PDN-CONFIG-MIB
39 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.7.1 | NodedevConfigArea | |||
| 1.3.6.1.4.1.1795.2.24.2.7.1.1 | ScalardevConfigAreaCopy | read-write | mandatory | This object is used to copy the entire contents of one configuration area into another configuration area. The supported number of factory configuration areas … |
| 1.3.6.1.4.1.1795.2.24.2.7.2 | NodedevConfigTestTimer | |||
| 1.3.6.1.4.1.1795.2.24.2.7.2.1 | ScalardevConfigTestTimeout | read-write | mandatory | This object specifies whether tests are to be terminated after a defined duration. If the value is enable(2), the duration is defined by devConfigTestDuration. |
| 1.3.6.1.4.1.1795.2.24.2.7.2.2 | ScalardevConfigTestDuration | read-write | mandatory | This object specifies the duration that a test will be allowed to run before it is automatically terminated. Tests will only be terminated if devConfigTestTime… |
| 1.3.6.1.4.1.1795.2.24.2.7.3 | NodedevConfigClockSrc | |||
| 1.3.6.1.4.1.1795.2.24.2.7.3.1 | TabledevConfigClockSrcTable | not-accessible | mandatory | The clock source table. |
| 1.3.6.1.4.1.1795.2.24.2.7.3.1.1 | RowdevConfigClockSrcEntry | not-accessible | mandatory | An entry in the clock source table. |
| 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.1 | ColumndevCfgClkWhichSrc | read-only | mandatory | The clock source to which this entry is applicable. |
| 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.2 | ColumndevCfgClkSource | read-write | mandatory | This object is used to select the source for the master clock for the device. The source selected provides synchronization for all the timing within the device… |
| 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3 | ColumndevCfgClkIfIndex | read-write | mandatory | This object is used to select the interface to be used as the source for the master clock for the device, if devCfgClkSource is set to interface(3). The interf… |
| 1.3.6.1.4.1.1795.2.24.2.7.3.1.1.4 | ColumndevCfgClkRate | read-write | mandatory | This object is used to specify the clock signal rate associated with the external source selected by the devCfgClkSource object. |
| 1.3.6.1.4.1.1795.2.24.2.7.4 | NodedevConfigTrap | |||
| 1.3.6.1.4.1.1795.2.24.2.7.4.1 | ScalardevConfigTrapEnable | read-write | mandatory | Which trap types will be sent by the entity. This object is a bit map represented as a sum, therefore, multiple trap types can be enabled simultaneously. This … |
| 1.3.6.1.4.1.1795.2.24.2.7.4.2 | ScalarcCNTrapEnable | read-write | mandatory | This object is used to enable or disable configuration change trap. It is a bit sequence sum with only accepted values 1 or 2. Setting the bit sequence to 2 wo… |
| 1.3.6.1.4.1.1795.2.24.2.7.4.7 | NodecCN | This trap signifies a Configuration change or software upgrade. This trap is of 'warning' class | ||
| 1.3.6.1.4.1.1795.2.24.2.7.5 | NodedevConfigAlarm | |||
| 1.3.6.1.4.1.1795.2.24.2.7.5.6 | ScalardevConfigAlarmRelayCutoff | read-write | mandatory | Writing off(2) to this object will turn off the System Alarm Relay. Reading this object will always return noOp(1). |
| 1.3.6.1.4.1.1795.2.24.2.7.6 | NodedevConfigCardType | |||
| 1.3.6.1.4.1.1795.2.24.2.7.6.7 | TabledevConfigCardTypeTable | not-accessible | mandatory | The Paradyne Card Type Table. |
| 1.3.6.1.4.1.1795.2.24.2.7.6.7.1 | RowdevConfigCardTypeEntry | not-accessible | mandatory | An entry in the Paradyne Card Type Table. |
| 1.3.6.1.4.1.1795.2.24.2.7.6.7.1.1 | ColumndevCfgCardSlot | read-only | mandatory | The slot number which this card occupies in the chassis. |
| 1.3.6.1.4.1.1795.2.24.2.7.6.7.1.2 | ColumndevCfgCardConfig | read-only | mandatory | The type of card which has been configured for this slot. |
| 1.3.6.1.4.1.1795.2.24.2.7.6.7.1.3 | ColumndevCfgCardActual | read-only | mandatory | The type of card which is present in this slot. |
| 1.3.6.1.4.1.1795.2.24.2.7.6.7.1.4 | ColumndevCfgCardAction | read-write | mandatory | Writing accept(2) to this object changes the configured card type to match the type of card currently present in the slot. Reading this object always returns n… |
| 1.3.6.1.4.1.1795.2.24.2.7.7 | NodedevConfigNetSync | |||
| 1.3.6.1.4.1.1795.2.24.2.7.7.1 | ScalardevConfigNetSyncRole | read-write | mandatory | Network Time Synchronization role item for a device in the network. none - Device will ignore network time synchronization messages. tributary - Update the net… |
| 1.3.6.1.4.1.1795.2.24.2.7.8 | NodedevConfigTime | |||
| 1.3.6.1.4.1.1795.2.24.2.7.8.1 | ScalardevConfigTimeOfDay | read-write | mandatory | This is standard definition of Device Time of Day (DateAndTime) SYNTAX. The only difference is that our group is defining timezone filed (8) optional. Display … |
| 1.3.6.1.4.1.1795.2.24.2.7.9 | NodedevConfigChangeKeys | |||
| 1.3.6.1.4.1.1795.2.24.2.7.9.1 | TabledevConfigChangeKeysTable | not-accessible | mandatory | The Paradyne Configuration Change Key Table. This table is in place to allow a Network Manager to know when the configuration on the device changes. Configurat… |
| 1.3.6.1.4.1.1795.2.24.2.7.9.1.1 | RowdevConfigChangeKeysEntry | not-accessible | mandatory | An entry in the Paradyne Configuration Change Key Table. |
| 1.3.6.1.4.1.1795.2.24.2.7.9.1.1.1 | ColumndevConfigChangeKeysDbType | read-only | mandatory | The type of database that is being keyed. If a specific type is not supported by the device, noSuchName should be returned. |
| 1.3.6.1.4.1.1795.2.24.2.7.9.1.1.2 | ColumndevConfigChangeKeysDbKey | read-only | mandatory | A unique value that will change each time the database is altered. Effort should be made to increase the number of times the database can change without seeing… |
| 1.3.6.1.4.1.1795.2.24.2.7.10 | NodedevConfiguration | |||
| 1.3.6.1.4.1.1795.2.24.2.7.10.1 | ScalardevConfigComDiscTime | read-write | mandatory | This object is used to specify how long to wait before disconnecting. Inactivity is defined as no keyboard activity within a given period of time. The time is … |
| 1.3.6.1.4.1.1795.2.24.2.7.10.2 | ScalardevConfigPortNumDisplayFormat | read-write | mandatory | This object is used to set display format for the port numbers. The default is unit/port number. sle(1) - this method is to use Single Logical Entity interface… |
| 1.3.6.1.4.1.1795.2.24.2.7.10.3 | ScalardevConfigDateDisplayFormat | read-write | mandatory | This object is used to specify which format will date be displayed in.The default is 'mmddyy' |
| 1.3.6.1.4.1.1795.2.24.2.7.10.4 | ScalardevAcceptRemoteResetFrame | read-write | mandatory | This object is used to enable/disable acceptance of remote reset frame which would result in hardware reset. The default setting is disabled. |