PDN-SPECTRUMMGMT-MIB
47 objects
R.A.Bowhall The Paradyne enterprise SPECTRUM MIB. This MIB is written to facilitate spectrum management of any xDSL interfaces. This mib replaces older versions of the spectrum management including the reachDSL.mib.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex ifType |
| PDN-HEADER-MIB | pdn-interfaces |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.19 | IdentitypdnSpectrumMgmt | R.A.Bowhall The Paradyne enterprise SPECTRUM MIB. This MIB is written to facilitate spectrum management of any xDSL interfaces. This mib replaces older version… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.19.1 | NodepdnSpecMgmtObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.2 | ScalarspectrumMgmtCountryCode | read-write | deprecated | This object selects which Spectrum Management standard will be used on this device to calculate the 'allowed speeds' to comply with Spectrum Management. Note:S… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3 | TablespectrumMgmtTable | not-accessible | deprecated | The Spectrum Management Table. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1 | RowspectrumMgmtEntry | not-accessible | deprecated | An entry in the Spectrum Management table. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.1 | ColumnspectrumMgmtEWL | read-write | deprecated | The Estimated Working Length [EWL(ft)]. The value selected is the estimated length of the line in ft. See the Deployment guideline Table below. This value is u… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.2 | ColumnspectrumMgmtAllowedSpeedsMin1 | read-only | deprecated | This rate will be the Minimum Line Bit Rate based on the Line Length selected. See the Deployment guideline Table above. Example: EWL=12.5 this value may be 80… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.3 | ColumnspectrumMgmtAllowedSpeedsMax1 | read-only | deprecated | This rate will be the Maximum Line Bit Rate based on the Line Length selected See the Deployment guideline Table above. Example: EWL=12.5 this value may be 832… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.4 | ColumnspectrumMgmtAllowedSpeedsMin2 | read-only | deprecated | This rate will be the Minimum Line Bit Rate based on the Line Length selected. See the Deployment guideline Table above. Example: EWL=12.5 this value may be 96… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.5 | ColumnspectrumMgmtAllowedSpeedsMax2 | read-only | deprecated | This rate will be the Maximum Line Bit Rate based on the Line Length selected. See the Deployment guideline Table above. Example: EWL=12.5 this value may be 10… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.1.3.1.6 | ColumnspectrumMgmtLineLength | read-write | deprecated | This 'Line Length' feature is only required if the SpectrumMgmt is Enabled and the spectrumMgmtCountryCode selected is 'UK'. 'Short' Line Length from the excha… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2 | NodepdnNewSpecMgmtObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.1 | TablenewSpectrumMgmtGeneralConfigTable | not-accessible | current | General Configuration of the spectrum management. This table contains an entry for each technology managed by this device. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1 | RownewSpectrumMgmtGeneralConfigEntry | not-accessible | current | An entry with the general spectrum mgmt configuration parameters for a specific DSL technology. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.1 | ColumnnewSpectrumMgmtSelection | read-write | current | This object is used to Enable or Disable Spectrum Management on DSL interfaces managed by this device. Enabling this object limits the DSL speeds on each port … |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.2 | ColumnnewSpectrumMgmtMode | read-only | current | This object restricts the MAX-ACCESS of the 'Selection' object. Following are the details of each of the values: enableOnly(1) - Indicates that the 'Selection'… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.3 | ColumnnewSpectrumMgmtLoopMeasurementMethod | read-only | current | This object indicates the measurement method used in describing the Loop Length of a circuit. Following are the details of each of the options: none(1) - Indic… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.4 | ColumnnewSpectrumMgmtEWLUnits | read-only | current | This object indicates the units of measurement used in describing the Estimated Working Length of a circuit. Following are the details of each of the units: no… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.2 | TablenewSpectrumMgmtConfTable | not-accessible | current | The new Spectrum Management Configuration Table This table is used for configuring spectrum management objects on any DSL interface. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1 | RownewSpectrumMgmtConfEntry | not-accessible | current | An entry in the xDSL Spectrum Management Configuration table. Note: This entry can be accessed only for ifIndex values that belong to a physical interface. e.g… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.1 | ColumnnewSpectrumMgmtConfEWL | read-write | current | The Equivalent Working Length (EWL). The value selected corresponds to the estimated length of the line in feet - if 'EWLUnits' object is 'feet'. meters - if '… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.2 | ColumnnewSpectrumMgmtConfLoopLength | read-write | current | This entry specifies the loop length for the line. The configurable values are short(1), medium(2) and long(3). The 'Loop Length' feature can be used only if t… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.3 | ColumnnewSpectrumMgmtConfQuadMode | read-write | current | This entry specifies the quad cable configuration & length for the line. The configurable values are sameQuad(1), segregatedQuadUpto3km(2) and segregatedQu… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3 | TablenewSpectrumMgmtLineInfoTable | not-accessible | current | The Spectrum Management Line Info Table. This table gives information about the spectrum management ranges that are applicable for each port, based on the spec… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1 | RownewSpectrumMgmtLineInfoEntry | not-accessible | current | An entry in the newSpectrumMgmtLineInfoTable table. Note: This entry can be accessed only for ifIndex values that belong to a physical interface. e.g. for ifTy… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.1 | ColumnnewSpectrumMgmtXtucMax1TxRate | read-only | current | This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUC in a particular spectral compliance confi… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.2 | ColumnnewSpectrumMgmtXtucMin1TxRate | read-only | current | This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUC. The MinTxRate will be upper bounded by 'newSpectrumMgmtXt… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.3 | ColumnnewSpectrumMgmtXtucMax2TxRate | read-only | current | This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUC in a particular spectral compliance confi… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.4 | ColumnnewSpectrumMgmtXtucMin2TxRate | read-only | current | This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUC. The MinTxRate will be upper bounded by 'newSpectrumMgmtXt… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.5 | ColumnnewSpectrumMgmtXtucMaxTxPower | read-only | current | The maximum transmit power at the ATUC (in tenth dB). This value will be based on the spectrum management selection. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.6 | ColumnnewSpectrumMgmtXturMax1TxRate | read-only | current | This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUR in a particular spectral compliance confi… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.7 | ColumnnewSpectrumMgmtXturMin1TxRate | read-only | current | This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUR. The MinTxRate will be upper bounded by 'newSpectrumMgmtXt… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.8 | ColumnnewSpectrumMgmtXturMax2TxRate | read-only | current | This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUR in a particular spectral compliance confi… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.9 | ColumnnewSpectrumMgmtXturMin2TxRate | read-only | current | This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUR. The MinTxRate will be upper bounded by 'newSpectrumMgmtXt… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.10 | ColumnnewSpectrumMgmtXturMaxTxPower | read-only | current | The maximum transmit power at the ATUR (in tenth dB). This value will be based on the spectrum management selection. |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.11 | ColumnnewSpectrumMgmtMinEWL | read-only | current | The minimum value (in feet, if 'EWLUnits' is 'feet, or in meters, if 'EWLUnits' is 'meters') that the 'ConfEWL' object can accept. Together with the 'MaxEWL' o… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.12 | ColumnnewSpectrumMgmtMaxEWL | read-only | current | The maximum value (in feet, if 'EWLUnits' is 'feet, or in meters, if 'EWLUnits' is 'meters') that the 'ConfEWL' object can accept. Together with the 'MinEWL' o… |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3 | NodepdnSpecMgmtConformance | |||
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1 | NodepdnSpecMgmtGroups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1.1 | GrouppdnGeneralConfigGroup | current | A collection of general configuration objects required for the spectrum management of interfaces. | |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1.2 | GrouppdnLineInfoGroup | current | A collection of objects providing information regarding spectrum management of interfaces. | |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1.3 | GrouppdnEWLModeGroup | current | A collection of configuration objects used to control spectrum management of DSL intfs when the measurement method is 'EWL'. | |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1.4 | GrouppdnLoopLengthModeGroup | current | A collection of configuration objects used to control spectrum management of DSL intfs when the measurement method is 'LoopLength' | |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1.5 | GrouppdnQuadModeGroup | current | A collection of object(s) providing configuration access and information specific to DSL interfaces whose loop/line length measurement method is based on the Q… | |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.1.7 | GrouppdnSpectrumMgmtDeprecatedGroup | deprecated | Deprecated objects | |
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.2 | NodepdnSpecMgmtCompliances | |||
| 1.3.6.1.4.1.1795.2.24.2.6.19.3.2.1 | CompliancepdnSpecMgmtCompliance | read-only | current | The compliance statement for SNMP entities that control spectrum management on interfaces. |