PCE-PCEP-MIB
146 objects
This MIB module defines a collection of objects for managing the Path Computation Element Communication Protocol (PCEP). Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
| INET-ADDRESS-MIB | -- RFC 2580 InetAddressType InetAddress |
| SNMPv2-CONF | -- RFC 2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TruthValue TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.227 | IdentitypcePcepMIB | This MIB module defines a collection of objects for managing the Path Computation Element Communication Protocol (PCEP). Copyright (c) 2014 IETF Trust and the … | ||
| 1.3.6.1.2.1.227.0 | NodepcePcepNotifications | |||
| 1.3.6.1.2.1.227.0.1 | NotificationpcePcepSessUp | current | This notification is sent when the value of pcePcepSessState enters the sessionUp state. | |
| 1.3.6.1.2.1.227.0.2 | NotificationpcePcepSessDown | current | This notification is sent when the value of pcePcepSessState leaves the sessionUp state. | |
| 1.3.6.1.2.1.227.0.3 | NotificationpcePcepSessLocalOverload | current | This notification is sent when the local PCEP entity enters overload state for a peer. | |
| 1.3.6.1.2.1.227.0.4 | NotificationpcePcepSessLocalOverloadClear | current | This notification is sent when the local PCEP entity leaves overload state for a peer. | |
| 1.3.6.1.2.1.227.0.5 | NotificationpcePcepSessPeerOverload | current | This notification is sent when a peer enters overload state. | |
| 1.3.6.1.2.1.227.0.6 | NotificationpcePcepSessPeerOverloadClear | current | This notification is sent when a peer leaves overload state. | |
| 1.3.6.1.2.1.227.1 | NodepcePcepObjects | |||
| 1.3.6.1.2.1.227.1.1 | TablepcePcepEntityTable | not-accessible | current | This table contains information about local PCEP entities. The entries in this table are read-only. |
| 1.3.6.1.2.1.227.1.1.1 | RowpcePcepEntityEntry | not-accessible | current | This entry represents a local PCEP entity. |
| 1.3.6.1.2.1.227.1.1.1.1 | ColumnpcePcepEntityIndex | not-accessible | current | This index is used to uniquely identify the PCEP entity. |
| 1.3.6.1.2.1.227.1.1.1.2 | ColumnpcePcepEntityAdminStatus | read-only | current | The administrative status of this PCEP entity. This is the desired operational status as currently set by an operator or by default in the implementation. The … |
| 1.3.6.1.2.1.227.1.1.1.3 | ColumnpcePcepEntityOperStatus | read-only | current | The operational status of the PCEP entity. It takes one of the following values. - operStatusUp(1): the PCEP entity is active. - operStatusDown(2): the PCEP en… |
| 1.3.6.1.2.1.227.1.1.1.4 | ColumnpcePcepEntityAddrType | read-only | current | The type of the PCEP entity's Internet address. This object specifies how the value of the pcePcepEntityAddr object should be interpreted. Only values unknown(… |
| 1.3.6.1.2.1.227.1.1.1.5 | ColumnpcePcepEntityAddr | read-only | current | The local Internet address of this PCEP entity. The type is given by pcePcepEntityAddrType. If operating as a PCE server, the PCEP entity listens on this addre… |
| 1.3.6.1.2.1.227.1.1.1.6 | ColumnpcePcepEntityConnectTimer | read-only | current | The time that the PCEP entity will wait to establish a TCP connection with a peer. If a TCP connection is not established within this time, then PCEP aborts th… |
| 1.3.6.1.2.1.227.1.1.1.7 | ColumnpcePcepEntityConnectMaxRetry | read-only | current | The maximum number of times the system tries to establish a TCP connection to a peer before the session with the peer transitions to the idle state. When the s… |
| 1.3.6.1.2.1.227.1.1.1.8 | ColumnpcePcepEntityInitBackoffTimer | read-only | current | The initial backoff time for retrying a failed session setup attempt to a peer. The backoff time increases for each failed session setup attempt, until a maxim… |
| 1.3.6.1.2.1.227.1.1.1.9 | ColumnpcePcepEntityMaxBackoffTimer | read-only | current | The maximum backoff time for retrying a failed session setup attempt to a peer. The backoff time increases for each failed session setup attempt, until this ma… |
| 1.3.6.1.2.1.227.1.1.1.10 | ColumnpcePcepEntityOpenWaitTimer | read-only | current | The time that the PCEP entity will wait to receive an Open message from a peer after the TCP connection has come up. If no Open message is received within this… |
| 1.3.6.1.2.1.227.1.1.1.11 | ColumnpcePcepEntityKeepWaitTimer | read-only | current | The time that the PCEP entity will wait to receive a Keepalive or PCErr message from a peer during session initialization after receiving an Open message. If n… |
| 1.3.6.1.2.1.227.1.1.1.12 | ColumnpcePcepEntityKeepAliveTimer | read-only | current | The Keepalive transmission timer that this PCEP entity will propose in the initial OPEN message of each session it is involved in. This is the maximum time bet… |
| 1.3.6.1.2.1.227.1.1.1.13 | ColumnpcePcepEntityDeadTimer | read-only | current | The DeadTimer that this PCEP entity will propose in the initial OPEN message of each session it is involved in. This is the time after which a peer should decl… |
| 1.3.6.1.2.1.227.1.1.1.14 | ColumnpcePcepEntityAllowNegotiation | read-only | current | Whether the PCEP entity will permit negotiation of session parameters. |
| 1.3.6.1.2.1.227.1.1.1.15 | ColumnpcePcepEntityMaxKeepAliveTimer | read-only | current | In PCEP session parameter negotiation, the maximum value that this PCEP entity will accept from a peer for the interval between Keepalive transmissions. Zero m… |
| 1.3.6.1.2.1.227.1.1.1.16 | ColumnpcePcepEntityMaxDeadTimer | read-only | current | In PCEP session parameter negotiation, the maximum value that this PCEP entity will accept from a peer for the DeadTimer. Zero means that the PCEP entity will … |
| 1.3.6.1.2.1.227.1.1.1.17 | ColumnpcePcepEntityMinKeepAliveTimer | read-only | current | In PCEP session parameter negotiation, the minimum value that this PCEP entity will accept for the interval between Keepalive transmissions. Zero means that th… |
| 1.3.6.1.2.1.227.1.1.1.18 | ColumnpcePcepEntityMinDeadTimer | read-only | current | In PCEP session parameter negotiation, the minimum value that this PCEP entity will accept for the DeadTimer. Zero means that the PCEP entity insists on not ru… |
| 1.3.6.1.2.1.227.1.1.1.19 | ColumnpcePcepEntitySyncTimer | read-only | current | The value of SyncTimer is used in the case of a synchronized path computation request using the SVEC object. Consider the case where a PCReq message is receive… |
| 1.3.6.1.2.1.227.1.1.1.20 | ColumnpcePcepEntityRequestTimer | read-only | current | The maximum time that the PCEP entity will wait for a response to a PCReq message. |
| 1.3.6.1.2.1.227.1.1.1.21 | ColumnpcePcepEntityMaxSessions | read-only | current | The maximum number of sessions involving this PCEP entity that can exist at any time. |
| 1.3.6.1.2.1.227.1.1.1.22 | ColumnpcePcepEntityMaxUnknownReqs | read-only | current | The maximum number of unrecognized requests and replies that any session on this PCEP entity is willing to accept per minute before terminating the session. A … |
| 1.3.6.1.2.1.227.1.1.1.23 | ColumnpcePcepEntityMaxUnknownMsgs | read-only | current | The maximum number of unknown messages that any session on this PCEP entity is willing to accept per minute before terminating the session. |
| 1.3.6.1.2.1.227.1.2 | TablepcePcepPeerTable | not-accessible | current | This table contains information about peers known by the local PCEP entity. The entries in this table are read-only. This table gives peer information that spa… |
| 1.3.6.1.2.1.227.1.2.1 | RowpcePcepPeerEntry | not-accessible | current | Information about a single peer that spans all PCEP sessions to that peer. |
| 1.3.6.1.2.1.227.1.2.1.1 | ColumnpcePcepPeerAddrType | not-accessible | current | The type of the peer's Internet address. This object specifies how the value of the pcePcepPeerAddr object should be interpreted. Only values unknown(0), ipv4(… |
| 1.3.6.1.2.1.227.1.2.1.2 | ColumnpcePcepPeerAddr | not-accessible | current | The Internet address of the peer. The type is given by pcePcepPeerAddrType. |
| 1.3.6.1.2.1.227.1.2.1.3 | ColumnpcePcepPeerRole | read-only | current | The role that this peer took the last time a session was established. It takes one of the following values. - unknown(0): this peer's role is not known. - pcc(… |
| 1.3.6.1.2.1.227.1.2.1.4 | ColumnpcePcepPeerDiscontinuityTime | read-only | current | The value of sysUpTime at the time that the information and statistics in this row were last reset. |
| 1.3.6.1.2.1.227.1.2.1.5 | ColumnpcePcepPeerInitiateSession | read-only | current | Indicates whether the local PCEP entity initiates sessions to this peer or waits for the peer to initiate a session. |
| 1.3.6.1.2.1.227.1.2.1.6 | ColumnpcePcepPeerSessionExists | read-only | current | Indicates whether a session with this peer currently exists. |
| 1.3.6.1.2.1.227.1.2.1.7 | ColumnpcePcepPeerNumSessSetupOK | read-only | current | The number of PCEP sessions successfully established with the peer, including any current session. This counter is incremented each time a session with this pe… |
| 1.3.6.1.2.1.227.1.2.1.8 | ColumnpcePcepPeerNumSessSetupFail | read-only | current | The number of PCEP sessions with the peer that have been attempted but failed before being fully established. This counter is incremented each time a session r… |
| 1.3.6.1.2.1.227.1.2.1.9 | ColumnpcePcepPeerSessionUpTime | read-only | current | The value of sysUpTime the last time a session with this peer was successfully established. If pcePcepPeerNumSessSetupOK is zero, then this object contains zer… |
| 1.3.6.1.2.1.227.1.2.1.10 | ColumnpcePcepPeerSessionFailTime | read-only | current | The value of sysUpTime the last time a session with this peer failed to be established. If pcePcepPeerNumSessSetupFail is zero, then this object contains zero. |
| 1.3.6.1.2.1.227.1.2.1.11 | ColumnpcePcepPeerSessionFailUpTime | read-only | current | The value of sysUpTime the last time a session with this peer failed from active. If pcePcepPeerNumSessSetupOK is zero, then this object contains zero. |
| 1.3.6.1.2.1.227.1.2.1.12 | ColumnpcePcepPeerAvgRspTime | read-only | current | The average response time for this peer. If an average response time has not been calculated for this peer, then this object has the value zero. If pcePcepPeer… |
| 1.3.6.1.2.1.227.1.2.1.13 | ColumnpcePcepPeerLWMRspTime | read-only | current | The smallest (low-water mark) response time seen from this peer. If no responses have been received from this peer, then this object has the value zero. If pce… |
| 1.3.6.1.2.1.227.1.2.1.14 | ColumnpcePcepPeerHWMRspTime | read-only | current | The greatest (high-water mark) response time seen from this peer. If no responses have been received from this peer, then this object has the value zero. If pc… |
| 1.3.6.1.2.1.227.1.2.1.15 | ColumnpcePcepPeerNumPCReqSent | read-only | current | The number of PCReq messages sent to this peer. |
| 1.3.6.1.2.1.227.1.2.1.16 | ColumnpcePcepPeerNumPCReqRcvd | read-only | current | The number of PCReq messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.17 | ColumnpcePcepPeerNumPCRepSent | read-only | current | The number of PCRep messages sent to this peer. |
| 1.3.6.1.2.1.227.1.2.1.18 | ColumnpcePcepPeerNumPCRepRcvd | read-only | current | The number of PCRep messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.19 | ColumnpcePcepPeerNumPCErrSent | read-only | current | The number of PCErr messages sent to this peer. |
| 1.3.6.1.2.1.227.1.2.1.20 | ColumnpcePcepPeerNumPCErrRcvd | read-only | current | The number of PCErr messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.21 | ColumnpcePcepPeerNumPCNtfSent | read-only | current | The number of PCNtf messages sent to this peer. |
| 1.3.6.1.2.1.227.1.2.1.22 | ColumnpcePcepPeerNumPCNtfRcvd | read-only | current | The number of PCNtf messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.23 | ColumnpcePcepPeerNumKeepaliveSent | read-only | current | The number of Keepalive messages sent to this peer. |
| 1.3.6.1.2.1.227.1.2.1.24 | ColumnpcePcepPeerNumKeepaliveRcvd | read-only | current | The number of Keepalive messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.25 | ColumnpcePcepPeerNumUnknownRcvd | read-only | current | The number of unknown messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.26 | ColumnpcePcepPeerNumCorruptRcvd | read-only | current | The number of corrupted PCEP messages received from this peer. |
| 1.3.6.1.2.1.227.1.2.1.27 | ColumnpcePcepPeerNumReqSent | read-only | current | The number of requests sent to this peer. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepPeerNumPCReqSent be… |
| 1.3.6.1.2.1.227.1.2.1.28 | ColumnpcePcepPeerNumSvecSent | read-only | current | The number of SVEC objects sent to this peer in PCReq messages. An SVEC object represents a set of synchronized requests. |
| 1.3.6.1.2.1.227.1.2.1.29 | ColumnpcePcepPeerNumSvecReqSent | read-only | current | The number of requests sent to this peer that appeared in one or more SVEC objects. |
| 1.3.6.1.2.1.227.1.2.1.30 | ColumnpcePcepPeerNumReqSentPendRep | read-only | current | The number of requests that have been sent to this peer for which a response is still pending. |
| 1.3.6.1.2.1.227.1.2.1.31 | ColumnpcePcepPeerNumReqSentEroRcvd | read-only | current | The number of requests that have been sent to this peer for which a response with an ERO was received. Such responses indicate that a path was successfully com… |
| 1.3.6.1.2.1.227.1.2.1.32 | ColumnpcePcepPeerNumReqSentNoPathRcvd | read-only | current | The number of requests that have been sent to this peer for which a response with a NO-PATH object was received. Such responses indicate that the peer could no… |
| 1.3.6.1.2.1.227.1.2.1.33 | ColumnpcePcepPeerNumReqSentCancelRcvd | read-only | current | The number of requests that were canceled by the peer with a PCNtf message. This might be different than pcePcepPeerNumPCNtfRcvd because not all PCNtf messages… |
| 1.3.6.1.2.1.227.1.2.1.34 | ColumnpcePcepPeerNumReqSentErrorRcvd | read-only | current | The number of requests that were rejected by the peer with a PCErr message. This might be different than pcePcepPeerNumPCErrRcvd because not all PCErr messages… |
| 1.3.6.1.2.1.227.1.2.1.35 | ColumnpcePcepPeerNumReqSentTimeout | read-only | current | The number of requests that have been sent to a peer and have been abandoned because the peer has taken too long to respond to them. |
| 1.3.6.1.2.1.227.1.2.1.36 | ColumnpcePcepPeerNumReqSentCancelSent | read-only | current | The number of requests that were sent to the peer and explicitly canceled by the local PCEP entity sending a PCNtf. |
| 1.3.6.1.2.1.227.1.2.1.37 | ColumnpcePcepPeerNumReqSentClosed | read-only | current | The number of requests that were sent to the peer and implicitly canceled when the session they were sent over was closed. |
| 1.3.6.1.2.1.227.1.2.1.38 | ColumnpcePcepPeerNumReqRcvd | read-only | current | The number of requests received from this peer. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepPeerNumPCReqR… |
| 1.3.6.1.2.1.227.1.2.1.39 | ColumnpcePcepPeerNumSvecRcvd | read-only | current | The number of SVEC objects received from this peer in PCReq messages. An SVEC object represents a set of synchronized requests. |
| 1.3.6.1.2.1.227.1.2.1.40 | ColumnpcePcepPeerNumSvecReqRcvd | read-only | current | The number of requests received from this peer that appeared in one or more SVEC objects. |
| 1.3.6.1.2.1.227.1.2.1.41 | ColumnpcePcepPeerNumReqRcvdPendRep | read-only | current | The number of requests that have been received from this peer for which a response is still pending. |
| 1.3.6.1.2.1.227.1.2.1.42 | ColumnpcePcepPeerNumReqRcvdEroSent | read-only | current | The number of requests that have been received from this peer for which a response with an ERO was sent. Such responses indicate that a path was successfully c… |
| 1.3.6.1.2.1.227.1.2.1.43 | ColumnpcePcepPeerNumReqRcvdNoPathSent | read-only | current | The number of requests that have been received from this peer for which a response with a NO-PATH object was sent. Such responses indicate that the local PCEP … |
| 1.3.6.1.2.1.227.1.2.1.44 | ColumnpcePcepPeerNumReqRcvdCancelSent | read-only | current | The number of requests received from this peer that were canceled by the local PCEP entity sending a PCNtf message. This might be different than pcePcepPeerNum… |
| 1.3.6.1.2.1.227.1.2.1.45 | ColumnpcePcepPeerNumReqRcvdErrorSent | read-only | current | The number of requests received from this peer that were rejected by the local PCEP entity sending a PCErr message. This might be different than pcePcepPeerNum… |
| 1.3.6.1.2.1.227.1.2.1.46 | ColumnpcePcepPeerNumReqRcvdCancelRcvd | read-only | current | The number of requests that were received from the peer and explicitly canceled by the peer sending a PCNtf. |
| 1.3.6.1.2.1.227.1.2.1.47 | ColumnpcePcepPeerNumReqRcvdClosed | read-only | current | The number of requests that were received from the peer and implicitly canceled when the session they were received over was closed. |
| 1.3.6.1.2.1.227.1.2.1.48 | ColumnpcePcepPeerNumRepRcvdUnknown | read-only | current | The number of responses to unknown requests received from this peer. A response to an unknown request is a response whose RP object does not contain the reques… |
| 1.3.6.1.2.1.227.1.2.1.49 | ColumnpcePcepPeerNumReqRcvdUnknown | read-only | current | The number of unknown requests that have been received from a peer. An unknown request is a request whose RP object contains a request ID of zero. |
| 1.3.6.1.2.1.227.1.3 | TablepcePcepSessTable | not-accessible | current | A table of PCEP sessions that involve the local PCEP entity. Each entry in this table represents a single session. The entries in this table are read-only. An … |
| 1.3.6.1.2.1.227.1.3.1 | RowpcePcepSessEntry | not-accessible | current | This entry represents a single PCEP session in which the local PCEP entity participates. This entry exists only if the corresponding PCEP session has been init… |
| 1.3.6.1.2.1.227.1.3.1.1 | ColumnpcePcepSessInitiator | not-accessible | current | The initiator of the session; that is, whether the TCP connection was initiated by the local PCEP entity or the peer. There is a window during session initiali… |
| 1.3.6.1.2.1.227.1.3.1.2 | ColumnpcePcepSessStateLastChange | read-only | current | The value of sysUpTime at the time this session entered its current state as denoted by the pcePcepSessState object. |
| 1.3.6.1.2.1.227.1.3.1.3 | ColumnpcePcepSessState | read-only | current | The current state of the session. The set of possible states excludes the idle state since entries do not exist in this table in the idle state. |
| 1.3.6.1.2.1.227.1.3.1.4 | ColumnpcePcepSessConnectRetry | read-only | current | The number of times that the local PCEP entity has attempted to establish a TCP connection for this session without success. The PCEP entity gives up when this… |
| 1.3.6.1.2.1.227.1.3.1.5 | ColumnpcePcepSessLocalID | read-only | current | The value of the PCEP session ID used by the local PCEP entity in the Open message for this session. If pcePcepSessState is tcpPending, then this is the sessio… |
| 1.3.6.1.2.1.227.1.3.1.6 | ColumnpcePcepSessRemoteID | read-only | current | The value of the PCEP session ID used by the peer in its Open message for this session. If pcePcepSessState is tcpPending or openWait, then this field is not u… |
| 1.3.6.1.2.1.227.1.3.1.7 | ColumnpcePcepSessKeepaliveTimer | read-only | current | The agreed maximum interval at which the local PCEP entity transmits PCEP messages on this PCEP session. Zero means that the local PCEP entity never sends Keep… |
| 1.3.6.1.2.1.227.1.3.1.8 | ColumnpcePcepSessPeerKeepaliveTimer | read-only | current | The agreed maximum interval at which the peer transmits PCEP messages on this PCEP session. Zero means that the peer never sends Keepalives on this session. Th… |
| 1.3.6.1.2.1.227.1.3.1.9 | ColumnpcePcepSessDeadTimer | read-only | current | The DeadTimer interval for this PCEP session. |
| 1.3.6.1.2.1.227.1.3.1.10 | ColumnpcePcepSessPeerDeadTimer | read-only | current | The peer's DeadTimer interval for this PCEP session. If pcePcepSessState is tcpPending or openWait, then this field is not used and MUST be set to zero. |
| 1.3.6.1.2.1.227.1.3.1.11 | ColumnpcePcepSessKAHoldTimeRem | read-only | current | The Keepalive hold time remaining for this session. If pcePcepSessState is tcpPending or openWait, then this field is not used and MUST be set to zero. |
| 1.3.6.1.2.1.227.1.3.1.12 | ColumnpcePcepSessOverloaded | read-only | current | If the local PCEP entity has informed the peer that it is currently overloaded, then this is set to true. Otherwise, it is set to false. |
| 1.3.6.1.2.1.227.1.3.1.13 | ColumnpcePcepSessOverloadTime | read-only | current | The interval of time that is remaining until the local PCEP entity will cease to be overloaded on this session. This field is only used if pcePcepSessOverloade… |
| 1.3.6.1.2.1.227.1.3.1.14 | ColumnpcePcepSessPeerOverloaded | read-only | current | If the peer has informed the local PCEP entity that it is currently overloaded, then this is set to true. Otherwise, it is set to false. |
| 1.3.6.1.2.1.227.1.3.1.15 | ColumnpcePcepSessPeerOverloadTime | read-only | current | The interval of time that is remaining until the peer will cease to be overloaded. If it is not known how long the peer will stay in overloaded state, this fie… |
| 1.3.6.1.2.1.227.1.3.1.16 | ColumnpcePcepSessDiscontinuityTime | read-only | current | The value of sysUpTime at the time that the statistics in this row were last reset. |
| 1.3.6.1.2.1.227.1.3.1.17 | ColumnpcePcepSessAvgRspTime | read-only | current | The average response time for this peer on this session. If an average response time has not been calculated for this peer, then this object has the value zero. |
| 1.3.6.1.2.1.227.1.3.1.18 | ColumnpcePcepSessLWMRspTime | read-only | current | The smallest (low-water mark) response time seen from this peer on this session. If no responses have been received from this peer, then this object has the va… |
| 1.3.6.1.2.1.227.1.3.1.19 | ColumnpcePcepSessHWMRspTime | read-only | current | The greatest (high-water mark) response time seen from this peer on this session. If no responses have been received from this peer, then this object has the v… |
| 1.3.6.1.2.1.227.1.3.1.20 | ColumnpcePcepSessNumPCReqSent | read-only | current | The number of PCReq messages sent on this session. |
| 1.3.6.1.2.1.227.1.3.1.21 | ColumnpcePcepSessNumPCReqRcvd | read-only | current | The number of PCReq messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.22 | ColumnpcePcepSessNumPCRepSent | read-only | current | The number of PCRep messages sent on this session. |
| 1.3.6.1.2.1.227.1.3.1.23 | ColumnpcePcepSessNumPCRepRcvd | read-only | current | The number of PCRep messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.24 | ColumnpcePcepSessNumPCErrSent | read-only | current | The number of PCErr messages sent on this session. |
| 1.3.6.1.2.1.227.1.3.1.25 | ColumnpcePcepSessNumPCErrRcvd | read-only | current | The number of PCErr messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.26 | ColumnpcePcepSessNumPCNtfSent | read-only | current | The number of PCNtf messages sent on this session. |
| 1.3.6.1.2.1.227.1.3.1.27 | ColumnpcePcepSessNumPCNtfRcvd | read-only | current | The number of PCNtf messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.28 | ColumnpcePcepSessNumKeepaliveSent | read-only | current | The number of Keepalive messages sent on this session. |
| 1.3.6.1.2.1.227.1.3.1.29 | ColumnpcePcepSessNumKeepaliveRcvd | read-only | current | The number of Keepalive messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.30 | ColumnpcePcepSessNumUnknownRcvd | read-only | current | The number of unknown messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.31 | ColumnpcePcepSessNumCorruptRcvd | read-only | current | The number of corrupted PCEP messages received on this session. |
| 1.3.6.1.2.1.227.1.3.1.32 | ColumnpcePcepSessNumReqSent | read-only | current | The number of requests sent on this session. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepSessNumPCReqSent… |
| 1.3.6.1.2.1.227.1.3.1.33 | ColumnpcePcepSessNumSvecSent | read-only | current | The number of SVEC objects sent on this session in PCReq messages. An SVEC object represents a set of synchronized requests. |
| 1.3.6.1.2.1.227.1.3.1.34 | ColumnpcePcepSessNumSvecReqSent | read-only | current | The number of requests sent on this session that appeared in one or more SVEC objects. |
| 1.3.6.1.2.1.227.1.3.1.35 | ColumnpcePcepSessNumReqSentPendRep | read-only | current | The number of requests that have been sent on this session for which a response is still pending. |
| 1.3.6.1.2.1.227.1.3.1.36 | ColumnpcePcepSessNumReqSentEroRcvd | read-only | current | The number of successful responses received on this session. A response corresponds 1:1 with an RP object in a PCRep message. A successful response is a respon… |
| 1.3.6.1.2.1.227.1.3.1.37 | ColumnpcePcepSessNumReqSentNoPathRcvd | read-only | current | The number of unsuccessful responses received on this session. A response corresponds 1:1 with an RP object in a PCRep message. An unsuccessful response is a r… |
| 1.3.6.1.2.1.227.1.3.1.38 | ColumnpcePcepSessNumReqSentCancelRcvd | read-only | current | The number of requests sent on this session that were canceled by the peer with a PCNtf message. This might be different than pcePcepSessNumPCNtfRcvd because n… |
| 1.3.6.1.2.1.227.1.3.1.39 | ColumnpcePcepSessNumReqSentErrorRcvd | read-only | current | The number of requests sent on this session that were rejected by the peer with a PCErr message. This might be different than pcePcepSessNumPCErrRcvd because n… |
| 1.3.6.1.2.1.227.1.3.1.40 | ColumnpcePcepSessNumReqSentTimeout | read-only | current | The number of requests sent on this session that have been sent to a peer and have been abandoned because the peer has taken too long to respond to them. |
| 1.3.6.1.2.1.227.1.3.1.41 | ColumnpcePcepSessNumReqSentCancelSent | read-only | current | The number of requests sent on this session that were sent to the peer and explicitly canceled by the local PCEP entity sending a PCNtf. |
| 1.3.6.1.2.1.227.1.3.1.42 | ColumnpcePcepSessNumReqRcvd | read-only | current | The number of requests received on this session. A request corresponds 1:1 with an RP object in a PCReq message. This might be greater than pcePcepSessNumPCReq… |
| 1.3.6.1.2.1.227.1.3.1.43 | ColumnpcePcepSessNumSvecRcvd | read-only | current | The number of SVEC objects received on this session in PCReq messages. An SVEC object represents a set of synchronized requests. |
| 1.3.6.1.2.1.227.1.3.1.44 | ColumnpcePcepSessNumSvecReqRcvd | read-only | current | The number of requests received on this session that appeared in one or more SVEC objects. |
| 1.3.6.1.2.1.227.1.3.1.45 | ColumnpcePcepSessNumReqRcvdPendRep | read-only | current | The number of requests that have been received on this session for which a response is still pending. |
| 1.3.6.1.2.1.227.1.3.1.46 | ColumnpcePcepSessNumReqRcvdEroSent | read-only | current | The number of successful responses sent on this session. A response corresponds 1:1 with an RP object in a PCRep message. A successful response is a response f… |
| 1.3.6.1.2.1.227.1.3.1.47 | ColumnpcePcepSessNumReqRcvdNoPathSent | read-only | current | The number of unsuccessful responses sent on this session. A response corresponds 1:1 with an RP object in a PCRep message. An unsuccessful response is a respo… |
| 1.3.6.1.2.1.227.1.3.1.48 | ColumnpcePcepSessNumReqRcvdCancelSent | read-only | current | The number of requests received on this session that were canceled by the local PCEP entity sending a PCNtf message. This might be different than pcePcepSessNu… |
| 1.3.6.1.2.1.227.1.3.1.49 | ColumnpcePcepSessNumReqRcvdErrorSent | read-only | current | The number of requests received on this session that were rejected by the local PCEP entity sending a PCErr message. This might be different than pcePcepSessNu… |
| 1.3.6.1.2.1.227.1.3.1.50 | ColumnpcePcepSessNumReqRcvdCancelRcvd | read-only | current | The number of requests that were received on this session and explicitly canceled by the peer sending a PCNtf. |
| 1.3.6.1.2.1.227.1.3.1.51 | ColumnpcePcepSessNumRepRcvdUnknown | read-only | current | The number of responses to unknown requests received on this session. A response to an unknown request is a response whose RP object does not contain the reque… |
| 1.3.6.1.2.1.227.1.3.1.52 | ColumnpcePcepSessNumReqRcvdUnknown | read-only | current | The number of unknown requests that have been received on this session. An unknown request is a request whose RP object contains a request ID of zero. |
| 1.3.6.1.2.1.227.1.4 | ScalarpcePcepNotificationsMaxRate | read-write | current | This variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these n… |
| 1.3.6.1.2.1.227.2 | NodepcePcepConformance | |||
| 1.3.6.1.2.1.227.2.1 | NodepcePcepCompliances | |||
| 1.3.6.1.2.1.227.2.1.1 | CompliancepcePcepModuleReadOnlyCompliance | current | The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | |
| 1.3.6.1.2.1.227.2.2 | NodepcePcepGroups | |||
| 1.3.6.1.2.1.227.2.2.1 | GrouppcePcepGeneralGroup | current | Objects that apply to all PCEP MIB module implementations. | |
| 1.3.6.1.2.1.227.2.2.2 | GrouppcePcepNotificationsGroup | current | The notifications for a PCEP MIB module implementation. |