PBN-MIB
536 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress Opaque |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11606 | Nodepbn | |||
| 1.3.6.1.4.1.11606.0 | NodepbnTrap | |||
| 1.3.6.1.4.1.11606.0.15 | Nodemodule15 | PBN Module 1 Param 5 Alarm notification | ||
| 1.3.6.1.4.1.11606.0.16 | Nodemodule16 | PBN Module 1 Param 6 Alarm notification | ||
| 1.3.6.1.4.1.11606.0.17 | Nodemodule17 | PBN Module 1 Param 7 Alarm notification | ||
| 1.3.6.1.4.1.11606.0.18 | Nodemodule18 | PBN Module 1 Param 8 Alarm notification | ||
| 1.3.6.1.4.1.11606.0.19 | Nodemodule19 | PBN Module 1 Param 9 notification | ||
| 1.3.6.1.4.1.11606.0.25 | Nodemodule25 | PBN Module 2 Param 5 notification | ||
| 1.3.6.1.4.1.11606.0.26 | Nodemodule26 | PBN Module 2 Param 6 notification | ||
| 1.3.6.1.4.1.11606.0.27 | Nodemodule27 | PBN Module 2 Param 7 notification | ||
| 1.3.6.1.4.1.11606.0.28 | Nodemodule28 | PBN Module 2 Param 8 notification | ||
| 1.3.6.1.4.1.11606.0.29 | Nodemodule29 | PBN Module 2 Param 9 notification | ||
| 1.3.6.1.4.1.11606.0.35 | Nodemodule35 | PBN Module 3 Param 5 notification | ||
| 1.3.6.1.4.1.11606.0.36 | Nodemodule36 | PBN Module 3 Param 6 notification | ||
| 1.3.6.1.4.1.11606.0.37 | Nodemodule37 | PBN Module 3 Param 7 notification | ||
| 1.3.6.1.4.1.11606.0.38 | Nodemodule38 | PBN Module 3 Param 8 notification | ||
| 1.3.6.1.4.1.11606.0.39 | Nodemodule39 | PBN Module 3 Param 9 notification | ||
| 1.3.6.1.4.1.11606.0.45 | Nodemodule45 | PBN Module 4 Param 5 notification | ||
| 1.3.6.1.4.1.11606.0.46 | Nodemodule46 | PBN Module 4 Param 6 notification | ||
| 1.3.6.1.4.1.11606.0.47 | Nodemodule47 | PBN Module 4 Param 7 notification | ||
| 1.3.6.1.4.1.11606.0.48 | Nodemodule48 | PBN Module 4 Param 8 notification | ||
| 1.3.6.1.4.1.11606.0.49 | Nodemodule49 | PBN Module 4 Param 9 notification | ||
| 1.3.6.1.4.1.11606.0.110 | Nodemodule110 | PBN Module 1 Param 10 notification | ||
| 1.3.6.1.4.1.11606.0.111 | Nodemodule111 | PBN Module 1 Param 11 notification | ||
| 1.3.6.1.4.1.11606.0.112 | Nodemodule112 | PBN Module 1 Param 12 notification | ||
| 1.3.6.1.4.1.11606.0.113 | Nodemodule113 | PBN Module 1 Param 13 notification | ||
| 1.3.6.1.4.1.11606.0.114 | Nodemodule114 | PBN Module 1 Param 14 notification | ||
| 1.3.6.1.4.1.11606.0.115 | Nodemodule115 | PBN Module 1 Param 15 notification | ||
| 1.3.6.1.4.1.11606.0.116 | Nodemodule116 | PBN Module 1 Param 16 notification | ||
| 1.3.6.1.4.1.11606.0.117 | Nodemodule117 | PBN Module 1 Param 17 notification | ||
| 1.3.6.1.4.1.11606.0.118 | Nodemodule118 | PBN Module 1 Param 18 notification | ||
| 1.3.6.1.4.1.11606.0.119 | Nodemodule119 | PBN Module 1 Param 19 notification | ||
| 1.3.6.1.4.1.11606.0.120 | Nodemodule120 | PBN Module 1 Param 20 notification | ||
| 1.3.6.1.4.1.11606.0.121 | Nodemodule121 | PBN Module 1 Param 21 notification | ||
| 1.3.6.1.4.1.11606.0.122 | Nodemodule122 | PBN Module 1 Param 22 notification | ||
| 1.3.6.1.4.1.11606.0.123 | Nodemodule123 | PBN Module 1 Param 23 notification | ||
| 1.3.6.1.4.1.11606.0.124 | Nodemodule124 | PBN Module 1 Param 24 notification | ||
| 1.3.6.1.4.1.11606.0.125 | Nodemodule125 | PBN Module 1 Param 25 notification | ||
| 1.3.6.1.4.1.11606.0.126 | Nodemodule126 | PBN Module 1 Param 26 notification | ||
| 1.3.6.1.4.1.11606.0.127 | Nodemodule127 | PBN Module 1 Param 27 notification | ||
| 1.3.6.1.4.1.11606.0.128 | Nodemodule128 | PBN Module 1 Param 28 notification | ||
| 1.3.6.1.4.1.11606.0.129 | Nodemodule129 | PBN Module 1 Param 29 notification | ||
| 1.3.6.1.4.1.11606.0.130 | Nodemodule130 | PBN Module 1 Param 30 notification | ||
| 1.3.6.1.4.1.11606.0.131 | Nodemodule131 | PBN Module 1 Param 31 notification | ||
| 1.3.6.1.4.1.11606.0.210 | Nodemodule210 | PBN Module 2 Param 10 notification | ||
| 1.3.6.1.4.1.11606.0.211 | Nodemodule211 | PBN Module 2 Param 11 notification | ||
| 1.3.6.1.4.1.11606.0.212 | Nodemodule212 | PBN Module 2 Param 12 notification | ||
| 1.3.6.1.4.1.11606.0.213 | Nodemodule213 | PBN Module 2 Param 13 notification | ||
| 1.3.6.1.4.1.11606.0.214 | Nodemodule214 | PBN Module 2 Param 14 notification | ||
| 1.3.6.1.4.1.11606.0.215 | Nodemodule215 | PBN Module 2 Param 15 notification | ||
| 1.3.6.1.4.1.11606.0.216 | Nodemodule216 | PBN Module 2 Param 16 notification | ||
| 1.3.6.1.4.1.11606.0.217 | Nodemodule217 | PBN Module 2 Param 17 notification | ||
| 1.3.6.1.4.1.11606.0.218 | Nodemodule218 | PBN Module 2 Param 18 notification | ||
| 1.3.6.1.4.1.11606.0.219 | Nodemodule219 | PBN Module 2 Param 19 Alarm notification | ||
| 1.3.6.1.4.1.11606.0.220 | Nodemodule220 | PBN Module 2 Param 20 notification | ||
| 1.3.6.1.4.1.11606.0.221 | Nodemodule221 | PBN Module 2 Param 21 notification | ||
| 1.3.6.1.4.1.11606.0.222 | Nodemodule222 | PBN Module 2 Param 22 notification | ||
| 1.3.6.1.4.1.11606.0.223 | Nodemodule223 | PBN Module 2 Param 23 notification | ||
| 1.3.6.1.4.1.11606.0.224 | Nodemodule224 | PBN Module 2 Param 24 notification | ||
| 1.3.6.1.4.1.11606.0.225 | Nodemodule225 | PBN Module 2 Param 25 notification | ||
| 1.3.6.1.4.1.11606.0.226 | Nodemodule226 | PBN Module 2 Param 26 notification | ||
| 1.3.6.1.4.1.11606.0.227 | Nodemodule227 | PBN Module 2 Param 27 notification | ||
| 1.3.6.1.4.1.11606.0.228 | Nodemodule228 | PBN Module 2 Param 28 notification | ||
| 1.3.6.1.4.1.11606.0.229 | Nodemodule229 | PBN Module 2 Param 29 notification | ||
| 1.3.6.1.4.1.11606.0.230 | Nodemodule230 | PBN Module 2 Param 30 notification | ||
| 1.3.6.1.4.1.11606.0.231 | Nodemodule231 | PBN Module 2 Param 31 notification | ||
| 1.3.6.1.4.1.11606.0.310 | Nodemodule310 | PBN Module 3 Param 10 notification | ||
| 1.3.6.1.4.1.11606.0.311 | Nodemodule311 | PBN Module 3 Param 11 notification | ||
| 1.3.6.1.4.1.11606.0.312 | Nodemodule312 | PBN Module 3 Param 12 notification | ||
| 1.3.6.1.4.1.11606.0.313 | Nodemodule313 | PBN Module 3 Param 13 notification | ||
| 1.3.6.1.4.1.11606.0.314 | Nodemodule314 | PBN Module 3 Param 14 notification | ||
| 1.3.6.1.4.1.11606.0.315 | Nodemodule315 | PBN Module 3 Param 15 notification | ||
| 1.3.6.1.4.1.11606.0.316 | Nodemodule316 | PBN Module 3 Param 16 notification | ||
| 1.3.6.1.4.1.11606.0.317 | Nodemodule317 | PBN Module 3 Param 17 notification | ||
| 1.3.6.1.4.1.11606.0.318 | Nodemodule318 | PBN Module 3 Param 18 notification | ||
| 1.3.6.1.4.1.11606.0.319 | Nodemodule319 | PBN Module 3 Param 19 notification | ||
| 1.3.6.1.4.1.11606.0.320 | Nodemodule320 | PBN Module 3 Param 20 notification | ||
| 1.3.6.1.4.1.11606.0.321 | Nodemodule321 | PBN Module 3 Param 21 notification | ||
| 1.3.6.1.4.1.11606.0.322 | Nodemodule322 | PBN Module 3 Param 22 notification | ||
| 1.3.6.1.4.1.11606.0.323 | Nodemodule323 | PBN Module 3 Param 23 notification | ||
| 1.3.6.1.4.1.11606.0.324 | Nodemodule324 | PBN Module 3 Param 24 notification | ||
| 1.3.6.1.4.1.11606.0.325 | Nodemodule325 | PBN Module 3 Param 25 notification | ||
| 1.3.6.1.4.1.11606.0.326 | Nodemodule326 | PBN Module 3 Param 26 notification | ||
| 1.3.6.1.4.1.11606.0.327 | Nodemodule327 | PBN Module 3 Param 27 notification | ||
| 1.3.6.1.4.1.11606.0.328 | Nodemodule328 | PBN Module 3 Param 28 notification | ||
| 1.3.6.1.4.1.11606.0.329 | Nodemodule329 | PBN Module 3 Param 29 notification | ||
| 1.3.6.1.4.1.11606.0.330 | Nodemodule330 | PBN Module 3 Param 30 notification | ||
| 1.3.6.1.4.1.11606.0.331 | Nodemodule331 | PBN Module 3 Param 31 notification | ||
| 1.3.6.1.4.1.11606.0.410 | Nodemodule410 | PBN Module 4 Param 10 notification | ||
| 1.3.6.1.4.1.11606.0.411 | Nodemodule411 | PBN Module 4 Param 11 notification | ||
| 1.3.6.1.4.1.11606.0.415 | NodemauStatus5VTrap | |||
| 1.3.6.1.4.1.11606.0.416 | NodemauStatus12VTrap | |||
| 1.3.6.1.4.1.11606.0.417 | NodemauStatus24VTrap | |||
| 1.3.6.1.4.1.11606.0.418 | NodemauStatusInputOpticalPowerTrap | |||
| 1.3.6.1.4.1.11606.0.419 | NodemauStatusOutputOpticalPowerTrap | |||
| 1.3.6.1.4.1.11606.0.420 | NodemauStatusRFOutputTrap | |||
| 1.3.6.1.4.1.11606.0.421 | NodemauStatusTemperatureTrap | |||
| 1.3.6.1.4.1.11606.0.422 | NodemauStatusLidTrap | |||
| 1.3.6.1.4.1.11606.1 | Nodeocm | |||
| 1.3.6.1.4.1.11606.1.1 | ScalarpbnDevice | read-only | mandatory | PBN Networks Management Devices |
| 1.3.6.1.4.1.11606.1.2 | ScalardeviceAddress | read-write | mandatory | PBN Networks Management Device Address |
| 1.3.6.1.4.1.11606.1.3 | ScalarocmSlot | read-write | mandatory | The OCM slot of the PBN device |
| 1.3.6.1.4.1.11606.1.4 | ScalarocmPage | read-write | mandatory | The Device Page |
| 1.3.6.1.4.1.11606.1.5 | ScalarocmParam | read-write | mandatory | The Device Parameter |
| 1.3.6.1.4.1.11606.1.6 | ScalarocmParamStatus | read-only | mandatory | The parameter status |
| 1.3.6.1.4.1.11606.1.7 | ScalarocmParamString | read-only | mandatory | The parameter string |
| 1.3.6.1.4.1.11606.1.8 | ScalarocmWriteParameterValue | read-write | mandatory | The Write Parameter Value ID |
| 1.3.6.1.4.1.11606.1.9 | ScalarocmToggleParameterValue | read-write | mandatory | The Toggle Parameter Value ID |
| 1.3.6.1.4.1.11606.1.10 | ScalarocmReadParameterValue | read-only | mandatory | The Toggle Parameter Value ID |
| 1.3.6.1.4.1.11606.2 | Nodecpon100 | |||
| 1.3.6.1.4.1.11606.2.0 | Nodecpon100Trap | |||
| 1.3.6.1.4.1.11606.2.0.412 | Nodecpon100ContactInput | CPON-100 Tamper alarm | ||
| 1.3.6.1.4.1.11606.2.0.413 | Nodecpon100sensingInput | CPON-100 Battery alarm | ||
| 1.3.6.1.4.1.11606.2.0.414 | Nodecpon100CATVAlarm | CPON-100 CATV alarm | ||
| 1.3.6.1.4.1.11606.2.1 | ScalarcatvCtrl | read-write | mandatory | CATV Service Control |
| 1.3.6.1.4.1.11606.2.2 | ScalarmasterAlarmStatus | read-only | obsolete | Master Alarm Status |
| 1.3.6.1.4.1.11606.2.3 | ScalarcontactInput | read-only | mandatory | Tamper Status |
| 1.3.6.1.4.1.11606.2.4 | ScalarcatvStatus | read-only | mandatory | CATV Service Status |
| 1.3.6.1.4.1.11606.2.5 | ScalarsensingInput | read-only | mandatory | Sensing Input |
| 1.3.6.1.4.1.11606.2.6 | ScalarglobalPktSize | read-write | mandatory | Packet Size |
| 1.3.6.1.4.1.11606.2.7 | ScalarglobalMulticastStormProtection | read-write | mandatory | Multicast Storm Protection |
| 1.3.6.1.4.1.11606.2.8 | ScalarglobalFlowCtrl | read-write | mandatory | Flow Control |
| 1.3.6.1.4.1.11606.2.9 | ScalarglobalBackPressureMode | read-write | mandatory | Back Pressure Mode |
| 1.3.6.1.4.1.11606.2.10 | ScalarglobalPriorityBufferReserve | read-write | mandatory | Priority Buffer Reserve |
| 1.3.6.1.4.1.11606.2.11 | ScalarglobalPriorityScheme | read-write | mandatory | Priority Scheme Select |
| 1.3.6.1.4.1.11606.2.12 | Scalarglobal802dot1PBasedPriority | read-write | mandatory | 802.1p Based priority |
| 1.3.6.1.4.1.11606.2.13 | Scalarglobal802dot1qVLANEnable | read-write | mandatory | 802.1q VLAN enable |
| 1.3.6.1.4.1.11606.2.14 | ScalarglobalNullVIDReplacement | read-write | mandatory | Null VID Replacement |
| 1.3.6.1.4.1.11606.2.15 | ScalarsourceMACPauseCtrl | read-write | mandatory | Source Address MAC Pause |
| 1.3.6.1.4.1.11606.2.16 | ScalarglobalFastAge | read-write | mandatory | Fast Age |
| 1.3.6.1.4.1.11606.2.17 | Scalarcpon100MACAddr | read-only | mandatory | CPON-100 SNMP MAC Address |
| 1.3.6.1.4.1.11606.2.18 | Scalarcpon100TrapStatus | read-only | mandatory | CPON-100 Trap severity |
| 1.3.6.1.4.1.11606.2.19 | Scalarcpon100TrapMsg | read-only | mandatory | CPON-100 Trap Message |
| 1.3.6.1.4.1.11606.2.21 | NodevlanTable | |||
| 1.3.6.1.4.1.11606.2.21.1 | ScalarvlanAddr1 | read-write | mandatory | CPON-100-100 VLAN1 |
| 1.3.6.1.4.1.11606.2.21.2 | ScalarvlanAddr2 | read-write | mandatory | CPON-100 VLAN2 |
| 1.3.6.1.4.1.11606.2.21.3 | ScalarvlanAddr3 | read-write | mandatory | CPON-100 VLAN3 |
| 1.3.6.1.4.1.11606.2.22 | NodestaticMACTable | |||
| 1.3.6.1.4.1.11606.2.22.1 | ScalarstaticMAC1 | read-write | mandatory | Static MAC entry 1 |
| 1.3.6.1.4.1.11606.2.22.2 | ScalarstaticMAC2 | read-write | mandatory | Static MAC entry 2 |
| 1.3.6.1.4.1.11606.2.22.3 | ScalarstaticMAC3 | read-write | mandatory | Static MAC entry 3 |
| 1.3.6.1.4.1.11606.2.22.4 | ScalarstaticMAC4 | read-write | mandatory | Static MAC entry 4 |
| 1.3.6.1.4.1.11606.2.22.5 | ScalarstaticMAC5 | read-write | mandatory | Static MAC entry 5 |
| 1.3.6.1.4.1.11606.2.23 | NodedynamicMACTable | |||
| 1.3.6.1.4.1.11606.2.23.1 | ScalarmacEntryCnt | read-only | mandatory | Dynamic MAC Entry Count |
| 1.3.6.1.4.1.11606.2.23.2 | ScalarmacEntryID | read-write | mandatory | Dynamic MAC Entry ID |
| 1.3.6.1.4.1.11606.2.23.3 | ScalarmacEntry | read-only | mandatory | Dynamic MAC entry data |
| 1.3.6.1.4.1.11606.2.24 | Nodecpon100Port1 | |||
| 1.3.6.1.4.1.11606.2.24.1 | Scalarport1LinkStatus | read-only | mandatory | Port1 Link Status |
| 1.3.6.1.4.1.11606.2.24.2 | Scalarport1MDIXStatus | read-only | mandatory | Port1 MID-X Status |
| 1.3.6.1.4.1.11606.2.24.3 | Scalarport1AutoNegotiationStatus | read-only | mandatory | Port1 Auto-Negotiation Status |
| 1.3.6.1.4.1.11606.2.24.4 | Scalarport1LinkCapability | read-only | mandatory | Link Capability |
| 1.3.6.1.4.1.11606.2.24.5 | Scalarport1FlowCtrlCapability | read-only | mandatory | Port1 Flow Control Capability |
| 1.3.6.1.4.1.11606.2.24.6 | Scalarport1FarEndFaultStatus | read-only | mandatory | Port1 Far End Fault Status |
| 1.3.6.1.4.1.11606.2.24.7 | Scalarport1RxLoPriorityByte | read-only | mandatory | Port1 Receive Low Priority Octet Counter |
| 1.3.6.1.4.1.11606.2.24.8 | Scalarport1RxHiPriorityByte | read-only | mandatory | Port1 Receive High Priority Octet Counter |
| 1.3.6.1.4.1.11606.2.24.9 | Scalarport1UndersizePkt | read-only | mandatory | Port1 Undersize Packet Counter |
| 1.3.6.1.4.1.11606.2.24.12 | Scalarport1RxJabbers | read-only | mandatory | Port1 Receive Jabbers Counter |
| 1.3.6.1.4.1.11606.2.24.14 | Scalarport1CRCError | read-only | mandatory | Port1 CRC Error Counter |
| 1.3.6.1.4.1.11606.2.24.17 | Scalarport1RxPausePkts | read-only | mandatory | Port1 Receive Pause Packet Counter |
| 1.3.6.1.4.1.11606.2.24.18 | Scalarport1Broadcast | read-only | mandatory | Port1 Good Broadcast Packet counter |
| 1.3.6.1.4.1.11606.2.24.19 | Scalarport1RxMulticast | read-only | mandatory | Port1 Receive Good Multicast Packet Counter |
| 1.3.6.1.4.1.11606.2.24.20 | Scalarport1RxUnicast | read-only | mandatory | Port1 Receive Unicast Counter |
| 1.3.6.1.4.1.11606.2.24.21 | Scalarport1Rx64Octets | read-only | mandatory | Port1 Receive 64Octets Counter |
| 1.3.6.1.4.1.11606.2.24.22 | Scalarport1Rx65to127Octets | read-only | mandatory | Port1 Receive 65 to 127 Octets Counter |
| 1.3.6.1.4.1.11606.2.24.23 | Scalarport1Rx128to255Octets | read-only | mandatory | Port1 Receive 128 to 255 Octets Counter |
| 1.3.6.1.4.1.11606.2.24.24 | Scalarport1Rx256to511Octets | read-only | mandatory | Port1 Receive 256 to 511 Octets Counter |
| 1.3.6.1.4.1.11606.2.24.25 | Scalarport1Rx512to1023Octets | read-only | mandatory | Port1 Receive 512 to 1023 Octets Counter |
| 1.3.6.1.4.1.11606.2.24.26 | Scalarport1Rx1024to1522Octets | read-only | mandatory | Port1 Receive 1024 to 1522 Octets Counter |
| 1.3.6.1.4.1.11606.2.24.27 | Scalarport1TxLoPriorityByte | read-only | mandatory | Port1 Transmit Low Priority Good Octet Counter |
| 1.3.6.1.4.1.11606.2.24.28 | Scalarport1TxHiPriorityByte | read-only | mandatory | Port1 Transmit High Priority Good Octet Counter |
| 1.3.6.1.4.1.11606.2.24.30 | Scalarport1PausePkts | read-only | mandatory | Port1 Pause Packet Counter |
| 1.3.6.1.4.1.11606.2.24.31 | Scalarport1TxBroadcastPkts | read-only | mandatory | Port1 Transmit Good Broadcast Packet Counter |
| 1.3.6.1.4.1.11606.2.24.32 | Scalarport1TxMulticastPkts | read-only | mandatory | Port1 Transmit Good Multicast Packet Counter |
| 1.3.6.1.4.1.11606.2.24.33 | Scalarport1TxUnicastPkts | read-only | mandatory | Port1 Transmit Good Unicast Packet Counter |
| 1.3.6.1.4.1.11606.2.24.35 | Scalarport1TxTotalCollision | read-only | mandatory | Port1 Transmit Total Collision Packet Counter for half-duplex only |
| 1.3.6.1.4.1.11606.2.24.39 | Scalarport1TxDroppedPkts | read-only | mandatory | Port1 Transmit Drop Packet Counter |
| 1.3.6.1.4.1.11606.2.24.40 | Scalarport1RxDroppedPkts | read-only | mandatory | Port1 Receive Drop Packet Counter |
| 1.3.6.1.4.1.11606.2.24.45 | Nodecpon100Port1Ctrl | |||
| 1.3.6.1.4.1.11606.2.24.45.1 | Scalarport1CtrlDiffServPriority | read-write | mandatory | Port1 DiffServe Priority Control |
| 1.3.6.1.4.1.11606.2.24.45.2 | Scalarport1Ctrl802dot1pPriorityClass | read-write | mandatory | Port1 802.1p Priority Class Enable |
| 1.3.6.1.4.1.11606.2.24.45.3 | Scalarport1CtrlPortBasedPriority | read-write | mandatory | Port1 Port Based Priority |
| 1.3.6.1.4.1.11606.2.24.45.4 | Scalarport1CtrlPriorityCtrl | read-write | mandatory | Port1 Priority Enable |
| 1.3.6.1.4.1.11606.2.24.45.5 | Scalarport1CtrlAutoNegotiation | read-write | mandatory | Port1 Auto-Negotiation Enable |
| 1.3.6.1.4.1.11606.2.24.45.6 | Scalarport1CtrlForceFullDuplex | read-write | mandatory | Port1 Force Full-duplex |
| 1.3.6.1.4.1.11606.2.24.45.7 | Scalarport1CtrlBroadcastStormProtection | read-write | mandatory | Port1 Broadcast Storm Protection |
| 1.3.6.1.4.1.11606.2.24.45.8 | Scalarport1CtrlForceFlowCtrl | read-write | mandatory | Port1 Force Flow Control |
| 1.3.6.1.4.1.11606.2.24.45.9 | Scalarport1CtrlBackPressure | read-write | mandatory | Port1 Backpressure Enable |
| 1.3.6.1.4.1.11606.2.24.45.10 | Scalarport1CtrlTxEnable | read-write | mandatory | Port1 Transmit Enable |
| 1.3.6.1.4.1.11606.2.24.45.11 | Scalarport1CtrlRxEnable | read-write | mandatory | Port1 Receive Enable |
| 1.3.6.1.4.1.11606.2.24.45.12 | Scalarport1CtrlPowerDown | read-write | mandatory | Port1 Port Powerdown |
| 1.3.6.1.4.1.11606.2.24.45.13 | Scalarport1CtrlMACLoopBackTest | read-write | mandatory | Port1 MAC Loopback Test |
| 1.3.6.1.4.1.11606.2.24.45.14 | Scalarport1CtrlPHYLoopbackTest | read-write | mandatory | Port1 PHY Loopback Test |
| 1.3.6.1.4.1.11606.2.24.45.15 | Scalarport1CtrlRemoteLoopbackTest | read-write | mandatory | Port1 Remote Loopback Test |
| 1.3.6.1.4.1.11606.2.24.45.16 | Scalarport1CtrlTagInsertionRemoval | read-write | mandatory | Port1 Tag Insertion/Tag Removal |
| 1.3.6.1.4.1.11606.2.24.45.17 | Scalarport1CtrlPortMembership | read-write | mandatory | Port1 Port Membership |
| 1.3.6.1.4.1.11606.2.24.45.18 | Scalarport1CtrlIngressVLANFiltering | read-write | mandatory | Port1 Ingress VLAN Filtering |
| 1.3.6.1.4.1.11606.2.24.45.19 | Scalarport1CtrlDiscardNon-PVIDPkt | read-write | mandatory | Port1 Discard Non-PVID Packet |
| 1.3.6.1.4.1.11606.2.24.45.20 | Scalarport1CtrlDefaultTag | read-write | mandatory | Port1 Default Tag |
| 1.3.6.1.4.1.11606.2.24.45.21 | Scalarport1CtrlForceSpeed | read-write | mandatory | Port1 Force Speed |
| 1.3.6.1.4.1.11606.2.25 | Nodecpon100Port2 | |||
| 1.3.6.1.4.1.11606.2.25.1 | Scalarport2LinkStatus | read-only | mandatory | Port2 Link Status |
| 1.3.6.1.4.1.11606.2.25.2 | Scalarport2MDIXStatus | read-only | mandatory | Port2 MDI-X Status |
| 1.3.6.1.4.1.11606.2.25.3 | Scalarport2AutoNegotiationStatus | read-only | mandatory | Port2 Auto-Negotiation Status |
| 1.3.6.1.4.1.11606.2.25.4 | Scalarport2LinkCapability | read-only | mandatory | Port2 Link Capability |
| 1.3.6.1.4.1.11606.2.25.5 | Scalarport2FlowCtrlCapability | read-only | mandatory | Port2 Flow Control Capability |
| 1.3.6.1.4.1.11606.2.25.6 | Scalarport2FarEndFaultStatus | read-only | mandatory | Port2 Far End Fault Status |
| 1.3.6.1.4.1.11606.2.25.7 | Scalarport2RxLoPriorityByte | read-only | mandatory | Port2 Receive Low Priority Octet Counter |
| 1.3.6.1.4.1.11606.2.25.8 | Scalarport2RxHiPriorityByte | read-only | mandatory | Port2 Receive High Priority Octet Counter |
| 1.3.6.1.4.1.11606.2.25.9 | Scalarport2UndersizePkt | read-only | mandatory | Port2 Undersize Packet Counter |
| 1.3.6.1.4.1.11606.2.25.12 | Scalarport2RxJabbers | read-only | mandatory | Port2 Receive Jabbers Counter |
| 1.3.6.1.4.1.11606.2.25.14 | Scalarport2CRCError | read-only | mandatory | Port2 CRC Error Counter |
| 1.3.6.1.4.1.11606.2.25.17 | Scalarport2RxPausePkts | read-only | mandatory | Port2 Receive Pause Packet Counter |
| 1.3.6.1.4.1.11606.2.25.18 | Scalarport2Broadcast | read-only | mandatory | Port2 Broadcast Good Packet Counter |
| 1.3.6.1.4.1.11606.2.25.19 | Scalarport2RxMulticast | read-only | mandatory | Port2 Receive Multicast Good Packet Counter |
| 1.3.6.1.4.1.11606.2.25.20 | Scalarport2RxUnicast | read-only | mandatory | Port2 Receive Unicast Counter |
| 1.3.6.1.4.1.11606.2.25.21 | Scalarport2Rx64Octets | read-only | mandatory | Port2 Receive 64 Octets Counter |
| 1.3.6.1.4.1.11606.2.25.22 | Scalarport2Rx65to127Octets | read-only | mandatory | Port2 Receive 65 to 127 Octets Counter |
| 1.3.6.1.4.1.11606.2.25.23 | Scalarport2Rx128to255Octets | read-only | mandatory | Port2 Receive 128 to 255 Octets Counter |
| 1.3.6.1.4.1.11606.2.25.24 | Scalarport2Rx256to511Octets | read-only | mandatory | Port2 Receive 256 to 511 Octets Counter |
| 1.3.6.1.4.1.11606.2.25.25 | Scalarport2Rx512to1023Octets | read-only | mandatory | Port2 Receive 512 to 1023 Octets Counter |
| 1.3.6.1.4.1.11606.2.25.26 | Scalarport2Rx1024to1522Octets | read-only | mandatory | Port2 Receive 1024 to 1522 Octets Counter |
| 1.3.6.1.4.1.11606.2.25.27 | Scalarport2TxLoPriorityByte | read-only | mandatory | Port2 Transmit Low Priority Packet Counter |
| 1.3.6.1.4.1.11606.2.25.28 | Scalarport2TxHiPriorityByte | read-only | mandatory | Port2 Transmit High Priority Packet Counter |
| 1.3.6.1.4.1.11606.2.25.30 | Scalarport2PausePkts | read-only | mandatory | Port2 Pause Packet Counter |
| 1.3.6.1.4.1.11606.2.25.31 | Scalarport2TxBroadcastPkts | read-only | mandatory | Port2 Transmit Broadcast Packet Counter |
| 1.3.6.1.4.1.11606.2.25.32 | Scalarport2TxMulticastPkts | read-only | mandatory | Port2 Transmit Multicast Packet Counter |
| 1.3.6.1.4.1.11606.2.25.33 | Scalarport2TxUnicastPkts | read-only | mandatory | Port2 Transmit Unicast Packet Counter |
| 1.3.6.1.4.1.11606.2.25.35 | Scalarport2TxTotalCollision | read-only | mandatory | Port2 Transmit Total Collision Packet Counter |
| 1.3.6.1.4.1.11606.2.25.39 | Scalarport2TxDroppedPkts | read-only | mandatory | Port2 Transmit Dropped Packet Counter |
| 1.3.6.1.4.1.11606.2.25.40 | Scalarport2RxDroppedPkts | read-only | mandatory | Port2 Receive Dropped Packet Counter |
| 1.3.6.1.4.1.11606.2.25.45 | Nodeport2Ctrl | |||
| 1.3.6.1.4.1.11606.2.25.45.1 | Scalarport2CtrlDiffServPriority | read-write | mandatory | Port2 DiffServe Priority Control |
| 1.3.6.1.4.1.11606.2.25.45.2 | Scalarport2Ctrl802dot1pPriorityClass | read-write | mandatory | Port2 802.1p Priority Class Enable |
| 1.3.6.1.4.1.11606.2.25.45.3 | Scalarport2CtrlPortBasedPriority | read-write | mandatory | Port2 802.1p Priority Class Enable |
| 1.3.6.1.4.1.11606.2.25.45.4 | Scalarport2CtrlPriorityCtrl | read-write | mandatory | Port2 Priority Enable |
| 1.3.6.1.4.1.11606.2.25.45.5 | Scalarport2CtrlAutoNegotiation | read-write | mandatory | Port2 Auto-Negotiation Enable |
| 1.3.6.1.4.1.11606.2.25.45.6 | Scalarport2CtrlForcedFullDuplex | read-write | mandatory | Port2 Force Full-duplex |
| 1.3.6.1.4.1.11606.2.25.45.7 | Scalarport2CtrlBroadcastStormProtection | read-write | mandatory | Port2 Broadcast Storm Protection Enable |
| 1.3.6.1.4.1.11606.2.25.45.8 | Scalarport2CtrlForceFlowCtrl | read-write | mandatory | Port2 Force Flow Control |
| 1.3.6.1.4.1.11606.2.25.45.9 | Scalarport2CtrlBackPressure | read-write | mandatory | Port2 Back Pressure Enable |
| 1.3.6.1.4.1.11606.2.25.45.10 | Scalarport2CtrlTxEnable | read-write | mandatory | Port2 Transmit Enable |
| 1.3.6.1.4.1.11606.2.25.45.11 | Scalarport2CtrlRxEnable | read-write | mandatory | Port2 Receive Enable |
| 1.3.6.1.4.1.11606.2.25.45.12 | Scalarport2CtrlPowerDown | read-write | mandatory | Port2 Powerdown |
| 1.3.6.1.4.1.11606.2.25.45.13 | Scalarport2CtrlMACLoopBackTest | read-write | mandatory | Port2 MAC Loopback Test |
| 1.3.6.1.4.1.11606.2.25.45.14 | Scalarport2CtrlPHYLoopbackTest | read-write | mandatory | Port2 PHY Loopback Test |
| 1.3.6.1.4.1.11606.2.25.45.15 | Scalarport2CtrlRemoteLoopbackTest | read-write | mandatory | Port2 Remote Loopback Test |
| 1.3.6.1.4.1.11606.2.25.45.16 | Scalarport2CtrlTagInsertionRemoval | read-write | mandatory | Port2 Tag Insertion/Tag Removal |
| 1.3.6.1.4.1.11606.2.25.45.17 | Scalarport2CtrlPortMembership | read-write | mandatory | Port2 Port Membership |
| 1.3.6.1.4.1.11606.2.25.45.18 | Scalarport2CtrlIngressVLANFiltering | read-write | mandatory | Port2 Ingress VLAN Filtering |
| 1.3.6.1.4.1.11606.2.25.45.19 | Scalarport2CtrlDiscardNon-PVIDPkt | read-write | mandatory | Port2 Discard Non-PVID Packet |
| 1.3.6.1.4.1.11606.2.25.45.20 | Scalarport2CtrlDefaultTag | read-write | mandatory | Port2 Default Tag |
| 1.3.6.1.4.1.11606.2.25.45.21 | Scalarport2CtrlForceSpeed | read-write | mandatory | Port2 Force Speed |
| 1.3.6.1.4.1.11606.2.26 | Nodecpon100PriUplink | |||
| 1.3.6.1.4.1.11606.2.26.1 | ScalarpriUplinkLinkStatus | read-only | mandatory | Uplink Link Status |
| 1.3.6.1.4.1.11606.2.26.45 | NodepriUplinkPortCtrl | |||
| 1.3.6.1.4.1.11606.2.26.45.15 | ScalarpriUplinkLinkRemoteLoopbackTest | read-only | mandatory | Primary uplink Link Remote loopback test |
| 1.3.6.1.4.1.11606.2.26.45.22 | ScalarpriUplinkTxLoPriorityRateCtrl | read-write | mandatory | Primary Uplink Transmit Low Priority Rate Control |
| 1.3.6.1.4.1.11606.2.26.45.23 | ScalarpriUplinkRxLoPriorityRateCtrl | read-write | mandatory | Primary Uplink Receive Low Priority Rate Control |
| 1.3.6.1.4.1.11606.2.26.45.24 | ScalarpriUplinkTxDiffPriorityRateCtrl | read-write | mandatory | Primary Uplink Transmit Differential Priority Rate Control |
| 1.3.6.1.4.1.11606.3 | Nodeodnrt100 | |||
| 1.3.6.1.4.1.11606.4 | Nodeoslam8g | |||
| 1.3.6.1.4.1.11606.4.1 | Nodeoslam8g-Global | |||
| 1.3.6.1.4.1.11606.4.1.1 | Nodeoslam8g-globalCtrl | |||
| 1.3.6.1.4.1.11606.4.1.1.1 | Scalaroslam8gSrcMACAddr | read-write | mandatory | OSLAM-8G Source MAC address =========================== 48bit Source address MAC address for pause control frame. NOTE: First bit of 2nd octet is as followed: … |
| 1.3.6.1.4.1.11606.4.1.1.2 | Scalaroslam8gSchedulingMode | read-write | mandatory | OSLAM-8G Scheduling Mode ========================= 1 - Use an 8,4,2,1 weighted fair queuing scheme 2 - Us a strict priority scheme |
| 1.3.6.1.4.1.11606.4.1.1.3 | Scalaroslam8gMaxFrameSize | read-write | mandatory | Maximum Frame Size allowed. =========================== The Ingress block discards all frames less than 64 bytes in size. It also discards all frames greater t… |
| 1.3.6.1.4.1.11606.4.1.1.4 | Scalaroslam8gCoreTag | read-write | mandatory | OSLAM-8G Core Tag Type ====================== Core Tag Ether Type. This EtherType is added to frames that egress the switch as Double Tagged frames. It is also… |
| 1.3.6.1.4.1.11606.4.1.1.5 | Scalaroslam8gUseDoubleTagData | read-write | mandatory | OSLAM-8G Use Double Tag Data ============================ Used to determine if Double Tag data is removed from a Double Tag frame is used or ignored when makin… |
| 1.3.6.1.4.1.11606.4.1.2 | Nodeoslam8g-globalStatus | |||
| 1.3.6.1.4.1.11606.4.1.2.1 | Scalaroslam8gSerialNumber | read-only | mandatory | OSLAM-8G Serial Number |
| 1.3.6.1.4.1.11606.4.1.2.2 | Scalaroslam8gMACAddress | read-only | mandatory | OSLAM-8G SNMP MAC Address |
| 1.3.6.1.4.1.11606.4.1.2.3 | Scalaroslam8gDiagnosticMsg | read-only | mandatory | OSLAM-8G Diagnostic Message |
| 1.3.6.1.4.1.11606.4.1.3 | Nodeoslam8g-VTU | |||
| 1.3.6.1.4.1.11606.4.1.3.1 | ScalarvtuOperation | read-write | mandatory | VLAN Table Unit Table Operation =============================== Support the following VTU operation. 0, 2 - No Operation 1 - Flush All Entries 3 - Load(1) or P… |
| 1.3.6.1.4.1.11606.4.1.3.2 | ScalarvtuDBNum | read-write | mandatory | VTU MAC Address Database Number =============================== On all vtuOperation except for Get Violation Data, this field is used to separate MAC address d… |
| 1.3.6.1.4.1.11606.4.1.3.3 | ScalarvtuMemberViolation | read-only | mandatory | VTU Member Violation ================== Source Member Violation. On Get/Clear Violation Data vtuOperation, this value is returned set to a two(2) if the Violat… |
| 1.3.6.1.4.1.11606.4.1.3.4 | ScalarvtuMissViolation | read-only | mandatory | VTU Miss Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to 802.1Q Miss Viol… |
| 1.3.6.1.4.1.11606.4.1.3.5 | ScalarvtuValid | read-write | mandatory | VTU Entry Valid status. ======================= At the end of Get/Next operations 1 - If VID is all ones, it indicates the end of the VID list was reached with… |
| 1.3.6.1.4.1.11606.4.1.3.6 | ScalarvtuVID | read-write | mandatory | VLAN Identifier =============== This VID is used in all the vtuOperation commands (except Get/Clear Violation Data) and it is the VID that is associated with t… |
| 1.3.6.1.4.1.11606.4.1.3.7 | ScalarvtuData | read-write | mandatory | VLAN table data Entry Format as follow: ====================== BYTE#: 5 4 3 2 1 0 Frame: [0:P10][P9:P8][P7:P6][P5:P4][P3:P2][P1:P0] Px: Port control Size: 4bit… |
| 1.3.6.1.4.1.11606.4.1.3.8 | ScalarvtuVIDPRI | read-write | mandatory | VID Priority ============ These bits are used to override the priority on any frames associated with this VID value, if the 'vtuVIDPRIOverride' is set to one. |
| 1.3.6.1.4.1.11606.4.1.3.9 | ScalarvtuVIDPRIOverride | read-write | mandatory | VID Priority Override ===================== 1 - No priority override. 2 - The vtuVIDPRI are used to override the priority on any frames associated with this VI… |
| 1.3.6.1.4.1.11606.4.1.4 | Nodeoslam8g-ATU | |||
| 1.3.6.1.4.1.11606.4.1.4.1 | ScalaratuOperation | read-write | mandatory | Address Translation Unit (ATU) Opcode: ====================================== 1 - Flush All Entries 2 - Flush all Non-Static Entries 3 - Load or Purge an Entry… |
| 1.3.6.1.4.1.11606.4.1.4.2 | ScalaratuDBNum | read-write | mandatory | ATU MAC Address Database Number (DBNum) ======================================= If multiple address databases are not being used theses bits must remain zero. … |
| 1.3.6.1.4.1.11606.4.1.4.3 | ScalaratuMemberViolation | read-only | mandatory | ATU Member Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Source Addre… |
| 1.3.6.1.4.1.11606.4.1.4.4 | ScalaratuMissViolation | read-only | mandatory | ATU Miss Violation ================== On Get/CLear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Source Address… |
| 1.3.6.1.4.1.11606.4.1.4.5 | ScalaratuFullViolation | read-only | mandatory | ATU Full Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Load operation… |
| 1.3.6.1.4.1.11606.4.1.4.6 | ScalaratuAgeTime | read-write | mandatory | ATU Age Time ============ These bits determine the time that each ATU Entry remains valid in the database, since its last access as a source address, before be… |
| 1.3.6.1.4.1.11606.4.1.4.7 | ScalaratuTrunkMode | read-only | mandatory | TRUNK - Trunk Mappped Address ============================= 1 - The 'atuPortVec' is the port vector assigned to this address. 2 - The data bits [7:4] of 'atuPo… |
| 1.3.6.1.4.1.11606.4.1.4.8 | ScalaratuPortVecorTrunkID | read-write | mandatory | Port Vector/Trunk ID ==================== If the atuTrunk is zero, theses bits are used as the input Port Vector for ATU Load operations and it's the resulting… |
| 1.3.6.1.4.1.11606.4.1.4.9 | ScalaratuEntryState | read-write | mandatory | ATU Entry State =============== Used as the Entry State for ATU Load/Purge or Flush/Move operations and it is the resulting Entry State from ATU Get Next opera… |
| 1.3.6.1.4.1.11606.4.1.4.10 | ScalaratuMACEntry | read-write | mandatory | ATU MAC Address Entry: ====================== Byte pattern as follow: Opaque data Location: 5 4 3 2 1 0 MAC Byte Location : [5][4][3][2][1][0] |
| 1.3.6.1.4.1.11606.4.2 | Nodeoslam8g-Port | |||
| 1.3.6.1.4.1.11606.4.2.1 | Scalaroslam8gPortSelect | read-write | mandatory | |
| 1.3.6.1.4.1.11606.4.2.2 | Nodeoslam8g-portCtrl | |||
| 1.3.6.1.4.1.11606.4.2.2.1 | Scalaroslam8gPortForceFlowCtrl | read-write | mandatory | OSLAM-8G Port Force Flow Control Setting ======================================== 1 - Force No Flow Control 2 - Normal detection occurs 3 - Force Flow Control |
| 1.3.6.1.4.1.11606.4.2.2.2 | Scalaroslam8gPortForceLink | read-write | mandatory | OSLAM-8G Port Force Link ======================== 1 - Force to bring link down 2 - Normal link detection occurs 3 - Force to bring link up |
| 1.3.6.1.4.1.11606.4.2.2.3 | Scalaroslam8gPortForceDuplex | read-write | mandatory | OSLAM-8G Port Force Duplex Control ================================== 1 - Force Half-Duplex 2 - Normal duplex detection occurs. 3 - Force Full-Duplex |
| 1.3.6.1.4.1.11606.4.2.2.4 | Scalaroslam8gPortForceSpeed | read-write | mandatory | OSLAM-8G Port Force Speed ========================= 1 - 10Mbps 2 - 100Mbps 3 - 1000Mbps 4 - Speed is not forced. Normal speed detection occurs. |
| 1.3.6.1.4.1.11606.4.2.2.5 | Scalaroslam8gPortPortState | read-write | mandatory | OSLAM-8G Port's Port State =========================== This OID is used to manage a port to determine what kind of frames, if any, are allowed to enter or leav… |
| 1.3.6.1.4.1.11606.4.2.2.6 | Scalaroslam8gPortFwdUnknown | read-write | mandatory | OSLAM-8G Port Forward Unknown ============================= 1 - Unicast frames with unknown DAs will not egress out of this port. 2 - Normal operation occurs a… |
| 1.3.6.1.4.1.11606.4.2.2.7 | Scalaroslam8gPortDefFwd | read-write | mandatory | OSLAM-8G Port Default Forward ============================= 1 - Multicast frames with unknown DAs do not egress from this port. 2 - Normal switch operation occ… |
| 1.3.6.1.4.1.11606.4.2.2.8 | Scalaroslam8gPortUseIPForPriority | read-write | mandatory | OSLAM-8G Port Use IP for Priority ================================= Use IPv4 TOS and/or DiffServ fields and/or IPv6 Traffic Class fields, if present, for prior… |
| 1.3.6.1.4.1.11606.4.2.2.9 | Scalaroslam8gPortUseCoreTag | read-write | mandatory | OSLAM-8G Port Use Core Tag ========================== Refer to 'oslam8gCoreTag' 1 - Ingressing frames are considered tagged if the 16-bits following the frame'… |
| 1.3.6.1.4.1.11606.4.2.2.10 | Scalaroslam8gPortDoubleTag | read-write | mandatory | OSLAM-8G Port Double Tag ======================== Ingress Double Tag 2 - The ingressing frames are examined to see if they contain 802.3ac tag with the IEEE st… |
| 1.3.6.1.4.1.11606.4.2.3 | Nodeoslam8g-portRateCtrl | |||
| 1.3.6.1.4.1.11606.4.2.3.1 | Scalaroslam8gPortEgressRate | read-write | mandatory | OSLAM-8G Port Egress Rate Limit ================================ Modify this port's effective transmission rate. This support 62kbps to 256Mbps. Formula to lim… |
| 1.3.6.1.4.1.11606.4.2.3.2 | Scalaroslam8gPortIngressLimitMode | read-write | mandatory | OSLAM-8G Port Ingress Limit Mode ================================ Determine what kinds of frames are limited and counted against Ingress limiting. 1 - Limit an… |
| 1.3.6.1.4.1.11606.4.2.3.3 | Scalaroslam8gPortIngressPri3Rate | read-write | mandatory | OSLAM-8G Port Priority 3 Rate Control ===================================== Priority 3 frames are discarded after the ingress rate selected below is reached or… |
| 1.3.6.1.4.1.11606.4.2.3.4 | Scalaroslam8gPortIngressPri2Rate | read-write | mandatory | OSLAM-8G Port Priority 2 Rate Control ===================================== Priority 2 frames are discarded after the ingress rate selected below is reached or… |
| 1.3.6.1.4.1.11606.4.2.3.5 | Scalaroslam8gPortIngressPri1Rate | read-write | mandatory | OSLAM-8G Port Priority 1 Rate Control ===================================== Priority 1 frames are discarded after the ingress rate selected below is reached or… |
| 1.3.6.1.4.1.11606.4.2.3.6 | Scalaroslam8gPortIngressPri0Rate | read-write | mandatory | OSLAM-8G Port Priority 0 Rate Control ===================================== Priority 1 frames are discarded after the ingress rate selected below is reached or… |
| 1.3.6.1.4.1.11606.4.2.4 | Nodeoslam8g-PortVLAN | |||
| 1.3.6.1.4.1.11606.4.2.4.1 | Scalaroslam8gPortUseTag | read-write | mandatory | OSLAM-8G Port Use Tag ===================== Use IEEE Tags. Use IEEE 802.1p Traffic Class field for priority data if the frame is an IEEE 802.3ac tagged frame. … |
| 1.3.6.1.4.1.11606.4.2.4.2 | Scalaroslam8gPortPortMembership | read-write | mandatory | OSLAM-8G Port's Port Membership =============================== Port based VLAN Table. The bits in this value are used to restrict which output ports this inpu… |
| 1.3.6.1.4.1.11606.4.2.4.3 | Scalaroslam8gPortDefPri | read-write | mandatory | OSLAM-8G Port Default Priority ============================== Used as the default ingress priority to use when no other priority information is available (neit… |
| 1.3.6.1.4.1.11606.4.2.4.4 | Scalaroslam8gPort802dot1QMode | read-write | mandatory | OSLAM-8G Port 802.1Q Mode ========================= IEEE 802.1Q Mode for this port. These bits determine if 802.1Q based VLANs are used along with port based V… |
| 1.3.6.1.4.1.11606.4.2.4.5 | Scalaroslam8gPortTagUntagDiscard | read-write | mandatory | OSLAM-8G Port Tagged/Untagged Discard Mode ========================================== 1 - No discard of Frames 2 - Only Discard Untagged Frames. All non-MGMT f… |
| 1.3.6.1.4.1.11606.4.2.4.6 | Scalaroslam8gPortDefVID | read-write | mandatory | OSLAM-8G Port Default VLAN Identifier ===================================== When 802.1Q is enabled on this port this value is used as the IEEE Tagged VID added… |
| 1.3.6.1.4.1.11606.4.2.4.7 | Scalaroslam8gPortVLANTunnel | read-write | mandatory | OSLAM-8G Port VLAN Tunnel ========================= 1 - The port based VLANs defined in oslam8gPortPortMembership, 802.1Q VLANs defined in the oslam8g-802dot1Q… |
| 1.3.6.1.4.1.11606.4.2.4.8 | Scalaroslam8gPortVTUPriOverride | read-write | mandatory | OSLAM-8G Port VTU Priority Override =================================== 1 - Normal frame priority processing occurs. 2 - The VTU priority overrides can occur o… |
| 1.3.6.1.4.1.11606.4.2.4.9 | Scalaroslam8gPortForceDefVID | read-write | mandatory | OSLAM-8G Port Force Default VID =============================== For to use Default VID. When 802.1Q is enabled on this port and 1 - All IEEE 802.3ac Tagged fra… |
| 1.3.6.1.4.1.11606.4.2.4.10 | Scalaroslam8gEgressMode | read-write | mandatory | OSLAM-8G Port Egress Mode ========================= The first three Egrress Modes are used as the default Egress mode for frames whose VID is not valid in the … |
| 1.3.6.1.4.1.11606.4.2.4.11 | Scalaroslam8gPortPriRemap | read-write | mandatory | OSLAM-8G Port IEEE Priority Remapping ==================================== Byte#: 3 2 1 0 Format: [TagRemap7:TagRemap6][TagRemap5:TagRemap4][TagRemap3:TagRemap… |
| 1.3.6.1.4.1.11606.4.2.5 | Nodeoslam8g-portStatus | |||
| 1.3.6.1.4.1.11606.4.2.5.1 | Scalaroslam8gPortLinkStatus | read-only | mandatory | Link Status: ============ This indicates the link status of the selected port 1 - Link is down 2 - Link is Up |
| 1.3.6.1.4.1.11606.4.2.5.2 | Scalaroslam8gPortDuplexStatus | read-only | mandatory | Duplex Mode: ============ Valid if link status is up. 1 - Half-Duplex 2 - Full-Duplex |
| 1.3.6.1.4.1.11606.4.2.5.3 | Scalaroslam8gPortSpeedStatus | read-only | mandatory | Speed Mode: =========== Valid if link status is up. 1 - 10MBps 2 - 100MBps 3 - 1000MBps 4 - Reserved for future used |
| 1.3.6.1.4.1.11606.4.2.6 | Nodeoslam8g-portRMON | |||
| 1.3.6.1.4.1.11606.4.2.6.1 | Nodeoslam8gPortRMONIngress | |||
| 1.3.6.1.4.1.11606.4.2.6.1.1 | Scalaroslam8gPortInGoodOctetsLo | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.2 | Scalaroslam8gPortInGoodOctetsHi | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.3 | Scalaroslam8gPortInBadOctets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.4 | Scalaroslam8gPortInUnicast | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.5 | Scalaroslam8gPortInBroadcasts | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.6 | Scalaroslam8gPortInMulticasts | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.7 | Scalaroslam8gPortInPause | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.8 | Scalaroslam8gPortInUndersize | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.9 | Scalaroslam8gPortInFragments | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.10 | Scalaroslam8gPortInOversize | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.11 | Scalaroslam8gPortInJabber | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.12 | Scalaroslam8gPortInRxErr | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.13 | Scalaroslam8gPortInFCSErr | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.14 | Scalaroslam8gPortInDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.1.15 | Scalaroslam8gPortInFiltered | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2 | Nodeoslam8gPortRMONEgress | |||
| 1.3.6.1.4.1.11606.4.2.6.2.1 | Scalaroslam8gPortOutOctetsLo | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.2 | Scalaroslam8gPortOutOctetsHi | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.3 | Scalaroslam8gPortOutUnicast | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.4 | Scalaroslam8gPortOutBroadcasts | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.5 | Scalaroslam8gPortOutMulticasts | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.6 | Scalaroslam8gPortOutPause | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.7 | Scalaroslam8gPortOutExcessive | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.8 | Scalaroslam8gPortOutCollisions | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.9 | Scalaroslam8gPortOutDeferred | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.10 | Scalaroslam8gPortOutSingle | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.11 | Scalaroslam8gPortOutMultiple | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.12 | Scalaroslam8gPortOutFCSErr | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.13 | Scalaroslam8gPortOutLate | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.2.14 | Scalaroslam8gPortOutFiltered | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.3 | Nodeoslam8gPortHistogram | |||
| 1.3.6.1.4.1.11606.4.2.6.3.1 | Scalaroslam8gPortHistogramMode | read-write | mandatory | Histogram Counters Mode: ======================== The Histogram mode control how the Histogram counters work as follows. 1 - Count received frames only 2 - Cou… |
| 1.3.6.1.4.1.11606.4.2.6.3.2 | Scalaroslam8gPortOut64Octets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.3.3 | Scalaroslam8gPortOut65to127Octets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.3.4 | Scalaroslam8gPortOut128to255Octets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.3.5 | Scalaroslam8gPortOut256to511Octets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.3.6 | Scalaroslam8gPortOut512to1023Octets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.4.2.6.3.7 | Scalaroslam8gPortOut1024toMaxOctets | read-only | mandatory | |
| 1.3.6.1.4.1.11606.5 | Nodefpcm | |||
| 1.3.6.1.4.1.11606.5.1 | ScalartargetNodeAddress | read-write | mandatory | Target Node Address: ==================== FPCM is a broadcast device. 10 digits decimal address required to access the target optical node. Value of 4294967295… |
| 1.3.6.1.4.1.11606.5.2 | Nodeodn4pAccess | |||
| 1.3.6.1.4.1.11606.5.2.1 | Scalarodn4pABSwitchingMode | read-write | mandatory | AB Switching Mode: ================== The mode of operation for ODN4P-AB. Available operation mode are: - AUTOMATIC - MANUAL |
| 1.3.6.1.4.1.11606.5.2.2 | Scalarodn4pChannelSelect | read-write | mandatory | Channel Select: =============== The channel to be selected by the AB redundancy switch. Upon changing the channel, AB operation mode at the target device will … |
| 1.3.6.1.4.1.11606.5.2.3 | Scalarodn4pSwitchingHysteresis | read-write | mandatory | Switch Hysteresis: ================== Primary Optical recovery level. |
| 1.3.6.1.4.1.11606.5.2.4 | Scalarodn4pPrimarySwitchOverTime | read-write | mandatory | Primary switch-over time: ========================= The number of second wait required before change of state |
| 1.3.6.1.4.1.11606.5.2.5 | Scalarodn4pSecondarySwitchOverTime | read-write | mandatory | Secondary switch-over time: =========================== The number of second wait required before change of state |
| 1.3.6.1.4.1.11606.5.2.6 | Scalarodn4pAttenuator1 | read-write | mandatory | Attenuator 1: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB |
| 1.3.6.1.4.1.11606.5.2.7 | Scalarodn4pAttenuator2 | read-write | mandatory | Attenuator 2: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB |
| 1.3.6.1.4.1.11606.5.2.8 | Scalarodn4pAttenuator3 | read-write | mandatory | Attenuator 3: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB |
| 1.3.6.1.4.1.11606.5.2.9 | Scalarodn4pAttenuator4 | read-write | mandatory | Attenuator 4: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB |
| 1.3.6.1.4.1.11606.5.2.10 | Scalarodn4pHomeFskChannel | read-write | mandatory | Remote node FSK home channel: ============================= Each network may use different default FSK channel. This is the default FSK channel to be managed b… |
| 1.3.6.1.4.1.11606.5.2.11 | Scalarodn4pFskMode | read-write | mandatory | FSK Operating mode ================== Force FSK to operate in either FIX or AGILE mode. FIX - FSK receiver always try to lock to the known FSK frequency AGILE … |
| 1.3.6.1.4.1.11606.5.2.12 | Scalarodn4pLoopTest | read-write | mandatory | ODN4P LOOP TEST =============== Acceptable value is 0-255 or 8-bit number. Value between between 1..255 will be display on the connected RPQRM of the selected … |
| 1.3.6.1.4.1.11606.5.3 | NodenodeAccess | |||
| 1.3.6.1.4.1.11606.5.3.1 | ScalarnodeAccessDataLength | read-write | mandatory | Node Access Control Data Length: ================================ This usually used by remote management software (NMS3) Operator should ignore or do not chang… |
| 1.3.6.1.4.1.11606.5.3.2 | ScalarnodeAccessData | read-write | mandatory | Node Access Control Data: ========================= This usually used by remote management software (NMS3) Operator should ignore or do not change this OID val… |
| 1.3.6.1.4.1.11606.5.3.3 | ScalarnodeAccessCmd | read-write | mandatory | Node Access Control Command: ============================ This usually used by remote management software (NMS3) Operator should ignore or do not change this O… |
| 1.3.6.1.4.1.11606.5.4 | NodefpcmCtrl | |||
| 1.3.6.1.4.1.11606.5.4.1 | ScalarfpcmFSKChannel | read-write | mandatory | FSK Channel modulated by FPCM: ============================== Acceptable FSK channel range 0-100. FSK modulation range 80-90MHz (Channel 0-100 respectively) |
| 1.3.6.1.4.1.11606.5.4.2 | ScalarfpcmRFLevel | read-write | mandatory | FPCM RF level ============= RF level setting in 1dBmV scale. Current supported value is 25-45dBmV |
| 1.3.6.1.4.1.11606.6 | Nodemau | |||
| 1.3.6.1.4.1.11606.6.1 | NodemauProductInfo | |||
| 1.3.6.1.4.1.11606.6.1.1 | ScalarmauProductModelName | read-only | mandatory | Product model name |
| 1.3.6.1.4.1.11606.6.1.2 | ScalarmauProductVersion | read-only | mandatory | Product version number |
| 1.3.6.1.4.1.11606.6.1.3 | ScalarmauProductVersionDate | read-only | mandatory | Product build date |
| 1.3.6.1.4.1.11606.6.1.4 | ScalarmauProductMAC | read-only | mandatory | |
| 1.3.6.1.4.1.11606.6.1.5 | ScalarmauProductSerialNumber | read-only | mandatory | |
| 1.3.6.1.4.1.11606.6.2 | NodemauStatus | |||
| 1.3.6.1.4.1.11606.6.2.1 | ScalarmauStatusVACType | read-only | mandatory | VAC input type. e.g. '220V' |
| 1.3.6.1.4.1.11606.6.2.2 | ScalarmauStatus5V | read-only | mandatory | +5V supply voltage level. Unit is in Volt e.g. 4.92V |
| 1.3.6.1.4.1.11606.6.2.3 | ScalarmauStatus12V | read-only | mandatory | +12V supply voltage level. Unit is in Volt e.g. 12.00V |
| 1.3.6.1.4.1.11606.6.2.4 | ScalarmauStatus24V | read-only | mandatory | +24V supply voltage level. Unit is in Volt e.g. 24.10V |
| 1.3.6.1.4.1.11606.6.2.5 | ScalarmauStatusInputOpticalPower | read-only | mandatory | Optical input power level. Unit is in dBm e.g. -2.05dBm |
| 1.3.6.1.4.1.11606.6.2.6 | ScalarmauStatusOutputOpticalPower | read-only | mandatory | Optical input power level. Unit is in dBm e.g. -2.05dBm |
| 1.3.6.1.4.1.11606.6.2.7 | ScalarmauStatusRFOutputPower | read-only | mandatory | Total RF output power level. Unit is in dBmV e.g. 41.23dBmV total or 25.00dBmV/Ch@42Ch. |
| 1.3.6.1.4.1.11606.6.2.8 | ScalarmauStatusTemperature | read-only | mandatory | Module internal temperature. Unit is in Degree Celsius e.g. 29.25C |
| 1.3.6.1.4.1.11606.6.2.9 | ScalarmauStatusLid | read-only | mandatory | Device lid open/close status |
| 1.3.6.1.4.1.11606.6.2.10 | ScalarmauStatusONUInstalled | read-only | mandatory | EPON-ONU installed status. |
| 1.3.6.1.4.1.11606.6.2.11 | ScalarmauStatusMOCAInstalled | read-only | mandatory | MOCA installed status. |
| 1.3.6.1.4.1.11606.6.2.12 | ScalarmauStatusPLCInstalled | read-only | mandatory | PLC installed status. |
| 1.3.6.1.4.1.11606.6.2.13 | ScalarmauStatusLED | read-only | mandatory | Status LED |
| 1.3.6.1.4.1.11606.6.2.14 | ScalarmauStatusGainControlLED | read-only | mandatory | Gain control LED (AGC/MGC) status. ON - AGC mode OFF - MGC mode |
| 1.3.6.1.4.1.11606.6.2.15 | ScalarmauStatusOpticalInputHighLED | read-only | mandatory | Optical input high led indicator ON - Optical input is too high. |
| 1.3.6.1.4.1.11606.6.2.16 | ScalarmauStatusOpticalInputLowLED | read-only | mandatory | Optical input LOW led indicator ON - Optical input is too low. |
| 1.3.6.1.4.1.11606.6.2.17 | ScalarmauStatus5VMin | read-only | mandatory | +5V Supply MIN voltage alarm level |
| 1.3.6.1.4.1.11606.6.2.18 | ScalarmauStatus5VMax | read-only | mandatory | +5V Supply MAX voltage alarm level |
| 1.3.6.1.4.1.11606.6.2.19 | ScalarmauStatus12VMin | read-only | mandatory | +12V Supply MIN voltage alarm level |
| 1.3.6.1.4.1.11606.6.2.20 | ScalarmauStatus12VMax | read-only | mandatory | +12V Supply MAX voltage alarm level |
| 1.3.6.1.4.1.11606.6.2.21 | ScalarmauStatus24VMin | read-only | mandatory | +24V Supply MIN voltage alarm level |
| 1.3.6.1.4.1.11606.6.2.22 | ScalarmauStatus24VMax | read-only | mandatory | +24V Supply MAX voltage alarm level |
| 1.3.6.1.4.1.11606.6.2.23 | ScalarmauStatusInputOpticalPowerMin | read-only | mandatory | Optical Input Power MIN alarm level |
| 1.3.6.1.4.1.11606.6.2.24 | ScalarmauStatusInputOpticalPowerMax | read-only | mandatory | Optical Input Power MAX alarm level |
| 1.3.6.1.4.1.11606.6.2.25 | ScalarmauStatusOutputOpticalPowerMin | read-only | mandatory | Optical Output Power MIN alarm level |
| 1.3.6.1.4.1.11606.6.2.26 | ScalarmauStatusOutputOpticalPowerMax | read-only | mandatory | Optical Output Power MAX alarm level |
| 1.3.6.1.4.1.11606.6.2.27 | ScalarmauStatusTemperatureMin | read-only | mandatory | Temperature MIN alarm level |
| 1.3.6.1.4.1.11606.6.2.28 | ScalarmauStatusTemperatureMax | read-only | mandatory | Temperature MAX alarm level |
| 1.3.6.1.4.1.11606.6.2.29 | ScalarmauStatusGainControlMin | read-only | mandatory | Gain Control MIN Level |
| 1.3.6.1.4.1.11606.6.2.30 | ScalarmauStatusGainControlMax | read-only | mandatory | Gain Control MAX Level |
| 1.3.6.1.4.1.11606.6.2.31 | ScalarmauStatusAgcLock | read-only | mandatory | AGC lock when the controlled signal is within range. AGC unlock when agc cannot control the signal or signal is out of range for AGC to operate. |
| 1.3.6.1.4.1.11606.6.3 | NodemauControl | |||
| 1.3.6.1.4.1.11606.6.3.1 | ScalarmauGainControlMode | read-write | mandatory | RF gain control setting. 1dB control step. Control range to be adviced. |
| 1.3.6.1.4.1.11606.6.3.2 | ScalarmauTrapEnabled | read-write | mandatory | Indicates if this trap entry is enabled or not. |
| 1.3.6.1.4.1.11606.6.3.3 | ScalarmauPrimaryCommunity | read-write | mandatory | Primary Community String to be used by agent for SNMP GET/SET for mauTrapPrimaryReceiverIPAddress |
| 1.3.6.1.4.1.11606.6.3.4 | ScalarmauSecondaryCommunity | read-write | mandatory | Secondary Community String to be used by agent for SNMP GET/SET for mauTrapSecondaryReceiverIPAddress |
| 1.3.6.1.4.1.11606.6.3.5 | ScalarmauPrimaryTrapReceiverIPAddress | read-write | mandatory | The primary Trap Receiver station IP address |
| 1.3.6.1.4.1.11606.6.3.6 | ScalarmauSecondaryTrapReceiverIPAddress | read-write | mandatory | The secondary Trap Receiver station IP address |
| 1.3.6.1.4.1.11606.6.4 | NodemauTraps | |||
| 1.3.6.1.4.1.11606.6.4.1 | ScalarmauTrapMessageDescr | read-write | mandatory | |
| 1.3.6.1.4.1.11606.7 | Nodelte153 | |||
| 1.3.6.1.4.1.11606.7.1 | Nodelte153Laser | |||
| 1.3.6.1.4.1.11606.7.1.1 | ScalartagID | read-write | current | Displays the tag name of the device in human-readable format as set by user. |
| 1.3.6.1.4.1.11606.7.1.2 | ScalarmodelNumber | read-only | current | Displays the name of the device model number in human-readable format as set from the factory. |
| 1.3.6.1.4.1.11606.7.1.3 | ScalarmfgDate | read-only | current | Displays the manufacturing date in human-readable format as set from the factory. |
| 1.3.6.1.4.1.11606.7.1.4 | ScalarserialNum | read-only | current | Displays the serial number in human-readable format as set from the factory. |
| 1.3.6.1.4.1.11606.7.1.5 | ScalarfirmwareRev | read-only | current | Displays the software revision of the device in human-readable format. |
| 1.3.6.1.4.1.11606.7.1.6 | ScalarengRev | read-only | current | Displays the engineering revision in human-readable format as set from the factory. |
| 1.3.6.1.4.1.11606.7.1.7 | ScalarsystemTemp | read-only | current | Returns the unit temperature. |
| 1.3.6.1.4.1.11606.7.1.8 | ScalarlaserCurrent | read-only | current | Returns measured laser bias current. |
| 1.3.6.1.4.1.11606.7.1.9 | ScalarlaserTemperature | read-only | current | Returns the measured laser temperature. |
| 1.3.6.1.4.1.11606.7.1.10 | ScalarinputRFLevel | read-only | current | Returns the input RF level. |
| 1.3.6.1.4.1.11606.7.1.11 | ScalarcompositeRFLevel | read-only | current | Returns the measured composite RF level. |
| 1.3.6.1.4.1.11606.7.1.12 | ScalaropticalPowerOut1 | read-only | current | Returns the optical power output for port 1. |
| 1.3.6.1.4.1.11606.7.1.13 | ScalaropticalPowerOut2 | read-only | current | Returns the optical power output for port 2. |
| 1.3.6.1.4.1.11606.7.1.14 | ScalartecCurrent | read-only | current | Returns the current of thermoelectric cooler inside the laser asssembly. |
| 1.3.6.1.4.1.11606.7.1.15 | ScalarattenuationSet | read-write | current | Manual mode RF attenuator setpoint. |
| 1.3.6.1.4.1.11606.7.1.16 | ScalaromiSetpoint | read-write | current | Optical modulation index is implemented for CW or Video AGC modes as RF attenuator setpoint. |
| 1.3.6.1.4.1.11606.7.1.17 | ScalaragcMode | read-write | current | Returns the AGC mode. |
| 1.3.6.1.4.1.11606.7.1.18 | ScalarsbsSuppression | read-write | current | SBS suppression level. |
| 1.3.6.1.4.1.11606.7.1.19 | ScalarfiberDispersionCntl | read-write | current | Fiber dispersion compensation On/Off control. |
| 1.3.6.1.4.1.11606.7.1.20 | ScalarfiberDispersionGain | read-write | current | Fiber dispersion gain compensation. |
| 1.3.6.1.4.1.11606.7.1.21 | ScalarfiberDispersionPhase | read-write | current | Fiber dispersion phase compensation. |
| 1.3.6.1.4.1.11606.7.1.22 | ScalarfiberDispersionSlope | read-write | current | Fiber dispersion slope compensation. |
| 1.3.6.1.4.1.11606.7.1.23 | ScalarlaserOnOff | read-only | current | returns the active laser On/Off status. |
| 1.3.6.1.4.1.11606.7.1.24 | Scalarkeyswitch | read-only | current | Returns the status of the front panel keyswitch. |
| 1.3.6.1.4.1.11606.7.1.25 | ScalarremoteLaserControl | read-write | current | Remote laser On/Off control. |
| 1.3.6.1.4.1.11606.7.1.26 | ScalarresetCause | read-only | current | This object reports the cause of the last reset. |
| 1.3.6.1.4.1.11606.7.1.27 | ScalarresetControl | read-write | current | This object is used to reset the transmitter module by writing a 1 to it. Other values written to the object have no effect. Reading the object returns a 1 and… |
| 1.3.6.1.4.1.11606.7.1.28 | Scalarsbs2GHzPower | read-only | current | 2GHz SBS output power level. |
| 1.3.6.1.4.1.11606.7.1.29 | Scalarsbs6GHzPower | read-only | current | 6GHz SBS output power level. |
| 1.3.6.1.4.1.11606.7.1.30 | Scalarmonitor5v | read-only | current | Returns the measured value of the +5V supply. |
| 1.3.6.1.4.1.11606.7.1.31 | Scalarmonitor12v | read-only | current | Returns the measured value of the +12V supply. |
| 1.3.6.1.4.1.11606.7.1.32 | Scalarmonitor24v | read-only | current | Returns the measured value of the +24V supply. |
| 1.3.6.1.4.1.11606.7.1.33 | ScalarmonitorM5v | read-only | current | Returns the measured value of the -5V supply. |
| 1.3.6.1.4.1.11606.7.1.34 | ScalarmonitorM12v | read-only | current | Returns the measured value of the -12V supply. |
| 1.3.6.1.4.1.11606.7.1.35 | ScalarunitStatusEnable | read-write | current | Indicates the unit status alarm enable. This value is bit encoded therefore it is capable of indicating multiple alarm enable conditions. The bits are defined … |
| 1.3.6.1.4.1.11606.7.1.36 | ScalarunitStatusMajor | read-only | current | Returns a bit mapped status word where each bit set (as defined below) indicates a specific active alarm: 0 1 2 3 4 5 6 7 + |System |System | Laser | Laser | L… |
| 1.3.6.1.4.1.11606.7.1.37 | ScalarunitStatusMinor | read-only | current | Returns a bit mapped status word where each bit set (as defined below) indicates a specific active warning: 0 1 2 3 4 5 6 7 + |System |System | Laser | Laser |… |
| 1.3.6.1.4.1.11606.7.1.38 | ScalarunitStatusHistory | read-write | current | Returns a bit mapped status word where each bit set (as defined below) indicates a an alarm had occurred since the last power up or clear: 0 1 2 3 4 5 6 7 + |S… |
| 1.3.6.1.4.1.11606.7.1.39 | ScalarmiscStatusEnable | read-write | current | Indicates the miscellaneous status alarm enable. This value is bit encoded therefore it is capable of indicating multiple alarm enable conditions. The bits are… |
| 1.3.6.1.4.1.11606.7.1.40 | ScalarmiscStatusMajor | read-only | current | Returns a bit mapped status word where each bit set (as defined below) indicates a specific active alarm: 0 1 2 3 4 5 6 7 + | 2 GHz | 2 GHz | 6 GHz | 6 GHz |Sy… |
| 1.3.6.1.4.1.11606.7.1.41 | ScalarmiscStatusMinor | read-only | current | Returns a bit mapped status word where each bit set (as defined below) indicates a specific active warning: 0 1 2 3 4 5 6 7 + | 2 GHz | 2 GHz | 6 GHz | 6 GHz |… |
| 1.3.6.1.4.1.11606.7.1.42 | ScalarmiscStatusHistory | read-write | current | Returns a bit mapped status word where each bit set (as defined below) indicates a an alarm had occurred since the last power up or clear: 0 1 2 3 4 5 6 7 + | … |
| 1.3.6.1.4.1.11606.7.1.43 | ScalarfrontPanelLEDStatus | read-only | current | Returns a bit mapped status word where each bit set (as defined below) indicates a specific LED state: 0 1 2 3 4 5 + | Laser | Laser |Status |Status |Status |L… |
| 1.3.6.1.4.1.11606.7.1.45 | NodetransmitterNotificationPrefix | |||
| 1.3.6.1.4.1.11606.7.1.45.0 | NodetransmitterCommonNotifications | |||
| 1.3.6.1.4.1.11606.7.1.45.0.0 | NotificationtransmitterNoAlarmsPresent | current | No alarms are present. | |
| 1.3.6.1.4.1.11606.7.1.45.0.1 | NotificationtransmitterSystemTemperatureHigh | current | The system temperature has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.2 | NotificationtransmitterSystemTemperatureLow | current | The system temperature has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.3 | NotificationtransmitterLaserCurrentHigh | current | The laser current has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.4 | NotificationtransmitterLaserCurrentLow | current | The laser current has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.5 | NotificationtransmitterLaserTemperatureHigh | current | The laser temperature has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.6 | NotificationtransmitterLaserTemperatureLow | current | The laser temperature has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.7 | NotificationtransmitterInputRFLevelHigh | current | The input RF level has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.8 | NotificationtransmitterInputRFLevelLow | current | The input RF level has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.9 | NotificationtransmitterOpticalPowerOutputHigh | current | The optical power output has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.10 | NotificationtransmitterOpticalPowerOutputLow | current | The optical power output has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.11 | NotificationtransmitterTECCurrentHigh | current | The thermoelectric cooler current has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.12 | NotificationtransmitterAGCUnlocked | current | The RF attenuator automatic gain control (AGC) is outside its normal operating range. | |
| 1.3.6.1.4.1.11606.7.1.45.0.13 | NotificationtransmitterKeySwitchOffPosition | current | The key switch is in the OFF position. | |
| 1.3.6.1.4.1.11606.7.1.45.0.14 | NotificationtransmitterRemoteLaserOffMode | current | The remote laser control is commanded to be in OFF mode. | |
| 1.3.6.1.4.1.11606.7.1.45.0.15 | Notificationtransmitter2GHzSBSPowerHigh | current | The 2GHz SBS output power has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.16 | Notificationtransmitter2GHzSBSPowerLow | current | The 2GHz SBS output power has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.17 | Notificationtransmitter6GHzSBSPowerHigh | current | The 6GHz SBS output power has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.18 | Notificationtransmitter6GHzSBSPowerLow | current | The 6GHz SBS output power has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.19 | NotificationtransmitterSystem5VPowerHigh | current | The system +5V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.20 | NotificationtransmitterSystem5VPowerLow | current | The system +5V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.21 | NotificationtransmitterSystem12VPowerHigh | current | The system +12V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.22 | NotificationtransmitterSystem12VPowerLow | current | The system +12V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.23 | NotificationtransmitterSystem24VPowerHigh | current | The system +24V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.24 | NotificationtransmitterSystem24VPowerLow | current | The system +24V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.25 | NotificationtransmitterSystemM5VPowerHigh | current | The system -5V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.26 | NotificationtransmitterSystemM5VPowerLow | current | The system -5V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.27 | NotificationtransmitterSystemM12VPowerHigh | current | The system -12V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.28 | NotificationtransmitterSystemM12VPowerLow | current | The system -12V power supply has exceeded its normal operating value. | |
| 1.3.6.1.4.1.11606.7.1.45.0.29 | NotificationtransmitterCommunicationFailure | current | A failure was detected with the internal network communication interface. | |
| 1.3.6.1.4.1.11606.7.1.45.0.30 | NotificationtransmitterPowerSupplyAFailure | current | A failure was detected with power supply module A. | |
| 1.3.6.1.4.1.11606.7.1.45.0.31 | NotificationtransmitterPowerSupplyBFailure | current | A failure was detected with power supply module B. | |
| 1.3.6.1.4.1.11606.7.1.45.0.32 | NotificationtransmitterCoolingFanAFailure | current | A failure was detected with cooling fan A. | |
| 1.3.6.1.4.1.11606.7.1.45.0.33 | NotificationtransmitterCoolingFanBFailure | current | A failure was detected with cooling fan B. | |
| 1.3.6.1.4.1.11606.7.2 | Nodelte153PowerSupply | |||
| 1.3.6.1.4.1.11606.7.2.1 | ScalarpowerSupplyType | read-only | current | Returns the installed power supply type. single5V(1) - Single AC/DC power supply with rated output of 5V at 100W. dualRedundant5V(2) - Dual, redundant AC/DC po… |
| 1.3.6.1.4.1.11606.7.2.2 | ScalarpowerSupplyTemp | read-only | current | Returns the power supply regulator temperature. |
| 1.3.6.1.4.1.11606.7.2.3 | ScalarpowerSupplyStatusA | read-only | current | Returns the operating status of power supply A. |
| 1.3.6.1.4.1.11606.7.2.4 | ScalarpowerSupplyStatusB | read-only | current | Returns the operating status of power supply B. |
| 1.3.6.1.4.1.11606.7.2.5 | ScalarcoolingFanA | read-only | current | Returns the operating status of chassis cooling fan A. |
| 1.3.6.1.4.1.11606.7.2.6 | ScalarcoolingFanB | read-only | current | Returns the operating status of chassis cooling fan B. |
| 1.3.6.1.4.1.11606.7.2.7 | ScalarupTime | read-only | current | Returns the number of elapsed seconds since the last time the unit restarted. |
| 1.3.6.1.4.1.11606.7.2.8 | NodepowerSupplyNotificationPrefix | |||
| 1.3.6.1.4.1.11606.7.2.8.0 | NodepowerSupplyNotifications | |||
| 1.3.6.1.4.1.11606.7.2.8.0.0 | NotificationpowerSupplyNoAlarmsPresent | current | No alarms are present. | |
| 1.3.6.1.4.1.11606.7.2.8.0.1 | NotificationpowerSupplyPowerSupplyFailureA | current | A failure was detected with power supply module A. | |
| 1.3.6.1.4.1.11606.7.2.8.0.2 | NotificationpowerSupplyPowerSupplyFailureB | current | A failure was detected with power supply module B. | |
| 1.3.6.1.4.1.11606.7.2.8.0.3 | NotificationpowerSupplyCoolingFanFailureA | current | A failure was detected with chassis cooling fan A. | |
| 1.3.6.1.4.1.11606.7.2.8.0.4 | NotificationpowerSupplyCoolingFanFailureB | current | A failure was detected with chassis cooling fan B. |