MIB Viewer

PDN-DSL-ATM-BOND-MIB

122 objects
This MIB module defines a collection of objects for managing the bonding of multiple digital subscriber lines (DSL) to transport ATM streams. At the time this modules was defined, neither the IETF nor the ATM Forum had any indication of plans to produce MIB modules to support the bonding of multiple digital subscriber lines to transport ATM streams. As a result, these objects may be a `temporary' solution should a standards body produces a module to support this type of bonding. The following documents are informational references with respect to this MIB module: [G.998.1] ITU-T G.998.1, `ATM-based Multi-Pair Bonding', January 2005. [RFC 2494] Fowler, D., `Definitions of Managed Objects for the DS0 and DS0 Bundle Interface type', January 1999. [T1E1.4] ANSI T1E1.4/2003-334R6, American National Standards Institute (ANSI), `Draft proposed American National Standard, ATM-based multi-pair bonding', October 2004. [TR-090] Abbi, R., DSL Forum Technical Report Technical Report TR-090, `Protocol Independent Object Model for Managing Next Generation ADSL Technologies', December 2004. ================================================================= == == == Copyright (C) 2005 Paradyne Networks, Inc. == == == =================================================================
Imported Objects
IF-MIBInterfaceIndex
PDN-HEADER-MIBpdn-interfaces
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime RowStatus TestAndIncr TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.1795.2.24.2.6.33IdentitypdnDslAtmBondMIBThis MIB module defines a collection of objects for managing the bonding of multiple digital subscriber lines (DSL) to transport ATM streams. At the time this …
1.3.6.1.4.1.1795.2.24.2.6.33.0NodepdnDslAtmBondNotifications
1.3.6.1.4.1.1795.2.24.2.6.33.0.1NotificationpdnDslAtmBondAtucRateChangecurrentThe downstream transmit rate has changed.
1.3.6.1.4.1.1795.2.24.2.6.33.0.2NotificationpdnDslAtmBondAturRateChangecurrentThe upstream transmit rate has changed.
1.3.6.1.4.1.1795.2.24.2.6.33.0.3NotificationpdnDslAtmBondGroupStatusChangecurrentThe operational status of the group has changed.
1.3.6.1.4.1.1795.2.24.2.6.33.1NodepdnDslAtmBondObjects
1.3.6.1.4.1.1795.2.24.2.6.33.1.1ScalarpdnDslAtmBondNextGroupIndexread-writecurrentThis object is used to establish the next unused group index (pdnDslAtmBondGroupIndex). This object is used to assist the manager in selecting a value for pdnD…
1.3.6.1.4.1.1795.2.24.2.6.33.1.2ScalarpdnDslAtmBondNbrOfGroupsread-onlycurrentThe number of bonding groups configured on this system.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3TablepdnDslAtmBondGroupTablenot-accessiblecurrentThe DSL ATM Bond Group Table. Contains configuration and operational information relative to a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1RowpdnDslAtmBondGroupEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Group Table. Each entry represents a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.1ColumnpdnDslAtmBondGroupIndexnot-accessiblecurrentA unique identifier for a bonding group. This is not the same value as an ifIndex for the group. The pdnDslAtmBondGroupIfIndex object contains the bonding grou…
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.2ColumnpdnDslAtmBondGroupRowStatusread-createcurrentThis object allows create, change, and delete operations on the table. The delete operation can only occur when the pdnDslAtmBondGroupNbrRefs is 0 meaning that…
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.3ColumnpdnDslAtmBondGroupNbrRefsread-onlycurrentThe number of DSL interface / bearer combinations that are members of this group. This is the number of entries in the pdnDslAtmBondMappingTable that have thei…
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.4ColumnpdnDslAtmBondGroupIfIndexread-onlycurrentIdentifies the interface number assigned to this bonding group and is used to identify corresponding rows in the interfaces MIB.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.5ColumnpdnDslAtmBondGroupIDread-createcurrentAn identifier to uniquely identify the bonding group. This ID one of the fields of the Autonomous Status Message and may be useful in some debugging situations.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.6ColumnpdnDslAtmBondGroupAlarmConfProfileNameread-createcurrentIdentifies the Alarm Profile this group is associated with which is an entry in the pdnDslAtmBondAlarmConfProfileTable. If this object is not a zero-length str…
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.7ColumnpdnDslAtmBondGroupAtucMaxNetDataRateread-createcurrentThe maximum net data rate this bonding group is allowed to achieve in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.8ColumnpdnDslAtmBondGroupAturMaxNetDataRateread-createcurrentThe maximum net data rate this bonding group is allowed to achieve in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.9ColumnpdnDslAtmBondGroupAtucMinNetDataRateread-createcurrentThe minimum net data rate this bonding group is allowed to achieve in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.10ColumnpdnDslAtmBondGroupAturMinNetDataRateread-createcurrentThe minimum net data rate this bonding group is allowed to achieve in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.11ColumnpdnDslAtmBondGroupAtucDiffDelayread-createcurrentThe maximum differential delay tolerance among member links in this bonding group in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.12ColumnpdnDslAtmBondGroupAturDiffDelayread-createcurrentThe maximum differential delay tolerance among member links in this bonding group in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.13ColumnpdnDslAtmBondGroupStatusNotifyEnabledread-createcurrentSpecifies whether or not the pdnDslAtmBondGroupStatusChange notification will be generated. When set to true(1), the notification will be generated when the pd…
1.3.6.1.4.1.1795.2.24.2.6.33.1.4TablepdnDslAtmBondMappingTablenot-accessiblecurrentThe DSL ATM Bond Mapping Table. This table is used to map a DSL port and a bearer number to a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1RowpdnDslAtmBondMappingEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Mapping Table. Each entry represents a DSL interface and a a bearer number.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.1ColumnpdnDslAtmBondDslIfIndexnot-accessiblecurrentIdentifies the DSL interface of a link that is to be bonded to the group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.2ColumnpdnDslAtmBondBearerNbrnot-accessiblecurrentIdentifies the bearer number of a link for the DSL line to be bonded to the group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.3ColumnpdnDslAtmBondMappingRowStatusread-createcurrentThis object allows create, change, and delete operations on the table.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.4ColumnpdnDslAtmBondMappingGroupIndexread-createcurrentThe pdnDslAtmBondGroupIndex which identifies the group to which the DSL line and bearer number, which form a link, are to be bound to.
1.3.6.1.4.1.1795.2.24.2.6.33.1.5TablepdnDslAtmBondGroupIndexMappingTablenot-accessiblecurrentThe DSL ATM Bond Group Index Mapping Table. This table identifies the mapping from the bonding group's ifIndex to the bonding group's index.
1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1RowpdnDslAtmBondGroupIndexMappingEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Group Index Mapping Table. Each entry represents an ifIndex for a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1.1ColumnpdnDslAtmBondGroupIndexMappingIndexread-onlycurrentThe pdnDslAtmBondGroupIndex this group ifIndex entry maps to.
1.3.6.1.4.1.1795.2.24.2.6.33.1.6TablepdnDslAtmBondGroupInvMappingTablenot-accessiblecurrentThe DSL ATM Bond Group Inverse Mapping Table. This table identifies the mapping from a bonding group's index and a DSL interface to a bearer. This object provi…
1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1RowpdnDslAtmBondGroupInvMappingEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Inverse Mapping Table. Each entry represents a particular bonding group and a particular DSL interface.
1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1.1ColumnpdnDslAtmBondInvMappingBearerNbrread-onlycurrentThe bearer on a particular DSL interface that is a member of the bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7TablepdnDslAtmBondPerfTablenot-accessiblecurrentThe DSL ATM Bond Current Table. This table contains the status and performance information for bonding groups.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1RowpdnDslAtmBondPerfEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Performance Table. Each entry represents a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.1ColumnpdnDslAtmBondPerfCurrAtucNetDataRateread-onlycurrentThe current net data rate the bonding group has achieved for the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.2ColumnpdnDslAtmBondPerfCurrAturNetDataRateread-onlycurrentThe current net data rate the bonding group has achieved for the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.3ColumnpdnDslAtmBondPerfPrevAtucNetDataRateread-onlycurrentThe previous net data rate the bonding group had achieved for the downstream direction. This value is set at initialization to prevent a notification from bein…
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.4ColumnpdnDslAtmBondPerfPrevAturNetDataRateread-onlycurrentThe previous net data rate the bonding group had achieved for the upstream direction. This value is set at initialization to prevent a notification from being …
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.5ColumnpdnDslAtmBondPerfGroupStatusread-onlycurrentThe status of the bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.6ColumnpdnDslAtmBondPerfFailReasonread-onlycurrentThe reason the operational status of the bonding group is not `operational'.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.7ColumnpdnDslAtmBondPerfFailCountread-onlycurrentA count of the number of times the group was declared `unavailable` since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.8ColumnpdnDslAtmBondPerfRunTimeread-onlycurrentThe total accumulated time the bonding group was in the `normal' operational status since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.9ColumnpdnDslAtmBondPerfUASread-onlycurrentThe total accumulated time the bonding group was unavailable since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.10ColumnpdnDslAtmBondPerfAtucRxCellLossread-onlycurrentThe total number of cells that are lost at the aggregation output in the upstream direction from the bonding group since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.11ColumnpdnDslAtmBondPerfAturRxCellLossread-onlycurrentThe total number of cells that are lost at the aggregation output in the downstream direction from a bonding group since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8TablepdnDslAtmBond15MinIntervalTablenot-accessiblecurrentThe DSL ATM Bond 15-Minute Interval Table. This table contains the status and performance information for bonding groups collected in 15-minute intervals.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1RowpdnDslAtmBond15MinIntervalEntrynot-accessiblecurrentAn entry in the DSL ATM Bond 15-Minute Interval Table. Each entry represents a particular bonding group and a particular 15-minute interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.1ColumnpdnDslAtmBond15MinIntervalNumbernot-accessiblecurrentPerformance Data Interval number. Interval 1 is the most recent previous 15-minute interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.2ColumnpdnDslAtmBond15MinIntervalStartDateAndTimeread-onlycurrentProvides a date-time indication of when the interval started.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.3ColumnpdnDslAtmBond15MinIntervalFailCountread-onlycurrentA count of the number of times the group was declared `unavailable` during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.4ColumnpdnDslAtmBond15MinIntervalRunTimeread-onlycurrentThe accumulated time the bonding group was in the `normal' operational status during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.5ColumnpdnDslAtmBond15MinIntervalUASread-onlycurrentThe accumulated time the bonding group was unavailable during the interval,
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.6ColumnpdnDslAtmBond15MinIntervalAtucRxCellLossread-onlycurrentThe number of cells that are lost at the aggregation output in the upstream direction from the bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.7ColumnpdnDslAtmBond15MinIntervalAturRxCellLossread-onlycurrentThe number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9TablepdnDslAtmBond1DayIntervalTablenot-accessiblecurrentThe DSL ATM Bond 1-Day Interval Table. This table contains the status and performance information for bonding groups collected in 1-Day intervals.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1RowpdnDslAtmBond1DayIntervalEntrynot-accessiblecurrentAn entry in the DSL ATM Bond 1-Day Interval Table. Each entry represents a particular bonding group and a particular 1-day interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.1ColumnpdnDslAtmBond1DayIntervalNumbernot-accessiblecurrentPerformance Data Interval number. Interval 1 is the most recent previous 1-day interval; interval 30 is 30 days ago. Intervals 2..30 are optional.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.2ColumnpdnDslAtmBond1DayIntervalStartDateAndTimeread-onlycurrentProvides a date-time indication of when the interval started.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.3ColumnpdnDslAtmBond1DayIntervalFailCountread-onlycurrentA count of the number of times the group was declared `unavailable` during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.4ColumnpdnDslAtmBond1DayIntervalRunTimeread-onlycurrentThe accumulated time the bonding group was in the `normal' operational status during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.5ColumnpdnDslAtmBond1DayIntervalUASread-onlycurrentThe accumulated time the bonding group was unavailable during the interval,
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.6ColumnpdnDslAtmBond1DayIntervalAtucRxCellLossread-onlycurrentThe number of cells that are lost at the aggregation output in the upstream direction from a bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.7ColumnpdnDslAtmBond1DayIntervalAturRxCellLossread-onlycurrentThe number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10TablepdnDslAtmBondLinkTablenot-accessiblecurrentThe DSL ATM Bond Link Table. This table contains the current status information for a link in a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1RowpdnDslAtmBondLinkEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Link Table. each entry represents a DSL interface on a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.1ColumnpdnDslAtmBondLinkAtucRxLinkStatusread-onlycurrentThe status of the Rx link in a bonded group in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.2ColumnpdnDslAtmBondLinkAturRxLinkStatusread-onlycurrentThe status of the Rx link in a bonded group in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.3ColumnpdnDslAtmBondLinkAtucTxLinkStatusread-onlycurrentThe status of the Tx link in a bonded group in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.4ColumnpdnDslAtmBondLinkAturTxLinkStatusread-onlycurrentThe status of the Rx link in a bonded group in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.5ColumnpdnDslAtmBondLinkAtucAsmRxStatusread-onlycurrentThe status of ASMs received for the link in a bonded in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.6ColumnpdnDslAtmBondLinkAturAsmRxStatusread-onlycurrentThe status of ASMs received for the link in a bonded in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11TablepdnDslAtmBondAlarmConfProfileTablenot-accessiblecurrentThe DSL ATM Bond Alarm Configuration Profile Table. This table contains the alarm configuration profiles for DSL ATM Bonding.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1RowpdnDslAtmBondAlarmConfProfileEntrynot-accessiblecurrentAn entry in the DSL ATM Bond Alarm Configuration Profile Table. Each entry represents a single alarm configuration profile. Profiles may be created/deleted usi…
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.1ColumnpdnDslAtmBondAlarmConfProfileNamenot-accessiblecurrentThis object is the index for the table and identifies a unique row in the table. A default profile with an index of `DEFVAL' will always exist and its paramete…
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.2ColumnpdnDslAtmBondAlarmConfRowStatusread-createcurrentThis object allows profiles to be created to deleted. The delete operation can only occur when the pdnDslAtmBondAlarmConfNbrRefs is 0 meaning that there are no…
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.3ColumnpdnDslAtmBondAlarmConfNbrRefsread-onlycurrentThe number of entries in the pdnDslAtmBondGroupTable that reference this profile.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.4ColumnpdnDslAtmBondAlarmConfAtucThreshRateUpread-createcurrentConfigured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate >= previous rate plus the…
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.5ColumnpdnDslAtmBondAlarmConfAturThreshRateUpread-createcurrentConfigured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate >= previous rate plus the…
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.6ColumnpdnDslAtmBondAlarmConfAtucThreshRateDownread-createcurrentConfigured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate <= previous rate minus th…
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.7ColumnpdnDslAtmBondAlarmConfAturThreshRateDownread-createcurrentConfigured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate <= previous rate minus th…
1.3.6.1.4.1.1795.2.24.2.6.33.2NodepdnDslAtmBondAFNs
1.3.6.1.4.1.1795.2.24.2.6.33.3NodepdnDslAtmBondConformance
1.3.6.1.4.1.1795.2.24.2.6.33.3.1NodepdnDslAtmBondCompliances
1.3.6.1.4.1.1795.2.24.2.6.33.3.1.1CompliancepdnDslAtmBondMIBCompliancecurrentThe compliance statement for the entities which implement the pdnDslAtmBondMIB.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2NodepdnDslAtmBondGroups
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1NodepdnDslAtmBondObjGroups
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.1GrouppdnDslAtmBondGroupcurrentGeneral configuration/definition of a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.2GrouppdnDslAtmBondMaxRateGroupcurrentConfiguration of the maximum net data rate a bonding group is allowed to achieve.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.3GrouppdnDslAtmBondMinRateGroupcurrentConfiguration of the minimum net data rate a bonding group is allowed to achieve.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.4GrouppdnDslAtmBondDiffDelayGroupcurrentConfiguration of maximum differential delay among member links in a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.5GrouppdnDslAtmBondGroupStatusNotifyEnabledGroupcurrentConfiguration of notifications for changes to the status of a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.6GrouppdnDslAtmBondMappingGroupcurrentMap a DSL interface and a bearer to a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.7GrouppdnDslAtmBondIndexMappingGroupcurrentMap from a bonding group's ifIndex to the bonding group's index.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.8GrouppdnDslAtmBondInvMappingGroupcurrentMap from a bonding group and a DSL interface to a bearer.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.9GrouppdnDslAtmBondPerfAggDataRateGroupcurrentStatus of the net data rate the bonding group has currently or had previously achieved.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.10GrouppdnDslAtmBondPerfBondGroupStatusGroupcurrentCurrent status of the bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.11GrouppdnDslAtmBondDateAndTimeGroupcurrentDate-time stamp of when an interval started.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.12GrouppdnDslAtmBondRunTimeGroupcurrentThe tracking of time a bonding group is `operational'.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.13GrouppdnDslAtmBondRxCellLossGroupcurrentThe tracking the total number of cells that are lost at the aggregation output from a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.14GrouppdnDslAtmBondPerfFailReasonGroupcurrentThe reason the operational status of the bonding group is not `operational'.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.15GrouppdnDslAtmBondFailCountGroupcurrentThe number of times a bonding group was declared `unavailable'.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.16GrouppdnDslAtmBondUASGroupcurrentThe time a bonding group was unavailable.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.17GrouppdnDslAtmBondTrafficCapGroupcurrentCurrent status of the link in a bonded group with respect to carrying bonded traffic.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.18GrouppdnDslATmBondAsmRxStatusGroupcurrentStatus of the reception of ASMs for a link in a bonded group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.19GrouppdnDslAtmBondAlarmConfProfileGroupcurrentProvides the ability to create or delete alarm profiles.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.20GrouppdnDslAtmBondAlarmConfAtucThreshRateGroupcurrentProvides the ability to configure thresholds for rate changes in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.21GrouppdnDslAtmBondAlarmConfAturThreshRateGroupcurrentProvides the ability to configure thresholds for rate changes in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.2NodepdnDslAtmBondAfnGroups
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3NodepdnDslAtmBondNtfyGroups
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3.1GrouppdnDslAtmBondNotificationsGroupcurrentThe collection of notifications for the MIB module.
Type Definitions
NameSyntaxStatusDescription
PdnDslAtmBondAsmRxStatusTCINTEGER { receivedASM(1), notReceivedASM(2) }currentThe status of Autonomous Status Message (ASM) received on a link in the past one second. The bonding entity is required to send ASM status messages at no less a frequency than once per second per link.
PdnDslAtmBondGroupBearerNumberTCUnsigned32(1..4)currentBearer number for the line to bond.
PdnDslAtmBondGroupDataRateTCInteger32(-1 | 0..2147483647)currentA data rate, in bits/s, for a bonding group. The value, -1 represents infinity, and indicates that the parameter is to be ignored.
PdnDslAtmBondGroupDiffDelayTolTCUnsigned32(0..2147483647)currentThe maximum differential delay tolerance, in milliseconds, among member links in a bonding group.
PdnDslAtmBondGroupFailReasonTCINTEGER { notApplicable(1), unknown(2), atucMinDataRateNotMet(3), aturMinDataRateNotMet(4), atucDiffDelayExceeded(5), aturDiffDelayExceeded(6) }currentThe reason the operational status for a bonding group is not `operational'.
PdnDslAtmBondGroupIdentityTCUnsigned32(1..65535)currentAn identifier to uniquely identify a bonding group.
PdnDslAtmBondGroupIndexTCInteger32(0..2147483647)currentAn identifier for a bonding group table entry. This syntax was chosen to correspond to the TestAndIncr TC for pdnDslAtmBondNextGroupIndex.
PdnDslAtmBondGroupStatusTCINTEGER { operational(1), unavailable(2) }currentThe status of a group. A group is considered `unavailable' when it does not satisfy the parameters provisioned for the group.
PdnDslAtmBondLinkStatusAsmTCINTEGER { notProvisioned(1), shouldNotBeUsed(2), acceptableToCarryBondedTraffic(3), selectedToCarryBondedTraffic(4) }currentThe status of a link within a bonding group relative to its capability or current state with respect to the transportation of bonded traffic. + | | | Rx Link Status | | 1. Not provisioned. | | The link is indicated as n…