PDN-DIAGNOSTICS-MIB
98 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.16.1 | NodediagTestMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.16.1.1 | NodediagIfTest | |||
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1 | TableifLoopbackTestTable | not-accessible | mandatory | This table contains input and results of a packet loopback test. This table is indexed by ifIndex. This is a interface related test. There can be only one test… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1 | RowifLoopbackTestEntry | not-accessible | mandatory | An entry containing objects for test input and result for packet loopback test |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.1 | ColumnloopbackTestInputNumCycles | read-write | mandatory | This object corresponds the number of cycles the test to be run for. One cycle corresponds to a 15 second interval. The default value for this object is 40. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.2 | ColumnloopbackTestResultsPktsSent | read-only | mandatory | This object corresponds to the number of packets sent |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.3 | ColumnloopbackTestResultsPktsRcvdOK | read-only | mandatory | This object corresponds to the number of packets which were received without any error |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.4 | ColumnloopbackTestResultsPktsRcvdErr | read-only | mandatory | This object corresponds to the number of packets which were received with errors |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.5 | ColumnloopbackTestResultsPktsNotRcvd | read-only | mandatory | This object corresponds to the number of packets which were sent but not received |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.6 | ColumnloopbackTestResultsPktErrorRate | read-only | mandatory | Reflects the error rate of the loopback test. this string will represent a floating point number of the form [ErrRate][eE][+-][ErrRateBase] where ErrRate and E… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.7 | ColumnloopbackTestResultsErrSecs | read-only | mandatory | This object corresponds to the number of errored seconds |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.8 | ColumnloopbackTestResultsSvrErrSecs | read-only | mandatory | This object corresponds to the number of severely errored seconds |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.9 | ColumnloopbackTestResultsElpTime | read-only | mandatory | This object corresponds to the number of seconds elapsed since the start of the test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2 | TableifBERTObjectsTable | not-accessible | mandatory | This table contains the objects for Bit Error Rate Test. This table is indexed by ifIndex. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1 | RowifBERTObjectsEntry | not-accessible | mandatory | An Entry containing objects of BERT. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.1 | ColumnifBERTTestDuration | read-write | mandatory | This object represents the test duration in seconds. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.2 | ColumnifBERTElapsedTime | read-only | mandatory | This object represents the elapsed time in seconds. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.3 | ColumnifBERTDownSyncUP | read-only | mandatory | This object indicates whether Downstream sync is enabled . |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.4 | ColumnifBERTUpSyncUP | read-only | mandatory | This object indicates whether upstream sync is enabled. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.5 | ColumnifBERTSegmentsSent | read-only | mandatory | This object represents the number of segments sent during the test |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.6 | ColumnifBERTDownMBitsRcvd | read-only | mandatory | This represents the number of million bits rcvd downstream. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.7 | ColumnifBERTUpMBitsRcvd | read-only | mandatory | This represents the number of million bits rcvd upstream. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.8 | ColumnifBERTDownBitErrDetected | read-only | mandatory | This represents the number of bit errors detected downstream. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.9 | ColumnifBERTUpBitErrDetected | read-only | mandatory | This represents the number of bit errors detected upstream. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.10 | ColumnifBERTDownBitErrRate | read-only | mandatory | This string will represent a floating point number of the form [Er rRate] [eE] [+-] [ErrRatebase] where ErrTare and errRateBase are integers. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.11 | ColumnifBERTUpBitErrRate | read-only | mandatory | This object reflects the error rate of BERT in Upstream direction. This string will represent a floating point number of the form [ErrRate] [eE] [+-] [ErrRateb… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.12 | ColumnifBERTDownErroredSecs | read-only | mandatory | This represents number of errored seconds downstream. Errored second is a second in which there is at least 1 block error. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.13 | ColumnifBERTUpErroredSecs | read-only | mandatory | This represents number of errored seconds upstream. Errored second is a second in which there is at least 1 block error. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.14 | ColumnifBERTDownLineRate | read-only | mandatory | This represents the downstream line rate in KBPS |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.15 | ColumnifBERTUpLineRate | read-only | mandatory | This represents the Upstream line rate in KBPS |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.16 | ColumnifBERTDownMargin | read-only | mandatory | This represents the Downstream margin in decibels (DB). |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.17 | ColumnifBERTUpMargin | read-only | mandatory | This represents the upstream margin in decibels (DB). |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3 | TableifBLERTObjectsTable | not-accessible | mandatory | This table contains the objects for Block Error Rate Test (BLERT). This table is indexed by ifIndex. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1 | RowifBLERTObjectsEntry | not-accessible | mandatory | An Entry containing objects of BLERT. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.1 | ColumnifBLERTTestDuration | read-write | mandatory | This object represents the test duration in seconds. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.2 | ColumnifBLERTElapsedTime | read-only | mandatory | This object represents the elapsed time in seconds since the test started. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.3 | ColumnifBLERTTxSeqCount | read-only | mandatory | This object indicates the next Tx sequence. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.4 | ColumnifBLERTRxSeqCount | read-only | mandatory | This object indicates the next Rx sequence. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.5 | ColumnifBLERTRxGoodFrames | read-only | mandatory | This object indicates the number of good frames received. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.6 | ColumnifBLERTTxGoodFrames | read-only | mandatory | This object indicates the number of good frames transmitted. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.7 | ColumnifBLERTRxBadFrames | read-only | mandatory | This object indicates the number of bad frames received. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.8 | ColumnifBLERTTxBadFrames | read-only | mandatory | This object indicates the number of bad frames transmitted. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.9 | ColumnifBLERTDnLineRate | read-only | mandatory | This object indicates the downstream line rate. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.10 | ColumnifBLERTUpLineRate | read-only | mandatory | This object indicates the upstream line rate. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2 | NodediagApplTest | |||
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.1 | ScalarapplMaxNumberOfTests | read-only | mandatory | This object identifies the maximum number of application based tests that can be simultaneously instantiated on the device. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.2 | ScalarapplCurrentNumberOfTests | read-only | mandatory | This object identifies the current number of application based tests that are running on the device. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.3 | ScalarapplStopAllTests | read-write | mandatory | The value of this object corresponds to stop all application based tests on the device. noOp stop but current test results are still available stopAndClear and… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.4 | ScalarapplNewTestId | read-only | mandatory | This value of this object corresponds to getting a magic number to start an application based test. The magic number is used as an index to create a row for th… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5 | TableapplTestStatusTable | not-accessible | mandatory | This table controls all the application tests. It defines a test type, starts a test, and clears a test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1 | RowapplTestStatusEntry | not-accessible | mandatory | An entry containing objects for invoking application based tests |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.1 | ColumnapplTestId | read-only | mandatory | A unique ID to identify each application test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.2 | ColumnapplTestType | read-write | mandatory | This object defines the application test type. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.3 | ColumnapplTestStatus | read-only | mandatory | This object shows the current status of an application test. none - indicates waiting for test parameters. inProgress - indicates the test is in process. succe… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.4 | ColumnapplTestErrorCode | read-only | mandatory | This object shows the reason for a test failure. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.5 | ColumnapplTestOwner | read-write | mandatory | The network manager who has started the test |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.6 | ColumnapplTestRowStatus | read-write | mandatory | This object is used to create a new row or delete an existing row for an application test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6 | TableapplPingTestTable | not-accessible | mandatory | This table contains objects which allow network manager to ping a destination. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1 | RowapplPingTestEntry | not-accessible | mandatory | This table contains the input parameters for a ping test and the results of the ping test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.1 | ColumnapplPingTestId | read-only | mandatory | A unique ID to identify each application test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.2 | ColumnapplPingTestIpAddress | read-write | mandatory | The IP address to be pinged. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.3 | ColumnapplPingTestSourceIpAddr | read-write | mandatory | The Source IP address where we are pinging from. This is an optional object for some devices. See operational specification for its use. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.4 | ColumnapplPingTestPacketSize | read-write | mandatory | This object corresponds to the size of the packet (in bytes) which will be sent during the Ping test. The default value for this object is 64 bytes |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.5 | ColumnapplPingTestTimeout | read-write | mandatory | This object corresponds to a timeout value (in seconds) between Pings. The default value for this object is 5 seconds |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.6 | ColumnapplPingTestMaxPings | read-write | mandatory | This object corresponds to the maximum number of times the device should Ping for the destination. The default value for this object is 10 |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.7 | ColumnapplPingTestPktsSent | read-only | mandatory | This object corresponds to the total number of packets sent. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.8 | ColumnapplPingTestPktsRecv | read-only | mandatory | This object corresponds to the total number of packets received without error |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.9 | ColumnapplPingTestMinTime | read-only | mandatory | The minimum round trip time. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.10 | ColumnapplPingTestMaxTime | read-only | mandatory | The maximum round trip time. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.11 | ColumnapplPingTestAvgTime | read-only | mandatory | The average round trip time. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.12 | ColumnapplPingTestDomain | read-write | mandatory | This object specifies the destination ip address's domain. The Default is service domain. Not allowed if source ip address is entered. This is an optional obje… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.13 | ColumnapplPingTestIfIndex | read-write | mandatory | This object specifies the interface over which the ping test will take place. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7 | TableapplTracerouteConfigTable | not-accessible | mandatory | This table contains objects which allow network manager to enter the parameters of a traceroute test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1 | RowapplTracerouteConfigEntry | not-accessible | mandatory | This table contains the input parameters for a traceroute test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.1 | ColumnapplTracerouteTestId | read-only | mandatory | A unique ID to identify each application test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.2 | ColumnapplTracerouteIpAddress | read-write | mandatory | The destination IP address of a traceroute test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.3 | ColumnapplTracerouteSourceIpAddr | read-write | mandatory | The source IP address of where the traceroute test started. This is an optional object for some devices. See operational specification for its use. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.4 | ColumnapplTraceroutePktsSize | read-write | mandatory | This object corresponds to the size of the packet (in bytes) which will be sent during the traceroute test. Please refer to product specific documentation for … |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.5 | ColumnapplTracerouteTimeout | read-write | mandatory | This object corresponds to a timeout value (in seconds) of a traceroute test. The default value for this object is 5 seconds |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.6 | ColumnapplTracerouteMaxHops | read-write | mandatory | This object corresponds to the maximum number of hops to reach the destination. The default value for this object is device specific. See Operational Specifica… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.7 | ColumnapplTracerouteDomain | read-write | mandatory | This object specifies the destination ip address's domain. The Default is service domain. Not allowed if source ip address is entered. This is an optional obje… |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.8 | ColumnapplTracerouteIfIndex | read-write | mandatory | This object specifies the interface over which the trace-route test will take place. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8 | TableapplTracerouteResultTable | not-accessible | mandatory | This table contains results of traceroute test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1 | RowapplTracerouteResultEntry | not-accessible | mandatory | An entry contains the objects for the traceroute test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.1 | ColumnapplTracerouteResultTestId | read-only | mandatory | A unique ID to identify each application test. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.2 | ColumnapplTracerouteHopCount | read-only | mandatory | This object contains the number of hops to reach the gateway. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.3 | ColumnapplTracerouteIpAddr | read-only | mandatory | This object contains the IP address of the gateway. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.4 | ColumnapplTraceroutePktSize | read-only | mandatory | This object corresponds to the size of the packet (in bytes) which will be sent during the traceroute test. Please refer to product specific documentation for … |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.5 | ColumnapplTracerouteProbe1RTT | read-only | mandatory | This object contains the round trip time (rtt) of the first probe sent to the gateway. If the probe has a timeout the rtt is set to -1. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.6 | ColumnapplTracerouteProbe2RTT | read-only | mandatory | This object contains the round trip time (rtt) of the second probe sent to the gateway. If the probe has a timeout the rtt is set to -1. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.7 | ColumnapplTracerouteProbe3RTT | read-only | mandatory | This object contains the round trip time (rtt) of the third probe sent to the gateway. If the probe has a timeout the rtt is set to -1. |
| 1.3.6.1.4.1.1795.2.24.2.16.1.3 | NodediagTest | |||
| 1.3.6.1.4.1.1795.2.24.2.16.1.3.1 | ScalardiagTestTrapEnable | read-write | mandatory | This object is used to disable or enable TestOver and TestStart trap for all tests. It is bit sum and possible bit positions are 1 TestStart trap 2 TestOver tr… |
| 1.3.6.1.4.1.1795.2.24.2.16.2 | NodediagTestMIBTraps | |||
| 1.3.6.1.4.1.1795.2.24.2.16.2.1 | NodediagApplTestStart | This trap signifies that an application test has been initiated. | ||
| 1.3.6.1.4.1.1795.2.24.2.16.2.2 | NodediagIfTestStart | This trap signifies that a diagnostic test has been initiated. | ||
| 1.3.6.1.4.1.1795.2.24.2.16.2.101 | NodediagApplTestStop | This trap signifies that an application test has completed. This trap compliments the diagApplTestStart trap. | ||
| 1.3.6.1.4.1.1795.2.24.2.16.2.102 | NodediagIfTestOver | This trap signifies that a diagnostic test has completed. This trap compliments the diagIfTestStart trap |