PDN-DS1EXT-MIB
15 objects
The Paradyne enterprise DS1/G.703 extension MIB. This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by rfc2495.
Imported Objects
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | ent-ds1 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.5.5 | IdentitypdnDs1Ext | The Paradyne enterprise DS1/G.703 extension MIB. This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by rfc2495. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1 | NodepdnDs1ExtObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1 | TablepdnDs1ExtConfTable | not-accessible | current | The Paradyne DS1/G.703 extension configuration table. This table is used for configuring extensions to DS1 and G.703 interfaces. |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1 | RowpdnDs1ExtConfEntry | not-accessible | current | An entry in the Paradyne DS1/G.703 extension configuration table. Note: The objects used depend on the type of interface. For DS1: use pdnDs1ExtConfLineLengthT… |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.1 | ColumnpdnDs1ExtConfLineLengthType | read-write | current | This entry specifies the type of loop length for the interface. short-haul is intended for intra-building use. long-haul is intended for inter-building use. |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2 | ColumnpdnDs1ExtConfLineLength | read-write | current | This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only applies to DS1 interfaces. Note: This object shares a mutually exclu… |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3 | ColumnpdnDs1ExtConfLineBuildOut | read-write | current | This entry specifies the line build out, in decibels, for a long-haul DS1 line. dB0Pnt0 = 0.0 dB dB7Pnt5 = -7.5 dB dB15Pnt0 = -15.0 dB dB22Pnt5 = -22.5 dB This… |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4 | ColumnpdnDs1ExtConfConnector | read-write | current | This entry specifies the type of connector to be used. This object only applies to G.703 interfaces. bnc: 75-Ohm connector supporting only short-haul. rj48: 12… |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2 | NodepdnDs1ExtConformance | |||
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1 | NodepdnDs1ExtGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.1 | GrouppdnDs1ExtT1ConfigGroup | current | A collection of configuration objects required for configuring a T1 interface. | |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.2 | GrouppdnDs1ExtE1ConfigGroup | current | A collection of configuration objects required for configuring a G.703 (E1) interface. | |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2 | NodepdnDs1ExtCompliances | |||
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.1 | CompliancepdnDs1ExtCompliance | read-only | current | Compliance statement for using this MIB for configuring DS1 interfaces. |
| 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.2 | CompliancepdnDs1ExtG703Compliance | read-only | current | Compliance statement for using this MIB for configuring G.703 interfaces. |