PDN-CONTROL-MIB
115 objects
This MIB Module allow a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and configuration files on devices.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-common |
| PDN-TC | SwitchState |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.10 | IdentitypdnControl | This MIB Module allow a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and configu… | ||
| 1.3.6.1.4.1.1795.2.24.2.10.0 | IdentitypdnControlMIBTrapsV2 | current | The traps for the device control MIB. | |
| 1.3.6.1.4.1.1795.2.24.2.10.0.1 | NotificationdevFileXferEvent | current | This trap is to communicate a couple of things about the completion of a file transfer. devFileXferStatus - Did it complete successfully or not. devFileXferErr… | |
| 1.3.6.1.4.1.1795.2.24.2.10.0.2 | NotificationdevAutoBackupFailEvent | current | This trap indicates a condition exists, which prevents automated backup of a device's configuration to the Management Controller Card (MCC) Flash File System a… | |
| 1.3.6.1.4.1.1795.2.24.2.10.0.3 | NotificationdevConfigRestoreFailEvent | current | This trap is sent by a device to indicate that an incorrect or incompatible configuration file is being downloaded to the device from the MCC Flash File System. | |
| 1.3.6.1.4.1.1795.2.24.2.10.0.4 | NotificationdevAutoFwEvent | current | This trap is to communicate the result of the Auto Firmware Download. The variable binding for this trap would be the devAutoFwStatus of pdnAutoFwGroup. The ex… | |
| 1.3.6.1.4.1.1795.2.24.2.10.0.5 | NotificationpdnDevFileXferEvent | current | This trap is to communicate a couple of things about the completion of a file transfer. pdnDevFileXferStatus - Did it complete successfully or not. pdnDevFileX… | |
| 1.3.6.1.4.1.1795.2.24.2.10.1 | ScalardevHWControlReset | read-write | current | Writing the value reset(2) to this object initiates a Hardware power-on reset of the device. The value read from this object is noOp(1). |
| 1.3.6.1.4.1.1795.2.24.2.10.2 | TabledevControlTestTable | not-accessible | current | A list of Device tests that may be run. |
| 1.3.6.1.4.1.1795.2.24.2.10.2.1 | RowdevControlTestEntry | not-accessible | current | The device Test Table. |
| 1.3.6.1.4.1.1795.2.24.2.10.2.1.1 | ColumndevControlTest | read-only | current | An index into the test table that indicates which test the row involves. |
| 1.3.6.1.4.1.1795.2.24.2.10.2.1.2 | ColumndevControlTestStatus | read-only | current | The test status on the device. This object indicates whether the indexed test is currently active(1) or inactive(2). |
| 1.3.6.1.4.1.1795.2.24.2.10.2.1.3 | ColumndevControlTestCmd | read-create | current | Used to start or stop the indexed test. When read, the value returned will be the next logical command. |
| 1.3.6.1.4.1.1795.2.24.2.10.3 | TabledevControlDownLoadTable | not-accessible | current | A list of the current Download Releases and their associated status. Each Download Release will be indexed by a number from 1 to N. The user will be able to vi… |
| 1.3.6.1.4.1.1795.2.24.2.10.3.1 | RowdevControlDownLoadEntry | not-accessible | current | The Device DownLoad Release entry. |
| 1.3.6.1.4.1.1795.2.24.2.10.3.1.1 | ColumndevControlDownLoadIndex | read-only | current | This object is used to index the download table (range 1 to N). |
| 1.3.6.1.4.1.1795.2.24.2.10.3.1.2 | ColumndevControlDownLoadRelease | read-only | current | This object indicates the Software Release for this Download. If the Software Download is Operational Status is invalid, the Software Revision Number will be b… |
| 1.3.6.1.4.1.1795.2.24.2.10.3.1.3 | ColumndevControlDownLoadOperStatus | read-only | current | This object indicates whether or not the indexed download entry contains a valid(1) or invalid(2) download. |
| 1.3.6.1.4.1.1795.2.24.2.10.3.1.4 | ColumndevControlDownLoadAdminStatus | read-create | current | This object indicates whether or not the indexed download entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause th… |
| 1.3.6.1.4.1.1795.2.24.2.10.4 | NodedevControlRMON | |||
| 1.3.6.1.4.1.1795.2.24.2.10.4.1 | ScalardevControlRMONAdminStatus | read-write | current | The desired state of the RMON process. If set to enabled(1), the RMON process will perform the collection tasks it is set up to do. If it is disabled(2), RMON … |
| 1.3.6.1.4.1.1795.2.24.2.10.5 | TabledevSNSwitchFirmwareTable | not-accessible | current | A list of objects needed to switch bank and reset the Service Node (ASN). |
| 1.3.6.1.4.1.1795.2.24.2.10.5.1 | RowdevSNSwitchFirmwareEntry | not-accessible | current | The Service Node Switch Firmware table. |
| 1.3.6.1.4.1.1795.2.24.2.10.5.1.1 | ColumndevSNSwitchFirmwareIndex | read-only | current | An index into the Service Node switch firmware table that indicates which interface the row involves. This index corresponds to the entityPhysicalIndex of the … |
| 1.3.6.1.4.1.1795.2.24.2.10.5.1.2 | ColumndevSNSwitchFirmwareBank | read-create | current | Writing the value switch(2) to this object will switch the banks to change the firmware being used on the service node. The firmware from the stand by (not act… |
| 1.3.6.1.4.1.1795.2.24.2.10.6 | NodedevControlFTP | |||
| 1.3.6.1.4.1.1795.2.24.2.10.6.1 | ScalardevControlFTPRate | read-write | current | FTP max transfer rate in (Kbps) |
| 1.3.6.1.4.1.1795.2.24.2.10.7 | NodedevFileXferMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.10.7.1 | TabledevFileXferConfigTable | not-accessible | current | The Paradyne FileXfer Client Config Table. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1 | RowdevFileXferConfigEntry | not-accessible | current | Use of the File Tranfer MIB could be used with other MIBS in the following manner: a) Use another MIB/means to verify available space /make room for a file to … |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.1 | ColumndevFileXferFileName | read-create | current | This object contains the name of the filetransfer file. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.2 | ColumndevFileXferCopyProtocol | read-create | current | The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transf… |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.3 | ColumndevFileXferFileType | read-create | current | Specifies the type of file your want to transfer. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.4 | ColumndevFileXferServerIpAddress | read-create | current | This object contains the file transfer server's IP address. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.5 | ColumndevFileXferUserName | read-create | current | This object contains the username if a username is needed to login to the server. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.6 | ColumndevFileXferUserPassword | read-create | current | This object contains the password if a password is needed to login to the server. This object will return null on a read operation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.7 | ColumndevFileXferOperation | read-create | current | This object contains the operation the file transfer wants to perform. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.8 | ColumndevFileXferPktsSent | read-only | current | This object contains the the number of packets sent to the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.9 | ColumndevFileXferPktsRecv | read-only | current | This object contains the the number of packets received from the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.10 | ColumndevFileXferOctetsSent | read-only | current | This object contains the the number of octets sent to the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.11 | ColumndevFileXferOctetsRecv | read-only | current | This object contains the the number of octets received from the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.12 | ColumndevFileXferOwnerString | read-create | current | The entity which currently has the 'ownership' required to invoke the operation on this index. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.13 | ColumndevFileXferStatus | read-only | current | This object contains the status of the file transfer. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.14 | ColumndevFileXferErrorStatus | read-only | current | This object contains the reason code of the failure determined in devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer t… |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.15 | ColumndevFileXferSendEvent | read-create | current | This object indicates whether or not to send the devFileXferEvent event trap . |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.16 | ColumndevFileXferRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.17 | ColumndevFileXferXferTime | read-only | current | This object indicates the elapsed time (in hundredths of a second) of the file transfer. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2 | TablepdnDevFileXferTable | not-accessible | current | The Paradyne FileXfer Image Client Config Table accessed by session id. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1 | RowpdnDevFileXferEntry | not-accessible | current | Use of the File Tranfer MIB could be used with other MIBS in the following manner: a) Use another MIB/means to verify available space /make room for a file to … |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.1 | ColumnpdnDevFileXferSessionID | not-accessible | current | This object is the session id. This object is used by FileXfer Table to identify the row of this table. When creating the new row in the table the value of thi… |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.2 | ColumnpdnDevFileXferifIndex | read-create | current | This object specifies the interface number that corresponds to RFC1213. It this object is not used the value of this object should be zero. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.3 | ColumnpdnDevFileXferFileName | read-create | current | This object contains the name of the filetransfer file. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.4 | ColumnpdnDevFileXferCopyProtocol | read-create | current | The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transf… |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.5 | ColumnpdnDevFileXferFileType | read-create | current | Specifies the type of file your want to transfer. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.6 | ColumnpdnDevFileXferServerIpAddress | read-create | current | This object contains the file transfer server's IP address. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.7 | ColumnpdnDevFileXferUserName | read-create | current | This object contains the username if a username is needed to login to the server. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.8 | ColumnpdnDevFileXferUserPassword | read-create | current | This object contains the password if a password is needed to login to the server. This object will return null on a read operation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.9 | ColumnpdnDevFileXferUserAccount | read-create | current | This object contains the name of the the user account information that is stored on ftp server. Server would contain user name and password under this account … |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.10 | ColumnpdnDevFileXferOperation | read-create | current | This object contains the operation the file transfer wants to perform. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.11 | ColumnpdnDevFileXferPktsSent | read-only | current | This object contains the the number of packets sent to the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.12 | ColumnpdnDevFileXferPktsRecv | read-only | current | This object contains the the number of packets received from the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.13 | ColumnpdnDevFileXferOctetsSent | read-only | current | This object contains the the number of octets sent to the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.14 | ColumnpdnDevFileXferOctetsRecv | read-only | current | This object contains the the number of octets received from the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.15 | ColumnpdnDevFileXferOwnerString | read-create | current | The entity which currently has the 'ownership' required to invoke the operation on this index. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.16 | ColumnpdnDevFileXferStatus | read-only | current | This object contains the status of the file transfer. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.17 | ColumnpdnDevFileXferApply | read-create | current | This object is configured to specify if the firmware download will be applied immediatley after file transfer or not. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.18 | ColumnpdnDevFileXferErrorStatus | read-only | current | This object contains the reason code of the failure determined in devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer t… |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.19 | ColumnpdnDevFileXferSendEvent | read-create | current | This object indicates whether or not to send the pdnDevFileXferEvent event trap . |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.20 | ColumnpdnDevFileXferXferTime | read-only | current | This object indicates the elapsed time (in hundredths of a second) of the file transfer. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.2.1.21 | ColumnpdnDevFileXferRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. |
| 1.3.6.1.4.1.1795.2.24.2.10.7.3 | ScalarpdnDevFileXferSessionIDNext | read-only | current | This object contains an appropriate value to be used for pdnDevFileXferTable. The value of 0 indicates that no unassigned entries are available. To obtain pdnD… |
| 1.3.6.1.4.1.1795.2.24.2.10.8 | NodedevFileXferMIBTraps | |||
| 1.3.6.1.4.1.1795.2.24.2.10.9 | NodedevFirmwareControlMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.10.9.1 | TabledevFirmwareControlTable | not-accessible | current | A list of the current Firmware Releases and their associated status. Each Firmware Release will be indexed by a number from 1 to N. The user will be able to vi… |
| 1.3.6.1.4.1.1795.2.24.2.10.9.1.1 | RowdevFirmwareControlEntry | not-accessible | current | The Device Firmware Release entry. |
| 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.1 | ColumndevFirmwareControlIndex | read-only | current | This object is used to index the Firmware table (range 1 to N). |
| 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.2 | ColumndevFirmwareControlRelease | read-only | current | This object indicates the Software Release for this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be b… |
| 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.3 | ColumndevFirmwareControlOperStatus | read-only | current | This object indicates whether or not the indexed Firmware entry contains a valid(1) or invalid(2) Firmware. |
| 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.4 | ColumndevFirmwareControlAdminStatus | read-create | current | This object indicates whether or not the indexed Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause th… |
| 1.3.6.1.4.1.1795.2.24.2.10.10 | NodepdnConfigChangeMgmt | |||
| 1.3.6.1.4.1.1795.2.24.2.10.10.1 | NodepdnCCMAutoBackup | |||
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.1 | ScalarpdnCCMAutoBackupType | read-write | current | This object indicates whether automatic backup of device configuration files to the MCC Flash File System is disabled, performed according to a fixed schedule,… |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.2 | ScalarpdnCCMAutoBackupFixedDay | read-write | current | This object indicates the days of the week on which fixed schedule automatic backups occur. If all bits are set, backups occur daily. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.3 | ScalarpdnCCMAutoBackupFixedTime | read-write | current | This object indicates the time of day, in minutes past midnight, at which automatic backups on a fixed schedule occur. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.4 | ScalarpdnCCMAutoBackupDynamicTime | read-write | current | This object indicates the interval (in minutes) after the most recent configuration change, when a card's configuration will be backed up to the MCC Flash File… |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.5 | ScalarpdnCCMAutoBackupAppendTimeStampToFilename | read-create | current | This object indicates that the time is to be appended to filename of the file stored to upon automated backup. The defualt value of this object is disabled(2). |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.6 | ScalarpdnCCMAutoBackupFilename | read-create | current | This is file name that the configuration will be stored to upon automated backup. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.7 | ScalarpdnCCMAutoBackupServerIpAddress | read-create | current | This object is to configure Ip address of the server used to perform autobackup. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.8 | ScalarpdnCCMAutoBackupUserName | read-create | current | This object user name used to start ftp session for automatic backup. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.9 | ScalarpdnCCMAutoBackupUserPassword | read-create | current | This object user password that is paired with user name for ftp server login. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.10 | ScalarpdnCCMAutoBackupUserAccount | read-create | current | This object is user account name that ftp server contains. Under this name ftp server stores UserName and UserPassword info. If this object is null(not configu… |
| 1.3.6.1.4.1.1795.2.24.2.10.10.1.11 | ScalarpdnCCMAutoBackupCopyProtocol | read-create | current | The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transf… |
| 1.3.6.1.4.1.1795.2.24.2.10.10.2 | ScalarpdnCCMAutoRestore | read-write | current | This object specifies whether the MCC Flash File System will restore stored configuration files to newly inserted cards in the DSLAM. |
| 1.3.6.1.4.1.1795.2.24.2.10.10.3 | ScalarpdnCCMResyncOperation | read-write | current | This object contains the operation performed when ResyncState is enabled. The value 'get' retrieves configuration files from the MCC FFS to all the devices. Th… |
| 1.3.6.1.4.1.1795.2.24.2.10.10.4 | ScalarpdnCCMOperation | read-write | current | This object contains configuration options for operations performed to manage object. SAVE(3) operation is interpreted as copying running configuration to data… |
| 1.3.6.1.4.1.1795.2.24.2.10.11 | NodepdnControlMIBGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.10.11.1 | GroupdevResetGroup | current | Objects to initiate resets of a device | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.2 | GroupdevControlTestGroup | current | Objects to control device level tests | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.3 | GroupdevControlDownloadGroup | current | A list of the current Download Releases and their associated status. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.4 | GroupdevControlRMONGroup | current | The desired state of the RMON process. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.5 | GroupdevSNSwitchFirmwareGroup | current | Objects needed to switch bank and reset the Service Node. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.6 | GroupdevControlFTPGroup | current | FTP Max Transfer Rate | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.7 | GroupdevFileXferMIBGroup | current | File Transfer Client Config Objects | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.8 | GroupdevFirmwareControlGroup | current | Current Firmware Releases and associated status. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.9 | GroupdevConfigChangeMgmtGroup | current | Object group used to manage automatic backup and restore of device configuration files. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.10 | GroupdevFileXferEventGroup | current | Notifications associated with devFileXferConfigGroup | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.11 | GroupdevCCMEventGroup | current | Notifications indicating a failure occuring during automated backup or restore of device configuration files. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.12 | GrouppdnAutoFwGroup | current | Auto Firmware Download Feature and associated status. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.13 | GroupdevAutoFwEventGroup | current | Notifications indicating the result of the Auto Firmware Download. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.14 | GrouppdnDevFileXferMIBGroup | current | File Transfer Client Objects | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.15 | GroupdevNextTableObjectMIBGroup | current | Group of singular objects that decided next available object for mib tables. | |
| 1.3.6.1.4.1.1795.2.24.2.10.11.16 | GrouppdnDevFileXferEventGroup | current | Notifications associated with pdnDevFileXferConfigGroup | |
| 1.3.6.1.4.1.1795.2.24.2.10.12 | NodepdnAutoFw | |||
| 1.3.6.1.4.1.1795.2.24.2.10.12.1 | ScalardevIsAutoFwEnabled | read-write | current | Writing the value enabled(1) or disabled(2) to this object enables or disables the Automatic Firmware download feature. |
| 1.3.6.1.4.1.1795.2.24.2.10.12.2 | ScalardevAutoFwStatus | read-only | current | This indicates the Status of Auto Firmware Download where each field is separated by a semi-colon. The get function will return the status of the latest card d… |