PDN-SFP-MIB
56 objects
SFP is short for Small Form-Factor Pluggable (SFP) Transceiver. They plug into an SFP Compaitble Port and allow for compact Hardware design SFP modules contain an EEPROM containing information about the part. This MIB defines objects which will allow an NMS to extract the information from the SFP modules in a MIB format. The MIB objects defined in this MIB are based on the **Small Form Factor Pluggable (SFP) Transceiver MultiSource Agreement(MSA)** Since SFP MODULES are an extension of the port itself, the ifIndex for a sfp Compatible Port will be used to access information from these modules. The Entity MIB (RFC 2737) Should Contain Entries for Each SFP Module. SFP to Port to PortIfIndex can be acheived via the Entity MIB (RFC2737)
Imported Objects
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-ietf-drafts |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.14.3 | IdentitypdnSfp | SFP is short for Small Form-Factor Pluggable (SFP) Transceiver. They plug into an SFP Compaitble Port and allow for compact Hardware design SFP modules contain… | ||
| 1.3.6.1.4.1.1795.2.24.14.3.1 | NodesfpMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.14.3.1.1 | ScalarsfpCompatibleInterfaceCount | read-only | current | The number of physical ports in the system which are sfp compatible |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2 | TablesfpInfoTable | not-accessible | current | The sfp information table. |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1 | RowsfpInfoEntry | not-accessible | current | An entry in the SFP Information Table |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.1 | ColumnsfpIdentifier | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.2 | ColumnsfpVendorSpecificIdentifier | read-only | current | The vendor specific identifier. This Object will be set to value other than {0,0} only if sfpIdentifier returns a value of other |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.3 | ColumnsfpExtIdentifier | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.4 | ColumnsfpConnector | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.5 | ColumnsfpVendorSpecificConnector | read-only | current | The type of vendor specific Connector. This Object will be set to value other than {0,0} only if sfpConnector returns a value of other |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.6 | ColumnsfpTransceiverComplianceCodes | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.7 | ColumnsfpFibreChannelLinkLength | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.8 | ColumnsfpFibreChannelTransmitterTechnology | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.9 | ColumnsfpFibreChannelTransmissionMedia | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.10 | ColumnsfpFibreChannelTransmissionSpeed | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.11 | ColumnsfpEncoding | read-only | current | |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.12 | ColumnsfpBRNominal100Mbps | read-only | current | The nominal bit rate(BR, nominal) which is specified in unitd of 100mbps, rounded off to the nearest 100 Mbps. The bit rate includes those bits necessary to en… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.13 | ColumnsfpLength9MiKm | read-only | current | The link length that is supported by the sfp transceiver while operating in compliance with applicable standards using single mode fibre (9 micron). The value … |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.14 | ColumnsfpLength9Mi100M | read-only | current | The link length that is supported by the sfp transceiver while operating in compliance with applicable standards using single mode fibre (9 micron).The value i… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.15 | ColumnsfpLength50Mi10M | read-only | current | The link length that is supported by the sfp transceiver while operating in compliance with applicable standards using multi-mode fibre (50 micron). The value … |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.16 | ColumnsfpLength62Pt5Mi10M | read-only | current | The link length that is supported by the sfp transceiver while operating in compliance with applicable standards using multi-mode fibre (62.5 micron). The valu… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.17 | ColumnsfpLengthCopperM | read-only | current | The link length that is supported by the sfp transceiver while operating in compliance with applicable standards using copper cable. The value is in units of 1… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.18 | ColumnsfpVendorName | read-only | current | The sfp vendor name which is essentially the full name of the corporation, a commonly accepted abbreviation of the name of the corporation, the SCSI company co… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.19 | ColumnsfpVendorOUI | read-only | current | The sfp vendor organizationally unique identifier field (vendor OUI) that contains the IEEE company identifier for the vendor. A value of all zero in the 3 oct… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.20 | ColumnsfpVendorPN | read-only | current | The sfp vendor part number (Vendor PN) or product name if the Vendor PN is unspecified, the null string {0, 0} will be returned |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.21 | ColumnsfpVendorSN | read-only | current | The sfp vendor serial number (Vendor SN) if the Vendor SN is unspecified, the null string {0, 0} will be returned |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.22 | ColumnsfpVendorRev | read-only | current | The sfp vendor product revision number (Vendor Rev) if the Vendor Rev is unspecified, the null string {0, 0} will be returned |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.23 | ColumnsfpLaserWavelength | read-only | current | Nominal Transmitter output wavelength at room temperature. |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.24 | ColumnsfpOptions | read-only | current | The options implemented in the SFP transceiver unknown rateSelect If this bit is not set, no control of pin is required. If this bit is set, then active contro… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.25 | ColumnsfpBRMin | read-only | current | The lower bit rate limit at which the SFP transceiver will meet its specifications (BR, min) is specified in units of 1% below the nominal bit rate. A value of… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.26 | ColumnsfpBRMax | read-only | current | The upper bit rate limit at which the SFP transceiver will meet its specifications (BR, max) is specified in units of 1% above the nominal bit rate. A value of… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.27 | ColumnsfpVendorDate | read-only | current | The Vendors date |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.28 | ColumnsfpVendorSpecificLotCode | read-only | current | The Vendor Specific Lot code. A value of {0, 0} indicates that the lot code is unspecified |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.29 | ColumnsfpVendorSpecificData | read-only | current | Vendor Specific Information which can be read from the SFP transceiver |
| 1.3.6.1.4.1.1795.2.24.14.3.1.2.1.30 | ColumnsfpStatusCurrent | read-only | current | The current state of the sfp transceiver unknown notInstalled installed faulty operational enabled disabled invalidCCBase of serial information in the SFP tran… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.3 | TablesfpCommandTable | not-accessible | current | The sfp command table. |
| 1.3.6.1.4.1.1795.2.24.14.3.1.3.1 | RowsfpCommandEntry | not-accessible | current | An entry in the SFP Command Table |
| 1.3.6.1.4.1.1795.2.24.14.3.1.3.1.1 | ColumnsfpCommand | read-write | current | This Object specifies the command to be applied to the sfp transceiver associated with a physical interface noCmd enable disable reset when read the last comma… |
| 1.3.6.1.4.1.1795.2.24.14.3.1.4 | ScalarsfpNotificationEnable | read-write | current | Provides the ability to enable and disable notifications defined in this mib faulty indicates sfpEventFaulty notifications should be generated when the sfp is … |
| 1.3.6.1.4.1.1795.2.24.14.3.2 | NodesfpMIBNotifications | |||
| 1.3.6.1.4.1.1795.2.24.14.3.2.0 | NodesfpNotificationsPrefix | |||
| 1.3.6.1.4.1.1795.2.24.14.3.2.0.1 | NotificationsfpEventFaulty | current | The sfpEventFaulty notification is sent when the sfp associated with a physical port is detected as being faulty | |
| 1.3.6.1.4.1.1795.2.24.14.3.2.0.2 | NotificationsfpEventOperational | current | The sfpEventOperational notification is sent when the sfp associated with a physical port is detected as being working normally | |
| 1.3.6.1.4.1.1795.2.24.14.3.2.0.3 | NotificationsfpEventInserted | current | The sfpEventInserted notification is sent when the sfp is inserted into a physical port | |
| 1.3.6.1.4.1.1795.2.24.14.3.2.0.4 | NotificationsfpEventRemoved | current | The sfpEventRemoved notification is sent when the sfp is removed from a physical port | |
| 1.3.6.1.4.1.1795.2.24.14.3.3 | NodesfpMIBConformance | |||
| 1.3.6.1.4.1.1795.2.24.14.3.3.1 | NodesfpGroups | |||
| 1.3.6.1.4.1.1795.2.24.14.3.3.1.1 | GroupsfpMIBObjectsGroup | current | A collection of scalar objects in section sfpMIBObjects providing information about sfp compatible intefaces | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.1.2 | GroupsfpInformationGroup | current | A collection of sfpInfoTable objects providing information applicable to sfp transceivers. | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.1.3 | GroupsfpCommandGroup | current | A collection of sfpCommandTable objects providing a way to issue commands to an sfp transceiver. | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.1.4 | GroupsfpNotificationsGroup | current | A collection of scalar objects in section sfpMIBObjects to enable/disable notifications sent by the agent | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.1.5 | GroupsfpEventGroup | current | A collection of sfp notifications | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.2 | NodesfpCompliances | |||
| 1.3.6.1.4.1.1795.2.24.14.3.3.2.1 | CompliancesfpReadWriteCompliance | current | Compliance statement configuring the sfp device. | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.2.2 | CompliancesfpReadOnlyCompliance | current | Compliance statement reading the SFP information. | |
| 1.3.6.1.4.1.1795.2.24.14.3.3.2.3 | CompliancesfpNotificationCompliance | current | Compliance statement sfp device notifications. |