PDN-HEALTHANDSTATUS-MIB
17 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.4.1 | NodedevStatus | |||
| 1.3.6.1.4.1.1795.2.24.2.4.1.1 | ScalardevHealthAndStatus | read-only | mandatory | Health and Status of the device. Health & Status is represented as a concatenation of health and status message strings, where each message string is separated… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.1 | NodedevSelfTestFailure | This trap signifies that the sending protocol's device has failed self test. The variable binding for this trap would be the selfTest devSelfTestResults object… | ||
| 1.3.6.1.4.1.1795.2.24.2.4.1.2 | ScalardevSelfTestResults | read-only | mandatory | Self-test results. Self-test (or power-up test) results summarizes the test results of each CCA, where each CCA test result is separated by a semi-colon. Refer… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.2 | NodedeviceFailure | This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. | ||
| 1.3.6.1.4.1.1795.2.24.2.4.1.3 | ScalardevAbortStatus | read-only | mandatory | Abort Status. The devAbortStatus object is used to retrieve the latest abort status that is stored in the agent. The agent will need to save the latest abort i… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.4 | TabledevSNMPSetStatusTable | not-accessible | mandatory | A table containing SNMP Set command Statuses when an error occurs. It contains maximum of 5 entries. Oldest entry is pushed out when the table is full and a ne… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.4.1 | RowdevSNMPSetStatusEntry | not-accessible | mandatory | The information regarding each SNMP Set command Status when en error occurs. Each entry is index by a request ID generated by the client and attached to the UD… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.4.1.1 | ColumndevSNMPSetReqId | read-only | mandatory | The Request ID which identifies the SNMP Set command in error. |
| 1.3.6.1.4.1.1795.2.24.2.4.1.4.1.2 | ColumndevSNMPSetStatus | read-only | mandatory | Indicates the error message string associated with the Set command of this row in the table. |
| 1.3.6.1.4.1.1795.2.24.2.4.1.5 | ScalardevAuthenticationFailureIpAddress | read-only | mandatory | Authentication Failure Ip Address is used when a authenticationFailure trap is generated. The single varbind represents the ip address causing the error. If th… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.6 | ScalardevLastTrapString | read-only | mandatory | This object contains a textual description of the last trap that was processed by the device. The exact text in the description is device specific and should b… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.7 | ScalardevFailureStatus | read-only | mandatory | Device Failure status. Conditions that cause failure are further described in the device documentation. |
| 1.3.6.1.4.1.1795.2.24.2.4.1.8 | ScalardevStatusTrapEnable | read-write | mandatory | This object provides ability to enable or disable individual enterprise traps. The object is bit map represented as a sum. The bit positions are: 1 deviceSelfT… |
| 1.3.6.1.4.1.1795.2.24.2.4.1.9 | TabledevSelfTestResultTable | not-accessible | mandatory | A table containing results of power on selftest for the whole unit. |
| 1.3.6.1.4.1.1795.2.24.2.4.1.9.1 | RowdevSelfTestResultEntry | not-accessible | mandatory | The information regarding each SelfTest on each unit. |
| 1.3.6.1.4.1.1795.2.24.2.4.1.9.1.1 | ColumndevSelfTestResult | read-only | mandatory | Self-test results. Self-test (or power-up test) results summarizes the test results of each interface, where each CCA test result is separated by a semi-colon.… |