PDN-MPE-DEVICE-CONTROL-MIB
52 objects
This MIB Module allows a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and configuration files on devices.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| PDN-HEADER-MIB | pdn-mpe |
| PDN-TC | ResetStates |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.12.10 | IdentitympeDevControl | This MIB Module allows a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and config… | ||
| 1.3.6.1.4.1.1795.2.24.12.10.1 | NodempeDevControlMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.12.10.1.1 | NodempeDevHwControl | |||
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.1 | TablempeDevControlTable | not-accessible | current | A table that contains generic information about Card Control. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1 | RowmpeDevControlEntry | not-accessible | current | A list of information for device Control. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1.1 | ColumnmpeDevControlReset | read-create | current | Writing the value reset (2) to this object initiates a Hardware power-on reset of the device. Writing the value resetToFactoryDefaults (3) causes the device to… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.2 | TablempeDevControlSelfTestTable | not-accessible | current | A table containing information to control device specific Self-Test operations. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1 | RowmpeDevControlSelfTestEntry | not-accessible | current | A list of objects for performing Self-Test operations. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1 | ColumnmpeDevControlExtendedSelfTest | read-write | current | This object is used to start the extended Power-On Self-Test test. Writing the value enableExtendSelfTestAndReset(2) to this object resets the device and puts … |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2 | NodempeDevFileXferConfig | |||
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1 | TablempeDevFileXferConfigTable | not-accessible | current | The Paradyne FileXfer Client Config Table. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1 | RowmpeDevFileXferConfigEntry | not-accessible | current | Use of the File Tranfer MIB could be used with other MIBS in the following manner: a) Use another MIB/means to verify available space /make room for a file to … |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.1 | ColumnmpeDevFileXferFileName | read-create | current | This object contains the name of the filetransfer file. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.2 | ColumnmpeDevFileXferCopyProtocol | read-create | current | The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transf… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.3 | ColumnmpeDevFileXferFileType | read-create | current | Specifies the type of file your want to transfer. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.4 | ColumnmpeDevFileXferServerIpAddress | read-create | current | This object contains the file transfer server's IP address. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.5 | ColumnmpeDevFileXferUserName | read-create | current | This object contains the username if a username is needed to login to the server. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.6 | ColumnmpeDevFileXferUserPassword | read-create | current | This object contains the password if a password is needed to login to the server. This object will return null on a read operation. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.7 | ColumnmpeDevFileXferOperation | read-create | current | This object contains the operation the file transfer wants to perform. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.8 | ColumnmpeDevFileXferPktsSent | read-only | current | This object contains the the number of packets sent to the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.9 | ColumnmpeDevFileXferPktsRecv | read-only | current | This object contains the the number of packets received from the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.10 | ColumnmpeDevFileXferOctetsSent | read-only | current | This object contains the the number of octets sent to the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.11 | ColumnmpeDevFileXferOctetsRecv | read-only | current | This object contains the the number of octets received from the server at the time of interrogation. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.12 | ColumnmpeDevFileXferOwnerString | read-create | current | The entity which currently has the 'ownership' required to invoke the operation on this index. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.13 | ColumnmpeDevFileXferStatus | read-only | current | This object contains the status of the file transfer. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.14 | ColumnmpeDevFileXferErrorStatus | read-only | current | This object contains the reason code of the failure determined in mpeDevFileXferStatus. The reason code are specific to the file transfer protocol. Please refe… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.15 | ColumnmpeDevFileXferSendEvent | read-create | current | This object indicates whether or not to send the mpeDevFileXferEvent event trap . |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.16 | ColumnmpeDevFileXferRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.17 | ColumnmpeDevFileXferXferTime | read-only | current | This object indicates the elapsed time (in hundredths of a second) of the file transfer. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.18 | ColumnmpeDevFileXferFileFormat | read-create | current | This object contains the file representation type. A file representation type of ascii implies an ASCII, non-print text file. A file representation type of bin… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.3 | NodempeDevFirmwareControl | |||
| 1.3.6.1.4.1.1795.2.24.12.10.1.3.1 | TablempeDevFirmwareControlTable | not-accessible | current | A list of the current Firmware Releases and their associated status. Each Firmware Release will be indexed by a number from 1 to N. The user will be able to vi… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1 | RowmpeDevFirmwareControlEntry | not-accessible | current | The Device Firmware Release entry. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.1 | ColumnmpeDevFirmwareControlIndex | read-only | current | This object is used to index the Firmware table (range 1 to N). |
| 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.2 | ColumnmpeDevFirmwareControlRelease | read-only | current | This object indicates the Software Release for this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be b… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.3 | ColumnmpeDevFirmwareControlOperStatus | read-only | current | This object indicates whether or not the indexed Firmware entry contains a valid(1) or invalid(2) Firmware. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.4 | ColumnmpeDevFirmwareControlAdminStatus | read-create | current | This object indicates whether or not the indexed Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause th… |
| 1.3.6.1.4.1.1795.2.24.12.10.1.4 | NodempeDevTestControl | |||
| 1.3.6.1.4.1.1795.2.24.12.10.1.4.3 | TablempeDevControlTestTable | not-accessible | current | A table that contains configuration information to perform device specific tests. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1 | RowmpeDevControlTestEntry | not-accessible | current | A list of configuration information for device specific tests. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.1 | ColumnmpeDevControlTestType | read-write | current | This object is used to specify the type of the test to start. |
| 1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.2 | ColumnmpeDevControlTestStatus | read-only | current | The test status on the device. This object indicates whether the indexed test is currently active(1) or inactive(2). |
| 1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.3 | ColumnmpeDevControlTestCmd | read-write | current | Used to start or stop the indexed test. When read, the value returned will be the next logical command. |
| 1.3.6.1.4.1.1795.2.24.12.10.2 | NodempeDevControlMIBTraps | |||
| 1.3.6.1.4.1.1795.2.24.12.10.2.0 | IdentitympeDevControlMIBTrapsV2 | current | The traps for the device control MIB. | |
| 1.3.6.1.4.1.1795.2.24.12.10.2.0.1 | NotificationmpeDevFileXferEvent | current | This trap is to communicate a couple of things about the completion of a file transfer. mpeDevFileXferStatus - Did it complete successfully or not. mpeDevFileX… | |
| 1.3.6.1.4.1.1795.2.24.12.10.3 | NodempeDevControlMIBGroups | |||
| 1.3.6.1.4.1.1795.2.24.12.10.3.1 | GroupmpeDevHwControlGroup | current | Objects necessary to implement minimal hardware control | |
| 1.3.6.1.4.1.1795.2.24.12.10.3.2 | GroupmpeDevFileXferConfigGroup | current | Object group used to implement file transfer functionality | |
| 1.3.6.1.4.1.1795.2.24.12.10.3.3 | GroupmpeDevFirmwareControlGroup | current | Object group used to manage firmware releases on devices | |
| 1.3.6.1.4.1.1795.2.24.12.10.3.4 | GroupmpeDevTestControlGroup | current | Objects necessary to implement device specific tests | |
| 1.3.6.1.4.1.1795.2.24.12.10.3.5 | GroupmpeDevFileXferEventGroup | current | Notifications associated with mpeDevFileXferConfigGroup |