MIB Viewer

PDN-MPE-DSLAM-SYSTEM-MIB

53 objects
The mpe dslam MIB. This MIB is written specifically to extend entPhysicalTable.
Imported Objects
ENTITY-MIBentPhysicalEntry entPhysicalIndex
PDN-HEADER-MIBpdn-mpe
PDN-MPE-MIB2-MIBmpeSysObjectID
PDN-TCContactState
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCTEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.1795.2.24.12.24Identitympe-dslamThe mpe dslam MIB. This MIB is written specifically to extend entPhysicalTable.
1.3.6.1.4.1.1795.2.24.12.24.1NodempeSysDevDslamMIBObjects
1.3.6.1.4.1.1795.2.24.12.24.1.1NodempeEntExtAlarms
1.3.6.1.4.1.1795.2.24.12.24.1.1.1TablempeEntExtAlarmTablenot-accessiblecurrentThis table lists the alarm states of the objects listed in the entity-MIB entPhysicalTable.
1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1RowmpeEntExtAlarmEntrynot-accessiblecurrentAn mpeEntExtAlarmTable entry indicates the alarm state of the physical entity.
1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1.1ColumnmpeEntExtAlarmread-onlycurrentThis variable indicates the alarm state of the physical entity.
1.3.6.1.4.1.1795.2.24.12.24.1.2NodempeAlarmRelay
1.3.6.1.4.1.1795.2.24.12.24.1.2.1ScalarmpeAlarmRelayEquipIndexaccessible-for-notifydeprecatedThis variable is the index of the equipment whose alarms are being relayed. It is a integer number starting from 1 until the max number of physical connectors …
1.3.6.1.4.1.1795.2.24.12.24.1.2.2ScalarmpeAlarmRelayInputContactStateaccessible-for-notifydeprecatedThis variable indicates the alarm state of the Input Contact (open/closed). NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable…
1.3.6.1.4.1.1795.2.24.12.24.1.2.3TablempeAlarmRelayTablenot-accessiblecurrentThis table holds objects that relate to Alarm Relay input or output.
1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1RowmpeAlarmRelayEntrynot-accessiblecurrentAn entry in this table is a sparse augmentation of the entPhysicalEntry. As such, it is indexed by the entPhysicalIndex and not an augmentation of the entPhysi…
1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1.1ColumnmpeAlarmRelayStateread-writecurrentThis object is used to read or write the state an alarm relay input or output.
1.3.6.1.4.1.1795.2.24.12.24.1.3NodempeEntExtMibObjects
1.3.6.1.4.1.1795.2.24.12.24.1.3.1TablempeEntPhysicalExtTablenot-accessiblecurrentThis table contains entity information that is not defined in the standard ENTITY-MIB.
1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1RowmpeEntPhysicalExtEntrynot-accessiblecurrentAn entry extends the entPhysicalEntry defined in the ENTITY-MIB.
1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.1ColumnmpeEntPhysicalExtUpTimeread-onlycurrentThe time (in hundredths of a second sysUpTime) since the entity was last re-initialized.
1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.2ColumnmpeEntPhysicalExtLocationread-writecurrentThis object allows the manager to enter the location of the physical entity where applicable. For example, in a stack, chassis or units may be in different loc…
1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.3ColumnmpeEntPhysicalExtAdminStatusread-writecurrentThe desired state of the entity.
1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.4ColumnmpeEntPhysicalExtOperStatusread-onlycurrentThe current operational state of the entity.
1.3.6.1.4.1.1795.2.24.12.24.2NodempeSysDevDslamMIBTraps
1.3.6.1.4.1.1795.2.24.12.24.2.0NodempeSysDevDslamMIBNotifications
1.3.6.1.4.1.1795.2.24.12.24.2.0.26NotificationmpeAlarmRelayInputStateChangedcurrentThis trap signifies that the state of the Alarm Relay Input has changed.
1.3.6.1.4.1.1795.2.24.12.24.2.0.27NotificationmpeFanEntityModuleFailurecurrentThis trap indicates the failure of the fan module on the device.
1.3.6.1.4.1.1795.2.24.12.24.2.0.28NotificationmpeFanEntityModuleOperationalcurrentThis trap indicates the indicates the fan module on the device is back to operational.
1.3.6.1.4.1.1795.2.24.12.24.2.0.29NotificationmpePowerSourceAFailurecurrentThis trap indicates that power source A has failed.
1.3.6.1.4.1.1795.2.24.12.24.2.0.30NotificationmpePowerSourceBFailurecurrentThis trap indicates that power source B has failed.
1.3.6.1.4.1.1795.2.24.12.24.2.0.31NotificationmpePowerSourceAOperationalcurrentThis trap indicates that the power source A is operational. This trap compliments powerSourceAFailure trap.
1.3.6.1.4.1.1795.2.24.12.24.2.0.32NotificationmpePowerSourceBOperationalcurrentThis trap indicates that the power source B is operational. This trap compliments powerSourceBFailure trap.
1.3.6.1.4.1.1795.2.24.12.24.2.7NotificationmpeCcncurrentThis trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class
1.3.6.1.4.1.1795.2.24.12.24.2.15NotificationmpeDeviceFailurecurrentThis trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. Note there are no variable bindings for th…
1.3.6.1.4.1.1795.2.24.12.24.2.16NotificationmpeDeviceFailureClearedcurrentThis trap signifies that the sending protocol's device has failed but now it is operational. Failure was not a result of a device test.
1.3.6.1.4.1.1795.2.24.12.24.2.20NotificationmpeNonSupportedMCCcurrentAN has detected MCC firmware release too low to support this device
1.3.6.1.4.1.1795.2.24.12.24.2.21NotificationmpeNonSupportedChassiscurrentAN in slot xx has been installed in a chassis that cannot support one or more of its features.
1.3.6.1.4.1.1795.2.24.12.24.2.22NotificationmpeAlarmRelayInputContactStateChangeddeprecatedThis trap signifies that the state of the InputContact Alarm has changed since last time. NOTE: This object has been deprecated. Please consider using the mpeA…
1.3.6.1.4.1.1795.2.24.12.24.2.23NotificationmpeEntPhysicalExtEntityCreatedcurrentThis trap signifies that an instance of this entity has been created in the entPhysicalTable. This trap is generated in addition to the entConfigChange notific…
1.3.6.1.4.1.1795.2.24.12.24.2.24NotificationmpeEntPhysicalExtEntityDeletedcurrentThis trap signifies that an instance of this entity has been deleted from the entPhysicalTable. This trap is generated in addition to the entConfigChange notif…
1.3.6.1.4.1.1795.2.24.12.24.2.25NotificationmpeEntPhysicalExtEntityChangedcurrentThis trap signifies that an instance of this entity has been modified in the entPhysicalTable as a result of a change in any of the objects in that table. This…
1.3.6.1.4.1.1795.2.24.12.24.3NodempeSysDevDslamConformance
1.3.6.1.4.1.1795.2.24.12.24.3.1NodempeSysDevDslamGroups
1.3.6.1.4.1.1795.2.24.12.24.3.1.1GroupmpeSysDevDslamAlarmStateGroupcurrentThe collection of objects which are used to describe alarm states for equipments physically connected to a DSLAM device.
1.3.6.1.4.1.1795.2.24.12.24.3.1.2GroupmpeEntityExtNotificationGroupcurrentThe collection of objects which are used to notify that trap conditions are met.
1.3.6.1.4.1.1795.2.24.12.24.3.1.3GroupmpeSysDevDslamAlarmRelayGroupcurrentThe collection of objects which are used for Alarm Relay objects.
1.3.6.1.4.1.1795.2.24.12.24.3.1.4GroupmpeEntPhysicalExtGroupcurrentThe collection of objects which are used in extending the entPhysicalTable.
1.3.6.1.4.1.1795.2.24.12.24.3.1.5GroupmpeEntPhysicalExtNotificationObjectGroupcurrentA collection of objects that are included in the OBJECTS clause of notifications.
1.3.6.1.4.1.1795.2.24.12.24.3.1.6GroupmpeEntityExtPowerFailureNotificationGroupcurrentThe collection of objects which are used to notify that trap conditions are met.
1.3.6.1.4.1.1795.2.24.12.24.3.2NodempeSysDevDslamCompliances
1.3.6.1.4.1.1795.2.24.12.24.3.2.1CompliancempeSysDevDslamAlarmCompliancescurrentThe compliance statement for entities and their alarms states.
1.3.6.1.4.1.1795.2.24.12.24.3.2.2CompliancempeSysDevDslamAlarmDeprecatedCompliancesdeprecatedThe compliance statement for deprecated groups
1.3.6.1.4.1.1795.2.24.12.24.3.3NodempeSysDevDslamDeprecatedGroup
1.3.6.1.4.1.1795.2.24.12.24.3.3.1GroupmpeDslamDeprecatedObjectsGroupdeprecatedThe collection of objects that have been deprecated.
1.3.6.1.4.1.1795.2.24.12.24.3.3.2GroupmpeDslamDeprecatedNotificationsGroupdeprecatedThe collection of traps/notifications that have been deprecated.
Type Definitions
NameSyntaxStatusDescription
MpeEntExtAdminStatusINTEGER { up(1), down(2), testing(3) }currentValues to support the desired state of the entity. These values were selected to correspond to the syntax of the ifAdminStatus in the IF-MIB.
MpeEntExtOperStatusINTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), reserved1(7) }currentValues to support the current operational state of the entity. These values were selected to correspond to the syntax of the ifOperStatus in the IF-MIB.