PDN-ADSL-SELT-MIB
35 objects
This MIB module defines a portion of the management information base (MIB) for managing configuration and monitoring results of SELT (Single Ended Line Test) tests over ADSL interfaces. At the time this MIB was defined, the IETF ADSL MIB Working does not have any work on the 'standard' MIBs planned and/or has not produced a schedule to address G.SELT needs. As a result, these objects may be a `temporary' solution until MIBs/Objects are defined meet the needs of ADSL SELT testing. ===================================================================== == == == Copyright (C) 2005 Paradyne Corporation. == == == =====================================================================
Imported Objects
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-interfaces |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.31 | IdentitypdnAdslSeltMIB | This MIB module defines a portion of the management information base (MIB) for managing configuration and monitoring results of SELT (Single Ended Line Test) t… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.31.0 | NodepdnAdslSeltNotifications | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.1 | NodepdnAdslSeltObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.1 | ScalarpdnAdslSeltWireSize | read-write | current | This object permits the selection of the metric unit to be used when reporting SELT test results. (i.e for AWG results are in feet and for metric/metricJapan r… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2 | TablepdnAdslSeltTable | not-accessible | current | This table allows initiation/termination of SELT Tests. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1 | RowpdnAdslSeltEntry | not-accessible | current | Each entry represents an instance of a SELT test currently running or ever run (since last system reset) on an ADSL interface. There should be entries in this … |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.1 | ColumnpdnAdslSeltType | not-accessible | current | This object is used to specify the SELT test type that will be initiated. If a SELT Test is already running on the ADSL interface, writing to this object is pr… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.2 | ColumnpdnAdslSeltCmd | read-write | current | This object corresponds to the list of test operations that can be performed. The possible values are noOp(1), start(2), stop(3), or clearResults(4). Reading t… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.3 | ColumnpdnAdslSeltStatus | read-only | current | This object provides status about any SELT test running or ever run (since last reset) on an ADSL interface. This object can be read by NMS managers to determi… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.4 | ColumnpdnAdslSeltDuration | read-write | current | This object provides the approximate time in Seconds that the SELT test measurement will take. This object should return 0 if no test is actively running on th… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.5 | ColumnpdnAdslSeltTimeLeft | read-only | current | This object provides the approximate time left in Seconds for the test running on this ADSL interface. This object should return 0 if no test is actively runni… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.3 | TablepdnAdslSeltLcTable | not-accessible | current | This table post results for loop characterization tests completed. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1 | RowpdnAdslSeltLcEntry | not-accessible | current | Each entry represents the results of a loop characterization test performed over an ADSL interface. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.1 | ColumnpdnAdslSeltLcSegmentIndex | not-accessible | current | This object indicates the index of the segment being reported. From no segments to a possible of 10 segments could be identified in the loop topology. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.2 | ColumnpdnAdslSeltLcSegmentLength | read-only | current | This object indicates an estimate of the segment Length being reported |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.3 | ColumnpdnAdslSeltLcSegmentGauge | read-only | current | This object indicates the estimated Gauge of the segment being reported. The gauge reported back is based on the pdnAdslSeltWireSizeWireSize configuration para… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.3.1.4 | ColumnpdnAdslSeltLcSegmentType | read-only | current | This object indicates the segment type being reported. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.4 | TablepdnAdslSeltLnfTable | not-accessible | current | This table post results for loop noise floor tests completed. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1 | RowpdnAdslSeltLnfEntry | not-accessible | current | Each entry represents the results of a Loop Noise Floor test performed over an ADSL interface. |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.1 | ColumnpdnAdslSeltLnfSubCarrierIndex | not-accessible | current | Identifies a row in the table based on a subcarrier. The subcarrier index ranges from 0 to NSCus-1 (NSC is Number of Subcarriers) as specified in G.997.1 where… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.2 | ColumnpdnAdslSeltLnfPeakPsd | read-only | current | This object indicates the peak Psd of the tone indicated by the sub-carrier index. The value returned by the agent for this object is expressed in units of 1/2… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.3 | ColumnpdnAdslSeltLnfTotalPsd | read-only | current | This object indicates the total Psd of the tone indicated by the sub-carrier index. The value returned by the agent for this object is expressed in units of 1/… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.1.4.1.4 | ColumnpdnAdslSeltLnfSignalPsd | read-only | current | This object indicates the signal Psd of the tone indicated by the sub-carrier index. The value returned by the agent for this object is expressed in units of 1… |
| 1.3.6.1.4.1.1795.2.24.2.6.31.2 | NodepdnAdslSeltAFNs | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.3 | NodepdnAdslSeltConformance | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.1 | NodepdnAdslSeltCompliances | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.1.1 | CompliancepdnAdslSeltMIBCompliance | current | The compliance statement for the entities which implement the pdnAdslSeltMIB. | |
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2 | NodepdnAdslSeltGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2.1 | NodepdnAdslSeltObjGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2.1.1 | GrouppdnAdslSeltGroup | current | General configuration of SELT tests. | |
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2.1.2 | GrouppdnAdslSeltLcGroup | current | Objects related to results posted for Loop Characterization Test. | |
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2.1.3 | GrouppdnAdslSeltLnfGroup | current | Objects related to results posted for Loop Signal Floor Test. | |
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2.2 | NodepdnAdslSeltAfnGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.31.3.2.3 | NodepdnAdslSeltNtfyGroups |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PdnSeltTypes | INTEGER { loopCharacterization (1), loopNoiseFloor (2) } | current | This textual convention defines the SELT test types available for configuration. |