PDUSNMP
607 objects
IPT SNMP PDU MIB definition
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.38218 | Nodeipt-pdu-SNMP | |||
| 1.3.6.1.4.1.38218.1 | Identitypdu-SNMP | IPT SNMP PDU MIB definition | ||
| 1.3.6.1.4.1.38218.1.1 | Nodeslave-SiteTotals | |||
| 1.3.6.1.4.1.38218.1.1.1 | Scalarslave-SiteTotalkWh | read-only | current | Total Energy used by all slaves on site in kWh x10. |
| 1.3.6.1.4.1.38218.1.1.2 | Scalarslave-SiteTotalBtu | read-only | current | Total Energy used by all slaves on site in Btu x10. |
| 1.3.6.1.4.1.38218.1.1.3 | Scalarslave-SiteTotalKgCO2 | read-only | current | Total Energy used by all slaves on site in KgCO2 x10. |
| 1.3.6.1.4.1.38218.1.2 | Nodeslave-Server | |||
| 1.3.6.1.4.1.38218.1.2.1 | Scalarslave-Nopdus | read-only | current | Compatible - Number of pdu's connected in SLAVE mode |
| 1.3.6.1.4.1.38218.1.2.2 | Scalarslaves-Online | read-only | current | Compatible - Number of pdu's ONLINE in SLAVE mode. |
| 1.3.6.1.4.1.38218.1.2.3 | Scalarslave-ServerStatus | read-only | current | Compatible - Server status |
| 1.3.6.1.4.1.38218.1.3 | Nodepdu-Configuration | |||
| 1.3.6.1.4.1.38218.1.3.1 | Scalarpdu-ClientName | read-write | current | Compatible - pdu Client name. |
| 1.3.6.1.4.1.38218.1.3.2 | Scalarpdu-LocationName | read-write | current | Compatible - pdu Location Name. |
| 1.3.6.1.4.1.38218.1.3.3 | Scalarpdu-FirmwareVersion | read-only | current | Compatible - pdu firmware version. |
| 1.3.6.1.4.1.38218.1.3.4 | Scalarpdu-KgCO2Conversion | read-write | current | Compatible - KgCO2 conversion factor x1000 [544 = 0.544] |
| 1.3.6.1.4.1.38218.1.3.5 | Scalarpdu-MODBUSTimeout | read-write | current | Compatible - MODBUS Timeout in mS. |
| 1.3.6.1.4.1.38218.1.3.6 | Scalarpdu-MODBUSRetry | read-write | current | Compatible - MODBUS Retry value. |
| 1.3.6.1.4.1.38218.1.3.7 | Scalarpdu-NotUsed1 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.1.3.8 | Scalarpdu-AlarmPeriod | read-write | current | Compatible - Alarm period check in minutes. |
| 1.3.6.1.4.1.38218.1.3.9 | Scalarpdu-DHCPStatus | read-write | current | Compatible - DHCP Enable.Set to 1 to ENABLE or 0 to DISABLE DHCP support. |
| 1.3.6.1.4.1.38218.1.3.10 | Scalarpdu-IPAddress | read-write | current | Compatible - pdu IP Address. |
| 1.3.6.1.4.1.38218.1.3.11 | Scalarpdu-SubNetMask | read-write | current | Compatible - pdu Sub-net mask. |
| 1.3.6.1.4.1.38218.1.3.12 | Scalarpdu-CabinetID | read-write | current | pdu Cabinet ID. |
| 1.3.6.1.4.1.38218.1.3.13 | Scalarpdu-socketPeriod | read-write | current | pdu socket ON sequence period (mS) 0=OFF. |
| 1.3.6.1.4.1.38218.1.3.14 | Scalarpdu-LockPeriod | read-write | current | pdu Lock activation period (S). |
| 1.3.6.1.4.1.38218.1.3.15 | Scalarpdu-RTC-Hour | read-write | current | pdu RTC Hour [24 hour clock]. |
| 1.3.6.1.4.1.38218.1.3.16 | Scalarpdu-RTC-Minute | read-write | current | pdu RTC Minute. |
| 1.3.6.1.4.1.38218.1.3.17 | Scalarpdu-RTC-Date | read-write | current | pdu RTC Date. |
| 1.3.6.1.4.1.38218.1.3.18 | Scalarpdu-RTC-Month | read-write | current | pdu RTC Month. |
| 1.3.6.1.4.1.38218.1.3.19 | Scalarpdu-RTC-Year | read-write | current | pdu RTC Year [tens only]. |
| 1.3.6.1.4.1.38218.1.4 | Nodetrap-Destinations | |||
| 1.3.6.1.4.1.38218.1.4.1 | TabletrapDestinationsTable | not-accessible | current | |
| 1.3.6.1.4.1.38218.1.4.1.1 | RowtrapDestinationsEntry | not-accessible | current | Table of Trap notification destinations. |
| 1.3.6.1.4.1.38218.1.4.1.1.1 | ColumntrapDestinationsIndex | not-accessible | current | Trap destination index [0..1]. |
| 1.3.6.1.4.1.38218.1.4.1.1.2 | ColumntrapDestinationsStatus | read-write | current | Trap destination status. Set to 1 to ENABLE or 0 to DISABLE trap destination. |
| 1.3.6.1.4.1.38218.1.4.1.1.3 | ColumntrapDestinationsIP | read-write | current | Trap destination IP address. Set to the IP address of the destination SNMP manager. |
| 1.3.6.1.4.1.38218.1.4.1.1.4 | ColumntrapDestinationsCommunity | read-write | current | Trap destination SNMP community. Set to the community name to be used with the destination SNMP manager. |
| 1.3.6.1.4.1.38218.1.5 | Nodepdu-Information | |||
| 1.3.6.1.4.1.38218.1.5.1 | Scalarpdu-Firmware | read-only | current | pdu Firmware version. |
| 1.3.6.1.4.1.38218.1.5.2 | Scalarpdu-Nosockets | read-only | current | pdu Number of sockets. |
| 1.3.6.1.4.1.38218.1.5.3 | Scalarpdu-ProductName | read-only | current | pdu Product name. |
| 1.3.6.1.4.1.38218.1.5.4 | Scalarpdu-SerialNumber | read-only | current | pdu Serial number. |
| 1.3.6.1.4.1.38218.1.6 | Nodepdu-Meters | |||
| 1.3.6.1.4.1.38218.1.6.1 | Scalarpdu-meter1-VRMS | read-only | current | pdu Meter 1 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.1.6.2 | Scalarpdu-meter1-IRMS | read-only | current | pdu Meter 1 RMS Current (A) x100. |
| 1.3.6.1.4.1.38218.1.6.3 | Scalarpdu-meter1-KWH | read-only | current | pdu Meter 1 total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.1.6.4 | Scalarpdu-meter1-KW | read-only | current | pdu Meter 1 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.1.6.5 | Scalarpdu-meter1-TPMU | read-only | current | pdu Meter 1 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.1.6.6 | Scalarpdu-meter1-IPK | read-only | current | pdu Meter 1 Peak Current (A) x10. |
| 1.3.6.1.4.1.38218.1.6.7 | Scalarpdu-meter1-VPK | read-only | current | pdu Meter 1 Peak Voltage (V) x10. |
| 1.3.6.1.4.1.38218.1.6.8 | Scalarpdu-meter1-PF | read-only | current | pdu Meter 1 Power Factor x1000 |
| 1.3.6.1.4.1.38218.1.6.9 | Scalarpdu-meter1-Freq | read-only | current | pdu Meter 1 Frequency x10 |
| 1.3.6.1.4.1.38218.1.6.10 | Scalarpdu-meter2-VRMS | read-only | current | pdu Meter 2 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.1.6.11 | Scalarpdu-meter2-IRMS | read-only | current | pdu Meter 2 RMS Current (A) x100. |
| 1.3.6.1.4.1.38218.1.6.12 | Scalarpdu-meter2-KWH | read-only | current | pdu Meter 2 total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.1.6.13 | Scalarpdu-meter2-KW | read-only | current | pdu Meter 2 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.1.6.14 | Scalarpdu-meter2-TPMU | read-only | current | pdu Meter 2 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.1.6.15 | Scalarpdu-meter2-IPK | read-only | current | pdu Meter 2 Peak Current (A) x10. |
| 1.3.6.1.4.1.38218.1.6.16 | Scalarpdu-meter2-VPK | read-only | current | pdu Meter 2 Peak Voltage (V) x10. |
| 1.3.6.1.4.1.38218.1.6.17 | Scalarpdu-meter2-PF | read-only | current | pdu Meter 2 Power Factor x1000 |
| 1.3.6.1.4.1.38218.1.6.18 | Scalarpdu-meter2-Freq | read-only | current | pdu Meter 2 Frequency x10 |
| 1.3.6.1.4.1.38218.1.6.19 | Scalarpdu-meter3-VRMS | read-only | current | pdu Meter 3 RMS Voltage (VAC) x100. |
| 1.3.6.1.4.1.38218.1.6.20 | Scalarpdu-meter3-IRMS | read-only | current | pdu Meter 3 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.1.6.21 | Scalarpdu-meter3-KWH | read-only | current | pdu Meter 3 total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.1.6.22 | Scalarpdu-meter3-KW | read-only | current | pdu Meter 3 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.1.6.23 | Scalarpdu-meter3-TPMU | read-only | current | pdu Meter 3 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.1.6.24 | Scalarpdu-meter3-IPK | read-only | current | pdu Meter 3 Peak Current (A) x10. |
| 1.3.6.1.4.1.38218.1.6.25 | Scalarpdu-meter3-VPK | read-only | current | pdu Meter 3 Peak Voltage (V) x10. |
| 1.3.6.1.4.1.38218.1.6.26 | Scalarpdu-meter3-PF | read-only | current | pdu Meter 3 Power Factor x1000 |
| 1.3.6.1.4.1.38218.1.6.27 | Scalarpdu-meter3-Freq | read-only | current | pdu Meter 3 Frequency x10 |
| 1.3.6.1.4.1.38218.1.7 | Nodepdu-sockets | |||
| 1.3.6.1.4.1.38218.1.7.1 | Tablepdu-socketsTable | not-accessible | current | |
| 1.3.6.1.4.1.38218.1.7.1.1 | Rowpdu-socketsEntry | not-accessible | current | Table of socket status parameters. |
| 1.3.6.1.4.1.38218.1.7.1.1.1 | Columnsocket-Index | not-accessible | current | socket index |
| 1.3.6.1.4.1.38218.1.7.1.1.2 | Columnsocket-Number | read-only | current | socket number [Range 1 to 48] |
| 1.3.6.1.4.1.38218.1.7.1.1.3 | Columnsocket-Equipment | read-write | current | socket equipment name. |
| 1.3.6.1.4.1.38218.1.7.1.1.4 | Columnsocket-ONOFF | read-write | current | socket ON/OFF status [Set to 1 to switch ON, 0 to switch OFF] |
| 1.3.6.1.4.1.38218.1.7.1.1.5 | Columnsocket-AMPS | read-only | current | socket current (Amps) x10. |
| 1.3.6.1.4.1.38218.1.7.1.1.6 | Columnsocket-KWH | read-write | current | socket Energy (kWh) x10. |
| 1.3.6.1.4.1.38218.1.7.1.1.7 | Columnsocket-INFO | read-only | current | socket information (status, phase and picture). |
| 1.3.6.1.4.1.38218.1.8 | Nodepdu-Environmental | |||
| 1.3.6.1.4.1.38218.1.8.1 | Scalarpdu-environmental-Temp1 | read-only | current | Environmental Temperature probe 1 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.2 | Scalarpdu-environmental-Temp1-Location | read-write | current | Environmental Temperature probe 1 location name. |
| 1.3.6.1.4.1.38218.1.8.3 | Scalarpdu-environmental-Temp2 | read-only | current | Environmental Temperature probe 2 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.4 | Scalarpdu-environmental-Temp2-Location | read-write | current | Environmental Temperature probe 2 location name. |
| 1.3.6.1.4.1.38218.1.8.5 | Scalarpdu-environmental-Temp3 | read-only | current | Environmental Temperature probe 3 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.6 | Scalarpdu-environmental-Temp3-Location | read-write | current | Environmental Temperature probe 3 location name. |
| 1.3.6.1.4.1.38218.1.8.7 | Scalarpdu-environmental-Temp4 | read-only | current | Environmental Temperature probe 4 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.8 | Scalarpdu-environmental-Temp4-Location | read-write | current | Environmental Temperature probe 4 location name. |
| 1.3.6.1.4.1.38218.1.8.9 | Scalarpdu-environmental-Temp5 | read-only | current | Environmental Temperature probe 5 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.10 | Scalarpdu-environmental-Temp5-Location | read-write | current | Environmental Temperature probe 5 location name. |
| 1.3.6.1.4.1.38218.1.8.11 | Scalarpdu-environmental-Temp6 | read-only | current | Environmental Temperature probe 6 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.12 | Scalarpdu-environmental-Temp6-Location | read-write | current | Environmental Temperature probe 6 location name. |
| 1.3.6.1.4.1.38218.1.8.13 | Scalarpdu-environmental-Temp7 | read-only | current | Environmental Temperature probe 7 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.14 | Scalarpdu-environmental-Temp7-Location | read-write | current | Environmental Temperature probe 7 location name. |
| 1.3.6.1.4.1.38218.1.8.15 | Scalarpdu-environmental-Temp8 | read-only | current | Environmental Temperature probe 8 (C) x100. |
| 1.3.6.1.4.1.38218.1.8.16 | Scalarpdu-environmental-Temp8-Location | read-write | current | Environmental Temperature probe 8 location name. |
| 1.3.6.1.4.1.38218.1.8.17 | Scalarpdu-environmental-HumidityTemp | read-only | current | Environmental Humidity probe Temperature (C) x100. |
| 1.3.6.1.4.1.38218.1.8.18 | Scalarpdu-environmental-Humidity | read-only | current | Environmental humidity probe (%) x100. |
| 1.3.6.1.4.1.38218.1.8.19 | Scalarpdu-environmental-Contact1 | read-only | current | Environmental contact input 1 status. |
| 1.3.6.1.4.1.38218.1.8.20 | Scalarpdu-environmental-Contact1-Location | read-write | current | Environmental contact input 1 location name. |
| 1.3.6.1.4.1.38218.1.8.21 | Scalarpdu-environmental-Contact2 | read-only | current | Environmental contact input 2 status. |
| 1.3.6.1.4.1.38218.1.8.22 | Scalarpdu-environmental-Contact2-Location | read-write | current | Environmental contact input 2 location name. |
| 1.3.6.1.4.1.38218.1.8.23 | Scalarpdu-environmental-Contact3 | read-only | current | Environmental contact input 3 status. |
| 1.3.6.1.4.1.38218.1.8.24 | Scalarpdu-environmental-Contact3-Location | read-write | current | Environmental contact input 3 location name. |
| 1.3.6.1.4.1.38218.1.9 | Nodepdu-Security | |||
| 1.3.6.1.4.1.38218.1.9.1 | Scalarpdu-Security-Door | read-only | current | Security door contact status. |
| 1.3.6.1.4.1.38218.1.9.2 | Scalarpdu-Security-Lock | read-write | current | Security lock status [Set to 1 to unlock] |
| 1.3.6.1.4.1.38218.1.9.3 | Scalarpdu-Security-Wild | read-write | current | Security Card/PIN Wildcard status. Set with 1 to enable or 0 to disable Wildcard feature. |
| 1.3.6.1.4.1.38218.1.9.4 | Scalarpdu-Security-UnlockTimeDate | read-only | current | Time and data of last unlock. |
| 1.3.6.1.4.1.38218.1.9.5 | Tablepdu-SecurityTable | not-accessible | current | |
| 1.3.6.1.4.1.38218.1.9.5.1 | Rowpdu-SecurityEntry | not-accessible | current | Table of pdu- Card/PIN codes. |
| 1.3.6.1.4.1.38218.1.9.5.1.1 | Columnpdu-Security-Index | not-accessible | current | Security Card/PIN code index. |
| 1.3.6.1.4.1.38218.1.9.5.1.2 | Columnpdu-Security-Code | read-write | current | Security Card/PIN number. |
| 1.3.6.1.4.1.38218.1.10 | Nodepdu-Logs | |||
| 1.3.6.1.4.1.38218.1.10.1 | Scalarpdu-Logs-Number | read-only | current | Log file number of log lines stored. |
| 1.3.6.1.4.1.38218.1.10.2 | Scalarpdu-Logs-Index | read-write | current | Log file line index pointer. Set to line to be read. |
| 1.3.6.1.4.1.38218.1.10.3 | Scalarpdu-Logs-Data | read-only | current | Log file log line data. |
| 1.3.6.1.4.1.38218.1.10.4 | Scalarpdu-Logs-Clear | read-write | current | Log file clear. Set with 1 to clear log file. |
| 1.3.6.1.4.1.38218.1.11 | Nodepdu-Traps | |||
| 1.3.6.1.4.1.38218.1.11.1 | Nodepdu-TrapThresholds | |||
| 1.3.6.1.4.1.38218.1.11.1.1 | Scalarmeter1-VRMSLowAlarm | read-write | current | Meter 1 Voltage LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.2 | Scalarmeter1-VRMSLow | read-write | current | eter 1 Voltage LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.3 | Scalarmeter1-VRMSHighAlarm | read-write | current | Meter 1 Voltage HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.4 | Scalarmeter1-VRMSHigh | read-write | current | Meter 1 Voltage HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.5 | Scalarmeter1-IRMSLowAlarm | read-write | current | Meter 1 Current LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.6 | Scalarmeter1-IRMSLow | read-write | current | Meter 1 Current LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.7 | Scalarmeter1-IRMSHighAlarm | read-write | current | Meter 1 Current HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.8 | Scalarmeter1-IRMSHigh | read-write | current | Meter 1 Current HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.9 | Scalarmeter1-KWSLowAlarm | read-write | current | Meter 1 Kilowatts LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.10 | Scalarmeter1-KWSLow | read-write | current | Meter 1 Kilowatts LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.11 | Scalarmeter1-KWSHighAlarm | read-write | current | Meter 1 Kilowatts HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.12 | Scalarmeter1-KWSHigh | read-write | current | Meter 1 Kilowatts HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.13 | Scalarmeter1-TempLowAlarm | read-write | current | Meter 1 Internal temperature LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.14 | Scalarmeter1-TempLow | read-write | current | Meter 1 Internal temperature LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.15 | Scalarmeter1-TempHighAlarm | read-write | current | Meter 1 Internal temperature HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.16 | Scalarmeter1-TempHigh | read-write | current | Meter 1 Internal temperature HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.17 | Scalarmeter1-PFLowAlarm | read-write | current | Meter 1 Power factor LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.18 | Scalarmeter1-PFLow | read-write | current | Meter 1 Power factor LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.19 | Scalarmeter1-PFHighAlarm | read-write | current | Meter 1 Power factor HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.20 | Scalarmeter1-PFHigh | read-write | current | Meter 1 Power factor HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.21 | Scalarmeter1-FreqLowAlarm | read-write | current | Meter 1 Frequency LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.22 | Scalarmeter1-FreqLow | read-write | current | Meter 1 Frequency LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.23 | Scalarmeter1-FreqHighAlarm | read-write | current | Meter 1 Frequency HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.24 | Scalarmeter1-FreqHigh | read-write | current | Meter 1 Frequency HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.25 | Scalarmeter2-VRMSLowAlarm | read-write | current | Meter 2 Voltage LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.26 | Scalarmeter2-VRMSLow | read-write | current | eter 1 Voltage LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.27 | Scalarmeter2-VRMSHighAlarm | read-write | current | Meter 2 Voltage HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.28 | Scalarmeter2-VRMSHigh | read-write | current | Meter 2 Voltage HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.29 | Scalarmeter2-IRMSLowAlarm | read-write | current | Meter 2 Current LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.30 | Scalarmeter2-IRMSLow | read-write | current | Meter 2 Current LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.31 | Scalarmeter2-IRMSHighAlarm | read-write | current | Meter 2 Current HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.32 | Scalarmeter2-IRMSHigh | read-write | current | Meter 2 Current HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.33 | Scalarmeter2-KWSLowAlarm | read-write | current | Meter 2 Kilowatts LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.34 | Scalarmeter2-KWSLow | read-write | current | Meter 2 Kilowatts LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.35 | Scalarmeter2-KWSHighAlarm | read-write | current | Meter 2 Kilowatts HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.36 | Scalarmeter2-KWSHigh | read-write | current | Meter 2 Kilowatts HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.37 | Scalarmeter2-TempLowAlarm | read-write | current | Meter 2 Internal temperature LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.38 | Scalarmeter2-TempLow | read-write | current | Meter 2 Internal temperature LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.39 | Scalarmeter2-TempHighAlarm | read-write | current | Meter 2 Internal temperature HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.40 | Scalarmeter2-TempHigh | read-write | current | Meter 2 Internal temperature HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.41 | Scalarmeter2-PFLowAlarm | read-write | current | Meter 2 Power factor LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.42 | Scalarmeter2-PFLow | read-write | current | Meter 2 Power factor LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.43 | Scalarmeter2-PFHighAlarm | read-write | current | Meter 2 Power factor HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.44 | Scalarmeter2-PFHigh | read-write | current | Meter 2 Power factor HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.45 | Scalarmeter2-FreqLowAlarm | read-write | current | Meter 2 Frequency LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.46 | Scalarmeter2-FreqLow | read-write | current | Meter 2 Frequency LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.47 | Scalarmeter2-FreqHighAlarm | read-write | current | Meter 2 Frequency HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.48 | Scalarmeter2-FreqHigh | read-write | current | Meter 2 Frequency HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.49 | Scalarmeter3-VRMSLowAlarm | read-write | current | Meter 3 Voltage LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.50 | Scalarmeter3-VRMSLow | read-write | current | eter 1 Voltage LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.51 | Scalarmeter3-VRMSHighAlarm | read-write | current | Meter 3 Voltage HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.52 | Scalarmeter3-VRMSHigh | read-write | current | Meter 3 Voltage HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.53 | Scalarmeter3-IRMSLowAlarm | read-write | current | Meter 3 Current LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.54 | Scalarmeter3-IRMSLow | read-write | current | Meter 3 Current LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.55 | Scalarmeter3-IRMSHighAlarm | read-write | current | Meter 3 Current HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.56 | Scalarmeter3-IRMSHigh | read-write | current | Meter 3 Current HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.57 | Scalarmeter3-KWSLowAlarm | read-write | current | Meter 3 Kilowatts LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.58 | Scalarmeter3-KWSLow | read-write | current | Meter 3 Kilowatts LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.59 | Scalarmeter3-KWSHighAlarm | read-write | current | Meter 3 Kilowatts HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.60 | Scalarmeter3-KWSHigh | read-write | current | Meter 3 Kilowatts HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.61 | Scalarmeter3-TempLowAlarm | read-write | current | Meter 3 Internal temperature LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.62 | Scalarmeter3-TempLow | read-write | current | Meter 3 Internal temperature LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.63 | Scalarmeter3-TempHighAlarm | read-write | current | Meter 3 Internal temperature HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.64 | Scalarmeter3-TempHigh | read-write | current | Meter 3 Internal temperature HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.65 | Scalarmeter3-PFLowAlarm | read-write | current | Meter 3 Power factor LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.66 | Scalarmeter3-PFLow | read-write | current | Meter 3 Power factor LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.67 | Scalarmeter3-PFHighAlarm | read-write | current | Meter 3 Power factor HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.68 | Scalarmeter3-PFHigh | read-write | current | Meter 3 Power factor HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.69 | Scalarmeter3-FreqLowAlarm | read-write | current | Meter 3 Frequency LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.70 | Scalarmeter3-FreqLow | read-write | current | Meter 3 Frequency LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.71 | Scalarmeter3-FreqHighAlarm | read-write | current | Meter 3 Frequency HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.72 | Scalarmeter3-FreqHigh | read-write | current | Meter 3 Frequency HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.73 | Tablesocket-ThresholdsTable | not-accessible | current | |
| 1.3.6.1.4.1.38218.1.11.1.73.1 | Rowsocket-ThresholdsEntry | not-accessible | current | Table of socket trap notification thresholds. |
| 1.3.6.1.4.1.38218.1.11.1.73.1.1 | Columnsocket-ThresholdsNumber | not-accessible | current | Trap threshold socket- number [1..48]. |
| 1.3.6.1.4.1.38218.1.11.1.73.1.2 | Columnsocket-AMPSLowAlarm | read-write | current | socket Current LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.73.1.3 | Columnsocket-AMPSLow | read-write | current | socket Current LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.73.1.4 | Columnsocket-AMPSHighAlarm | read-write | current | socket Current HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.73.1.5 | Columnsocket-AMPSHigh | read-write | current | socket Current HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.74 | Scalarenvironmental-Temp1LowAlarm | read-write | current | Environmental temperature probe 1 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.75 | Scalarenvironmental-Temp1Low | read-write | current | Environmental temperature probe 1 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.76 | Scalarenvironmental-Temp1HighAlarm | read-write | current | Environmental temperature probe 1 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.77 | Scalarenvironmental-Temp1High | read-write | current | Environmental temperature probe 1 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.78 | Scalarenvironmental-Temp2LowAlarm | read-write | current | Environmental temperature probe 2 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.79 | Scalarenvironmental-Temp2Low | read-write | current | Environmental temperature probe 2 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.80 | Scalarenvironmental-Temp2HighAlarm | read-write | current | Environmental temperature probe 2 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.81 | Scalarenvironmental-Temp2High | read-write | current | Environmental temperature probe 2 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.82 | Scalarenvironmental-Temp3LowAlarm | read-write | current | Environmental temperature probe 3 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.83 | Scalarenvironmental-Temp3Low | read-write | current | Environmental temperature probe 3 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.84 | Scalarenvironmental-Temp3HighAlarm | read-write | current | Environmental temperature probe 3 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.85 | Scalarenvironmental-Temp3High | read-write | current | Environmental temperature probe 3 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.86 | Scalarenvironmental-Temp4LowAlarm | read-write | current | Environmental temperature probe 4 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.87 | Scalarenvironmental-Temp4Low | read-write | current | Environmental temperature probe 4 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.88 | Scalarenvironmental-Temp4HighAlarm | read-write | current | Environmental temperature probe 4 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.89 | Scalarenvironmental-Temp4High | read-write | current | Environmental temperature probe 4 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.90 | Scalarenvironmental-Temp5LowAlarm | read-write | current | Environmental temperature probe 5 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.91 | Scalarenvironmental-Temp5Low | read-write | current | Environmental temperature probe 5 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.92 | Scalarenvironmental-Temp5HighAlarm | read-write | current | Environmental temperature probe 5 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.93 | Scalarenvironmental-Temp5High | read-write | current | Environmental temperature probe 5 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.94 | Scalarenvironmental-Temp6LowAlarm | read-write | current | Environmental temperature probe 6 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.95 | Scalarenvironmental-Temp6Low | read-write | current | Environmental temperature probe 6 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.96 | Scalarenvironmental-Temp6HighAlarm | read-write | current | Environmental temperature probe 6 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.97 | Scalarenvironmental-Temp6High | read-write | current | Environmental temperature probe 6 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.98 | Scalarenvironmental-Temp7LowAlarm | read-write | current | Environmental temperature probe 7 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.99 | Scalarenvironmental-Temp7Low | read-write | current | Environmental temperature probe 7 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.100 | Scalarenvironmental-Temp7HighAlarm | read-write | current | Environmental temperature probe 7 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.101 | Scalarenvironmental-Temp7High | read-write | current | Environmental temperature probe 7 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.102 | Scalarenvironmental-Temp8LowAlarm | read-write | current | Environmental temperature probe 8 LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.103 | Scalarenvironmental-Temp8Low | read-write | current | Environmental temperature probe 8 LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.104 | Scalarenvironmental-Temp8HighAlarm | read-write | current | Environmental temperature probe 8 HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.105 | Scalarenvironmental-Temp8High | read-write | current | Environmental temperature probe 8 HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.106 | Scalarenvironmental-HumidityTempLowAlarm | read-write | current | Environmental humidity probe temperature LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.107 | Scalarenvironmental-HumidityTempLow | read-write | current | Environmental humidity probe temperature LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.108 | Scalarenvironmental-HumidityTempHighAlarm | read-write | current | Environmental humidity probe temperature HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.109 | Scalarenvironmental-HumidityTempHigh | read-write | current | Environmental humidity probe temperature HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.110 | Scalarenvironmental-HumidityLowAlarm | read-write | current | Environmental humidity probe LOW alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.111 | Scalarenvironmental-HumidityLow | read-write | current | Environmental humidity probe LOW trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.112 | Scalarenvironmental-HumidityHighAlarm | read-write | current | Environmental humidity probe HIGH alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.113 | Scalarenvironmental-HumidityHigh | read-write | current | Environmental humidity probe HIGH trap threshold x10. |
| 1.3.6.1.4.1.38218.1.11.1.114 | Scalarenvironmental-Contact1OpenedAlarm | read-write | current | Environmental Contact 1 OPENED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.115 | Scalarenvironmental-Contact1ClosedAlarm | read-write | current | Environmental Contact 1 CLOSED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.116 | Scalarenvironmental-Contact2OpenedAlarm | read-write | current | Environmental Contact 2 OPENED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.117 | Scalarenvironmental-Contact2ClosedAlarm | read-write | current | Environmental Contact 2 CLOSED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.118 | Scalarenvironmental-Contact3OpenedAlarm | read-write | current | Environmental Contact 3 OPENED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.119 | Scalarenvironmental-Contact3ClosedAlarm | read-write | current | Environmental Contact 3 CLOSED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.120 | Scalarsecurity-DoorOpenedAlarm | read-write | current | Security Door OPENED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.121 | Scalarsecurity-DoorClosedAlarm | read-write | current | Security Door CLOSED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.122 | Scalarsecurity-LockUnlockedAlarm | read-write | current | Security Lock UNLOCKED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.1.11.1.123 | Scalarsecurity-LockLockedAlarm | read-write | current | Security Lock LOCKED alarm disabled/enabled. |
| 1.3.6.1.4.1.38218.2 | Nodeslave-pdus | |||
| 1.3.6.1.4.1.38218.2.1 | Scalarslave-slaveSelected | read-write | current | Compatible - Currently selected slave pdu. Set to number between 1 and slave-Nopdus |
| 1.3.6.1.4.1.38218.2.2 | Nodeslave-Information | |||
| 1.3.6.1.4.1.38218.2.2.1 | Scalarslave-pduName | read-only | current | Compatible - slave pdu Name. |
| 1.3.6.1.4.1.38218.2.2.2 | Scalarslave-pduStatus | read-write | current | Compatible - slave pdu ONLINE / OFFLINE or DISABLED status. |
| 1.3.6.1.4.1.38218.2.2.3 | Scalarslave-pduAddress | read-only | current | Compatible - slave pdu MODBUS Address. |
| 1.3.6.1.4.1.38218.2.2.4 | Scalarslave-pduFirmware | read-only | current | Compatible - slave pdu Firmware version. |
| 1.3.6.1.4.1.38218.2.2.5 | Scalarslave-Info-NotUsed2 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.2.6 | Scalarslave-pduNosockets | read-only | current | Compatible - slave pdu Number of sockets. |
| 1.3.6.1.4.1.38218.2.2.7 | Scalarslave-Info-NotUsed3 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.2.8 | Scalarslave-Info-NotUsed4 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.2.9 | Scalarslave-Info-pduReset | read-write | current | Compatible - slave pdu Reset. |
| 1.3.6.1.4.1.38218.2.2.10 | Scalarslave-Info-pdukWhReset | read-write | current | Compatible - slave pdu Reset energy. |
| 1.3.6.1.4.1.38218.2.3 | Nodeslave-Status | |||
| 1.3.6.1.4.1.38218.2.3.1 | Scalarslave-meter1-VRMS | read-write | current | Compatible - slave Meter 1 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.2.3.2 | Scalarslave-meter1-IRMS | read-only | current | Compatible - slave Meter 1 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.2.3.3 | Scalarslave-meter1-KWH | read-only | current | Compatible - slave Meter 1 total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.2.3.4 | Scalarslave-meter1-KW | read-only | current | Compatible - slave Meter 1 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.2.3.5 | Scalarslave-meter1-TPMU | read-only | current | Compatible - slave Meter 1 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.2.3.6 | Scalarslave-Status-NotUsed1 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.3.7 | Scalarslave-Status-NotUsed2 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.3.8 | Scalarslave-meter1-IPK | read-only | current | Compatible - slave Meter 1 Peak Current (A) x10. |
| 1.3.6.1.4.1.38218.2.3.9 | Scalarslave-meter1-VPK | read-only | current | Compatible - slave Meter 1 Peak Voltage (V) x10. |
| 1.3.6.1.4.1.38218.2.3.10 | Scalarslave-meter1-PF | read-only | current | Compatible - slave Meter 1 Power Factor x1000 |
| 1.3.6.1.4.1.38218.2.3.11 | Scalarslave-Status-NotUsed3 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.3.12 | Scalarslave-Status-NotUsed4 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.3.13 | Scalarslave-Status-NotUsed5 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.3.14 | Scalarslave-meter1-Freq | read-only | current | Compatible - slave Meter 1 Frequency x10 |
| 1.3.6.1.4.1.38218.2.3.15 | Scalarslave-meter2-VRMS | read-only | current | Compatible - slave Meter 2 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.2.3.16 | Scalarslave-meter2-IRMS | read-only | current | Compatible - slave Meter 2 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.2.3.17 | Scalarslave-meter2-KWH | read-only | current | Compatible - slave Meter 2 total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.2.3.18 | Scalarslave-meter2-KW | read-only | current | Compatible - slave Meter 2 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.2.3.19 | Scalarslave-meter2-TPMU | read-only | current | Compatible - slave Meter 2 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.2.3.20 | Scalarslave-meter2-IPK | read-only | current | Compatible - slave Meter 2 Peak Current (A) x10. |
| 1.3.6.1.4.1.38218.2.3.21 | Scalarslave-meter2-VPK | read-only | current | Compatible - slave Meter 2 Peak Voltage (V) x10. |
| 1.3.6.1.4.1.38218.2.3.22 | Scalarslave-meter2-PF | read-only | current | Compatible - slave Meter 2 Power Factor x1000 |
| 1.3.6.1.4.1.38218.2.3.23 | Scalarslave-meter2-Freq | read-only | current | Compatible - slave Meter 2 Frequency x10 |
| 1.3.6.1.4.1.38218.2.3.24 | Scalarslave-meter3-VRMS | read-only | current | Compatible - slave Meter 3 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.2.3.25 | Scalarslave-meter3-IRMS | read-only | current | Compatible - slave Meter 3 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.2.3.26 | Scalarslave-meter3-KWH | read-only | current | Compatible - slave Meter 3 total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.2.3.27 | Scalarslave-meter3-KW | read-only | current | Compatible - slave Meter 3 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.2.3.28 | Scalarslave-meter3-TPMU | read-only | current | Compatible - slave Meter 3 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.2.3.29 | Scalarslave-meter3-IPK | read-only | current | Compatible - slave Meter 3 Peak Current (A) x10. |
| 1.3.6.1.4.1.38218.2.3.30 | Scalarslave-meter3-VPK | read-only | current | Compatible - slave Meter 3 Peak Voltage (V) x10. |
| 1.3.6.1.4.1.38218.2.3.31 | Scalarslave-meter3-PF | read-only | current | Compatible - slave Meter 3 Power Factor x1000 |
| 1.3.6.1.4.1.38218.2.3.32 | Scalarslave-meter3-Freq | read-only | current | Compatible - slave Meter 3 Frequency x10 |
| 1.3.6.1.4.1.38218.2.4 | Nodeslave-sockets | |||
| 1.3.6.1.4.1.38218.2.4.1 | Tableslave-socketsTable | not-accessible | current | |
| 1.3.6.1.4.1.38218.2.4.1.1 | Rowslave-socketsEntry | not-accessible | current | Table of socket status parameters. |
| 1.3.6.1.4.1.38218.2.4.1.1.1 | Columnslave-socket-Index | not-accessible | current | socket index |
| 1.3.6.1.4.1.38218.2.4.1.1.2 | Columnslave-socket-Number | not-accessible | current | socket number [Range 1 to 48] |
| 1.3.6.1.4.1.38218.2.4.1.1.3 | Columnslave-socket-NotUsed1 | read-only | current | Compatible - Not used. |
| 1.3.6.1.4.1.38218.2.4.1.1.4 | Columnslave-socket-ONOFF | read-write | current | socket ON/OFF status [Compatible - Write ignored] |
| 1.3.6.1.4.1.38218.2.4.1.1.5 | Columnslave-socket-AMPS | read-only | current | socket current (Amps) x10. |
| 1.3.6.1.4.1.38218.2.4.1.1.6 | Columnslave-socket-KWH | read-write | current | socket Energy (kWh) x10. |
| 1.3.6.1.4.1.38218.2.4.2 | Scalarsocket-Selected | read-write | current | Compatible - Currently selected socket. Set to number between 1 and slave-pduNosockets |
| 1.3.6.1.4.1.38218.2.4.3 | Scalarsocket-AllON | read-write | current | Set all sockets in system to ON. |
| 1.3.6.1.4.1.38218.2.4.4 | Scalarsocket-AllOFF | read-write | current | Set all sockets in system to OFF. |
| 1.3.6.1.4.1.38218.2.5 | Nodeslave-Environmental | |||
| 1.3.6.1.4.1.38218.2.5.1 | Scalarslave-environmental-Temp1 | read-only | current | Compatible - Environmental Temperature probe 1 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.2 | Scalarslave-environmental-Temp2 | read-only | current | Compatible - Environmental Temperature probe 2 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.3 | Scalarslave-environmental-Temp3 | read-only | current | Compatible - Environmental Temperature probe 3 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.4 | Scalarslave-environmental-Temp4 | read-only | current | Compatible - Environmental Temperature probe 4 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.5 | Scalarslave-environmental-Temp5 | read-only | current | Compatible - Environmental Temperature probe 5 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.6 | Scalarslave-environmental-Temp6 | read-only | current | Compatible - Environmental Temperature probe 6 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.7 | Scalarslave-environmental-Temp7 | read-only | current | Compatible - Environmental Temperature probe 7 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.8 | Scalarslave-environmental-Temp8 | read-only | current | Compatible - Environmental Temperature probe 8 (C) x100. |
| 1.3.6.1.4.1.38218.2.5.9 | Scalarslave-environmental-HumidityTemp | read-only | current | Compatible - Environmental Humidity probe Temperature (C) x100. |
| 1.3.6.1.4.1.38218.2.5.10 | Scalarslave-environmental-Humidity | read-only | current | Compatible - Environmental humidity probe (%) x100. |
| 1.3.6.1.4.1.38218.2.5.11 | Scalarslave-environmental-Contact1 | read-write | current | Compatible - Environmental contact input 1 status. |
| 1.3.6.1.4.1.38218.2.5.12 | Scalarslave-environmental-Contact2 | read-write | current | Compatible - Environmental contact input 2 status. |
| 1.3.6.1.4.1.38218.2.5.13 | Scalarslave-environmental-Contact3 | read-write | current | Compatible - Environmental contact input 3 status. |
| 1.3.6.1.4.1.38218.2.6 | Nodeslave-Security | |||
| 1.3.6.1.4.1.38218.2.6.1 | Scalarslave-Security-Door | read-only | current | Compatible - Security door contact status. |
| 1.3.6.1.4.1.38218.2.6.2 | Scalarslave-Security-Lock | read-write | current | Compatible - Security lock status. Set with any data to force unlock. |
| 1.3.6.1.4.1.38218.2.7 | Nodeslave-Traps | |||
| 1.3.6.1.4.1.38218.2.7.1 | Nodeslave-TrapSetNotifications | |||
| 1.3.6.1.4.1.38218.2.7.1.1 | Notificationslave-Set-meter1-VRMSLow | current | Meter 1 Voltage LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.2 | Notificationslave-Set-meter1-VRMSHigh | current | Meter 1 Voltage HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.3 | Notificationslave-Set-meter1-IRMSLow | current | Meter 1 Amps LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.4 | Notificationslave-Set-meter1-IRMSHigh | current | Meter 1 Amps HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.5 | Notificationslave-Set-meter1-KWSLow | current | Meter 1 Kilowatts LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.6 | Notificationslave-Set-meter1-KWSHigh | current | Meter 1 Kilowatts HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.7 | Notificationslave-Set-meter1-TempLow | current | Meter 1 Temperature LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.8 | Notificationslave-Set-meter1-TempHigh | current | Meter 1 Temperature HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.9 | Notificationslave-Set-socket-AMPSLow | current | socket Amps LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.10 | Notificationslave-Set-socket-AMPSHigh | current | socket Amps HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.11 | Notificationslave-Set-environmental-Temp1Low | current | Environmental Temperature probe 1 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.12 | Notificationslave-Set-environmental-Temp1High | current | Environmental Temperature probe 1 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.13 | Notificationslave-Set-environmental-Temp2Low | current | Environmental Temperature probe 2 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.14 | Notificationslave-Set-environmental-Temp2High | current | Environmental Temperature probe 2 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.15 | Notificationslave-Set-environmental-Temp3Low | current | Environmental Temperature probe 3 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.16 | Notificationslave-Set-environmental-Temp3High | current | Environmental Temperature probe 3 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.17 | Notificationslave-Set-environmental-Temp4Low | current | Environmental Temperature probe 4 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.18 | Notificationslave-Set-environmental-Temp4High | current | Environmental Temperature probe 4 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.19 | Notificationslave-Set-environmental-Temp5Low | current | Environmental Temperature probe 5 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.20 | Notificationslave-Set-environmental-Temp5High | current | Environmental Temperature probe 5 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.21 | Notificationslave-Set-environmental-Temp6Low | current | Environmental Temperature probe 6 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.22 | Notificationslave-Set-environmental-Temp6High | current | Environmental Temperature probe 6 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.23 | Notificationslave-Set-environmental-Temp7Low | current | Environmental Temperature probe 7 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.24 | Notificationslave-Set-environmental-Temp7High | current | Environmental Temperature probe 7 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.25 | Notificationslave-Set-environmental-Temp8Low | current | Environmental Temperature probe 8 LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.26 | Notificationslave-Set-environmental-Temp8High | current | Environmental Temperature probe 8 HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.27 | Notificationslave-Set-environmental-HumidityTempLow | current | Environmental Humidity probe Temperature LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.28 | Notificationslave-Set-environmental-HumidityTempHigh | current | Environmental Humidity probe Temperature HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.29 | Notificationslave-Set-environmental-HumidityLow | current | Environmental Humidity probe LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.30 | Notificationslave-Set-environmental-HumidityHigh | current | Environmental Humidity probe HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.31 | Notificationslave-Set-environmental-Contact1Open | current | Environmental Contact 1 OPEN trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.32 | Notificationslave-Set-environmental-Contact1Closed | current | Environmental Contact 1 CLOSED trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.33 | Notificationslave-Set-environmental-Contact2Open | current | Environmental Contact 2 OPEN trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.34 | Notificationslave-Set-environmental-Contact2Closed | current | Environmental Contact 2 CLOSED trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.35 | Notificationslave-Set-environmental-Contact3Open | current | Environmental Contact 3 OPEN trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.36 | Notificationslave-Set-environmental-Contact3Closed | current | Environmental Contact 3 CLOSED trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.37 | Notificationslave-Set-Security-DoorOpen | current | Environmental Door OPEN trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.38 | Notificationslave-Set-Security-DoorClosed | current | Environmental Door CLOSED trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.39 | Notificationslave-Set-Security-LockUnlocked | current | Environmental Lock UNLOCKED trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.40 | Notificationslave-Set-Security-LockLocked | current | Environmental Lock LOCKED trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.41 | Notificationslave-Set-pduOffline | current | pdu OFFLINE trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.42 | Notificationslave-Set-meter1-PFLow | current | Meter 1 Power Factor LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.43 | Notificationslave-Set-meter1-PFHigh | current | Meter 1 Power Factor HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.44 | Notificationslave-Set-meter1-FreqLow | current | Meter 1 Frequency LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.45 | Notificationslave-Set-meter1-FreqHigh | current | Meter 1 Frequency HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.46 | Notificationslave-Set-meter2-VRMSLow | current | Meter 2 Voltage LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.47 | Notificationslave-Set-meter2-VRMSHigh | current | Meter 2 Voltage HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.48 | Notificationslave-Set-meter2-IRMSLow | current | Meter 2 Amps LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.49 | Notificationslave-Set-meter2-IRMSHigh | current | Meter 2 Amps HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.50 | Notificationslave-Set-meter2-KWSLow | current | Meter 2 Kilowatts LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.51 | Notificationslave-Set-meter2-KWSHigh | current | Meter 2 Kilowatts HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.52 | Notificationslave-Set-meter2-TempLow | current | Meter 2 Temperature LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.53 | Notificationslave-Set-meter2-TempHigh | current | Meter 2 Temperature HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.54 | Notificationslave-Set-meter2-PFLow | current | Meter 2 Power Factor LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.55 | Notificationslave-Set-meter2-PFHigh | current | Meter 2 Power Factor HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.56 | Notificationslave-Set-meter2-FreqLow | current | Meter 2 Frequency LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.57 | Notificationslave-Set-meter2-FreqHigh | current | Meter 2 Frequency HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.58 | Notificationslave-Set-meter3-VRMSLow | current | Meter 3 Voltage LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.59 | Notificationslave-Set-meter3-VRMSHigh | current | Meter 3 Voltage HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.60 | Notificationslave-Set-meter3-IRMSLow | current | Meter 3 Amps LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.61 | Notificationslave-Set-meter3-IRMSHigh | current | Meter 3 Amps HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.62 | Notificationslave-Set-meter3-KWSLow | current | Meter 3 Kilowatts LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.63 | Notificationslave-Set-meter3-KWSHigh | current | Meter 3 Kilowatts HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.64 | Notificationslave-Set-meter3-TempLow | current | Meter 3 Temperature LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.65 | Notificationslave-Set-meter3-TempHigh | current | Meter 3 Temperature HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.66 | Notificationslave-Set-meter3-PFLow | current | Meter 3 Power Factor LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.67 | Notificationslave-Set-meter3-PFHigh | current | Meter 3 Power Factor HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.68 | Notificationslave-Set-meter3-FreqLow | current | Meter 3 Frequency LOW trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.1.69 | Notificationslave-Set-meter3-FreqHigh | current | Meter 3 Frequency HIGH trap SET notification | |
| 1.3.6.1.4.1.38218.2.7.2 | Nodeslave-TrapClearNotifications | |||
| 1.3.6.1.4.1.38218.2.7.2.1 | Notificationslave-Clear-meter1-VRMSLow | current | Meter 1 Voltage LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.2 | Notificationslave-Clear-meter1-VRMSHigh | current | Meter 1 Voltage HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.3 | Notificationslave-Clear-meter1-IRMSLow | current | Meter 1 Amps LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.4 | Notificationslave-Clear-meter1-IRMSHigh | current | Meter 1 Amps HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.5 | Notificationslave-Clear-meter1-KWSLow | current | Meter 1 Kilowatts LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.6 | Notificationslave-Clear-meter1-KWSHigh | current | Meter 1 Kilowatts HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.7 | Notificationslave-Clear-meter1-TempLow | current | Meter 1 Temperature LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.8 | Notificationslave-Clear-meter1-TempHigh | current | Meter 1 Temperature HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.9 | Notificationslave-Clear-socket-AMPSLow | current | socket Amps LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.10 | Notificationslave-Clear-socket-AMPSHigh | current | socket Amps HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.11 | Notificationslave-Clear-environmental-Temp1Low | current | Environmental Temperature probe 1 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.12 | Notificationslave-Clear-environmental-Temp1High | current | Environmental Temperature probe 1 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.13 | Notificationslave-Clear-environmental-Temp2Low | current | Environmental Temperature probe 2 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.14 | Notificationslave-Clear-environmental-Temp2High | current | Environmental Temperature probe 2 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.15 | Notificationslave-Clear-environmental-Temp3Low | current | Environmental Temperature probe 3 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.16 | Notificationslave-Clear-environmental-Temp3High | current | Environmental Temperature probe 3 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.17 | Notificationslave-Clear-environmental-Temp4Low | current | Environmental Temperature probe 4 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.18 | Notificationslave-Clear-environmental-Temp4High | current | Environmental Temperature probe 4 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.19 | Notificationslave-Clear-environmental-Temp5Low | current | Environmental Temperature probe 5 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.20 | Notificationslave-Clear-environmental-Temp5High | current | Environmental Temperature probe 5 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.21 | Notificationslave-Clear-environmental-Temp6Low | current | Environmental Temperature probe 6 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.22 | Notificationslave-Clear-environmental-Temp6High | current | Environmental Temperature probe 6 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.23 | Notificationslave-Clear-environmental-Temp7Low | current | Environmental Temperature probe 7 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.24 | Notificationslave-Clear-environmental-Temp7High | current | Environmental Temperature probe 7 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.25 | Notificationslave-Clear-environmental-Temp8Low | current | Environmental Temperature probe 8 LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.26 | Notificationslave-Clear-environmental-Temp8High | current | Environmental Temperature probe 8 HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.27 | Notificationslave-Clear-environmental-HumidityTempLow | current | Environmental Humidity probe Temperature LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.28 | Notificationslave-Clear-environmental-HumidityTempHigh | current | Environmental Humidity probe Temperature HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.29 | Notificationslave-Clear-environmental-HumidityLow | current | Environmental Humidity probe LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.30 | Notificationslave-Clear-environmental-HumidityHigh | current | Environmental Humidity probe HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.31 | Notificationslave-Clear-environmental-Contact1Open | current | Environmental Contact 1 OPEN trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.32 | Notificationslave-Clear-environmental-Contact1Closed | current | Environmental Contact 1 CLOSED trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.33 | Notificationslave-Clear-environmental-Contact2Open | current | Environmental Contact 2 OPEN trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.34 | Notificationslave-Clear-environmental-Contact2Closed | current | Environmental Contact 2 CLOSED trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.35 | Notificationslave-Clear-environmental-Contact3Open | current | Environmental Contact 3 OPEN trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.36 | Notificationslave-Clear-environmental-Contact3Closed | current | Environmental Contact 3 CLOSED trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.37 | Notificationslave-Clear-Security-DoorOpen | current | Environmental Door OPEN trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.38 | Notificationslave-Clear-Security-DoorClosed | current | Environmental Door CLOSED trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.39 | Notificationslave-Clear-Security-LockUnlocked | current | Environmental Lock UNLOCKED trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.40 | Notificationslave-Clear-Security-LockLocked | current | Environmental Lock LOCKED trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.41 | Notificationslave-Clear-pduOffline | current | pdu OFFLINE trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.42 | Notificationslave-Clear-meter1-PFLow | current | Meter 1 Power Factor LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.43 | Notificationslave-Clear-meter1-PFHigh | current | Meter 1 Power Factor HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.44 | Notificationslave-Clear-meter1-FreqLow | current | Meter 1 Frequency LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.45 | Notificationslave-Clear-meter1-FreqHigh | current | Meter 1 Frequency HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.46 | Notificationslave-Clear-meter2-VRMSLow | current | Meter 2 Voltage LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.47 | Notificationslave-Clear-meter2-VRMSHigh | current | Meter 2 Voltage HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.48 | Notificationslave-Clear-meter2-IRMSLow | current | Meter 2 Amps LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.49 | Notificationslave-Clear-meter2-IRMSHigh | current | Meter 2 Amps HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.50 | Notificationslave-Clear-meter2-KWSLow | current | Meter 2 Kilowatts LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.51 | Notificationslave-Clear-meter2-KWSHigh | current | Meter 2 Kilowatts HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.52 | Notificationslave-Clear-meter2-TempLow | current | Meter 2 Temperature LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.53 | Notificationslave-Clear-meter2-TempHigh | current | Meter 2 Temperature HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.54 | Notificationslave-Clear-meter2-PFLow | current | Meter 2 Power Factor LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.55 | Notificationslave-Clear-meter2-PFHigh | current | Meter 2 Power Factor HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.56 | Notificationslave-Clear-meter2-FreqLow | current | Meter 2 Frequency LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.57 | Notificationslave-Clear-meter2-FreqHigh | current | Meter 2 Frequency HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.58 | Notificationslave-Clear-meter3-VRMSLow | current | Meter 3 Voltage LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.59 | Notificationslave-Clear-meter3-VRMSHigh | current | Meter 3 Voltage HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.60 | Notificationslave-Clear-meter3-IRMSLow | current | Meter 3 Amps LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.61 | Notificationslave-Clear-meter3-IRMSHigh | current | Meter 3 Amps HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.62 | Notificationslave-Clear-meter3-KWSLow | current | Meter 3 Kilowatts LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.63 | Notificationslave-Clear-meter3-KWSHigh | current | Meter 3 Kilowatts HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.64 | Notificationslave-Clear-meter3-TempLow | current | Meter 3 Temperature LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.65 | Notificationslave-Clear-meter3-TempHigh | current | Meter 3 Temperature HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.66 | Notificationslave-Clear-meter3-PFLow | current | Meter 3 Power Factor LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.67 | Notificationslave-Clear-meter3-PFHigh | current | Meter 3 Power Factor HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.68 | Notificationslave-Clear-meter3-FreqLow | current | Meter 3 Frequency LOW trap CLEAR notification | |
| 1.3.6.1.4.1.38218.2.7.2.69 | Notificationslave-Clear-meter3-FreqHigh | current | Meter 3 Frequency HIGH trap CLEAR notification | |
| 1.3.6.1.4.1.38218.3 | Nodeslave-Global | |||
| 1.3.6.1.4.1.38218.3.1 | Tableslave-Global-Table | not-accessible | current | |
| 1.3.6.1.4.1.38218.3.1.1 | Rowslave-Global-Entry | not-accessible | current | Table of Trap notification destinations. |
| 1.3.6.1.4.1.38218.3.1.1.1 | Columnslave-Global-Index | not-accessible | current | pdu index [0..Nopdus]. |
| 1.3.6.1.4.1.38218.3.1.1.2 | Columnslave-Global-Status | read-write | current | Compatible - pdu ONLINE / OFFLINE or DISABLED status. |
| 1.3.6.1.4.1.38218.3.1.1.3 | Columnslave-Global-Address | read-only | current | Compatible - pdu MODBUS Address. |
| 1.3.6.1.4.1.38218.3.1.1.4 | Columnslave-Global-Nosockets | read-only | current | Compatible - pdu Number of sockets. |
| 1.3.6.1.4.1.38218.3.1.1.5 | Columnslave-Global-meter1-VRMS | read-only | current | Compatible - Meter 1 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.3.1.1.6 | Columnslave-Global-meter1-IRMS | read-only | current | Compatible - Meter 1 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.3.1.1.7 | Columnslave-Global-meter1-KWH | read-only | current | Compatible - Meter 1 Total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.3.1.1.8 | Columnslave-Global-meter1-KW | read-only | current | Compatible - Meter 1 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.3.1.1.9 | Columnslave-Global-meter1-TPMU | read-only | current | Compatible - Meter 1 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.3.1.1.10 | Columnslave-Global-meter1-PF | read-only | current | Compatible - Meter 1 Power Factor x1000 |
| 1.3.6.1.4.1.38218.3.1.1.11 | Columnslave-Global-environmental-Temp1 | read-only | current | Compatible - Environmental Temperature probe 1 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.12 | Columnslave-Global-environmental-Temp2 | read-only | current | Compatible - Environmental Temperature probe 2 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.13 | Columnslave-Global-environmental-Temp3 | read-only | current | Compatible - Environmental Temperature probe 3 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.14 | Columnslave-Global-environmental-Temp4 | read-only | current | Compatible - Environmental Temperature probe 4 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.15 | Columnslave-Global-environmental-Temp5 | read-only | current | Compatible - Environmental Temperature probe 5 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.16 | Columnslave-Global-environmental-Temp6 | read-only | current | Compatible - Environmental Temperature probe 6 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.17 | Columnslave-Global-environmental-Temp7 | read-only | current | Compatible - Environmental Temperature probe 7 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.18 | Columnslave-Global-environmental-Temp8 | read-only | current | Compatible - Environmental Temperature probe 8 (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.19 | Columnslave-Global-environmental-HumidityTemp | read-only | current | Compatible - Environmental Humidity probe Temperature (C) x100. |
| 1.3.6.1.4.1.38218.3.1.1.20 | Columnslave-Global-environmental-Humidity | read-only | current | Compatible - Environmental humidity probe (%) x100. |
| 1.3.6.1.4.1.38218.3.1.1.21 | Columnslave-Global-environmental-Contact1 | read-write | current | Compatible - Environmental contact input 1 status. Set with any data to clear status. |
| 1.3.6.1.4.1.38218.3.1.1.22 | Columnslave-Global-environmental-Contact2 | read-write | current | Compatible - Environmental contact input 2 status. Set with any data to clear status. |
| 1.3.6.1.4.1.38218.3.1.1.23 | Columnslave-Global-environmental-Contact3 | read-write | current | Compatible - Environmental contact input 3 status. Set with any data to clear status. |
| 1.3.6.1.4.1.38218.3.1.1.24 | Columnslave-Global-Security-Door | read-only | current | Compatible - Environmental door contact status. |
| 1.3.6.1.4.1.38218.3.1.1.25 | Columnslave-Global-Security-Lock | read-write | current | Compatible - Environmental lock status. Set with any data to force unlock. |
| 1.3.6.1.4.1.38218.3.1.1.26 | Columnslave-Global-sockets | read-write | current | Compatible - socket status bits 1 to 32 Set or clear bit to control socket, Bit 0 = socket 1, Bit 31 = socket 32 |
| 1.3.6.1.4.1.38218.3.1.1.27 | Columnslave-Global-socket1Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.28 | Columnslave-Global-socket2Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.29 | Columnslave-Global-socket3Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.30 | Columnslave-Global-socket4Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.31 | Columnslave-Global-socket5Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.32 | Columnslave-Global-socket6Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.33 | Columnslave-Global-socket7Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.34 | Columnslave-Global-socket8Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.35 | Columnslave-Global-socket9Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.36 | Columnslave-Global-socket10Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.37 | Columnslave-Global-socket11Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.38 | Columnslave-Global-socket12Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.39 | Columnslave-Global-socket13Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.40 | Columnslave-Global-socket14Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.41 | Columnslave-Global-socket15Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.42 | Columnslave-Global-socket16Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.43 | Columnslave-Global-socket17Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.44 | Columnslave-Global-socket18Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.45 | Columnslave-Global-socket19Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.46 | Columnslave-Global-socket20Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.47 | Columnslave-Global-socket21Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.48 | Columnslave-Global-socket22Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.49 | Columnslave-Global-socket23Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.50 | Columnslave-Global-socket24Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.51 | Columnslave-Global-socket25Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.52 | Columnslave-Global-socket26Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.53 | Columnslave-Global-socket27Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.54 | Columnslave-Global-socket28Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.55 | Columnslave-Global-socket29Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.56 | Columnslave-Global-socket30Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.57 | Columnslave-Global-socket31Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.58 | Columnslave-Global-socket32Amps | read-only | current | Compatible - socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.59 | Columnslave-Global-socket1kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.60 | Columnslave-Global-socket2kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.61 | Columnslave-Global-socket3kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.62 | Columnslave-Global-socket4kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.63 | Columnslave-Global-socket5kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.64 | Columnslave-Global-socket6kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.65 | Columnslave-Global-socket7kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.66 | Columnslave-Global-socket8kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.67 | Columnslave-Global-socket9kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.68 | Columnslave-Global-socket10kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.69 | Columnslave-Global-socket11kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.70 | Columnslave-Global-socket12kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.71 | Columnslave-Global-socket13kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.72 | Columnslave-Global-socket14kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.73 | Columnslave-Global-socket15kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.74 | Columnslave-Global-socket16kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.75 | Columnslave-Global-socket17kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.76 | Columnslave-Global-socket18kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.77 | Columnslave-Global-socket19kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.78 | Columnslave-Global-socket20kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.79 | Columnslave-Global-socket21kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.80 | Columnslave-Global-socket22kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.81 | Columnslave-Global-socket23kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.82 | Columnslave-Global-socket24kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.83 | Columnslave-Global-socket25kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.84 | Columnslave-Global-socket26kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.85 | Columnslave-Global-socket27kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.86 | Columnslave-Global-socket28kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.87 | Columnslave-Global-socket29kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.88 | Columnslave-Global-socket30kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.89 | Columnslave-Global-socket31kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.90 | Columnslave-Global-socket32kWh | read-only | current | Compatible - socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.91 | Columnslave-Global-socket33Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.92 | Columnslave-Global-socket34Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.93 | Columnslave-Global-socket35Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.94 | Columnslave-Global-socket36Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.95 | Columnslave-Global-socket37Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.96 | Columnslave-Global-socket38Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.97 | Columnslave-Global-socket39Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.98 | Columnslave-Global-socket40Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.99 | Columnslave-Global-socket41Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.100 | Columnslave-Global-socket42Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.101 | Columnslave-Global-socket43Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.102 | Columnslave-Global-socket44Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.103 | Columnslave-Global-socket45Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.104 | Columnslave-Global-socket46Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.105 | Columnslave-Global-socket47Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.106 | Columnslave-Global-socket48Amps | read-only | current | socket Amps value x10. |
| 1.3.6.1.4.1.38218.3.1.1.107 | Columnslave-Global-socket33kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.108 | Columnslave-Global-socket34kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.109 | Columnslave-Global-socket35kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.110 | Columnslave-Global-socket36kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.111 | Columnslave-Global-socket37kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.112 | Columnslave-Global-socket38kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.113 | Columnslave-Global-socket39kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.114 | Columnslave-Global-socket40kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.115 | Columnslave-Global-socket41kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.116 | Columnslave-Global-socket42kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.117 | Columnslave-Global-socket43kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.118 | Columnslave-Global-socket44kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.119 | Columnslave-Global-socket45kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.120 | Columnslave-Global-socket46kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.121 | Columnslave-Global-socket47kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.122 | Columnslave-Global-socket48kWh | read-only | current | socket kWh value x10. |
| 1.3.6.1.4.1.38218.3.1.1.123 | Columnslave-Global-sockets2 | read-write | current | socket status bits 33-48 Set or clear bit to control socket, Bit 0 = socket 33, Bit 15 = socket 48 |
| 1.3.6.1.4.1.38218.3.1.1.124 | Columnslave-Global-meter1-Freq | read-only | current | Meter 1 Frequency x10 |
| 1.3.6.1.4.1.38218.3.1.1.125 | Columnslave-Global-meter2-VRMS | read-only | current | Meter 2 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.3.1.1.126 | Columnslave-Global-meter2-IRMS | read-only | current | Meter 2 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.3.1.1.127 | Columnslave-Global-meter2-KWH | read-only | current | Meter 2 Total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.3.1.1.128 | Columnslave-Global-meter2-KW | read-only | current | Meter 2 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.3.1.1.129 | Columnslave-Global-meter2-TPMU | read-only | current | Meter 2 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.3.1.1.130 | Columnslave-Global-meter2-PF | read-only | current | Meter 2 Power Factor x1000 |
| 1.3.6.1.4.1.38218.3.1.1.131 | Columnslave-Global-meter2-Freq | read-only | current | Meter 2 Frequency x10 |
| 1.3.6.1.4.1.38218.3.1.1.132 | Columnslave-Global-meter3-VRMS | read-only | current | Meter 3 RMS Voltage (VAC) x10. |
| 1.3.6.1.4.1.38218.3.1.1.133 | Columnslave-Global-meter3-IRMS | read-only | current | Meter 3 RMS Current (A) x10. |
| 1.3.6.1.4.1.38218.3.1.1.134 | Columnslave-Global-meter3-KWH | read-only | current | Meter 3 Total energy consumption (kW/h) x10. |
| 1.3.6.1.4.1.38218.3.1.1.135 | Columnslave-Global-meter3-KW | read-only | current | Meter 3 Kilowatts (kW) x1000. |
| 1.3.6.1.4.1.38218.3.1.1.136 | Columnslave-Global-meter3-TPMU | read-only | current | Meter 3 Internal Temperature (C) x10. |
| 1.3.6.1.4.1.38218.3.1.1.137 | Columnslave-Global-meter3-PF | read-only | current | Meter 3 Power Factor x1000 |
| 1.3.6.1.4.1.38218.3.1.1.138 | Columnslave-Global-meter3-Freq | read-only | current | Meter 3 Frequency x10 |