1.2 | ScalarvlanMaxVlanId | read-only | current | The maximum IEEE802.1Q VLAN ID that this device supports. |
| 1.3.6.1.4.1.9303.4.3.1.8.1.3 | ScalarvlanMaxSupportedVlans | read-only | current | The maximum number of IEEE802.1Q VLANs that this device supports. |
| 1.3.6.1.4.1.9303.4.3.1.8.1.4 | ScalarvlanNumVlans | read-only | current | The current number of IEEE802.1Q VLANs that are configured in this device. |
| 1.3.6.1.4.1.9303.4.3.1.8.2 | NodevlanTp | |||
| 1.3.6.1.4.1.9303.4.3.1.8.2.1 | TablevlanFdbTable | not-accessible | current | A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automa… |
| 1.3.6.1.4.1.9303.4.3.1.8.2.1.1 | RowvlanFdbEntry | not-accessible | current | Information about a specific Filtering Database. |
| 1.3.6.1.4.1.9303.4.3.1.8.2.1.1.1 | ColumnvlanFdbId | not-accessible | current | The identity of this Filtering Database. |
| 1.3.6.1.4.1.9303.4.3.1.8.2.1.1.2 | ColumnvlanFdbDynamicCount | read-only | current | The current number of dynamic entries in this Filtering Database. |
| 1.3.6.1.4.1.9303.4.3.1.8.2.2 | TablevlanTpFdbTable | not-accessible | current | A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.9303.4.3.1.8.2.2.1 | RowvlanTpFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.9303.4.3.1.8.2.2.1.1 | ColumnvlanTpFdbAddress | not-accessible | current | A unicast MAC address for which the device has forwarding and/or filtering information. |
| 1.3.6.1.4.1.9303.4.3.1.8.2.2.1.2 | ColumnvlanTpFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of vlanTpFdbAddr… |
| 1.3.6.1.4.1.9303.4.3.1.8.2.2.1.3 | ColumnvlanTpFdbStatus | read-only | current | The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corr… |
| 1.3.6.1.4.1.9303.4.3.1.8.3 | NodevlanStatic | |||
| 1.3.6.1.4.1.9303.4.3.1.8.3.1 | TablevlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured on the device. All entries are permanent and will be restored after the device is … |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1 | RowvlanStaticEntry | not-accessible | current | Static information for a VLAN configured in the device. |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.1 | ColumnvlanStaticIndex | read-create | current | The locally arbitrary, but unique identifier associated with this vlanStaticEntry. |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.2 | ColumnvlanStaticName | read-write | current | An administratively assigned string, which may be used to identify the VLAN |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.3 | ColumnvlanStaticVlanId | read-write | current | The VLAN identifier associated with this VLAN entry |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.4 | ColumnvlanStaticPriority | read-write | current | The IEEE802.1p priority value associated with this VLAN entry - this information may be used for policing priority where supported |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.5 | ColumnvlanStaticEgressPorts | read-write | current | The set of ports which are permanently assigned to the egress list for this VLAN by management. The default value of this object is a string of zeros of approp… |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.6 | ColumnvlanStaticUntaggedPorts | read-write | current | Describes the set of ports which should transmit egress packets for this VLAN untagged. If a device agent cannot support the set of ports being set then it wil… |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.7 | ColumnvlanStaticUnmodifiedPorts | read-write | current | Describes the set of ports which should transmit egress packets for this VLAN unmodified. If a device agent cannot support the set of ports being set then it w… |
| 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.8 | ColumnvlanStaticRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.9303.4.3.2 | NodedrgConformance | |||
| 1.3.6.1.4.1.9303.4.3.2.1 | NodedrgGroups | |||
| 1.3.6.1.4.1.9303.4.3.2.2 | NodedrgCompliance | |||
| 1.3.6.1.4.1.9303.4.3.2.3 | NodedrgCompatibility |