PDN-ENTITY-REDUNDANCY-MIB
35 objects
This management information module supports the objects to be used for redundancy of entities.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| PDN-HEADER-MIB | pdnEntityRedundancy |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.41.1 | IdentitypdnEntRedunMIB | This management information module supports the objects to be used for redundancy of entities. | ||
| 1.3.6.1.4.1.1795.2.24.2.41.1.1 | NodepdnEntityRedundancyMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.1 | ScalarpdnEntityRedundancySelection | read-write | current | This object is used to enable or disable the redundancy feature on this device. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.2 | ScalarpdnYCableSelection | read-write | current | This object is used to configure the Y-cable presence used for tx and rx of data between the redundant units. When the selection is enabled (1), it indicates t… |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.3 | ScalarpdnRedunGeneralAlarmStatus | read-only | current | This object provides status of any General Alarm detected by the redundancy feature. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.4 | TablepdnRedunCmdTable | not-accessible | current | This table contains one row per entity module being used for redundancy. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1 | RowpdnRedunCmdEntry | not-accessible | current | Commands that can be performed on a particular entity module used for redundancy. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1.1 | ColumnpdnRedunCommand | read-write | current | This object allows users to command an entity module, configured for redundancy to perform an action such as switch (2). Reading this object should return the … |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.5 | TablepdnRedunStatusTable | not-accessible | current | This table contains configuration and status information related to events in entity modules used for redundancy. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1 | RowpdnRedunStatusEntry | not-accessible | current | Configuration and Status information for a particular entity module used for redundancy. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.1 | ColumnpdnRedunEntityState | read-only | current | This object is used to display the current state on an entity that is used for redundancy. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.2 | ColumnpdnRedunAlarmStatus | read-only | current | This object provides status of any Alarm detected in a redundant entity. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.3 | ColumnpdnRedunNotificationEnable | read-write | current | This object provides the ability to enable and disable the following notifications: o pdnRedunEventHwIncompatible o pdnRedunEventFwIncompatible o pdnRedunEvent… |
| 1.3.6.1.4.1.1795.2.24.2.41.1.1.6 | ScalarpdnRedunGeneralNotificationEnable | read-write | current | This object provides the ability to enable and disable the following general notifications: o pdnRedunEventNoActiveModule o pdnRedunEventStandbyAlarmOrReset |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2 | NodepdnEntityRedundancyNotifications | |||
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0 | NodepdnRedunNotificationsPrefix | |||
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.1 | NotificationpdnRedunEventNoActiveModule | current | This notification will be issued when no module is in the Active State. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.2 | NotificationpdnRedunEventHwIncompatible | current | This notification will be issued when the modules in a redundancy configuration present hardware incompatibilities. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.3 | NotificationpdnRedunEventStandbyAlarmOrReset | current | This notification will be issued when one of the modules configured for redundancy is either in the Standby/Alarm or Reset Test state. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.4 | NotificationpdnRedunEventFwIncompatible | current | This notification will be issued when the modules in a redundancy configuration present firmware incompatibilities. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.5 | NotificationpdnRedunEventCfgIncompatible | current | This notification will be issued when the modules in a redundancy configuration present configuration incompatibilities. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.6 | NotificationpdnRedunEventLinkDefect | current | This notification will be issued when a module in a redundancy configuration has a link condition. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.7 | NotificationpdnRedunEventHwFailure | current | This notification will be issued when a module in a redundancy configuration has a hardware failure condition. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.8 | NotificationpdnRedunEventHwMissingHwFailure | current | This notification will be issued when a module in a redundancy configuration is expecting a piece of hw to be used for redundancy which can not be found or is … | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.3 | NodepdnEntityRedundancyConformance | |||
| 1.3.6.1.4.1.1795.2.24.2.41.1.3.1 | NodepdnEntityRedundancyCompliances | |||
| 1.3.6.1.4.1.1795.2.24.2.41.1.3.1.1 | CompliancepdnEntityRedundancyCompliance | read-only | current | The compliance statement for SNMP entities which manage the configuration parameters on entities used for redundancy. |
| 1.3.6.1.4.1.1795.2.24.2.41.1.3.2 | NodepdnEntityRedundancyGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.41.1.3.2.1 | GrouppdnRedundancyGeneralGroup | current | A collection of general configuration objects for the entity redundancy implementation. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.3.2.2 | GrouppdnEntityRedundancyOptGroup | current | A collection of configuration objects applicable to redundancy implementations. | |
| 1.3.6.1.4.1.1795.2.24.2.41.1.3.2.3 | GrouppdnEntityRedundancyEventGroup | current | A collection of redundancy notifications. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PdnRedunAlarmStatus | BITS { noAlarm(0), linkDefect(1), hwFailure(2), hwMissing(3), hwIncompatible(4), fwIncompatible(5), cfgIncompatible(6) } | current | This textual convention lists the possibles alarm status. The status are: noAlarm This is the normal status when there is no alarm condition. linkDefect This alarm is detected when there is an abnormal condition in the … |
| PdnRedunCmd | INTEGER { noCmd(1), switch(2), forcedswitch(3) } | current | This list of commands allows an user to perform actions on the redundancy entities. The commands are: noCmd This value should be returned by a read request when no previous command has been issue. This value may not be … |
| PdnRedunGeneralAlarmStatus | BITS { noAlarm(0), noActiveModule(1), standbyAlarmOrReset(2) } | current | This textual convention lists the possibles alarm status that are general to the redundancy feature; which are not associated to a particular redundant module. The status are: noAlarm This is the Normal status with no G… |
| PdnRedunStates | INTEGER { activeState(1), activeAlarmState(2), standbyState(3), standbyAlarmState(4) } | current | This textual Convention describes the valid states relevant to the redundancy feature that an entity module can be. The possibles states are: activeState the module is currently performing its main functions in the syst… |