PEGASUS-MIB
223 objects
This MIB applies to the PEGASUS SDSL product manufactured by Schmid Telecom Zurich. The MIB is modelled after the PEM management model, so object hierarchy and individual variables agree with the PEM client. The overall structure is five groups, one for each of DSL, V5 and Data cards, one with global parameters for the whole rack, and finally one group for performance history measurement. The DSL group contains four tables: - dslCardTable one entry for each DSL card (line card) configured. - dslLinkTable one entry for each DSL link. - dslInterfaceTable one entry per DSL interface, i.e. two per DSL link. - iadTable one entry per DSL link. - dslLinkCosTable one entry per DSL link. The V5 group contains five tables: - v5CardTable one entry for each V5 card configured. - v5LinkTable one entry for each V5 link. - v5InterfaceTable one entry for each V5 interface. - v5IsdnPortTable one entry per ISDN User Port (S0 interface on IAD). - v5LccTable one entry per Logical Communication Channel. The data switch group contains two tables: - dataCardTable one entry per data card (normally one) - dataPortTable one entry per trunk interface. The Pegasus System group contains individual variables related to the rack as a whole. The perf group for performance histories contains two tables and one extra variable: - perfSweeperCyclePeriod how soon are unused perfDataTable entries cleared - perfControlTable configuration of performance history monitoring - perfDataTable performance history registers Note - Notification definitions are singled out to their own MIB, to allow for alternative sets of notification styles. - Tables in this MIB are indexed hierarchically with physical attributes. E.g. all cards are indexed by the slot number. DSL links are indexed by two variables: first the slot number of the DSL card which carries the link, then the number of the link within that card. - Unlike the PEM client, this MIB does not model V5 Physical Communication Channels explicitely. They have no interesting variables of their own. Rather, the user allots a range of these objects through the V5 link configuration, and then maps the Logical Communication Channels to them (using indexes within the alloted range, of course). These objects are then created, deleted and managed under the hood. - V5 interfaces are logical entities, unlike DSL interfaces. - ISDN user ports are physically part of the IAD, and are indexed by DSL attributes. Their configuration, though, belongs to V5, so the user port tables are in the V5 group, not in the DSL group.
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6368 | Nodeschmidtelecom | |||
| 1.3.6.1.4.1.6368.2 | IdentitypegasusMibModule | This MIB applies to the PEGASUS SDSL product manufactured by Schmid Telecom Zurich. The MIB is modelled after the PEM management model, so object hierarchy and… | ||
| 1.3.6.1.4.1.6368.2.1 | Nodedsl | |||
| 1.3.6.1.4.1.6368.2.1.1 | TabledslCardTable | not-accessible | current | A table containing line card specific information. |
| 1.3.6.1.4.1.6368.2.1.1.1 | RowdslCardEntry | not-accessible | current | Row and index definition for line card table. |
| 1.3.6.1.4.1.6368.2.1.1.1.1 | ColumndslCardSlotNumber | not-accessible | current | Slot number for line card. |
| 1.3.6.1.4.1.6368.2.1.1.1.2 | ColumndslCardAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.1.1.1.3 | ColumndslCardHardwareVersion | read-only | current | Hardware version of the Line card. This is also called CHM-number (it always starts with the letters 'CHM'). Example: CHM40510WA0A2. The number '405' after the… |
| 1.3.6.1.4.1.6368.2.1.1.1.4 | ColumndslCardManufacturer | read-only | current | Name of company which manufactured this line card/ltu. |
| 1.3.6.1.4.1.6368.2.1.1.1.5 | ColumndslCardName | read-only | current | User defined ame of line card. |
| 1.3.6.1.4.1.6368.2.1.1.1.6 | ColumndslCardOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.1.1.1.7 | ColumndslCardFirmwareVersion | read-only | current | Version number and build date of the firmware running on the line card. This applies to the PPC part, the M16 firmware part has its own version attribute, dslC… |
| 1.3.6.1.4.1.6368.2.1.1.1.8 | ColumndslCardSerialNumber | read-only | current | Serial number of the line card. Also called HM-number, as it always starts with 'HM'. Example: HMVSS014810294. |
| 1.3.6.1.4.1.6368.2.1.1.1.9 | ColumndslCardCommState | read-only | current | The Management Comm State indicates the state of the management connection between the PEM Server and the line card. disconnected No connection has been establ… |
| 1.3.6.1.4.1.6368.2.1.1.1.10 | ColumndslCardAlarmStatus | read-only | current | Alarm status of the line card. Bits assigned as follows: bit 0 intercom The intercom line between the PPC and M16 has failed. |
| 1.3.6.1.4.1.6368.2.1.1.1.11 | ColumndslCardM16FirmwareVersion | read-only | current | Version number and build date of the firmware running on the line card. This applies to the M16 part, the PPC firmware part has its own version attribute, dslC… |
| 1.3.6.1.4.1.6368.2.1.2 | TabledslLinkTable | not-accessible | current | A table containing dsl link specific information. |
| 1.3.6.1.4.1.6368.2.1.2.1 | RowdslLinkEntry | not-accessible | current | Information about a particular dsl link. |
| 1.3.6.1.4.1.6368.2.1.2.1.1 | ColumndslLinkNumber | not-accessible | current | Number 1-8 of link on line card. |
| 1.3.6.1.4.1.6368.2.1.2.1.2 | ColumndslLinkActiveLoop | read-write | current | Loop back (test) setup currently active. Disconnect the DSL link before activating the maintenance loop on the LTU (loop1). |
| 1.3.6.1.4.1.6368.2.1.2.1.3 | ColumndslLinkAddress | read-write | current | Customer address stored in configuration file of agent. |
| 1.3.6.1.4.1.6368.2.1.2.1.4 | ColumndslLinkAdminState | read-write | current | This configuration attribute allows the administrator to enable or disable the operability of a device. unlocked The device is administratively permitted to pe… |
| 1.3.6.1.4.1.6368.2.1.2.1.5 | ColumndslLinkAlarmStatus | read-only | current | Alarms on the link. Bit assignments as follows: Bit 0 Configuration Alarm present on link. Some configuration attribute is invalid. Bit 1 User Service Alarm pr… |
| 1.3.6.1.4.1.6368.2.1.2.1.6 | ColumndslLinkAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.1.2.1.7 | ColumndslLinkContact | read-write | current | A contact person, address or phone number. |
| 1.3.6.1.4.1.6368.2.1.2.1.8 | ColumndslLinkCustomerId | read-write | current | An identification number which has been assigned to this customer. |
| 1.3.6.1.4.1.6368.2.1.2.1.9 | ColumndslLinkDynamicSlotAllocation | read-write | current | If set to true(1), the link allows timeslots reserved for voice but currently unused for usage by data. This can improve utilization of the link by increasing … |
| 1.3.6.1.4.1.6368.2.1.2.1.10 | ColumndslLinkIsRemotePower | read-write | current | LTU puts dc supply voltage onto link. IAD uses this if local power fails. |
| 1.3.6.1.4.1.6368.2.1.2.1.11 | ColumndslLinkLineRate | read-write | current | Number of 64Kbit timeslots per second. The signal on the DSL link is structured as 166 2/3 frames with 48 blocks each, for a total of 8000 blocks per second. E… |
| 1.3.6.1.4.1.6368.2.1.2.1.12 | ColumndslLinkDataRate | read-write | current | Number of timeslots per block reserved for data. The value of this object cannot be set outside of the range 0..36, inclusive. It should be chosen such that th… |
| 1.3.6.1.4.1.6368.2.1.2.1.13 | ColumndslLinkName | read-write | current | User defined name of the DSL link. |
| 1.3.6.1.4.1.6368.2.1.2.1.14 | ColumndslLinkNotes | read-write | current | Notes stored in the configuration file of the agent. |
| 1.3.6.1.4.1.6368.2.1.2.1.15 | ColumndslLinkNumberOfBRA | read-write | current | Number of basic rate interfaces on the IAD for which capacity is reserved on the DSL link. The capacity is reserved in units of timeslots, and the table below … |
| 1.3.6.1.4.1.6368.2.1.2.1.16 | ColumndslLinkOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.1.2.1.17 | ColumndslLinkNumberOfZBits | read-write | current | Number of Z bits on the DSL link. |
| 1.3.6.1.4.1.6368.2.1.2.1.18 | ColumndslLinkPSDMask | read-write | current | PSD (Power Spectral Density) Mask of DSL link. Asymmetric PSD offers a 5 - 10% longer DSL range. PSD symmetric is default setting. PSD asymmetric is only possi… |
| 1.3.6.1.4.1.6368.2.1.2.1.19 | ColumndslLinkAssignedTrunk | read-write | current | Determines the data trunk (aggregate side) on which the all data traffic of this DSL Link is mapped. |
| 1.3.6.1.4.1.6368.2.1.2.1.20 | ColumndslLinkPriority | read-write | current | Determines the priority according to IEEE 802.3x for data traffic coming from this DSL Link. Value range is 0 .. 7. 0 lowest priority, 7 highest priority. |
| 1.3.6.1.4.1.6368.2.1.3 | TableiadTable | not-accessible | current | IAD table. IAD is for Integrated Access Device. The IAD contains the DSL NTU, and depending on the model, ISDN Adapters, POTS Terminal Adapters (TA) and Ethern… |
| 1.3.6.1.4.1.6368.2.1.3.1 | RowiadEntry | not-accessible | current | Carry index for iad table. |
| 1.3.6.1.4.1.6368.2.1.3.1.1 | ColumniadAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.1.3.1.2 | ColumniadHardwareVersion | read-only | current | Hardware version of the IAD. This is also called CHM-number (it always starts with the letters 'CHM'). Example: CHM415080WAAA2. The number '415' after the 'CHM… |
| 1.3.6.1.4.1.6368.2.1.3.1.3 | ColumniadManufacturer | read-only | current | Name of company which manufactured this IAD. |
| 1.3.6.1.4.1.6368.2.1.3.1.4 | ColumniadName | read-only | current | User defined name of IAD. |
| 1.3.6.1.4.1.6368.2.1.3.1.5 | ColumniadOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.1.3.1.6 | ColumniadFirmwareVersion | read-only | current | Version number and build date of the firmware running on the IAD. Example: '1.3 20020607 16:34' The format is 'major.minor YYYYMMDD hh:mm', where the fields ar… |
| 1.3.6.1.4.1.6368.2.1.3.1.7 | ColumniadSerialNumber | read-only | current | Serial number of the IAD. Also called HM-number, as it always starts with 'HM'. Example: HMHMZ014432064. |
| 1.3.6.1.4.1.6368.2.1.3.1.8 | ColumniadAlarmStatus | read-only | current | Alarm Status of IAD. Individual alarms show that specific (usually adverse) conditions are present. Bits are assigned as follows: bit 0 powerdown The IAD has n… |
| 1.3.6.1.4.1.6368.2.1.3.1.9 | ColumniadISDNPowering | read-write | current | State of the powering of the ISDN S-Bus port 0. no power No powering of ISDN S0 Bus at all. normal power Powering of ISDN S0 Bus, normal mode. lifeline power L… |
| 1.3.6.1.4.1.6368.2.1.3.1.10 | ColumniadPOTSPowering | read-write | current | Defines how the IAD powers the POTS line, i.e. the analog telephone line on the integrated TA. This feature is not reliable on older IAD models. |
| 1.3.6.1.4.1.6368.2.1.3.1.11 | ColumniadEthPortSpeed | read-write | current | Configuration of the desired speed for the IAD's Ethernet port. |
| 1.3.6.1.4.1.6368.2.1.3.1.12 | ColumniadEthCurrentPortSpeed | read-only | current | Displays the currently active speed of a IAD's Ethernet port. |
| 1.3.6.1.4.1.6368.2.1.3.1.13 | ColumniadEthFlowControl | read-write | current | Configuration of the desired flow control. |
| 1.3.6.1.4.1.6368.2.1.3.1.14 | ColumniadEthCurrentFlowControl | read-only | current | Displays the currently used flow control. |
| 1.3.6.1.4.1.6368.2.1.4 | TabledslInterfaceTable | not-accessible | current | DSL Interface table. |
| 1.3.6.1.4.1.6368.2.1.4.1 | RowdslInterfaceEntry | not-accessible | current | Row/index definition for dslInterfaceTable. |
| 1.3.6.1.4.1.6368.2.1.4.1.1 | ColumndslInterfaceType | not-accessible | current | The type of device on which the interface sits: LTU (linecard) or Ntu (IAD, modem). |
| 1.3.6.1.4.1.6368.2.1.4.1.2 | ColumndslInterfaceAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.1.4.1.3 | ColumndslInterfaceOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.1.4.1.4 | ColumndslInterfacePerformanceStatus | read-only | current | Displays the current status of the DSL interface |
| 1.3.6.1.4.1.6368.2.1.4.1.5 | ColumndslInterfacePerfControlIndexOrZero | read-write | current | If the value of this variable is set to a non-zero value, there must be a row in perfControlTable with this value in perfControlIndex. The perfControlEntry thu… |
| 1.3.6.1.4.1.6368.2.1.4.1.6 | ColumndslInterfaceSignalQuality | read-only | current | This object gives the signal quality, expressed as the signal-to-noise ratio (SNR) in decibels (dB). The value 127 shows that the real value is currently unava… |
| 1.3.6.1.4.1.6368.2.1.4.1.7 | ColumndslInterfaceAttenuation | read-only | current | This object shows how much the signal has been weakened (attenuated) on the DSL line. It is expressed in decibels (dB) relative to the transmit power. The valu… |
| 1.3.6.1.4.1.6368.2.1.5 | TabledslLinkCosTable | not-accessible | current | Class of Service (COS) table for a DSL link. The table allows to assign vlans or priorities to the queues EF (Expedited Forwarding) and AF1/AF2 (Assured Forwar… |
| 1.3.6.1.4.1.6368.2.1.5.1 | RowdslLinkCosEntry | not-accessible | current | Row/index definition for dslLinkCosTable. |
| 1.3.6.1.4.1.6368.2.1.5.1.1 | ColumndslLinkCosAvailable | read-only | current | If true(1), COS is supported by the LineCard. |
| 1.3.6.1.4.1.6368.2.1.5.1.2 | ColumndslLinkCosEnabled | read-write | current | Enabling and disabling of COS for the specified link. |
| 1.3.6.1.4.1.6368.2.1.5.1.3 | ColumndslLinkCosClassifier | read-write | current | Configuration of the desired classifier. Possible values are VLAN priority and DSCP (Differentiated Services Code Point) priority. |
| 1.3.6.1.4.1.6368.2.1.5.1.4 | ColumndslLinkCosClassmapEF | read-write | current | Classmap for the EF (Expedited Forwarding) queue. See description of CosClassmap for further information. |
| 1.3.6.1.4.1.6368.2.1.5.1.5 | ColumndslLinkCosClassmapAF2 | read-write | current | Classmap for the AF2 (Assured Forwarding) queue. See description of CosClassmap for further information. |
| 1.3.6.1.4.1.6368.2.1.5.1.6 | ColumndslLinkCosClassmapAF1 | read-write | current | Classmap for the AF1 (Assured Forwarding) queue. See description of CosClassmap for further information. |
| 1.3.6.1.4.1.6368.2.1.5.1.7 | ColumndslLinkCosRateLimitEF | read-write | current | Maximum rate in kB that the EF queue is allowed to use. Note: The sum of the maxima of EF, AF1 and AF2 queue cannot exceed the configured maximum data rate od … |
| 1.3.6.1.4.1.6368.2.1.5.1.8 | ColumndslLinkCosRateLimitAF2 | read-write | current | Maximum rate in kB that the AF2 queue is allowed to use. Note: The sum of the maxima of EF, AF1 and AF2 queue cannot exceed the configured maximum data rate od… |
| 1.3.6.1.4.1.6368.2.1.5.1.9 | ColumndslLinkCosRateLimitAF1 | read-write | current | Maximum rate in kB that the AF1 queue is allowed to use. Note: The sum of the maxima of EF, AF1 and AF2 queue cannot exceed the configured maximum data rate od… |
| 1.3.6.1.4.1.6368.2.2 | Nodev5 | |||
| 1.3.6.1.4.1.6368.2.2.1 | Tablev5CardTable | not-accessible | current | A table containing V5 card specific information |
| 1.3.6.1.4.1.6368.2.2.1.1 | Rowv5CardEntry | not-accessible | current | Row and index definition for V5 card table. |
| 1.3.6.1.4.1.6368.2.2.1.1.1 | Columnv5CardSlotNumber | not-accessible | current | Slot number for v5 card. |
| 1.3.6.1.4.1.6368.2.2.1.1.2 | Columnv5CardAdminState | read-create | current | This configuration attribute allows the administrator to enable or disable the operability of a device. unlocked The device is administratively permitted to pe… |
| 1.3.6.1.4.1.6368.2.2.1.1.3 | Columnv5CardAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.2.1.1.4 | Columnv5CardHardwareVersion | read-only | current | Hardware version of the V5 card. This is also called CHM-number (it always starts with the letters 'CHM'). Example: CHM40210WA0A2. The number '402' after the '… |
| 1.3.6.1.4.1.6368.2.2.1.1.5 | Columnv5CardManufacturer | read-only | current | Name of company which manufactured this V5 card. |
| 1.3.6.1.4.1.6368.2.2.1.1.6 | Columnv5CardName | read-only | current | User defined name of the V5 card. |
| 1.3.6.1.4.1.6368.2.2.1.1.7 | Columnv5CardOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.2.1.1.8 | Columnv5CardFirmwareVersion | read-only | current | Version number and build date of the firmware running on the V5 card. Example: '1.3 20020607 16:34' The format is 'major.minor YYYYMMDD hh:mm', where the field… |
| 1.3.6.1.4.1.6368.2.2.1.1.9 | Columnv5CardSerialNumber | read-only | current | Serial number of the V5 card. Also called HM-number, as it always starts with 'HM'. Example: HMHMZ014532139. |
| 1.3.6.1.4.1.6368.2.2.1.1.10 | Columnv5CardCommState | read-only | current | The Management Comm State indicates the state of the management connection between the PEM Server and the Data Card. disconnected No connection has been establ… |
| 1.3.6.1.4.1.6368.2.2.1.1.11 | Columnv5CardIsProvisioning | read-only | current | The V5 Card is in provisioning mode. Only if this flag is true, re-configuration of the V5 Card is possible. |
| 1.3.6.1.4.1.6368.2.2.1.1.12 | Columnv5CardClockMode | read-create | current | Clock mode of the V5 Card Master This card is the clock master. Slave This card is a clock slave. |
| 1.3.6.1.4.1.6368.2.2.1.1.13 | Columnv5CardClockSource1 | read-create | current | If the card is configured to be the clock master (v5CardClockMode), this property determines the source of the clock. Values range is 1 .. 8 or external clock … |
| 1.3.6.1.4.1.6368.2.2.1.1.14 | Columnv5CardClockSource2 | read-create | current | If the card is configured to be the clock master (v5CardClockMode), this property determines the source of the clock in case clock source 1 is not available. V… |
| 1.3.6.1.4.1.6368.2.2.1.1.15 | Columnv5CardProtocolVersion | read-create | current | The version of the V5 protocol. Can be either V5.1 or V5.2 |
| 1.3.6.1.4.1.6368.2.2.1.1.16 | Columnv5CardRowStatus | read-create | current | This object allows creation and deletion of V5 card table entries. The card can only be deleted when it is disconnected. V5 cards are always created with 512 u… |
| 1.3.6.1.4.1.6368.2.2.1.1.17 | Columnv5CardFlags | read-create | current | This object holds various flags which can be set to modify the behaviour of the V5 protocol stack. |
| 1.3.6.1.4.1.6368.2.2.1.1.18 | Columnv5CardETSIRelease | read-create | current | The ETSI release (version) of the V5 standard used for the V5 protocol on all V5 interface of the V5 card. This must not be confused with the choice of the V5 … |
| 1.3.6.1.4.1.6368.2.2.1.1.19 | Columnv5CardE1LineCode | read-create | current | The E1 line code used on all V5 links of the V5 card. |
| 1.3.6.1.4.1.6368.2.2.1.1.20 | Columnv5CardE1FrameFormat | read-create | current | The frame format of E1 frames used on all V5 links of the V5 card. |
| 1.3.6.1.4.1.6368.2.2.2 | Tablev5LinkTable | not-accessible | current | A table containing V5 link specific information |
| 1.3.6.1.4.1.6368.2.2.2.1 | Rowv5LinkEntry | not-accessible | current | Row and index definition for V5 link table. |
| 1.3.6.1.4.1.6368.2.2.2.1.1 | Columnv5LinkNumber | not-accessible | current | Number of the link on the V5 card (used for table indexing). |
| 1.3.6.1.4.1.6368.2.2.2.1.2 | Columnv5LinkAdminState | read-create | current | This configuration attribute allows the administrator to enable or disable the operability of a device. unlocked The device is administratively permitted to pe… |
| 1.3.6.1.4.1.6368.2.2.2.1.3 | Columnv5LinkAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.2.2.1.4 | Columnv5LinkId | read-create | current | V5 Link Identifier. Value range is 0 .. 255 |
| 1.3.6.1.4.1.6368.2.2.2.1.5 | Columnv5LinkOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.2.2.1.6 | Columnv5LinkInterface | read-create | current | Identifies to which V5 interface this V5 link is related. |
| 1.3.6.1.4.1.6368.2.2.2.1.7 | Columnv5LinkAlarmStatus | read-only | current | Alarm status of the V5 link. Bits assigned as follows: bit 0 LOS Loss of signal bit 1 LFA Loss of frame alignment bit 2 AIS Alarm indication signal bit 3 BERH … |
| 1.3.6.1.4.1.6368.2.2.2.1.8 | Columnv5LinkType | read-create | current | Specifies the type of V5 Link Primary The primary link carries all the important V5 Protocols. Therefore it needs to have at least one Physical Communi- cation… |
| 1.3.6.1.4.1.6368.2.2.2.1.9 | Columnv5LinkNumberOfPcc | read-create | current | The number of Physical Communication Channel (Physcommchan or PCC) configured on this V5 link. V5 links are structured as 8000 frames per second of 32 timeslot… |
| 1.3.6.1.4.1.6368.2.2.2.1.10 | Columnv5LinkPerfControlIndexOrZero | read-create | current | The value of this variable represents the index of a row within the perfControlTable. If the value is not 0, performance data (statistics) concerning this link… |
| 1.3.6.1.4.1.6368.2.2.2.1.11 | Columnv5LinkRowStatus | read-create | current | RowStatis variable that allows creation and deletion of V5 links. |
| 1.3.6.1.4.1.6368.2.2.2.1.12 | Columnv5LinkLineIdentifier | read-write | current | An idenifier assigned to the subscriber (customer). |
| 1.3.6.1.4.1.6368.2.2.3 | Tablev5InterfaceTable | not-accessible | current | A table containing V5 interface specific information. Only AN side interfaces are present. |
| 1.3.6.1.4.1.6368.2.2.3.1 | Rowv5InterfaceEntry | not-accessible | current | Row and index definition for V5 interface table. |
| 1.3.6.1.4.1.6368.2.2.3.1.1 | Columnv5InterfaceNumber | not-accessible | current | interface number, used for table indexing |
| 1.3.6.1.4.1.6368.2.2.3.1.2 | Columnv5InterfaceAdminState | read-create | current | This configuration attribute allows the administrator to enable or disable the operability of a device. unlocked The device is administratively permitted to pe… |
| 1.3.6.1.4.1.6368.2.2.3.1.3 | Columnv5InterfaceAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.2.3.1.4 | Columnv5InterfaceId | read-create | current | V5 Interface Identifier. Value range is 0 .. 16777215. |
| 1.3.6.1.4.1.6368.2.2.3.1.5 | Columnv5InterfaceOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.2.3.1.6 | Columnv5InterfaceVariantId | read-create | current | Indicates the V5 provisioning variant, which is currently valid. This is used to decide if the configuration is compliant with the LE. Value range is 0 .. 127. |
| 1.3.6.1.4.1.6368.2.2.3.1.7 | Columnv5InterfaceRowStatus | read-create | current | Variable to create and delete V5 interfaces. |
| 1.3.6.1.4.1.6368.2.2.3.1.8 | Columnv5InterfaceAlarmStatus | read-only | current | Displays the currently active alarms of the V5 interface. |
| 1.3.6.1.4.1.6368.2.2.4 | Tablev5LccTable | not-accessible | current | table containing all LCC (Logical Communication Channels) for a V5 interface |
| 1.3.6.1.4.1.6368.2.2.4.1 | Rowv5LccEntry | not-accessible | current | row defintion for the v5LccTable |
| 1.3.6.1.4.1.6368.2.2.4.1.1 | Columnv5LccNumber | not-accessible | current | index of the LCC; number in the range of 1..21 |
| 1.3.6.1.4.1.6368.2.2.4.1.2 | Columnv5LccIsProtected | read-create | current | If true, all information transported over this LCC is protected by the V5 Protection protocol (V5.2 only). |
| 1.3.6.1.4.1.6368.2.2.4.1.3 | Columnv5LccId | read-create | current | Unique L3 address per Logical Communication Channel. Value range is 0 .. 65535. |
| 1.3.6.1.4.1.6368.2.2.4.1.4 | Columnv5LccOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.2.4.1.5 | Columnv5LccPccV5LinkNumber | read-create | current | Identify (together with v5LccPccTimeslot) the Physical Communication Channel used for the signalling data of this Logical Communication Channel. |
| 1.3.6.1.4.1.6368.2.2.4.1.6 | Columnv5LccPccTimeslot | read-create | current | Identify (together with v5LccPccV5LinkNumber) the Physical Communication Channel used for the signalling data of this Logical Communication Channel. The value … |
| 1.3.6.1.4.1.6368.2.2.4.1.7 | Columnv5LccRowStatus | read-create | current | The value of this object can be active(1) in order for the value of v5LccPccV5LinkNumber or v5LccPccTimeslot to be modified. To set the PCC both attributes v5L… |
| 1.3.6.1.4.1.6368.2.2.5 | Tablev5IsdnPortTable | not-accessible | current | A table containing information specific to V5 ISDN user ports, i.e. S0 interfaces on IADs. |
| 1.3.6.1.4.1.6368.2.2.5.1 | Rowv5IsdnPortEntry | not-accessible | current | Row and index definition for V5 ISDN user port table. Sometimes, user ports are numbered 0..511 (8 cards @ 16 ltus @ 4 bras/ntu), with an implicit assignment o… |
| 1.3.6.1.4.1.6368.2.2.5.1.3 | Columnv5IsdnPortBRANumber | not-accessible | current | index number for this port |
| 1.3.6.1.4.1.6368.2.2.5.1.4 | Columnv5IsdnPortAdminState | read-write | current | This configuration attribute allows the administrator to enable or disable the operability of a device. unlocked The device is administratively permitted to pe… |
| 1.3.6.1.4.1.6368.2.2.5.1.5 | Columnv5IsdnPortOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.2.5.1.6 | Columnv5IsdnPortBlockingStatus | read-only | current | In the case of an unlocked/disabled status, this attribute indicates, if the disabled-state is due to local or remote reasons (ETS 300 376-1, A.2), (Definition… |
| 1.3.6.1.4.1.6368.2.2.5.1.7 | Columnv5IsdnPortBearer1Timeslot | read-write | current | Assigned bearer time slot number to port B1 channel. No assignment for V5.2 interfaces because the BCC protocol is used for dynamic assignment. In V5.1 the ass… |
| 1.3.6.1.4.1.6368.2.2.5.1.8 | Columnv5IsdnPortBearer2Timeslot | read-write | current | Assigned bearer time slot number to port B2 channel. No assignment for V5.2 interfaces because the BCC protocol is used for dynamic assignment. In V5.1 the ass… |
| 1.3.6.1.4.1.6368.2.2.5.1.9 | Columnv5IsdnPortEnvelopeFuncAddress | read-write | current | Layer 3 Address of this User Port. Value range is 0 .. 8175. |
| 1.3.6.1.4.1.6368.2.2.5.1.10 | Columnv5IsdnPortIsActivated | read-only | current | Layer 1 activation status |
| 1.3.6.1.4.1.6368.2.2.5.1.11 | Columnv5IsdnPortAlarmStatus | read-only | current | displays the currently active alarms for the ISDN port |
| 1.3.6.1.4.1.6368.2.2.5.1.12 | Columnv5IsdnPortActiveLoop | read-write | obsolete | |
| 1.3.6.1.4.1.6368.2.2.5.1.13 | Columnv5IsdnPortV5CardSlotNumber | read-only | current | Slot number of V5 card which owns this user port configuration. Physically, user ports are on IAD devices. Logically, their configuration is part of the V5 con… |
| 1.3.6.1.4.1.6368.2.2.5.1.14 | Columnv5IsdnPortV5InterfaceNumber | read-write | current | The V5 interface whose V5 links provide signalling and B channel capacity for this user port. The value zero appears only after creation. Once a non-zero value… |
| 1.3.6.1.4.1.6368.2.2.5.1.15 | Columnv5IsdnPortDSignallingCommChan | read-write | current | The ISDN Communication Path over which the D-Signalling control information of this User Port is transported. |
| 1.3.6.1.4.1.6368.2.2.5.1.16 | Columnv5IsdnPortFrameCommChan | read-write | current | The ISDN Communication Path over which the Frame control information of this User Port is transported. |
| 1.3.6.1.4.1.6368.2.2.5.1.17 | Columnv5IsdnPortPacketCommChan | read-write | current | The ISDN Communication Path over which the Packet control information of this User Port is transported. |
| 1.3.6.1.4.1.6368.2.2.5.1.18 | Columnv5IsdnPortLineIdentifier | read-write | current | An idenifier assigned to the subscriber (customer). |
| 1.3.6.1.4.1.6368.2.3 | Nodedata | |||
| 1.3.6.1.4.1.6368.2.3.1 | TabledataCardTable | not-accessible | current | attributes concerning the data switch (slot 1) |
| 1.3.6.1.4.1.6368.2.3.1.1 | RowdataCardEntry | not-accessible | current | entry/row within the dataCardTable |
| 1.3.6.1.4.1.6368.2.3.1.1.1 | ColumndataCardSlotNumber | not-accessible | current | Position of the slot card in the rack. |
| 1.3.6.1.4.1.6368.2.3.1.1.2 | ColumndataCardAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.3.1.1.3 | ColumndataCardHardwareVersion | read-only | current | Hardware Version Number of the data card. This is also called CHM-number (it always starts with the letters 'CHM'). Example: CHM40310WA0A2. The number '403' af… |
| 1.3.6.1.4.1.6368.2.3.1.1.4 | ColumndataCardManufacturer | read-only | current | Manufacturer of the data card. |
| 1.3.6.1.4.1.6368.2.3.1.1.5 | ColumndataCardName | read-only | current | User defined name of the data card. |
| 1.3.6.1.4.1.6368.2.3.1.1.6 | ColumndataCardOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.3.1.1.7 | ColumndataCardFirmwareVersion | read-only | current | Version number and build date of the firmware running on the data card. Example: '1.3 20020607 16:34' The format is 'major.minor YYYYMMDD hh:mm', where the fie… |
| 1.3.6.1.4.1.6368.2.3.1.1.8 | ColumndataCardSerialNumber | read-only | current | Serial number of the data card. Also called HM-number, as it always starts with 'HM'. Example: HMHMZ014332080. |
| 1.3.6.1.4.1.6368.2.3.1.1.9 | ColumndataCardCommState | read-only | current | The Management Comm State indicates the state of the management connection between the PEM Server and the Data Card. disconnected No connection has been establ… |
| 1.3.6.1.4.1.6368.2.3.1.1.10 | ColumndataCardVLANMode | read-write | current | If true(1), enhanced switching (trunk assignment according to setting in DSL link configuration) is enabled. Otherwise transparent switching (any DSL link to a… |
| 1.3.6.1.4.1.6368.2.3.2 | TabledataPortTable | not-accessible | current | The table contains an entry for each Ethernet trunk on the data switch (card). |
| 1.3.6.1.4.1.6368.2.3.2.1 | RowdataPortEntry | not-accessible | current | entry within the dataPortTable |
| 1.3.6.1.4.1.6368.2.3.2.1.1 | ColumndataPortNumber | not-accessible | current | index of the (ethernet) trunk on the data switch |
| 1.3.6.1.4.1.6368.2.3.2.1.2 | ColumndataPortAdminState | read-write | current | This configuration attribute allows the administrator to enable or disable the operability of a device. unlocked The device is administratively permitted to pe… |
| 1.3.6.1.4.1.6368.2.3.2.1.3 | ColumndataPortOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.3.2.1.4 | ColumndataPortAvailabilityStatus | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.3.2.1.5 | ColumndataPortSpeed | read-write | current | This object allows specification of options for three areas: crossover Normally, DTE and hub sockets are wired such that they can connect with a straight-throu… |
| 1.3.6.1.4.1.6368.2.3.2.1.6 | ColumndataPortFlowControl | read-write | current | Setting of Flow Control according to IEEE 802.3x. Auto Enables auto negotiation of IEEE 802.3x flow control when in full-duplex mode. On Force flow control ope… |
| 1.3.6.1.4.1.6368.2.4 | NodepegasusSystem | |||
| 1.3.6.1.4.1.6368.2.4.1 | ScalarautoPersistDelay | read-write | current | If Auto Persist Config is enabled, this is the delay (in seconds) after which the configuration is persisted on the PEM Server. The default value is: 10s. |
| 1.3.6.1.4.1.6368.2.4.2 | ScalarautoPersistEnabled | read-write | current | Determines, whether configuration changes are made persistent automatically (a certain interval after the last change of a configuration attribute) or explicit… |
| 1.3.6.1.4.1.6368.2.4.3 | ScalarconfigPriority | read-write | current | Determines, which configuration is used in case of a configuration mismatch. Possible values: Server or device. Device: The device config is used (replaces ser… |
| 1.3.6.1.4.1.6368.2.4.4 | ScalarhwAdaptionPolicy | read-write | obsolete | In case of a hardware mismatch (the configured device does not match with the one detected in the rack): shall the PEM Server be reconfigured with the new devi… |
| 1.3.6.1.4.1.6368.2.4.5 | ScalaripBaseAddress | read-write | current | Base address for the computation of the IP addresses for the management interfaces of the cards. When the PEMServer wants to connect to a card in the rack, it … |
| 1.3.6.1.4.1.6368.2.4.6 | ScalarjavaRuntimeVersion | read-only | current | Version of the installed Java Runtime. |
| 1.3.6.1.4.1.6368.2.4.7 | ScalarjavaVMName | read-only | current | Name of the installed Java virtual machine. |
| 1.3.6.1.4.1.6368.2.4.8 | ScalarjavaVMVersion | read-only | current | Version of the installed Java virtual machine on the work-station. |
| 1.3.6.1.4.1.6368.2.4.9 | ScalarmgmtIPAddress | read-only | current | The IP Address of the PEGASUS system through which the PEM Server is accessible. |
| 1.3.6.1.4.1.6368.2.4.11 | ScalarosArchitecture | read-only | current | Displays information about the operating system where the PEM server is running. |
| 1.3.6.1.4.1.6368.2.4.12 | ScalarosNameAndVersion | read-only | current | Name and version of the operating system that is running on the workstation where the PEM server is running. |
| 1.3.6.1.4.1.6368.2.4.13 | ScalarpemVersion | read-only | current | The version of the PEM Software that is installed on the PEGASUS system. |
| 1.3.6.1.4.1.6368.2.4.14 | ScalarstartedBy | read-only | current | The username of the person that started the PEM server. |
| 1.3.6.1.4.1.6368.2.4.15 | ScalarsystemNumber | read-only | current | A number between 0 and 31 which uniquely identifies a PEGASUS system within a subnet. The system number is identified by the HW. |
| 1.3.6.1.4.1.6368.2.4.16 | ScalarmibRevision | read-only | current | The version number assigned by the version control system. You can query this from the agent, to find out with which version of the MIB was built into the agen… |
| 1.3.6.1.4.1.6368.2.4.17 | ScalarreadCommunity | read-write | current | SNMP operations with this community name are given read access to all variables in the MIB. |
| 1.3.6.1.4.1.6368.2.4.18 | ScalarwriteCommunity | read-write | current | SNMP operations with this community name are given read access to all variables in the MIB, and write access to all writable variables in the MIB. Note that yo… |
| 1.3.6.1.4.1.6368.2.4.19 | ScalartrapCommunity | read-write | current | This community name is used for SNMPv1 or SNMPv2c traps sent by the Pegasus system. |
| 1.3.6.1.4.1.6368.2.4.20 | ScalartrapDestination | read-write | current | IP number of the system to receive traps from the Pegasus system. If this variable is set to the empty string, the Pegasus system sends no traps. |
| 1.3.6.1.4.1.6368.2.4.21 | ScalaragentPort | read-write | current | UDP port number of the SNMP agent on the Pegasus system. The initial value is the standard SNMP port number for SNMP, 161. If this variable is set to a non-zer… |
| 1.3.6.1.4.1.6368.2.4.22 | ScalarauthRespEnabled | read-write | obsolete | If authentication/authorization fails for an SNMP request, the agent normally replies with an SNMP standard error message. If this variable is set to false(2),… |
| 1.3.6.1.4.1.6368.2.4.23 | ScalarrackAlarmStatus | read-only | current | Shows the alarms currently set for the Pegasus rack. |
| 1.3.6.1.4.1.6368.2.7 | Nodeperf | |||
| 1.3.6.1.4.1.6368.2.7.1 | ScalarperfSweepCyclePeriod | read-write | current | Time in seconds between attempts to clear unused performance history data. Performance history can take a lot of memory. If the manager fails to delete entries… |
| 1.3.6.1.4.1.6368.2.7.2 | TableperfControlTable | not-accessible | current | The table is used to control the gathering of G.826 statistics. This is currently possible for DSL interfaces and V5 links. If it's desired to get statstic sam… |
| 1.3.6.1.4.1.6368.2.7.2.1 | RowperfControlEntry | not-accessible | current | Definition of a row within the perfControlTable. Such a row contains information about the monitored subject (currently DSL interfaces and V5 links) and the st… |
| 1.3.6.1.4.1.6368.2.7.2.1.1 | ColumnperfControlIndex | not-accessible | current | index of perfControlEntries |
| 1.3.6.1.4.1.6368.2.7.2.1.2 | ColumnperfControlStatus | read-only | current | This is a set of bits giving information on the status of this entry of the perfControlTable. The meaning of the individual bits is as follows: bit name Descri… |
| 1.3.6.1.4.1.6368.2.7.2.1.3 | ColumnperfControlLinkDescr | read-only | current | Description of the interface or link using this perfControlEntry. If the perfControlEntry is busy, the value is a textual description of the object referencing… |
| 1.3.6.1.4.1.6368.2.7.2.1.4 | ColumnperfControlUpdatePeriod | read-create | current | Time interval in seconds to wait between querying the performance history data from the device. Minimum value is 1 second. Shorter values yield more accurate/u… |
| 1.3.6.1.4.1.6368.2.7.2.1.5 | ColumnperfControlEffectiveUpdatePeriod | read-only | obsolete | If several clients monitor the same V5 link or DSL interface, each sets its own update period. The server then computes the greatest common divisor of all valu… |
| 1.3.6.1.4.1.6368.2.7.2.1.6 | ColumnperfControlRowStatus | read-create | current | Attribute to create and delete rows dynamically. |
| 1.3.6.1.4.1.6368.2.7.3 | TableperfDataTable | not-accessible | current | G.826 statistics table for DSL interfaces and V5 links. Each entry is associated to exactly one perfControlEntry that represents the link between the DSL inter… |
| 1.3.6.1.4.1.6368.2.7.3.1 | RowperfDataEntry | not-accessible | current | Each perfDataEntry is associated with exactly one perfControlEntry row through the perfControlIndex instance which is part of the index. |
| 1.3.6.1.4.1.6368.2.7.3.1.1 | ColumnperfDataKind | not-accessible | current | The second position in the index, shows the type of history - either 'history15m' (15 minute history) or 'history24h' (24 hour history). |
| 1.3.6.1.4.1.6368.2.7.3.1.2 | ColumnperfDataIndex | not-accessible | current | Register number. Each register has 5 values (ES/SES/UAS/CV/LOSWS). The 15 minute history has 32 history registers, indexed from 1 to 32. Each accumulates its m… |
| 1.3.6.1.4.1.6368.2.7.3.1.3 | ColumnperfDataES | read-only | current | Number of errored seconds. An errored second is one with at least one CRC anomaly (see perfDataCV below) and/or at least one LOSW defect (see perfDataLOSWS bel… |
| 1.3.6.1.4.1.6368.2.7.3.1.4 | ColumnperfDataSES | read-only | current | Number of severely errored seconds. A severely errored second is one with 50 or more CRC anomalies (see perfDataCV below) or at least one LOSW defect (see perf… |
| 1.3.6.1.4.1.6368.2.7.3.1.5 | ColumnperfDataUAS | read-only | current | Number of unavailable seconds. Seconds from the beginning of 10 or more SES (perfDataSES) to the beginning of 10 or more non-SES are considered as unavailable.… |
| 1.3.6.1.4.1.6368.2.7.3.1.6 | ColumnperfDataCV | read-only | current | Number of error checking code faults (the usual error checking code is CRC). DSL links are structured as 166 2/3 frames per second, each with a CRC value. This… |
| 1.3.6.1.4.1.6368.2.7.3.1.7 | ColumnperfDataLOSWS | read-only | current | Number of seconds with one or more LOSW defects (loss of frame synchronization word). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AvailabilityStatusElem | BITS { inTest(0), failed(1), powerOff(2), offLine(3), offDuty(4), dependency(5), degraded(6), notInstalled(7), logFull(8) } CommStateEnum ::= INTEGER { disconnected(1), init(2), identification(3), checkHw(4), hwAdaption(5), checkHwVers(6), wrongProgram(7), checkConfig(8), downloadConfig(9), uploadConfig(10), statusSynch(11), resetting(12), inactive(13), active(14) } DataPortSpeedEnum ::= INTEGER { autoCrossoverAndPortSpeed(1), autoNegotiationPortSpeed(2), base100TFullDuplex(3), base100THalfDuplex(4), base10TFullDuplex(5), base10THalfDuplex(6), unknown(7) } DataPortFlowControlEnum ::= INTEGER { autoNegotiationFlowControl(1), onFlowControl(2), offFlowControl(3), unknown(4) } SlotNumber ::= INTEGER(1..12) DataCardSlotNumber ::= INTEGER(1..2) V5SlotNumber ::= INTEGER(3..4) DslSlotNumber ::= INTEGER(5..12) DslLinkNumber ::= INTEGER(1..16) TrunkNumber ::= INTEGER(1..5) TrunkNumberOrZero ::= INTEGER(0..5) Priority ::= INTEGER(0..7) DslLinkLoopEnum ::= INTEGER { none(1), loop1(2), loop2(3) } | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: inTest The device is under test. failed The device has an inte… |
| CosClassmap | OCTET STRING (SIZE (0..8)) | current | Meaning and length of the octet string depends on the value of dslLinkCOSClassifier. If vlanPriority(1) is used, only the first octet is valid. Each bit represents the number of a vlan that is used for the particular qu… |
| DslCardAlarmStatus | BITS { intercom(0) } | current | Bitset to represent alarms on a DSL card. |
| DslLinkAlarmElem | BITS { config(0), service(1) } DslLinkPSDMaskEnum ::= INTEGER { symmetric(1), asymmetric(2) } | current | Bitset to represent alarms on a DSL link. |
| DslPerformanceStatusElem | BITS { att(0), losw(1) } | current | Possible status values or alarms for a DSL interface. |
| IadAlarmStatusElem | BITS { powerdown(0), lifeline(1), dcContinuity(2) } IadISDNPoweringEnum ::= INTEGER { off(1), normal(2), lifeline(3), always(4) } IadPOTSPoweringEnum ::= INTEGER { off(1), always(2) } | current | Bitset to represent alarms on a IAD. |
| PerfControlStatus | BITS { busy(0), offline(1), data(2), marked(3) } | current | status of a performance control entry |
| RackAlarmStatusElem | BITS { psu1Failure(0), psu2Failure(1), fanFailure(2), urgentExt(3), nonUrgentExt(4) } | current | possible alarms concerning the Pegasus rack |
| V5CardFlagSet | BITS { noFastAlign(0), noLinkId(1), autoPortUnblock(2), retryAutoPortUnblock(3), rejectLinkId(4), forcePSTNDL(5), slowStart(6), deallocBlockedPort(7) } | current | Possible configuration flags that can be applied to the V5 card. |
| V5InterfaceAlarmSet | BITS { idFailure(0), provisioningMismatch(1) } | current | Bitset that contains the possible alarms for a V5 interface |
| V5IsdnPortAlarmStatusElem | BITS { l1ActivationFault(0), losTref(1), losDsig(2) } V5TimeslotNumber ::= INTEGER (1 .. 15 | 17 .. 31) V5EnvelopeFuncAddress ::= INTEGER (0 .. 8175) | current | Bitset representing the possible alarms for a ISDN port. |
| V5LinkAlarmStatusElem | BITS { v5LinkAlarmLOS(0), v5LinkAlarmLFA(1), v5LinkAlarmAIS(2), v5LinkAlarmBERH(3), v5LinkAlarmEXTLOC(4), v5LinkAlarmRAI(5), v5LinkAlarmIdFailure(6) } V5LinkTypeEnum ::= INTEGER { primary(1), secondary(2), normal(3) } | current | Bitset that represents all possible alarms for a V5 link. |