PDN-XDSL-INTERFACE-MIB
52 objects
No module-level DESCRIPTION found.
Imported Objects
| PDN-HEADER-MIB | pdn-xdsl |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | ifIndex |
| SNMPv2-TC | Rajesh Gowda IMPORTS DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.9.2 | NodexdslIfConfigMIBObjects | |||
| 1.3.6.1.4.1.1795.2.24.9.2.1 | NodexdslDevGenericIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.9.2.1.1 | TablexdslDevGenericIfConfigTable | not-accessible | mandatory | The xdslDevGenericIfConfigTable provides config information generic to a xDSL device, or system. The table is indexed by an object which corresponds to ifIndex… |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1 | RowxdslDevGenericIfConfigEntry | not-accessible | mandatory | Describes a specific xDSL interface entry. |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.1 | ColumnxdslDevGenericIfConfigPortSpeedBehaviour | read-write | mandatory | The value of this object corresponds to the behaviour of the specified port. The default value for this object is fixed (1). |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.2 | ColumnxdslDevGenericIfConfigMarginThreshold | read-write | mandatory | The value of this object corresponds to the offset from the startup margin. The threshold margin is calculated by subtracting the offset from the startup margi… |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.3 | ColumnxdslDevGenericIfConfigPortID | read-write | mandatory | The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Custom… |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.4 | ColumnxdslDevGenericIfConfigLinkUpDownTransitionThreshold | read-write | mandatory | The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransit… |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.5 | ColumnxdslDevGenericIfConfigLineEncodeType | read-only | mandatory | The value of this object corresponds to the line encoding technology used for data transmission over the the dsl link. |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.6 | ColumnxdslDevGenericIfConfigLineRateMode | read-write | mandatory | The value of this object is used to choose the line rate list for data transmission over the dsl link. The default value is standard(1). |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.7 | ColumnxdslDevGenericIfConfigLinkEncapType | read-write | mandatory | The value of this object corresponds to the link encapsulation type. Following are valid settings: linkNone (1) ethernet (2) ppp (3) slip (4) frameRelay-PLL (5… |
| 1.3.6.1.4.1.1795.2.24.9.2.1.1.1.8 | ColumnxdslDevGenericIfConfigSnType | read-write | mandatory | The value of this object is used to choose a valid Service Node Type to be configured in the port. The configurable values are the object identifiers of the re… |
| 1.3.6.1.4.1.1795.2.24.9.2.2 | NodexdslDevRADSLSpecificIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.9.2.2.1 | TablexdslDevRADSLSpecificIfConfigTable | not-accessible | mandatory | The xdslDevRADSLSpecificIfConfigTable provides config information specific to a xDSL device, or system. The table is indexed by an object which corresponds to … |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1 | RowxdslDevRADSLSpecificIfConfigEntry | not-accessible | mandatory | Describes a specific xDSL interface entry. |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.1 | ColumnxdslDevRADSLSpecificIfConfigUpFixedPortSpeed | read-write | mandatory | The value of this object corresponds to the upstream speed of the specified port for fixed port speed behaviour. All the speeds are in kbps. If the port speed … |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.2 | ColumnxdslDevRADSLSpecificIfConfigDownFixedPortSpeed | read-write | mandatory | The value of this object corresponds to the downstream speed of the specified port for fixed port speed behaviour. All the speeds are in kbps. If the port spee… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.3 | ColumnxdslDevRADSLSpecificIfConfigUpAdaptiveUpperBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound for the upstream port speed of the specified port for adaptive port speed behaviour. The speeds are mea… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.4 | ColumnxdslDevRADSLSpecificIfConfigUpAdaptiveLowerBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the lower bound for the upstream port speed of the specified port for adaptive port speed behaviour in kbps. If the por… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.5 | ColumnxdslDevRADSLSpecificIfConfigDownAdaptiveUpperBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. The spee… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.6 | ColumnxdslDevRADSLSpecificIfConfigDownAdaptiveLowerBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the Minimum lower bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. … |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.7 | ColumnxdslDevRADSLSpecificIfConfigReedSolomonDownFwdErrCorrection | read-write | mandatory | The value of this object corresponds to the Reed-Solomon forward error correction in the downstream direction. The default value of this object should be minim… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.8 | ColumnxdslDevRADSLSpecificIfConfigStartUpMargin | read-write | mandatory | The value of this object corresponds to the startup value of the margin for a DSL interface (specified by ifIndex). The unit is db (decibels. The higher the ma… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.9 | ColumnxdslDevRADSLSpecificIfConfigTxPowerAttenuation | read-write | mandatory | This value corresponds to the Transmitt Power Attenuation in dB for the access node. This value represents the downstream power level in dB. Permissible values… |
| 1.3.6.1.4.1.1795.2.24.9.2.2.1.1.10 | ColumnxdslDevRADSLSpecificIfConfigSnTxPowerAttenuation | read-write | mandatory | This value corresponds to the Transmitt Power Attenuation in dB for the service node. This value represents the upstream power level in dB. Permissible values … |
| 1.3.6.1.4.1.1795.2.24.9.2.3 | NodexdslDevMVLSpecificIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.9.2.3.1 | TablexdslDevMVLSpecificIfConfigTable | not-accessible | mandatory | The xdslDevMVLSpecificIfConfigTable provides config information specific to a xDSL(MVL) device, or system. The table is indexed by an object which corresponds … |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1 | RowxdslDevMVLSpecificIfConfigEntry | not-accessible | mandatory | Describes a specific xDSL(MVL) interface entry. |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.1 | ColumnxdslDevMVLSpecificIfConfigMaxPortSpeed | read-write | deprecated | The value of this object corresponds to the upper bound port speed of the specified port. The speeds are measured in kbps. Prior to GrandSlam 2.3, this object … |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.2 | ColumnxdslDevMVLSpecificIfConfigOnHookTxPowerAttenuation | read-write | mandatory | This value corresponds to the On-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and ups… |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.3 | ColumnxdslDevMVLSpecificIfConfigOffHookTxPowerAttenuation | read-write | mandatory | This value corresponds to the Off-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and up… |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.4 | ColumnxdslDevMVLSpecificIfConfigOnHookPCVoltageDropThresholdValue | read-write | mandatory | This value correspond to the portcard Voltage Drop Threshold Value and valid settings are 0 and 6. If the corresponding value at the endpoint is set for Max (2… |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.5 | ColumnxdslDevMVLSpecificIfConfigOnHookSNVoltageDropThresholdValue | read-write | mandatory | This corresponds to the endpoint Voltage Drop Threshold Value and valid settings are 17, 34 and 255(Max). If Reach is used than only valid value is 34 - defaul… |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.6 | ColumnxdslDevMVLSpecificIfConfigMaxDownStreamPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound downstream port speed of the specified port. The speeds are measured in kbps. Setting the value of this… |
| 1.3.6.1.4.1.1795.2.24.9.2.3.1.1.7 | ColumnxdslDevMVLSpecificIfConfigMaxUpStreamPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound upstream port speed of the specified port. The speeds are measured in kbps. Prior to GrandSlam 2.3, the… |
| 1.3.6.1.4.1.1795.2.24.9.2.4 | NodexdslDevSDSLSpecificIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.9.2.4.1 | TablexdslDevSDSLSpecificIfConfigTable | not-accessible | mandatory | The xdslDevSDSLSpecificIfConfigTable provides configuration specific to the SDSL link. |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1 | RowxdslDevSDSLSpecificIfConfigEntry | not-accessible | mandatory | Describes a specific SDSL configuration entry. |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1.1 | ColumnxdslDevSDSLSpecificIfConfigFixedPortSpeed | read-write | mandatory | The value of this object corresponds to both upstream and downstream speed of the specified port. All the speeds are in kbps. The value of this object is used … |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1.2 | ColumnxdslDevSDSLSpecificIfConfigMaxPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound port speed of the specified port when the port behaviour is adaptive. The speeds are measured in kbps. |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1.3 | ColumnxdslDevSDSLSpecificIfConfigFixedPortSpeedNx128Mode | read-write | mandatory | The value of this object applies to both upstream and downstream speed of the specified port when the line rate mode is configured as Nx128 mode. All the speed… |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1.4 | ColumnxdslDevSDSLSpecificIfConfigMaxPortSpeedNx128Mode | read-write | mandatory | The value of this object corresponds to the upper bound port speed of the specified port when the port behaviour is adaptive and the line rate is Nx128 mode, a… |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1.5 | ColumnxdslDevSDSLSpecificIfConfigMinSnrMargin | read-write | mandatory | Configured Minimum acceptable Signal/Noise Margin. |
| 1.3.6.1.4.1.1795.2.24.9.2.4.1.1.6 | ColumnxdslDevSDSLSpecificIfConfigTargetSnrMargin | read-write | mandatory | Configured Target Signal/Noise Margin. |
| 1.3.6.1.4.1.1795.2.24.9.2.5 | NodexdslDevIDSLSpecificIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.9.2.5.1 | TablexdslDevIDSLSpecificIfConfigTable | not-accessible | mandatory | The xdslDevIDSLSpecificIfConfigTable provides configuration specific to the IDSL link. |
| 1.3.6.1.4.1.1795.2.24.9.2.5.1.1 | RowxdslDevIDSLSpecificIfConfigEntry | not-accessible | mandatory | Describes a specific IDSL configuration entry. |
| 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.1 | ColumnxdslDevIDSLSpecificIfConfigPortSpeed | read-write | mandatory | The value of this object corresponds to both upstream and downstream speed of the specified port. All the speeds are in kbps. Allowed speeds are 64, 128 and 14… |
| 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2 | ColumnxdslDevIDSLSpecificIfConfigTimingPortTransceiverMode | read-write | mandatory | The transceiver mode selected on the timing source port. Only one IDSL port can be set to NT mode. This timing will then be distributed to all other IDSL ports… |
| 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.3 | ColumnxdslDevIDSLSpecificChannel | read-write | mandatory | The channel type for 64 Kbps. Default value is B1. |
| 1.3.6.1.4.1.1795.2.24.9.4 | NodexdslIfConfigMIBTraps | |||
| 1.3.6.1.4.1.1795.2.24.9.4.1 | NodexdslLinkUpDownTransitions | This trap signifies that the sending protocol entity recognizes that one of the xDSL communication links is in a fluctuating state. |