MIB Viewer

PDN-REACHDSL-MIB

41 objects
The Paradyne enterprise ReachDSL MIB. This MIB is written specifically to facilitate in the management of ReachDSL devices as well as help in configuration of Spectrum Management specific objects for ReachDSL products.
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.1795.2.24.2.6.20IdentitypdnReachDSLThe Paradyne enterprise ReachDSL MIB. This MIB is written specifically to facilitate in the management of ReachDSL devices as well as help in configuration of …
1.3.6.1.4.1.1795.2.24.2.6.20.1NodepdnReachDSLObjects
1.3.6.1.4.1.1795.2.24.2.6.20.1.1ScalarreachDSLSpectrumMgmtSelectionread-writecurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object is used to Enable or Disable Spec…
1.3.6.1.4.1.1795.2.24.2.6.20.1.2ScalarreachDSLSpectrumMgmtZoneread-onlydeprecatedThis object shows the geographic location or the spectrum zone used for spectrum management. It also represents which Spectrum Management standard will be used…
1.3.6.1.4.1.1795.2.24.2.6.20.1.3TablereachDSLSpectrumMgmtConfTablenot-accessiblecurrentThe ReachDSL Spectrum Management Configuration Table This table is used for configuring spectrum management objects.
1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1RowreachDSLSpectrumMgmtConfEntrynot-accessiblecurrentAn entry in the ReachDSL Spectrum Management Configuration table. Note: This entry can be accessed only for ifIndex values that belong to a physical interface.…
1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1ColumnreachDSLSpectrumMgmtConfEWLread-writecurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The Equivalent Working Length (EWL). The valu…
1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2ColumnreachDSLSpectrumMgmtConfLoopLengthread-writecurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This entry specifies the loop length for the …
1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.3ColumnreachDSLSpectrumMgmtConfAtucMaxTxPowerread-writecurrentThe maximum transmit power at the ATUC (in tenth dB). This value will be based on the spectrum management selection. It ranges from -140 to 120 in increments o…
1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.4ColumnreachDSLSpectrumMgmtConfAturMaxTxPowerread-writecurrentThe maximum transmit power at the ATUR (in tenth dB). This value will be based on the spectrum management selection. It ranges from -140 to 120 in increments o…
1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.5ColumnreachDSLSpectrumMgmtConfQuadModeread-writecurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This entry specifies the quad cable configura…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4TablereachDSLSpectrumMgmtLineInfoTablenot-accessiblecurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The ReachDSL Spectrum Management Line Info Ta…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1RowreachDSLSpectrumMgmtLineInfoEntrynot-accessiblecurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. An entry in the reachDSLSpectrumMgmtLineInfoT…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.1ColumnreachDSLSpectrumMgmtAtucMaxTxRateread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This rate will be the max allowed Tx Rate(in …
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.2ColumnreachDSLSpectrumMgmtAtucMinTxRateread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This rate will be the min allowed Tx Rate bas…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.3ColumnreachDSLSpectrumMgmtAtucMaxTxPowerread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The maximum transmit power at the ATUC (in te…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.4ColumnreachDSLSpectrumMgmtAturMaxTxRateread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This rate will be the max allowed Tx Rate(in …
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.5ColumnreachDSLSpectrumMgmtAturMinTxRateread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This rate will be the min allowed Tx Rate bas…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.6ColumnreachDSLSpectrumMgmtAturMaxTxPowerread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The maximum transmit power at the ATUR (in te…
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.7ColumnreachDSLSpectrumMgmtMinEWLread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The minimum value (in feet, if 'EWLUnits' is …
1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.8ColumnreachDSLSpectrumMgmtMaxEWLread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The maximum value (in feet, if 'EWLUnits' is …
1.3.6.1.4.1.1795.2.24.2.6.20.1.5TablereachDSLLineTablenot-accessiblecurrentThe ReachDSL Line Table.
1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1RowreachDSLLineEntrynot-accessiblecurrentAn entry in the reachDSLLineTable. Note: This entry can be accessed only for ifIndex values that belong to a physical interface. e.g. for ifType = 'adsl'.
1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1.1ColumnreachDSLPotsDetectionVoltageread-writecurrentThis object defines the configurable voltage used to detect the presence of POTS on the DSL line. The range is 0-74 volts. The default value is 3 volts. Note: …
1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1.2ColumnreachDSLCircuitIdentifierread-writedeprecatedThe value of this object reflects the transmission vendor's circuit identifier to facilitate troubleshooting. Note: This object can be accessed only for ifInde…
1.3.6.1.4.1.1795.2.24.2.6.20.1.6ScalarreachDSLSpectrumMgmtLoopMeasurementMethodread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object indicates the measurement method …
1.3.6.1.4.1.1795.2.24.2.6.20.1.7ScalarreachDSLSpectrumMgmtEWLUnitsread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object indicates the units of measuremen…
1.3.6.1.4.1.1795.2.24.2.6.20.1.8ScalarreachDSLSpectrumMgmtModeread-onlycurrentThis object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object restricts the MAX-ACCESS of the '…
1.3.6.1.4.1.1795.2.24.2.6.20.2NodepdnReachDSLConformance
1.3.6.1.4.1.1795.2.24.2.6.20.2.1NodepdnReachDSLGroups
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.1GrouppdnReachDSLConfigurationGroupdeprecatedA collection of configuration objects required for providing access to configuration as well as status information for reachDSL products.
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.2GrouppdnReachDSLInformationGroupdeprecatedA collection of objects providing access meant specifically for accessing information for for reachDSL products.
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.3GrouppdnReachDSLDeprecatedGroupdeprecatedA collection of objects that have been deprecated.
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.4GrouppdnReachDSLGeneralConfigGroupcurrentA collection of configuration objects required for providing access to configure all reachDSL interfaces.
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.5GrouppdnReachDSLGeneralInformationGroupcurrentA collection of objects providing information applicable to all reachDSL interfaces.
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.6GrouppdnReachDSLEWLModeGroupcurrentA collection of objects providing configuration access and information specific to reachDSL interfaces whose loop/line length measurement method is EWL. i.e.th…
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.7GrouppdnReachDSLLoopLengthModeGroupcurrentA collection of object(s) providing configuration access and information specific to reachDSL interfaces whose loop/line length measurement method is Loop Leng…
1.3.6.1.4.1.1795.2.24.2.6.20.2.1.8GrouppdnReachDSLQuadModeGroupcurrentA collection of object(s) providing configuration access and information specific to reachDSL interfaces whose loop/line length measurement method is based on …
1.3.6.1.4.1.1795.2.24.2.6.20.2.2NodepdnReachDSLCompliances
1.3.6.1.4.1.1795.2.24.2.6.20.2.2.1CompliancepdnReachDSLComplianceread-onlydeprecatedThe compliance statement for SNMP entities which manage ReachDSL interfaces.
1.3.6.1.4.1.1795.2.24.2.6.20.2.2.2CompliancepdnReachDSLCompliance1read-onlycurrentThe compliance statement for SNMP entities which manage ReachDSL interfaces.