PERLE-IOLAN-SDS-MIB
1979 objects
The private MIB module for the Perle IOLAN SDS, SCS and STS
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1966 | Nodeperle | |||
| 1.3.6.1.4.1.1966.12 | IdentitysdsMIB | The private MIB module for the Perle IOLAN SDS, SCS and STS | ||
| 1.3.6.1.4.1.1966.12.1 | NodesdsMIBObjects | |||
| 1.3.6.1.4.1.1966.12.1.1 | NodeadminInfo | |||
| 1.3.6.1.4.1.1966.12.1.1.1 | ScalaradminFunction | read-write | current | Perform a specific function on the Device Server. If you want to save all the changes that have been submitted to the Device Server, you need to expand the adm… |
| 1.3.6.1.4.1.1966.12.1.1.2 | ScalaradminLastFunction | read-only | current | The last function requested |
| 1.3.6.1.4.1.1966.12.1.1.3 | ScalaradminStatus | read-only | current | The status of the last function performed. |
| 1.3.6.1.4.1.1966.12.1.1.4 | ScalaradminSystemDate | read-write | current | The system date. Format dd/mm/yyyy |
| 1.3.6.1.4.1.1966.12.1.1.5 | ScalaradminSystemTime | read-write | current | The system time (local time). Format hh:mm:ss |
| 1.3.6.1.4.1.1966.12.1.1.6 | ScalaradminKillLine | read-write | current | Enter the line number you want to reset |
| 1.3.6.1.4.1.1966.12.1.1.7 | ScalaradminGetClusteredSlavePortNames | read-write | current | Set the clustered slave IP address in order to retrieve its serial port names. |
| 1.3.6.1.4.1.1966.12.1.1.8 | ScalaradminPowerOn | read-write | current | Turn on the power of the whole line(if the line is not a power management line) or a plug (the line is a power management line), and the input format is line#:… |
| 1.3.6.1.4.1.1966.12.1.1.9 | ScalaradminPowerOff | read-write | current | Turn off the power of the whole line(if the line is not a power management line) or a plug (the line is a power management line), and the input format is line#… |
| 1.3.6.1.4.1.1966.12.1.1.10 | ScalaradminPowerBoot | read-write | current | Boot the whole line(if the line is not a power management line) or a plug (the line is a power management line), and the input format is line#:plug#(1 based). |
| 1.3.6.1.4.1.1966.12.1.1.11 | ScalaradminPowerReset | read-write | current | Reset whole line(only if the line is a power management line), and the input is the line number(1 based). |
| 1.3.6.1.4.1.1966.12.1.1.12 | ScalaradminPowerStatus | read-write | current | Return the status of a plug (the line is a power management line). The input format is line#:plug#(1 based). The output is one of following strings: 'off', 'on… |
| 1.3.6.1.4.1.1966.12.1.1.13 | ScalaradminIpsec | read-write | current | IPsec functions. |
| 1.3.6.1.4.1.1966.12.1.1.14 | ScalaradminPowerMonitorOn | read-write | current | Enable host monitoring for a power plug, on a serial port configured for power management. The input format is line#:plug#. e.g. Use '5:10' for serial port 5, … |
| 1.3.6.1.4.1.1966.12.1.1.15 | ScalaradminPowerMonitorOff | read-write | current | Disable host monitoring for a power plug, on a serial port configured for power management. The input format is line#:plug#. e.g. Use '5:10' for serial port 5,… |
| 1.3.6.1.4.1.1966.12.1.1.16 | ScalaradminPowerMonitorStatus | read-write | current | Return the status of the host monitoring feature for a power plug, on a serial port configured for power management. The input format is line#:plug#. The outpu… |
| 1.3.6.1.4.1.1966.12.1.1.17 | ScalaradminPowerMonitorNumberOfReboots | read-write | current | Return the number of power cycles (reboots) initiated by the host monitoring feature for a power plug, on a serial port configured for power management. The in… |
| 1.3.6.1.4.1.1966.12.1.1.18 | ScalaradminPowerMonitorLastRebootTime | read-write | current | Returns the time of the last power cycle (reboot), initiated by the host monitoring feature for a power plug, on a serial port configured for power management.… |
| 1.3.6.1.4.1.1966.12.1.1.19 | ScalaradminPowerMonitorResetRebootInfo | read-write | current | Reset the monitor reboot information (number of reboots and time of last reboot. The input format is line#:plug#. e.g. Use '5:10' for serial port 5, plug 10. |
| 1.3.6.1.4.1.1966.12.1.1.20 | ScalaradminResetSerialStatistics | read-write | current | Enter the line number you want to reset statistics |
| 1.3.6.1.4.1.1966.12.1.1.21 | ScalaradminChassisSerialNumber | read-only | current | Chassis Serial Number |
| 1.3.6.1.4.1.1966.12.1.1.22 | ScalaradminSlot1SerialNumber | read-only | current | Slot 1 Serial Number |
| 1.3.6.1.4.1.1966.12.1.1.23 | ScalaradminSlot2SerialNumber | read-only | current | Slot 2 Serial Number |
| 1.3.6.1.4.1.1966.12.1.1.24 | ScalaradminSlot3SerialNumber | read-only | current | Slto 3 Serial Number |
| 1.3.6.1.4.1.1966.12.1.1.25 | ScalaradminLTECardSerialNumber | read-only | current | LTE CardSerial Number |
| 1.3.6.1.4.1.1966.12.1.1.26 | ScalaradminWIFICardSerialNumber | read-only | current | WIFI Card Serial Number |
| 1.3.6.1.4.1.1966.12.1.1.27 | ScalaradminPartNumber | read-only | current | Device part Number |
| 1.3.6.1.4.1.1966.12.1.1.28 | ScalaradminTemperature | read-only | current | IOLAN Internal temperature |
| 1.3.6.1.4.1.1966.12.1.2 | NodeserverInfo | |||
| 1.3.6.1.4.1.1966.12.1.2.1 | ScalarserverStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.2.2 | ScalarserverName | read-write | current | The name of the Device Server. |
| 1.3.6.1.4.1.1966.12.1.2.3 | ScalarserverDomainName | read-write | current | The domain name of the Device Server. |
| 1.3.6.1.4.1.1966.12.1.2.4 | ScalarserverIPaddress | read-write | current | The Device Server's unique IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank. |
| 1.3.6.1.4.1.1966.12.1.2.5 | ScalarserverSubnetBits | read-write | current | The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the v… |
| 1.3.6.1.4.1.1966.12.1.2.6 | ScalarserverPortBuffering | read-write | current | Specifies where the port buffer log is kept, either Off, Local, Remote, or Both. If Remote or Both is selected, you must specify an NFS server location for the… |
| 1.3.6.1.4.1.1966.12.1.2.7 | ScalarserverViewPortBufferString | read-write | current | The string (up to 8 characters) used by a a session connected to a serial port to display the port buffer for that particular serial port. You can specify cont… |
| 1.3.6.1.4.1.1966.12.1.2.8 | ScalarserverTimeStamping | read-write | current | Enable/disable time stamping of the port buffer data. |
| 1.3.6.1.4.1.1966.12.1.2.9 | ScalarserverSessionEscapeString | read-write | current | The key sequence to escape the current session and display the session options. |
| 1.3.6.1.4.1.1966.12.1.2.10 | ScalarserverNFSHostName | read-write | current | The NFS host that the Device Server will use for its Remote Port Buffering feature. The Device Server will open a file on the NFS host for each reverse SSH or … |
| 1.3.6.1.4.1.1966.12.1.2.11 | ScalarserverNFSDirectory | read-write | current | The directory and/or subdirectories where the Remote Port Buffering files will be created. This field is used when Port Buffering Mode is set to Remote or Both… |
| 1.3.6.1.4.1.1966.12.1.2.12 | ScalarserverNFSEncryption | read-write | current | Determines if the data sent to the NFS host is sent encrypted or in the clear across the LAN. The default is set of Off. NOTE: When NFS encryption is enabled, … |
| 1.3.6.1.4.1.1966.12.1.2.13 | ScalarserverPortMenuString | read-write | current | The string (up to 8 characters) used by a a session connected to a serial port to display the port buffer for that particular serial port. You can specify cont… |
| 1.3.6.1.4.1.1966.12.1.2.15 | ScalarserverBreakEnabled | read-write | current | Enables/disables proprietary inband SSH break signal processing as well as the existing Reverse Telnet break signal. This parameter can also enable/disable the… |
| 1.3.6.1.4.1.1966.12.1.2.16 | ScalarserverBanner | read-write | current | If enabled, displays a product identification banner before login prompts. Default is off. |
| 1.3.6.1.4.1.1966.12.1.2.17 | ScalarserverSecurity | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the hosts table. |
| 1.3.6.1.4.1.1966.12.1.2.18 | ScalarserverPromptWithName | read-write | current | If enabled, the Device Server name will be included in login prompts, command line prompts, etc. |
| 1.3.6.1.4.1.1966.12.1.2.19 | ScalarserverPasswordLimit | read-write | current | The number of attempts a user is allowed to enter a password for a port. If this limit is exceeded, the port is disabled for 5 minutes. A user with Admin level… |
| 1.3.6.1.4.1.1966.12.1.2.20 | ScalarserverOemLogin | read-write | current | When set, and a custom language file is in use, the login prompt will use the string defined in the language file as the login prompt instead of the default pr… |
| 1.3.6.1.4.1.1966.12.1.2.21 | ScalarserverBypassPassword | read-write | current | When set, authorized users who do not have a password set, with the exception of the Admin user, WILL NOT be prompted for a password at login with Local Authen… |
| 1.3.6.1.4.1.1966.12.1.2.22 | ScalarserverSingleTelnet | read-write | current | Sets all reverse connections to a one connection at a time mode. Server-side applications will get a (socket) connection refused until: All data from previous … |
| 1.3.6.1.4.1.1966.12.1.2.23 | ScalarserverFlushOnClose | read-write | current | When enabled, deletes any pending data when a port is closed; as opposed to maintaining the port to send pending data. Default is Off. |
| 1.3.6.1.4.1.1966.12.1.2.24 | ScalarserverPrimaryAuthMethod | read-write | current | The first authentication method that the Device Server attempts. Some type of authentication must be done by the Device Server. |
| 1.3.6.1.4.1.1966.12.1.2.25 | ScalarserverSecondaryAuthMethod | read-write | current | If the Primary Authentication Method fails, the next authentication method that the Device Server attempts. You can choose to use authentication methods in com… |
| 1.3.6.1.4.1.1966.12.1.2.26 | ScalarserverEthernetSpeedDuplex | read-write | current | Define the Ethernet connection speed at one of the following: automatically detects the Ethernet interface speed and duplex 10 Mbps Half Duplex 10 Mbps Full Du… |
| 1.3.6.1.4.1.1966.12.1.2.27 | ScalarserverTFTPRetry | read-write | current | The number of times the Device Server will attempt to transfer (using TFTP) a file to/from a host. Default is 5. A value of 0 (zero) means that the Device Serv… |
| 1.3.6.1.4.1.1966.12.1.2.28 | ScalarserverTFTPTimeOut | read-write | current | The time, in seconds, that the Device Server will wait for a successful transmit or receipt of TFTP packets before retrying a TFTP transfer. Default is 3 secon… |
| 1.3.6.1.4.1.1966.12.1.2.29 | ScalarserverEnableGuestLogin | read-write | current | Allow users who are not defined in the User database to log into the Device Server with any user ID and the specified password. Guest users inherit their setti… |
| 1.3.6.1.4.1.1966.12.1.2.30 | ScalarserverSecondaryIPaddress | read-write | current | The Device Server's eth2 IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank. |
| 1.3.6.1.4.1.1966.12.1.2.31 | ScalarserverSecondarySubnetBits | read-write | current | The number of bits in the eth2 subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When … |
| 1.3.6.1.4.1.1966.12.1.2.32 | ScalarserverEthSecondarySpeedDuplex | read-write | current | Define the Ethernet connection speed at one of the following: automatically detects the Ethernet interface speed and duplex 10 Mbps Half Duplex 10 Mbps Full Du… |
| 1.3.6.1.4.1.1966.12.1.2.33 | ScalarserverDHCPUpdateDNSPrimary | read-write | current | If enabled, the DNS server will be updated after the device server gets the IP address via DHCP. |
| 1.3.6.1.4.1.1966.12.1.2.34 | ScalarserverPowerManagementMenuString | read-write | current | Menu String for power management . |
| 1.3.6.1.4.1.1966.12.1.2.35 | ScalarserverActiveStandbyEnabled | read-write | current | Enable/disable active standby. |
| 1.3.6.1.4.1.1966.12.1.2.36 | ScalarserverActiveStandbyMiimon | read-write | current | Time in msec for frequency in MII link monitoring. |
| 1.3.6.1.4.1.1966.12.1.2.37 | ScalarserverActiveStandbyUpdelay | read-write | current | Delay in enabling a link after the 'link up' status has been detected |
| 1.3.6.1.4.1.1966.12.1.2.38 | ScalarserverDropSessionDetectionTime | read-write | current | Dropped session detection time |
| 1.3.6.1.4.1.1966.12.1.2.39 | ScalarserverAutoObtainDNS | read-write | current | If enabled, the DNS server IP address will be get automatically via DHCP. |
| 1.3.6.1.4.1.1966.12.1.2.40 | ScalarserverAutoObtainWINS | read-write | current | If enabled, the WINS server IP address will be get automatically via DHCP. |
| 1.3.6.1.4.1.1966.12.1.2.41 | ScalarserverAutoObtainGW | read-write | current | If enabled, the default gateway IP address will be get automatically via DHCP. |
| 1.3.6.1.4.1.1966.12.1.2.42 | ScalarserverAlwaysAttemptSecond | read-write | current | If enabled, the secondary authentication method will always be used. |
| 1.3.6.1.4.1.1966.12.1.2.43 | ScalarserverDHCPUpdateDNSSecondary | read-write | current | If enabled, the DNS server will be updated for the secondary Ethernet interface after the device server gets the IP address via DHCP. |
| 1.3.6.1.4.1.1966.12.1.2.44 | ScalarserverDomainPrefixPrimary | read-write | current | The domain prefix for primary Ethernet interface of the Device Server. |
| 1.3.6.1.4.1.1966.12.1.2.45 | ScalarserverDomainPrefixSecondary | read-write | current | The domain prefix for secondary Ethernet interface of the Device Server. |
| 1.3.6.1.4.1.1966.12.1.2.46 | ScalarserverPortBufferSyslog | read-write | current | Output port buffer to syslog. |
| 1.3.6.1.4.1.1966.12.1.2.47 | ScalarserverPortBufferKeyStroke | read-write | current | Turn on port buffer keystroke. |
| 1.3.6.1.4.1.1966.12.1.2.48 | ScalarserverIpsecUseNat | read-write | current | Enable or disable NAT traversal for IPsec. |
| 1.3.6.1.4.1.1966.12.1.2.49 | ScalarserverAutoObtainDNSV6 | read-write | current | If enabled, the DNS server IP address will be obtained automatically via DHCPv6. |
| 1.3.6.1.4.1.1966.12.1.2.50 | ScalarserverAuthenticateAdminlocal | read-write | current | If enabled, admin user will be only authenticated locally. |
| 1.3.6.1.4.1.1966.12.1.2.51 | ScalarserverDisplayMotdWeb | read-write | current | If enabled, the WebManager will display message of the day. |
| 1.3.6.1.4.1.1966.12.1.2.52 | ScalarserverGenericWebLoginScreen | read-write | current | If enabled, the WebManager will not display device server's information on login screen. |
| 1.3.6.1.4.1.1966.12.1.2.54 | ScalarserverNfsHostTunnel | read-write | current | The HTTP tunnel associated with the port buffering NFS host. |
| 1.3.6.1.4.1.1966.12.1.2.55 | ScalarserverPortBufferSyslogLevel | read-write | current | Specify the syslog level to use for port buffering |
| 1.3.6.1.4.1.1966.12.1.2.56 | ScalarserverEasyPortWebClient | read-write | current | Specifies the telnet/SSH client for EasyPortWeb. Select 'java' to use the Java applet client. Select 'javascript' to use the web browser-based client. |
| 1.3.6.1.4.1.1966.12.1.2.57 | ScalarserverDataLoggingBufferSize | read-write | current | Specifies the buffer size for Data Logging. |
| 1.3.6.1.4.1.1966.12.1.2.58 | ScalarserverDataLoggingOptions | read-write | current | Specifies whether data logging should be backword compatible with versions of firmware prior to Version 4.3. |
| 1.3.6.1.4.1.1966.12.1.2.59 | ScalarserverKeepAliveRetries | read-write | current | Specifies the number of time the iolan will retry the TCP keepalive message. |
| 1.3.6.1.4.1.1966.12.1.2.60 | ScalarserverKeepAliveTimeout | read-write | current | Specifies the time to wait for a tcp keepalive message response. |
| 1.3.6.1.4.1.1966.12.1.2.61 | ScalarserverEth0MTU | read-write | current | Specifies the size of the ethernet MTU. |
| 1.3.6.1.4.1.1966.12.1.2.62 | ScalarserverEth1MTU | read-write | current | Specifies the size of the ethernet MTU. |
| 1.3.6.1.4.1.1966.12.1.2.63 | ScalarserverTFTPHost | read-write | current | The name of the TFTP host. |
| 1.3.6.1.4.1.1966.12.1.2.64 | ScalarserverTFTPTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.2.65 | ScalarserverSecurityRange | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. |
| 1.3.6.1.4.1.1966.12.1.2.66 | ScalarserverRangeStartIPaddress | read-write | current | The start IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.67 | ScalarserverRangeEndIPaddress | read-write | current | The end IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.68 | ScalarserverAccountLockOut | read-write | current | If enabled, the server will lock out the user after a number of invalid login attempts. |
| 1.3.6.1.4.1.1966.12.1.2.69 | ScalarserverLoginOnce | read-write | current | If enabled, the server will only allow a user to login once. |
| 1.3.6.1.4.1.1966.12.1.2.70 | ScalarserverPasswordRules | read-write | current | If enabled, the server will enforce the password rules for the user password. |
| 1.3.6.1.4.1.1966.12.1.2.71 | ScalarserverDisableWebCaching | read-write | current | If enabled, the server will disable caching in the web browser. |
| 1.3.6.1.4.1.1966.12.1.2.72 | ScalarserverDisableIpForwarding | read-write | current | If enabled, the server will disable IP forwarding between ethernet interfaces. |
| 1.3.6.1.4.1.1966.12.1.2.73 | ScalarserverSecurityRange2 | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. |
| 1.3.6.1.4.1.1966.12.1.2.74 | ScalarserverRangeStartIPaddress2 | read-write | current | The start IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.75 | ScalarserverRangeEndIPaddress2 | read-write | current | The end IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.76 | ScalarserverSecurityRange3 | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. |
| 1.3.6.1.4.1.1966.12.1.2.77 | ScalarserverRangeStartIPaddress3 | read-write | current | The start IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.78 | ScalarserverRangeEndIPaddress3 | read-write | current | The end IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.79 | ScalarserverSecurityRange4 | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. |
| 1.3.6.1.4.1.1966.12.1.2.80 | ScalarserverRangeStartIPaddress4 | read-write | current | The start IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.81 | ScalarserverRangeEndIPaddress4 | read-write | current | The end IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.82 | ScalarserverSecurityRange5 | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. |
| 1.3.6.1.4.1.1966.12.1.2.83 | ScalarserverRangeStartIPaddress5 | read-write | current | The start IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.84 | ScalarserverRangeEndIPaddress5 | read-write | current | The end IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.85 | ScalarserverSecurityRange6 | read-write | current | If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. |
| 1.3.6.1.4.1.1966.12.1.2.86 | ScalarserverRangeStartIPaddress6 | read-write | current | The start IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.87 | ScalarserverRangeEndIPaddress6 | read-write | current | The end IP address of the range that the server will only respond to, and allow access to and from. |
| 1.3.6.1.4.1.1966.12.1.2.88 | ScalarserverIPaddress3 | read-write | current | The Device Server's eth3 IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank. |
| 1.3.6.1.4.1.1966.12.1.2.89 | ScalarserverSubnetBits3 | read-write | current | The number of bits in the eth3 subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When … |
| 1.3.6.1.4.1.1966.12.1.2.90 | ScalarserverDHCPUpdateDNS3 | read-write | current | If enabled, the DNS server will be updated for the third Ethernet interface after the device server gets the IP address via DHCP. |
| 1.3.6.1.4.1.1966.12.1.2.91 | ScalarserverDomainPrefix3 | read-write | current | The domain prefix for third Ethernet interface of the Device Server. |
| 1.3.6.1.4.1.1966.12.1.2.92 | ScalarserverEth3MTU | read-write | current | Specifies the size of the third Ethernet MTU. |
| 1.3.6.1.4.1.1966.12.1.2.93 | ScalarserverEth1MediaType | read-write | current | For combo ports, specifies the combo port mode. If not supported, this object is not writeable. |
| 1.3.6.1.4.1.1966.12.1.2.94 | ScalarserverEth1Sgmii | read-write | current | For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media Independent Interface) configured. If not supported, this object is not writeable. |
| 1.3.6.1.4.1.1966.12.1.2.95 | ScalarserverEth2MediaType | read-write | current | For combo ports, specifies the combo port mode. If not supported, this object is not writeable. |
| 1.3.6.1.4.1.1966.12.1.2.96 | ScalarserverEth2Sgmii | read-write | current | For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media Independent Interface) configured. If not supported, this object is not writeable. |
| 1.3.6.1.4.1.1966.12.1.3 | NodehostsInfo | |||
| 1.3.6.1.4.1.1966.12.1.3.1 | TablehostsInfoTable | not-accessible | current | The hosts info table. |
| 1.3.6.1.4.1.1966.12.1.3.1.1 | RowhostsInfoEntry | not-accessible | current | An entry in the hostsInfoTable, each relating to a host. |
| 1.3.6.1.4.1.1966.12.1.3.1.1.1 | ColumnhostIndex | not-accessible | current | The table entry number for this host. |
| 1.3.6.1.4.1.1966.12.1.3.1.1.2 | ColumnhostStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.3.1.1.3 | ColumnhostName | read-write | current | The host name used for this host entry. To delete an entry, blank out this field. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.3.1.1.4 | ColumnhostIpAddr | read-write | current | The host IP address used for this entry. |
| 1.3.6.1.4.1.1966.12.1.3.1.1.5 | Columnfqdn | read-write | current | The host full qualified domain name for the host entry. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.4 | NodeuserInfo | |||
| 1.3.6.1.4.1.1966.12.1.4.1 | TableuserTable | not-accessible | current | The user table. |
| 1.3.6.1.4.1.1966.12.1.4.1.1 | RowuserEntry | not-accessible | current | An entry in the userEntry, each relating to a user. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.1 | ColumnuserIndex | not-accessible | current | The table entry number for this user. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.2 | ColumnuserStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.3 | ColumnuserName | read-write | current | The user name. To delete a user, set this field to blank. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.4 | ColumnuserService | read-write | current | The type of service that the user will use: dsprompt, telnet, ssh, rlogin, slip, ppp, tcpclear or sslraw. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.5 | ColumnuserLanguage | read-write | current | Sets the language the user will view all Menu, CLI, and WebManager strings. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.6 | ColumnuserLevel | read-write | current | Admin-Total access to the Device Server. More than one admin user account can exist, but we recommend that you only have one. Normal-Limited access to the Devi… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.7 | ColumnuserHotKeyPrefix | read-write | current | The prefix that a user types to control the current session. The default value is hex 01, which corresponds to Ctrl-a (^a): ^a number-Switches from one session… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.8 | ColumnuserPhoneNumber | read-write | current | The phone number the Device Server will dial to callback the user (you must have set Callback to On). Enter the number without spaces. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.9 | ColumnuserCallBack | read-write | current | When On, enter a phone number for the Device Server to call the user back (the Callback parameter is unrelated to the Line Dial parameter). Note: the Device Se… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.10 | ColumnuserIdleTimer | read-write | current | The amount of time, in seconds, that the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, because … |
| 1.3.6.1.4.1.1966.12.1.4.1.1.11 | ColumnuserSessionTimer | read-write | current | The amount of time, in seconds, that the Session Timer will run. Use this timer to forcibly close a user's session (connection). When the Session Timer expires… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.12 | ColumnuserIpHost | read-write | current | When the User Service is set to Telnet, TCP_clear or SSL_RAW, the target host IP address. If 255.255.255.255 is specified in the configuration, the user will b… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.13 | ColumnuserTelnetPort | read-write | current | The TCP port number for the Telnet session. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.14 | ColumnuserSSHPort | read-write | current | The TCP port number for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.15 | ColumnuserTcpClearPort | read-write | current | The TCP port number for the TCP-Clear or SSL-Raw session. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.16 | ColumnuserFramedIp | read-write | current | Used for User Service PPP or SLIP, sets the IP address of the remote user. Enter the address in dot decimal notation as follows: 255.255.255.254 (default)-The … |
| 1.3.6.1.4.1.1966.12.1.4.1.1.17 | ColumnuserSubnetBits | read-write | current | (IPv4 only) If the remote user is on a subnet, enter the number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.18 | ColumnuserIpv6InterfaceIdentifier | read-write | current | Used for User Service PPP, sets the IP address of the remote user. Enter the address in IPv6 format. The first 64 bits of the Interface Identifier must be zero… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.19 | ColumnuserFramedMtu | read-write | current | Used for User Service PPP or SLIP, specifies the maximum size of packets, in bytes, being transferred across the link. On noisy links it might be preferable to… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.20 | ColumnuserFramedCompression | read-write | current | Used for User Service PPP or SLIP, determines whether Van Jacobsen Compression is used on the link. VJ compression is a means of reducing the standard TCP/IP h… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.21 | ColumnuserRouting | read-write | current | Determines the routing mode used for RIP packets on the PPP and SLIP interfaces. Values are: None-RIP packets are neither received nor sent by the Device Serve… |
| 1.3.6.1.4.1.1966.12.1.4.1.1.22 | ColumnuserPortConnected | read-only | current | Port user is currently connected to. -1 if user not connected |
| 1.3.6.1.4.1.1966.12.1.4.1.1.23 | ColumnuserSessionTime | read-only | current | Current User session time. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.24 | ColumnuserIdleTime | read-only | current | Current Idle time |
| 1.3.6.1.4.1.1966.12.1.4.1.1.27 | ColumnuserAllowAccessClusterPorts | read-write | current | Allow/disallow the user to access to clustering ports. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.28 | ColumnuserHost | read-write | current | The name of the host. |
| 1.3.6.1.4.1.1966.12.1.4.1.1.29 | ColumnuserTunnel | read-write | current | The HTTP tunnel associated with the user's host. |
| 1.3.6.1.4.1.1966.12.1.4.2 | TableportAccessTable | not-accessible | current | The port access info table for user. |
| 1.3.6.1.4.1.1966.12.1.4.2.1 | RowportAccessEntry | not-accessible | current | An entry in the portAccessTable, each relating to a user's access privileges for a serial port. |
| 1.3.6.1.4.1.1966.12.1.4.2.1.1 | ColumnportAccessUserIndex | not-accessible | current | The index for the user entry that port access applies to. |
| 1.3.6.1.4.1.1966.12.1.4.2.1.2 | ColumnportAccessPortIndex | not-accessible | current | The port number that user access applies to. |
| 1.3.6.1.4.1.1966.12.1.4.2.1.3 | ColumnportAccessStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.4.2.1.4 | ColumnportRWAccessAllowed | read-write | current | Enable or disable the user's read write access to the port. |
| 1.3.6.1.4.1.1966.12.1.4.2.1.5 | ColumnportRIAccessAllowed | read-write | current | Enable or disable the user's read input access to the port. |
| 1.3.6.1.4.1.1966.12.1.4.2.1.6 | ColumnportROAccessAllowed | read-write | current | Enable or disable the user's read output access to the port. |
| 1.3.6.1.4.1.1966.12.1.4.3 | TableuserSessionTable | not-accessible | current | user. |
| 1.3.6.1.4.1.1966.12.1.4.3.1 | RowuserSessionEntry | not-accessible | current | An entry in the userEntry, each relating to a user. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.1 | ColumnuserSessionUserIndex | not-accessible | current | The user number. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.2 | ColumnuserSessionNumber | not-accessible | current | The session number. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.3 | ColumnuserSessionStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.4 | ColumnuserSessionType | read-write | current | The type of session for this session number for this user. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.5 | ColumnuserSessionAuto | read-write | current | Specify whether or not the session(s) will start automatically when the user logs into the Device Server. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.6 | ColumnuserSessionTelnetPort | read-write | current | For Telnet sessions, the TCP port number the target host is listening on for incoming connections. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.7 | ColumnuserSessionTelnetHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.8 | ColumnuserSessionTelnetTermType | read-write | current | Type of terminal attached to this line; for example, ANSI or WYSE60. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.9 | ColumnuserSessionTelnetEcho | read-write | current | Toggles between local echo of entered characters and suppressing local echo. Local echo is used for normal processing, while suppressing the echo is convenient… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.10 | ColumnuserSessionTelnetMapnl | read-write | current | Maps carriage returns (CR) to carriage return line feed (CRLF). Default is Off. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.11 | ColumnuserSessionTelnetMode | read-write | current | When On, keyboard input is not sent to the remote host until Enter is pressed, otherwise input is sent every time a key is pressed. Default is Off. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.12 | ColumnuserSessionTelnetInterrupt | read-write | current | Defines the interrupt character. Typing the interrupt character interrupts the current process. This value is in hexadecimal with a default value of 3 (ASCII v… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.13 | ColumnuserSessionTelnetQuit | read-write | current | Defines the quit character. Typing the quit character closes and exits the current Telnet session. This value is in hexadecimal with a default value of 1c (ASC… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.14 | ColumnuserSessionTelnetEOF | read-write | current | Defines the end-of-file character. When Line Mode is On, entering the eof character as the first character on a line sends the character to the remote host. Th… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.15 | ColumnuserSessionTelnetErase | read-write | current | Defines the erase character. When Line Mode is Off, typing the erase character erases one character. This value is in hexadecimal with a default value of 8 (AS… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.16 | ColumnuserSessionTelnetEchoCC | read-write | current | Defines the echo character. When Line Mode is On, typing the echo character echoes the text locally and sends only completed lines to the host. This value is i… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.17 | ColumnuserSessionTelnetBreak | read-write | current | Defines the escape character. Returns you to the command line mode. This value is in hexadecimal with a default value of 1d (ASCII value GS). |
| 1.3.6.1.4.1.1966.12.1.4.3.1.18 | ColumnuserSessionSSHPort | read-write | current | The target host TCP port number. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.19 | ColumnuserSessionSSHHost | read-write | current | The host that the user will automatically connect to via SSH after a successful login. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.20 | ColumnuserSessionSSHTermType | read-write | current | The type of terminal that will connecting via SSH. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.21 | ColumnuserSessionSSHVerbose | read-write | current | Displays debug messages on the terminal. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.22 | ColumnuserSessionSSHCompression | read-write | current | Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.23 | ColumnuserSessionSSHAutoLogin | read-write | current | Creates an automatic SSH login, using the Name and Password values. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.24 | ColumnuserSessionSSHName | read-write | current | The name of the user logging into the SSH session. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.25 | ColumnuserSessionSSHProtocol | read-write | current | Specify the SSH client version that will be used for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.26 | ColumnuserSessionSSHRSA | read-write | current | An authentication method used by SSH version 1 and 2. Use RSA authentication for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.27 | ColumnuserSessionSSHDSA | read-write | current | An authentication method used by SSH version 2. Use DSA authentication for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.28 | ColumnuserSessionSSHKeyboard | read-write | current | The user types in a password for authentication. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.29 | ColumnuserSessionSSHCipherSSH1 | read-write | current | Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish |
| 1.3.6.1.4.1.1966.12.1.4.3.1.30 | ColumnuserSessionSSHFirstSSH2Cipher | read-write | current | Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.31 | ColumnuserSessionSSHSecondSSH2Cipher | read-write | current | Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.32 | ColumnuserSessionSSHThirdSSH2Cipher | read-write | current | Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.33 | ColumnuserSessionSSHFourthSSH2Cipher | read-write | current | Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.34 | ColumnuserSessionSSHFifthSSH2Cipher | read-write | current | Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.35 | ColumnuserSessionRloginHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.36 | ColumnuserSessionRloginTermType | read-write | current | Type of terminal attached to this line; for example, ansi or wyse60. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.37 | ColumnuserSessionTelnetTunnelName | read-write | current | The name of the HTTP tunnel associated with the Telnet service. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.38 | ColumnuserSessionSSHTunnelName | read-write | current | The name of the HTTP tunnel associated with the SSH service. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.39 | ColumnuserSessionRloginTunnelName | read-write | current | The name of the HTTP tunnel associated with the Rlogin service. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.40 | ColumnuserSessionStrictHostKeyChecking | read-write | current | When set, the device server must have a host key loaded. |
| 1.3.6.1.4.1.1966.12.1.4.3.1.41 | ColumnuserSessionSSHSixthSSH2Cipher | read-write | current | Select the sixth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.42 | ColumnuserSessionSSHSeventhSSH2Cipher | read-write | current | Select the seventh priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowf… |
| 1.3.6.1.4.1.1966.12.1.4.3.1.43 | ColumnuserSessionSSHEighthSSH2Cipher | read-write | current | Select the eighth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.5 | NodeportInfo | |||
| 1.3.6.1.4.1.1966.12.1.5.1 | TableportTable | not-accessible | current | The port configuration table. |
| 1.3.6.1.4.1.1966.12.1.5.1.1 | RowportEntry | not-accessible | current | An entry in the port configuration table, each relating to a serial port. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.1 | ColumnportIndex | not-accessible | current | Serial Port Index. Valid values are 1 to maximum port number the Device Server supports |
| 1.3.6.1.4.1.1966.12.1.5.1.1.2 | ColumnportStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.3 | ColumnportName | read-write | current | Provide a name for the line so it can be easily identified. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.4 | ColumnportService | read-write | current | Defines the Line Service, which determines how the line will be used. USB ports can only be configured to reverseraw(4),reversessh(11),,reversetelnet(8), bidir… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.5 | ColumnportDial | read-write | current | Determines how a modem will work on the line. If your user is remote and will be dialing in via modem or ISDN TA, set this parameter to In; if the Device Serve… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.6 | ColumnportModem | read-write | current | The name of the predefined modem that is used on this line. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.7 | ColumnportPhone | read-write | current | The phone number to use when Dial is set to Out. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.8 | ColumnportTermType | read-write | current | Specifies the type of terminal connected to the line: Dumb, WYSE60, VT100, ANSI, TVI925, IBM3151TE, VT320 (specifically supporting VT320-7), HP700 (specificall… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.9 | ColumnportPages | read-write | current | For DSLogin line service, this is the number of video pages the terminal supports. Valid values are 1-7. The default is 5 pages. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.10 | ColumnportPreDefinedUser | read-write | current | For DSLogin line service, makes this a line that is dedicated to the specified user. Only this user will be able to log in on this line and they won't need to … |
| 1.3.6.1.4.1.1966.12.1.5.1.1.11 | ColumnportDSPort | read-write | current | The Device Server port number. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.12 | ColumnportIdleTimer | read-write | current | Enter a time period, in seconds, for which the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, th… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.13 | ColumnportSessionTimer | read-write | current | Enter a time, in seconds, for which the Session Timer will run. Use this timer to forcibly close the session (connection). When the Session Timer expires, the … |
| 1.3.6.1.4.1.1966.12.1.5.1.1.14 | ColumnportSecurity | read-write | current | Enables/disables login/password authentication, locally or externally, on reverse Telnet connections. The default is Off. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.15 | ColumnportBreak | read-write | current | Specifies how a break is interpreted: None-The Device Server ignores the break key completely and it is not passed through to the host. This is the default set… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.16 | ColumnportInboundFlowControl | read-write | current | Determines if input flow control is to be used. Default is On. This is active only when Line Flow Control is set to Soft, Hard, or Both. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.17 | ColumnportOutboundFlowControl | read-write | current | Determines if output flow control is to be used. Default is On. This is active only when Line Flow Control is set to Soft, Hard, or Both. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.18 | ColumnportInitialMode | read-write | current | Specifies the initial interface a user navigates when logging into the line; either the Menu or a prompt for the CLI. The default is CLI. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.19 | ColumnportReset | read-write | current | Resets the terminal type connected to the line when a user logs out. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.20 | ColumnportKeepalive | read-write | current | Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.21 | ColumnportMapCR | read-write | current | Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is Off. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.22 | ColumnportMOTD | read-write | current | Enables/disables the message of the day on the line. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.23 | ColumnportHotKeyPrefix | read-write | current | The prefix that a user types to lock a line or redraw the Menu. The default value is hex 01, which corresponds to Ctrl-a (^a) (hex value 02 would be Ctrl-b (^b… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.24 | ColumnportLock | read-write | current | When enabled, the user can lock his terminal with a password using the Hotkey Prefix (default Ctrl-a) ^a l (lowercase L). The Device Server prompts the user fo… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.25 | ColumnportEnable | read-write | current | Is the Port Enabled. This field is not available on 1-port units. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.26 | ColumnportMultiSession | read-write | current | The number of Multisessions allowed on this port |
| 1.3.6.1.4.1.1966.12.1.5.1.1.27 | ColumnportDialRetries | read-write | current | The number of Dial Retries. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.28 | ColumnportDialTimeout | read-write | current | The timeout value when dialing in seconds. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.29 | ColumnportInternetAddress | read-write | current | The Internet address of this port. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.30 | ColumnportRawOption | read-write | current | Defines the multihost Service and direct connection initiate mode |
| 1.3.6.1.4.1.1966.12.1.5.1.1.31 | ColumnportDirectTrigger | read-write | current | Defines the direct connection initiate char |
| 1.3.6.1.4.1.1966.12.1.5.1.1.32 | ColumnportDataLogging | read-write | current | When on, serial data will be buffered if the TCP connection is lost. When the TCP connection is re-established, the buffered serial data will be sent to its de… |
| 1.3.6.1.4.1.1966.12.1.5.1.1.33 | ColumnportSacSupport | read-write | current | When on, a user can access SAC (the interface of the Microsoft Emergency Management Systems utility) through EasyPort Web when the device server's serial port … |
| 1.3.6.1.4.1.1966.12.1.5.1.1.34 | ColumnportSendName | read-write | current | Send the port name on connect. Applies to direct raw, silent raw, and TruePort (server-initiated) srevice types. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.35 | ColumnportConnectInitiateString | read-write | current | String to be sent when connection is initiated. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.36 | ColumnportConnectTerminateString | read-write | current | String to be sent when connection is terminated. |
| 1.3.6.1.4.1.1966.12.1.5.1.1.37 | ColumnportConnectStringDelay | read-write | current | The delay after sending the connect or terminate string, in milliseconds |
| 1.3.6.1.4.1.1966.12.1.5.1.1.38 | ColumnportBreakLength | read-write | current | Amount of time, in milliseconds, to send a break signal (tunnel service only) |
| 1.3.6.1.4.1.1966.12.1.5.1.1.39 | ColumnportBreakDelay | read-write | current | The delay, in milliseconds, after sending a break signal (tunnel service only) |
| 1.3.6.1.4.1.1966.12.1.5.2 | TableportHdwTable | not-accessible | current | Port. |
| 1.3.6.1.4.1.1966.12.1.5.2.1 | RowportHdwEntry | not-accessible | current | An entry in the portHdwEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.1 | ColumnportHdwIndex | not-accessible | current | Port hardware Index |
| 1.3.6.1.4.1.1966.12.1.5.2.1.2 | ColumnportHdwStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.2.1.3 | ColumnportHdwInterface | read-write | current | Specifies the type of line that is being used with the Device Server. Select either EIA-232, EIA-422, or EIA-485. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.4 | ColumnportHdwSpeed | read-write | current | Specifies the baud rate of the line; keep in mind that speed is affected by the length of the cable. When bCustom is set, then the baud rate is specified by po… |
| 1.3.6.1.4.1.1966.12.1.5.2.1.5 | ColumnportHdwDataBits | read-write | current | Specifies the number of bits in a byte. The default is 8. Internal modems only support 7 and 8 data bits. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.6 | ColumnportHdwParity | read-write | current | Specifies if you are using Even, Odd, or No parity on the line. If you want to force a parity type, you can specify Mark for 1 or Space for 0. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.7 | ColumnportHdwStopBits | read-write | current | Specifies the number of stop bits that follow a byte. Certain models do not support 1.5 stop bits. Internal modems only support 1 stop bit. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.8 | ColumnportHdwFlowControl | read-write | current | Defines whether the data flow is handled by the software (Soft), hardware (Hard), Both, or None. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.9 | ColumnportHdwMonitorDSR | read-write | current | Specifies whether the RS-232 signal DSR (Data Set Ready) should be monitored, for Device Servers with a DTE serial interface. On a Device Server with a DCE ser… |
| 1.3.6.1.4.1.1966.12.1.5.2.1.10 | ColumnportHdwMonitorDCD | read-write | current | Specifies whether the RS-232 signal DCD (Data Carrier Detect) should be monitored. This object does not apply to DCE serial interfaces. This is used with modem… |
| 1.3.6.1.4.1.1966.12.1.5.2.1.11 | ColumnportHdwDuplex | read-write | current | Specify whether the line is Full Duplex (communication both ways at the same time) or Half Duplex (communication in one direction at a time). |
| 1.3.6.1.4.1.1966.12.1.5.2.1.12 | ColumnportHdwTXDriverControl | read-write | current | Used with a EIA-485 serial interface, if your application supports RTS (Request To Send), select this option. Otherwise, select Auto. Default is Auto |
| 1.3.6.1.4.1.1966.12.1.5.2.1.13 | ColumnportHdwEchoSuppression | read-write | current | This parameter applies only to EIA-485 Half Duplex mode. All characters will be echoed to the user and transmitted across the serial ports. Some EIA-485 applic… |
| 1.3.6.1.4.1.1966.12.1.5.2.1.14 | ColumnportHdwUART | read-only | current | portHdwUART |
| 1.3.6.1.4.1.1966.12.1.5.2.1.15 | ColumnportHdwIRQ | read-only | current | Port Hardware IRQ |
| 1.3.6.1.4.1.1966.12.1.5.2.1.16 | ColumnportHdwTxBytes | read-only | current | portHdwTxBytes |
| 1.3.6.1.4.1.1966.12.1.5.2.1.17 | ColumnportHdwRxBytes | read-only | current | portHdwRxBytes |
| 1.3.6.1.4.1.1966.12.1.5.2.1.18 | ColumnportHdwFrameErrs | read-only | current | portHdwFrameErrs |
| 1.3.6.1.4.1.1966.12.1.5.2.1.19 | ColumnportHdwParityErrs | read-only | current | portHdwParityErrs |
| 1.3.6.1.4.1.1966.12.1.5.2.1.20 | ColumnportHdwBreaks | read-only | current | portHdwBreaks |
| 1.3.6.1.4.1.1966.12.1.5.2.1.21 | ColumnportHdwOverruns | read-only | current | portHdwOverruns |
| 1.3.6.1.4.1.1966.12.1.5.2.1.22 | ColumnportHdwRTS | read-only | current | portHdwRTS |
| 1.3.6.1.4.1.1966.12.1.5.2.1.23 | ColumnportHdwCTS | read-only | current | portHdwCTS |
| 1.3.6.1.4.1.1966.12.1.5.2.1.24 | ColumnportHdwDTR | read-only | current | portHdwDTR |
| 1.3.6.1.4.1.1966.12.1.5.2.1.25 | ColumnportHdwDSR | read-only | current | portHdwDSR |
| 1.3.6.1.4.1.1966.12.1.5.2.1.26 | ColumnportHdwCD | read-only | current | portHdwCD |
| 1.3.6.1.4.1.1966.12.1.5.2.1.27 | ColumnportHdwRI | read-only | current | portHdwRI |
| 1.3.6.1.4.1.1966.12.1.5.2.1.29 | ColumnportSoftTermination | read-write | current | Enables or disables software line termination. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.30 | ColumnportHdwCustomSpeed | read-write | current | The custom baud rate for this port. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.31 | ColumnportHdwDiscardCharactersRecievedWithErrors | read-write | current | This option if set will discard any characters recieved on the uart that have overrun, framing or parity errors. If not set, then the characters are sent out t… |
| 1.3.6.1.4.1.1966.12.1.5.2.1.32 | ColumnportHdwRtsToggle | read-write | current | This option if set will toggle RTS on before transmitting the first character and toggle RTS off after transmitting the last character. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.33 | ColumnportHdwRtsInitialDelay | read-write | current | The delay, in msec, between turning RTS on and transmittng the first character. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.34 | ColumnportHdwRtsFinalDelay | read-write | current | The delay, in msec, between transmitting the last character and turning RTS off. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.35 | ColumnportHdwDataEquipment | read-write | current | This option if set will toggle between Data Terminal Equipment (DTE) Rolled and Data Communication Equipment (DCE) Straight. |
| 1.3.6.1.4.1.1966.12.1.5.2.1.36 | ColumnportHdwSlot | read-only | current | Slot hardware available. portHdwSlot.1 (ports 1 - 16) portHdwSlot.2 (ports 17- 32) portHdwSlot.3 (ports 33- 48) |
| 1.3.6.1.4.1.1966.12.1.5.3 | TableportTelnetTable | not-accessible | current | Port Telnet Table. |
| 1.3.6.1.4.1.1966.12.1.5.3.1 | RowportTelnetEntry | not-accessible | current | An entry in the portTelnetEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.3.1.1 | ColumnportTelnetIndex | not-accessible | current | portTelnetIndex |
| 1.3.6.1.4.1.1966.12.1.5.3.1.2 | ColumnportTelnetStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.3 | ColumnportTelnetPort | read-write | current | The port number the target host is listening on for incoming connections. Default is 23. |
| 1.3.6.1.4.1.1966.12.1.5.3.1.4 | ColumnportTelnetHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.3.1.5 | ColumnportTelnetTermType | read-write | current | Type of terminal attached to this line; for example, ANSI or WYSE60. |
| 1.3.6.1.4.1.1966.12.1.5.3.1.6 | ColumnportTelnetEcho | read-write | current | Toggles between local echo of entered characters and suppressing local echo. Local echo is used for normal processing, while suppressing the echo is convenient… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.7 | ColumnportTelnetMapnl | read-write | current | Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is Off. |
| 1.3.6.1.4.1.1966.12.1.5.3.1.8 | ColumnportTelnetMode | read-write | current | When On, keyboard input is not sent to the remote host until Enter is pressed, otherwise input is sent every time a key is pressed. Default is Off. |
| 1.3.6.1.4.1.1966.12.1.5.3.1.9 | ColumnportTelnetInterrupt | read-write | current | Defines the interrupt character. Typing the interrupt character interrupts the current process. This value is in hexadecimal with a default value of 3 (ASCII v… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.10 | ColumnportTelnetQuit | read-write | current | Defines the quit character. Typing the quit character closes and exits the current telnet session. This value is in hexadecimal with a default value of 1c (ASC… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.11 | ColumnportTelnetEOF | read-write | current | Defines the end-of-file character. When Line Mode is On, entering the eof character as the first character on a line sends the character to the remote host. Th… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.12 | ColumnportTelnetErase | read-write | current | Defines the erase character. When Line Mode is Off, typing the erase character erases one character. This value is in hexadecimal with a default value of 8 (AS… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.13 | ColumnportTelnetEchoCC | read-write | current | Defines the echo character. When Line Mode is On, typing the echo character echoes the text locally and sends only completed lines to the host. This value is i… |
| 1.3.6.1.4.1.1966.12.1.5.3.1.14 | ColumnportTelnetBreak | read-write | current | Defines the escape character. Returns you to the command line mode. This value is in hexadecimal with a default value of 1d (ASCII value GS). |
| 1.3.6.1.4.1.1966.12.1.5.3.1.15 | ColumnportTelnetTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.4 | TableportSSHTable | not-accessible | current | Port SSH Table. |
| 1.3.6.1.4.1.1966.12.1.5.4.1 | RowportSSHEntry | not-accessible | current | An entry in the portSSHEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.1 | ColumnportSSHIndex | not-accessible | current | portSSHIndex |
| 1.3.6.1.4.1.1966.12.1.5.4.1.2 | ColumnportSSHStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.3 | ColumnportSSHPort | read-write | current | The port number the target host is listening on for incoming connections. The default is port 22. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.4 | ColumnportSSHHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.5 | ColumnportSSHTermType | read-write | current | The type of terminal that will connecting via SSH. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.6 | ColumnportSSHVerbose | read-write | current | Displays debug messages on the terminal. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.7 | ColumnportSSHCompression | read-write | current | Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks |
| 1.3.6.1.4.1.1966.12.1.5.4.1.8 | ColumnportSSHAutoLogin | read-write | current | Creates an automatic SSH login, using the Name and Password values. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.9 | ColumnportSSHName | read-write | current | The name of the user logging into the SSH session. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.10 | ColumnportSSHProtocol | read-write | current | Specify the SSH client version that will be used for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.11 | ColumnportSSHRSA | read-write | current | An authentication method used by SSH version 1 and 2. Use RSA authentication for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.12 | ColumnportSSHDSA | read-write | current | An authentication method used by SSH version 2. Use DSA authentication for the SSH session. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.13 | ColumnportSSHKeyboard | read-write | current | The user types in a password for authentication. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.14 | ColumnportSSHCipherSSH1 | read-write | current | Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish |
| 1.3.6.1.4.1.1966.12.1.5.4.1.15 | ColumnportSSHFirstSSH2Cipher | read-write | current | Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.16 | ColumnportSSHSecondSSH2Cipher | read-write | current | Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.17 | ColumnportSSHThirdSSH2Cipher | read-write | current | Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.18 | ColumnportSSHFourthSSH2Cipher | read-write | current | Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.19 | ColumnportSSHFifthSSH2Cipher | read-write | current | Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.20 | ColumnportSSHTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.21 | ColumnportSSHStrictHostKeyChecking | read-write | current | When set, the device server must have a host key loaded. |
| 1.3.6.1.4.1.1966.12.1.5.4.1.22 | ColumnportSSHSixthSSH2Cipher | read-write | current | Select the sixth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.23 | ColumnportSSHSeventhSSH2Cipher | read-write | current | Select the seventh priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowf… |
| 1.3.6.1.4.1.1966.12.1.5.4.1.24 | ColumnportSSHEighthSSH2Cipher | read-write | current | Select the eighth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.5.5 | TableportPPPTable | not-accessible | current | Port PPP Table. |
| 1.3.6.1.4.1.1966.12.1.5.5.1 | RowportPPPEntry | not-accessible | current | An entry in the portPPPEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.1 | ColumnportPPPIndex | not-accessible | current | portPPPIndex |
| 1.3.6.1.4.1.1966.12.1.5.5.1.2 | ColumnportPPPStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.3 | ColumnportPPPLocalIpAddr | read-write | current | The IPv4 IP address of the Device Server end of the PPP link. For routing to work, you must enter a local IP address. Choose an address that is part of the sam… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.4 | ColumnportPPPRemoteIpAddr | read-write | current | The IPv4 IP address of the remote end of the PPP link. Choose an address that is part of the same network or subnetwork as the Device Server. If you set the PP… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.5 | ColumnportPPPSubnetBits | read-write | current | The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. If your user is authenticated by RADIUS and the RAD… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.6 | ColumnportPPPIpV6LocalIpAddr | read-write | current | The local IPv6 interface identifier of the Device Server end of the PPP link. For routing to work, you must enter a local IP address. Choose an address that is… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.7 | ColumnportPPPIpV6RemoteIpAddr | read-write | current | The remote IPv6 interface identifier of the remote end of the PPP link. Choose an address that is part of the same network or subnetwork as the Device Server. … |
| 1.3.6.1.4.1.1966.12.1.5.5.1.8 | ColumnportPPPAccm | read-write | current | Specifies the ACCM (Asynchronous Control Character Map) characters that should be escaped from the data stream. This is entered as a 32-bit hexadecimal number … |
| 1.3.6.1.4.1.1966.12.1.5.5.1.9 | ColumnportPPPMru | read-write | current | The Maximum Receive Unit (MRU) parameter specifies the maximum size of PPP packets that the Device Server's port will accept. Enter a value between 64 and 1500… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.10 | ColumnportPPPSecurity | read-write | current | The type of authentication that will be done on the link: None, PAP, or CHAP. The default is CHAP. You can use PAP or CHAP to authenticate a port or user on th… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.11 | ColumnportPPPUser | read-write | current | Complete this field only if you have specified PAP or CHAP (security protocols) in the Security field, and you wish to dedicate this line to a single remote us… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.12 | ColumnportPPPRemoteUser | read-write | current | Complete this field only if you have specified PAP or CHAP (security protocols) in the Security field, and you wish to dedicate this line to a single remote us… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.13 | ColumnportPPPACComp | read-write | current | This determines whether compression of the PPP Address and Control fields take place on the link. The default is On. For most applications this should be enabl… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.14 | ColumnportPPPProtoComp | read-write | current | This determines whether compression of the PPP Protocol field takes place on this link. The default is On. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.15 | ColumnportPPPVJComp | read-write | current | This determines whether Van Jacobson Compression is used on this link. The default is On. If your user is authenticated by the Device Server, this VJ compressi… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.16 | ColumnportPPPMagicNegotiation | read-write | current | Determines if a line is looping back. If enabled (On), random numbers are sent on the link. The random numbers should be different, unless the link loops back.… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.17 | ColumnportPPPIPAddrNegotiation | read-write | current | Specifies whether or not IP address negotiation will take place. IP address negotiation is where the Device Server allows the remote end to specify its IP addr… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.18 | ColumnportPPPCRTimeout | read-write | current | The maximum time, in seconds, that LCP (Link Control Protocol) will wait before it considers a configure request packet to have been lost. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.19 | ColumnportPPPTRTimeout | read-write | current | The maximum time, in seconds, that LCP (Link Control Protocol) will wait before it considers a terminate request packet to have been lost. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.20 | ColumnportPPPCRRetry | read-write | current | The maximum number of times a configure request packet will be sent before the link is terminated. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.21 | ColumnportPPPTRRetry | read-write | current | The maximum number of times a terminate request packet will be sent before the link is terminated. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.22 | ColumnportPPPNakRetry | read-write | current | The maximum number of times a configure NAK packet will be sent before the link is terminated. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.23 | ColumnportPPPAuthTimeout | read-write | current | The timeout, in seconds, during which successful PAP or CHAP authentication must take place (when PAP or CHAP is turned On). If the timer expires before the re… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.24 | ColumnportPPPRoamingCallback | read-write | current | A user can enter a telephone number that the Device Server will use to callback him/her. This feature is particularly useful for a mobile user. Roaming callbac… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.25 | ColumnportPPPChallengInterval | read-write | current | The interval, in seconds, for which the Device Server will issue a CHAP re-challenge to the remote end. During CHAP authentication, an initial CHAP challenge t… |
| 1.3.6.1.4.1.1966.12.1.5.5.1.26 | ColumnportPPPRouting | read-write | current | Determines the routing mode (RIP, Routing Information Protocol) used on the PPP interface as one of the following options: None-Disables RIP over the PPP/SLIP … |
| 1.3.6.1.4.1.1966.12.1.5.5.1.27 | ColumnportPPPDynamicDNSEnabled | read-write | current | Enable/disable dynamic DNS. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.28 | ColumnportPPPDynamicDNSHostname | read-write | current | Host name. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.29 | ColumnportPPPDynamicDNSUserName | read-write | current | user name. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.30 | ColumnportPPPDynamicDNSPassword | read-write | current | Password. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.31 | ColumnportPPPDynamicDNSStatusString | read-write | current | Dynamic DNS Status |
| 1.3.6.1.4.1.1966.12.1.5.5.1.32 | ColumnportPPPMSDirectConnection | read-write | current | Set for Microsoft PPP connection working mode |
| 1.3.6.1.4.1.1966.12.1.5.5.1.33 | ColumnportPPPIPv6Prefix | read-write | current | You can optionally specify an IPv6 global network prefix that the Device Server will advertise to the device at the other end of the PPP link. Default: 0:0:0:0 |
| 1.3.6.1.4.1.1966.12.1.5.5.1.34 | ColumnportPPPIPv6PrefixBits | read-write | current | Specify the prefix bits for the IPv6 global network prefix. Default is 64. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.35 | ColumnportPPPEchoTimeout | read-write | current | The timeout, in seconds, to wait for an Echo reply. |
| 1.3.6.1.4.1.1966.12.1.5.5.1.36 | ColumnportPPPEchoRetry | read-write | current | The maximum number of Echo reply timeouts before the link is terminated. |
| 1.3.6.1.4.1.1966.12.1.5.6 | TableportSLIPTable | not-accessible | current | Port SLIP Table. |
| 1.3.6.1.4.1.1966.12.1.5.6.1 | RowportSLIPEntry | not-accessible | current | An entry in the portSLIPEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.6.1.1 | ColumnportSLIPIndex | not-accessible | current | portSLIPIndex |
| 1.3.6.1.4.1.1966.12.1.5.6.1.2 | ColumnportSlipStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.6.1.3 | ColumnportSLIPLocalIpAddress | read-write | current | The IPv4 address of the Device Server end of the SLIP link. For routing to work you must enter an IP address in this field. Choose an address that is part of t… |
| 1.3.6.1.4.1.1966.12.1.5.6.1.4 | ColumnportSLIPRemoteIpAddress | read-write | current | The IPv4 address of the remote end of the SLIP link. Choose an address that is part of the same network or subnetwork as the Device Server. If your user is aut… |
| 1.3.6.1.4.1.1966.12.1.5.6.1.5 | ColumnportSLIPSubnetBits | read-write | current | The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. If your user is authenticated by RADIUS and the RAD… |
| 1.3.6.1.4.1.1966.12.1.5.6.1.6 | ColumnportSLIPMtu | read-write | current | The Maximum Transmission Unit (MTU) parameter restricts the size of individual SLIP packets being sent by the Device Server. Enter a value between 256 and 1006… |
| 1.3.6.1.4.1.1966.12.1.5.6.1.7 | ColumnportSLIPVJComp | read-write | current | This determines whether Van Jacobson compression is used on this link; that is, whether you are using SLIP or C-SLIP (compressed SLIP). The choices are On (C-S… |
| 1.3.6.1.4.1.1966.12.1.5.6.1.8 | ColumnportSLIPRouting | read-write | current | Determines the routing mode (RIP, Routing Information Protocol) used on the SLIP interface as one of the following options: None-Disables RIP over the PPP/SLIP… |
| 1.3.6.1.4.1.1966.12.1.5.7 | TableportUDPTable | not-accessible | current | Port UDP Table. |
| 1.3.6.1.4.1.1966.12.1.5.7.1 | RowportUDPEntry | not-accessible | current | An entry in the portUDPEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.7.1.1 | ColumnportUDPIndex | not-accessible | current | portUDPIndex |
| 1.3.6.1.4.1.1966.12.1.5.7.1.2 | ColumnportUDPEntryIndex | not-accessible | current | portUDPNumber |
| 1.3.6.1.4.1.1966.12.1.5.7.1.3 | ColumnportUDPStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.7.1.4 | ColumnportUDPStartAddress | read-write | current | The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the Device Server will listen for messages from and/or send messages to |
| 1.3.6.1.4.1.1966.12.1.5.7.1.5 | ColumnportUDPEndAddress | read-write | current | The last host IP address in the range of IP addresses (for IPv4, not required for IPv6) that the Device Server will listen for messages from and/or send messag… |
| 1.3.6.1.4.1.1966.12.1.5.7.1.6 | ColumnportUDPPort | read-write | current | The port that the Device Server will use to receive messages from or relay messages to servers/hosts. |
| 1.3.6.1.4.1.1966.12.1.5.7.1.7 | ColumnportUDPDirection | read-write | current | The direction in which information is received or relayed: None-UDP service not enabled. In-LAN to serial. Out-Serial to LAN. Both-Messages are relayed both di… |
| 1.3.6.1.4.1.1966.12.1.5.7.1.8 | ColumnportUDPOption | read-write | current | when want UDP port be any port which only valid for lan to serial direction set this to 2, others for auto lean UDP port and specific port set this to 1 |
| 1.3.6.1.4.1.1966.12.1.5.7.1.9 | ColumnportUDPTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.8 | TableportVmodemTable | not-accessible | current | Port Vmodem Table. |
| 1.3.6.1.4.1.1966.12.1.5.8.1 | RowportVmodemEntry | not-accessible | current | An entry in the portVmodemEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.1 | ColumnportVmodemIndex | not-accessible | current | portVmodemIndex |
| 1.3.6.1.4.1.1966.12.1.5.8.1.2 | ColumnportVmodemStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.8.1.3 | ColumnportVmodemHost | read-write | current | The target host name. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.4 | ColumnportVmodemPort | read-write | current | The port number the target host is listening on for messages. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.5 | ColumnportVmodemSuccessString | read-write | current | String that is sent to the serial device when a connection succeeds. If no string is entered, then the string CONNECT will be sent with the connecting speed, f… |
| 1.3.6.1.4.1.1966.12.1.5.8.1.6 | ColumnportVmodemFailureString | read-write | current | String that is sent to the serial device when a connection fails. If no string is entered, then the string NO CARRIER will be sent. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.7 | ColumnportVmodemSuppress | read-write | current | If set to No, connection success/failure indication strings are sent to the connected device, otherwise these indications are suppressed. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.8 | ColumnportVmodemStyle | read-write | current | One of the following: Verbose-Return codes (strings) are sent to the connected device. Numeric-The following characters can be sent to the connected device: 1 … |
| 1.3.6.1.4.1.1966.12.1.5.8.1.9 | ColumnportVmodemResponseDelay | read-write | current | The vmodem delay to response, in milliseconds, default is 250. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.10 | ColumnportVmodemEcho | read-write | current | If set to on, vmodem will echo input. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.11 | ColumnportVmodemMode | read-write | current | In auto mode vmodem will automatically use the host and port make connection, otherwise will wait for use input |
| 1.3.6.1.4.1.1966.12.1.5.8.1.12 | ColumnportVmodemDCD | read-write | current | Define the behavior of DCD |
| 1.3.6.1.4.1.1966.12.1.5.8.1.13 | ColumnportVmodemRTS | read-write | current | Define the behavior of signal RTS |
| 1.3.6.1.4.1.1966.12.1.5.8.1.14 | ColumnportVmodemDTR | read-write | current | Define the behavior of signal DTR |
| 1.3.6.1.4.1.1966.12.1.5.8.1.15 | ColumnportVmodemInitString | read-write | current | String that used as initial AT commands. |
| 1.3.6.1.4.1.1966.12.1.5.8.1.16 | ColumnportVmodemTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.9 | TableportRawTable | not-accessible | current | Port Raw Table. |
| 1.3.6.1.4.1.1966.12.1.5.9.1 | RowportRawEntry | not-accessible | current | An entry in the portRawEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.9.1.1 | ColumnportRawIndex | not-accessible | current | Index of the corresponding serial port. |
| 1.3.6.1.4.1.1966.12.1.5.9.1.2 | ColumnportRawStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.9.1.3 | ColumnportRawPort | read-write | current | The port number the target host is listening on for incoming connections. |
| 1.3.6.1.4.1.1966.12.1.5.9.1.4 | ColumnportRawHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.9.1.5 | ColumnportRawTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.10 | TableportBidirTable | not-accessible | current | Port Bidir Table. |
| 1.3.6.1.4.1.1966.12.1.5.10.1 | RowportBidirEntry | not-accessible | current | An entry in the portBidirEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.10.1.1 | ColumnportBidirIndex | not-accessible | current | portBidirIndex |
| 1.3.6.1.4.1.1966.12.1.5.10.1.2 | ColumnportBidirStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.10.1.3 | ColumnportBidirPort | read-write | current | The port number the target host is listening on for incoming connections. |
| 1.3.6.1.4.1.1966.12.1.5.10.1.4 | ColumnportBidirHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.10.1.5 | ColumnportBidirTunnelName | read-write | current | The name of the HTTP tunnel associated with this service's target host. |
| 1.3.6.1.4.1.1966.12.1.5.11 | TableportRloginTable | not-accessible | current | Port Rlogin Table. |
| 1.3.6.1.4.1.1966.12.1.5.11.1 | RowportRloginEntry | not-accessible | current | An entry in the portRloginEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.11.1.1 | ColumnportRloginIndex | not-accessible | current | Index of the corresponding serial port. |
| 1.3.6.1.4.1.1966.12.1.5.11.1.2 | ColumnportRloginStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.11.1.3 | ColumnportRloginHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.11.1.4 | ColumnportRloginTermType | read-write | current | Type of terminal attached to this line; for example, ANSI or WYSE60. |
| 1.3.6.1.4.1.1966.12.1.5.11.1.5 | ColumnportRloginTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.12 | TableportEmailTable | not-accessible | current | Port Email Table. |
| 1.3.6.1.4.1.1966.12.1.5.12.1 | RowportEmailEntry | not-accessible | current | An entry in the portEmailEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.1 | ColumnportEmailIndex | not-accessible | current | Index of the corresponding serial port. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.2 | ColumnportEmailStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.12.1.3 | ColumnportEmailActive | read-write | current | Determines whether or not email notification is turned on. Default is Off. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.5 | ColumnportEmailLevel | read-write | current | Choose the event level that triggers an email notification: Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug. You are selecting the lowest no… |
| 1.3.6.1.4.1.1966.12.1.5.12.1.6 | ColumnportEmailTo | read-write | current | An email address or list of email addresses that will receive the email notification. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.7 | ColumnportEmailFrom | read-write | current | This field can contain an email address that might identify the Device Server name or some other value. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.9 | ColumnportEmailReply | read-write | current | The email address to whom all replies to the email notification should go. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.10 | ColumnportEmailSubject | read-write | current | A text string, which can contain spaces, that will display in the Subject field of the email notification. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.11 | ColumnportEmailUseDefaultLevel | read-write | current | Inherit 'level' setting from the Server Email Alert. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.12 | ColumnportEmailUseDefaultTo | read-write | current | Inherit 'to' setting from the Server Email Alert. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.13 | ColumnportEmailUseDefaultFrom | read-write | current | Inherit 'from' setting from the Server Email Alert. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.14 | ColumnportEmailUseDefaultReply | read-write | current | Inherit 'reply' setting from the Server Email Alert. |
| 1.3.6.1.4.1.1966.12.1.5.12.1.15 | ColumnportEmailUseDefaultSubject | read-write | current | Inherit 'subject' setting from the Server Email Alert. |
| 1.3.6.1.4.1.1966.12.1.5.13 | TableportSSLTable | not-accessible | current | Port SSL Table. |
| 1.3.6.1.4.1.1966.12.1.5.13.1 | RowportSSLEntry | not-accessible | current | An entry in the portSSLEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.1 | ColumnportSSLIndex | not-accessible | current | port SSL Index |
| 1.3.6.1.4.1.1966.12.1.5.13.1.2 | ColumnportSSLStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.13.1.3 | ColumnportSSLEnabled | read-write | current | Enables/disables SSL. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.4 | ColumnportSSLuseServer | read-write | current | Uses the SSL/TLS server configuration for the line. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.5 | ColumnportSSLVersion | read-write | current | Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it wil… |
| 1.3.6.1.4.1.1966.12.1.5.13.1.6 | ColumnportSSLType | read-write | current | Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.7 | ColumnportSSLVerifyPeerCertificate | read-write | current | Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl… |
| 1.3.6.1.4.1.1966.12.1.5.13.1.8 | ColumnportSSLCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.9 | ColumnportSSLStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.10 | ColumnportSSLLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.11 | ColumnportSSLOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.12 | ColumnportSSLOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.13 | ColumnportSSLCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.5.13.1.14 | ColumnportSSLEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.5.14 | TableportPacketForwardingTable | not-accessible | current | The port packet forwarding configuration table. |
| 1.3.6.1.4.1.1966.12.1.5.14.1 | RowportPacketForwardingEntry | not-accessible | current | An entry in the port packet forwarding configuration table, each relating to a serial port. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.1 | ColumnportPacketForwardingIndex | not-accessible | current | Port Index |
| 1.3.6.1.4.1.1966.12.1.5.14.1.2 | ColumnportPacketForwardingStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.14.1.3 | ColumnportPacketForwardingPacketSize | read-write | current | When the size of the packet equals this value the packet is transmitted. 0 - Ignore option |
| 1.3.6.1.4.1.1966.12.1.5.14.1.4 | ColumnportPacketForwardingIdleTime | read-write | current | When the elapsed time between one character to another character equals this value the packet is transmitted. 0 - Ignore option |
| 1.3.6.1.4.1.1966.12.1.5.14.1.5 | ColumnportPacketForwardingForceTransmitTime | read-write | current | When the elapsed time from the 1st character received equals this value the packet is transmitted. 0 - Ignore option. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.6 | ColumnportPacketForwardingEnableSOF1 | read-write | current | Enable/disable the start of frame 1. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.7 | ColumnportPacketForwardingSOF1 | read-write | current | Any characters received before the start of frame is received will be ignored. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.8 | ColumnportPacketForwardingEnableSOF2 | read-write | current | Enable/disable the start of frame 2. When this is enabled SOF1 must enabled |
| 1.3.6.1.4.1.1966.12.1.5.14.1.9 | ColumnportPacketForwardingSOF2 | read-write | current | Any characters received before the start of frame is received will be ignored. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.10 | ColumnportPacketForwardingStartFrameTransmit | read-write | current | A flag to determine if we will transmit the start of frame character(s). |
| 1.3.6.1.4.1.1966.12.1.5.14.1.11 | ColumnportPacketForwardingEnableEOF1 | read-write | current | Enable/disable the end of frame 1. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.12 | ColumnportPacketForwardingEOF1 | read-write | current | The frame will be transmitted after this character is received based on the forwarding rule. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.13 | ColumnportPacketForwardingEnableEOF2 | read-write | current | Enable/disable the end of frame 2. When this is enabled EOF1 must enabled |
| 1.3.6.1.4.1.1966.12.1.5.14.1.14 | ColumnportPacketForwardingEOF2 | read-write | current | The frame will be transmitted after this character is received based on the forwarding rule. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.15 | ColumnportPacketForwardingEnableEndTrigger1 | read-write | current | Enable/disable the end of trigger 1. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.16 | ColumnportPacketForwardingEndTrigger1 | read-write | current | When the end trigger is received the packet will transmitted based on the forwarding rules. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.17 | ColumnportPacketForwardingEnableEndTrigger2 | read-write | current | Enable/disable the end of trigger 2. When this is enabled EOF1 must enabled |
| 1.3.6.1.4.1.1966.12.1.5.14.1.18 | ColumnportPacketForwardingEndTrigger2 | read-write | current | When the end trigger is received the packet will transmitted based on the forwarding rules. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.19 | ColumnportPacketForwardingForwardingRule | read-write | current | Forwarding rules. |
| 1.3.6.1.4.1.1966.12.1.5.14.1.20 | ColumnportPacketForwardingPacketIdleTime | read-write | current | When in Packet Accumulation mode it used for packet idle time |
| 1.3.6.1.4.1.1966.12.1.5.14.1.21 | ColumnportPacketForwardingForwardMode | read-write | current | Forwarding Mode. |
| 1.3.6.1.4.1.1966.12.1.5.15 | TableportTunnelTable | not-accessible | current | Port Tunnel Table. |
| 1.3.6.1.4.1.1966.12.1.5.15.1 | RowportTunnelEntry | not-accessible | current | An entry in the portTunnelEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.15.1.1 | ColumnportTunnelIndex | not-accessible | current | portTunnelIndex |
| 1.3.6.1.4.1.1966.12.1.5.15.1.2 | ColumnportTunnelStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.15.1.3 | ColumnportTunnelPort | read-write | current | The port number the target host is listening on for incoming connections. |
| 1.3.6.1.4.1.1966.12.1.5.15.1.4 | ColumnportTunnelHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.15.1.5 | ColumnportTunnelHttpTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.16 | TableportMODBUSSlaveTable | not-accessible | current | Port Modbus Slave Table. |
| 1.3.6.1.4.1.1966.12.1.5.16.1 | RowportMODBUSSlaveEntry | not-accessible | current | An entry in the portMODBUSSlaveEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.16.1.1 | ColumnportMODBUSSlaveIndex | not-accessible | current | portMODBUSSlaveIndex |
| 1.3.6.1.4.1.1966.12.1.5.16.1.2 | ColumnportMODBUSSlaveStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.16.1.3 | ColumnportMODBUSSlaveMode | read-write | current | Modbus serial device's mode: 0: RTU; 1: ASCII. |
| 1.3.6.1.4.1.1966.12.1.5.16.1.4 | ColumnportMODBUSSlaveCRLF | read-write | current | Enable/disable appending CR/LF |
| 1.3.6.1.4.1.1966.12.1.5.16.1.5 | ColumnportMODBUSSlaveUIDRange | read-write | current | The UID range for this entry. |
| 1.3.6.1.4.1.1966.12.1.5.17 | TableportMODBUSMasterTable | not-accessible | current | Port Modbus Master Table. |
| 1.3.6.1.4.1.1966.12.1.5.17.1 | RowportMODBUSMasterEntry | not-accessible | current | An entry in the portMODBUSMasterEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.17.1.1 | ColumnportMODBUSMasterIndex | not-accessible | current | portMODBUSMasterIndex |
| 1.3.6.1.4.1.1966.12.1.5.17.1.2 | ColumnportMODBUSMasterStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.17.1.3 | ColumnportMODBUSMasterMode | read-write | current | Modbus serial device's mode: 0: RTU; 1: ASCII. |
| 1.3.6.1.4.1.1966.12.1.5.17.1.4 | ColumnportMODBUSMasterCRLF | read-write | current | Enable/disable appending CR/LF |
| 1.3.6.1.4.1.1966.12.1.5.18 | TableportCustomAppTable | not-accessible | current | Port CustomApp Table. |
| 1.3.6.1.4.1.1966.12.1.5.18.1 | RowportCustomAppEntry | not-accessible | current | An entry in the PortCustomAppEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.18.1.1 | ColumnportCustomAppIndex | not-accessible | current | portCustomAppIndex |
| 1.3.6.1.4.1.1966.12.1.5.18.1.2 | ColumnportCustomAppStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.18.1.3 | ColumnportCustomAppCommand | read-write | current | The command line of the custom application. |
| 1.3.6.1.4.1.1966.12.1.5.19 | TableportTrueportServiceTable | not-accessible | current | Port TrueportService Table. |
| 1.3.6.1.4.1.1966.12.1.5.19.1 | RowportTrueportServiceEntry | not-accessible | current | An entry in the portTrueportServiceEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.19.1.1 | ColumnportTrueportServiceIndex | not-accessible | current | The index of the corresponding serial port. |
| 1.3.6.1.4.1.1966.12.1.5.19.1.2 | ColumnportTrueportServiceStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.19.1.3 | ColumnportTrueportServicePort | read-write | current | The port number the target host is listening on for incoming connections. |
| 1.3.6.1.4.1.1966.12.1.5.19.1.4 | ColumnportTrueportServiceHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.5.19.1.5 | ColumnportTrueportServiceClientInitiated | read-write | current | Specifies whether or not the network connection is initiated by the client |
| 1.3.6.1.4.1.1966.12.1.5.19.1.6 | ColumnportTrueportServiceActiveSignal | read-write | current | When the line becomes active, this option has the following impact: o Lite Mode-When enabled, the EIA-232 signals remain high (active) before, during, and afte… |
| 1.3.6.1.4.1.1966.12.1.5.19.1.7 | ColumnportTrueportServiceTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.20 | TableportPowerManagementTable | not-accessible | current | Port Power Management Table. |
| 1.3.6.1.4.1.1966.12.1.5.20.1 | RowportPowerManagementEntry | not-accessible | current | An entry in the portPowerManagementEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.20.1.1 | ColumnportPowerManagementIndex | not-accessible | current | portPowerManagementIndex |
| 1.3.6.1.4.1.1966.12.1.5.20.1.2 | ColumnportPowerManagementStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.20.1.3 | ColumnportPowerManagementName | read-write | current | Power bar's name. |
| 1.3.6.1.4.1.1966.12.1.5.20.1.4 | ColumnportPowerManagementModel | read-write | current | Power bar's model |
| 1.3.6.1.4.1.1966.12.1.5.21 | TableportMultihostTable | not-accessible | current | Port Multihost Table. |
| 1.3.6.1.4.1.1966.12.1.5.21.1 | RowportMultihostEntry | not-accessible | current | An entry in the portMultihostEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.5.21.1.1 | ColumnportMultihostIndex | not-accessible | current | portMultihostIndex |
| 1.3.6.1.4.1.1966.12.1.5.21.1.2 | ColumnportMultihostStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.21.1.4 | ColumnportMultihostMode | read-write | current | Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode |
| 1.3.6.1.4.1.1966.12.1.5.22 | TableportMultihostOutboundTable | not-accessible | current | Multihost outbound table. |
| 1.3.6.1.4.1.1966.12.1.5.22.1 | RowportMultihostOutboundEntry | not-accessible | current | An entry in the portMultihostOutboundTable. |
| 1.3.6.1.4.1.1966.12.1.5.22.1.1 | ColumnportMultihostPortIndex | not-accessible | current | The port number |
| 1.3.6.1.4.1.1966.12.1.5.22.1.2 | ColumnportMultihostOutboundIndex | not-accessible | current | The outbound entry number |
| 1.3.6.1.4.1.1966.12.1.5.22.1.3 | ColumnportMultihostOutboundStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.22.1.4 | ColumnportMultihostOutboundHostID | read-write | current | The host name. |
| 1.3.6.1.4.1.1966.12.1.5.22.1.5 | ColumnportMultihostOutboundTcpPort | read-write | current | The host TCP port. |
| 1.3.6.1.4.1.1966.12.1.5.22.1.6 | ColumnportMultihostOutboundTunnel | read-write | current | The HTTP tunnel associated with this host. |
| 1.3.6.1.4.1.1966.12.1.5.23 | TableportPowerManagementPlugTable | not-accessible | current | Power Management Plug Table. |
| 1.3.6.1.4.1.1966.12.1.5.23.1 | RowportPowerManagementPlugEntry | not-accessible | current | An entry in the portPowerManagementPlugTable, each relating to a plug. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.1 | ColumnportPowerManagementPortIndex | not-accessible | current | The port number |
| 1.3.6.1.4.1.1966.12.1.5.23.1.2 | ColumnportPowerManagementPlugIndex | not-accessible | current | The plug number |
| 1.3.6.1.4.1.1966.12.1.5.23.1.3 | ColumnportPowerManagementPlugStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.23.1.4 | ColumnportPowerManagementPlugName | read-write | current | The plug's name. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.5 | ColumnportPowerManagementPlugPowerUpInterval | read-write | current | The plug's power up delay. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.6 | ColumnportPowerManagementPlugDefaultState | read-write | current | the plug's default state. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.7 | ColumnportPowerManagementDSLine | read-write | current | the DS line number which the device on this plug is connected to(0:none, >0:corresponding to the line number. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.8 | ColumnportPowerManagementMonitorHost | read-write | current | The name of a host to monitor. If the host fails to respond to pings, this plug's power will be cycled. Set to a blank string to disable this feature. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.9 | ColumnportPowerManagementMonitorInterval | read-write | current | The time between pings, in minutes. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.10 | ColumnportPowerManagementMonitorTimeout | read-write | current | The amount of time to wait after pings, in seconds. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.11 | ColumnportPowerManagementMonitorRetries | read-write | current | The number of times to retry pings. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.12 | ColumnportPowerManagementMonitorEnableDelay | read-write | current | Wait before cycling power, in the event of a monitor timeout. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.13 | ColumnportPowerManagementMonitorDelay | read-write | current | Amount of time to wait before cycling power, in the event of a monitor timeout. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.14 | ColumnportPowerManagementMonitorEnableConsoleMsg | read-write | current | Display a message on the serial port, in the event of a monitor timeout, when power cycle delay is enabled.. |
| 1.3.6.1.4.1.1966.12.1.5.23.1.15 | ColumnportPowerManagementMonitorEnableEmail | read-write | current | Send an email alert, in the event of a monitor timeout, when power cycle delay is enabled.. |
| 1.3.6.1.4.1.1966.12.1.5.24 | TableportMODBUSMasterMappingTable | not-accessible | current | Modbus Master Slave Mapping. |
| 1.3.6.1.4.1.1966.12.1.5.24.1 | RowportMODBUSMasterMappingEntry | not-accessible | current | An entry in the portMODBUSMasterMappingTable, each relating to a slave mapping. |
| 1.3.6.1.4.1.1966.12.1.5.24.1.1 | ColumnportMODBUSMasterPortIndex | not-accessible | current | The port number |
| 1.3.6.1.4.1.1966.12.1.5.24.1.2 | ColumnportMODBUSMasterMappingIndex | not-accessible | current | The mapping table index |
| 1.3.6.1.4.1.1966.12.1.5.24.1.3 | ColumnportMODBUSMasterMappingStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.24.1.4 | ColumnportMODBUSMasterMappingRemoteIP | read-write | current | The remote slave's IP address. |
| 1.3.6.1.4.1.1966.12.1.5.24.1.5 | ColumnportMODBUSMasterMappingTransportType | read-write | current | The remote slave's transport protocol type (TCP/UDP). |
| 1.3.6.1.4.1.1966.12.1.5.24.1.6 | ColumnportMODBUSMasterMappingPortNumber | read-write | current | the transport protocol layer port number (TCP/UDP). |
| 1.3.6.1.4.1.1966.12.1.5.24.1.7 | ColumnportMODBUSMasterMappingUIDStart | read-write | current | The start UID of the UID range for this entry. |
| 1.3.6.1.4.1.1966.12.1.5.24.1.8 | ColumnportMODBUSMasterMappingUIDEnd | read-write | current | The end UID of the UID range for this entry. |
| 1.3.6.1.4.1.1966.12.1.5.24.1.9 | ColumnportMODBUSMasterMappingUIDRangeMode | read-write | current | The UID-IP mapping mode. |
| 1.3.6.1.4.1.1966.12.1.5.24.1.10 | ColumnportMODBUSMasterMappingTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.5.25 | TableportSSLCipherTable | not-accessible | current | SSL CIpher. |
| 1.3.6.1.4.1.1966.12.1.5.25.1 | RowportSSLCipherEntry | not-accessible | current | An entry in the sslCipherTable, each relating to a cipher entry. |
| 1.3.6.1.4.1.1966.12.1.5.25.1.1 | ColumnportSSLCipherIndex | not-accessible | current | The port number |
| 1.3.6.1.4.1.1966.12.1.5.25.1.2 | ColumnportSSLCipherPriority | not-accessible | current | The cipher priority. 1- highest 5 - lowest. |
| 1.3.6.1.4.1.1966.12.1.5.25.1.3 | ColumnportSSLCipherStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.5.25.1.4 | ColumnportSSLCipherEncryption | read-write | current | SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any. |
| 1.3.6.1.4.1.1966.12.1.5.25.1.5 | ColumnportSSLCipherKeySizeMin | read-write | current | The minimum key size value that will be used for the specified encryption type. The default is 40. |
| 1.3.6.1.4.1.1966.12.1.5.25.1.6 | ColumnportSSLCipherKeySizeMax | read-write | current | The maximum key size value that will be used for the specified encryption type. The default is 256. |
| 1.3.6.1.4.1.1966.12.1.5.25.1.7 | ColumnportSSLCipherKeyExchange | read-write | current | The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS… |
| 1.3.6.1.4.1.1966.12.1.5.25.1.8 | ColumnportSSLCipherHMAC | read-write | current | Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any. |
| 1.3.6.1.4.1.1966.12.1.6 | NodemodemInfo | |||
| 1.3.6.1.4.1.1966.12.1.6.1 | TablemodemInfoTable | not-accessible | current | The modem info table. |
| 1.3.6.1.4.1.1966.12.1.6.1.1 | RowmodemInfoEntry | not-accessible | current | An entry in the modemInfoTable, each relating to a host. |
| 1.3.6.1.4.1.1966.12.1.6.1.1.1 | ColumnmodemIndex | not-accessible | current | The table entry number for this modem |
| 1.3.6.1.4.1.1966.12.1.6.1.1.2 | ColumnmodemStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.6.1.1.3 | ColumnmodemName | read-write | current | The modem name used for this modem entry. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.6.1.1.4 | ColumnmodemInitialisation | read-write | current | The modem Initialisation string |
| 1.3.6.1.4.1.1966.12.1.7 | NodeservicesInfo | |||
| 1.3.6.1.4.1.1966.12.1.7.1 | ScalarserviceStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.7.2 | ScalarserviceDHCP | read-write | current | Turn on/off the DHCP Service on the first ethernet interface. |
| 1.3.6.1.4.1.1966.12.1.7.3 | ScalarserviceRouteD | read-write | current | RouteD Service |
| 1.3.6.1.4.1.1966.12.1.7.4 | ScalarserviceTelnetD | read-write | current | Turn on/off the TelnetD Service |
| 1.3.6.1.4.1.1966.12.1.7.5 | ScalarserviceSSHD | read-write | current | Turn on/off the SSHD Service |
| 1.3.6.1.4.1.1966.12.1.7.6 | ScalarserviceHTTPD | read-write | current | Turn on/off the HTTPD Service |
| 1.3.6.1.4.1.1966.12.1.7.7 | ScalarserviceSnmpD | read-write | current | Turn on/off the SnmpD Service |
| 1.3.6.1.4.1.1966.12.1.7.8 | ScalarserviceSPCD | read-write | current | Turn on/off the SPCD Service (TruePort) |
| 1.3.6.1.4.1.1966.12.1.7.9 | ScalarserviceSNTP | read-write | current | Turn on/off the SNTP Service |
| 1.3.6.1.4.1.1966.12.1.7.10 | ScalarserviceHTTPSD | read-write | current | Turn on/off the HTTPSD Service |
| 1.3.6.1.4.1.1966.12.1.7.11 | ScalarserviceSyslog | read-write | current | Turn on/off the Syslog Service |
| 1.3.6.1.4.1.1966.12.1.7.12 | ScalarserviceDeviceManagerD | read-write | current | Turn on/off the DeviceManagerD Service |
| 1.3.6.1.4.1.1966.12.1.7.13 | ScalarserviceMODBUSD | read-write | current | Turn on/off the Modbus Gateway Service |
| 1.3.6.1.4.1.1966.12.1.7.14 | ScalarserviceSecondaryDHCP | read-write | current | Turn on/off the DHCP Service on the eth2 interface |
| 1.3.6.1.4.1.1966.12.1.7.15 | ScalarserviceIPSEC | read-write | current | Turn on/off the IPSEC Service |
| 1.3.6.1.4.1.1966.12.1.7.16 | ScalarserviceIncomingPings | read-write | current | Allow incoming ping requests |
| 1.3.6.1.4.1.1966.12.1.7.17 | ScalarserviceThirdDHCP | read-write | current | Turn on/off the DHCP Service on the eth3 interface |
| 1.3.6.1.4.1.1966.12.1.8 | NodetrueportInfo | |||
| 1.3.6.1.4.1.1966.12.1.8.1 | ScalartrueportStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.8.2 | Scalartrueport50 | read-write | current | Mapping for trueport baud rate 50 |
| 1.3.6.1.4.1.1966.12.1.8.3 | Scalartrueport75 | read-write | current | Mapping for trueport baud rate 75 |
| 1.3.6.1.4.1.1966.12.1.8.4 | Scalartrueport110 | read-write | current | Mapping for trueport baud rate 110 |
| 1.3.6.1.4.1.1966.12.1.8.5 | Scalartrueport134 | read-write | current | Mapping for trueport baud rate 134 |
| 1.3.6.1.4.1.1966.12.1.8.6 | Scalartrueport150 | read-write | current | Mapping for trueport baud rate 150 |
| 1.3.6.1.4.1.1966.12.1.8.7 | Scalartrueport200 | read-write | current | Mapping for trueport baud rate 200 |
| 1.3.6.1.4.1.1966.12.1.8.8 | Scalartrueport300 | read-write | current | Mapping for trueport baud rate 300 |
| 1.3.6.1.4.1.1966.12.1.8.9 | Scalartrueport600 | read-write | current | Mapping for trueport baud rate 600 |
| 1.3.6.1.4.1.1966.12.1.8.10 | Scalartrueport1200 | read-write | current | Mapping for trueport baud rate 1200 |
| 1.3.6.1.4.1.1966.12.1.8.11 | Scalartrueport1800 | read-write | current | Mapping for trueport baud rate 1800 |
| 1.3.6.1.4.1.1966.12.1.8.12 | Scalartrueport2400 | read-write | current | Mapping for trueport baud rate 2400 |
| 1.3.6.1.4.1.1966.12.1.8.13 | Scalartrueport4800 | read-write | current | Mapping for trueport baud rate 4800 |
| 1.3.6.1.4.1.1966.12.1.8.14 | Scalartrueport9600 | read-write | current | Mapping for trueport baud rate 9600 |
| 1.3.6.1.4.1.1966.12.1.8.15 | Scalartrueport19200 | read-write | current | Mapping for trueport baud rate 19200 |
| 1.3.6.1.4.1.1966.12.1.8.16 | Scalartrueport38400 | read-write | current | Mapping for trueport baud rate 38400 |
| 1.3.6.1.4.1.1966.12.1.8.17 | ScalartrueportCustom50 | read-write | current | Mapping for trueport baud rate 50 |
| 1.3.6.1.4.1.1966.12.1.8.18 | ScalartrueportCustom75 | read-write | current | custom mapping for trueport baud rate 75 |
| 1.3.6.1.4.1.1966.12.1.8.19 | ScalartrueportCustom110 | read-write | current | custom mapping for trueport baud rate 110 |
| 1.3.6.1.4.1.1966.12.1.8.20 | ScalartrueportCustom134 | read-write | current | custom mapping for trueport baud rate 134 |
| 1.3.6.1.4.1.1966.12.1.8.21 | ScalartrueportCustom150 | read-write | current | custom mapping for trueport baud rate 150 |
| 1.3.6.1.4.1.1966.12.1.8.22 | ScalartrueportCustom200 | read-write | current | custom mapping for trueport baud rate 200 |
| 1.3.6.1.4.1.1966.12.1.8.23 | ScalartrueportCustom300 | read-write | current | custom mapping for trueport baud rate 300 |
| 1.3.6.1.4.1.1966.12.1.8.24 | ScalartrueportCustom600 | read-write | current | custom mapping for trueport baud rate 600 |
| 1.3.6.1.4.1.1966.12.1.8.25 | ScalartrueportCustom1200 | read-write | current | custom mapping for trueport baud rate 1200 |
| 1.3.6.1.4.1.1966.12.1.8.26 | ScalartrueportCustom1800 | read-write | current | custom mapping for trueport baud rate 1800 |
| 1.3.6.1.4.1.1966.12.1.8.27 | ScalartrueportCustom2400 | read-write | current | custom mapping for trueport baud rate 2400 |
| 1.3.6.1.4.1.1966.12.1.8.28 | ScalartrueportCustom4800 | read-write | current | custom mapping for trueport baud rate 4800 |
| 1.3.6.1.4.1.1966.12.1.8.29 | ScalartrueportCustom9600 | read-write | current | custom mapping for trueport baud rate 9600 |
| 1.3.6.1.4.1.1966.12.1.8.30 | ScalartrueportCustom19200 | read-write | current | custom mapping for trueport baud rate 19200 |
| 1.3.6.1.4.1.1966.12.1.8.31 | ScalartrueportCustom38400 | read-write | current | custom mapping for trueport baud rate 38400 |
| 1.3.6.1.4.1.1966.12.1.9 | NoderadiusInfo | |||
| 1.3.6.1.4.1.1966.12.1.9.1 | ScalarradiusStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.9.2 | ScalarradiusPrimaryAuthHost | read-write | current | Primary Radius Authentication Host |
| 1.3.6.1.4.1.1966.12.1.9.3 | ScalarradiusSecondaryAuthHost | read-write | current | Secondary Radius Authentication Host |
| 1.3.6.1.4.1.1966.12.1.9.4 | ScalarradiusAuthenticationPort | read-write | current | The port that the RADIUS host listens to for authentication requests. The default port is 1812. |
| 1.3.6.1.4.1.1966.12.1.9.5 | ScalarradiusAccountingEnabled | read-write | current | Radius Accounting enabled |
| 1.3.6.1.4.1.1966.12.1.9.6 | ScalarradiusPrimaryAcctHost | read-write | current | Name of the primary RADIUS authentication host. |
| 1.3.6.1.4.1.1966.12.1.9.7 | ScalarradiusSecondaryAcctHost | read-write | current | Name of the secondary RADIUS authentication host. |
| 1.3.6.1.4.1.1966.12.1.9.8 | ScalarradiusAccountingPort | read-write | current | The port that the RADIUS host listens to for accounting requests. The default port is 1813. |
| 1.3.6.1.4.1.1966.12.1.9.9 | ScalarradiusAcctAuth | read-write | current | Radius Accounting Authenticator enabled |
| 1.3.6.1.4.1.1966.12.1.9.10 | ScalarradiusRetryLimit | read-write | current | The number of times the Device Server tries to connect to the RADIUS server before erroring out. Valid values are 0-255. The default is 5. |
| 1.3.6.1.4.1.1966.12.1.9.11 | ScalarradiusTimeout | read-write | current | The time, in seconds, that the Device Server waits to receive a reply after sending out a request to a RADIUS accounting or authentication host. If no reply is… |
| 1.3.6.1.4.1.1966.12.1.9.12 | ScalarradiusNasIdentifier | read-write | current | The NAS identifier name. To delete this , set this field to blank. |
| 1.3.6.1.4.1.1966.12.1.9.13 | ScalarradiusNasIpAddress | read-write | current | When on, the NAS Identifier obtains ipv4 address automatically. Default is on. |
| 1.3.6.1.4.1.1966.12.1.9.14 | ScalarradiusNasSpecifyIpAddress | read-write | current | Specify the unique IPv4 address that NAS Identifier will use |
| 1.3.6.1.4.1.1966.12.1.9.15 | ScalarradiusNasIpv6Address | read-write | current | When on, the NAS Identifier obtains ipv6 address automatically. Default is on. |
| 1.3.6.1.4.1.1966.12.1.9.16 | ScalarradiusNasSpecifyIpv6Address | read-write | current | Specify the unique IPv6 address that NAS Identifier will use |
| 1.3.6.1.4.1.1966.12.1.9.17 | ScalarradiusPrimaryAuthTunnel | read-write | current | Primary Radius Authentication Tunnel |
| 1.3.6.1.4.1.1966.12.1.9.18 | ScalarradiusSecondaryAuthTunnel | read-write | current | Secondary Radius Authentication Tunnel |
| 1.3.6.1.4.1.1966.12.1.9.19 | ScalarradiusPrimaryAcctTunnel | read-write | current | Name of the primary RADIUS authentication tunnel. |
| 1.3.6.1.4.1.1966.12.1.9.20 | ScalarradiusSecondaryAcctTunnel | read-write | current | Name of the secondary RADIUS authentication tunnel. |
| 1.3.6.1.4.1.1966.12.1.10 | NodekerberosInfo | |||
| 1.3.6.1.4.1.1966.12.1.10.1 | ScalarkerberosStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.10.2 | ScalarkerberosRealm | read-write | current | The Kerberos realm is the Kerberos host domain name, in upper-case letters. |
| 1.3.6.1.4.1.1966.12.1.10.3 | ScalarkerberosDomain | read-write | current | The name of a host running the KDC (Key Distribution Center) for the specified realm. The host name that you specify must either be defined in the Device Serve… |
| 1.3.6.1.4.1.1966.12.1.10.4 | ScalarkerberosPort | read-write | current | The port that the Kerberos server listens to for authentication requests. If no port is specified, the default port 88 is used. |
| 1.3.6.1.4.1.1966.12.1.11 | NodeldapInfo | |||
| 1.3.6.1.4.1.1966.12.1.11.1 | ScalarldapStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.11.2 | ScalarldapHost | read-write | current | The name or IP address of the LDAP host. If you use a host name, that host must either have been defined in the Device Server's Host Table before the last rebo… |
| 1.3.6.1.4.1.1966.12.1.11.3 | ScalarldapPort | read-write | current | The port that the LDAP host listens to for authentication requests. The default port is 389. |
| 1.3.6.1.4.1.1966.12.1.11.4 | ScalarldapBase | read-write | current | The domain component (dc) that is the starting point for the search for user authentication. |
| 1.3.6.1.4.1.1966.12.1.11.5 | ScalarldapEnableTLS | read-write | current | Enables/disables the Transport Layer Security (TLS) with the LDAP host. |
| 1.3.6.1.4.1.1966.12.1.11.6 | ScalarldapTLSPort | read-write | current | Specify the port number that LDAP will use for TLS. The default is port 636. |
| 1.3.6.1.4.1.1966.12.1.11.7 | ScalarldapUID | read-write | current | LDAP user attribute. e.g. uid (OpenLDAP) sAMAccountName (Active Directory) The default is 'uid'. |
| 1.3.6.1.4.1.1966.12.1.11.8 | ScalarldapPasswordEncryption | read-write | current | LDAP password encryption method. |
| 1.3.6.1.4.1.1966.12.1.11.9 | ScalarldapClientAuth | read-write | current | LDAP client authentication. |
| 1.3.6.1.4.1.1966.12.1.11.10 | ScalarldapClientName | read-write | current | LDAP client name. Identifies the unit to the LDAP server, when client authentication is enabled. |
| 1.3.6.1.4.1.1966.12.1.11.11 | ScalarldapClientAppendBase | read-write | current | Append base to LDAP client name. |
| 1.3.6.1.4.1.1966.12.1.11.12 | ScalarldapClientPassword | read-write | current | LDAP client password. Identifies the unit to the LDAP server, when client authentication is enabled. |
| 1.3.6.1.4.1.1966.12.1.11.13 | ScalarldapHostTunnel | read-write | current | The HTTP tunnel associated with the LDAP host. |
| 1.3.6.1.4.1.1966.12.1.12 | NodetacacsInfo | |||
| 1.3.6.1.4.1.1966.12.1.12.1 | ScalartacacsStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.12.2 | ScalartacacsPrimaryHost | read-write | current | The primary TACACS+ host that is used for authentication. |
| 1.3.6.1.4.1.1966.12.1.12.3 | ScalartacacsSecondaryHost | read-write | current | The secondary TACACS+ host that is used for authentication, should the primary TACACS+ host fail to respond. |
| 1.3.6.1.4.1.1966.12.1.12.4 | ScalartacacsPort | read-write | current | The port number that TACACS+ listens to for authentication requests. The default port number is 49. |
| 1.3.6.1.4.1.1966.12.1.12.5 | ScalartacacsAccounting | read-write | current | Enable/Disable TACACS+ accounting |
| 1.3.6.1.4.1.1966.12.1.12.6 | ScalartacacsAccountingPrimaryHost | read-write | current | The primary TACACS+ accounting host that is used for. |
| 1.3.6.1.4.1.1966.12.1.12.7 | ScalartacacsAccountingSecondaryHost | read-write | current | The secondary TACACS+ accounting host that is used for , should the primary TACACS+ host fail to respond. |
| 1.3.6.1.4.1.1966.12.1.12.8 | ScalartacacsAccountingPort | read-write | current | The port number that TACACS+ listens to for accounting requests. The default port number is 49. |
| 1.3.6.1.4.1.1966.12.1.12.9 | ScalartacacsAuthorization | read-write | current | Enable/Disable TACACS+ authorisation |
| 1.3.6.1.4.1.1966.12.1.12.10 | ScalartacacsAlternateServiceNames | read-write | current | Enable alternate service names for TACACS+. |
| 1.3.6.1.4.1.1966.12.1.12.11 | ScalartacacsPrimaryTunnel | read-write | current | The HTTP tunnel associated with the primary authentication server |
| 1.3.6.1.4.1.1966.12.1.12.12 | ScalartacacsSecondaryTunnel | read-write | current | The HTTP tunnel associated with the secondary authentication server |
| 1.3.6.1.4.1.1966.12.1.12.13 | ScalartacacsAccountingPrimaryTunnel | read-write | current | The HTTP tunnel associated with the primary accounting server |
| 1.3.6.1.4.1.1966.12.1.12.14 | ScalartacacsAccountingSecondaryTunnel | read-write | current | The HTTP tunnel associated with the secondary accounting server |
| 1.3.6.1.4.1.1966.12.1.13 | NodesecuridInfo | |||
| 1.3.6.1.4.1.1966.12.1.13.1 | ScalarsecuridStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.13.2 | ScalarsecuridMasterHost | read-write | current | The first SecurID server that is tried for user authentication. |
| 1.3.6.1.4.1.1966.12.1.13.3 | ScalarsecuridSlaveHost | read-write | current | If the first SecurID server does not respond to an authentication request, this is the next SecurID server that is tried for user authentication. |
| 1.3.6.1.4.1.1966.12.1.13.4 | ScalarsecuridPort | read-write | current | The port number that SecurID listens to for authentication requests. The default port number is 5500. |
| 1.3.6.1.4.1.1966.12.1.13.5 | ScalarsecuridType | read-write | current | You can specify either SDI or DES encryption for SecurID server communication. The default is SDI encryption. |
| 1.3.6.1.4.1.1966.12.1.13.6 | ScalarsecuridLegacy | read-write | current | If you are running SecurID 3.x or 4.x, you need to run in Legacy Mode. If you are running SecurID 5.x or above, do not select Legacy Mode. |
| 1.3.6.1.4.1.1966.12.1.13.7 | ScalarsecuridMasterTunnel | read-write | current | HTTP tunnel associated with master host. |
| 1.3.6.1.4.1.1966.12.1.13.8 | ScalarsecuridSlaveTunnel | read-write | current | HTTP tunnel associated with slave host. |
| 1.3.6.1.4.1.1966.12.1.14 | NodenisInfo | |||
| 1.3.6.1.4.1.1966.12.1.14.1 | ScalarnisStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.14.2 | ScalarnisDomain | read-write | current | The NIS domain name. |
| 1.3.6.1.4.1.1966.12.1.14.3 | ScalarnisPrimaryHost | read-write | current | The primary NIS host that is used for authentication. |
| 1.3.6.1.4.1.1966.12.1.14.4 | ScalarnisSecondaryHost | read-write | current | The secondary NIS host that is used for authentication, should the primary NIS host fail to respond. |
| 1.3.6.1.4.1.1966.12.1.14.5 | ScalarnisPrimaryTunnel | read-write | current | The HTTP tunnel associated with the primary host. |
| 1.3.6.1.4.1.1966.12.1.14.6 | ScalarnisSecondaryTunnel | read-write | current | The HTTP tunnel associated with the secondary host. |
| 1.3.6.1.4.1.1966.12.1.15 | NodesshServerInfo | |||
| 1.3.6.1.4.1.1966.12.1.15.1 | ScalarsshServerStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.15.2 | ScalarsshServerRSA | read-write | current | When a client SSH session requests RSA authentication, the Device Server's SSH server will authenticate the user via RSA. |
| 1.3.6.1.4.1.1966.12.1.15.3 | ScalarsshServerDSA | read-write | current | When a client SSH session requests DSA authentication, the Device Server's SSH server will authenticate the user via DSA |
| 1.3.6.1.4.1.1966.12.1.15.4 | ScalarsshServerKeyboard | read-write | current | The user types in a password for authentication. |
| 1.3.6.1.4.1.1966.12.1.15.5 | ScalarsshServer3Des | read-write | current | The Device Server SSH server's 3DES encryption is enabled/disabled. |
| 1.3.6.1.4.1.1966.12.1.15.6 | ScalarsshServerBlowfish | read-write | current | The Device Server SSH server's Blowfish encryption is enabled/disabled. |
| 1.3.6.1.4.1.1966.12.1.15.7 | ScalarsshServerAES | read-write | current | The Device Server SSH server's AES-CBC encryption is enabled/disabled |
| 1.3.6.1.4.1.1966.12.1.15.8 | ScalarsshServerCAST | read-write | current | The Device Server SSH server's CAST encryption is enabled/disabled |
| 1.3.6.1.4.1.1966.12.1.15.9 | ScalarsshServerArcfour | read-write | current | The Device Server SSH server's Arcfour encryption is enabled/disabled. |
| 1.3.6.1.4.1.1966.12.1.15.10 | ScalarsshServerVerbose | read-write | current | Displays debug messages on the terminal. |
| 1.3.6.1.4.1.1966.12.1.15.11 | ScalarsshServerCompression | read-write | current | Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks. |
| 1.3.6.1.4.1.1966.12.1.15.12 | ScalarsshServerBreakString | read-write | current | The break string used for inband SSH break signal processing. A break signal is generated on a specific serial port only when the server's break option is enab… |
| 1.3.6.1.4.1.1966.12.1.15.13 | ScalarsshServerSSH1 | read-write | current | Enable/Disable SSH-1 on the server. |
| 1.3.6.1.4.1.1966.12.1.15.14 | ScalarsshServerPassword | read-write | current | The user types in a password for authentication. |
| 1.3.6.1.4.1.1966.12.1.15.15 | ScalarsshServerLoginTimeout | read-write | current | The number of seconds that the ssh session will wait to complete the login process. If the timer expires, then the ssh session will be terminated. |
| 1.3.6.1.4.1.1966.12.1.15.16 | ScalarsshServerAESctr | read-write | current | The Device Server SSH server's AES-CTR encryption is enabled/disabled. |
| 1.3.6.1.4.1.1966.12.1.15.17 | ScalarsshServerAESgcm | read-write | current | The Device Server SSH server's AES-GCM encryption is enabled/disabled. |
| 1.3.6.1.4.1.1966.12.1.15.18 | ScalarsshServerChaCha20Poly1305 | read-write | current | The Device Server SSH server's ChaCha20-Poly1305 encryption is enabled/disabled. |
| 1.3.6.1.4.1.1966.12.1.16 | NodedefUserInfo | |||
| 1.3.6.1.4.1.1966.12.1.16.1 | ScalardefUserStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.16.2 | ScalardefUserService | read-write | current | The type of service that the user will use: dsprompt, telnet, ssh, rlogin, slip, ppp, tcpclear or sslraw. |
| 1.3.6.1.4.1.1966.12.1.16.3 | ScalardefUserLanguage | read-write | current | You can specify whether a user will use English or Customlang as the language that appears in the Menu, CLI, or WebManager. The Device Server supports one cust… |
| 1.3.6.1.4.1.1966.12.1.16.4 | ScalardefUserLevel | read-write | current | The access that a user is allowed: Admin-The admin level user has total access to the Device Server. You can create more than one admin user account but we rec… |
| 1.3.6.1.4.1.1966.12.1.16.5 | ScalardefUserHotKeyPrefix | read-write | current | The prefix that a user types to control the current session. The default value is hex 01, which corresponds to Ctrl-a (^a) (hex value 02 would be Ctrl-b (^b), … |
| 1.3.6.1.4.1.1966.12.1.16.6 | ScalardefUserPhoneNumber | read-write | current | The phone number the Device Server will dial to callback the user (you must have set Callback to On). Enter the number without spaces. |
| 1.3.6.1.4.1.1966.12.1.16.7 | ScalardefUserCallBack | read-write | current | When On, enter a phone number for the Device Server to call the user back (the Callback parameter is unrelated to the Line Dial parameter). Note: the Device Se… |
| 1.3.6.1.4.1.1966.12.1.16.8 | ScalardefUserIdleTimer | read-write | current | The amount of time, in seconds, that the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, because … |
| 1.3.6.1.4.1.1966.12.1.16.9 | ScalardefUserSessionTimer | read-write | current | Enter a time, in seconds, for which the Session Timer will run. Use this timer to forcibly close the session (connection). When the Session Timer expires, the … |
| 1.3.6.1.4.1.1966.12.1.16.10 | ScalardefUserIpHost | read-write | current | When the User Service is set to Telnet, TCP_clear or SSL_RAW, the target host IP address. If 255.255.255.255 is specified in the configuration, the user will b… |
| 1.3.6.1.4.1.1966.12.1.16.11 | ScalardefUserTelnetPort | read-write | current | The port number the target host is listening on for incoming connections. Default is 23. |
| 1.3.6.1.4.1.1966.12.1.16.12 | ScalardefUserSSHPort | read-write | current | userSSHPort |
| 1.3.6.1.4.1.1966.12.1.16.13 | ScalardefUserTcpClearPort | read-write | current | The port number for the TCP-Clear or SSL-Raw session. |
| 1.3.6.1.4.1.1966.12.1.16.14 | ScalardefUserFramedIp | read-write | current | Used for User Service PPP or SLIP, sets the IP address of the remote user. Enter the address in dot decimal notation as follows: 255.255.255.254 (default)-The … |
| 1.3.6.1.4.1.1966.12.1.16.15 | ScalardefUserSubnetBits | read-write | current | (IPv4 only) If the remote user is on a subnet, enter the number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. |
| 1.3.6.1.4.1.1966.12.1.16.16 | ScalardefUserIpv6InterfaceId | read-write | current | Used for User Service PPP, sets the IP address of the remote user. Enter the address in IPv6 format. The first 64 bits of the Interface Identifier must be zero… |
| 1.3.6.1.4.1.1966.12.1.16.17 | ScalardefUserFramedMtu | read-write | current | Used for User Service PPP or SLIP, specifies the maximum size of packets, in bytes, being transferred across the link. On noisy links it might be preferable to… |
| 1.3.6.1.4.1.1966.12.1.16.18 | ScalardefUserFramedCompression | read-write | current | Used for User Service PPP or SLIP, determines whether Van Jacobsen Compression is used on the link. VJ compression is a means of reducing the standard TCP/IP h… |
| 1.3.6.1.4.1.1966.12.1.16.19 | ScalardefUserRouting | read-write | current | Determines the routing mode used for RIP packets on the PPP and SLIP interfaces. Values are: None-RIP packets are neither received nor sent by the Device Serve… |
| 1.3.6.1.4.1.1966.12.1.16.20 | ScalardefUserAllowAccessClusterPorts | read-write | current | Allow/disallow the user to access to clustering ports. |
| 1.3.6.1.4.1.1966.12.1.16.21 | ScalardefUserHost | read-write | current | The name of the host. |
| 1.3.6.1.4.1.1966.12.1.16.22 | TabledefUserPortAccessTable | not-accessible | current | The port access info table for user. |
| 1.3.6.1.4.1.1966.12.1.16.22.1 | RowdefUserPortAccessEntry | not-accessible | current | An entry in the portAccessTable, each relating to a user's access privileges for a serial port. |
| 1.3.6.1.4.1.1966.12.1.16.22.1.1 | ColumndefUserPortAccessPortIndex | not-accessible | current | The port number that user access applies to. |
| 1.3.6.1.4.1.1966.12.1.16.22.1.2 | ColumndefUserPortAccessStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.16.22.1.3 | ColumndefUserPortRWAccessAllowed | read-write | current | Enable or disable the user's read write access to the port. |
| 1.3.6.1.4.1.1966.12.1.16.22.1.4 | ColumndefUserPortRIAccessAllowed | read-write | current | Enable or disable the user's read input access to the port. |
| 1.3.6.1.4.1.1966.12.1.16.22.1.5 | ColumndefUserPortROAccessAllowed | read-write | current | Enable or disable the user's read output access to the port. |
| 1.3.6.1.4.1.1966.12.1.17 | NodesnmpInfo | |||
| 1.3.6.1.4.1.1966.12.1.17.1 | ScalarsnmpStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.17.2 | ScalarsnmpContact | read-write | current | The name and contract information of the person who manages this SMNP node. |
| 1.3.6.1.4.1.1966.12.1.17.3 | ScalarsnmpLocation | read-write | current | The physical location of the SNMP node. |
| 1.3.6.1.4.1.1966.12.1.17.4 | ScalarsnmpReadOnlyUser | read-write | current | (SNMP version 3) Specified user can only view SNMP variables. |
| 1.3.6.1.4.1.1966.12.1.17.5 | ScalarsnmpReadWriteUser | read-write | current | (SNMP version 3) Specified user can view and edit SNMP variables. |
| 1.3.6.1.4.1.1966.12.1.17.6 | TablesnmpCommunityTable | not-accessible | current | snmpCommunityTable |
| 1.3.6.1.4.1.1966.12.1.17.6.1 | RowsnmpCommunityEntry | not-accessible | current | snmpCommunityEntry |
| 1.3.6.1.4.1.1966.12.1.17.6.1.1 | ColumnsnmpCommunityIndex | not-accessible | current | snmpCommunityIndex |
| 1.3.6.1.4.1.1966.12.1.17.6.1.2 | ColumnsnmpCommunityStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.17.6.1.3 | ColumnsnmpCommunityName | read-write | current | A name that will be sent to the Device Server from an SNMP manager. This name will define the permissions of the manager. |
| 1.3.6.1.4.1.1966.12.1.17.6.1.4 | ColumnsnmpCommunityIpAddress | read-write | current | The IP address of the SNMP manager that will send requests to the Device Server. If the address is 0.0.0.0, any SNMP manager with the Community Name can access… |
| 1.3.6.1.4.1.1966.12.1.17.6.1.5 | ColumnsnmpCommunityPermission | read-write | current | Permits the Device Server to respond to SNMP requests by: None-There is no response to requests from SNMP. Readonly-Responds only to Read requests from SNMP. R… |
| 1.3.6.1.4.1.1966.12.1.17.7 | TablesnmpTrapTable | not-accessible | current | snmpTrapTable |
| 1.3.6.1.4.1.1966.12.1.17.7.1 | RowsnmpTrapEntry | not-accessible | current | snmpTrapEntry |
| 1.3.6.1.4.1.1966.12.1.17.7.1.1 | ColumnsnmpTrapIndex | not-accessible | current | snmpTrapIndex |
| 1.3.6.1.4.1.1966.12.1.17.7.1.2 | ColumnsnmpTrapStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.17.7.1.3 | ColumnsnmpTrapName | read-write | current | An arbitrary trap community name. |
| 1.3.6.1.4.1.1966.12.1.17.7.1.4 | ColumnsnmpTrapIpAddress | read-write | current | Defines the hosts (by IP address) that will receive trap messages generated by the Device Server. Up to four trap hosts can be defined. |
| 1.3.6.1.4.1.1966.12.1.17.7.1.5 | ColumnsnmpTrapTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.17.7.1.6 | ColumnsnmpTrapVersion | read-write | current | Set trap version. |
| 1.3.6.1.4.1.1966.12.1.17.7.1.7 | ColumnsnmpTrapType | read-write | current | Set trap type. Inform is only valid for v2c or v3. |
| 1.3.6.1.4.1.1966.12.1.17.7.1.8 | ColumnsnmpTrapEnable | read-write | current | Set trap enabled. |
| 1.3.6.1.4.1.1966.12.1.17.8 | ScalarsnmpReadOnlySecurityLevel | read-write | current | Set read only user security level. |
| 1.3.6.1.4.1.1966.12.1.17.9 | ScalarsnmpReadOnlyAuthAlgorithm | read-write | current | Set read only user authentication method. |
| 1.3.6.1.4.1.1966.12.1.17.10 | ScalarsnmpReadOnlyAuthPasswd | read-write | current | set read only user authentication password. |
| 1.3.6.1.4.1.1966.12.1.17.11 | ScalarsnmpReadOnlyPrivacyAlgorithm | read-write | current | Set read only user privacy algorithm. |
| 1.3.6.1.4.1.1966.12.1.17.12 | ScalarsnmpReadOnlyPrivacyPasswd | read-write | current | set read only user privacy password. |
| 1.3.6.1.4.1.1966.12.1.17.13 | ScalarsnmpReadWriteSecurityLevel | read-write | current | Set read write user security level. |
| 1.3.6.1.4.1.1966.12.1.17.14 | ScalarsnmpReadWriteAuthAlgorithm | read-write | current | Set read write user authentication method. |
| 1.3.6.1.4.1.1966.12.1.17.15 | ScalarsnmpReadWriteAuthPasswd | read-write | current | set read write user authentication password. |
| 1.3.6.1.4.1.1966.12.1.17.16 | ScalarsnmpReadWritePrivacyAlgorithm | read-write | current | Set read write user privacy algorithm. |
| 1.3.6.1.4.1.1966.12.1.17.17 | ScalarsnmpReadWritePrivacyPasswd | read-write | current | set read write user privacy password. |
| 1.3.6.1.4.1.1966.12.1.17.18 | ScalarsnmpTrapUser | read-write | current | (SNMP version 3) Specified user for sending traps. |
| 1.3.6.1.4.1.1966.12.1.17.19 | ScalarsnmpTrapSecurityLevel | read-write | current | Set trap user security level. |
| 1.3.6.1.4.1.1966.12.1.17.20 | ScalarsnmpTrapAuthAlgorithm | read-write | current | Set trap user authentication method. |
| 1.3.6.1.4.1.1966.12.1.17.21 | ScalarsnmpTrapAuthPasswd | read-write | current | set trap user authentication password. |
| 1.3.6.1.4.1.1966.12.1.17.22 | ScalarsnmpTrapPrivacyAlgorithm | read-write | current | Set trap user privacy algorithm. |
| 1.3.6.1.4.1.1966.12.1.17.23 | ScalarsnmpTrapPrivacyPasswd | read-write | current | set trap user privacy password. |
| 1.3.6.1.4.1.1966.12.1.17.24 | ScalarsnmpEngineIdString | read-write | current | set the string to use to create the engine ID. |
| 1.3.6.1.4.1.1966.12.1.17.25 | ScalarsnmpEngineId | read-only | current | Displays the current engine ID. |
| 1.3.6.1.4.1.1966.12.1.17.26 | ScalarsnmpInformTimeout | read-write | current | Set Inform timeout in seconds. |
| 1.3.6.1.4.1.1966.12.1.17.27 | ScalarsnmpInformRetries | read-write | current | Set Inform retries in seconds. |
| 1.3.6.1.4.1.1966.12.1.18 | NodednsInfo | |||
| 1.3.6.1.4.1.1966.12.1.18.1 | TablednsTable | not-accessible | current | dnsTable |
| 1.3.6.1.4.1.1966.12.1.18.1.1 | RowdnsEntry | not-accessible | current | dnsEntry |
| 1.3.6.1.4.1.1966.12.1.18.1.1.1 | ColumndnsIndex | not-accessible | current | dnsIndex |
| 1.3.6.1.4.1.1966.12.1.18.1.1.2 | ColumndnsStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.18.1.1.3 | ColumndnsIpAddress | read-write | current | You can specify the IP addresses for up to two DNS (Domain Name Servers) hosts in your network. The first DNS entry in the list is the primary DNS and the seco… |
| 1.3.6.1.4.1.1966.12.1.18.1.1.4 | ColumndnsActive | read-write | current | Activates/deactivates a DNS entry. |
| 1.3.6.1.4.1.1966.12.1.19 | NodewinsInfo | |||
| 1.3.6.1.4.1.1966.12.1.19.1 | TablewinsTable | not-accessible | current | winsTable |
| 1.3.6.1.4.1.1966.12.1.19.1.1 | RowwinsEntry | not-accessible | current | winsEntry |
| 1.3.6.1.4.1.1966.12.1.19.1.1.1 | ColumnwinsIndex | not-accessible | current | winsIndex |
| 1.3.6.1.4.1.1966.12.1.19.1.1.2 | ColumnwinsStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.19.1.1.3 | ColumnwinsIpAddress | read-write | current | You can specify the IP addresses for up to two WINS (Windows Internet Naming Service) hosts in your network. The first WINS entry in the list is the primary WI… |
| 1.3.6.1.4.1.1966.12.1.19.1.1.4 | ColumnwinsActive | read-write | current | Activates/deactivates a WINS entry. |
| 1.3.6.1.4.1.1966.12.1.20 | NodegatewayInfo | |||
| 1.3.6.1.4.1.1966.12.1.20.1 | TablegatewayTable | not-accessible | current | gatewayTable |
| 1.3.6.1.4.1.1966.12.1.20.1.1 | RowgatewayEntry | not-accessible | current | gatewayEntry |
| 1.3.6.1.4.1.1966.12.1.20.1.1.1 | ColumngatewayIndex | not-accessible | current | gatewayIndex |
| 1.3.6.1.4.1.1966.12.1.20.1.1.2 | ColumngatewayStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.20.1.1.3 | ColumngatewayHost | read-write | current | You can specify up to twenty hosts to act as gateways in your network. Each gateway host must be defined in the Device Server host table. |
| 1.3.6.1.4.1.1966.12.1.20.1.1.4 | ColumngatewayType | read-write | current | Specify the type of gateway: Default-A gateway which provides general access beyond your local network. Host-A gateway reserved for accessing a specific host e… |
| 1.3.6.1.4.1.1966.12.1.20.1.1.5 | ColumngatewayIpAddress | read-write | current | When the gateway is a Host or Network gateway, you must specify the IP address of the target host machine/network. |
| 1.3.6.1.4.1.1966.12.1.20.1.1.6 | ColumngatewaySubnetBits | read-write | current | When the gateway is a Network gateway, you must specify the subnet/prefix bits for that network. If the IP address is IPv4, then the Subnet/Prefix Bits range i… |
| 1.3.6.1.4.1.1966.12.1.20.1.1.7 | ColumngatewayInterface | read-write | current | The interface that the device server is going to use to access the Remote Host. The list is comprised of the Ethernet interface(s) and serial ports configured … |
| 1.3.6.1.4.1.1966.12.1.21 | NodesyslogInfo | |||
| 1.3.6.1.4.1.1966.12.1.21.1 | ScalarsyslogStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.21.2 | ScalarsyslogPrimaryHost | read-write | current | The first preconfigured host that the Device Server will attempt to send system log messages to; messages will be displayed on the host's monitor. |
| 1.3.6.1.4.1.1966.12.1.21.3 | ScalarsyslogSecondaryHost | read-write | current | If the Device Server cannot communicate with the primary host, then the Device Server will attempt to send system log messages to this preconfigured host; mess… |
| 1.3.6.1.4.1.1966.12.1.21.4 | ScalarsyslogLevel | read-write | current | Choose the event level that triggers a syslog entry: Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug When you select a Level, all the levels th… |
| 1.3.6.1.4.1.1966.12.1.21.5 | ScalarsyslogPrimaryTunnel | read-write | current | The HTTP tunnel associated with the primary host. |
| 1.3.6.1.4.1.1966.12.1.21.6 | ScalarsyslogSecondaryTunnel | read-write | current | The HTTP tunnel associated with the secondary host. |
| 1.3.6.1.4.1.1966.12.1.22 | NodeemailInfo | |||
| 1.3.6.1.4.1.1966.12.1.22.1 | ScalaremailStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.22.2 | ScalaremailActive | read-write | current | Determines whether or not email notification is turned on. Default is Off. |
| 1.3.6.1.4.1.1966.12.1.22.3 | ScalaremailLevel | read-write | current | Choose the event level that triggers an email notification: Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug. You are selecting the lowest no… |
| 1.3.6.1.4.1.1966.12.1.22.4 | ScalaremailTo | read-write | current | An email address or list of email addresses that will receive the email notification. |
| 1.3.6.1.4.1.1966.12.1.22.5 | ScalaremailFrom | read-write | current | This field can contain an email address that might identify the Device Server name or some other value. |
| 1.3.6.1.4.1.1966.12.1.22.6 | ScalaremailSMTPHost | read-write | current | The SMTP host (email server) that will process the email notification request. This can be either a host name defined in the Device Server host table or the SM… |
| 1.3.6.1.4.1.1966.12.1.22.7 | ScalaremailReply | read-write | current | The email address to whom all replies to the email notification should go. |
| 1.3.6.1.4.1.1966.12.1.22.8 | ScalaremailSubject | read-write | current | A text string, which can contain spaces, that will display in the Subject field of the email notification. |
| 1.3.6.1.4.1.1966.12.1.22.9 | ScalaremailSMTPUsername | read-write | current | The username for the SMTP server, if the server requires authentication. |
| 1.3.6.1.4.1.1966.12.1.22.10 | ScalaremailSMTPPassword | read-write | current | The password for the SMTP server, if the server requires authentication. |
| 1.3.6.1.4.1.1966.12.1.22.11 | ScalaremailSMTPEncryption | read-write | current | The encryption method for the SMTP server. |
| 1.3.6.1.4.1.1966.12.1.22.12 | ScalaremailSMTPValidatePeerCertificate | read-write | current | Validate peer SSL/TLS certificate, when SSL or TLS encryption is used. |
| 1.3.6.1.4.1.1966.12.1.22.13 | ScalaremailSMTPTcpPort | read-write | current | The TCP port used for communicating with the SMTP server. For no encryption or TLS encryption, use port 25. For SSL encryption, use port 465. |
| 1.3.6.1.4.1.1966.12.1.22.14 | ScalaremailSMTPDomain | read-write | current | The domain for NTLM authentication with the SMTP server, if applicable. |
| 1.3.6.1.4.1.1966.12.1.22.15 | ScalaremailSMTPHostTunnel | read-write | current | The HTTP tunnel associated with the SMTP host. |
| 1.3.6.1.4.1.1966.12.1.23 | NoderipInfo | |||
| 1.3.6.1.4.1.1966.12.1.23.1 | ScalarripStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.23.2 | ScalarripMode | read-write | current | Enable/disable RIP (Routing Information Protocol) mode for the Ethernet interface with one of the following options: None-Disables RIP over the Ethernet interf… |
| 1.3.6.1.4.1.1966.12.1.23.3 | ScalarripAuthentication | read-write | current | Specify the type of RIP authentication: None-No authentication for RIP. Password-Simple RIP password authentication. MD5-Use MD5 RIP authentication. |
| 1.3.6.1.4.1.1966.12.1.23.4 | TableripKeysInfoTable | not-accessible | current | The RIP authentication keys info table. |
| 1.3.6.1.4.1.1966.12.1.23.4.1 | RowripKeysInfoEntry | not-accessible | current | An entry in the ripKeysInfoTable, each relating to a RIP authentication key. |
| 1.3.6.1.4.1.1966.12.1.23.4.1.1 | ColumnripKeysChainIndex | not-accessible | current | The key chain index for this RIP authentication key. |
| 1.3.6.1.4.1.1966.12.1.23.4.1.2 | ColumnripKeysKeyIndex | not-accessible | current | The key index in the chain for this RIP authentication key. |
| 1.3.6.1.4.1.1966.12.1.23.4.1.3 | ColumnripKeyStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.23.4.1.4 | ColumnripKeyId | read-write | current | The key Id for this RIP authentication key. |
| 1.3.6.1.4.1.1966.12.1.23.4.1.5 | ColumnripKeyStartDate | read-write | current | The starting date for which this RIP authentication key becomes effective. Format dd/mm/yyyy |
| 1.3.6.1.4.1.1966.12.1.23.4.1.6 | ColumnripKeyStartTime | read-write | current | The starting time (local time) for which this RIP authentication key becomes effective. Format hh:mm:ss |
| 1.3.6.1.4.1.1966.12.1.23.4.1.7 | ColumnripKeyEndDate | read-write | current | The end date , after which this RIP authentication key is no longer in effect. |
| 1.3.6.1.4.1.1966.12.1.23.4.1.8 | ColumnripKeyEndTime | read-write | current | The end time (local time), after which this RIP authentication key is no longer in effect. |
| 1.3.6.1.4.1.1966.12.1.24 | NodetimeInfo | |||
| 1.3.6.1.4.1.1966.12.1.24.1 | ScalartimeStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.24.2 | ScalartimeZoneName | read-write | current | The name of the time zone when using standard time. |
| 1.3.6.1.4.1.1966.12.1.24.3 | ScalartimeOffset | read-write | current | The offset of summer time from standard time in minutes. |
| 1.3.6.1.4.1.1966.12.1.24.4 | ScalartimeSummerName | read-write | current | The name of the time zone when using summer time. |
| 1.3.6.1.4.1.1966.12.1.24.5 | ScalartimeSummerOffset | read-write | current | The offset of summer time from standard time in minutes. |
| 1.3.6.1.4.1.1966.12.1.24.6 | ScalartimeSummerMode | read-write | current | You can configure the summer time to take effect: None-No summer time change. Fixed-The summer time change goes into effect at the specified time every year. F… |
| 1.3.6.1.4.1.1966.12.1.24.7 | ScalartimeSummerRecStartMonth | read-write | current | The recurring summer time start month. |
| 1.3.6.1.4.1.1966.12.1.24.8 | ScalartimeSummerRecStartWeek | read-write | current | The recurring summer time start week. |
| 1.3.6.1.4.1.1966.12.1.24.9 | ScalartimeSummerRecStartDay | read-write | current | The recurring summer time start day. |
| 1.3.6.1.4.1.1966.12.1.24.10 | ScalartimeSummerRecStartHour | read-write | current | The recurring summer time start hour. |
| 1.3.6.1.4.1.1966.12.1.24.11 | ScalartimeSummerRecStartMin | read-write | current | The recurring summer time start minute |
| 1.3.6.1.4.1.1966.12.1.24.12 | ScalartimeSummerRecEndMonth | read-write | current | The recurring summer time end month. |
| 1.3.6.1.4.1.1966.12.1.24.13 | ScalartimeSummerRecEndWeek | read-write | current | The recurring summer time end week. |
| 1.3.6.1.4.1.1966.12.1.24.14 | ScalartimeSummerRecEndDay | read-write | current | The recurring summer time end day. |
| 1.3.6.1.4.1.1966.12.1.24.15 | ScalartimeSummerRecEndHour | read-write | current | The recurring summer time end hour |
| 1.3.6.1.4.1.1966.12.1.24.16 | ScalartimeSummerRecEndMin | read-write | current | The recurring summer time end minute |
| 1.3.6.1.4.1.1966.12.1.24.17 | ScalartimeSummerFixStartMonth | read-write | current | The fixed summer time start month |
| 1.3.6.1.4.1.1966.12.1.24.18 | ScalartimeSummerFixStartDay | read-write | current | The fixed summer time start day |
| 1.3.6.1.4.1.1966.12.1.24.19 | ScalartimeSummerFixStartHour | read-write | current | The fixed summer time start hour |
| 1.3.6.1.4.1.1966.12.1.24.20 | ScalartimeSummerFixStartMinute | read-write | current | The fixed summer time start minute |
| 1.3.6.1.4.1.1966.12.1.24.21 | ScalartimeSummerFixEndMonth | read-write | current | The fixed summer time End month |
| 1.3.6.1.4.1.1966.12.1.24.22 | ScalartimeSummerFixEndDay | read-write | current | The fixed summer time End day |
| 1.3.6.1.4.1.1966.12.1.24.23 | ScalartimeSummerFixEndHour | read-write | current | The fixed summer time End hour |
| 1.3.6.1.4.1.1966.12.1.24.24 | ScalartimeSummerFixEndMinute | read-write | current | The fixed summer time End minute |
| 1.3.6.1.4.1.1966.12.1.24.25 | ScalartimeSntpMode | read-write | current | The sntp client mode. Valid modes are Unicast, Multicast or Anycast |
| 1.3.6.1.4.1.1966.12.1.24.26 | ScalartimeSntpVersion | read-write | current | The sntp client version. |
| 1.3.6.1.4.1.1966.12.1.24.27 | ScalartimeSntpHost1 | read-write | current | The first remote SNTP host name that the device server communicates with. |
| 1.3.6.1.4.1.1966.12.1.24.28 | ScalartimeSntpHost2 | read-write | current | The second remote SNTP host name that the device server communicates with. |
| 1.3.6.1.4.1.1966.12.1.24.29 | ScalartimeSntpTunnelName1 | read-write | current | The HTTP tunnel associated with the first host. |
| 1.3.6.1.4.1.1966.12.1.24.30 | ScalartimeSntpTunnelName2 | read-write | current | The HTTP tunnel associated with the second host. |
| 1.3.6.1.4.1.1966.12.1.24.31 | ScalarserverSntpServerAuthentication | read-write | current | Specifies whether the iolan with authenticate the ntp time server. |
| 1.3.6.1.4.1.1966.12.1.24.32 | ScalarserverSntpKeyID | read-write | current | Specifies the key ID to use for host 1 during server authentication. |
| 1.3.6.1.4.1.1966.12.1.24.33 | ScalarserverSntpKeyID2 | read-write | current | Specifies the key ID to use for host 2 during server authentication. |
| 1.3.6.1.4.1.1966.12.1.25 | NodefileInfo | |||
| 1.3.6.1.4.1.1966.12.1.25.1 | ScalarfileStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.25.2 | ScalarfileFirmwareHost | read-write | current | The host name or IP address of the server that contains the firmware file. If you use a host name, it must exist in the Device Server's host table or be resolv… |
| 1.3.6.1.4.1.1966.12.1.25.3 | ScalarfileFirmwareName | read-write | current | The path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the update software for the Device Server tha… |
| 1.3.6.1.4.1.1966.12.1.25.4 | ScalarfileConfigurationHost | read-write | current | The host name or IP address of the server that contains the configuration file. If you use a host name, it must exist in the Device Server's host table or be r… |
| 1.3.6.1.4.1.1966.12.1.25.5 | ScalarfileConfigurationName | read-write | current | The path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the new configuration file for the Device Ser… |
| 1.3.6.1.4.1.1966.12.1.25.6 | ScalarfileMOTDHost | read-write | current | The host name or IP address of the server that contains the MOTD file. If you use a host name, it must exist in the Device Server's host table or be resolved b… |
| 1.3.6.1.4.1.1966.12.1.25.7 | ScalarfileMOTDName | read-write | current | The path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the file that contains a string that is displ… |
| 1.3.6.1.4.1.1966.12.1.25.8 | ScalarfileMOTDTunnel | read-write | current | The HTTP tunnel associated with the MOTD host. |
| 1.3.6.1.4.1.1966.12.1.27 | NodesntpStatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.27.1 | ScalarsntpStatsAddress | read-only | current | sntpStatsAddress |
| 1.3.6.1.4.1.1966.12.1.27.2 | ScalarsntpStatsLastUpdate | read-only | current | sntpStatsLastUpdate |
| 1.3.6.1.4.1.1966.12.1.27.3 | ScalarsntpStatsLeapIndicator | read-only | current | sntpStatsLeapIndicator |
| 1.3.6.1.4.1.1966.12.1.27.4 | ScalarsntpStatsVersion | read-only | current | sntpStatsVersion |
| 1.3.6.1.4.1.1966.12.1.27.5 | ScalarsntpStatsMode | read-only | current | sntpStatsMode |
| 1.3.6.1.4.1.1966.12.1.27.6 | ScalarsntpStatsStratum | read-only | current | sntpStatsStratum |
| 1.3.6.1.4.1.1966.12.1.27.7 | ScalarsntpStatsRefId | read-only | current | sntpStatsRefId |
| 1.3.6.1.4.1.1966.12.1.27.8 | ScalarsntpStatsOffset | read-only | current | sntpStats |
| 1.3.6.1.4.1.1966.12.1.28 | NoderipTableInfo | |||
| 1.3.6.1.4.1.1966.12.1.28.1 | TableripInfoTable | not-accessible | current | The rip info table. |
| 1.3.6.1.4.1.1966.12.1.28.1.1 | RowripInfoEntry | not-accessible | current | An entry in the ripInfoTable, each relating to a rip entry. |
| 1.3.6.1.4.1.1966.12.1.28.1.1.1 | ColumnripIndex | not-accessible | current | The table entry number for this rip. |
| 1.3.6.1.4.1.1966.12.1.28.1.1.2 | ColumnripTableIpAddr | read-only | current | ripIpAddr |
| 1.3.6.1.4.1.1966.12.1.28.1.1.3 | ColumnripTableLastUpdate | read-only | current | Last Update in Seconds |
| 1.3.6.1.4.1.1966.12.1.28.1.1.4 | ColumnripTableVersion | read-only | current | Version |
| 1.3.6.1.4.1.1966.12.1.28.1.1.5 | ColumnripTableAuthType | read-only | current | Authentication Type |
| 1.3.6.1.4.1.1966.12.1.28.1.1.6 | ColumnripTableSequence | read-only | current | Sequence |
| 1.3.6.1.4.1.1966.12.1.28.1.1.7 | ColumnripTableBadPackets | read-only | current | ripTableBadPackets |
| 1.3.6.1.4.1.1966.12.1.28.1.1.8 | ColumnripTableBadRoutes | read-only | current | ripTableBadRoutes |
| 1.3.6.1.4.1.1966.12.1.29 | NodetcpConnStatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.29.1 | TabletcpConnTable | not-accessible | current | tcpConnTable. |
| 1.3.6.1.4.1.1966.12.1.29.1.1 | RowtcpConnEntry | not-accessible | current | An entry in the tcpConnTable |
| 1.3.6.1.4.1.1966.12.1.29.1.1.1 | ColumntcpConnIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.29.1.1.2 | ColumntcpConnLocalAddress | read-only | current | LocalAddress |
| 1.3.6.1.4.1.1966.12.1.29.1.1.3 | ColumntcpConnLocalPort | read-only | current | LocalPort |
| 1.3.6.1.4.1.1966.12.1.29.1.1.4 | ColumntcpConnRemoteAddress | read-only | current | RemoteAddress |
| 1.3.6.1.4.1.1966.12.1.29.1.1.5 | ColumntcpConnRemotePort | read-only | current | RemotePort |
| 1.3.6.1.4.1.1966.12.1.29.1.1.6 | ColumntcpConnTxQueueBytes | read-only | current | tcpConnTxQueueBytes |
| 1.3.6.1.4.1.1966.12.1.29.1.1.7 | ColumntcpConnRxQueueBytes | read-only | current | tcpConnRxQueueBytes |
| 1.3.6.1.4.1.1966.12.1.29.1.1.8 | ColumntcpConnState | read-only | current | State |
| 1.3.6.1.4.1.1966.12.1.30 | NodeudpConnStatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.30.1 | TableudpConnTable | not-accessible | current | udpConnTable |
| 1.3.6.1.4.1.1966.12.1.30.1.1 | RowudpConnEntry | not-accessible | current | An entry in the udpConnTable |
| 1.3.6.1.4.1.1966.12.1.30.1.1.1 | ColumnudpConnIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.30.1.1.2 | ColumnudpConnLocalAddress | read-only | current | LocalAddress |
| 1.3.6.1.4.1.1966.12.1.30.1.1.3 | ColumnudpConnLocalPort | read-only | current | LocalPort |
| 1.3.6.1.4.1.1966.12.1.30.1.1.4 | ColumnudpConnRemoteAddress | read-only | current | RemoteAddress |
| 1.3.6.1.4.1.1966.12.1.30.1.1.5 | ColumnudpConnRemotePort | read-only | current | RemotePort |
| 1.3.6.1.4.1.1966.12.1.30.1.1.6 | ColumnudpConnTxQueueBytes | read-only | current | udpConnTxQueueBytes |
| 1.3.6.1.4.1.1966.12.1.30.1.1.7 | ColumnudpConnRxQueueBytes | read-only | current | udpConnRxQueueBytes |
| 1.3.6.1.4.1.1966.12.1.30.1.1.8 | ColumnudpConnState | read-only | current | State |
| 1.3.6.1.4.1.1966.12.1.31 | Nodeipv6StatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.31.1 | ScalaripV6StatsRxTotalPkts | read-only | current | RxTotal |
| 1.3.6.1.4.1.1966.12.1.31.2 | ScalaripV6StatsRxHdrErrors | read-only | current | RxHdrErrors |
| 1.3.6.1.4.1.1966.12.1.31.3 | ScalaripV6StatsRxTooBigErrors | read-only | current | RxTooBigErrors |
| 1.3.6.1.4.1.1966.12.1.31.4 | ScalaripV6StatsRxNoRoutes | read-only | current | RxNoRoutes |
| 1.3.6.1.4.1.1966.12.1.31.5 | ScalaripV6StatsRxAddrErrors | read-only | current | RxAddrErrors |
| 1.3.6.1.4.1.1966.12.1.31.6 | ScalaripV6StatsRxUnknownProtos | read-only | current | RxUnknownProtos |
| 1.3.6.1.4.1.1966.12.1.31.7 | ScalaripV6StatsRxTruncatedPkts | read-only | current | RxTruncatedPkts |
| 1.3.6.1.4.1.1966.12.1.31.8 | ScalaripV6StatsRxDiscards | read-only | current | RxDiscards |
| 1.3.6.1.4.1.1966.12.1.31.9 | ScalaripV6StatsRxDelivers | read-only | current | RxDelivers |
| 1.3.6.1.4.1.1966.12.1.31.10 | ScalaripV6StatsRxMcastPkts | read-only | current | RxMcastPkts |
| 1.3.6.1.4.1.1966.12.1.31.11 | ScalaripV6StatsTxForwDatagrams | read-only | current | TxForwDatagrams |
| 1.3.6.1.4.1.1966.12.1.31.12 | ScalaripV6StatsTxRequests | read-only | current | TxRequests |
| 1.3.6.1.4.1.1966.12.1.31.13 | ScalaripV6StatsTxDiscards | read-only | current | TxDiscards |
| 1.3.6.1.4.1.1966.12.1.31.14 | ScalaripV6StatsTxNoRoutes | read-only | current | TxNoRoutes |
| 1.3.6.1.4.1.1966.12.1.31.15 | ScalaripV6StatsTxMcastPkts | read-only | current | TxMcastPkts |
| 1.3.6.1.4.1.1966.12.1.31.16 | ScalaripV6StatsReasmTimeout | read-only | current | ReasmTimeout |
| 1.3.6.1.4.1.1966.12.1.31.17 | ScalaripV6StatsReasmReqds | read-only | current | ReasmReqds |
| 1.3.6.1.4.1.1966.12.1.31.18 | ScalaripV6StatsReasmOKs | read-only | current | ReasmOKs |
| 1.3.6.1.4.1.1966.12.1.31.19 | ScalaripV6StatsReasmFails | read-only | current | ReasmFails |
| 1.3.6.1.4.1.1966.12.1.31.20 | ScalaripV6StatsFragOKs | read-only | current | FragOKs |
| 1.3.6.1.4.1.1966.12.1.31.21 | ScalaripV6StatsFragFails | read-only | current | FragFails |
| 1.3.6.1.4.1.1966.12.1.31.22 | ScalaripV6StatsFragCreates | read-only | current | FragCreates |
| 1.3.6.1.4.1.1966.12.1.32 | Nodeicmpv6StatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.32.1 | ScalaricmpV6TxMsgs | read-only | current | TxMsgs |
| 1.3.6.1.4.1.1966.12.1.32.2 | ScalaricmpV6TxErrors | read-only | current | TxErrors |
| 1.3.6.1.4.1.1966.12.1.32.3 | ScalaricmpV6TxDestUnreachs | read-only | current | TxDestUnreachs |
| 1.3.6.1.4.1.1966.12.1.32.4 | ScalaricmpV6TxPktTooBigs | read-only | current | TxPktTooBigs |
| 1.3.6.1.4.1.1966.12.1.32.5 | ScalaricmpV6TxTimeExcds | read-only | current | TxTimeExcds |
| 1.3.6.1.4.1.1966.12.1.32.6 | ScalaricmpV6TxParmProblems | read-only | current | TxParmProblems |
| 1.3.6.1.4.1.1966.12.1.32.7 | ScalaricmpV6TxEchos | read-only | current | TxEchos |
| 1.3.6.1.4.1.1966.12.1.32.8 | ScalaricmpV6TxEchoReplies | read-only | current | TxEchoReplies |
| 1.3.6.1.4.1.1966.12.1.32.9 | ScalaricmpV6TxGroupMembQueries | read-only | current | TxGroupMembQueries |
| 1.3.6.1.4.1.1966.12.1.32.10 | ScalaricmpV6TxGroupMembResponses | read-only | current | TxGroupMembResponses |
| 1.3.6.1.4.1.1966.12.1.32.11 | ScalaricmpV6TxGroupMembReductions | read-only | current | TxGroupMembReductions |
| 1.3.6.1.4.1.1966.12.1.32.12 | ScalaricmpV6TxRouterSolicits | read-only | current | TxRouterSolicits |
| 1.3.6.1.4.1.1966.12.1.32.13 | ScalaricmpV6TxRouterAdvertisements | read-only | current | TxRouterAdvertisements |
| 1.3.6.1.4.1.1966.12.1.32.14 | ScalaricmpV6TxNeighborSolicits | read-only | current | TxNeighborSolicits |
| 1.3.6.1.4.1.1966.12.1.32.15 | ScalaricmpV6TxNeighborAdvertisements | read-only | current | TxNeighborAdvertisements |
| 1.3.6.1.4.1.1966.12.1.32.16 | ScalaricmpV6TxRedirects | read-only | current | TxRedirects |
| 1.3.6.1.4.1.1966.12.1.32.17 | ScalaricmpV6RxMsgs | read-only | current | RxMsgs |
| 1.3.6.1.4.1.1966.12.1.32.18 | ScalaricmpV6RxDestUnreachs | read-only | current | RxDestUnreachs |
| 1.3.6.1.4.1.1966.12.1.32.19 | ScalaricmpV6RxPktTooBigs | read-only | current | RxPktTooBigs |
| 1.3.6.1.4.1.1966.12.1.32.20 | ScalaricmpV6RxTimeExcds | read-only | current | RxTimeExcds |
| 1.3.6.1.4.1.1966.12.1.32.21 | ScalaricmpV6RxParmProblems | read-only | current | RxParmProblems |
| 1.3.6.1.4.1.1966.12.1.32.22 | ScalaricmpV6RxEchoReplies | read-only | current | RxEchoReplies |
| 1.3.6.1.4.1.1966.12.1.32.23 | ScalaricmpV6RxRouterSolicits | read-only | current | RxRouterSolicits |
| 1.3.6.1.4.1.1966.12.1.32.24 | ScalaricmpV6RxNeighborSolicits | read-only | current | RxNeighborSolicits |
| 1.3.6.1.4.1.1966.12.1.32.25 | ScalaricmpV6RxNeighborAdvertisements | read-only | current | RxNeighborAdvertisements |
| 1.3.6.1.4.1.1966.12.1.32.26 | ScalaricmpV6RxRedirects | read-only | current | RxRedirects |
| 1.3.6.1.4.1.1966.12.1.32.27 | ScalaricmpV6RxGroupMembResponses | read-only | current | RxGroupMembResponses |
| 1.3.6.1.4.1.1966.12.1.32.28 | ScalaricmpV6RxGroupMembReductions | read-only | current | RxGroupMembReductions |
| 1.3.6.1.4.1.1966.12.1.33 | Nodeudpv6StatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.33.1 | ScalarudpV6RxDatagrams | read-only | current | udpV6RxDatagrams |
| 1.3.6.1.4.1.1966.12.1.33.2 | ScalarudpV6noPorts | read-only | current | udpV6noPorts |
| 1.3.6.1.4.1.1966.12.1.33.3 | ScalarudpV6RxErrors | read-only | current | udpV6RxErrors |
| 1.3.6.1.4.1.1966.12.1.33.4 | ScalarudpV6TxDatagrams | read-only | current | udpV6TxDatagrams |
| 1.3.6.1.4.1.1966.12.1.34 | NodetcpConnv6StatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.34.1 | TabletcpConnv6Table | not-accessible | current | The rip info table. |
| 1.3.6.1.4.1.1966.12.1.34.1.1 | RowtcpConnv6Entry | not-accessible | current | An entry in the tcpConnv6Table |
| 1.3.6.1.4.1.1966.12.1.34.1.1.1 | ColumntcpConnv6Index | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.34.1.1.2 | ColumntcpConnv6LocalAddress | read-only | current | LocalAddress |
| 1.3.6.1.4.1.1966.12.1.34.1.1.3 | ColumntcpConnv6LocalPort | read-only | current | LocalPort |
| 1.3.6.1.4.1.1966.12.1.34.1.1.4 | ColumntcpConnv6RemoteAddress | read-only | current | RemoteAddress |
| 1.3.6.1.4.1.1966.12.1.34.1.1.5 | ColumntcpConnv6RemotePort | read-only | current | RemotePort |
| 1.3.6.1.4.1.1966.12.1.34.1.1.6 | ColumntcpConnv6TxQueueBytes | read-only | current | tcpConnv6TxQueueBytes |
| 1.3.6.1.4.1.1966.12.1.34.1.1.7 | ColumntcpConnv6RxQueueBytes | read-only | current | tcpConnv6RxQueueBytes |
| 1.3.6.1.4.1.1966.12.1.34.1.1.8 | ColumntcpConnv6State | read-only | current | State |
| 1.3.6.1.4.1.1966.12.1.35 | NodeudpConnv6StatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.35.1 | TableudpConnv6Table | not-accessible | current | udpConnv6Table |
| 1.3.6.1.4.1.1966.12.1.35.1.1 | RowudpConnv6Entry | not-accessible | current | An entry in the udpConnv6Table |
| 1.3.6.1.4.1.1966.12.1.35.1.1.1 | ColumnudpConnv6Index | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.35.1.1.2 | ColumnudpConnv6LocalAddress | read-only | current | LocalAddress |
| 1.3.6.1.4.1.1966.12.1.35.1.1.3 | ColumnudpConnv6LocalPort | read-only | current | LocalPort |
| 1.3.6.1.4.1.1966.12.1.35.1.1.4 | ColumnudpConnv6RemoteAddress | read-only | current | RemoteAddress |
| 1.3.6.1.4.1.1966.12.1.35.1.1.5 | ColumnudpConnv6RemotePort | read-only | current | RemotePort |
| 1.3.6.1.4.1.1966.12.1.35.1.1.6 | ColumnudpConnv6TxQueueBytes | read-only | current | TxQueue |
| 1.3.6.1.4.1.1966.12.1.35.1.1.7 | ColumnudpConnv6RxQueueBytes | read-only | current | RxQueue |
| 1.3.6.1.4.1.1966.12.1.35.1.1.8 | ColumnudpConnv6State | read-only | current | State |
| 1.3.6.1.4.1.1966.12.1.36 | Noderoutev6Info | |||
| 1.3.6.1.4.1.1966.12.1.36.1 | Tableroutev6Table | not-accessible | current | The route IPv6 info table. |
| 1.3.6.1.4.1.1966.12.1.36.1.1 | Rowroutev6Entry | not-accessible | current | An entry in the route IPv6 Table |
| 1.3.6.1.4.1.1966.12.1.36.1.1.1 | Columnroutev6Index | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.36.1.1.2 | Columnroutev6Destination | read-only | current | Destination |
| 1.3.6.1.4.1.1966.12.1.36.1.1.3 | Columnroutev6PrefixBits | read-only | current | PrefixBits |
| 1.3.6.1.4.1.1966.12.1.36.1.1.4 | Columnroutev6Gateway | read-only | current | Gateway |
| 1.3.6.1.4.1.1966.12.1.36.1.1.5 | Columnroutev6Metric | read-only | current | Metric |
| 1.3.6.1.4.1.1966.12.1.36.1.1.6 | Columnroutev6Flags | read-only | current | Flags |
| 1.3.6.1.4.1.1966.12.1.36.1.1.7 | Columnroutev6Interface | read-only | current | Interface |
| 1.3.6.1.4.1.1966.12.1.37 | Noderipv6TableInfo | |||
| 1.3.6.1.4.1.1966.12.1.37.1 | Tableripv6InfoTable | not-accessible | current | The ripv6 info table. |
| 1.3.6.1.4.1.1966.12.1.37.1.1 | Rowripv6InfoEntry | not-accessible | current | An entry in the ripv6InfoTable, each relating to a ripv6 entry. |
| 1.3.6.1.4.1.1966.12.1.37.1.1.1 | Columnripv6Index | not-accessible | current | The table entry number for this ripv6. |
| 1.3.6.1.4.1.1966.12.1.37.1.1.2 | Columnripv6TableIpAddr | read-only | current | ripv6IpAddr |
| 1.3.6.1.4.1.1966.12.1.37.1.1.3 | Columnripv6TableLastUpdate | read-only | current | Last Update in Seconds |
| 1.3.6.1.4.1.1966.12.1.37.1.1.4 | Columnripv6TableBadPackets | read-only | current | Last Update in Seconds |
| 1.3.6.1.4.1.1966.12.1.37.1.1.5 | Columnripv6TableBadRoutes | read-only | current | Last Update in Seconds |
| 1.3.6.1.4.1.1966.12.1.38 | Nodeinterfacev6Info | |||
| 1.3.6.1.4.1.1966.12.1.38.1 | Tableinterfacev6InfoTable | not-accessible | current | The interface IPv6 info table. |
| 1.3.6.1.4.1.1966.12.1.38.1.1 | Rowinterfacev6InfoEntry | not-accessible | current | An entry in the interface IPv6 table |
| 1.3.6.1.4.1.1966.12.1.38.1.1.1 | Columninterfacev6Index | not-accessible | current | interfacev6Index |
| 1.3.6.1.4.1.1966.12.1.38.1.1.2 | Columninterfacev6Name | read-only | current | interfacev6Name |
| 1.3.6.1.4.1.1966.12.1.38.1.1.3 | Columninterfacev6Address | read-only | current | interfacev6Address |
| 1.3.6.1.4.1.1966.12.1.38.1.1.4 | Columninterfacev6PrefixBits | read-only | current | interfacev6PrefixBits |
| 1.3.6.1.4.1.1966.12.1.38.1.1.5 | Columninterfacev6Scope | read-only | current | interfacev6Scope |
| 1.3.6.1.4.1.1966.12.1.39 | NodesslInfo | |||
| 1.3.6.1.4.1.1966.12.1.39.1 | ScalarsslServerStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.39.2 | ScalarsslVersion | read-write | current | Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it wil… |
| 1.3.6.1.4.1.1966.12.1.39.3 | ScalarsslType | read-write | current | Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client. |
| 1.3.6.1.4.1.1966.12.1.39.4 | ScalarsslVerifyPeerCertificate | read-write | current | Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl… |
| 1.3.6.1.4.1.1966.12.1.39.5 | ScalarsslCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.39.6 | ScalarsslStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.39.7 | ScalarsslLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.39.8 | ScalarsslOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.39.9 | ScalarsslOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.39.10 | ScalarsslCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.39.11 | ScalarsslEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.39.12 | TablesslCipherTable | not-accessible | current | SSL CIpher. |
| 1.3.6.1.4.1.1966.12.1.39.12.1 | RowsslCipherEntry | not-accessible | current | An entry in the sslCipherTable, each relating to a cipher entry. |
| 1.3.6.1.4.1.1966.12.1.39.12.1.1 | ColumnsslCipherPriority | not-accessible | current | The cipher priority. 1- highest 5 - lowest. |
| 1.3.6.1.4.1.1966.12.1.39.12.1.2 | ColumnsslCipherStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.39.12.1.3 | ColumnsslCipherEncryption | read-write | current | SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any. |
| 1.3.6.1.4.1.1966.12.1.39.12.1.4 | ColumnsslCipherKeySizeMin | read-write | current | The minimum key size value that will be used for the specified encryption type. The default is 40. |
| 1.3.6.1.4.1.1966.12.1.39.12.1.5 | ColumnsslCipherKeySizeMax | read-write | current | The maximum key size value that will be used for the specified encryption type. The default is 256. |
| 1.3.6.1.4.1.1966.12.1.39.12.1.6 | ColumnsslCipherKeyExchange | read-write | current | The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS… |
| 1.3.6.1.4.1.1966.12.1.39.12.1.7 | ColumnsslCipherHMAC | read-write | current | Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any. |
| 1.3.6.1.4.1.1966.12.1.40 | NodeconsoleInfo | |||
| 1.3.6.1.4.1.1966.12.1.40.1 | ScalarconsoleStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.40.2 | ScalarconsoleSpeed | read-write | current | Specifies the baud rate of the console port; keep in mind that speed is affected by the length of the cable. |
| 1.3.6.1.4.1.1966.12.1.40.3 | ScalarconsoleFlowControl | read-write | current | Defines whether the data flow is handled by the software (Soft), hardware (Hard) or None. |
| 1.3.6.1.4.1.1966.12.1.40.4 | ScalarconsoleMediaType | read-write | current | Defines whether the USB or RJ45 port is used for console input when the device is started. |
| 1.3.6.1.4.1.1966.12.1.40.5 | ScalarconsoleUsbTimeout | read-write | current | Defines a inactivity timeout for the USB port. If this expires the console function is switched to the RJ45. Actual time out values are 1-240 minutes plus 0 in… |
| 1.3.6.1.4.1.1966.12.1.41 | NodeethStatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.41.1 | TableethStatsInfoTable | not-accessible | current | The Ethernet statistics table. |
| 1.3.6.1.4.1.1966.12.1.41.1.1 | RowethStatsInfoEntry | not-accessible | current | An entry in the Ethernet statistics table, each relating to an Ethernet interface. |
| 1.3.6.1.4.1.1966.12.1.41.1.1.1 | ColumnethStatsIndex | not-accessible | current | The Ethernet interface number. |
| 1.3.6.1.4.1.1966.12.1.41.1.1.2 | ColumnethStatsName | read-only | current | Displays Ethernet statistics. |
| 1.3.6.1.4.1.1966.12.1.41.1.1.3 | ColumnethStatsMacAddress | read-only | current | Displays the MAC address. |
| 1.3.6.1.4.1.1966.12.1.41.1.1.4 | ColumnethStatsStatus | read-only | current | Displays the Ethernet status: 1 is down and 2 is up. |
| 1.3.6.1.4.1.1966.12.1.41.1.1.5 | ColumnethStatsBroadcast | read-only | current | ethStatsBroadcast |
| 1.3.6.1.4.1.1966.12.1.41.1.1.6 | ColumnethStatsDebug | read-only | current | ethStatsDebug |
| 1.3.6.1.4.1.1966.12.1.41.1.1.7 | ColumnethStatsLoopback | read-only | current | ethStatsLoopback |
| 1.3.6.1.4.1.1966.12.1.41.1.1.8 | ColumnethStatsPointtoPoint | read-only | current | ethStatsPointtoPoint |
| 1.3.6.1.4.1.1966.12.1.41.1.1.9 | ColumnethStatsNoTrailers | read-only | current | ethStatsNoTrailers |
| 1.3.6.1.4.1.1966.12.1.41.1.1.10 | ColumnethStatsRunning | read-only | current | ethStatsRunning |
| 1.3.6.1.4.1.1966.12.1.41.1.1.11 | ColumnethStatsNoArp | read-only | current | ethStatsNoArp |
| 1.3.6.1.4.1.1966.12.1.41.1.1.12 | ColumnethStatsPromiscuous | read-only | current | ethStatsPromiscuous |
| 1.3.6.1.4.1.1966.12.1.41.1.1.13 | ColumnethStatsRxMulticast | read-only | current | ethStatsRxMulticast |
| 1.3.6.1.4.1.1966.12.1.41.1.1.14 | ColumnethStatsMasterLoadBalancer | read-only | current | ethStatsMasterLoadBalancer |
| 1.3.6.1.4.1.1966.12.1.41.1.1.15 | ColumnethStatsSlaveLoadBalancer | read-only | current | ethStatsSlaveLoadBalancer |
| 1.3.6.1.4.1.1966.12.1.41.1.1.16 | ColumnethStatsMulticast | read-only | current | ethStatsMulticast |
| 1.3.6.1.4.1.1966.12.1.41.1.1.17 | ColumnethStatsSetMedia | read-only | current | ethStatsSetMedia |
| 1.3.6.1.4.1.1966.12.1.41.1.1.18 | ColumnethStatsAutoMedia | read-only | current | ethStatsAutoMedia |
| 1.3.6.1.4.1.1966.12.1.41.1.1.19 | ColumnethStatsDynamic | read-only | current | ethStatsDynamic |
| 1.3.6.1.4.1.1966.12.1.41.1.1.20 | ColumnethStatsLocalAddress | read-only | current | ethStatsLocalAddress |
| 1.3.6.1.4.1.1966.12.1.41.1.1.21 | ColumnethStatsSubnetMask | read-only | current | ethStatsSubnetMask |
| 1.3.6.1.4.1.1966.12.1.41.1.1.22 | ColumnethStatsBroadcastAddress | read-only | current | ethStatsBroadcastAddress |
| 1.3.6.1.4.1.1966.12.1.41.1.1.23 | ColumnethStatsMtu | read-only | current | ethStatsMtu |
| 1.3.6.1.4.1.1966.12.1.41.1.1.24 | ColumnethStatsTxQLen | read-only | current | ethStatsTxQLen |
| 1.3.6.1.4.1.1966.12.1.41.1.1.25 | ColumnethStatsRxBytes | read-only | current | ethStatsRxBytes |
| 1.3.6.1.4.1.1966.12.1.41.1.1.26 | ColumnethStatsTxBytes | read-only | current | ethStatsTxBytes |
| 1.3.6.1.4.1.1966.12.1.41.1.1.27 | ColumnethStatsRxPackets | read-only | current | ethStatsRxPackets |
| 1.3.6.1.4.1.1966.12.1.41.1.1.28 | ColumnethStatsTxPackets | read-only | current | ethStatsTxPackets |
| 1.3.6.1.4.1.1966.12.1.41.1.1.29 | ColumnethStatsRxErrors | read-only | current | ethStatsRxErrors |
| 1.3.6.1.4.1.1966.12.1.41.1.1.30 | ColumnethStatsTxPktErrors | read-only | current | ethStatsTxPktErrors |
| 1.3.6.1.4.1.1966.12.1.41.1.1.31 | ColumnethStatsRxDroppedPkts | read-only | current | ethStatsRxDroppedPkts |
| 1.3.6.1.4.1.1966.12.1.41.1.1.32 | ColumnethStatsTxDroppedPkts | read-only | current | ethStatsTxDroppedPkts |
| 1.3.6.1.4.1.1966.12.1.41.1.1.33 | ColumnethStatsRxOverruns | read-only | current | ethStatsRxOverruns |
| 1.3.6.1.4.1.1966.12.1.41.1.1.34 | ColumnethStatsTxOverruns | read-only | current | ethStatsTxOverruns |
| 1.3.6.1.4.1.1966.12.1.41.1.1.35 | ColumnethStatsRxFrameErrs | read-only | current | ethStatsRxFrameErrs |
| 1.3.6.1.4.1.1966.12.1.41.1.1.36 | ColumnethStatsTxCarrierErrs | read-only | current | ethStatsTxCarrierErrs |
| 1.3.6.1.4.1.1966.12.1.41.1.1.37 | ColumnethStatsCollisions | read-only | current | ethStatsCollisions |
| 1.3.6.1.4.1.1966.12.1.42 | NodemodbusGatewayInfo | |||
| 1.3.6.1.4.1.1966.12.1.42.1 | ScalarmodbusGatewayStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.42.2 | ScalarmodbusGatewayConnIdleTimeout | read-write | current | Connection/Idle timeout: 0: never close; 1->300. |
| 1.3.6.1.4.1.1966.12.1.42.3 | ScalarmodbusGatewayException | read-write | current | Enable/disable modbus exception. |
| 1.3.6.1.4.1.1966.12.1.42.4 | ScalarmodbusGatewayCharacterTimeout | read-write | current | Character timeout. |
| 1.3.6.1.4.1.1966.12.1.42.5 | ScalarmodbusGatewayMessageTimeout | read-write | current | Message timeout. |
| 1.3.6.1.4.1.1966.12.1.42.6 | ScalarmodbusGatewayPortNumber | read-write | current | Remote master transport layer (TCP/UDP) port number |
| 1.3.6.1.4.1.1966.12.1.42.7 | ScalarmodbusGatewayUIDAddressMode | read-write | current | Slave UID address mode. |
| 1.3.6.1.4.1.1966.12.1.42.8 | ScalarmodbusGatewayRemappedUID | read-write | current | Remapped UID under Remapped address mode |
| 1.3.6.1.4.1.1966.12.1.42.9 | ScalarmodbusGatewayBroadcast | read-write | current | Enable/disable propagate Modbus TCP broadcast requests. |
| 1.3.6.1.4.1.1966.12.1.42.10 | ScalarmodbusGatewayNextRequestDelay | read-write | current | Delay to allow serial slaves to re-enable receivers before issuing next master request. |
| 1.3.6.1.4.1.1966.12.1.42.11 | ScalarmodbusGatewayQueuing | read-write | current | Enable/disable request queuing. |
| 1.3.6.1.4.1.1966.12.1.42.12 | ScalarmodbusGatewaySSL | read-write | current | Enable/disable modbus slave SSL. |
| 1.3.6.1.4.1.1966.12.1.42.13 | ScalarmodbusGatewayIPAliasing | read-write | current | Enable/disable modbus slave IP Aliasing. |
| 1.3.6.1.4.1.1966.12.1.43 | NodemodbusStatsInfo | |||
| 1.3.6.1.4.1.1966.12.1.43.1 | TablemodbusSlaveTCPStatsTable | not-accessible | current | Modbus TCP Slave Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.1.1 | RowmodbusSlaveTCPStatsEntry | not-accessible | current | An entry in the Modbus/TCP Slave statistics table, each relating to a serial port. |
| 1.3.6.1.4.1.1966.12.1.43.1.1.1 | ColumnmodbusSlaveTCPStatsPortIndex | not-accessible | current | modbusSlaveTCPStatsPortIndex |
| 1.3.6.1.4.1.1966.12.1.43.1.1.2 | ColumnmodbusSlaveTCPStatsSerialMode | read-only | current | Modbus serial device's mode: 0: RTU; 1: ASCII. |
| 1.3.6.1.4.1.1966.12.1.43.1.1.3 | ColumnmodbusSlaveTCPStatsSerialFrameErrors | read-only | current | Modbus serial port frame errors |
| 1.3.6.1.4.1.1966.12.1.43.2 | TablemodbusMasterTCPStatsTable | not-accessible | current | Modbus TCP Master Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.2.1 | RowmodbusMasterTCPStatsEntry | not-accessible | current | An entry in the Modbus/TCP Master statistics table, each relating to a serial port. |
| 1.3.6.1.4.1.1966.12.1.43.2.1.1 | ColumnmodbusMasterTCPStatsPortIndex | not-accessible | current | modbusMasterTCPStatsPortIndex |
| 1.3.6.1.4.1.1966.12.1.43.2.1.2 | ColumnmodbusMasterTCPStatsSerialMode | read-only | current | Modbus serial device's mode: 0: RTU; 1: ASCII. |
| 1.3.6.1.4.1.1966.12.1.43.2.1.3 | ColumnmodbusMasterTCPStatsSerialFrameErrors | read-only | current | Modbus serial port frame errors |
| 1.3.6.1.4.1.1966.12.1.43.3 | TablemodbusSlaveUDPStatsTable | not-accessible | current | Modbus UDP Slave Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.3.1 | RowmodbusSlaveUDPStatsEntry | not-accessible | current | An entry in the Modbus/UDP Slave statistics table, each relating to a serial port. |
| 1.3.6.1.4.1.1966.12.1.43.3.1.1 | ColumnmodbusSlaveUDPStatsPortIndex | not-accessible | current | modbusSlaveUDPStatsPortIndex |
| 1.3.6.1.4.1.1966.12.1.43.3.1.2 | ColumnmodbusSlaveUDPStatsSerialMode | read-only | current | Modbus serial device's mode: 0: RTU; 1: ASCII. |
| 1.3.6.1.4.1.1966.12.1.43.3.1.3 | ColumnmodbusSlaveUDPStatsSerialFrameErrors | read-only | current | Modbus serial port frame errors |
| 1.3.6.1.4.1.1966.12.1.43.4 | TablemodbusMasterUDPStatsTable | not-accessible | current | Modbus UDP Master Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.4.1 | RowmodbusMasterUDPStatsEntry | not-accessible | current | An entry in the Modbus/UDP Master statistics table, each relating to a serial port. |
| 1.3.6.1.4.1.1966.12.1.43.4.1.1 | ColumnmodbusMasterUDPStatsPortIndex | not-accessible | current | modbusMasterUDPStatsPortIndex |
| 1.3.6.1.4.1.1966.12.1.43.4.1.2 | ColumnmodbusMasterUDPStatsSerialMode | read-only | current | Modbus serial device's mode: 0: RTU; 1: ASCII. |
| 1.3.6.1.4.1.1966.12.1.43.4.1.3 | ColumnmodbusMasterUDPStatsSerialFrameErrors | read-only | current | Modbus serial port frame errors |
| 1.3.6.1.4.1.1966.12.1.43.5 | NodeioModbusSlaveStats | |||
| 1.3.6.1.4.1.1966.12.1.43.5.1 | ScalarioModbusSlaveStatsServiceMode | read-only | current | Indicates whether I/O Modbus service is active |
| 1.3.6.1.4.1.1966.12.1.43.5.2 | ScalarioModbusSlaveStatsUid | read-only | current | I/O Modbus Slave UID |
| 1.3.6.1.4.1.1966.12.1.43.5.3 | ScalarioModbusSlaveStatsCommands | read-only | current | I/O Modbus Slave Commands |
| 1.3.6.1.4.1.1966.12.1.43.5.4 | ScalarioModbusSlaveStatsResponses | read-only | current | I/O Modbus Slave Responses |
| 1.3.6.1.4.1.1966.12.1.43.5.5 | ScalarioModbusSlaveStatsExceptions | read-only | current | I/O Modbus Slave Exceptions |
| 1.3.6.1.4.1.1966.12.1.43.6 | TablemodbusSlaveTCPStatsGatewayTable | not-accessible | current | Modbus TCP Slave Gateway Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.6.1 | RowmodbusSlaveTCPStatsGatewayEntry | not-accessible | current | An entry in the modbusStatsGatewayTable. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.1 | ColumnmodbusSlaveTCPStatsGatewayPortIndex | not-accessible | current | The port number index |
| 1.3.6.1.4.1.1966.12.1.43.6.1.2 | ColumnmodbusSlaveTCPStatsGatewayUIDIndex | not-accessible | current | The UID index |
| 1.3.6.1.4.1.1966.12.1.43.6.1.3 | ColumnmodbusSlaveTCPStatsGatewayRemoteIP | read-only | current | The remote slave/master IP address. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.4 | ColumnmodbusSlaveTCPStatsGatewayUID | read-only | current | The UID. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.5 | ColumnmodbusSlaveTCPStatsGatewayRemotePortNumber | read-only | current | The remote TCP/UDP port number. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.6 | ColumnmodbusSlaveTCPStatsGatewayCommands | read-only | current | The commands count. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.7 | ColumnmodbusSlaveTCPStatsGatewayResponses | read-only | current | The response count. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.8 | ColumnmodbusSlaveTCPStatsGatewayExceptions | read-only | current | the exceptions count. |
| 1.3.6.1.4.1.1966.12.1.43.6.1.9 | ColumnmodbusSlaveTCPStatsGatewayFrameErrors | read-only | current | The frame errors count. |
| 1.3.6.1.4.1.1966.12.1.43.7 | TablemodbusMasterTCPStatsGatewayTable | not-accessible | current | Modbus Master TCP Gateway Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.7.1 | RowmodbusMasterTCPStatsGatewayEntry | not-accessible | current | An entry in the modbusStatsGatewayTable. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.1 | ColumnmodbusMasterTCPStatsGatewayPortIndex | not-accessible | current | The port number index |
| 1.3.6.1.4.1.1966.12.1.43.7.1.2 | ColumnmodbusMasterTCPStatsGatewayUIDIndex | not-accessible | current | The UID index |
| 1.3.6.1.4.1.1966.12.1.43.7.1.3 | ColumnmodbusMasterTCPStatsGatewayRemoteIP | read-only | current | The remote slave/master IP address. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.4 | ColumnmodbusMasterTCPStatsGatewayUID | read-only | current | The UID. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.5 | ColumnmodbusMasterTCPStatsGatewayRemotePortNumber | read-only | current | the remote TCP/UDP port number. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.6 | ColumnmodbusMasterTCPStatsGatewayCommands | read-only | current | The commands count. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.7 | ColumnmodbusMasterTCPStatsGatewayResponses | read-only | current | The response count. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.8 | ColumnmodbusMasterTCPStatsGatewayExceptions | read-only | current | The exceptions count. |
| 1.3.6.1.4.1.1966.12.1.43.7.1.9 | ColumnmodbusMasterTCPStatsGatewayFrameErrors | read-only | current | The frame errors count. |
| 1.3.6.1.4.1.1966.12.1.43.8 | TablemodbusSlaveUDPStatsGatewayTable | not-accessible | current | Modbus UDP Slave Gateway Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.8.1 | RowmodbusSlaveUDPStatsGatewayEntry | not-accessible | current | An entry in the modbusStatsGatewayTable. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.1 | ColumnmodbusSlaveUDPStatsGatewayPortIndex | not-accessible | current | The port number index |
| 1.3.6.1.4.1.1966.12.1.43.8.1.2 | ColumnmodbusSlaveUDPStatsGatewayUIDIndex | not-accessible | current | The UID index |
| 1.3.6.1.4.1.1966.12.1.43.8.1.3 | ColumnmodbusSlaveUDPStatsGatewayRemoteIP | read-only | current | The remote slave/master IP address. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.4 | ColumnmodbusSlaveUDPStatsGatewayUID | read-only | current | The UID. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.5 | ColumnmodbusSlaveUDPStatsGatewayRemotePortNumber | read-only | current | the remote TCP/UDP port number. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.6 | ColumnmodbusSlaveUDPStatsGatewayCommands | read-only | current | The commands count. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.7 | ColumnmodbusSlaveUDPStatsGatewayResponses | read-only | current | The response count. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.8 | ColumnmodbusSlaveUDPStatsGatewayExceptions | read-only | current | The exceptions count. |
| 1.3.6.1.4.1.1966.12.1.43.8.1.9 | ColumnmodbusSlaveUDPStatsGatewayFrameErrors | read-only | current | The frame errors count. |
| 1.3.6.1.4.1.1966.12.1.43.9 | TablemodbusMasterUDPStatsGatewayTable | not-accessible | current | Modbus UDP Master Gateway Statistics Table. |
| 1.3.6.1.4.1.1966.12.1.43.9.1 | RowmodbusMasterUDPStatsGatewayEntry | not-accessible | current | An entry in the modbusStatsGatewayTable. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.1 | ColumnmodbusMasterUDPStatsGatewayPortIndex | not-accessible | current | The port number index |
| 1.3.6.1.4.1.1966.12.1.43.9.1.2 | ColumnmodbusMasterUDPStatsGatewayUIDIndex | not-accessible | current | The UID index |
| 1.3.6.1.4.1.1966.12.1.43.9.1.3 | ColumnmodbusMasterUDPStatsGatewayRemoteIP | read-only | current | The remote slave/master IP address. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.4 | ColumnmodbusMasterUDPStatsGatewayUID | read-only | current | The UID. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.5 | ColumnmodbusMasterUDPStatsGatewayRemotePortNumber | read-only | current | The remote TCP/UDP port number. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.6 | ColumnmodbusMasterUDPStatsGatewayCommands | read-only | current | The commands count. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.7 | ColumnmodbusMasterUDPStatsGatewayResponses | read-only | current | The response count. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.8 | ColumnmodbusMasterUDPStatsGatewayExceptions | read-only | current | The exceptions count. |
| 1.3.6.1.4.1.1966.12.1.43.9.1.9 | ColumnmodbusMasterUDPStatsGatewayFrameErrors | read-only | current | The frame errors count. |
| 1.3.6.1.4.1.1966.12.1.44 | NodecustomAppServerInfo | |||
| 1.3.6.1.4.1.1966.12.1.44.1 | ScalarcustomAppServerStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.44.2 | ScalarcustomAppServerCommand | read-write | current | The command line for custom application. |
| 1.3.6.1.4.1.1966.12.1.45 | NodeioInfo | |||
| 1.3.6.1.4.1.1966.12.1.45.1 | NodeioGlobalCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.1.1 | ScalarioGlobalCfgStatus | read-write | current | When read, this object indicates the state of all the configuration objects in the ioGlobalCfg group (including all sub-groups and tables). Read values: 'confi… |
| 1.3.6.1.4.1.1966.12.1.45.1.2 | ScalarioTemperatureScale | read-write | current | The temperature scale to be used when displaying thermocouple or RTD values |
| 1.3.6.1.4.1.1966.12.1.45.1.3 | NodeioFailsafeCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.1.3.1 | ScalarioFailsafeEnable | read-write | current | Enable/disable I/O failsafe timer |
| 1.3.6.1.4.1.1966.12.1.45.1.3.2 | ScalarioFailsafeTimeout | read-write | current | I/O failsafe timeout, in seconds |
| 1.3.6.1.4.1.1966.12.1.45.1.4 | NodeioModbusCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.1.4.1 | ScalarioModbusEnable | read-write | current | Enable/disable I/O Modbus service |
| 1.3.6.1.4.1.1966.12.1.45.1.4.2 | ScalarioModbusUid | read-write | current | I/O Modbus UID |
| 1.3.6.1.4.1.1966.12.1.45.1.5 | NodeioUdpCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.1.5.1 | ScalarioUdpEnable | read-write | current | Enable/disable I/O UDP service |
| 1.3.6.1.4.1.1966.12.1.45.1.5.2 | ScalarioUdpBroadcastInterval | read-write | current | I/O UDP broadcast interval, in seconds |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3 | TableioUdpTable | not-accessible | current | Port UDP Table. |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1 | RowioUdpEntry | not-accessible | current | An entry in the ioUdpEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.1 | ColumnioUdpEntryIndex | not-accessible | current | ioUdpNumber |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.2 | ColumnioUdpEntryEnable | read-write | current | Enable/disable this UDP entry |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.3 | ColumnioUdpEntryStartAddress | read-write | current | The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the Device Server send messages to |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.4 | ColumnioUdpEntryEndAddress | read-write | current | The last host IP address in the range of IP addresses (for IPv4, not required for IPv6) that the Device Server will send messages to. |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.5 | ColumnioUdpEntryPort | read-write | current | The port that the Device Server will use to relay messages to servers/hosts. |
| 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.6 | ColumnioUdpEntryTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.45.1.6 | NodeioTrueportCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.1.6.1 | ScalarioTrueportEnable | read-write | current | Enable/disable I/O TruePort service |
| 1.3.6.1.4.1.1966.12.1.45.1.6.2 | ScalarioTrueportTcpListenPort | read-write | current | I/O TruePort TCP Listening Port |
| 1.3.6.1.4.1.1966.12.1.45.1.6.3 | ScalarioTrueportSslEnable | read-write | current | Enable/disable I/O TruePort SSL |
| 1.3.6.1.4.1.1966.12.1.45.2 | NodeioChannelInfo | |||
| 1.3.6.1.4.1.1966.12.1.45.2.1 | NodeioChannelCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.2.1.1 | NodeioAnalogCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1 | TableioAnalogCfgTable | not-accessible | current | ioAnalogCfgTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1 | RowioAnalogCfgEntry | not-accessible | current | An entry in the ioAnalogCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.1 | ColumnioAnalogChannelIndex | not-accessible | current | I/O analog channel resource index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.2 | ColumnioAnalogCfgStatus | read-write | current | NOTE: This object also applies to the corresponding rows in ioAnalogAlarmCfgTable. e.g. If changes are submitted to row 1 of this table (i.e. channel 1), then … |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.3 | ColumnioAnalogCfgEnable | read-write | current | Enable/disable this analog I/O resource |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.4 | ColumnioAnalogCfgDescription | read-write | current | Description for the I/O resource |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.5 | ColumnioAnalogCfgType | read-write | current | Analog I/O resource type. For current and voltage types, please note that the corresponding hardware jumpers must be set accordingly. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.6 | ColumnioAnalogCfgRtdRange | read-write | current | Range for RTD analog I/O |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.7 | ColumnioAnalogCfgThermRange | read-write | current | Range for thermocouple analog I/O |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.8 | ColumnioAnalogCfgCurrentRange | read-write | current | Range for current-measuring analog I/O |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.9 | ColumnioAnalogCfgVoltageRange | read-write | current | Range for voltage-measuring analog I/O |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.10 | ColumnioAnalogCfgAlarmTrigger | read-write | current | Analog I/O alarm trigger type |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.11 | ColumnioAnalogCfgAlarmClearMode | read-write | current | Analog I/O alarm clear mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2 | TableioAnalogAlarmCfgTable | not-accessible | current | ioAnalogAlarmCfgTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1 | RowioAnalogAlarmCfgEntry | not-accessible | current | An entry in the ioAnalogAlarmCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.1 | ColumnioAnalogAlarmCfgChannelIndex | not-accessible | current | Channel Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.2 | ColumnioAnalogAlarmCfgEntryIndex | not-accessible | current | Entry Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.3 | ColumnioAnalogCfgAlarmEnable | read-write | current | Enable/disable I/O analog alarm entry |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.4 | ColumnioAnalogCfgAlarmTriggerLevel | read-write | current | Trigger level for I/O analog alarm (floating point value) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.5 | ColumnioAnalogCfgAlarmClearLevel | read-write | current | Clear level for non-latching I/O analog alarm (floating point value) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.6 | ColumnioAnalogCfgAlarmEmail | read-write | current | Enable/disable email notification on triggered analog alarm |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.7 | ColumnioAnalogCfgAlarmSyslog | read-write | current | Enable/disable syslog notification on triggered analog alarm |
| 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.8 | ColumnioAnalogCfgAlarmSNMP | read-write | current | Enable/disable SNMP trap notification on triggered analog alarm |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2 | NodeioDigitalCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1 | TableioDigitalCfgTable | not-accessible | current | ioDigitalCfgTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1 | RowioDigitalCfgEntry | not-accessible | current | An entry in the ioDigitalCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.1 | ColumnioDigitalChannelIndex | not-accessible | current | I/O digital channel resource index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2 | ColumnioDigitalCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.3 | ColumnioDigitalCfgResourceType | read-write | current | Set your digital I/O resource type to Input or Output using this object. Please note that the corresponding hardware jumpers must be set accordingly. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.4 | ColumnioDigitalCfgEnable | read-write | current | Enable/disable this digital I/O channel |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.5 | ColumnioDigitalCfgDescription | read-write | current | Description for this digital I/O |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.6 | ColumnioDigitalInputCfgLatch | read-write | current | Digital Input: Latch type |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.7 | ColumnioDigitalInputCfgInvertSignal | read-write | current | Digital Input: Enable/disable signal inversion |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.8 | ColumnioDigitalInputCfgAlarmTrigger | read-write | current | Digital Input: Alarm trigger type |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.9 | ColumnioDigitalInputCfgAlarmClear | read-write | current | Digital Input: Clear alarm - manual/automatic |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.10 | ColumnioDigitalInputCfgAlarmEmail | read-write | current | Digital Input: Enable/disable email alert on triggered alarm |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.11 | ColumnioDigitalInputCfgAlarmSyslog | read-write | current | Digital Input: Enable/disable syslog alert on triggered alarm |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.12 | ColumnioDigitalInputCfgAlarmSNMP | read-write | current | Digital Input: Enable/disable SNMP trap on triggered alarm |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.13 | ColumnioDigitalOutputCfgType | read-write | current | Digital Output: Output type |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.14 | ColumnioDigitalOutputCfgMode | read-write | current | Digital Output: Output mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.15 | ColumnioDigitalOutputCfgPulseMode | read-write | current | Digital Output: Pulse mode (counted or continuous) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.16 | ColumnioDigitalOutputCfgPulseCount | read-write | current | Digital Output: Pulse count (only applies to counted pulse mode) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.17 | ColumnioDigitalOutputCfgInactiveSignalWidth | read-write | current | Digital Output: Inactive signal width, in 100 ms units (only applies to pulse mode) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.18 | ColumnioDigitalOutputCfgActiveSignalWidth | read-write | current | Digital Output: Active signal width, in 100 ms units (only applies to pulse mode) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.19 | ColumnioDigitalOutputCfgDelay | read-write | current | Digital Output: Delay time, in 100 ms units (only applies to delay mode) |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20 | ColumnioDigitalOutputCfgFailsafe | read-write | current | Digital Output: Failsafe action - choose the action that will take place when the failsafe timer expires |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2 | TableioDigitalExtensionCfgTable | not-accessible | current | I/O Digial Extention Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1 | RowioDigitalExtensionCfgEntry | not-accessible | current | An entry in the ioDigitalExtensionCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.1 | ColumnioDigitalExtCfgChanIndex | not-accessible | current | I/O resource index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.2 | ColumnioDigitalExtCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.3 | ColumnioDigitalExtCfgEnable | read-write | current | Enable/disable this digital I/O Extension |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.4 | ColumnioDigitalExtCfgConnMethod | read-write | current | Defines the type of connection being established Listen for connection, Connect to Host, or Local |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.5 | ColumnioDigitalExtCfgHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.6 | ColumnioDigitalExtCfgPort | read-write | current | The port number the target host is listening on for incoming/outgoing connections. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.7 | ColumnioDigitalExtCfgLinkChannel | read-write | current | The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.8 | ColumnioDigitalExtCfgKeepalive | read-write | current | Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.9 | ColumnioDigitalExtCfgMultiHost | read-write | current | Allows user to configure the multihost for client/server initiated connections |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.10 | ColumnioDigitalExtCfgTunnelName | read-write | current | The name of the HTTP tunnel associated with the Rlogin service. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.3 | TableioDigitalMultihostTable | not-accessible | current | I/O Digial Multihost Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1 | RowioDigitalMultihostEntry | not-accessible | current | An entry in the ioDigitalMultihostEntry, each relating to digital io channel. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.1 | ColumnioDigitalMultihostIndex | not-accessible | current | ioDigitalMultihostIndex |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.2 | ColumnioDigitalMultihostStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.4 | ColumnioDigitalMultihostMode | read-write | current | Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4 | TableioDigitalMultihostOutboundTable | not-accessible | current | Multihost outbound table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1 | RowioDigitalMultihostOutboundEntry | not-accessible | current | An entry in the ioDigitalMultihostOutboundTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.1 | ColumnioDigitalMultihostChanIndex | not-accessible | current | Channel Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.2 | ColumnioDigitalMultihostOutboundIndex | not-accessible | current | The outbound entry number |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.3 | ColumnioDigitalMultihostOutboundStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.4 | ColumnioDigitalMultihostOutboundHostID | read-write | current | The host name. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.5 | ColumnioDigitalMultihostOutboundTcpPort | read-write | current | The host TCP port. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.6 | ColumnioDigitalMultihostOutboundTunnel | read-write | current | The HTTP tunnel associated with this host. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5 | TableioDigitalSSLTable | not-accessible | current | io SSL Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1 | RowioDigitalSSLEntry | not-accessible | current | An entry in the ioDigitalSSLEntry, each relating to a io. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.1 | ColumnioDigitalSSLIndex | not-accessible | current | io Digital SSL Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.2 | ColumnioDigitalSSLStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.3 | ColumnioDigitalSSLEnabled | read-write | current | Enables/disables SSL. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.4 | ColumnioDigitalSSLuseServer | read-write | current | Uses the SSL/TLS server configuration for the line. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.5 | ColumnioDigitalSSLVersion | read-write | current | Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it wil… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.6 | ColumnioDigitalSSLType | read-write | current | Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.7 | ColumnioDigitalSSLVerifyPeerCertificate | read-write | current | Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.8 | ColumnioDigitalSSLCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.9 | ColumnioDigitalSSLStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.10 | ColumnioDigitalSSLLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.11 | ColumnioDigitalSSLOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.12 | ColumnioDigitalSSLOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.13 | ColumnioDigitalSSLCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.14 | ColumnioDigitalSSLEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6 | TableioDigitalSSLCipherTable | not-accessible | current | Digital SSL Cipher. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1 | RowioDigitalSSLCipherEntry | not-accessible | current | An entry in the sslCipherTable, each relating to a cipher entry. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.1 | ColumnioDigitalSSLChanIndex | not-accessible | current | The io number |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.2 | ColumnioDigitalSSLCipherIndex | not-accessible | current | The cipher priority. 1- highest 5 - lowest. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.3 | ColumnioDigitalSSLCipherStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.4 | ColumnioDigitalSSLCipherEncryption | read-write | current | SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.5 | ColumnioDigitalSSLCipherKeySizeMin | read-write | current | The minimum key size value that will be used for the specified encryption type. The default is 40. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.6 | ColumnioDigitalSSLCipherKeySizeMax | read-write | current | The maximum key size value that will be used for the specified encryption type. The default is 256. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.7 | ColumnioDigitalSSLCipherKeyExchange | read-write | current | The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.8 | ColumnioDigitalSSLCipherHMAC | read-write | current | Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3 | NodeioRelayCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1 | TableioRelayCfgTable | not-accessible | current | ioRelayCfgTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1 | RowioRelayCfgEntry | not-accessible | current | An entry in the ioRelayCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.1 | ColumnioRelayChannelIndex | not-accessible | current | I/O relay channel resource index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.2 | ColumnioRelayCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.3 | ColumnioRelayCfgEnable | read-write | current | Enable/disable this Relay I/O channel |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.4 | ColumnioRelayCfgDescription | read-write | current | Description for this relay |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.5 | ColumnioRelayCfgMode | read-write | current | Relay output mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.6 | ColumnioRelayCfgPulseMode | read-write | current | Relay pulse mode (only applies when output mode is set to 'pulse' |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.7 | ColumnioRelayCfgPulseCount | read-write | current | Relay pulse count; only applies for counted pulse mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.8 | ColumnioRelayCfgInactiveSignalWidth | read-write | current | Relay inactive signal width in 100 ms units; only applies to pulse mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.9 | ColumnioRelayCfgActiveSignalWidth | read-write | current | Relay active signal width in 100 ms units; only applies to pulse mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.10 | ColumnioRelayCfgDelay | read-write | current | Relay pulse delay, in 100 ms units; only applies to delay mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.11 | ColumnioRelayCfgFailsafe | read-write | current | Action to take when the failsafe timer expires |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2 | TableioRelayExtensionCfgTable | not-accessible | current | ioRelayExtensionCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1 | RowioRelayExtensionCfgEntry | not-accessible | current | An entry in the ioReleayExtensionCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.1 | ColumnioRelayExtCfgChanIndex | not-accessible | current | I/O Relay channel resource index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.2 | ColumnioRelayExtCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.3 | ColumnioRelayExtCfgEnable | read-write | current | Enable/disable this digital I/O Extension |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.4 | ColumnioRelayExtCfgConnMethod | read-write | current | Defines the type of connection being established Listen for connection, Connect to Host, or Local |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.5 | ColumnioRelayExtCfgHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.6 | ColumnioRelayExtCfgPort | read-write | current | The port number the target host is listening on for incoming/outgoing connections. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.7 | ColumnioRelayExtCfgLinkChannel | read-write | current | The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.8 | ColumnioRelayExtCfgKeepalive | read-write | current | Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.9 | ColumnioRelayExtCfgMultiHost | read-write | current | Allows user to configure the multihost for client/server initiated connections |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.10 | ColumnioRelayExtCfgTunnelName | read-write | current | The name of the HTTP tunnel associated with the Rlogin service. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.3 | TableioRelayMultihostTable | not-accessible | current | I/O Multihost Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1 | RowioRelayMultihostEntry | not-accessible | current | An entry in the ioRelayMultihostEntry, each relating to digital io channel. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.1 | ColumnioRelayMultihostIndex | not-accessible | current | ioRelayMultihostChanIndex |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.2 | ColumnioRelayMultihostStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.4 | ColumnioRelayMultihostMode | read-write | current | Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4 | TableioRelayMultihostOutboundTable | not-accessible | current | Multihost outbound table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1 | RowioRelayMultihostOutboundEntry | not-accessible | current | An entry in the ioRelayMultihostOutboundTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.1 | ColumnioRelayMultihostChanIndex | not-accessible | current | Channel Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.2 | ColumnioRelayMultihostOutboundIndex | not-accessible | current | The outbound entry number |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.3 | ColumnioRelayMultihostOutboundStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.4 | ColumnioRelayMultihostOutboundHostID | read-write | current | The host name. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.5 | ColumnioRelayMultihostOutboundTcpPort | read-write | current | The host TCP port. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.6 | ColumnioRelayMultihostOutboundTunnel | read-write | current | The HTTP tunnel associated with this host. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5 | TableioRelaySSLTable | not-accessible | current | io Relay SSL Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1 | RowioRelaySSLEntry | not-accessible | current | An entry in the ioRelaySSLEntry, each relating to a io. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.1 | ColumnioRelaySSLIndex | not-accessible | current | io Relay SSL Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.2 | ColumnioRelaySSLStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.3 | ColumnioRelaySSLEnabled | read-write | current | Enables/disables SSL. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.4 | ColumnioRelaySSLuseServer | read-write | current | Uses the SSL/TLS server configuration for the line. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.5 | ColumnioRelaySSLVersion | read-write | current | Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it wil… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.6 | ColumnioRelaySSLType | read-write | current | Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.7 | ColumnioRelaySSLVerifyPeerCertificate | read-write | current | Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.8 | ColumnioRelaySSLCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.9 | ColumnioRelaySSLStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.10 | ColumnioRelaySSLLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.11 | ColumnioRelaySSLOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.12 | ColumnioRelaySSLOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.13 | ColumnioRelaySSLCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.14 | ColumnioRelaySSLEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6 | TableioRelaySSLCipherTable | not-accessible | current | SSL CIpher. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1 | RowioRelaySSLCipherEntry | not-accessible | current | An entry in the sslCipherTable, each relating to a cipher entry. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.1 | ColumnioRelaySSLChanIndex | not-accessible | current | The io number |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.2 | ColumnioRelaySSLCipherIndex | not-accessible | current | The cipher priority. 1- highest 5 - lowest. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.3 | ColumnioRelaySSLCipherStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.4 | ColumnioRelaySSLCipherEncryption | read-write | current | SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.5 | ColumnioRelaySSLCipherKeySizeMin | read-write | current | The minimum key size value that will be used for the specified encryption type. The default is 40. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.6 | ColumnioRelaySSLCipherKeySizeMax | read-write | current | The maximum key size value that will be used for the specified encryption type. The default is 256. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.7 | ColumnioRelaySSLCipherKeyExchange | read-write | current | The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.8 | ColumnioRelaySSLCipherHMAC | read-write | current | Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4 | NodeioLineSignalCfg | |||
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1 | TableioLineSignalCfgTable | not-accessible | current | ioLineSignalCfgTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1 | RowioLineSignalCfgEntry | not-accessible | current | An entry in the ioLineSignalCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.1 | ColumnioLineSignalCfgPortIndex | not-accessible | current | Index of the associated serial port |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.2 | ColumnioLineSignalCfgSignalIndex | not-accessible | current | Index of the associate line signal |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.3 | ColumnioLineSignalCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.4 | ColumnioLineSignalCfgResourceType | read-only | current | Signifies whether this resource is input or output |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.5 | ColumnioLineSignalCfgEnable | read-write | current | Enable/disable this resource |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.6 | ColumnioLineSignalCfgDescription | read-write | current | Description for this resource |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.7 | ColumnioLineSignalInputCfgLatch | read-write | current | Line Signal (input): Latch mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.8 | ColumnioLineSignalInputCfgInvertSignal | read-write | current | Line Signal (input): Enable/disable signal inversion |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.9 | ColumnioLineSignalInputCfgAlarmTrigger | read-write | current | Line Signal (input): Alarm trigger type |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.10 | ColumnioLineSignalInputCfgAlarmClear | read-write | current | Line Signal (input): Alarm clear type |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.11 | ColumnioLineSignalInputCfgAlarmEmail | read-write | current | Line Signal (input): Enable/disable email alert on alarm trigger |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.12 | ColumnioLineSignalInputCfgAlarmSyslog | read-write | current | Line Signal (input): Enable/disable syslog alert on alarm trigger |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.13 | ColumnioLineSignalInputCfgAlarmSNMP | read-write | current | Line Signal (input): Enable/disable SNMP alert on alarm trigger |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.14 | ColumnioLineSignalOutputCfgFailsafe | read-write | current | Line Signal (output): Action to take when failsafe timer expires |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2 | TableioLineExtensionSigCfgTable | not-accessible | current | ioLineExtensionSigCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1 | RowioLineExtensionSigCfgEntry | not-accessible | current | An entry in the ioLineExtensionCfgTable |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.1 | ColumnioLineExtSigCfgChanIndex | not-accessible | current | I/O resource index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.2 | ColumnioLineExtSigCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.3 | ColumnioLineExtSigCfgEnable | read-write | current | Enable/disable this digital I/O Extension |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.4 | ColumnioLineExtSigCfgConnMethod | read-write | current | Defines the type of connection being established Listen for connection, Connect to Host, or Local |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.5 | ColumnioLineExtSigCfgHost | read-write | current | The name of the target host. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.6 | ColumnioLineExtSigCfgPort | read-write | current | The port number the target host is listening on for incoming/outgoing connections. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.7 | ColumnioLineExtSigCfgLinkChannel | read-write | current | The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.8 | ColumnioLineExtSigCfgKeepalive | read-write | current | Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.9 | ColumnioLineExtSigCfgMultiHost | read-write | current | Allows user to configure the multihost for client/server initiated connections |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.10 | ColumnioLineExtSigCfgTunnelName | read-write | current | The name of the HTTP tunnel associated with the Rlogin service. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.3 | TableioLineMultihostSigTable | not-accessible | current | I/O Multihost Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1 | RowioLineMultihostSigEntry | not-accessible | current | An entry in the ioLineMultihostEntry, each relating to digital io channel. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.1 | ColumnioLineMultihostSigIndex | not-accessible | current | ioLineMultihostSigIndex |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.2 | ColumnioLineMultihostSigStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.4 | ColumnioLineMultihostModeSig | read-write | current | Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4 | TableioLineMultihostOutboundSigTable | not-accessible | current | Multihost outbound table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1 | RowioLineMultihostOutboundSigEntry | not-accessible | current | An entry in the ioLineMultihostOutboundTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.1 | ColumnioLineMultihostSigChanIndex | not-accessible | current | Channel Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.2 | ColumnioLineMultihostOutboundSigIndex | not-accessible | current | The outbound entry number |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.3 | ColumnioLineMultihostOutboundSigStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.4 | ColumnioLineMultihostOutboundSigHostID | read-write | current | The host name. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.5 | ColumnioLineMultihostOutboundSigTcpPort | read-write | current | The host TCP port. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.6 | ColumnioLineMultihostOutboundSigTunnel | read-write | current | The HTTP tunnel associated with this host. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5 | TableioLineSSLSigTable | not-accessible | current | io SSL Table. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1 | RowioLineSSLSigEntry | not-accessible | current | An entry in the ioDigitalSSLEntry, each relating to a io. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.1 | ColumnioLineSSLSigIndex | not-accessible | current | io SSL Index |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.2 | ColumnioLineSSLSigStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.3 | ColumnioLineSSLSigEnabled | read-write | current | Enables/disables SSL. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.4 | ColumnioLineSSLSiguseServer | read-write | current | Uses the SSL/TLS server configuration for the line. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.5 | ColumnioLineSSLSigVersion | read-write | current | Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it wil… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.6 | ColumnioLineSSLSigType | read-write | current | Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.7 | ColumnioLineSSLSigVerifyPeerCertificate | read-write | current | Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.8 | ColumnioLineSSLSigCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.9 | ColumnioLineSSLSigStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.10 | ColumnioLineSSLSigLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.11 | ColumnioLineSSLSigOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.12 | ColumnioLineSSLSigOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.13 | ColumnioLineSSLSigCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.14 | ColumnioLineSSLSigEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6 | TableioLineSSLSigCipherTable | not-accessible | current | SSL CIpher. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1 | RowioLineSSLSigCipherEntry | not-accessible | current | An entry in the sslCipherTable, each relating to a cipher entry. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.1 | ColumnioLineSSLSigChanIndex | not-accessible | current | The io number |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.2 | ColumnioLineSSLSigCipherIndex | not-accessible | current | The cipher priority. 1- highest 5 - lowest. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.3 | ColumnioLineSSLSigCipherStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.4 | ColumnioLineSSLSigCipherEncryption | read-write | current | SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.5 | ColumnioLineSSLSigCipherKeySizeMin | read-write | current | The minimum key size value that will be used for the specified encryption type. The default is 40. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.6 | ColumnioLineSSLSigCipherKeySizeMax | read-write | current | The maximum key size value that will be used for the specified encryption type. The default is 256. |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.7 | ColumnioLineSSLSigCipherKeyExchange | read-write | current | The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS… |
| 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.8 | ColumnioLineSSLSigCipherHMAC | read-write | current | Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any. |
| 1.3.6.1.4.1.1966.12.1.45.2.2 | NodeioChannelStatus | |||
| 1.3.6.1.4.1.1966.12.1.45.2.2.1 | ScalarioChannelFunction | read-write | current | killall - Apply configuration changes to all channels |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2 | NodeioAnalogStatus | |||
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1 | TableioAnalogStatusTable | not-accessible | current | ioAnalogStatusTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1 | RowioAnalogStatusEntry | not-accessible | current | An entry in the ioAnalogStatusTable |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.1 | ColumnioAnalogStatusChannelIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.2 | ColumnioAnalogStatusEnabled | read-only | current | Enabled |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.3 | ColumnioAnalogStatusDescription | read-only | current | Description |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.4 | ColumnioAnalogFunction | read-write | current | kill - Apply configuration changes to this entry |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.5 | ColumnioAnalogStatusInputState | read-only | current | Input state. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.6 | ColumnioAnalogStatusValue | read-only | current | Current analog input value. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.7 | ColumnioAnalogStatusMinimum | read-only | current | Minimum analog input value. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.8 | ColumnioAnalogStatusMaximum | read-only | current | Maximum analog input value. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.9 | ColumnioAnalogStatusAlarmLevel | read-only | current | Alarm level. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3 | NodeioDigitalStatus | |||
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1 | TableioDigitalStatusTable | not-accessible | current | ioDigitalStatusTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1 | RowioDigitalStatusEntry | not-accessible | current | An entry in the ioDigitalStatusTable |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.1 | ColumnioDigitalStatusChannelIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.2 | ColumnioDigitalStatusEnabled | read-only | current | Enabled |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.3 | ColumnioDigitalStatusDescription | read-only | current | Description |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.4 | ColumnioDigitalStatusType | read-only | current | Resource type |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.5 | ColumnioDigitalFunction | read-write | current | kill - Apply configuration changes to this entry |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.6 | ColumnioDigitalStatusState | read-write | current | Digital State. . |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.7 | ColumnioDigitalStatusLatchedInputState | read-only | current | For digital inputs only. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.8 | ColumnioDigitalStatusInputAlarm | read-only | current | LineSignal State. . |
| 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.9 | ColumnioDigitalStatusExtensionState | read-only | current | For digital inputs and outputs only. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4 | NodeioRelayStatus | |||
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1 | TableioRelayStatusTable | not-accessible | current | ioRelayStatusTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1 | RowioRelayStatusEntry | not-accessible | current | An entry in the ioRelayStatusTable |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.1 | ColumnioRelayStatusChannelIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.2 | ColumnioRelayStatusEnabled | read-only | current | Enabled |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.3 | ColumnioRelayStatusDescription | read-only | current | Description |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.4 | ColumnioRelayFunction | read-write | current | kill - Apply configuration changes to this entry |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.5 | ColumnioRelayStatusState | read-write | current | Relay State. . |
| 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.6 | ColumnioRelayStatusExtensionState | read-only | current | For digital inputs/outputs/relays only. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5 | NodeioLineSignalStatus | |||
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1 | TableioLineSignalStatusTable | not-accessible | current | ioLineSignalStatusTable. |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1 | RowioLineSignalStatusEntry | not-accessible | current | An entry in the ioLineSignalStatusTable |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.1 | ColumnioLineSignalStatusPortIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.2 | ColumnioLineSignalStatusSignalIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.3 | ColumnioLineSignalStatusEnabled | read-only | current | Enabled |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.4 | ColumnioLineSignalStatusDescription | read-only | current | Description |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.5 | ColumnioLineSignalStatusType | read-only | current | resource type |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.6 | ColumnioLineSignalFunction | read-write | current | kill - Apply configuration changes to this entry |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.7 | ColumnioLineSignalStatusState | read-write | current | LineSignal State. . |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.8 | ColumnioLineSignalStatusLatchedInputState | read-only | current | LineSignal State. . |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.9 | ColumnioLineSignalStatusInputAlarm | read-only | current | LineSignal State. . |
| 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.10 | ColumnioLineSignalStatusExtensionState | read-only | current | For serial inputs and outputs only. |
| 1.3.6.1.4.1.1966.12.1.46 | NodeclusteringInfo | |||
| 1.3.6.1.4.1.1966.12.1.46.1 | TableclusteringTable | not-accessible | current | The Clustering table. |
| 1.3.6.1.4.1.1966.12.1.46.1.1 | RowclusteringEntry | not-accessible | current | An entry in the clusteringEntry, each relating to a port. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.1 | ColumnclusteringIndex | not-accessible | current | The table entry number. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.2 | ColumnclusteringStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.46.1.1.3 | ColumnclusteringServerName | read-write | current | The slave server's name. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.4 | ColumnclusteringSlaveIP | read-write | current | The remote slave server's IP address. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.5 | ColumnclusteringPort | read-write | current | The port number on the clustered slave server. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.6 | ColumnclusteringPortName | read-write | current | The slave server's port name. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.7 | ColumnclusteringSlavePort | read-write | current | The starting TCP port on the slave server. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.8 | ColumnclusteringMasterPort | read-write | current | The starting TCP port on the master server. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.9 | ColumnclusteringProtocol | read-write | current | The protocol used to connect between the slave and server. |
| 1.3.6.1.4.1.1966.12.1.46.1.1.10 | ColumnclusteringSlaveIPTunnel | read-write | current | The HTTP tunnel associated with the slave IP |
| 1.3.6.1.4.1.1966.12.1.47 | NodedynamicDNSInfo | |||
| 1.3.6.1.4.1.1966.12.1.47.1 | ScalardynamicDNSStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.47.2 | ScalardynamicDNSEnabled | read-write | current | Enable/disable dynamic DNS. |
| 1.3.6.1.4.1.1966.12.1.47.3 | ScalardynamicDNSHostname | read-write | current | Host name. |
| 1.3.6.1.4.1.1966.12.1.47.4 | ScalardynamicDNSUserName | read-write | current | user name. |
| 1.3.6.1.4.1.1966.12.1.47.5 | ScalardynamicDNSPassword | read-write | current | Password. |
| 1.3.6.1.4.1.1966.12.1.47.6 | ScalardynamicDNSSystemType | read-write | current | System type. |
| 1.3.6.1.4.1.1966.12.1.47.7 | ScalardynamicDNSWildcard | read-write | current | wildcard. |
| 1.3.6.1.4.1.1966.12.1.47.8 | ScalardynamicDNSConnectionMethod | read-write | current | connection method. |
| 1.3.6.1.4.1.1966.12.1.47.9 | ScalardynamicDNSSSLVerifyPeerCertificate | read-write | current | Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl… |
| 1.3.6.1.4.1.1966.12.1.47.10 | ScalardynamicDNSSSLCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.47.11 | ScalardynamicDNSSSLStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.47.12 | ScalardynamicDNSSSLLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.47.13 | ScalardynamicDNSSSLOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.47.14 | ScalardynamicDNSSSLOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.47.15 | ScalardynamicDNSSSLCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.47.16 | ScalardynamicDNSSSLEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.47.17 | ScalardynamicDNSStatusString | read-only | current | Dynamic DNS statistics |
| 1.3.6.1.4.1.1966.12.1.47.18 | TabledynamicDNSSSLCipherTable | not-accessible | current | SSL CIpher. |
| 1.3.6.1.4.1.1966.12.1.47.18.1 | RowdynamicDNSSSLCipherEntry | not-accessible | current | An entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry. |
| 1.3.6.1.4.1.1966.12.1.47.18.1.1 | ColumndynamicDNSSSLCipherPriority | not-accessible | current | The cipher priority. 1- highest 5 - lowest. |
| 1.3.6.1.4.1.1966.12.1.47.18.1.2 | ColumndynamicDNSSSLCipherStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.47.18.1.3 | ColumndynamicDNSSSLCipherEncryption | read-write | current | SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any. |
| 1.3.6.1.4.1.1966.12.1.47.18.1.4 | ColumndynamicDNSSSLCipherKeySizeMin | read-write | current | The minimum key size value that will be used for the specified encryption type. The default is 40. |
| 1.3.6.1.4.1.1966.12.1.47.18.1.5 | ColumndynamicDNSSSLCipherKeySizeMax | read-write | current | The maximum key size value that will be used for the specified encryption type. The default is 256. |
| 1.3.6.1.4.1.1966.12.1.47.18.1.6 | ColumndynamicDNSSSLCipherKeyExchange | read-write | current | The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS… |
| 1.3.6.1.4.1.1966.12.1.47.18.1.7 | ColumndynamicDNSSSLCipherHMAC | read-write | current | Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any. |
| 1.3.6.1.4.1.1966.12.1.48 | NodepciInfo | |||
| 1.3.6.1.4.1.1966.12.1.48.1 | NodepciCardInfo | |||
| 1.3.6.1.4.1.1966.12.1.48.1.1 | ScalarpciCardStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.48.1.2 | ScalarpciCardType | read-only | current | PCI Card Type |
| 1.3.6.1.4.1.1966.12.1.48.2 | NodepciWwanInfo | |||
| 1.3.6.1.4.1.1966.12.1.48.2.1 | ScalarwwanCardStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.48.2.2 | ScalarwwanCardType | read-write | current | Wireless Wan Card Type |
| 1.3.6.1.4.1.1966.12.1.48.2.3 | ScalarwwanAPN | read-write | current | Specify the APN required by your internet provider to access their network. See the Internet provider documentation for more information. |
| 1.3.6.1.4.1.1966.12.1.48.2.4 | ScalarwwanUserName | read-write | current | Specify the name required by your Internet provider to access their network. |
| 1.3.6.1.4.1.1966.12.1.48.2.5 | ScalarwwanPhoneNumer | read-write | current | Specify the phone number provided by your service provider to access their wireless network. Probably similar to *99***1# |
| 1.3.6.1.4.1.1966.12.1.48.2.6 | ScalarwwanInitString | read-write | current | Specify the initialization string required by your Internet service provider for your wireless WAN card. |
| 1.3.6.1.4.1.1966.12.1.48.2.7 | ScalarwwanNetworkRegistration | read-only | current | Network Registration. Possible Values 0 - Not Registered. Not searching for a network, 1 - Registered. Home Network, 2 - Not Registered. Searching for a networ… |
| 1.3.6.1.4.1.1966.12.1.48.2.8 | ScalarwwanSignalStrength | read-only | current | Signal Strength |
| 1.3.6.1.4.1.1966.12.1.48.3 | NodepciFiberLanInfo | |||
| 1.3.6.1.4.1.1966.12.1.48.3.1 | ScalarpciFiberLanStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.48.3.2 | ScalarpciFiberLanType | read-write | current | PCI Fiber LAN Card Type |
| 1.3.6.1.4.1.1966.12.1.48.4 | NodepciUsbInfo | |||
| 1.3.6.1.4.1.1966.12.1.48.4.1 | ScalarusbStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.48.4.2 | ScalarusbAPN | read-write | current | Specify the APN required by your internet provider to access their network. See the Internet provider documentation for more information. |
| 1.3.6.1.4.1.1966.12.1.48.4.3 | ScalarusbUserName | read-write | current | Specify the name required by your Internet provider to access their network. |
| 1.3.6.1.4.1.1966.12.1.48.4.4 | ScalarusbPhoneNumer | read-write | current | Specify the phone number provided by your service provider to access their wireless network. Probably similar to *99***1# |
| 1.3.6.1.4.1.1966.12.1.48.4.5 | ScalarusbInitString | read-write | current | Specify the initialization string required by your Internet service provider for your USB device. |
| 1.3.6.1.4.1.1966.12.1.48.4.6 | ScalarusbPin | read-write | current | Specify the PIN required for your USB device. |
| 1.3.6.1.4.1.1966.12.1.49 | NodevmodemPhoneInfo | |||
| 1.3.6.1.4.1.1966.12.1.49.1 | TablevmodemPhoneInfoTable | not-accessible | current | The vmodem phone info table. |
| 1.3.6.1.4.1.1966.12.1.49.1.1 | RowvmodemPhoneInfoEntry | not-accessible | current | An entry in the vmodemPhoneInfoTable, each relating to a host. |
| 1.3.6.1.4.1.1966.12.1.49.1.1.1 | ColumnvmodemPhoneIndex | not-accessible | current | The table entry number for this vmodem phone table |
| 1.3.6.1.4.1.1966.12.1.49.1.1.2 | ColumnvmodemPhoneStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.49.1.1.3 | ColumnvmodemPhone | read-write | current | The modem name used for this modem entry. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.49.1.1.4 | ColumnvmodemPhoneIP | read-write | current | The IP address corresponding to a phone number. If the IP address is blank, then the Host IP address will be used |
| 1.3.6.1.4.1.1966.12.1.49.1.1.5 | ColumnvmodemPhonePort | read-write | current | TCP port number corresponding to a phone number. |
| 1.3.6.1.4.1.1966.12.1.49.1.1.6 | ColumnvmodemPhoneTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.49.1.1.7 | ColumnvmodemPhoneHostName | read-write | current | The name of a configured host that will correspond to the phone number. |
| 1.3.6.1.4.1.1966.12.1.50 | NodeipsecInfo | |||
| 1.3.6.1.4.1.1966.12.1.50.1 | TableipsecTable | not-accessible | current | The IPsec table. |
| 1.3.6.1.4.1.1966.12.1.50.1.1 | RowipsecEntry | not-accessible | current | An entry in the ipsecEntry, each relating to a IPsec tunnel. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.1 | ColumnipsecIndex | not-accessible | current | The table entry number for this IPsec tunnel. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.2 | ColumnipsecStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.50.1.1.3 | ColumnipsecName | read-write | current | The IPsec tunnel name. To delete an IPsec, set this field to blank. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.4 | ColumnipsecAuthMethod | read-write | current | The type of authentication Method that the IPsec tunnel will use |
| 1.3.6.1.4.1.1966.12.1.50.1.1.5 | ColumnipsecSecret | read-write | current | The IPsec tunnel secret. This applies to all IPsec and and L2TP/IPsec tunnels |
| 1.3.6.1.4.1.1966.12.1.50.1.1.6 | ColumnipsecLocalDevice | read-write | current | Define local device (the Device Server) either in left or right |
| 1.3.6.1.4.1.1966.12.1.50.1.1.7 | ColumnipsecBootaction | read-write | current | Select one of the boot action from: start, add or ignore. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.8 | ColumnipsecLocalIpAddress | read-write | current | IPv4/IPv6 or FQDN(Fully Qualified Domain Name) |
| 1.3.6.1.4.1.1966.12.1.50.1.1.9 | ColumnipsecLocalExternalIpAddress | read-write | current | External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T through a router/firewall. Only Available if Nat-T is on. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.10 | ColumnipsecLocalNextHop | read-write | current | The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address. Leave blank if using the default gateway configured … |
| 1.3.6.1.4.1.1966.12.1.50.1.1.11 | ColumnipsecLocalHostNetwork | read-write | current | The network we are trying to create a VPN connection for. Leave blank when creating a host to host VPN connection. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.12 | ColumnipsecLocalNetmaskBit | read-write | current | If the local host/network address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.13 | ColumnipsecRemoteIpAddress | read-write | current | IPv4/IPv6 or FQDN(Fully Qualified Domain Name) |
| 1.3.6.1.4.1.1966.12.1.50.1.1.14 | ColumnipsecRemoteExternalIpAddress | read-write | current | External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T throught a router/firewall. Only Available if Nat-T is on. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.15 | ColumnipsecRemoteNextHop | read-write | current | The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address. Leave blank if using the default gateway configured … |
| 1.3.6.1.4.1.1966.12.1.50.1.1.16 | ColumnipsecRemoteHostNetwork | read-write | current | The host/network we are trying to create a VPN connection for. Leave blank when creating a host to host VPN connection. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.17 | ColumnipsecRemoteNetmaskBit | read-write | current | If the remote host/network address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.18 | ColumnipsecRemoteValCritCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.19 | ColumnipsecRemoteValCritStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.20 | ColumnipsecRemoteValCritLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.21 | ColumnipsecRemoteValCritOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.22 | ColumnipsecRemoteValCritOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.23 | ColumnipsecRemoteValCritCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.50.1.1.24 | ColumnipsecRemoteValCritEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.51 | Nodeipv6Info | |||
| 1.3.6.1.4.1.1966.12.1.51.1 | Nodeipv6ServicesInfo | |||
| 1.3.6.1.4.1.1966.12.1.51.1.1 | Scalaripv6serviceStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.51.1.2 | ScalarserviceAutoDiscovery1 | read-write | current | (Ethernet 1) When on, the Device Server will send out a Router Solicitation message. If a Router Advertisement message is received, the Device Server will conf… |
| 1.3.6.1.4.1.1966.12.1.51.1.3 | ScalarserviceDHCPv61 | read-write | current | (Ethernet 1) When on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off. |
| 1.3.6.1.4.1.1966.12.1.51.1.4 | ScalarserviceRouterAdvertisement1 | read-write | current | (Ethernet 1) When on, the Device Server will periodically send IPv6 Router Advertisement messages and respond to Router Solicitation messages. The Router Adver… |
| 1.3.6.1.4.1.1966.12.1.51.1.5 | ScalarserviceRouterAdvertisementDHCP1 | read-write | current | (Ethernet 1) When on, the Router Advertisement message indicates to use the DHCPv6 server for obtaining additional IPv6 addresses and configuration parameters.… |
| 1.3.6.1.4.1.1966.12.1.51.1.6 | ScalarserviceRouterAdvertisementOther1 | read-write | current | (Ethernet 1) When on, the Router Advertisement message indicates to use the DHCPv6 server to obtain additional configuration parameters. Default is off. |
| 1.3.6.1.4.1.1966.12.1.51.1.7 | ScalarserviceAutoDiscovery2 | read-write | current | (Ethernet 2) When on, the Device Server will send out a Router Solicitation message. If a Router Advertisement message is received, the Device Server will conf… |
| 1.3.6.1.4.1.1966.12.1.51.1.8 | ScalarserviceDHCPv62 | read-write | current | (Ethernet 2) When on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off. |
| 1.3.6.1.4.1.1966.12.1.51.1.9 | ScalarserviceRouterAdvertisement2 | read-write | current | (Ethernet 2) When on, the Device Server will periodically send IPv6 Router Advertisement messages and respond to Router Solicitation messages. The Router Adver… |
| 1.3.6.1.4.1.1966.12.1.51.1.10 | ScalarserviceRouterAdvertisementDHCP2 | read-write | current | (Ethernet 2) When on, the Router Advertisement message indicates to use the DHCPv6 server for obtaining additional IPv6 addresses and configuration parameters.… |
| 1.3.6.1.4.1.1966.12.1.51.1.10 | ScalarserviceRouterAdvertisementDHCP3 | read-write | current | (Ethernet 3) When on, the Router Advertisement message indicates to use the DHCPv6 server for obtaining additional IPv6 addresses and configuration parameters.… |
| 1.3.6.1.4.1.1966.12.1.51.1.11 | ScalarserviceRouterAdvertisementOther2 | read-write | current | (Ethernet 2) When on, the Router Advertisement message indicates to use the DHCPv6 server to obtain additional configuration parameters. Default is off. |
| 1.3.6.1.4.1.1966.12.1.51.1.11 | ScalarserviceRouterAdvertisementOther3 | read-write | current | (Ethernet 3) When on, the Router Advertisement message indicates to use the DHCPv6 server to obtain additional configuration parameters. Default is off. |
| 1.3.6.1.4.1.1966.12.1.51.1.12 | ScalarserviceDHCPv6IPAddresses | read-write | current | When on, the Device Server will accept IPv6 address(es) from the DHCPv6 server. |
| 1.3.6.1.4.1.1966.12.1.51.1.13 | ScalarserviceDHCPv6NetworkPrefix | read-write | current | When on, the Device Server will accept the network prefix from the DHCPv6 server. |
| 1.3.6.1.4.1.1966.12.1.51.1.14 | ScalarserviceAutoDiscovery3 | read-write | current | (Ethernet 3) When on, the Device Server will send out a Router Solicitation message. If a Router Advertisement message is received, the Device Server will conf… |
| 1.3.6.1.4.1.1966.12.1.51.1.15 | ScalarserviceDHCPv63 | read-write | current | (Ethernet 3) When on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off. |
| 1.3.6.1.4.1.1966.12.1.51.1.16 | ScalarserviceRouterAdvertisement3 | read-write | current | (Ethernet 3) When on, the Device Server will periodically send IPv6 Router Advertisement messages and respond to Router Solicitation messages. The Router Adver… |
| 1.3.6.1.4.1.1966.12.1.51.2 | Tableipv6AddressEth1Table | not-accessible | current | Ethernet 1 IPv6 custom address table. |
| 1.3.6.1.4.1.1966.12.1.51.2.1 | Rowipv6AddressEth1Entry | not-accessible | current | Ethernet 1 IPv6 custom entry. |
| 1.3.6.1.4.1.1966.12.1.51.2.1.1 | Columnipv6AddressEth1Index | not-accessible | current | Ethernet 1 custom IPv6 address index. |
| 1.3.6.1.4.1.1966.12.1.51.2.1.2 | Columnipv6AddressEth1Status | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.51.2.1.3 | Columnipv6AddressEth1Addr | read-write | current | (Ethernet 1) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address (must turn ipv6Addre… |
| 1.3.6.1.4.1.1966.12.1.51.2.1.4 | Columnipv6AddressEth1PrefixBits | read-write | current | (Ethernet 1) The IPv6 prefix bits of either the network or IPv6 address. |
| 1.3.6.1.4.1.1966.12.1.51.2.1.5 | Columnipv6AddressEth1Auto | read-write | current | (Ethernet 1) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address. |
| 1.3.6.1.4.1.1966.12.1.51.2.1.6 | Columnipv6AddressEth1SendAdvertise | read-write | current | (Ethernet 1) When on, the Device Server will include the IPv6 address in router advertisements. |
| 1.3.6.1.4.1.1966.12.1.51.3 | Tableipv6AddressEth2Table | not-accessible | current | Ethernet 2 IPv6 custom address table. |
| 1.3.6.1.4.1.1966.12.1.51.3.1 | Rowipv6AddressEth2Entry | not-accessible | current | Ethernet 2 IPv6 custom entry. |
| 1.3.6.1.4.1.1966.12.1.51.3.1.1 | Columnipv6AddressEth2Index | not-accessible | current | Ethernet 2 custom IPv6 address index. |
| 1.3.6.1.4.1.1966.12.1.51.3.1.2 | Columnipv6AddressEth2Status | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.51.3.1.4 | Columnipv6AddressEth2PrefixBits | read-write | current | (Ethernet 2) The IPv6 prefix bits of either the network or IPv6 address. |
| 1.3.6.1.4.1.1966.12.1.51.3.1.5 | Columnipv6AddressEth2Auto | read-write | current | (Ethernet 2) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address. |
| 1.3.6.1.4.1.1966.12.1.51.3.1.6 | Columnipv6AddressEth2SendAdvertise | read-write | current | (Ethernet 2) When on, the Device Server will include the IPv6 address in router advertisements. |
| 1.3.6.1.4.1.1966.12.1.51.4 | Tableipv6AddressEth3Table | not-accessible | current | Ethernet 3 IPv6 custom address table. |
| 1.3.6.1.4.1.1966.12.1.51.4 | Tableipv6TunnelTable | not-accessible | current | IPv6 tunnel table. |
| 1.3.6.1.4.1.1966.12.1.51.4.1 | Rowipv6AddressEth3Entry | not-accessible | current | Ethernet 3 IPv6 custom entry. |
| 1.3.6.1.4.1.1966.12.1.51.4.1 | Rowipv6TunnelEntry | not-accessible | current | IPv6 tunnel entry. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.1 | Columnipv6AddressEth3Index | not-accessible | current | Ethernet 3 custom IPv6 address index. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.1 | Columnipv6TunnelIndex | not-accessible | current | The IPv6 tunnel index entry. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.2 | Columnipv6AddressEth3Status | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.51.4.1.2 | Columnipv6TunnelStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.51.4.1.3 | Columnipv6AddressEth2Addr | read-write | current | (Ethernet 2) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address or enter a specific … |
| 1.3.6.1.4.1.1966.12.1.51.4.1.3 | Columnipv6TunnelName | read-write | current | The name of the IPv6 tunnel. Maximum 16 alphanumeric characters. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.4 | Columnipv6AddressEth3PrefixBits | read-write | current | (Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.4 | Columnipv6TunnelMode | read-write | current | The method or protocol that is used to create the IPv6 tunnel. o Manual-When specified, the Device Server will manually create the IPv6 tunnel to the specified… |
| 1.3.6.1.4.1.1966.12.1.51.4.1.5 | Columnipv6AddressEth3Auto | read-write | current | (Ethernet 3) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.5 | Columnipv6TunnelRemoteHost | read-write | current | The IPv4 host that can access the IPv6 network when the Mode is Manual. The Teredo server when the Mode is Teredo. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.6 | Columnipv6AddressEth3SendAdvertise | read-write | current | (Ethernet 3) When on, the Device Server will include the IPv6 address in router advertisements. |
| 1.3.6.1.4.1.1966.12.1.51.4.1.6 | Columnipv6TunnelGateway | read-write | current | The interface that the Device Server is going to use to access the Remote Host. The list is comprised of the Ethernet interface(s), the line names configured f… |
| 1.3.6.1.4.1.1966.12.1.52 | Nodel2tpInfo | |||
| 1.3.6.1.4.1.1966.12.1.52.1 | Scalarl2tpStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.52.2 | Scalarl2tpIpsec | read-write | current | When on, listens for L2TP/IPsec VPN tunnel connections. Note: to allow non-VPN tunnel connections to the Device Server, you must create entries in the VPN Exce… |
| 1.3.6.1.4.1.1966.12.1.52.3 | Scalarl2tpAuthMethod | read-write | current | The type of authentication Method that the L2TP IPsec tunnel will use. |
| 1.3.6.1.4.1.1966.12.1.52.4 | Scalarl2tpSecret | read-write | current | The L2TP/IPsec and IPsec tunnel secret. This applies to all Shared Secret VPN tunnels. |
| 1.3.6.1.4.1.1966.12.1.52.5 | Scalarl2tpIpsecLocalIpAddr | read-write | current | The IPv4 address that the Device Server will listen on for L2TP/IPsec connections. If the default value (0.0.0.0) is kept, the Device Server will use the Defau… |
| 1.3.6.1.4.1.1966.12.1.52.6 | Scalarl2tpCountry | read-write | current | A two character country code; for example, US. |
| 1.3.6.1.4.1.1966.12.1.52.7 | Scalarl2tpStateProv | read-write | current | Up to a 128 character entry for the state/province; for example, IL. |
| 1.3.6.1.4.1.1966.12.1.52.8 | Scalarl2tpLocality | read-write | current | Up to a 128 character entry for the location; for example, a city. |
| 1.3.6.1.4.1.1966.12.1.52.9 | Scalarl2tpOrganisation | read-write | current | Up to a 64 character entry for the organization; for example, Accounting. |
| 1.3.6.1.4.1.1966.12.1.52.10 | Scalarl2tpOrganisationUnit | read-write | current | Up to a 64 character entry for the unit in the organization; for example, Payroll. |
| 1.3.6.1.4.1.1966.12.1.52.11 | Scalarl2tpCommonName | read-write | current | Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. |
| 1.3.6.1.4.1.1966.12.1.52.12 | Scalarl2tpEmail | read-write | current | Up to a 64 character entry for an email address; for example, acct@anycompany.com. |
| 1.3.6.1.4.1.1966.12.1.52.13 | Scalarl2tpPPPLocalIpAddr | read-write | current | Specify the unique IPv4 address that hosts accessing the Device Server through the L2TP tunnel will use. |
| 1.3.6.1.4.1.1966.12.1.52.14 | Scalarl2tpPPPRemoteStartIpAddr | read-write | current | Specify the first IPv4 address that can be assigned to incoming hosts through the L2TP tunnel. |
| 1.3.6.1.4.1.1966.12.1.52.15 | Scalarl2tpPPPRemoteEndIpAddr | read-write | current | Specify the end range of the IPv4 addresses that can be assigned to incoming hosts through the L2TP tunnel. |
| 1.3.6.1.4.1.1966.12.1.52.16 | Scalarl2tpPap | read-write | current | Use the PAP authentication method that will be used for the L2TP tunnel. |
| 1.3.6.1.4.1.1966.12.1.52.17 | Scalarl2tpChap | read-write | current | Use the CHAP authentication method that will be used for the L2TP tunnel. This is the default. |
| 1.3.6.1.4.1.1966.12.1.53 | NodevpnexceptionInfo | |||
| 1.3.6.1.4.1.1966.12.1.53.1 | TablevpnexceptionTable | not-accessible | current | vpnexceptionTable |
| 1.3.6.1.4.1.1966.12.1.53.1.1 | RowvpnexceptionEntry | not-accessible | current | vpnexceptionEntry |
| 1.3.6.1.4.1.1966.12.1.53.1.1.1 | ColumnvpnexceptionIndex | not-accessible | current | vpnexceptionIndex |
| 1.3.6.1.4.1.1966.12.1.53.1.1.2 | ColumnvpnexceptionStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.53.1.1.3 | ColumnvpnexceptionIpAddress | read-write | current | The IPv4 or IPv6 address of the host or network that will communicate with the Device Server outside of the VPN tunnel. |
| 1.3.6.1.4.1.1966.12.1.53.1.1.4 | ColumnvpnexceptionPrefixBits | read-write | current | The IPv4 subnet bits or IPv6 prefix bits for the network. 0-128. |
| 1.3.6.1.4.1.1966.12.1.54 | NodehttpTunInfo | |||
| 1.3.6.1.4.1.1966.12.1.54.1 | NodehttpTunCfg | |||
| 1.3.6.1.4.1.1966.12.1.54.1.1 | NodehttpTunTunnelCfg | |||
| 1.3.6.1.4.1.1966.12.1.54.1.1.1 | TablehttpTunTunnelCfgTable | not-accessible | current | The httpTunTunnelCfg table. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1 | RowhttpTunTunnelCfgEntry | not-accessible | current | An entry in the httpTunTunnelCfgEntry, each relating to a tunnel. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.1 | ColumnhttpTunTunnelCfgIndex | not-accessible | current | The table entry number for this tunnel. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.2 | ColumnhttpTunTunnelCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.3 | ColumnhttpTunTunnelCfgValid | read-write | current | Specifies whether this tunnel is valid or not. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.4 | ColumnhttpTunTunnelCfgName | read-write | current | The name of this tunnel. Tunnel names should be unique. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.5 | ColumnhttpTunTunnelCfgMode | read-write | current | Specifies whether this tunnel endpoint should listen or connect. A functional HTTP tunnel consists of two endpoints: a listener and a connecter. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.6 | ColumnhttpTunTunnelCfgConnectHost | read-write | current | For tunnels in connect mode, specifies the remote host to connect to. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.7 | ColumnhttpTunTunnelCfgConnectUseProxy | read-write | current | For tunnels in connect mode, specifies whether to use an HTTP proxy. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.8 | ColumnhttpTunTunnelCfgListenRestrictIp | read-write | current | For tunnels in listen mode, specifies whether to restrict the other tunnel endpoint to a fixed IP address. Use 0.0.0.0 for no restriction |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.9 | ColumnhttpTunTunnelCfgHttps | read-write | current | Specifies whether this tunnel should use HTTPS for communication. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.10 | ColumnhttpTunTunnelCfgRestrictAccess | read-write | current | Specifies whether this tunnel should restrict access to local connections. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.11 | ColumnhttpTunTunnelCfgSecret | read-write | current | Specifies the shared secret for this tunnel. If the shared secret blank, the tunnel will be unauthenticated. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2 | NodehttpTunProxyCfg | |||
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1 | NodehttpTunProxyBasic | |||
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.1 | ScalarhttpTunProxyBasicStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.2 | ScalarhttpTunProxyHost | read-write | current | The hostname/IP address of the HTTP proxy. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.3 | ScalarhttpTunProxyPort | read-write | current | The port number for connecting to the HTTP proxy. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.4 | ScalarhttpTunProxyUser | read-write | current | The username for the HTTP proxy, if authentication is required. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.5 | ScalarhttpTunProxyPassword | read-write | current | The password for the HTTP proxy, if authentication is required. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.6 | ScalarhttpTunProxyDomain | read-write | current | The NTLM domain for the HTTP proxy. This is only required if the proxy is using NTLM authentication. |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.2 | NodehttpTunProxyAdv | |||
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.2.1 | ScalarhttpTunProxyAdvStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.2.2 | ScalarhttpTunProxyKeepaliveInterval | read-write | current | Keepalive interval for HTTP tunneling, in seconds |
| 1.3.6.1.4.1.1966.12.1.54.1.1.2.2.3 | ScalarhttpTunProxyMaxConnectionAge | read-write | current | Maximum connection age for HTTP tunneling, in minutes. |
| 1.3.6.1.4.1.1966.12.1.54.1.2 | NodehttpTunConnectionCfg | |||
| 1.3.6.1.4.1.1966.12.1.54.1.2.1 | TablehttpTunConnectionCfgTable | not-accessible | current | The httpTunConnectionCfg table. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1 | RowhttpTunConnectionCfgEntry | not-accessible | current | An entry in the httpTunConnectionCfgEntry, each relating to a Connection. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.1 | ColumnhttpTunConnectionCfgIndex | not-accessible | current | The table entry number for this Connection. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.2 | ColumnhttpTunConnectionCfgStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.3 | ColumnhttpTunConnectionCfgValid | read-write | current | Specifies whether this Connection is valid or not. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.4 | ColumnhttpTunConnectionCfgTunnelName | read-write | current | The name of the tunnel associated with this connection. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.5 | ColumnhttpTunConnectionCfgProtocol | read-write | current | The protocol used by this connection. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.6 | ColumnhttpTunConnectionCfgDestinationHost | read-write | current | The destination host for this connection. Application traffic tunneled in this connection will be forwarded to this host. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.7 | ColumnhttpTunConnectionCfgDestinationPort | read-write | current | The destination port for this connection. Application traffic tunneled in this connection will be forwarded to this TCP/UDP port. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.8 | ColumnhttpTunConnectionCfgLocalPort | read-write | current | The local listening port for this connection. Application that wish to use this tunnel/connection should connect to this TCP/UDP port on the device server. |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.9 | ColumnhttpTunConnectionCfgLocalIpAlias | read-write | current | (Optional) Specifies the local IP alias for this connection. If specified, application who wish to use this tunnel/connection can connect to the local IP alias… |
| 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.10 | ColumnhttpTunConnectionCfgRestrictAccess | read-write | current | Specifies whether to restrict access to local application traffic only. |
| 1.3.6.1.4.1.1966.12.1.54.2 | NodehttpTunStats | |||
| 1.3.6.1.4.1.1966.12.1.54.2.1 | NodehttpTunTunnelStats | |||
| 1.3.6.1.4.1.1966.12.1.54.2.1.1 | TablehttpTunTunnelStatsTable | not-accessible | current | The httpTunTunnelStats table. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1 | RowhttpTunTunnelStatsEntry | not-accessible | current | An entry in the httpTunTunnelStatsEntry, each relating to a tunnel. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.1 | ColumnhttpTunTunnelStatsIndex | not-accessible | current | The table entry number for this tunnel. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.2 | ColumnhttpTunTunnelStatsName | read-only | current | The name of this tunnel. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.3 | ColumnhttpTunTunnelStatsMode | read-only | current | Specifies whether this tunnel endpoint is listening or connecting. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.4 | ColumnhttpTunTunnelStatsConnectHost | read-only | current | For tunnels in connect mode, specifies the remote host to connect to. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.5 | ColumnhttpTunTunnelStatsConnected | read-only | current | Specifies whether this tunnel is connected. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.6 | ColumnhttpTunTunnelStatsHttps | read-only | current | Specifies whether this tunnel is using HTTPS for communication. |
| 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.7 | ColumnhttpTunTunnelStatsAuthFailed | read-only | current | Specifies whether authentication failed for this tunnel. |
| 1.3.6.1.4.1.1966.12.1.54.2.2 | NodehttpTunConnectionStats | |||
| 1.3.6.1.4.1.1966.12.1.54.2.2.1 | TablehttpTunConnectionStatsTable | not-accessible | current | The httpTunConnectionStats table. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1 | RowhttpTunConnectionStatsEntry | not-accessible | current | An entry in the httpTunConnectionStatsEntry, each relating to a Connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.1 | ColumnhttpTunConnectionStatsIndex | not-accessible | current | The table entry number for this connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.2 | ColumnhttpTunConnectionStatsTunnelName | read-only | current | The name of the tunnel associated with this connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.3 | ColumnhttpTunConnectionStatsType | read-only | current | The type of connection: direct - Originating from this end of tunnel reverse - Originating from other end of tunnel |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.4 | ColumnhttpTunConnectionStatsProtocol | read-only | current | The protocol used by this connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.5 | ColumnhttpTunConnectionStatsDestinationIp | read-only | current | The destination IP for this connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.6 | ColumnhttpTunConnectionStatsDestinationPort | read-only | current | The destination port for this connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.7 | ColumnhttpTunConnectionStatsSourceIp | read-only | current | The source (originating) IP for this connection. |
| 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.8 | ColumnhttpTunConnectionStatsLocalPort | read-only | current | The local listening port for this connection. |
| 1.3.6.1.4.1.1966.12.1.55 | NodesftpInfo | |||
| 1.3.6.1.4.1.1966.12.1.55.1 | ScalarsftpStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.55.2 | ScalarsftpCompression | read-write | current | Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks |
| 1.3.6.1.4.1.1966.12.1.55.3 | ScalarsftpAutoLogin | read-write | current | Creates an automatic SFTP authentication, using the Name and Password values. |
| 1.3.6.1.4.1.1966.12.1.55.4 | ScalarsftpName | read-write | current | The name of the user on the SFTP server. |
| 1.3.6.1.4.1.1966.12.1.55.5 | ScalarsftpPassword | read-write | current | The user's password on the SFTP server. |
| 1.3.6.1.4.1.1966.12.1.55.6 | ScalarsftpHost | read-write | current | The name of the SFTP host. |
| 1.3.6.1.4.1.1966.12.1.55.7 | ScalarsftpTunnelName | read-write | current | The name of the HTTP tunnel associated with this service. |
| 1.3.6.1.4.1.1966.12.1.55.8 | ScalarsftpProtocol | read-write | current | Specify the SSH client version that will be used with the SFTP server. |
| 1.3.6.1.4.1.1966.12.1.55.9 | ScalarsftpRSA | read-write | current | An authentication method used by SSH version 1 and 2. Use RSA authentication for the SFTP server. |
| 1.3.6.1.4.1.1966.12.1.55.10 | ScalarsftpDSA | read-write | current | An authentication method used by SSH version 2. Use DSA authentication for the SFTP server. |
| 1.3.6.1.4.1.1966.12.1.55.11 | ScalarsftpKeyboard | read-write | current | The user types in a password for authentication. |
| 1.3.6.1.4.1.1966.12.1.55.12 | ScalarsftpCipherSSH1 | read-write | current | Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish |
| 1.3.6.1.4.1.1966.12.1.55.13 | ScalarsftpFirstSSH2Cipher | read-write | current | Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES… |
| 1.3.6.1.4.1.1966.12.1.55.14 | ScalarsftpSecondSSH2Cipher | read-write | current | Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.55.15 | ScalarsftpThirdSSH2Cipher | read-write | current | Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.55.16 | ScalarsftpFourthSSH2Cipher | read-write | current | Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfi… |
| 1.3.6.1.4.1.1966.12.1.55.17 | ScalarsftpFifthSSH2Cipher | read-write | current | Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfis… |
| 1.3.6.1.4.1.1966.12.1.56 | NodewlanInfo | |||
| 1.3.6.1.4.1.1966.12.1.56.1 | NodewlanCfg | |||
| 1.3.6.1.4.1.1966.12.1.56.1.1 | NodewlanGlobalCfg | |||
| 1.3.6.1.4.1.1966.12.1.56.1.1.1 | ScalarwlanGlobalStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.56.1.1.2 | ScalarwlanGlobalRegion | read-write | current | The name of the region where the WIFI is being used. Valid regions are: US-Canada, EU, or Japan |
| 1.3.6.1.4.1.1966.12.1.56.1.1.3 | ScalarwlanGlobalMode | read-write | current | The Wi-Fi operating mode. disabled: Wi-Fi is disabled client: In this mode, the IOLAN can connect to an access point. softap: In this mode, the IOLAN acts as a… |
| 1.3.6.1.4.1.1966.12.1.56.1.1.4 | ScalarwlanGlobalRadioBand | read-write | current | The radio bands to use. bandBoth: use both 2.4GHz and 5GHz bands band2g4: use 2.4GHz band only band5g: use 5GHz band only |
| 1.3.6.1.4.1.1966.12.1.56.1.1.5 | ScalarwlanGlobalWps | read-write | current | Enable/disable WPS. |
| 1.3.6.1.4.1.1966.12.1.56.1.1.6 | ScalarwlanGlobalPassiveScan | read-write | current | Enable/disable passive scan only. |
| 1.3.6.1.4.1.1966.12.1.56.1.1.7 | ScalarwlanGlobalRoaming | read-write | current | Enable/disable roaming. |
| 1.3.6.1.4.1.1966.12.1.56.1.1.8 | ScalarwlanGlobalRoamingDecision | read-write | current | This controls how the IOLAN scans for a better access point within the same ESSID network. |
| 1.3.6.1.4.1.1966.12.1.56.1.1.9 | ScalarwlanGlobalRoamingOutOfRangeScanInterval | read-write | current | The time in seconds, between fast roaming scans. |
| 1.3.6.1.4.1.1966.12.1.56.1.1.10 | ScalarwlanGlobalRoamingInRangeScanInterval | read-write | current | The time in seconds, between slow roaming scans. |
| 1.3.6.1.4.1.1966.12.1.56.1.1.11 | ScalarwlanGlobalAntennaDiveristyMrc | read-write | current | Enable/disable antenna diversity/MRC. |
| 1.3.6.1.4.1.1966.12.1.56.1.2 | NodewlanProfilesCfg | |||
| 1.3.6.1.4.1.1966.12.1.56.1.2.1 | TablewlanProfileTable | not-accessible | current | The WLAN profile table. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1 | RowwlanProfileEntry | not-accessible | current | An entry in the wlanProfileEntry, each relating to a WLAN profile. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.1 | ColumnwlanProfileIndex | not-accessible | current | The table entry number for this user. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.2 | ColumnwlanProfileStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.3 | ColumnwlanProfileEnable | read-write | current | Only enabled profiles are considered for association with access points. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.4 | ColumnwlanProfileConnectPriority | read-write | current | The connect priority which the IOLAN uses when attempting to connect to an access point. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.5 | ColumnwlanProfileName | read-write | current | The name for this profile. To delete the profile, set this field to blank. If blank, this entry is currently unused. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.6 | ColumnwlanProfileSsid | read-write | current | The SSID for this profile. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.7 | ColumnwlanProfileScanBand | read-write | current | This profile is considered only if the access point is using the selected band. bandBoth: either 2.4GHz or 5GHz bands band2g4: 2.4GHz band band5g: 5GHz band |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.8 | ColumnwlanProfileScanDfs | read-write | current | Enable/disable scanning of DFS channels. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.9 | ColumnwlanProfileHiddenSsid | read-write | current | Specify whether the access point hides (Yes) or broadcasts (No) the SSID. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.10 | ColumnwlanProfileSecurityType | read-write | current | The security type to use. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.11 | ColumnwlanProfileEncryptionType | read-write | current | The encryption type to use. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.12 | ColumnwlanProfileOpenSharedWepKey1 | read-write | current | WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case … |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.13 | ColumnwlanProfileOpenSharedWepKey2 | read-write | current | WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case … |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.14 | ColumnwlanProfileOpenSharedWepKey3 | read-write | current | WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case … |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.15 | ColumnwlanProfileOpenSharedWepKey4 | read-write | current | WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case … |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.16 | ColumnwlanProfileOpenSharedWepTxKeyIndex | read-write | current | The index of the WEP key to use for encrypting transmitted data. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.17 | ColumnwlanProfilePersonalSecurityKey | read-write | current | Passphrase/key to use for encrypting the data. 8-63 case sensitive characters or 64 hexadecimal characters. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.18 | ColumnwlanProfileEnterpriseUsername | read-write | current | The username to use for authentication. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.19 | ColumnwlanProfileEnterprisePassword | read-write | current | The password to use for authentication. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.20 | ColumnwlanProfileEnterpriseValidateCert | read-write | current | Enable/disable validation of the server certificate. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.21 | ColumnwlanProfileEnterpriseAuthMethod | read-write | current | Authentication method. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.22 | ColumnwlanProfileEnterpriseAuthProtocol | read-write | current | Authentication protocol. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.23 | ColumnwlanProfileEnterpriseRoamingIdentity | read-write | current | Roaming identity. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.24 | ColumnwlanProfile8021xUsername | read-write | current | The username to use for authentication. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.25 | ColumnwlanProfile8021xPassword | read-write | current | The password to use for authentication. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.26 | ColumnwlanProfile8021xValidateCert | read-write | current | Enable/disable validation of the server certificate. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.27 | ColumnwlanProfile8021xAuthMethod | read-write | current | Authentication method. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.28 | ColumnwlanProfile8021xAuthProtocol | read-write | current | Authentication protocol. |
| 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.29 | ColumnwlanProfile8021xRoamingIdentity | read-write | current | Roaming identity. |
| 1.3.6.1.4.1.1966.12.1.56.1.3 | NodewlanSoftapCfg | |||
| 1.3.6.1.4.1.1966.12.1.56.1.3.1 | ScalarwlanSoftapStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.56.1.3.2 | ScalarwlanSoftapSSID | read-write | current | The IOLAN's SSID. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.3 | ScalarwlanSoftapChannel | read-write | current | The channel to use for softap mode. 2.5GHz: 1-11 5GHz: 36, 40, 44, 48 |
| 1.3.6.1.4.1.1966.12.1.56.1.3.4 | ScalarwlanSoftapSecurityType | read-write | current | The security type to use. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.5 | ScalarwlanSoftapEncryptionType | read-write | current | The encryption type to use. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.6 | ScalarwlanSoftapSecurityKey | read-write | current | The security key for WPA2-Personal/WPA-Personal. 8-63 case sensitive characters or 64 hexadecimal characters |
| 1.3.6.1.4.1.1966.12.1.56.1.3.7 | ScalarwlanSoftapIpAddress | read-write | current | The IP address of the IOLAN's WLAN interface when in softap mode. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.8 | ScalarwlanSoftapSubnetBits | read-write | current | The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 1-32. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.9 | ScalarwlanSoftapDhcp | read-write | current | Enable/disable DHCP for softap mode. When enabled, DHCP will assign an IP address to connecting devices. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.10 | ScalarwlanSoftapDhcpIpPoolAddress | read-write | current | The DHCP pool starting IP address. |
| 1.3.6.1.4.1.1966.12.1.56.1.3.11 | ScalarwlanSoftapDhcpSubnetBits | read-write | current | The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 1-32. |
| 1.3.6.1.4.1.1966.12.1.56.2 | NodewlanStats | |||
| 1.3.6.1.4.1.1966.12.1.56.2.1 | ScalarwlanStatsMode | read-only | current | The WLAN operating mode. |
| 1.3.6.1.4.1.1966.12.1.56.2.2 | ScalarwlanStatsConnected | read-only | current | Connected status varies depending on operating mode. Mode Disabled: No Client: Yes/No Soft-AP: # of connected clients |
| 1.3.6.1.4.1.1966.12.1.56.2.3 | ScalarwlanStatsProfile | read-only | current | In client mode, the WLAN profile corresponding to the currently connected access point. |
| 1.3.6.1.4.1.1966.12.1.56.2.4 | ScalarwlanStatsSsid | read-only | current | In Client mode, this is the SSID of the currently connected access point. In Soft-AP mode, this is the SSID of the IOLAN. |
| 1.3.6.1.4.1.1966.12.1.56.2.5 | ScalarwlanStatsBssid | read-only | current | In Client mode, this is the BSSID of the currently connected access point. In Soft-AP mode, this is the BSSID of the last connected client. |
| 1.3.6.1.4.1.1966.12.1.56.2.6 | ScalarwlanStatsChannel | read-only | current | The channel currently being used in Client and Soft-AP mode. |
| 1.3.6.1.4.1.1966.12.1.56.2.7 | ScalarwlanStatsRssi | read-only | current | The power level of the received signal in dBm. |
| 1.3.6.1.4.1.1966.12.1.56.2.8 | ScalarwlanStatsIpAddress | read-only | current | The current IP address of the IOLAN's WLAN interface. |
| 1.3.6.1.4.1.1966.12.1.56.2.9 | ScalarwlanStatsTxRate | read-only | current | The current transmit rate. |
| 1.3.6.1.4.1.1966.12.1.56.2.10 | ScalarwlanStatsRegion | read-only | current | The currently configured operating region. |
| 1.3.6.1.4.1.1966.12.1.56.2.11 | ScalarwlanStatsSecurityType | read-only | current | The security type used in the current connection. |
| 1.3.6.1.4.1.1966.12.1.56.2.12 | ScalarwlanStatsEncryptionType | read-only | current | The encryption used in the current connection. |
| 1.3.6.1.4.1.1966.12.1.56.2.13 | ScalarwlanStatsPairwiseCipher | read-only | current | The pairwise cipher used in the current connection. |
| 1.3.6.1.4.1.1966.12.1.56.2.14 | ScalarwlanStatsGroupCipher | read-only | current | The group cipher used in the current connection. |
| 1.3.6.1.4.1.1966.12.1.57 | NodewwanInfo | |||
| 1.3.6.1.4.1.1966.12.1.57.1 | NodewwanCfg | |||
| 1.3.6.1.4.1.1966.12.1.57.1.1 | ScalarwwanGlobalStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.57.1.2 | ScalarwwanEnable | read-write | current | Enable/disable WWAN |
| 1.3.6.1.4.1.1966.12.1.57.1.3 | ScalarwwanApn | read-write | current | The APN required by your service provider to access the network. |
| 1.3.6.1.4.1.1966.12.1.57.1.4 | ScalarwwanAuthentication | read-write | current | The authentication method required by your service provider. |
| 1.3.6.1.4.1.1966.12.1.57.1.5 | ScalarwwanUsername | read-write | current | The username required by your service provider if the authentication method is PAP or CHAP. |
| 1.3.6.1.4.1.1966.12.1.57.1.6 | ScalarwwanPassword | read-write | current | The password required by your service provider if the authentication method is PAP or CHAP. |
| 1.3.6.1.4.1.1966.12.1.57.1.7 | ScalarwwanPin | read-write | current | The PIN required to unlock a PIN protected SIM. |
| 1.3.6.1.4.1.1966.12.1.57.1.8 | ScalarwwanRadioAccessTechnology | read-write | current | The radio access technology of the network to connect to. |
| 1.3.6.1.4.1.1966.12.1.57.1.9 | ScalarwwanAutoDns | read-write | current | If enabled, the DNS server IP address will be retrieved automatically from the network. |
| 1.3.6.1.4.1.1966.12.1.57.2 | NodewwanStats | |||
| 1.3.6.1.4.1.1966.12.1.57.2.1 | ScalarwwanStatsModemModel | read-only | current | The modem model. |
| 1.3.6.1.4.1.1966.12.1.57.2.2 | ScalarwwanStatsModemFirmwareVersion | read-only | current | The modem firmware version. |
| 1.3.6.1.4.1.1966.12.1.57.2.3 | ScalarwwanStatsIMEI | read-only | current | The identifier of the modem. |
| 1.3.6.1.4.1.1966.12.1.57.2.4 | ScalarwwanStatsICCID | read-only | current | The identifier of the actual SIM card itself. |
| 1.3.6.1.4.1.1966.12.1.57.2.5 | ScalarwwanStatsIMSI | read-only | current | A unique identifier that defines a subscriber in the wireless world, including the country and mobile network to which the subscriber belongs. |
| 1.3.6.1.4.1.1966.12.1.57.2.6 | ScalarwwanStatsPinRetryCounter | read-only | current | The number of retries remaining for the SIM PIN. |
| 1.3.6.1.4.1.1966.12.1.57.2.7 | ScalarwwanStatsNetworkType | read-only | current | The radio access technology used to connect to the network. |
| 1.3.6.1.4.1.1966.12.1.57.2.8 | ScalarwwanStatsNetworkStatus | read-only | current | The network connection status. |
| 1.3.6.1.4.1.1966.12.1.57.2.9 | ScalarwwanStatsNetworkName | read-only | current | The name of the connected network. |
| 1.3.6.1.4.1.1966.12.1.57.2.10 | ScalarwwanStatsAPN | read-only | current | The APN used to connect to the network. |
| 1.3.6.1.4.1.1966.12.1.57.2.11 | ScalarwwanStatsSignalStrength | read-only | current | The strength of the network signal. |
| 1.3.6.1.4.1.1966.12.1.57.2.12 | ScalarwwanStatsIpAddress | read-only | current | The current IP address of the IOLAN's WWAN interface. |
| 1.3.6.1.4.1.1966.12.1.57.2.13 | ScalarwwanStatsRxBytes | read-only | current | RX byte count. |
| 1.3.6.1.4.1.1966.12.1.57.2.14 | ScalarwwanStatsTxBytes | read-only | current | TX byte count. |
| 1.3.6.1.4.1.1966.12.1.58 | NodesfpInfo | |||
| 1.3.6.1.4.1.1966.12.1.58.1 | TablesfpModuleTable | not-accessible | current | Table of SFP information for Optical Transceivers |
| 1.3.6.1.4.1.1966.12.1.58.1.1 | RowsfpModuleEntry | not-accessible | current | Entries of the table, each relating to a separate SFP module. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.1 | ColumnsfpInterfaceIndex | not-accessible | current | The Ethernet interface number. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.2 | ColumnsfpStatus | read-only | current | This object identifies the status of the SFP module. If sfpCommFailed value is set then the rest of the data in this entry is invalid 0x80 - sfpModuleInserted … |
| 1.3.6.1.4.1.1966.12.1.58.1.1.3 | ColumnsfpVendorSerialNumber | read-only | current | This object identifies the SFP's vendor serial number. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.4 | ColumnsfpVendorName | read-only | current | This object identifies the SFP's vendor company name. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.5 | ColumnsfpVendorPartNumber | read-only | current | This object identifies the SFP's vendor part number. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.6 | ColumnsfpConnectorType | read-only | current | This object identifies the SFP connector type. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.7 | ColumnsfpNominalBitRate | read-only | current | This object identifies the SFP nominal bit rate of fiber interface, in megabits per second. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.8 | ColumnsfpLinkReach9125 | read-only | current | This object identifies the SFP DMI maximum length in meters of media supported by the fiber transceiver for 9 micron (125 micron jacket) single-mode fiber. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.9 | ColumnsfpLinkReach50125 | read-only | current | This object identifies the SFP maximum length in meters of media supported by the fiber transceiver for 50 micron (125 micron jacket) multi-mode fiber. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.10 | ColumnsfpLinkReach625125 | read-only | current | This object identifies the SFP maximum length in meters of media supported by the fiber transceiver for 62.5 micron (125 micron jacket) multi-mode fiber. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.11 | ColumnsfpReachCopper | read-only | current | This object identifies the maximum length in meters that is supported by the SFP/XFP interface using copper cable. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.12 | ColumnsfpFiberWaveLength | read-only | current | This object identifies the wavelength of the fiber interface's optical transceiver, in nanometers. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.13 | ColumnsfpDmiCurrentTempState | read-only | current | This object identifies the current alarm status for SFP DMI internally measured temperature. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.14 | ColumnsfpDmiRealTimeTemp | read-only | current | This object identifies the SFP DMI real time temperature. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.15 | ColumnsfpDmiHighTempWarn | read-only | current | This object identifies the SFP DMI high temperature warning threshold. The value displayed will be either Celsius or Fahrenheit based on your current regional … |
| 1.3.6.1.4.1.1966.12.1.58.1.1.16 | ColumnsfpDmiHighTempAlarm | read-only | current | This object identifies the SFP DMI high temperature warning threshold. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.17 | ColumnsfpDmiLowTempWarn | read-only | current | This object identifies the SFP DMI high temperature warning threshold. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.18 | ColumnsfpDmiLowTempAlarm | read-only | current | This object identifies the SFP DMI high temperature warning threshold. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.19 | ColumnsfpDmiCurrentVoltState | read-only | current | This object identifies current alarm status for SFP DMI internally measured voltage. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.20 | ColumnsfpDmiRealTimeVolt | read-only | current | This object identifies the SFP DMI real time voltage in Volts. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.21 | ColumnsfpDmiHighVoltWarn | read-only | current | This object identifies the SFP DMI high voltage warning threshold in Volts |
| 1.3.6.1.4.1.1966.12.1.58.1.1.22 | ColumnsfpDmiHighVoltAlarm | read-only | current | This object identifies the SFP DMI high voltage warning threshold in Volts |
| 1.3.6.1.4.1.1966.12.1.58.1.1.23 | ColumnsfpDmiLowVoltWarn | read-only | current | This object identifies the SFP DMI high voltage warning threshold in Volts |
| 1.3.6.1.4.1.1966.12.1.58.1.1.24 | ColumnsfpDmiLowVoltAlarm | read-only | current | This object identifies the SFP DMI high voltage warning threshold in Volts |
| 1.3.6.1.4.1.1966.12.1.58.1.1.25 | ColumnsfpDmiCurrentTxBiasState | read-only | current | This object identifies current alarm status for SFP DMI internally measured transmit bias current in milliamps. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.26 | ColumnsfpDmiRealTimeTxBias | read-only | current | This object identifies the SFP DMI high TX Bias current in milliamps. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.27 | ColumnsfpDmiHighTxBiasWarn | read-only | current | This object identifies the SFP DMI high TX Bias current warning threshold in milliamps. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.28 | ColumnsfpDmiHighTxBiasAlarm | read-only | current | This object identifies the SFP DMI high TX Bias current alarm threshold in milliamps. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.29 | ColumnsfpDmiLowTxBiasWarn | read-only | current | This object identifies the SFP DMI low TX Bias current warning threshold in milliamps. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.30 | ColumnsfpDmiLowTxBiasAlarm | read-only | current | This object identifies the SFP DMI low TX Bias current alarm threshold in milliamps. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.31 | ColumnsfpDmiCurrentTxPowerState | read-only | current | This object identifies current alarm status for SFP DMI internally measured transmit power. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.32 | ColumnsfpDmiRealTimeTxPower | read-only | current | This object identifies the SFP DMI real time TX output power. The value displayed will be either millwatts or Dbm based on your current regional display settin… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.33 | ColumnsfpDmiHighTxPowerWarn | read-only | current | This object identifies the SFP DMI high TX output power warning threshold. The value displayed will be either millwatts or Dbm based on your current regional d… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.34 | ColumnsfpDmiHighTxPowerAlarm | read-only | current | This object identifies the SFP DMI high TX output power alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional dis… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.35 | ColumnsfpDmiLowTxPowerWarn | read-only | current | This object identifies the SFP DMI low TX output power warning threshold. The value displayed will be either millwatts or Dbm based on your current regional di… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.36 | ColumnsfpDmiLowTxPowerAlarm | read-only | current | This object identifies the SFP DMI low TX output power alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional disp… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.37 | ColumnsfpDmiCurrentRxPowerState | read-only | current | This object identifies current alarm status for SFP DMI internally measured receive power. |
| 1.3.6.1.4.1.1966.12.1.58.1.1.38 | ColumnsfpDmiRealTimeRxPower | read-only | current | This object identifies the SFP DMI real time RX received optical power. The value displayed will be either millwatts or Dbm based on your current regional disp… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.39 | ColumnsfpDmiHighRxPowerWarn | read-only | current | This object identifies the SFP DMI high RX received optical warning threshold. The value displayed will be either millwatts or Dbm based on your current region… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.40 | ColumnsfpDmiHighRxPowerAlarm | read-only | current | This object identifies the SFP DMI high RX received optical alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.41 | ColumnsfpDmiLowRxPowerWarn | read-only | current | This object identifies the SFP DMI low RX received optical warning threshold. The value displayed will be either millwatts or Dbm based on your current regiona… |
| 1.3.6.1.4.1.1966.12.1.58.1.1.42 | ColumnsfpDmiLowRxPowerAlarm | read-only | current | This object identifies the SFP DMI low RX received optical alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional … |
| 1.3.6.1.4.1.1966.12.1.59 | NodefrontPanelInfo | |||
| 1.3.6.1.4.1.1966.12.1.59.1 | ScalarfpStatus | read-write | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic… |
| 1.3.6.1.4.1.1966.12.1.59.2 | ScalarfpLcdAutoScrollEnable | read-write | current | Defines whether the front panel LCD will auto-scroll the specified screens |
| 1.3.6.1.4.1.1966.12.1.59.3 | ScalarfpLcdScrollDelay | read-write | current | Defines the time between screens when auto-scroll is enabled. |
| 1.3.6.1.4.1.1966.12.1.59.4 | ScalarfpLcdIdleTimeout | read-write | current | Defines the time after a keypad key is pressed before the auto-scroll will resume. |
| 1.3.6.1.4.1.1966.12.1.59.5 | ScalarfpCustomTextLine1 | read-write | current | Defines line 1 of the custom text screen. |
| 1.3.6.1.4.1.1966.12.1.59.6 | ScalarfpCustomTextLine2 | read-write | current | Defines line 2 of the custom text screen. |
| 1.3.6.1.4.1.1966.12.1.59.7 | ScalarfpKeypadLock | read-write | current | Defines whether the front panel keypad is locked for editing functions |
| 1.3.6.1.4.1.1966.12.1.59.8 | ScalarfpKeypadPin | read-write | current | Request a Pin in order to have access to config and admin menus |
| 1.3.6.1.4.1.1966.12.1.59.9 | ScalarfpKeypadPinNumber | read-write | current | Specifies the 6 numeric character pin which is required to reset the front panel config to factory default. |
| 1.3.6.1.4.1.1966.12.1.59.10 | NodefpLcdScreenOrder | |||
| 1.3.6.1.4.1.1966.12.1.59.10.1 | ScalarfpLcdScreenOrder1 | read-write | current | Defines the which screen is displayed in order 1. |
| 1.3.6.1.4.1.1966.12.1.59.10.2 | ScalarfpLcdScreenOrder2 | read-write | current | Defines the which screen is displayed in order 2. |
| 1.3.6.1.4.1.1966.12.1.59.10.3 | ScalarfpLcdScreenOrder3 | read-write | current | Defines the which screen is displayed in order 3. |
| 1.3.6.1.4.1.1966.12.1.59.10.4 | ScalarfpLcdScreenOrder4 | read-write | current | Defines the which screen is displayed in order 4. |
| 1.3.6.1.4.1.1966.12.1.59.10.5 | ScalarfpLcdScreenOrder5 | read-write | current | Defines the which screen is displayed in order 5. |
| 1.3.6.1.4.1.1966.12.1.59.10.6 | ScalarfpLcdScreenOrder6 | read-write | current | Defines the which screen is displayed in order 6. |
| 1.3.6.1.4.1.1966.12.1.59.10.7 | ScalarfpLcdScreenOrder7 | read-write | current | Defines the which screen is displayed in order 7. |
| 1.3.6.1.4.1.1966.12.1.59.10.8 | ScalarfpLcdScreenOrder8 | read-write | current | Defines the which screen is displayed in order 8. |
| 1.3.6.1.4.1.1966.12.1.59.10.9 | ScalarfpLcdScreenOrder9 | read-write | current | Defines the which screen is displayed in order 9. |
| 1.3.6.1.4.1.1966.12.1.59.10.10 | ScalarfpLcdScreenOrder10 | read-write | current | Defines the which screen is displayed in order 10. |
| 1.3.6.1.4.1.1966.12.1.59.10.11 | ScalarfpLcdScreenOrder11 | read-write | current | Defines the which screen is displayed in order 11. |
| 1.3.6.1.4.1.1966.12.1.59.10.12 | ScalarfpLcdScreenOrder12 | read-write | current | Defines the which screen is displayed in order 12. |
| 1.3.6.1.4.1.1966.12.2 | NodesdsMIBNotifications | |||
| 1.3.6.1.4.1.1966.12.2.0 | NodesdsMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.1966.12.2.0.1 | NotificationsdsMIBIoDigitalInputAlarmSensor | current | A sdsMIBIoDigitalInputAlarmSensor trap signifies that the Digital I/O channel input sensor alarm has triggered. | |
| 1.3.6.1.4.1.1966.12.2.0.2 | NotificationsdsMIBIoLineInputDSRAlarm | current | A sdsMIBIoLineInputDSRAlarm trap signifies that the Serial line DSR input alarm has triggered. | |
| 1.3.6.1.4.1.1966.12.2.0.3 | NotificationsdsMIBIoLineInputDCDAlarm | current | A sdsMIBIoLineInputDCDAlarm trap signifies that the Serial line DCD input alarm has triggered. | |
| 1.3.6.1.4.1.1966.12.2.0.4 | NotificationsdsMIBIoLineInputCTSAlarm | current | A sdsMIBIoLineInputCTSAlarm trap signifies that the Serial line CTS input alarm has triggered. | |
| 1.3.6.1.4.1.1966.12.2.0.5 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel1 | current | A sdsMIBIoAnalogInputAlarmSeverityLevel1 trap signifies that the Analog I/O channel input alarm has triggered at severity level 1. | |
| 1.3.6.1.4.1.1966.12.2.0.6 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel2 | current | A sdsMIBIoAnalogInputAlarmSeverityLevel2 trap signifies that the Analog I/O channel input alarm has triggered at severity level 2. | |
| 1.3.6.1.4.1.1966.12.2.0.7 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel3 | current | A sdsMIBIoAnalogInputAlarmSeverityLevel3 trap signifies that the Analog I/O channel input alarm has triggered at severity level 3. | |
| 1.3.6.1.4.1.1966.12.2.0.8 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel4 | current | A sdsMIBIoAnalogInputAlarmSeverityLevel4 trap signifies that the Analog I/O channel input alarm has triggered at severity level 4. | |
| 1.3.6.1.4.1.1966.12.2.0.9 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel5 | current | A sdsMIBIoAnalogInputAlarmSeverityLevel5 trap signifies that the Analog I/O channel input alarm has triggered at severity level 5. | |
| 1.3.6.1.4.1.1966.12.2.0.10 | NotificationsdsMIBIoDigitalInputAlarmClear | current | A sdsMIBIoDigitalInputAlarmClear trap signifies that the Digital I/O channel input sensor alarm has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.11 | NotificationsdsMIBIoLineInputDSRAlarmClear | current | A sdsMIBIoLineInputDSRAlarmClear trap signifies that the Serial line DSR input alarm has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.12 | NotificationsdsMIBIoLineInputDCDAlarmClear | current | A sdsMIBIoLineInputDCDAlarmClear trap signifies that the Serial line DCD input alarm has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.13 | NotificationsdsMIBIoLineInputCTSAlarmClear | current | A sdsMIBIoLineInputCTSAlarmClear trap signifies that the Serial line CTS input alarm has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.14 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel1Clear | current | A sdsMIBIoAnalogInputAlarmSeverityLevel1Clear trap signifies that the Analog I/O channel input alarm at severity level 1 has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.15 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel2Clear | current | A sdsMIBIoAnalogInputAlarmSeverityLevel2Clear trap signifies that the Analog I/O channel input alarm at severity level 2 has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.16 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel3Clear | current | A sdsMIBIoAnalogInputAlarmSeverityLevel3Clear trap signifies that the Analog I/O channel input alarm at severity level 3 has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.17 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel4Clear | current | A sdsMIBIoAnalogInputAlarmSeverityLevel4Clear trap signifies that the Analog I/O channel input alarm at severity level 4 has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.18 | NotificationsdsMIBIoAnalogInputAlarmSeverityLevel5Clear | current | A sdsMIBIoAnalogInputAlarmSeverityLevel5Clear trap signifies that the Analog I/O channel input alarm at severity level 5 has cleared. | |
| 1.3.6.1.4.1.1966.12.2.0.19 | NotificationsdsMIBEthernetLinkDown | current | A sdsMIBEthernetLinkDown trap signifies that the sending SNMP application entity recognizes a failure in one of the communications links represented in the age… | |
| 1.3.6.1.4.1.1966.12.2.0.20 | NotificationsdsMIBEthernetLinkUp | current | A sdsMIBEthernetLinkUp trap signifies that the sending SNMP application entity has detected that one of the communications links has transitioned out of the do… | |
| 1.3.6.1.4.1.1966.12.3 | NodesdsMIBConformance | |||
| 1.3.6.1.4.1.1966.12.3.1 | NodesdsMIBCompliances | |||
| 1.3.6.1.4.1.1966.12.3.1.1 | CompliancesdsMIBCompliance | current | The compliance statement for sdsMIB which implement the Perle IOLAN SDS, SCS and STS MIB. | |
| 1.3.6.1.4.1.1966.12.3.2 | NodesdsMIBGroups | |||
| 1.3.6.1.4.1.1966.12.3.2.1 | GroupsdsMIBMainGroup | current | The group of objects for identifying and determining the configuration and current timeliness values of the Perle IOLAN SDS, SCS and STS. | |
| 1.3.6.1.4.1.1966.12.3.2.2 | GroupsdsMIBNotificationsGroup | current | The group of notifications which is implemented for the Perle IOLAN SDS, SCS and STS. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ContainerStatus | INTEGER { active(1), modified(2), applyChanges(4), discardChanges(6) } | current | When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
| Date | OCTET STRING (SIZE (8..10)) | current | A date specification. In the format dd/mm/yyyy field contents range 1 day 1..31 2 month 1..12 3 year* 0..65536 |
| GenericTableIndex | Integer32 (1..2147483647) | current | An arbitrary value that uniquely identifies the entity. The value should be a small, positive integer. Index values for different entities are not necessarily contiguous. |
| Hex32 | OCTET STRING (SIZE(4)) | current | Represents a four octet hex value. |
| Hex8 | OCTET STRING (SIZE(1)) | current | Represents a one byte octet hex value. |
| Ipv4v6Address | OCTET STRING (SIZE (0..255)) | current | An IPv4 or IPv6 address |
| Ipv6InterfaceId | OCTET STRING (SIZE (0..255)) | current | An IPv6 Interface Identifier. The first 64 bits must be 0 |
| OnOffValue | INTEGER { off(1), on(2) } | current | Represents an ON or OFF value. |
| PortNumber | Integer32 (1..49) | current | Serial Port/Line number. Valid values are 1 to maximum port number the Device Server supports |
| Time | OCTET STRING (SIZE (5..8)) | current | A time specification. In the format hh:mm:ss field contents range 1 hour 0..23 2 minutes 0..59 3 seconds 0..59 |
| TrueportBaud | INTEGER { b50(1), b75(2), b110(3), b134(4), b150(5), b200(6), b300(7), b600(8), b1200(9), b1800(10), b2400(11), b4800(12), b9600(13), b19200(14), b38400(15), b57600(16), b115200(17), b230400(18), b28800(23), bCustom(24) } | current | Represents TruePort baudrate mapping. |
| YesNoValue | INTEGER { no(1), yes(2) } | current | Represents a YES or NO value. |