MIB Viewer

PDN-DSLAM-SYSTEM-MIB

74 objects
The DSLAM MIB. This MIB is specific to portcards and DSLAM configuration/stats for MCC and the portcards. The objects defined in this mib are specific to some products and donot apply to all paradyne devices.
Imported Objects
ENTITY-MIBentPhysicalIndex
PDN-HEADER-MIBpdn-common
PDN-TCIdslClockMode SwitchState
RFC1213-MIBifIndex sysObjectID
SNMPv2-CONFNOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString RowStatus TAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.1795.2.24.2.24Identitypdn-dslamThe DSLAM MIB. This MIB is specific to portcards and DSLAM configuration/stats for MCC and the portcards. The objects defined in this mib are specific to some …
1.3.6.1.4.1.1795.2.24.2.24.1NodesysDevDslamMIBObjects
1.3.6.1.4.1.1795.2.24.2.24.1.1NodesysDevStats
1.3.6.1.4.1.1795.2.24.2.24.1.1.1TableloginHistTablenot-accessiblecurrentThis table shows the most recent 10 logins and all active users currently accessing the device. It is indexed by userId and loginTime.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1RowloginHistTableEntrynot-accessiblecurrentThis object corresponds to an entry in the login history table.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.1ColumnloginUserIdread-onlycurrentThis object containes the user login id.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.2ColumnloginTimeread-onlycurrentThis object containes the login time in seconds when the login session is established.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.3ColumnloginAccessAppread-onlycurrentThis object describes the access application used by the end user to access the device. This can be done through console, using telnet, modem, web, or using ft…
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.4ColumnloginAccessHostread-onlycurrentThis object containes the ip address of the network management station when the access application is telnet or ftp. In case of console, this object contains 0…
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.5ColumnloginUserPrivread-onlycurrentThis object containes the access privileges of the user.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.6ColumnloginStatusread-onlycurrentThis object indicates whether the user is still accessing the device.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2TableloginFailureCountTablenot-accessiblecurrentThis table containes the statistics for login failures. It is indexed by access type i.e console, telnet or ftp.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1RowloginFailureCountTableEntrynot-accessiblecurrentThis object corresponds to an entry in the login failure count table.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.1ColumnloginFailureAccessAppread-onlycurrentThis object describes the access application used by the end user to access the device. This can be done through console, using telnet or using ftp.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.2ColumnloginFailureCountread-onlycurrentThis object containes the number of unsuccesful logins for console, ftp or telnet.
1.3.6.1.4.1.1795.2.24.2.24.1.2NodesysDevConfig
1.3.6.1.4.1.1795.2.24.2.24.1.2.1ScalarenablePowerSourceFailureAlarmread-writecurrentThis objects corresponds to enabling/disabling the power source failure alarm - for both A and B power sources This object is for the MCC only. The default val…
1.3.6.1.4.1.1795.2.24.2.24.1.2.2TabledevIfTablenot-accessiblecurrentThis table is used to configure information for a particular interface
1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1RowdevIfTableEntrynot-accessiblecurrentThis object corresponds to an entry in the DevifTable
1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.1ColumndevPacketDiscardPolicyread-createcurrentThis object corresponds to the policy for packet discards during periods of congestion : mrrp - most recently received packets are discarded. lrrp - least rece…
1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.2ColumndevLinkIntegrityread-createcurrentThis object corresponds to the enabling or disabling of the ethernet link integrity : enable - enable link integrity disable - disable link integrity none - fo…
1.3.6.1.4.1.1795.2.24.2.24.1.2.3TablecommunityTrapAddressInfoTablenot-accessiblecurrentThis table is used to set the trap destination address for a particular community.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1RowcommunityTrapAddressInfoTableEntrynot-accessiblecurrentThis object corresponds to an entry in the community trap address info table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.1ColumntrapCommunityNamenot-accessiblecurrentThis object corresponds to the name of the SNMP Community.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.2ColumntrapDestAndPortnot-accessiblecurrentThe IP Address and Port of the destination to which a trap must be sent.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.3ColumntrapsEnableread-createcurrentThis object corresponds to turning traps on/off for a particular destination. enable (1) - traps will be sent to the specified destination. disable (2)- traps …
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.4ColumntrapRowStatusread-onlycurrentThis object is used to add or delete a a row from the table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.4TableentCommunityTablenot-accessiblecurrentThis table is used to set the various configuration parameters for a particular community.
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1RowentCommunityTableEntrynot-accessiblecurrentThis object corresponds to an entry in the community table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.1ColumnentCommunityNamenot-accessiblecurrentThis object corresponds to the name of the SNMP Community
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.2ColumnentCommunityTyperead-createcurrentThe type of the community readOnly - this community is only allowed to do get's readWrite - this community is allowed to do get's and set's The default value o…
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.3ColumnentCommunityRowStatusread-createcurrentThis object is used to add or delete a a row from the table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5TablesysDevUserAccountTablenot-accessiblecurrentThis table contains the user accounts.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1RowsysDevUserAccountEntrynot-accessiblecurrentAn entry containing user account information.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.1ColumnsysDevUserAccountUserIdnot-accessiblecurrentThis object corresponds to the login ID of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.2ColumnsysDevUserAccountPrivilegeread-createcurrentThis object corresponds to the access privilege of the user account. 1 = Operator, 2 = Administrator, 3 = maintenance, 4 = provisioning, 5 = manufacturing.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.3ColumnsysDevUserAccountUserPasswordread-createcurrentThis object corresponds to the password of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.4ColumnsysDevUserAccountAccessPartitionread-createcurrentThis object corresponds to the access partition of the user account. The default value of this object is 'all'
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.5ColumnsysDevUserAccountRowStatusread-createcurrentThis object corresponds to create or delete a row in sysDevUserAccountTable.
1.3.6.1.4.1.1795.2.24.2.24.1.2.6TablesysDevIDSLConfigTablenot-accessiblecurrentA table that contains configuration information about IDSL Card.
1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1RowsysDevIDSLConfigEntrynot-accessiblecurrentA list of information for IDSL device Configuration.
1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.1ColumnsysDevIDSLConfigPrimaryNetClockModeread-createcurrentThis object indicates the network clock mode set for the primary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveCloc…
1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.2ColumnsysDevIDSLConfigSecondaryNetClockModeread-createcurrentThis object indicates the network clock mode set for the secondary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveCl…
1.3.6.1.4.1.1795.2.24.2.24.1.2.7NodesysDevDslamSyslog
1.3.6.1.4.1.1795.2.24.2.24.1.2.7.1ScalarsysDevSyslogFtpServerXferStatsEnableread-writecurrentThis object allows the network manager to enable and disable syslog messages for FTP server file transfer statistics
1.3.6.1.4.1.1795.2.24.2.24.1.2.7.2ScalarsysDevSyslogTftpServerXferStatsEnableread-writecurrentThis object allows the network manager to enable and disable syslog messages for TFTP server file transfer statistics
1.3.6.1.4.1.1795.2.24.2.24.1.2.8TablesysDevConfigUserAccountTablenot-accessiblecurrentThis table contains the user accounts.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1RowsysDevConfigUserAccountEntrynot-accessiblecurrentAn entry containing user account information.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.1ColumnsysDevConfigUserAccountIndexnot-accessiblecurrentThe value of this object is an index of the account config table. This object is used by sysDevConfigUserAccountTable to identify the row in the table. When cr…
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.2ColumnsysDevConfigUserAccountUserIdread-createcurrentThis object corresponds to the login ID of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.3ColumnsysDevConfigUserAccountPrivilegedPasswordread-createcurrentThis object corresponds to the access privilege password of the user account. If user is configured with this password in addition to a UserPassword than the u…
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.4ColumnsysDevConfigUserAccountUserPasswordread-createcurrentThis object corresponds to the password of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.5ColumnsysDevConfigUserAccountRowStatusread-createcurrentThis object corresponds to create or delete a row in sysDevConfigUserAccountTable.
1.3.6.1.4.1.1795.2.24.2.24.1.2.9ScalarsysDevConfigUserAccountIndexNextread-onlycurrentThis object contains an appropriate value to be used for sysDevConfigUserAccountTable. The value of 0 indicates that no unassigned entries are available. To ob…
1.3.6.1.4.1.1795.2.24.2.24.2NodesysDevDslamMIBTraps
1.3.6.1.4.1.1795.2.24.2.24.2.7NotificationcCNcurrentThis trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class
1.3.6.1.4.1.1795.2.24.2.24.2.8NotificationauthenticationFailureTrapcurrentThis trap signifies an authentication failure. Authentication failures can be telnet based or terminal based. This trap is in addition to the SNMP based authen…
1.3.6.1.4.1.1795.2.24.2.24.2.9NotificationfanModuleFailurecurrentThis trap indicates the indicates the failure of the fan module on the device.
1.3.6.1.4.1.1795.2.24.2.24.2.10NotificationpowerSourceAFailurecurrentThis trap indicates that power source A has failed. This is sent only by the MCC card. This trap is of 'minor' class.
1.3.6.1.4.1.1795.2.24.2.24.2.11NotificationslotPollFailurecurrentThis trap indicates a slot poll failure. This is sent only by the MCC card. this trap is of 'major' class.
1.3.6.1.4.1.1795.2.24.2.24.2.12NotificationethernetJabbercurrentThis trap indicates that a jabber condition has been detected on the ethernet interface. This trap is of 'major' class.
1.3.6.1.4.1.1795.2.24.2.24.2.13NotificationethernetJumboscurrentThis trap indicates ethernet jumbos. this trap is of 'minor' class
1.3.6.1.4.1.1795.2.24.2.24.2.14NotificationethernetRuntscurrentThis trap indicates ethernet runts. this trap is of 'minor'
1.3.6.1.4.1.1795.2.24.2.24.2.17NotificationpowerSourceBFailurecurrentThis trap indicates that power source B has failed. This is sent only by the MCC card. This trap is of 'minor' class.
1.3.6.1.4.1.1795.2.24.2.24.2.18NotificationnonIpConservativeCardDetectedcurrentThis trap indicates that a non ip conservative DSL card exist in the chassis at the slot 'slotNumber'.This is sent only by the MCC card. This trap is of warnin…
1.3.6.1.4.1.1795.2.24.2.24.2.20NotificationnonSupportedMCCcurrentAN has detected MCC firmware release too low to support this device
1.3.6.1.4.1.1795.2.24.2.24.2.21NotificationnonSupportedChassiscurrentAN in slot xx has been installed in a chassis that cannot support one or more of its features.
1.3.6.1.4.1.1795.2.24.2.24.2.22NotificationfanEntityModuleFailurecurrentThis trap indicates the indicates the failure of the fan module on the device.
1.3.6.1.4.1.1795.2.24.2.24.2.109NotificationfanModuleOperationalcurrentThis trap indicates the indicates the fan module on the device is operational.
1.3.6.1.4.1.1795.2.24.2.24.2.110NotificationpowerSourceAOperationalcurrentThis trap indicates that the power source A is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSource…
1.3.6.1.4.1.1795.2.24.2.24.2.111NotificationnewCardDetectedcurrentThis trap indicates that a new card was detected in a slot. This is sent only by the MCC card. this trap is of 'warning' class.
1.3.6.1.4.1.1795.2.24.2.24.2.112NotificationethernetJabberClearcurrentThis trap indicates that the jabber condition that was detected no longer exists. This trap is of 'major' class.
1.3.6.1.4.1.1795.2.24.2.24.2.117NotificationpowerSourceBOperationalcurrentThis trap indicates that the power source B is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSource…
1.3.6.1.4.1.1795.2.24.2.24.2.122NotificationfanEntityModuleOperationalcurrentThis trap indicates the indicates the fan module on the device is operational.