PDN-HDSL2-SHDSL-LINE-MIB
90 objects
The primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May 2002 is updated to support G.shdsl.bis. In addition to providing support for G.shdsl.bis, this MIB may support SHDSL objects that are unique to the enterprise. Decisions as far as how this MIB is supported with respect to the `standard' MIB will be made in an individual basis by those involved with specific projects; those decisions are not dictated here. The following documents should be referenced with respect to this MIB: [G.991.2] ITU-T G991.2 `Single-pair high-speed digital subscriber line (SHDSL) transceivers,' December 2003. [DC-R15] ITU Study Group 15 Temporary Document `G.shdsl.bis: Draft Text`, April 2003. [RFC 3276] Ray, B., Abbi, R. `HDSL2-SHDSL-LINE-MIB', May 2002. ===================================================================== == == == Copyright (C) 2004 Paradyne Corporation. == == == =====================================================================
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.23 | IdentitypdnHdsl2ShdslLineMIB | The primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard'… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.23.0 | NodepdnHdsl2ShdslLineNotifications | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.1 | NotificationpdnHdsl2ShdslLoopAttenCrossing | current | This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the DS… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.2 | NotificationpdnHdsl2ShdslSNRMarginCrossing | current | This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the DSL segment en… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.3 | NotificationpdnHdsl2ShdslPerfESThresh | current | This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/ exceeded for the DSL segment end… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.4 | NotificationpdnHdsl2ShdslPerfSESThresh | current | This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the DSL Se… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.5 | NotificationpdnHdsl2ShdslPerfCRCanomaliesThresh | current | This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the DSL Segm… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.6 | NotificationpdnHdsl2ShdslPerfLOSWSThresh | current | This notification indicates that the LOSW seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the DSL segment endp… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.7 | NotificationpdnHdsl2ShdslPerfUASThresh | current | This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL… | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.8 | NotificationpdnHdsl2ShdslpowerBackoff | current | This notification indicates that the bit setting for powerBackoff in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.9 | NotificationpdnHdsl2ShdsldeviceFault | current | This notification indicates that the bit setting for deviceFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.10 | NotificationpdnHdsl2ShdsldcContinuityFault | current | This notification indicates that the bit setting for dcContinuityFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.11 | NotificationpdnHdsl2ShdslconfigInitFailure | current | This notification indicates that the bit setting for configInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.12 | NotificationpdnHdsl2ShdslprotocolInitFailure | current | This notification indicates that the bit setting for protocolInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.0.13 | NotificationpdnHdsl2ShdslnoNeighborPresent | current | This notification indicates that the bit setting for noNeighborPresent in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1 | NodepdnHdsl2ShdslLineObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.1 | TablepdnHdsl2ShdslSpanStatusExtTable | not-accessible | current | This table extends the hdsl2ShdslSpanStatusTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which provides overall information of DSL spans. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1 | RowpdnHdsl2ShdslSpanStatusExtEntry | not-accessible | current | An entry extends the hdsl2ShdslSpanStatusEntry defined in [RFC 3276]. Each entry corresponds to a DSL line. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.1 | ColumnpdnHdsl2ShdslStatusMaxAttainableLineRate | read-only | current | Contains the maximum attainable line rate, in bps, in this DSL span. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.2 | ColumnpdnHdsl2ShdslStatusActualLineRate | read-only | current | Contains the actual line rate, in bps, in this DSL span. This is based upon measurements made during line probing. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.2 | TablepdnHdsl2ShdslEndpointConfTable | not-accessible | current | This table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persi… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1 | RowpdnHdsl2ShdslEndpointConfEntry | not-accessible | current | Each entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit,… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.1 | ColumnpdnHdsl2ShdslEndpointWirePair | not-accessible | current | The wire-pair of the modem associated with this segment endpoint as per the PdnHdsl2ShdslWirePair textual convention. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.2 | ColumnpdnHdsl2ShdslEndpointAlarmConfProfile | read-write | current | This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3 | TablepdnHdsl2ShdslEndpointCurrTable | not-accessible | current | This table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex,… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1 | RowpdnHdsl2ShdslEndpointCurrEntry | not-accessible | current | Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId … |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.1 | ColumnpdnHdsl2ShdslEndpointCurrAtn | read-only | current | The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.2 | ColumnpdnHdsl2ShdslEndpointCurrSnrMgn | read-only | current | The current SNR margin for this endpoint as reported in a Status Response/SNR message. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.3 | ColumnpdnHdsl2ShdslEndpointCurrStatus | read-only | current | Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powe… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.4 | ColumnpdnHdsl2ShdslEndpointES | read-only | current | Count of Errored Seconds (ES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.5 | ColumnpdnHdsl2ShdslEndpointSES | read-only | current | Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.6 | ColumnpdnHdsl2ShdslEndpointCRCanomalies | read-only | current | Count of CRC anomalies on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.7 | ColumnpdnHdsl2ShdslEndpointLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.8 | ColumnpdnHdsl2ShdslEndpointUAS | read-only | current | Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.9 | ColumnpdnHdsl2ShdslEndpointCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.10 | ColumnpdnHdsl2ShdslEndpointCurr15MinES | read-only | current | Count of Errored Seconds (ES) in the current 15-minute interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.11 | ColumnpdnHdsl2ShdslEndpointCurr15MinSES | read-only | current | Count of Severely Errored Seconds (SES) in the current 15-minute interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.12 | ColumnpdnHdsl2ShdslEndpointCurr15MinCRCanomalies | read-only | current | Count of CRC anomalies in the current 15-minute interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.13 | ColumnpdnHdsl2ShdslEndpointCurr15MinLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.14 | ColumnpdnHdsl2ShdslEndpointCurr15MinUAS | read-only | current | Count of Unavailable Seconds (UAS) in the current 15-minute interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.15 | ColumnpdnHdsl2ShdslEndpointCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.16 | ColumnpdnHdsl2ShdslEndpointCurr1DayES | read-only | current | Count of Errored Seconds (ES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.17 | ColumnpdnHdsl2ShdslEndpointCurr1DaySES | read-only | current | Count of Severely Errored Seconds (SES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.18 | ColumnpdnHdsl2ShdslEndpointCurr1DayCRCanomalies | read-only | current | Count of CRC anomalies during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.19 | ColumnpdnHdsl2ShdslEndpointCurr1DayLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.20 | ColumnpdnHdsl2ShdslEndpointCurr1DayUAS | read-only | current | Count of Unavailable Seconds (UAS) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4 | TablepdnHdsl2Shdsl15MinIntervalTable | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1 | RowpdnHdsl2Shdsl15MinIntervalEntry | not-accessible | current | An entry in the pdnHdsl2Shdsl15MinIntervalTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.1 | ColumnpdnHdsl2Shdsl15MinIntervalNumber | not-accessible | current | Performance Data Interval number. 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.2 | ColumnpdnHdsl2Shdsl15MinIntervalES | read-only | current | Count of Errored Seconds (ES) during the interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.3 | ColumnpdnHdsl2Shdsl15MinIntervalSES | read-only | current | Count of Severely Errored Seconds (SES) during the interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.4 | ColumnpdnHdsl2Shdsl15MinIntervalCRCanomalies | read-only | current | Count of CRC anomalies during the interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.5 | ColumnpdnHdsl2Shdsl15MinIntervalLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds during the interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.6 | ColumnpdnHdsl2Shdsl15MinIntervalUAS | read-only | current | Count of Unavailable Seconds (UAS) during the interval. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5 | TablepdnHdsl2Shdsl1DayIntervalTable | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1 | RowpdnHdsl2Shdsl1DayIntervalEntry | not-accessible | current | An entry in the pdnHdsl2Shdsl1DayIntervalTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.1 | ColumnpdnHdsl2Shdsl1DayIntervalNumber | not-accessible | current | History Data Interval number. Interval 1 is the the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.2 | ColumnpdnHdsl2Shdsl1DayIntervalMoniSecs | read-only | current | The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval dur… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.3 | ColumnpdnHdsl2Shdsl1DayIntervalES | read-only | current | Count of Errored Seconds (ES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.4 | ColumnpdnHdsl2Shdsl1DayIntervalSES | read-only | current | Count of Severely Errored Seconds (SES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.5 | ColumnpdnHdsl2Shdsl1DayIntervalCRCanomalies | read-only | current | Count of CRC anomalies during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.6 | ColumnpdnHdsl2Shdsl1DayIntervalLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.7 | ColumnpdnHdsl2Shdsl1DayIntervalUAS | read-only | current | Count of Unavailable Seconds (UAS) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.6 | TablepdnHdsl2ShdslSpanConfProfileExtTable | not-accessible | current | This table extends the hdsl2ShdslSpanConfProfileTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which supports definitions of span configuration… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1 | RowpdnHdsl2ShdslSpanConfProfileExtEntry | not-accessible | current | An entry extends the hdsl2ShdslSpanConfProfileEntry defined in [RFC 3276]. Each entry corresponds to a profile for a span. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.1 | ColumnpdnHdsl2ShdslSpanConfWireInterface | read-create | current | This object configures number of wires that are operational for this span. The following values are defined for this object: twoWire(1) - 2-wire mode fourWire(… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.2 | ColumnpdnHdsl2ShdslSpanConfMinLineRate | read-create | current | This object configures the minimum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.3 | ColumnpdnHdsl2ShdslSpanConfMaxLineRate | read-create | current | This object configures the maximum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum… |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.7 | TablepdnHdsl2ShdslIfTable | not-accessible | current | This table provides objects related to a particular interface and each entry corresponds to an ifIndex. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1 | RowpdnHdsl2ShdslIfEntry | not-accessible | current | An entry in the pdnHdsl2ShdslIfTableTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1.1 | ColumnpdnHdsl2ShdslIfTableEquipMode | read-write | current | This object allows the mode of the equipment to be set. |
| 1.3.6.1.4.1.1795.2.24.2.6.23.1.8 | ScalarpdnHdsl2ShdslExtendedRateMode | read-write | current | This object is used to select a mode of operation that supports extended rates. Some hardware implementations require different configurations base on whether … |
| 1.3.6.1.4.1.1795.2.24.2.6.23.2 | NodepdnHdsl2ShdslLineAFNs | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3 | NodepdnHdsl2ShdslLineConformance | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.1 | NodepdnHdsl2ShdslLineCompliances | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.1.1 | CompliancepdnHdsl2ShdslLineMIBCompliance | current | The compliance statement for pdnHdsl2ShdslLineMIB entities which implement the pdnHdsl2ShdslLineMIB. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2 | NodepdnHdsl2ShdslLineGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1 | NodepdnHdsl2ShdslLineObjGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.1 | GrouppdnHdsl2ShdslSpanShdslStatusGroup | current | This group supports objects for retrieving SHDSL-specific span related status. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.2 | GrouppdnHdsl2ShdslEndpointConfGroup | current | This group supports objects for configuring parameters for segment endpoints in SHDSL lines. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.3 | GrouppdnHdsl2ShdslEndpointCurrGroup | current | This group supports objects which provide current status and performance measurements relating to segment endpoints in DSL lines. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.4 | GrouppdnHdsl2Shdsl15MinIntervalGroup | current | This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL lines. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.5 | GrouppdnHdsl2Shdsl1DayIntervalGroup | current | This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL line in 1-day intervals. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.6 | GrouppdnHdsl2ShdslSpanConfProfileGroup | current | This group supports objects that constitute configuration profiles for configuring span related parameters in DSL lines. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.7 | GrouppdnHdsl2ShdslIfTableGroup | current | This group supports objects on a per-interface basis. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.8 | GrouppdnHdsl2ShdslExtendedRateModeGroup | current | This group supports objects to select the extended base data rate mode. | |
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.2 | NodepdnHdsl2ShdslLineAfnGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3 | NodepdnHdsl2ShdslLineNtfyGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3.1 | GrouppdnHdsl2ShdslNotificationGroup | current | This group supports notifications of significant conditions associated with DSL lines. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PdnHdsl2ShdslWirePair | INTEGER { wirePair1(1), wirePair2(2), wirePair3(3), wirePair4(4) } | current | This is the referenced pair of wires in a DSL Segment. HDSL2 only supports a single pair (wirePair1), while SHDSL supports an optional second pair (wirePair2), third pair (wirePair3), and a forth pair (wirePair4). |