PACKETPORT-MIB
111 objects
This is the portion of the Arris enterprise MIB that applies to the Packetport.
Imported Objects
| ARRIS-MIB | arris |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.10 | IdentitypacketPortMib | of | of | This is the portion of the Arris enterprise MIB that applies to the Packetport. |
| 1.3.6.1.4.1.4115.10.1 | NodeppConfiguration | |||
| 1.3.6.1.4.1.4115.10.1.1 | TableppCfgPortTable | not-accessible | current | This table is used to define the configurable data on a per port basis. |
| 1.3.6.1.4.1.4115.10.1.1.1 | RowppCfgPortEntry | not-accessible | current | An entry in the Configuration Port table. |
| 1.3.6.1.4.1.4115.10.1.1.1.1 | ColumnppCfgPortPortNumber | not-accessible | current | The unique value which identifies the port. |
| 1.3.6.1.4.1.4115.10.1.1.1.2 | ColumnppCfgPortAdminState | read-only | current | The administrative state of the line. |
| 1.3.6.1.4.1.4115.10.1.1.1.3 | ColumnppCfgPortCallAgentName | read-only | current | Call agent domain name. |
| 1.3.6.1.4.1.4115.10.1.1.1.4 | ColumnppCfgPortCallAgentIpAddress | read-only | obsolete | Call Agent IP address. |
| 1.3.6.1.4.1.4115.10.1.1.1.5 | ColumnppCfgPortProvSignalingProt | read-only | obsolete | The provisioned signaling protocol on the port. |
| 1.3.6.1.4.1.4115.10.1.1.1.6 | ColumnppCfgPortLoopCurrent | read-write | current | This object provides the ability to set the loop current high or low. |
| 1.3.6.1.4.1.4115.10.1.1.1.7 | ColumnppCfgPortTpar | read-only | obsolete | This object contains the maximum value of partial dial timeout in seconds. |
| 1.3.6.1.4.1.4115.10.1.1.1.8 | ColumnppCfgPortTcrit | read-only | obsolete | This object contains the maximum value of critical dial timeout in seconds. |
| 1.3.6.1.4.1.4115.10.1.1.1.9 | ColumnppCfgPortBusyToneTimeOut | read-only | obsolete | Busy tone time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.10 | ColumnppCfgPortDialToneTimeOut | read-only | obsolete | Dial tone time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.11 | ColumnppCfgPortMsgWaitTimeOut | read-only | obsolete | Message waiting time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.12 | ColumnppCfgPortOffHookWarnTimeOut | read-only | obsolete | Off hook warning time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.13 | ColumnppCfgPortRingingTimeOut | read-only | obsolete | Ringing time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.14 | ColumnppCfgPortRingBackTimeOut | read-only | obsolete | RingBack time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.15 | ColumnppCfgPortReorderTimeOut | read-only | obsolete | Reorder time out value. |
| 1.3.6.1.4.1.4115.10.1.1.1.16 | ColumnppCfgPortStutterDialToneTimeOut | read-only | obsolete | Stutter dial tone time out value |
| 1.3.6.1.4.1.4115.10.1.1.1.17 | ColumnppCfgPortMaxWaitDelay | read-only | obsolete | This object contains the maximum number of seconds a MTA waits after a restart. |
| 1.3.6.1.4.1.4115.10.1.1.1.18 | ColumnppCfgPortCallAgentUdpPort | read-only | current | This object contains the call agent udp port that is being used for this instance of call signaling. |
| 1.3.6.1.4.1.4115.10.1.1.1.19 | ColumnppCfgPortTxGainControl | read-write | current | The gain control setting (dB) in the upstream, or A-to-D, direction. Setting this value for either line will take affect on ALL telephony lines. |
| 1.3.6.1.4.1.4115.10.1.1.1.20 | ColumnppCfgPortRxGainControl | read-write | current | The gain control setting (dB) in the downstream, or D-to-A, direction. Setting this value for either line will take affect on ALL telephony lines. |
| 1.3.6.1.4.1.4115.10.1.1.1.21 | ColumnppCfgPortLocUserIndication | read-write | current | Treatement/Tone applied in loss of communication (LOC) scenarios. |
| 1.3.6.1.4.1.4115.10.1.1.1.22 | ColumnppCfgPortPacketizationPeriod | read-only | obsolete | The per line packetization period for codec type. |
| 1.3.6.1.4.1.4115.10.1.1.1.23 | ColumnppCfgPortCodec | read-only | obsolete | The per line codec type gxxxx. |
| 1.3.6.1.4.1.4115.10.1.1.1.24 | ColumnppCfgPortDialingMethod | read-write | deprecated | Indicates the method used to dial the digits for this telephony endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2), dial-pulse signaling is used to… |
| 1.3.6.1.4.1.4115.10.1.1.1.25 | ColumnppCfgPortT38MaxDatagram | read-write | current | Specifies the T38 Max Datagram size for incoming T38 packets. If this is used to allow larger incoming T38 packets then the Call Agent must allocate more bandw… |
| 1.3.6.1.4.1.4115.10.1.2 | ScalarppCfgMtaAdminState | read-only | current | The administrative state of the packetport. |
| 1.3.6.1.4.1.4115.10.1.3 | ScalarppCfgMtaTeleSyslogServIpAddr | read-write | current | The MTA's telephony syslog server IP address. |
| 1.3.6.1.4.1.4115.10.1.4 | ScalarppCfgMtaTeleSyslogServName | read-write | current | The MTA's telephony syslog server domain name. |
| 1.3.6.1.4.1.4115.10.1.5 | ScalarppCfgMtaTeleFullyQualName | read-only | obsolete | MTA fully qualified domain name. |
| 1.3.6.1.4.1.4115.10.1.6 | ScalarppCfgMtaTeleServProvServIpAddr | read-only | obsolete | The telephony service provider provisioning server IP address. This object returns 0.0.0.0 if the provisioning server IP address is unknown or unassigned. |
| 1.3.6.1.4.1.4115.10.1.7 | ScalarppCfgMtaTeleServProvServName | read-only | obsolete | The telephony service provider provisioning server domain name. This object returns a (zero-length) string if the provisioning server domain name is unknown or… |
| 1.3.6.1.4.1.4115.10.1.8 | ScalarppCfgMtaTeleServProvDhcpIpAddr | read-only | obsolete | The telephony service provider DHCP IP address. |
| 1.3.6.1.4.1.4115.10.1.9 | ScalarppCfgMtaTeleServProvDhcpName | read-only | obsolete | The telephony service provider DHCP domain name. |
| 1.3.6.1.4.1.4115.10.1.10 | ScalarppCfgMtaPrimTeleNetDnsAddr | read-only | obsolete | Primary telephony provisioning DNS address. |
| 1.3.6.1.4.1.4115.10.1.11 | ScalarppCfgMtaSecTeleNetDnsAddr | read-only | obsolete | Secondary telephony provisioning DNS address. |
| 1.3.6.1.4.1.4115.10.1.12 | ScalarppCfgMtaCableTvEnable | read-write | current | This object provides the ability to turn the cable off and on. |
| 1.3.6.1.4.1.4115.10.1.13 | ScalarppCfgMtaConfigFileAccName | read-only | obsolete | The filename of the config file. |
| 1.3.6.1.4.1.4115.10.1.14 | ScalarppCfgMtaCountryTemplate | read-write | current | The country code template. |
| 1.3.6.1.4.1.4115.10.1.15 | ScalarppCfgMtaProvMethodIndicator | read-only | obsolete | The telephony provisioning method indicator. |
| 1.3.6.1.4.1.4115.10.1.16 | ScalarppCfgMtaTeleConfigServerIpAddr | read-only | obsolete | The telephony configuration server IP address, in our case the telephony TFTP server. |
| 1.3.6.1.4.1.4115.10.1.17 | ScalarppCfgMtaTeleConfigServerName | read-only | obsolete | The telephony configuration server DN, in our case the telephony TFTP server. |
| 1.3.6.1.4.1.4115.10.1.18 | ScalarppCfgMtaNcsCallSigTos | read-only | obsolete | The default value used in the IP header for setting the TOS value for NCS call signalling. |
| 1.3.6.1.4.1.4115.10.1.19 | ScalarppCfgMtaDataInterface | read-write | current | The data interface type. |
| 1.3.6.1.4.1.4115.10.1.20 | ScalarppCfgMtaCallpFeatureSwitch | read-write | current | Callp Feature Switch activates certain functionality and compliancies in callp. WARNING: Changes can result into loss of communication to the Callagent or loss… |
| 1.3.6.1.4.1.4115.10.1.21 | ScalarppCfgMtaCallServerType | read-only | obsolete | Call Server Type that packeport is interfacing to. |
| 1.3.6.1.4.1.4115.10.1.22 | ScalarppCfgMtaInternetIsolationState | read-only | obsolete | This object provides the ability to turn the Internet isolation off, on and auto |
| 1.3.6.1.4.1.4115.10.1.23 | ScalarppCfgRfc2833DigitPayloadType | read-write | current | This object is used to define the payload type used for 2833 digit events when enabled via setting the bit in the Callp Feature Switch. |
| 1.3.6.1.4.1.4115.10.1.24 | ScalarppCfgMtaFeatureSwitch | read-write | current | MTA Feature Switch activates certain functionality and compliancies in the MTA. hashBypass(1): Disable cfg file Hash checking during provisioning sequence. max… |
| 1.3.6.1.4.1.4115.10.1.25 | ScalarppCfgMtaBatteryReplaceReporting | read-write | current | Determines how the REPLACE BATTERY condition for a TM02DG102 Hardware rev. 6 is reported. Choices are: - Same criteria as for all other battery units (value ==… |
| 1.3.6.1.4.1.4115.10.1.26 | ScalarppCfgNsePayloadType | read-write | current | This object is used to define the payload type used for NSE messages when enabled via setting the bit in the Callp Feature Switch. |
| 1.3.6.1.4.1.4115.10.1.27 | ScalarppCfgMtaCallpFeatureSwitch2 | read-write | current | This object is like ppCfgMtaCallpFeatureSwitch. It is used to activates certain functionality and compliancies in callp. 0x00000001 // Treat osi signal as bz s… |
| 1.3.6.1.4.1.4115.10.1.29 | NodeppCfgMtaDevSecurity | |||
| 1.3.6.1.4.1.4115.10.1.29.1 | NodeppCfgMtaDevServiceProviderTestRootCert | |||
| 1.3.6.1.4.1.4115.10.1.29.1.1 | ScalarppCfgMtaDevSPTestRootCertServer | read-write | current | The IP address of the TFTP server used for downloading Service Provider Test Root Certificates to this device. Returns 0.0.0.0 if the TFTP server address is un… |
| 1.3.6.1.4.1.4115.10.1.29.1.2 | ScalarppCfgMtaDevSPTestRootCertFilename | read-write | current | The file name of the Service Provider Test Root Certificate to be downloaded to this device from the TFTP server. Returns an empty string if the certificate fi… |
| 1.3.6.1.4.1.4115.10.1.29.1.3 | ScalarppCfgMtaDevSPTestRootCertAdminStatus | read-write | current | Controls the usage of Root Certificates by the MTA device. If set to downloadTestRootCert(2), the MTA will download the Service Provider Test Root Certificate … |
| 1.3.6.1.4.1.4115.10.1.29.1.4 | ScalarppCfgMtaDevSPTestRootCertDownloadState | read-only | current | This object indicates the current state of the Service Provider Test Root Certificate download process. noDownload(0) indicates that no certificate download ha… |
| 1.3.6.1.4.1.4115.10.1.30 | NodeppCfgDevHttp | |||
| 1.3.6.1.4.1.4115.10.1.30.1 | ScalarppCfgMtaLanHttpAccess | read-write | deprecated | Controls the level of LAN-side HTTP access to the modem. The levels are described as: off(1) - LAN-side access is denied, basic(2) - DOCSIS-only access, advanc… |
| 1.3.6.1.4.1.4115.10.1.30.2 | ScalarppCfgMtaWanHttpAccess | read-write | deprecated | Controls the level of WAN-side HTTP access to the modem. The levels are described as: off(1) - WAN-side access is denied, basic(2) - DOCSIS-only access, advanc… |
| 1.3.6.1.4.1.4115.10.1.30.3 | ScalarppCfgMtaClientSeed | read-write | obsolete | The current client provided seed that will be used to generate the HTTP WEB Access Advanced Pages password. **NOTE: this object has been replaced by 'arrisCmDe… |
| 1.3.6.1.4.1.4115.10.1.30.4 | ScalarppCfgMtaHTTPAdvLink | read-write | obsolete | This object provides the ability to show or hide the ADV link on the Basic Page of the HTTP Web Page. **NOTE: this object is obsolete. |
| 1.3.6.1.4.1.4115.10.2 | NodeppSurveillance | |||
| 1.3.6.1.4.1.4115.10.2.1 | TableppSurvPortTable | not-accessible | current | This table is used to define the surveillance data on a per port basis. |
| 1.3.6.1.4.1.4115.10.2.1.1 | RowppSurvPortEntry | not-accessible | current | An entry in the Configuration Port table. |
| 1.3.6.1.4.1.4115.10.2.1.1.1 | ColumnppSurvPortNumber | not-accessible | current | The unique value which identifies the port. |
| 1.3.6.1.4.1.4115.10.2.1.1.2 | ColumnppSurvPortMaintState | read-only | current | The maintenance state of the line. |
| 1.3.6.1.4.1.4115.10.2.1.1.3 | ColumnppSurvPortDigitMap | read-only | obsolete | The digit map set by the call agent. |
| 1.3.6.1.4.1.4115.10.2.1.1.4 | ColumnppSurvPortLcDiagRequest | read-write | current | Setting this value to true will send a diagnostics request on the line. Reading this value will always return false. The maintenance state of the line indicate… |
| 1.3.6.1.4.1.4115.10.2.1.1.5 | ColumnppSurvPortDeprovRequest | read-write | current | Setting this value to true will send a deprovisioning request on the line. Reading this value will always return false. The maintenance state of the line will … |
| 1.3.6.1.4.1.4115.10.2.1.1.6 | ColumnppSurvPortLcDiagLastResult | read-only | current | The last result of diags for this line. If diagnostics are in progress it will return results pending. |
| 1.3.6.1.4.1.4115.10.2.2 | TableppSurvMtaCodecCapTable | not-accessible | obsolete | This table describes the codec capabilities of the Packetport. |
| 1.3.6.1.4.1.4115.10.2.2.1 | RowppSurvMtaCodecCapEntry | not-accessible | obsolete | An entry in the MTA codec capabilities table. |
| 1.3.6.1.4.1.4115.10.2.2.1.1 | ColumnppSurvMtaCodecCapIndex | not-accessible | obsolete | The index for this table. |
| 1.3.6.1.4.1.4115.10.2.2.1.2 | ColumnppSurvMtaCodecCapType | read-only | obsolete | A codec type supported by this device. |
| 1.3.6.1.4.1.4115.10.2.3 | TableppSurvMtaSigCapTable | not-accessible | obsolete | A table of the signaling capabilities of the Packetport. |
| 1.3.6.1.4.1.4115.10.2.3.1 | RowppSurvMtaSigCapEntry | not-accessible | obsolete | An entry in the signaling capabilities table. |
| 1.3.6.1.4.1.4115.10.2.3.1.1 | ColumnppSurvMtaSigCapIndex | not-accessible | obsolete | The index for this table. |
| 1.3.6.1.4.1.4115.10.2.3.1.2 | ColumnppSurvMtaSigCapProtocol | read-only | obsolete | A signaling protocol this device supports. |
| 1.3.6.1.4.1.4115.10.2.4 | ScalarppSurvMtaNumberPorts | read-only | current | The number of RJ11s. |
| 1.3.6.1.4.1.4115.10.2.5 | ScalarppSurvMtaActiveSwBank | read-only | obsolete | The active sw bank. |
| 1.3.6.1.4.1.4115.10.2.6 | ScalarppSurvMtaPowerSupplyTele | read-only | current | The battery telemetry state. |
| 1.3.6.1.4.1.4115.10.2.7 | ScalarppSurvMtaSoftwareLoadBankA | read-only | obsolete | The current software load in bank A. |
| 1.3.6.1.4.1.4115.10.2.8 | ScalarppSurvMtaSoftwareLoadBankB | read-only | obsolete | The current software load in bank B. |
| 1.3.6.1.4.1.4115.10.2.9 | ScalarppSurvMtaPeccode | read-only | obsolete | The peccode of the PacketPort. |
| 1.3.6.1.4.1.4115.10.2.10 | ScalarppSurvMtaMaintState | read-only | current | The maintenance state of the PacketPort. |
| 1.3.6.1.4.1.4115.10.2.11 | ScalarppSurvMtaDeviceIdentifier | read-only | current | The device identifier string that is sent in the DHCP offer. |
| 1.3.6.1.4.1.4115.10.2.12 | ScalarppSurvMtaInitialProvAck | read-only | obsolete | The acknowledgement object for the initial provisioning trap ppInitialProvTrap. |
| 1.3.6.1.4.1.4115.10.2.13 | ScalarppSurvMtaCurrSwFilename | read-only | current | The filename of the software load currently on the device. This is temporary until the cable modem is DOCSIS 1.1 compliant. |
| 1.3.6.1.4.1.4115.10.2.14 | ScalarppSurvMtaProvStatusAck | read-only | obsolete | The acknowledgement object for the provisioning status trap. |
| 1.3.6.1.4.1.4115.10.2.15 | ScalarppSurvMtaProvState | read-only | obsolete | This object indicates the completion state of the telephony provisioning process. Pass or Fail states occur after the processing of the telephony configuration… |
| 1.3.6.1.4.1.4115.10.2.16 | ScalarppSurvMtaDevCorrelationId | read-only | obsolete | Unique value used to correlate provisioning status trap to initial provisioning trap. |
| 1.3.6.1.4.1.4115.10.2.17 | ScalarppSurvMtaBoxIdentifier | read-only | current | Identifies the overall Rev level of the PacketPort. This includes all hardware components that make up the box. |
| 1.3.6.1.4.1.4115.10.2.18 | NodeppSurvMtaDevDebug | |||
| 1.3.6.1.4.1.4115.10.2.18.1 | TableppSurvMtaDevDebugLevelControlTable | not-accessible | current | This table allows control of the reporting of debug messages in the PacketPort device. For each system module (i.e. subsystem) of the device, a specific report… |
| 1.3.6.1.4.1.4115.10.2.18.1.1 | RowppSurvMtaDevDebugLevelControlEntry | not-accessible | current | Allows configuration of the reporting of debug messages for a particular system module in the PacketPort device. |
| 1.3.6.1.4.1.4115.10.2.18.1.1.1 | ColumnppSurvMtaDevDebugModule | not-accessible | current | The system module to which this entry applies. |
| 1.3.6.1.4.1.4115.10.2.18.1.1.2 | ColumnppSurvMtaDevDebugReportingLevel | read-write | current | Controls the level of debugging output for a particular system module. |
| 1.3.6.1.4.1.4115.10.2.19 | NodeppSurvMtaDevAlarms | |||
| 1.3.6.1.4.1.4115.10.2.19.1 | ScalarppSurvMtaDevAlarmRetryTimer | read-write | current | The amount of time to wait before resending an unACKnowledged alarm. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CodecType | INTEGER{ g711u(1), g711a(2), g7231(3), g729(4), g729a(5), g729e(6), g726(7), g728(8) } | obsolete | These are the various types of codecs that may be supported. |
| CountryCode | INTEGER{ northAmerica57(1), chile(2), japan (3), australia(4), austria(5), france(6), germany(7), ireland(8), netherlands(9), portugal(10), spain(11), belgium(12), poland(13), israel(14), czechRepublic(15), brazil(16), northAmerica33(17), northAmerica09(18), netherlands09(19), japan600(20), hungary(21), sweden(22), norway(23), slovakia(24), japan600L412(25), mexico(26), panama(27), mexicoC(28), swiss(29), poland1010(30), germany2(31), northAmerica66(32), argentina(33), slovenia(34), chileT(35), unitedKingdom(36), romania(37) } | current | These are the countries for the country code template object. |
| DocsX509ASN1DEREncodedCertificate | OCTET STRING (SIZE (0..4096)) | current | An X509 digital certificate encoded as an ASN.1 DER object. |
| PacketizationPeriodType | INTEGER{ ten(10), twenty(20), thirty(30) } | obsolete | The packetization periods supported by the PacketPort. |
| PpCallServerType | INTEGER { standard(0), sn03(1), tropico(2), tb200gr303(3), tb200v52(4), clarent(5), pktcable(6) } | obsolete | These are the various call servers that are supported. |
| PpDebugReportingLevel | INTEGER { off(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7), level8(8), level9(9), level10(10) } | current | These are the debug message reporting levels that are supported. |
| SignalingProtocol | INTEGER{ none(0), ncs(1)} | obsolete | These are the various signaling protocols that may be supported. |