MIB Viewer

PERLE-MCR-MGT-MIB

1864 objects
The private MIB module for the Perle Managed Media Converters
Imported Objects
SNMP-FRAMEWORK-MIBSnmpEngineID
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.1966Nodeperle
1.3.6.1.4.1.1966.20NodeproductId
1.3.6.1.4.1.1966.20.1NodemediaConverter
1.3.6.1.4.1.1966.20.1.1NodemcrMGT
1.3.6.1.4.1.1966.21NodeproductMIB
1.3.6.1.4.1.1966.21.1NodemediaconverterMIB
1.3.6.1.4.1.1966.21.1.1IdentitymcrMGTMIBThe private MIB module for the Perle Managed Media Converters
1.3.6.1.4.1.1966.21.1.1.0NodemcrMGTMIBNotifications
1.3.6.1.4.1.1966.21.1.1.0.1NotificationmcrMgtModuleInsertedcurrentTrap being sent indicates that a management module has been inserted int the chassis.
1.3.6.1.4.1.1966.21.1.1.0.2NotificationmcrMgtSystemBootcurrentTrap being sent indicates that the management module's system firmware is being booted up and has completed system initialization. In some case this alert will…
1.3.6.1.4.1.1966.21.1.1.0.3NotificationmcrMgtResetcurrentTrap being sent indicates that the management module has been manually reset via the reset button or one of the managers.
1.3.6.1.4.1.1966.21.1.1.0.4NotificationmcrMgtResetFactorycurrentTrap being sent indicates that the management module has been manually reset to factory by holding the reset button for 3 or more seconds, or one of the manage…
1.3.6.1.4.1.1966.21.1.1.0.5NotificationmcrMgtEtheLinkUpcurrentTrap being sent indicates that the current link status of the Ethernet port on the management module is up.
1.3.6.1.4.1.1966.21.1.1.0.6NotificationmcrMgtEtheLinkDowncurrentTrap being sent indicates that the current link status of the Ethernet port on the management module is down.
1.3.6.1.4.1.1966.21.1.1.0.7NotificationmcrMgtConMonDSRSigChgcurrentTrap being sent indicates that monitor console DSR is configured and the status of one of these signal has changed on the console port.
1.3.6.1.4.1.1966.21.1.1.0.8NotificationmcrMgtAuthFailcurrentTrap being sent indicates that a user failed authentication via Telnet, SSH, WebManager, SNMP or the serial console.
1.3.6.1.4.1.1966.21.1.1.0.9NotificationmcrMgtAuthSuccesscurrentTrap being sent indicates that a user failed authentication via Telnet, SSH, WebManager or the serial console.
1.3.6.1.4.1.1966.21.1.1.0.10NotificationmcrMgtDateTimeChgcurrentTrap being sent indicates that the system date and/or time has been changed.
1.3.6.1.4.1.1966.21.1.1.0.11NotificationmcrMgtSntpServFailcurrentTrap being sent indicates that SNTP is configured and the management module can not communicate with the configured SNTP server.
1.3.6.1.4.1.1966.21.1.1.0.12NotificationmcrMgtSntpServReccurrentTrap being sent indicates that the SNTP is configured and the management module has recovered communications with the configured SNTP server.
1.3.6.1.4.1.1966.21.1.1.0.13NotificationmcrMgtSnmpTrapHostFailcurrentTrap being sent indicates that SNMP traps is and the management module can not communicate with the configured SNMP trap host. This trap will only be sent for …
1.3.6.1.4.1.1966.21.1.1.0.14NotificationmcrMgtSnmpTrapHostReccurrentTrap being sent indicates that SNMP traps is and the management module has recovered communications with the configured SNMP trap host.
1.3.6.1.4.1.1966.21.1.1.0.15NotificationmcrMgtEmailServFailcurrentTrap being sent indicates that an alert email server is configured and the management module can not communicate with the configured email server.
1.3.6.1.4.1.1966.21.1.1.0.16NotificationmcrMgtEmailServReccurrentTrap being sent indicates that an alert email server is configured and the management module has recovered communications with the configured email server.
1.3.6.1.4.1.1966.21.1.1.0.17NotificationmcrMgtConfSavedFlashcurrentTrap being sent indicates that the configuration has been saved to flash on the management module.
1.3.6.1.4.1.1966.21.1.1.0.18NotificationmcrMgtIpAddrDynChgcurrentTrap being sent indicates that the system IP address has been dynamically changed.
1.3.6.1.4.1.1966.21.1.1.0.19NotificationmcrMgtTftpUploadFailcurrentTrap being sent indicates that an attempt to transfer a file via TFTP, off the management module to a remote host has failed.
1.3.6.1.4.1.1966.21.1.1.0.20NotificationmcrMgtTftpUploadSuccesscurrentTrap being sent indicates that an attempt to transfer a file via TFTP, off the management module to a remote host was successful.
1.3.6.1.4.1.1966.21.1.1.0.21NotificationmcrMgtTftpDownloadFailcurrentTrap being sent indicates that an attempt to transfer a file via TFTP, from a remote host to the management module has failed.
1.3.6.1.4.1.1966.21.1.1.0.22NotificationmcrMgtTftpDownloadSuccesscurrentTrap being sent indicates that an attempt to transfer a file via TFTP, from a remote host to the management module was successful.
1.3.6.1.4.1.1966.21.1.1.0.23NotificationmcrMgtChassisMismatchcurrentTrap being sent indicates that the management module has been inserted into a chassis that does not match it's Backup media converter module configuration. Bac…
1.3.6.1.4.1.1966.21.1.1.0.24NotificationmcrChassisAddcurrentTrap being sent indicates that a new chassis as been added to the chain of chassis.
1.3.6.1.4.1.1966.21.1.1.0.25NotificationmcrChassisRemovecurrentTrap being sent indicates that that a chassis has been removed from the chain of chassis.
1.3.6.1.4.1.1966.21.1.1.0.26NotificationmcrChassisResetcurrentTrap being sent indicates that the chassis back-plane has been manually reset by a user managing the unit.
1.3.6.1.4.1.1966.21.1.1.0.27NotificationmcrChassisTemperatureAlarmcurrentTrap being sent indicates that the chassis temperature has exceeded the configured high temperature threshold temperature.
1.3.6.1.4.1.1966.21.1.1.0.28NotificationmcrChassisTemperatureRecovercurrentTrap being sent indicates that the chassis temperature has recovered back to normal operating temperature.
1.3.6.1.4.1.1966.21.1.1.0.29NotificationmcrChassisSlotPoweredOncurrentTrap being sent indicates that the chassis slot has been powered off either manually or through the configured chassis slot power schedule.
1.3.6.1.4.1.1966.21.1.1.0.30NotificationmcrChassisSlotPoweredOffcurrentTrap being sent indicates that the chassis slot has been powered on either manually or through the configured chassis slot power schedule.
1.3.6.1.4.1.1966.21.1.1.0.31NotificationmcrChassisFailcurrentTrap being sent indicates that the management module has detected a failure condition in the chassis.
1.3.6.1.4.1.1966.21.1.1.0.32NotificationmcrChassisOkcurrentTrap being sent indicates that the chassis has recovered from a failure and is now operating normally.
1.3.6.1.4.1.1966.21.1.1.0.33NotificationmcrPsmuInsertedcurrentTrap being sent indicates that a power supply has been inserted into the chassis.
1.3.6.1.4.1.1966.21.1.1.0.34NotificationmcrPsmuRemovedcurrentTrap being sent indicates that a power supply's has been removed from the chassis.
1.3.6.1.4.1.1966.21.1.1.0.35NotificationmcrPsmuPsuFailcurrentTrap being sent indicates that the power supply has failed it's self-test diagnostics.
1.3.6.1.4.1.1966.21.1.1.0.36NotificationmcrPsmuPsuOkcurrentTrap being sent indicates that the power supply has passed it's self-test diagnostics.
1.3.6.1.4.1.1966.21.1.1.0.37NotificationmcrPsmuPsuVoltageFailcurrentTrap being sent indicates that the voltage being supplied by the indicated power supply is insufficient.
1.3.6.1.4.1.1966.21.1.1.0.38NotificationmcrPsmuPsuVoltageOkcurrentTrap being sent indicates that the voltage being supplied by the indicated power supply is now in the normal operating range.
1.3.6.1.4.1.1966.21.1.1.0.39NotificationmcrPsmuFanFailcurrentTrap being sent indicates that the fan has failed.
1.3.6.1.4.1.1966.21.1.1.0.40NotificationmcrPsmuFanOkcurrentTrap being sent indicates that the fan currently operating normally.
1.3.6.1.4.1.1966.21.1.1.0.42NotificationmcrMediaInsertedcurrentTrap being sent indicates that a media converter module has been inserted into the chassis.
1.3.6.1.4.1.1966.21.1.1.0.43NotificationmcrMediaRemovedcurrentTrap being sent indicates that a media converter module has been removed from the chassis.
1.3.6.1.4.1.1966.21.1.1.0.44NotificationmcrMediaResetcurrentTrap being sent indicates that the media converter module has been manually reset by a user managing the unit.
1.3.6.1.4.1.1966.21.1.1.0.45NotificationmcrMediaLostCommunicationcurrentTrap being sent indicates that the management module can no longer communicate with the media converter module
1.3.6.1.4.1.1966.21.1.1.0.46NotificationmcrMediaRecovCommunicationcurrentTrap being sent indicates that the management module recovered communication with a media converter module
1.3.6.1.4.1.1966.21.1.1.0.47NotificationmcrMediaFailcurrentTrap being sent indicates that the media converter module has failed its self-test diagnostics
1.3.6.1.4.1.1966.21.1.1.0.48NotificationmcrMediaOkcurrentTrap being sent indicates that the media converter module has passed its self-test diagnostics
1.3.6.1.4.1.1966.21.1.1.0.49NotificationmcrMediaLinkUpcurrentTrap being sent indicates that the current link status of the Fiber or Copper port on the media converter module is up.
1.3.6.1.4.1.1966.21.1.1.0.50NotificationmcrMediaLinkDowncurrentTrap being sent indicates that the current link status of the Fiber or Copper port on the media converter module is down.
1.3.6.1.4.1.1966.21.1.1.0.51NotificationmcrMediaConfUpdateFailcurrentTrap being sent indicates that the configuration update on the media converter module has failed.
1.3.6.1.4.1.1966.21.1.1.0.52NotificationmcrMediaConfUpdateSuccesscurrentTrap being sent indicates that the configuration update on the media converter module was successful. The media converter module configuration can be updated m…
1.3.6.1.4.1.1966.21.1.1.0.53NotificationmcrMediaConfMismatchcurrentTrap being sent indicates that a chassis slot is configured with Backup/Restore and the media converter module type configured for the slot does not match the …
1.3.6.1.4.1.1966.21.1.1.0.54NotificationmcrMediaConfMismatchResolvcurrentTrap being sent indicates that a user has taken action to resolved media converter module configuration mismatch
1.3.6.1.4.1.1966.21.1.1.0.55NotificationmcrMediaFirmwareUpdateFailcurrentTrap being sent indicates that an attempt to update a media converter module's firmware has Failed.
1.3.6.1.4.1.1966.21.1.1.0.56NotificationmcrMediaFirmwareUpdateSuccesscurrentTrap being sent indicates that an attempt to update a media converter module's firmware was successful.
1.3.6.1.4.1.1966.21.1.1.0.57NotificationmcrSfpInsertedcurrentTrap being sent indicates that a SFP module has been inserted into a media converter module
1.3.6.1.4.1.1966.21.1.1.0.58NotificationmcrSfpRemovedcurrentTrap being sent indicates that a SFP module has been removed from a media converter module
1.3.6.1.4.1.1966.21.1.1.0.59NotificationmcrSfpHighTempWarncurrentTrap being sent indicates that a SFP module's temperature has exceeded the high temperature warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.60NotificationmcrSfpHighTempWarnRecovcurrentTrap being sent indicates that a SFP module's temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.61NotificationmcrSfpHighTempAlarmcurrentTrap being sent indicates that a SFP module's temperature has exceeded the high temperature alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.62NotificationmcrSfpHighTempAlarmRecovcurrentTrap being sent indicates that a SFP module's temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.63NotificationmcrSfpLowTempWarncurrentTrap being sent indicates that a SFP module's temperature has gone below the low temperature warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.64NotificationmcrSfpLowTempWarnRecovcurrentTrap being sent indicates that a SFP module's temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.65NotificationmcrSfpLowTempAlarmcurrentTrap being sent indicates that a SFP module's temperature has gone below the low temperature alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.66NotificationmcrSfpLowTempAlarmRecovcurrentTrap being sent indicates that a SFP module's temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.67NotificationmcrSfpHighVoltWarncurrentTrap being sent indicates that a SFP module's voltage has exceeded the high voltage warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.68NotificationmcrSfpHighVoltWarnRecovcurrentTrap being sent indicates that a SFP module's voltage has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.69NotificationmcrSfpHighVoltAlarmcurrentTrap being sent indicates that a SFP module's voltage has exceeded the high voltage alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.70NotificationmcrSfpHighVoltAlarmRecovcurrentTrap being sent indicates that a SFP module's voltage has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.71NotificationmcrSfpLowVoltWarncurrentTrap being sent indicates that a SFP module's voltage has gone below the low voltage warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.72NotificationmcrSfpLowVoltWarnRecovcurrentTrap being sent indicates that a SFP module's voltage has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.73NotificationmcrSfpLowVoltAlarmcurrentTrap being sent indicates that a SFP module's voltage has gone below the low voltage alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.74NotificationmcrSfpLowVoltAlarmRecovcurrentTrap being sent indicates that a SFP module's voltage has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.75NotificationmcrSfpHighTxBiasWarncurrentTrap being sent indicates that a SFP module's TX Bias current has exceeded the high TX Bias current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.76NotificationmcrSfpHighTxBiasWarnRecovcurrentTrap being sent indicates that a SFP module's TX Bias current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.77NotificationmcrSfpHighTxBiasAlarmcurrentTrap being sent indicates that a SFP module's TX Bias current has exceeded the high TX Bias current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.78NotificationmcrSfpHighTxBiasAlarmRecovcurrentTrap being sent indicates that a SFP module's TX Bias current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.79NotificationmcrSfpLowTxBiasWarncurrentTrap being sent indicates that a SFP module's TX Bias current has gone below the low Tx Bias current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.80NotificationmcrSfpLowTxBiasWarnRecovcurrentTrap being sent indicates that a SFP module's TX Bias current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.81NotificationmcrSfpLowTxBiasAlarmcurrentTrap being sent indicates that a SFP module's TX Bias current has gone below the low Tx Bias current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.82NotificationmcrSfpLowTxBiasAlarmRecovcurrentTrap being sent indicates that a SFP module's TX Bias current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.83NotificationmcrSfpHighTxPowerWarncurrentTrap being sent indicates that a SFP module's TX power has exceeded the high TX power warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.84NotificationmcrSfpHighTxPowerWarnRecovcurrentTrap being sent indicates that a SFP module's TX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.85NotificationmcrSfpHighTxPowerAlarmcurrentTrap being sent indicates that a SFP module's TX power has exceeded the high TX power alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.86NotificationmcrSfpHighTxPowerAlarmRecovcurrentTrap being sent indicates that a SFP module's TX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.87NotificationmcrSfpLowTxPowerWarncurrentTrap being sent indicates that a SFP module's TX power has gone below the low TX power warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.88NotificationmcrSfpLowTxPowerWarnRecovcurrentTrap being sent indicates that a SFP module's TX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.89NotificationmcrSfpLowTxPowerAlarmcurrentTrap being sent indicates that a SFP module's TX power has gone below the low TX power alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.90NotificationmcrSfpLowTxPowerAlarmRecovcurrentTrap being sent indicates that a SFP module's TX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.91NotificationmcrSfpHighRxPowerWarncurrentTrap being sent indicates that a SFP module's RX power has exceeded the high RX power warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.92NotificationmcrSfpHighRxPowerWarnRecovcurrentTrap being sent indicates that a SFP module's RX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.93NotificationmcrSfpHighRxPowerAlarmcurrentTrap being sent indicates that a SFP module's RX power has exceeded the high RX power alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.94NotificationmcrSfpHighRxPowerAlarmRecovcurrentTrap being sent indicates that a SFP module's RX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.95NotificationmcrSfpLowRxPowerWarncurrentTrap being sent indicates that a SFP module's RX power has gone below the low RX power warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.96NotificationmcrSfpLowRxPowerWarnRecovcurrentTrap being sent indicates that a SFP module's RX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.97NotificationmcrSfpLowRxPowerAlarmcurrentTrap being sent indicates that a SFP module's RX power has gone below the low RX power alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.98NotificationmcrSfpLowRxPowerAlarmRecovcurrentTrap being sent indicates that a SFP module's RX power has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.99NotificationmcrChassisCommTempSensorFailcurrentTrap being sent indicates that communication with the chassis temperature sensor has failed. The current chassis temperature reading will be unknown
1.3.6.1.4.1.1966.21.1.1.0.100NotificationmcrChassisCommTempSensorRecovcurrentTrap being sent indicates that communication with the chassis temperature sensor has recovered.
1.3.6.1.4.1.1966.21.1.1.0.101NotificationmcrMediaDetectFailcurrentTrap being sent indicates that the indicated media card is being powered down due to the detection of a hardware failure.
1.3.6.1.4.1.1966.21.1.1.0.102NotificationmcrMediaBadImagecurrentTrap being sent indicates that the CRC of the media converter module firmware is incorrect. This can be caused if there is no image on the module or the image …
1.3.6.1.4.1.1966.21.1.1.0.103NotificationmcrSfpLostCommcurrentTrap being sent indicates that the media converter module's microcode can no longer communicate with the SFP module.
1.3.6.1.4.1.1966.21.1.1.0.104NotificationmcrSfpRecovCommcurrentTrap being sent indicates that the media converter module's microcode had previously lost communication with, but has now regained communication with the SFP m…
1.3.6.1.4.1.1966.21.1.1.0.105NotificationmcrModuleNotSupportedcurrentTrap being sent indicates that the media converter module is not fully supported by the management module. Update the management module firmware to rectify thi…
1.3.6.1.4.1.1966.21.1.1.0.106NotificationmcrModuleFirmwareUpdatecurrentTrap being sent indicates that the media converter module firmware is being updated.
1.3.6.1.4.1.1966.21.1.1.0.107NotificationmcrSfpPortShutdowncurrentTrap being sent indicates that the Sfp/Xfp port has been shutdown due to high temperature.
1.3.6.1.4.1.1966.21.1.1.0.108NotificationmcrSfpPortShutdownRecovcurrentTrap being sent indicates that the Sfp/Xfp port shutdown has recovered.
1.3.6.1.4.1.1966.21.1.1.0.109NotificationmcrXfpHighApdBiasWarncurrentTrap being sent indicates that an XFP module's APD Bias Current has exceeded the high APD Bias warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.110NotificationmcrXfpHighApdBiasWarnRecovcurrentTrap being sent indicates that an XFP module's APD Bias Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.111NotificationmcrXfpHighApdBiasAlarmcurrentTrap being sent indicates that an XFP module's APD Bias Current has exceeded the high APD Bias alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.112NotificationmcrXfpHighApdBiasAlarmRecovcurrentTrap being sent indicates that an XFP module's APD Bias Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.113NotificationmcrXfpLowApdBiasWarncurrentTrap being sent indicates that an XFP module's APD Bias Current has gone below the low APD Bias warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.114NotificationmcrXfpLowApdBiasWarnRecovcurrentTrap being sent indicates that an XFP module's APD Bias Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.115NotificationmcrXfpLowApdBiasAlarmcurrentTrap being sent indicates that an XFP module's APD Bias Current has gone below the low APD Bias alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.116NotificationmcrXfpLowApdBiasAlarmRecovcurrentTrap being sent indicates that an XFP module's APD Bias Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.117NotificationmcrXfpHighTecCurrentWarncurrentTrap being sent indicates that an XFP module's TEC Current has exceeded the high TEC Current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.118NotificationmcrXfpHighTecCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's TEC Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.119NotificationmcrXfpHighTecCurrentAlarmcurrentTrap being sent indicates that an XFP module's TEC Current has exceeded the high TEC Current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.120NotificationmcrXfpHighTecCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's TEC Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.121NotificationmcrXfpLowTecCurrentWarncurrentTrap being sent indicates that an XFP module's TEC Current has gone below the low TEC Current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.122NotificationmcrXfpLowTecCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's TEC Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.123NotificationmcrXfpLowTecCurrentAlarmcurrentTrap being sent indicates that an XFP module's TEC Current has gone below the low TEC Current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.124NotificationmcrXfpLowTecCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's TEC Current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.125NotificationmcrXfpHighLaserTempWarncurrentTrap being sent indicates that an XFP module's Laser Temperature has exceeded the high Laser Temperature warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.126NotificationmcrXfpHighLaserTempWarnRecovcurrentTrap being sent indicates that an XFP module's Laser Temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.127NotificationmcrXfpHighLaserTempAlarmcurrentTrap being sent indicates that an XFP module's Laser Temperature has exceeded the high Laser Temperature alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.128NotificationmcrXfpHighLaserTempAlarmRecovcurrentTrap being sent indicates that an XFP module's Laser Temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.129NotificationmcrXfpLowLaserTempWarncurrentTrap being sent indicates that an XFP module's Laser Temperature has gone below the low Laser Temperature warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.130NotificationmcrXfpLowLaserTempWarnRecovcurrentTrap being sent indicates that an XFP module's Laser Temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.131NotificationmcrXfpLowLaserTempAlarmcurrentTrap being sent indicates that an XFP module's Laser Temperature has gone below the low Laser Temperature alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.132NotificationmcrXfpLowLaserTempAlarmRecovcurrentTrap being sent indicates that an XFP module's Laser Temperature has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.133NotificationmcrXfpHighLaserWavelengthWarncurrentTrap being sent indicates that an XFP module's Laser Wavelength has exceeded the high Laser Wavelength warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.134NotificationmcrXfpHighLaserWavelengthWarnRecovcurrentTrap being sent indicates that an XFP module's Laser Wavelength has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.135NotificationmcrXfpHighLaserWavelengthAlarmcurrentTrap being sent indicates that an XFP module's Laser Wavelength has exceeded the high Laser Wavelength alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.136NotificationmcrXfpHighLaserWavelengthAlarmRecovcurrentTrap being sent indicates that an XFP module's Laser Wavelength has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.137NotificationmcrXfpLowLaserWavelengthWarncurrentTrap being sent indicates that an XFP module's Laser Wavelength has gone below the low Laser Wavelength warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.138NotificationmcrXfpLowLaserWavelengthWarnRecovcurrentTrap being sent indicates that an XFP module's Laser Wavelength has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.139NotificationmcrXfpLowLaserWavelengthAlarmcurrentTrap being sent indicates that an XFP module's Laser Wavelength has gone below the low Laser Wavelength alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.140NotificationmcrXfpLowLaserWavelengthAlarmRecovcurrentTrap being sent indicates that an XFP module's Laser Wavelength has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.141NotificationmcrXfpHigh5VoltWarncurrentTrap being sent indicates that an XFP module's +5v supply has exceeded the high +5v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.142NotificationmcrXfpHigh5VoltWarnRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.143NotificationmcrXfpHigh5VoltAlarmcurrentTrap being sent indicates that an XFP module's +5v supply has exceeded the high +5v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.144NotificationmcrXfpHigh5VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.145NotificationmcrXfpLow5VoltWarncurrentTrap being sent indicates that an XFP module's +5v supply has gone below the low +5v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.146NotificationmcrXfpLow5VoltWarnRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.147NotificationmcrXfpLow5VoltAlarmcurrentTrap being sent indicates that an XFP module's +5v supply has gone below the low +5v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.148NotificationmcrXfpLow5VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.149NotificationmcrXfpHigh33VoltWarncurrentTrap being sent indicates that an XFP module's +3.3v supply has exceeded the high +3.3v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.150NotificationmcrXfpHigh33VoltWarnRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.151NotificationmcrXfpHigh33VoltAlarmcurrentTrap being sent indicates that an XFP module's +3.3v supply has exceeded the high +3.3v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.152NotificationmcrXfpHigh33VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.153NotificationmcrXfpLow33VoltWarncurrentTrap being sent indicates that an XFP module's +3.3v supply has gone below the low +3.3v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.154NotificationmcrXfpLow33VoltWarnRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.155NotificationmcrXfpLow33VoltAlarmcurrentTrap being sent indicates that an XFP module's +3.3v supply has gone below the low +3.3v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.156NotificationmcrXfpLow33VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.157NotificationmcrXfpHigh18VoltWarncurrentTrap being sent indicates that an XFP module's +1.8v supply has exceeded the high +1.8v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.158NotificationmcrXfpHigh18VoltWarnRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.159NotificationmcrXfpHigh18VoltAlarmcurrentTrap being sent indicates that an XFP module's +1.8v supply has exceeded the high +1.8v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.160NotificationmcrXfpHigh18VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.161NotificationmcrXfpLow18VoltWarncurrentTrap being sent indicates that an XFP module's +1.8v supply has gone below the low +1.8v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.162NotificationmcrXfpLow18VoltWarnRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.163NotificationmcrXfpLow18VoltAlarmcurrentTrap being sent indicates that an XFP module's +1.8v supply has gone below the low +1.8v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.164NotificationmcrXfpLow18VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.165NotificationmcrXfpHighM52VoltWarncurrentTrap being sent indicates that an XFP module's -5.2v supply has exceeded the high -5.2v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.166NotificationmcrXfpHighM52VoltWarnRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.167NotificationmcrXfpHighM52VoltAlarmcurrentTrap being sent indicates that an XFP module's -5.2v supply has exceeded the high -5.2v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.168NotificationmcrXfpHighM52VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.169NotificationmcrXfpLowM52VoltWarncurrentTrap being sent indicates that an XFP module's -5.2v supply has gone below the low -5.2v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.170NotificationmcrXfpLowM52VoltWarnRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.171NotificationmcrXfpLowM52VoltAlarmcurrentTrap being sent indicates that an XFP module's -5.2v supply has gone below the low -5.2v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.172NotificationmcrXfpLowM52VoltAlarmRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.173NotificationmcrXfpHigh5VCurrentWarncurrentTrap being sent indicates that an XFP module's +5v supply current has exceeded the high +5v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.174NotificationmcrXfpHigh5VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's +5v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.175NotificationmcrXfpHigh5VCurrentAlarmcurrentTrap being sent indicates that an XFP module's +5v supply current has exceeded the high +5v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.176NotificationmcrXfpHigh5VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's +5v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.177NotificationmcrXfpLow5VCurrentWarncurrentTrap being sent indicates that an XFP module's +5v supply current has gone below the low +5v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.178NotificationmcrXfpLow5VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's +5v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.179NotificationmcrXfpLow5VCurrentAlarmcurrentTrap being sent indicates that an XFP module's +5v supply current has gone below the low +5v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.180NotificationmcrXfpLow5VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's +5v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.181NotificationmcrXfpHigh33VCurrentWarncurrentTrap being sent indicates that an XFP module's +3.3v supply current has exceeded the high +3.3v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.182NotificationmcrXfpHigh33VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.183NotificationmcrXfpHigh33VCurrentAlarmcurrentTrap being sent indicates that an XFP module's +3.3v supply current has exceeded the high +3.3v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.184NotificationmcrXfpHigh33VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.185NotificationmcrXfpLow33VCurrentWarncurrentTrap being sent indicates that an XFP module's +3.3v supply current has gone below the low +3.3v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.186NotificationmcrXfpLow33VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.187NotificationmcrXfpLow33VCurrentAlarmcurrentTrap being sent indicates that an XFP module's +3.3v supply current has gone below the low +3.3v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.188NotificationmcrXfpLow33VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.189NotificationmcrXfpHigh18VCurrentWarncurrentTrap being sent indicates that an XFP module's +1.8v supply current has exceeded the high +1.8v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.190NotificationmcrXfpHigh18VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.191NotificationmcrXfpHigh18VCurrentAlarmcurrentTrap being sent indicates that an XFP module's +1.8v supply current has exceeded the high +1.8v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.192NotificationmcrXfpHigh18VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.193NotificationmcrXfpLow18VCurrentWarncurrentTrap being sent indicates that an XFP module's +1.8v supply current has gone below the low +1.8v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.194NotificationmcrXfpLow18VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.195NotificationmcrXfpLow18VCurrentAlarmcurrentTrap being sent indicates that an XFP module's +1.8v supply current has gone below the low +1.8v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.196NotificationmcrXfpLow18VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.197NotificationmcrXfpHighM52VCurrentWarncurrentTrap being sent indicates that an XFP module's -5.2v supply current has exceeded the high -5.2v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.198NotificationmcrXfpHighM52VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.199NotificationmcrXfpHighM52VCurrentAlarmcurrentTrap being sent indicates that an XFP module's -5.2v supply current has exceeded the high -5.2v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.200NotificationmcrXfpHighM52VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.201NotificationmcrXfpLowM52VCurrentWarncurrentTrap being sent indicates that an XFP module's -5.2v supply current has gone below the low -5.2v supply current warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.202NotificationmcrXfpLowM52VCurrentWarnRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.203NotificationmcrXfpLowM52VCurrentAlarmcurrentTrap being sent indicates that an XFP module's -5.2v supply current has gone below the low -5.2v supply current alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.204NotificationmcrXfpLowM52VCurrentAlarmRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply current has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.205NotificationmcrXfpHighVCC5WarncurrentTrap being sent indicates that an XFP module's +5v supply has exceeded the high +5v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.206NotificationmcrXfpHighVCC5WarnRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.207NotificationmcrXfpHighVCC5AlarmcurrentTrap being sent indicates that an XFP module's +5v supply has exceeded the high +5v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.208NotificationmcrXfpHighVCC5AlarmRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.209NotificationmcrXfpLowVCC5WarncurrentTrap being sent indicates that an XFP module's +5v supply has gone below the low +5v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.210NotificationmcrXfpLowVCC5WarnRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.211NotificationmcrXfpLowVCC5AlarmcurrentTrap being sent indicates that an XFP module's +5v supply has gone below the low +5v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.212NotificationmcrXfpLowVCC5AlarmRecovcurrentTrap being sent indicates that an XFP module's +5v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.213NotificationmcrXfpHighVCC3WarncurrentTrap being sent indicates that an XFP module's +3.3v supply has exceeded the high +3.3v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.214NotificationmcrXfpHighVCC3WarnRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.215NotificationmcrXfpHighVCC3AlarmcurrentTrap being sent indicates that an XFP module's +3.3v supply has exceeded the high +3.3v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.216NotificationmcrXfpHighVCC3AlarmRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.217NotificationmcrXfpLowVCC3WarncurrentTrap being sent indicates that an XFP module's +3.3v supply has gone below the low +3.3v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.218NotificationmcrXfpLowVCC3WarnRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.219NotificationmcrXfpLowVCC3AlarmcurrentTrap being sent indicates that an XFP module's +3.3v supply has gone below the low +3.3v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.220NotificationmcrXfpLowVCC3AlarmRecovcurrentTrap being sent indicates that an XFP module's +3.3v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.221NotificationmcrXfpHighVCC2WarncurrentTrap being sent indicates that an XFP module's +1.8v supply has exceeded the high +1.8v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.222NotificationmcrXfpHighVCC2WarnRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.223NotificationmcrXfpHighVCC2AlarmcurrentTrap being sent indicates that an XFP module's +1.8v supply has exceeded the high +1.8v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.224NotificationmcrXfpHighVCC2AlarmRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.225NotificationmcrXfpLowVCC2WarncurrentTrap being sent indicates that an XFP module's +1.8v supply has gone below the low +1.8v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.226NotificationmcrXfpLowVCC2WarnRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.227NotificationmcrXfpLowVCC2AlarmcurrentTrap being sent indicates that an XFP module's +1.8v supply has gone below the low +1.8v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.228NotificationmcrXfpLowVCC2AlarmRecovcurrentTrap being sent indicates that an XFP module's +1.8v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.229NotificationmcrXfpHighVEE5WarncurrentTrap being sent indicates that an XFP module's -5.2v supply has exceeded the high -5.2v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.230NotificationmcrXfpHighVEE5WarnRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.231NotificationmcrXfpHighVEE5AlarmcurrentTrap being sent indicates that an XFP module's -5.2v supply has exceeded the high -5.2v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.232NotificationmcrXfpHighVEE5AlarmRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.233NotificationmcrXfpLowVEE5WarncurrentTrap being sent indicates that an XFP module's -5.2v supply has gone below the low -5.2v supply warning threshold.
1.3.6.1.4.1.1966.21.1.1.0.234NotificationmcrXfpLowVEE5WarnRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.235NotificationmcrXfpLowVEE5AlarmcurrentTrap being sent indicates that an XFP module's -5.2v supply has gone below the low -5.2v supply alarm threshold.
1.3.6.1.4.1.1966.21.1.1.0.236NotificationmcrXfpLowVEE5AlarmRecovcurrentTrap being sent indicates that an XFP module's -5.2v supply has recovered to normal operating level.
1.3.6.1.4.1.1966.21.1.1.0.237NotificationmcrSfpSpeedMismatchcurrentTrap being sent indicates that there is a speed mismatch between the two SFP modules installed in the media converter.
1.3.6.1.4.1.1966.21.1.1.0.238NotificationmcrSfpSpeedMismatchRecovcurrentTrap being sent indicates that the speed mismatch between the two SFP modules has recovered.
1.3.6.1.4.1.1966.21.1.1.0.239NotificationmcrXfpPowerExceededcurrentTrap being sent indicates that an XFP module's power requirements has exceeded card capacity.
1.3.6.1.4.1.1966.21.1.1.0.240NotificationmcrXfpPowerExceededRecovcurrentTrap being sent indicates that the XFP excessive power alarm has recovered.
1.3.6.1.4.1.1966.21.1.1.0.241NotificationmcrLinkTestErrorcurrentTrap being sent indicates that the link test running on the media converter has detected errors.
1.3.6.1.4.1.1966.21.1.1.0.242NotificationmcrAlarmRelayEngagedcurrentTrap being sent indicates that the chassis alarm relay has engaged
1.3.6.1.4.1.1966.21.1.1.0.243NotificationmcrAlarmRelayDisengagedcurrentTrap being sent indicates that the chassis alarm relay has disengaged
1.3.6.1.4.1.1966.21.1.1.0.244NotificationmcrBandwidthLevelUpstreamLowcurrentTrap being sent indicates the media port is in a low upstream bandwidth condition. This happens when the bandwidth is below the configured threshold.
1.3.6.1.4.1.1966.21.1.1.0.245NotificationmcrBandwidthLevelUpstreamRecovcurrentTrap being sent indicates the media port has recovered from a low upstream bandwidth condition.
1.3.6.1.4.1.1966.21.1.1.0.246NotificationmcrBandwidthLevelDownstreamLowcurrentTrap being sent indicates the media port is in a low downstream bandwidth condition. This happens when the bandwidth is below the configured threshold.
1.3.6.1.4.1.1966.21.1.1.0.247NotificationmcrBandwidthLevelDownstreamRecovcurrentTrap being sent indicates the media port has recovered from a low downstream bandwidth condition.
1.3.6.1.4.1.1966.21.1.1.0.248NotificationmcrMediaRemoteResetcurrentTrap being sent indicates that the media converter module's peer has been manually reset by a user managing the unit.
1.3.6.1.4.1.1966.21.1.1.1NodemcrMGTMIBObjects
1.3.6.1.4.1.1966.21.1.1.1.1NodemcrChassisGroup
1.3.6.1.4.1.1966.21.1.1.1.1.1TablemcrChassisTablenot-accessiblecurrentTable of chassis diagnostic type information.
1.3.6.1.4.1.1966.21.1.1.1.1.1.1RowmcrChassisEntrynot-accessiblecurrentEntries of the table, each relating to a separate chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.1ColumnmcrChassisIndexaccessible-for-notifycurrentThis object identifies the chassis number.
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.2ColumnchassisModelNameread-onlycurrentThis object identifies the name of the chassis model. For the 2-slot chassis, this is the product model.
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.3ColumnchassisModelDescread-onlycurrentThis object identifies a static description of the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.4ColumnchassisSerialNumberread-writecurrentThis object identifies the chassis serial number. For the 2-slot chassis, this is writeable (and user-defined). For other chassis, this is read-only (and refle…
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.5ColumnchassisBootloaderVersionread-onlycurrentThis object identifies the chassis bootloader version. (Not applicable to 2-slot chassis.)
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.6ColumnchassisFirmwareVersionread-onlycurrentThis object identifies the chassis firmware version. (Not applicable to 2-slot chassis.)
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.7ColumnchassisOutStandWarnAlarmsread-onlycurrentThis object identifies the number of outstanding warnings and alarms for this chassis. If this value is not zero then user intervention is needed to resolve th…
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.8ColumnchassisDiagStatusread-onlycurrentThis object identifies the chassis self-test diagnostics result. It will return zero if it passed and non-zero error code if it failed. The following are possi…
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.9ColumnchassisTemperatureread-onlycurrentThis object identifies the current temperature of the chassis. The temperature returned will be either Celsius or Fahrenheit based on your current regional dis…
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.10ColumnchassisCfgHighTempThresholdread-writecurrentThis object identifies the chassis temperature high threshold. If the chassis temperature exceeds this threshold then an alert will be generated. The value rea…
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.11ColumnchassisResetread-writecurrentThis object allows the resetting of the chassis (all modules). Reading this object always returns 0.
1.3.6.1.4.1.1966.21.1.1.1.1.1.1.12ColumnchassisCfgMgmtSlotread-writecurrentFor the 2-slot chassis, this is the configured slot index of the management module. This value only needs to be changed if the management module is physically …
1.3.6.1.4.1.1966.21.1.1.1.1.2TablemcrPsmuTablenot-accessiblecurrentTable of PSMU (Power Supply Monitoring Unit) diagnostic type information. (Not applicable to 2-slot chassis.)
1.3.6.1.4.1.1966.21.1.1.1.1.2.1RowmcrPsmuEntrynot-accessiblecurrentEntries of the table, each relating to a separate PSMU.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.2ColumnmcrPsmuIndexaccessible-for-notifycurrentThis object identifies the PSMU bay as either A or B.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.3ColumnmcrPsmuModelNameread-onlycurrentThis object identifies the PSMU model.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.4ColumnmcrPsmuModelDescread-onlycurrentThis object identifies a static description of the power supply model present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.5ColumnmcrPsmuPsuSerialNumberread-onlycurrentThis object identifies the PSU serial number.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.6ColumnmcrPsmuBootloaderVersionread-onlycurrentThis object identifies the PSMU bootloader version.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.7ColumnmcrPsmuFirmwareVersionread-onlycurrentThis object identifies the PSMU firmware version.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.8ColumnmcrPsmuOutStandWarnAlarmsread-onlycurrentThis object identifies the number of outstanding warnings and alarms for this chassis. If this value is not zero then user intervention is needed to resolve th…
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.9ColumnmcrPsmuPsuStatusread-onlycurrentThis object identifies if the PSMU power supply unit (PSU) status.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.10ColumnmcrPsmuPsuVoltageread-onlycurrentThis object identifies the current PSU voltage being supplied.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.11ColumnmcrPsmuPsuPowerUsageread-onlycurrentThis object identifies power currently being supplied to the chassis, in milliwatts. A value of 0 indicate that the power supply is not in use
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.12ColumnmcrPsmuFanStatusread-onlycurrentThis object identifies the fan status.
1.3.6.1.4.1.1966.21.1.1.1.1.2.1.13ColumnmcrPsmuFanSpeedread-onlycurrentThis object identifies the speed of the fan in RPM.
1.3.6.1.4.1.1966.21.1.1.1.1.3TablemcrChassisSlotTablenot-accessiblecurrentTable of chassis slot configuration, status and diagnostic type information.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1RowmcrChassisSlotEntrynot-accessiblecurrentEntries of the table, each relating to a separate slot in a chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.2ColumnmcrChassisSlotIndexaccessible-for-notifycurrentThis object identifies the chassis slot number.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.3ColumnmcrUserDefinedModuleNameread-onlycurrentThis object identifies the user defined name of the module inserted in the slot. The default name is the model name of the media converter module
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.4ColumnmcrModuleModelNameread-onlycurrentThis object identifies the model name of the module inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.5ColumnmcrUnManagedModuleSlotNameread-writecurrentThis object identifies the user defined name for an unmanaged module inserted in the slot. Unmanaged modules include all perle C-1000, C-100, C-1110 and c-110 …
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.6ColumnmcrModuleSerialNumberread-onlycurrentThis object identifies the serial number of the module inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.7ColumnmcrModuleBootloaderVersionread-onlycurrentThis object identifies the bootloader version of the module inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.8ColumnmcrModuleFirmwareVersionread-onlycurrentThis object identifies the firmware version of the module inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.9ColumnmcrModuleoOutStandWarnAlarmsread-onlycurrentThis object identifies the number of outstanding warnings and alarms for this module. If this value is not zero then user intervention is needed to resolve the…
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.10ColumnmcrModuleDiagStatusread-onlycurrentThis object identifies the module's self-test diagnostics result. It will return zero if it passed and non-zero error code if the module has failed.The followi…
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.11ColumnmcrModuleTypeInsertedread-onlycurrentThis object identifies the module type inserted for this chassis slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.12ColumnmcrMediaConfigBackupRestoreread-writecurrentThis object is applicable to media converter modules only. It identifies whether the media configuration will be automatically backed up to or restored from th…
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.13ColumnmcrMediaBackedupModuleTyperead-onlycurrentThis object identifies the media converter module type of the configuration that was backed up for the slot on the management card's non-volatile memory when t…
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.14ColumnmcrChassisPwrUpSlotPwrStateread-writecurrentThis object identifies the default power state of the slot when the chassis is initially powered up. The current power state of the slot can be manually change…
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.15ColumnmcrCurrentPowerStateread-writecurrentWriting this object allows the current power state of the slot to be turned on or off. This object is not writable for management modules or the 2-slot chassis…
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.16ColumnmcrPowerScheduleEnableread-writecurrentThis object is not applicable to management modules. It identifies if power schedule is enabled for the slot. (Not applicable to 2-slot chassis.)
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.17ColumnmcrModuleResetread-writecurrentThis object allows you to reset the module inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.18ColumnmcrModuleResetToFactoryread-writecurrentThis object allows you to reset to factory the module inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.3.1.19ColumnmcrModuleModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the slot.
1.3.6.1.4.1.1966.21.1.1.1.1.4NodemcrModuleTypes
1.3.6.1.4.1.1966.21.1.1.1.1.4.1Nodecm1000Fixed
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1Tablecm1000FixedTablenot-accessiblecurrentTable of CM-1000 type media converter module's status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1Rowcm1000FixedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.2Columncm1000SlotIndexnot-accessiblecurrentThe Slot number the CM-1000 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.3Columncm1000Modelnameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.4Columncm1000ModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.5Columncm1000HwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwi…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.6Columncm1000HwSw1FiberAutoNegread-onlycurrentMedia converter module's current switch setting for fiber Auto-Negotiation.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.7Columncm1000HwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.8Columncm1000HwSw3FiberFaultAlertread-onlycurrentMedia converter module's current switch setting for Fiber Fault Alert.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.9Columncm1000HwSw4Duplexread-onlycurrentMedia converter module's current switch setting for copper duplex.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.10Columncm1000HwSw5Pauseread-onlycurrentMedia converter module's current switch setting for copper pause (flow control).
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.11Columncm1000HwSw6Loopbackread-onlycurrentMedia converter module's current switch setting for fiber loopback mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.12Columncm1000FiberLinkStatusread-onlycurrentMedia converter module's current fiber link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.13Columncm1000FiberConnTyperead-onlycurrentMedia converter module's fiber port connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.14Columncm1000FiberAutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.15Columncm1000FiberSpeedread-onlycurrentMedia converter module's fiber port speed in megabits per second.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.16Columncm1000FiberDuplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.17Columncm1000FiberPauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.18Columncm1000FiberLPRFStatusread-onlycurrentMedia converter module's fiber Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.19Columncm1000FiberReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.20Columncm1000FiberLoopBackread-writecurrentMedia converter module's current fiber loopback mode setting. Writing to this object will change the current settings. This object is read-only if the media co…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.21Columncm1000CopperLinkStatusread-onlycurrentMedia converter module's current copper link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.22Columncm1000CopperConnTyperead-onlycurrentMedia converter module's copper connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.23Columncm1000CopperAutoNegStateread-onlycurrentMedia converter module's current copper auto-negotiation state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.24Columncm1000CopperSpeedread-onlycurrentMedia converter module's copper port speed in megabits per second.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.25Columncm1000CopperDuplexread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated duplex setting. If auto-neg…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.26Columncm1000CopperCrossOverread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.27Columncm1000CopperPauseEnhread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated pause setting. If auto-nego…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.28Columncm1000CopperLPRFStatusread-onlycurrentMedia converter module's copper Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2Tablecm1000ConfigTablenot-accessiblecurrentTable of CM-1000 type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1Rowcm1000ConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.2Columncm1000ConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-1000 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.3Columncm1000ConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.4Columncm1000ConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.5Columncm1000ConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.6Columncm1000ConfigFiberFaultAlertread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.7Columncm1000ConfigJumboPacketsread-writecurrentThis object identifies the Jumbo Packet setting for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.8Columncm1000ConfigFiberPortNameread-writecurrentThis object identifies a user definable name for the fiber port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.9Columncm1000ConfigFiberPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.10Columncm1000ConfigFiberAutoNegread-writecurrentThis object identifies the wither fiber auto-negotiation is enabled. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.11Columncm1000ConfigCopperPortNameread-writecurrentThis object identifies a user definable name for the copper port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.12Columncm1000ConfigCopperPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.13Columncm1000ConfigCopperDuplexread-writecurrentThis object identifies the duplex settings for the copper port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.14Columncm1000ConfigCopperPauseEnhread-writecurrentThis object identifies the copper pause (flow control) setting that is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrica…
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.15Columncm1000ConfigCopperLowPowerread-writecurrentThis object identifies the copper low power setting for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3Tablecm1000LedTablenot-accessiblecurrentTable of CM-1000 type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1Rowcm1000LedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.2Columncm1000LedSlotIndexnot-accessiblecurrentThe Slot number the CM-1000 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.3Columncm1000LedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.4Columncm1000LedLKFread-onlycurrentThis object identifies the status of the link copper (LKC) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber …
1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.5Columncm1000LedLKCread-onlycurrentThis object identifies the status of the link copper (LKC) LED on the media converter module. Possible status values are: off(0) - No copper link on(1) - Coppe…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2Nodecm100Fixed
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1Tablecm100FixedTablenot-accessiblecurrentTable of CM-100 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1Rowcm100FixedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.2Columncm100SlotIndexnot-accessiblecurrentThe Slot number the CM-100 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.3Columncm100ModelNameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.4Columncm100ModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.5Columncm100HwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware switch on the media converter module. When this object is set to hardwareSwitch…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.6Columncm100HwJmp6AutoMDIread-onlycurrentThis object identifies the media converter module's hardware Auto MDIX jumper settings.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.7Columncm100HwSw1AutoNegotiationread-onlycurrentMedia converter module's current switch setting for fiber Auto-Negotiation.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.8Columncm100HwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.9Columncm100HwSw3FarEndFaultread-onlycurrentMedia converter module's current switch setting for Far End Fault.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.10Columncm100HwSw5Pauseread-onlycurrentMedia converter module's current switch setting for copper pause (flow control).
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.11Columncm100HwSw6Loopbackread-onlycurrentMedia converter module's current switch setting for fiber loopback mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.12Columncm100FiberLinkStatusread-onlycurrentMedia converter module's current fiber link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.13Columncm100FiberConnTyperead-onlycurrentMedia converter module's fiber port connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.14Columncm100FiberSpeedread-onlycurrentMedia converter module's fiber port speed in megabits per second.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.15Columncm100FiberFarEndFaultread-onlycurrentMedia converter module's current fiber Far End Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.16Columncm100FiberReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.17Columncm100FiberLoopBackread-writecurrentThis object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.18Columncm100CopperLinkStatusread-onlycurrentMedia converter module's current copper link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.19Columncm100CopperConnTyperead-onlycurrentMedia converter module's copper connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.20Columncm100CopperAutoNegStateread-onlycurrentMedia converter module's current copper auto-negotiation state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.21Columncm100CopperSpeedread-onlycurrentThis object identifies the copper port speed in megabits per second.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.22Columncm100CopperDuplexread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated duplex setting. If auto-neg…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.23Columncm100CopperCrossOverread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.24Columncm100CopperPauseread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated pause (flow control) settin…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.25Columncm100CopperLPRFStatusread-onlycurrentMedia converter module's copper Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2Tablecm100ConfigTablenot-accessiblecurrentTable of CM-100 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1Rowcm100ConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.2Columncm100ConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-1000 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.3Columncm100ConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.4Columncm100ConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.5Columncm100ConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.6Columncm100ConfigFiberFarEndFaultread-writecurrentThis object identifies the fiber Far End Fault setting for the media module. This setting is always enabled if Link Mode is set to linkPassthrough. This object…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.7Columncm100ConfigFiberPortNameread-writecurrentThis object identifies a user definable name for the fiber port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.8Columncm100ConfigFiberPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.9Columncm100ConfigCopperPortNameread-writecurrentThis object identifies a user definable name for the copper port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.10Columncm100ConfigCopperPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.11Columncm100ConfigCopperAutoNegotiationread-writecurrentThis object identifies the whether copper auto-negotiation is enabled. This object is read-only if the media converter module's ConfigMode jumper is set to har…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.12Columncm100ConfigCopperCrossOverread-writecurrentThis object identifies the copper MDI/MDI-X setting.This object is read-only if the media converter module's ConfigMode jumper is set to
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.13Columncm100ConfigCopperPauseread-writecurrentThis object identifies the copper's port pause (flow control) settings. This object is read-only if the media converter module's ConfigMode jumper is set to ha…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3Tablecm100LedTablenot-accessiblecurrentTable of CM-100 type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1Rowcm100LedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-100 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.2Columncm100LedSlotIndexnot-accessiblecurrentThe Slot number the CM-100 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.3Columncm100LedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.4Columncm100LedLKFread-onlycurrentThis object identifies the status of the link fiber (LKF) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber l…
1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.5Columncm100LedLKCread-onlycurrentThis object identifies the status of the link copper (LKC) LED on the media converter module. Possible status values are: off(0) - No copper link on(1) - Coppe…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3Nodecm1110RateConv
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1Tablecm1110RateConvTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1Rowcm1110RateConvEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.2Columncm1110SlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.3Columncm1110ModelNameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.4Columncm1110ModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.5Columncm1110HwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware switch on the media converter module. When this object is set to hardwareSwitch…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.6Columncm1110HwJmp6AutoMDIXread-onlycurrentThis object identifies the media converter module's hardware Auto MDIX jumper settings.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.7Columncm1110HwSw1TpAutoNegotiationread-onlycurrentMedia converter module's current switch setting for copper Auto-Negotiation.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.8Columncm1110HwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.9Columncm1110HwSw3FiberFaultAlertread-onlycurrentMedia converter module's current switch setting for Fiber Fault Alert.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.10Columncm1110HwSw4TpDuplexread-onlycurrentMedia converter module's current switch setting for copper duplex.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.11Columncm1110HwSw5TpSpeedread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.12Columncm1110HwSw6FiberAutoNegotiationread-onlycurrentMedia converter module's current switch setting for fiber Auto-Ngotiation. This object is not applicable if there is a 100 Mbps SFP modules inserted.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.13Columncm1110HwSw6FiberSfp100Duplexread-onlycurrentMedia converter module's current switch setting for fiber duplex if a 100 Mbps SFP module is inserted. Otherwise this object is not applicable.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.14Columncm1110HwSw7Loopbackread-onlycurrentMedia converter module's current switch setting for fiber loopback mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.15Columncm1110FiberLinkStatusread-onlycurrentMedia converter module's current fiber link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.16Columncm1110FiberConnTyperead-onlycurrentMedia converter module's fiber port connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.17Columncm1110FiberAutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state. This object is not applicable if the fiber connector type is a 100 Mbps SFP module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.18Columncm1110FiberSpeedread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.19Columncm1110FiberDuplexread-onlycurrentThis object identifies the current fiber port duplex state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.20Columncm1110FiberPauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.21Columncm1110FiberLPRFStatusread-onlycurrentMedia converter module's fiber Link Partner Remote Fault status. This object is not applicable if there is a 100 Mbps SFP module inserted.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.22Columncm1110FiberSfp100FarEndFaultread-onlycurrentMedia converter module's current fiber Far End Fault status if a 100 Mbps SFP module is inserted. Otherwise this object is not applicable.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.23Columncm1110FiberReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.24Columncm1110FiberLoopBackread-writecurrentThis object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.25Columncm1110CopperLinkStatusread-onlycurrentMedia converter module's current copper link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.26Columncm1110CopperConnTyperead-onlycurrentMedia converter module's copper connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.27Columncm1110CopperAutoNegStateread-onlycurrentMedia converter module's current copper auto-negotiation state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.28Columncm1110CopperSpeedread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated speed setting. If auto-nego…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.29Columncm1110CopperDuplexread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated duplex setting. If auto-neg…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.30Columncm1110CopperCrossOverread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.31Columncm1110CopperPauseEnhread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated pause setting. If auto-nego…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.32Columncm1110CopperLPRFStatusread-onlycurrentMedia converter module's copper Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.33Columncm1110CopperAutoSpeedDownshiftread-onlycurrentThis object identifies the status of the copper auto speed downshift feature. noDownshift indicates that an automatic downshift of the copper speed has not occ…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2Tablecm1110ConfigTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1Rowcm1110ConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.2Columncm1110ConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.3Columncm1110ConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.4Columncm1110ConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.5Columncm1110ConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.6Columncm1110ConfigFiberFaultAlertread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. For 100 Mbps SFP modules, this setting is always effectively enabled if Link Mode is…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.7Columncm1110ConfigMaxPacketsSizeread-writecurrentThis object identifies the media converter module's maximum packet size setting This object is read-only if the media converter module's ConfigMode jumper is s…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.8Columncm1110ConfigFiberPortNameread-writecurrentThis object identifies a user definable name for the fiber port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.9Columncm1110ConfigFiberPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.10Columncm1110ConfigFiberAutoNegotiationread-writecurrentThis object identifies whether fiber auto-negotiation is enabled. This object does not apply if the fiber connector type is a 100 Mbps SFP module. This object …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.11Columncm1110ConfigFiberSfp100duplexread-writecurrentIf the fiber connector type is SFP and it is a 100 Mbps fiber module then this object identifies the duplex setting for the 100 Mbps fiber port. Duplex for 100…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.12Columncm1110ConfigCopperPortNameread-writecurrentThis object identifies a user definable name for the copper port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.13Columncm1110ConfigCopperPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.14Columncm1110ConfigCopperAutoNegotiationread-writecurrentThis object identifies the whether copper auto-negotiation is enabled. This object is read-only if the media converter module's ConfigMode jumper is set to har…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.15Columncm1110ConfigCopperAutoNegAdv10HDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 10Mbps, half duplex. This setting is ignored when auto-negotiation is disa…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.16Columncm1110ConfigCopperAutoNegAdv10FDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 10Mbps, full duplex. This setting is ignored when auto-negotiation is disa…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.17Columncm1110ConfigCopperAutoNegAdv100HDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 100Mbps, half duplex. This setting is ignored when auto-negotiation is dis…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.18Columncm1110ConfigCopperAutoNegAdv100FDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 100Mbps, full duplex. This setting is ignored when auto-negotiation is dis…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.19Columncm1110ConfigCopperAutoNegAdv1000FDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 1000Mbps, full duplex. This setting is ignored when auto-negotiation is di…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.20Columncm1110ConfigCopperSpeedread-writecurrentIf copper auto-negotiation is disabled then this object identifies the configured cooper speed. 1000 Mbps speed can only be auto negotiated. If copper auto-neg…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.21Columncm1110ConfigCopperDuplexread-writecurrentIf copper auto-negotiation is disabled then this object identifies the duplex setting for 10 & 100 Mbps for the copper port. Duplex for 1000 Mbps has to be aut…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.22Columncm1110ConfigCopperCrossOverread-writecurrentThis object identifies the copper MDI/MDI-X setting.This object is read-only if the media converter module's ConfigMode jumper is set to
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.23Columncm1110ConfigCopperPauseEnhread-writecurrentThis object identifies the copper pause (flow control) setting that is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrica…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.24Columncm1110ConfigCopperAutoSpeedDownshiftread-writecurrentThis object identifies the number of times the PHY attempts to establish a Gigabit link before the PHY downshift to the next highest speed. A value of 0 indica…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.25Columncm1110ConfigCopper10BaseTDistanceread-writecurrentWhen using cable exceeding 100 meters in 10BASE-T mode this feature should be set to extended(1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.26Columncm1110ConfigUnidirectionalEthernetread-writecurrentRestrict the flow of Ethernet traffic to a single direction. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.27Columncm1110ConfigPriorityToEgressQueueMap0read-writecurrentSet the egress queue of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.28Columncm1110ConfigPriorityToEgressQueueMap1read-writecurrentSet the egress queue of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.29Columncm1110ConfigPriorityToEgressQueueMap2read-writecurrentSet the egress queue of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.30Columncm1110ConfigPriorityToEgressQueueMap3read-writecurrentSet the egress queue of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.31Columncm1110ConfigPriorityToEgressQueueMap4read-writecurrentSet the egress queue of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.32Columncm1110ConfigPriorityToEgressQueueMap5read-writecurrentSet the egress queue of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.33Columncm1110ConfigPriorityToEgressQueueMap6read-writecurrentSet the egress queue of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.34Columncm1110ConfigPriorityToEgressQueueMap7read-writecurrentSet the egress queue of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.35Columncm1110ConfigCopper8021pPriorityread-writecurrentUse 802.1p tag priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.36Columncm1110ConfigCopperIpTosPriorityread-writecurrentUse IP TOS priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.37Columncm1110ConfigCopperPriorityPrecedenceread-writecurrentConfigure priority precedence. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.38Columncm1110ConfigCopperCongestionPolicyread-writecurrentConfigure priority congestion policy. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.39Columncm1110ConfigCopperPriorityMap0read-writecurrentChange the priority of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.40Columncm1110ConfigCopperPriorityMap1read-writecurrentChange the priority of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.41Columncm1110ConfigCopperPriorityMap2read-writecurrentChange the priority of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.42Columncm1110ConfigCopperPriorityMap3read-writecurrentChange the priority of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.43Columncm1110ConfigCopperPriorityMap4read-writecurrentChange the priority of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.44Columncm1110ConfigCopperPriorityMap5read-writecurrentChange the priority of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.45Columncm1110ConfigCopperPriorityMap6read-writecurrentChange the priority of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.46Columncm1110ConfigCopperPriorityMap7read-writecurrentChange the priority of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.47Columncm1110ConfigCopperIngressLimitread-writecurrentSet a limit on the rate of incoming packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.48Columncm1110ConfigCopperEgressLimitread-writecurrentSet a limit on the rate of outgoing packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.49Columncm1110ConfigCopperDiscardTaggedFramesread-writecurrentEnable discarding of tagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.50Columncm1110ConfigCopperDiscardUntaggedFramesread-writecurrentEnable discarding of untagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.51Columncm1110ConfigCopperDefaultVlanIdread-writecurrentSet the default VLAN ID to insert when tagging frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.52Columncm1110ConfigCopperDefaultPriorityread-writecurrentSet the default frame priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.53Columncm1110ConfigCopperVlanTaggingActionread-writecurrentSet the default tagging action. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.54Columncm1110ConfigCopperFilterUnknownMulticastread-writecurrentEnable filtering of multicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.55Columncm1110ConfigCopperFilterUnknownUnicastread-writecurrentEnable filtering of unicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.56Columncm1110ConfigFiber8021pPriorityread-writecurrentUse 802.1p tag priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.57Columncm1110ConfigFiberIpTosPriorityread-writecurrentUse IP TOS priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.58Columncm1110ConfigFiberPriorityPrecedenceread-writecurrentConfigure priority precedence. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.59Columncm1110ConfigFiberCongestionPolicyread-writecurrentConfigure priority congestion policy. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.60Columncm1110ConfigFiberPriorityMap0read-writecurrentChange the priority of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.61Columncm1110ConfigFiberPriorityMap1read-writecurrentChange the priority of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.62Columncm1110ConfigFiberPriorityMap2read-writecurrentChange the priority of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.63Columncm1110ConfigFiberPriorityMap3read-writecurrentChange the priority of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.64Columncm1110ConfigFiberPriorityMap4read-writecurrentChange the priority of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.65Columncm1110ConfigFiberPriorityMap5read-writecurrentChange the priority of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.66Columncm1110ConfigFiberPriorityMap6read-writecurrentChange the priority of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.67Columncm1110ConfigFiberPriorityMap7read-writecurrentChange the priority of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.68Columncm1110ConfigFiberIngressLimitread-writecurrentSet a limit on the rate of incoming packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.69Columncm1110ConfigFiberEgressLimitread-writecurrentSet a limit on the rate of outgoing packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.70Columncm1110ConfigFiberDiscardTaggedFramesread-writecurrentEnable discarding of tagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.71Columncm1110ConfigFiberDiscardUntaggedFramesread-writecurrentEnable discarding of untagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.72Columncm1110ConfigFiberDefaultVlanIdread-writecurrentSet the default VLAN ID to insert when tagging frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.73Columncm1110ConfigFiberDefaultPriorityread-writecurrentSet the default frame priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.74Columncm1110ConfigFiberVlanTaggingActionread-writecurrentSet the default tagging action. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.75Columncm1110ConfigFiberFilterUnknownMulticastread-writecurrentEnable filtering of multicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.76Columncm1110ConfigFiberFilterUnknownUnicastread-writecurrentEnable filtering of unicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.77Columncm1110ConfigFiberSgmiiInterfaceread-writecurrentThis object identifies whether fiber SGMII interface is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3Tablecm1110LedTablenot-accessiblecurrentTable of CM-1110 type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1Rowcm1110LedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.2Columncm1110LedSlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.3Columncm1110LedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.4Columncm1110LedFDFread-onlycurrentThis object identifies the status of the Full Duplex Fiber (FDF) LED on the media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.5Columncm1110LedLKFread-onlycurrentThis object identifies the status of the link fiber (LKF) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber l…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.6Columncm1110LedCopperSpeedread-onlycurrentThis object identifies the status of the link copper speed (100/1000) LED on the management module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.7Columncm1110LedFDCread-onlycurrentThis object identifies the status of the Full Duplex Copper (FDC) LED on the media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.8Columncm1110LedLKCread-onlycurrentThis object identifies the status of the link copper (LKC) LED on the media converter module. Possible status values are: off(0) - No copper link on(1) - Coppe…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4Tablecm1110RateConvStatsTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1Rowcm1110RateConvStatsEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.2Columncm1110StatsSlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.3Columncm1110MediaPortIndexnot-accessiblecurrentMedia converter module port index indicating which media port the statistical counters are associated with.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.4Columncm1110PortInDiscardsread-onlycurrentA counter that counts the number of good, non-filtered frames that normally would have been forwarded, but could not due to lack of buffer space.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.5Columncm1110PortInFilteredread-onlycurrentA counter that counts the number of good frames that were filtered due to ingress switch policy rules.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.6Columncm1110PortInGoodOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all good Ethernet frames received on the media port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.7Columncm1110PortHCInGoodOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all good Ethernet frames received on the media port. This object is a 64-bit version of cm1110PortInGoodOctets.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.8Columncm1110PortInBadOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all bad Ethernet frames received on the media port..
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.9Columncm1110PortInUnicastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Unicast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.10Columncm1110PortInBroadcastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Broadcast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.11Columncm1110PortInMulticastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Multicast destination MAC address. This count does not include frames counted in …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.12Columncm1110PortInPausesread-onlycurrentAn ingress counter that counts the number of good frames reachieved that have a Pause destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.13Columncm1110PortInUnderSizesread-onlycurrentAn ingress counter that counts the number of frames received with a length less that 64 octets but with a valid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.14Columncm1110PortInFragmentsread-onlycurrentAn ingress counter that counts the number of frames received with a length less that 64 octets and an invalid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.15Columncm1110PortInOversizesread-onlycurrentAn ingress counter that counts the number of frames received with a length more than the maximum packet size but with a valid FCS. The maximum packet size can …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.16Columncm1110PortInJabbersread-onlycurrentAn ingress counter that counts the number of frames received with a length more than the maximum packet size but with a invalid FCS. The maximum packet size ca…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.17Columncm1110PortInRxErrsread-onlycurrentAn ingress counter that counts the number of frames received with an RxErr signal from the PHY.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.18Columncm1110PortInFcsErrsread-onlycurrentAn ingress counter that counts the number of frames received with a CRC error not counted in the cm1110PortInFragments, cm1110PortInFcsErr, or the cm1110PortIn…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.19Columncm1110PortPkts64Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of exactly 64 Octets, including those with errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.20Columncm1110PortPkts65to127Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 65 and 127 Octets inclusive, including those with errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.21Columncm1110PortPkts128to255Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 128 and 255 Octets inclusive, including those with error…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.22Columncm1110PortPkts256to511Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 256 and 511 Octets inclusive, including those with error…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.23Columncm1110PortPkts512to1023Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 512 and 1023 Octets inclusive, including those with erro…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.24Columncm1110PortPkts1024toMaxOctetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 1024 and maximum packet size octets inclusive, including…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.25Columncm1110PortOutOctetsread-onlycurrentAn Egress counter that is the sum of lengths of all good Ethernet frames sent on the media port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.26Columncm1110PortHCOutOctetsread-onlycurrentAn Egress counter that is the sum of lengths of all good Ethernet frames sent on the media port. This object is a 64-bit version of cm1110PortOutOctets.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.27Columncm1110PortOutFilteredread-onlycurrentA counter that counts the number of good frames that were filtered due to egress switch policy rules.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.28Columncm1110PortOutUnicastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Unicast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.29Columncm1110PortOutBroadcastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Broadcast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.30Columncm1110PortOutMulticastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Multicast destination MAC address. This count does not include frames counted in the c…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.31Columncm1110PortOutPausesread-onlycurrentAn Egress counter that counts the number of good frames reachieved that have a Pause destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.32Columncm1110PortDeferredsread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced no collisions but are delayed because the medium was busy during t…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.33Columncm1110PortCollisionsread-onlycurrentAn Egress counter that counts the number of collision events seen by the MAC not including those counted in cm1110PortSingles, cm1110PortMultiple , cm1110PortE…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.34Columncm1110PortSinglesread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced exactly one collision. This counter is applicable in half-duplex o…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.35Columncm1110PortMultiplesread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced more than one collision. This counter is aplicable in half-duplex …
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.36Columncm1110PortExcessivesread-onlycurrentAn Egress counter that counts the number frames dropped in the transmit MAC because the frame experienced 16 consecutive collisions. This counter is applicable…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.37Columncm1110PortLatesread-onlycurrentAn Egress counter that counts the number times a collision is detected later than 512 bits-times into the transmission of a frame. This counter is applicable i…
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.38Columncm1110PortOutFcsErrsread-onlycurrentAn Egress counter that counts the number frames transmitted with an invalid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.39Columncm1110PortResetCountersread-writecurrentAllows the resetting of all cm1110RateConvStats statistical counters for this port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5Tablecm1110RateConvAvctTablenot-accessiblecurrentTable of CM-1110 type media converter module's
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1Rowcm1110RateConvAvctEntrynot-accessiblecurrentEntries of the table, each relating to a separate fiber or copper port on the CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.2Columncm1110AvctSlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.3Columncm1110AvctStartread-writecurrentSet this self-clearing variable to yes initiate the Advanced Virtual Cable Test. Note: During the test, no network data will be passed.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.4Columncm1110AvctStatusread-onlycurrentThis object identifies the state of the Advanced Virtual Cable Tester.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.5Columncm1110AvctTxRxPair1Resultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx/Rx pair one.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.6Columncm1110AvctTxRxPair1Amplituderead-onlycurrentAmplitude of Tx/Rx pair one in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.7Columncm1110AvctTxRxPair1Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair one is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.8Columncm1110AvctTxRxPair2Resultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx/Rx pair two.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.9Columncm1110AvctTxRxPair2Amplituderead-onlycurrentAmplitude of Tx/Rx pair two in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.10Columncm1110AvctTxRxPair2Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair two is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.11Columncm1110AvctTxRxPair3Resultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx/Rx pair three.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.12Columncm1110AvctTxRxPair3Amplituderead-onlycurrentAmplitude of Tx/Rx pair three in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.13Columncm1110AvctTxRxPair3Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair three is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.14Columncm1110AvctTxRxPair4Resultsread-onlycurrentTest result code returned from Virtual Cable Test of Tx/Rx pair four.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.15Columncm1110AvctTxRxPair4Amplituderead-onlycurrentAmplitude of Tx/Rx pair four in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.16Columncm1110AvctTxRxPair4Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair four is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4Nodecm110RateConv
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1Tablecm110RateConvTablenot-accessiblecurrentTable of CM-110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1Rowcm110RateConvEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.2Columncm110SlotIndexnot-accessiblecurrentThe Slot number the CM-110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.3Columncm110Modelnameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.4Columncm110ModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.5Columncm110HwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware switch on the media converter module. When this object is set to hardwareSwitch…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.6Columncm110HwJmp6AutoMDIXread-onlycurrentThis object identifies the media converter module's hardware Auto MDIX jumper settings.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.7Columncm110HwSw1TpAutoNegotiationread-onlycurrentMedia converter module's current switch setting for copper auto-negotiation.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.8Columncm110HwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.9Columncm110HwSw3FarEndFaultread-onlycurrentMedia converter module's current switch setting for Far End Fault.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.10Columncm110HwSw4TpDuplexread-onlycurrentMedia converter module's current switch setting for copper duplex.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.11Columncm110HwSw5TpSpeedread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.12Columncm110HwSw6FiberDuplexread-onlycurrentMedia converter module's current switch setting for fiber duplex.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.13Columncm110HwSw7Loopbackread-onlycurrentMedia converter module's current switch setting for fiber loopback mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.14Columncm110FiberLinkStatusread-onlycurrentMedia converter module's current fiber link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.15Columncm110FiberConnTyperead-onlycurrentMedia converter module's fiber port connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.16Columncm110FiberSpeedread-onlycurrentMedia converter module's fiber port speed in megabits per second.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.17Columncm110FiberFarEndFaultread-onlycurrentMedia converter module's current fiber Far End Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.18Columncm110FiberReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.19Columncm110FiberLoopBackread-writecurrentThis object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.20Columncm110CopperLinkStatusread-onlycurrentMedia converter module's current copper link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.21Columncm110CopperConnTyperead-onlycurrentMedia converter module's copper connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.22Columncm110CopperAutoNegStateread-onlycurrentMedia converter module's current copper auto-negotiation state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.23Columncm110CopperSpeedread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated speed setting. If auto-nego…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.24Columncm110CopperDuplexread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated duplex setting. If auto-neg…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.25Columncm110CopperCrossOverread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.26Columncm110CopperPauseread-onlycurrentIf copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated pause (flow control) settin…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.27Columncm110CopperLPRFStatusread-onlycurrentMedia converter module's fiber Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2Tablecm110ConfigTablenot-accessiblecurrentTable of CM-110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1Rowcm110ConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.2Columncm110ConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.3Columncm110ConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.4Columncm110ConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.5Columncm110ConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.6Columncm110ConfigFiberFarEndFaultread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. This setting is always enabled if Link Mode is set to linkPassthrough. This object i…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.7Columncm110ConfigMaxPacketSizeread-writecurrentThis object identifies the media converter module's maximum packet size setting This object is read-only if the media converter module's ConfigMode jumper is s…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.8Columncm110ConfigFiberPortNameread-writecurrentThis object identifies a user definable name for the fiber port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.9Columncm110ConfigFiberPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.10Columncm110ConfigFiberDuplexread-onlycurrentThis object identifies the fiber port duplex setting.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.11Columncm110ConfigCopperPortNameread-writecurrentThis object identifies a user definable name for the copper port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.12Columncm110ConfigCopperPortEnableread-writecurrentThis object identifies whether the fiber port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.13Columncm110ConfigCopperAutoNegotiationread-writecurrentThis object identifies the whether copper auto-negotiation is enabled. This object is read-only if the media converter module's ConfigMode jumper is set to har…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.14Columncm110ConfigCopperAutoNegAdv10HDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 10Mbps, half duplex. This setting is ignored when auto-negotiation is disa…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.15Columncm110ConfigCopperAutoNegAdv10FDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 10Mbps, full duplex. This setting is ignored when auto-negotiation is disa…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.16Columncm110ConfigCopperAutoNegAdv100HDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 100Mbps, half duplex. This setting is ignored when auto-negotiation is dis…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.17Columncm110ConfigCopperAutoNegAdv100FDXread-writecurrentThis object controls whether or the copper port advertises willingness to connect at 100Mbps, full duplex. This setting is ignored when auto-negotiation is dis…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.18Columncm110ConfigCopperSpeedread-writecurrentThis object identifies the current copper speed in megabits per second. This object is ignored if auto-negotiation is enabled. This object is ignored if auto-n…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.19Columncm110ConfigCopperDuplexread-writecurrentThis object identifies the copper duplex setting. This object is ignored if auto-negotiation is enabled This object is read-only if the media converter module'…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.20Columncm110ConfigCopperCrossOverread-writecurrentThis object identifies the copper MDI/MDI-X setting.This object is read-only if the media converter module's ConfigMode jumper is set to
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.21Columncm110ConfigCopperPauseread-writecurrentThis object identifies the copper's pause (flow control) settings. This object is read-only if the media converter module's ConfigMode jumper is set to hardwar…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.22Columncm110ConfigCopperExtendDistanceread-writecurrentWhen using cable exceeding 100 meters, the 10BASE-T this feature should be enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.23Columncm110ConfigUnidirectionalEthernetread-writecurrentRestrict the flow of Ethernet traffic to a single direction. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.24Columncm110ConfigPriorityToEgressQueueMap0read-writecurrentSet the egress queue of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.25Columncm110ConfigPriorityToEgressQueueMap1read-writecurrentSet the egress queue of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.26Columncm110ConfigPriorityToEgressQueueMap2read-writecurrentSet the egress queue of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.27Columncm110ConfigPriorityToEgressQueueMap3read-writecurrentSet the egress queue of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.28Columncm110ConfigPriorityToEgressQueueMap4read-writecurrentSet the egress queue of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.29Columncm110ConfigPriorityToEgressQueueMap5read-writecurrentSet the egress queue of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.30Columncm110ConfigPriorityToEgressQueueMap6read-writecurrentSet the egress queue of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.31Columncm110ConfigPriorityToEgressQueueMap7read-writecurrentSet the egress queue of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.32Columncm110ConfigCopper8021pPriorityread-writecurrentUse 802.1p tag priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.33Columncm110ConfigCopperIpTosPriorityread-writecurrentUse IP TOS priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.34Columncm110ConfigCopperPriorityPrecedenceread-writecurrentConfigure priority precedence. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.35Columncm110ConfigCopperCongestionPolicyread-writecurrentConfigure priority congestion policy. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.36Columncm110ConfigCopperPriorityMap0read-writecurrentChange the priority of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.37Columncm110ConfigCopperPriorityMap1read-writecurrentChange the priority of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.38Columncm110ConfigCopperPriorityMap2read-writecurrentChange the priority of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.39Columncm110ConfigCopperPriorityMap3read-writecurrentChange the priority of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.40Columncm110ConfigCopperPriorityMap4read-writecurrentChange the priority of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.41Columncm110ConfigCopperPriorityMap5read-writecurrentChange the priority of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.42Columncm110ConfigCopperPriorityMap6read-writecurrentChange the priority of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.43Columncm110ConfigCopperPriorityMap7read-writecurrentChange the priority of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.44Columncm110ConfigCopperIngressLimitread-writecurrentSet a limit on the rate of incoming packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.45Columncm110ConfigCopperEgressLimitread-writecurrentSet a limit on the rate of outgoing packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.46Columncm110ConfigCopperDiscardTaggedFramesread-writecurrentEnable discarding of tagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.47Columncm110ConfigCopperDiscardUntaggedFramesread-writecurrentEnable discarding of untagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.48Columncm110ConfigCopperDefaultVlanIdread-writecurrentSet the default VLAN ID to insert when tagging frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.49Columncm110ConfigCopperDefaultPriorityread-writecurrentSet the default frame priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.50Columncm110ConfigCopperVlanTaggingActionread-writecurrentSet the default tagging action. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.51Columncm110ConfigCopperFilterUnknownMulticastread-writecurrentEnable filtering of multicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.52Columncm110ConfigCopperFilterUnknownUnicastread-writecurrentEnable filtering of unicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.53Columncm110ConfigFiber8021pPriorityread-writecurrentUse 802.1p tag priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.54Columncm110ConfigFiberIpTosPriorityread-writecurrentUse IP TOS priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.55Columncm110ConfigFiberPriorityPrecedenceread-writecurrentConfigure priority precedence. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.56Columncm110ConfigFiberCongestionPolicyread-writecurrentConfigure priority congestion policy. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.57Columncm110ConfigFiberPriorityMap0read-writecurrentChange the priority of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.58Columncm110ConfigFiberPriorityMap1read-writecurrentChange the priority of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.59Columncm110ConfigFiberPriorityMap2read-writecurrentChange the priority of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.60Columncm110ConfigFiberPriorityMap3read-writecurrentChange the priority of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.61Columncm110ConfigFiberPriorityMap4read-writecurrentChange the priority of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.62Columncm110ConfigFiberPriorityMap5read-writecurrentChange the priority of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.63Columncm110ConfigFiberPriorityMap6read-writecurrentChange the priority of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.64Columncm110ConfigFiberPriorityMap7read-writecurrentChange the priority of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.65Columncm110ConfigFiberIngressLimitread-writecurrentSet a limit on the rate of incoming packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.66Columncm110ConfigFiberEgressLimitread-writecurrentSet a limit on the rate of outgoing packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.67Columncm110ConfigFiberDiscardTaggedFramesread-writecurrentEnable discarding of tagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.68Columncm110ConfigFiberDiscardUntaggedFramesread-writecurrentEnable discarding of untagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.69Columncm110ConfigFiberDefaultVlanIdread-writecurrentSet the default VLAN ID to insert when tagging frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.70Columncm110ConfigFiberDefaultPriorityread-writecurrentSet the default frame priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.71Columncm110ConfigFiberVlanTaggingActionread-writecurrentSet the default tagging action. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.72Columncm110ConfigFiberFilterUnknownMulticastread-writecurrentEnable filtering of multicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.73Columncm110ConfigFiberFilterUnknownUnicastread-writecurrentEnable filtering of unicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3Tablecm110LedTablenot-accessiblecurrentTable of CM-110 type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1Rowcm110LedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.2Columncm110LedSlotIndexnot-accessiblecurrentThe Slot number the CM-110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.3Columncm110LedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.4Columncm110LedFDFread-onlycurrentThis object identifies the status of the Full Duplex Fiber (FDF) LED on the media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.5Columncm110LedLKFread-onlycurrentThis object identifies the status of the link fiber (LKF) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber l…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.6Columncm110LedCopperSpeedread-onlycurrentThis object identifies the status of the link copper speed (100/1000) LED on the media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.7Columncm110LedFDCread-onlycurrentThis object identifies the status of the Full Duplex Copper (FDC) LED on the media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.8Columncm110LedLKCread-onlycurrentThis object identifies the status of the link copper (LKC) LED on the media converter module. Possible status values are: off(0) - No copper link on(1) - Coppe…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4Tablecm110RateConvStatsTablenot-accessiblecurrentTable of CM-110 media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1Rowcm110RateConvStatsEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.2Columncm110StatsSlotIndexnot-accessiblecurrentThe Slot number the CM-110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.3Columncm110MediaPortIndexnot-accessiblecurrentMedia converter module port index indicating which media port the statistical counters are associated with.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.4Columncm110PortRxErrorsread-onlycurrentTotal number of bad frames received.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.5Columncm110PortTxCollisionsread-onlycurrentTotal number of TX collisions encountered.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.6Columncm110PortInFilteredread-onlycurrentA counter that counts the number of good frames that were filtered due to ingress switch policy rules.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.7Columncm110PortInGoodOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all good Ethernet frames received on the media port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.8Columncm110PortInBadOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all bad Ethernet frames received on the media port..
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.9Columncm110PortInUnicastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Unicast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.10Columncm110PortInBroadcastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Broadcast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.11Columncm110PortInMulticastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Multicast destination MAC address. This count does not include frames counted in …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.12Columncm110PortInPausesread-onlycurrentAn ingress counter that counts the number of good frames received that have a Pause destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.13Columncm110PortInUnderSizesread-onlycurrentAn ingress counter that counts the number of frames received with a length less that 64 octets but with a valid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.14Columncm110PortInFragmentsread-onlycurrentAn ingress counter that counts the number of frames received with a length less that 64 octets and an invalid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.15Columncm110PortInOversizesread-onlycurrentAn ingress counter that counts the number of frames received with a length more than the maximum packet size but with a valid FCS. The maximum packet size can …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.16Columncm110PortInJabbersread-onlycurrentAn ingress counter that counts the number of frames received with a length more than the maximum packet size but with a invalid FCS. The maximum packet size ca…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.17Columncm110PortInMACRcvErrsread-onlycurrentAn ingress counter of the number of Rx errors on the receive side of the MAC
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.18Columncm110PortInFcsErrsread-onlycurrentAn ingress counter of the number of FCS Errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.19Columncm110PortPkts64Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of exactly 64 Octets, including those with errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.20Columncm110PortPkts65to127Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 65 and 127 Octets inclusive, including those with errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.21Columncm110PortPkts128to255Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 128 and 255 Octets inclusive, including those with error…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.22Columncm110PortPkts256to511Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 256 and 511 Octets inclusive, including those with error…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.23Columncm110PortPkts512to1023Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 512 and 1023 Octets inclusive, including those with erro…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.24Columncm110PortPkts1024toMaxOctetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 1024 and maximum packet size octets inclusive, including…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.25Columncm110PortOutOctetsread-onlycurrentAn Egress counter that is the sum of lengths of all good Ethernet frames sent on the media port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.26Columncm110PortOutUnicastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Unicast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.27Columncm110PortOutBroadcastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Broadcast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.28Columncm110PortOutMulticastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Multicast destination MAC address. This count does not include frames counted in the c…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.29Columncm110PortOutPausesread-onlycurrentAn Egress counter that counts the number of good frames received that have a Pause destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.30Columncm110PortDeferredsread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced no collsions but are delayed because the medium was busy during th…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.31Columncm110PortCollisionsread-onlycurrentAn Egress counter that counts the number of collision events seen by the MAC not including those counted in cm110PortSingles, cm110PortMultiple , cm1110PortExc…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.32Columncm110PortSinglesread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced exactly one collision. This counter is applicable in half-duplex o…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.33Columncm110PortMultiplesread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced more than one collision. This counter is aplicable in half-duplex …
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.34Columncm110PortExcessivesread-onlycurrentAn Egress counter that counts the number frames dropped in the transmit MAC because the frame experienced 16 consecutive collisions. This counter is applicable…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.35Columncm110PortLatesread-onlycurrentAn Egress counter that counts the number times a collision is detected later than 512 bits-times into the transmission of a frame. This counter is applicable i…
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.36Columncm110PortOutFcsErrsread-onlycurrentAn Egress counter that counts the number frames transmitted with an invalid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.37Columncm110PortResetCountersread-writecurrentAllows the resetting of all cm110RateConvStats statistical counters for this port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5Tablecm110RateConvVctTablenot-accessiblecurrentTable of CM-110 type media converter module's
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1Rowcm110RateConvVctEntrynot-accessiblecurrentEntries of the table, each relating to a separate fiber or copper port on the CM-110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.2Columncm110VctSlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.3Columncm110VctStartread-writecurrentSet this self-clearing variable to yes initiate the Advanced Virtual Cable Test. Note: During the test, no network data will be passed.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.4Columncm110VctStatusread-onlycurrentThis object identifies the stat of the Advanced Virtual Cable Test.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.5Columncm110VctTxPairResultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx pair.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.6Columncm110VctTxPairAmplituderead-onlycurrentAmplitude of Tx pair in Volts.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.7Columncm110VctTxPairDistanceread-onlycurrentDistance in meters to fault when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.8Columncm110VctRxPairResultsread-onlycurrentTest result code returned from Virtual Cable Test of the Rx pair.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.9Columncm110VctRxPairAmplituderead-onlycurrentAmplitude of Rx pair in Volts.
1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.10Columncm110VctRxPairDistanceread-onlycurrentDistance in meters to fault when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5NodemcrMgt
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1TablemcrMgtTablenot-accessiblecurrentTable of MCR-MGT management module status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1RowmcrMgtEntrynot-accessiblecurrentEntries of the table, each relating to a separate MCR-MGT type management module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.2ColumnmcrMgtSlotIndexnot-accessiblecurrentThe Slot number the MCR-MGT module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.3ColumnmcrMgtModelNameread-onlycurrentThis object identifies the model name of management module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.4ColumnmcrMgtModelDescread-onlycurrentThis object identifies a static description of the management module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.5ColumnmcrMgtFailSafeBootLoaderVerread-onlycurrentThis object identifies the fail-safe bootloader version of the management module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.6ColumnmcrMgtUpTimeread-onlycurrentThis object identifies the time (in hundredths of a second) since the management module was last re-initialized.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.7ColumnmcrMgtConsoleDSRread-onlycurrentThis object identifies the current status of the DSR signal, (active or inactive)
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2TablemcrMgtConfigTablenot-accessiblecurrentTable of MCR-MGT management module Hardware configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1RowmcrMgtConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate MCR-MGT type management module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.2ColumnmcrMgtConfigSlotIndexnot-accessiblecurrentThe Slot number the MCR-MGT module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.3ColumnmcrMgtConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.4ColumnmcrMgtConfigEthSpeedDuplexread-writecurrentDefine the Ethernet connection speed/duplex of the twisted pair interface.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.5ColumnmcrMgtConfigEthCrossoverread-writecurrentDefine the Ethernet connection crossover TX/RX Pair orientation of the twisted pair interface as auto(0), mdi(1) (straight through) or mdix(2) (crossed over).
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.6ColumnmcrMgtConfigConsolePortEnabledread-writecurrentDetermines whether the management module's console port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.7ColumnmcrMgtConfigConsoleSpeedread-writecurrentSpecifies the baud rate of the console port; keep in mind that speed is affected by the length of the cable.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.8ColumnmcrMgtConfigConsoleDataBitsread-writecurrentSpecifies the number of bits in a byte.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.9ColumnmcrMgtConfigConsoleParityread-writecurrentSpecifies if you are using Even, Odd, or No parity on the console.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.10ColumnmcrMgtConfigConsoleStopBitsread-writecurrentSpecifies the number of stop bits that follow a byte.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.11ColumnmcrMgtConfigConsoleFlowControlread-writecurrentDefines whether the data flow is handled by the software (Soft), hardware (Hard), both or None.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.12ColumnmcrMgtConfigConsoleMonitorDSRread-writecurrentSpecifies whether the RS-232 signal DSR (Data Set Ready) should be monitored, for the console port. When DSR is monitored and the management module detects the…
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3TablemcrMgtLedTablenot-accessiblecurrentTable of MCR-MGT management module LED information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1RowmcrMgtLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate MCR-MGT type management module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.2ColumnmcrMgtLedSlotIndexnot-accessiblecurrentThe Slot number the MCR-MGT module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.3ColumnmcrMgtLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the management module. Possible status values are: off(0) - No power to the module onGreen(1) - Pow…
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.4ColumnmcrMgtLedALMread-onlycurrentThis object identifies the status of the alarm (ALM) LED on the management module. Possible status values are: offNoAlarms(0) - Normal operating condition onRe…
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.5ColumnmcrMgtLedLKCread-onlycurrentThis object identifies the status of the link copper (LKC) LED on the management module. Possible status values are: offLinkDown(0) - Copper link status is DOW…
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.6ColumnmcrMgtLedCopperSpeedread-onlycurrentThis object identifies the status of the link copper speed (100/1000) LED on the management module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4TablemcrMgtEthStatsTablenot-accessiblecurrentTable of MCR-MGT management module Ethernet status and statistics information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1RowmcrMgtEthStatsEntrynot-accessiblecurrentAn entry in the Ethernet statistics table, each relating to an Ethernet interface.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.2ColumnmgtEthSlotIndexnot-accessiblecurrentThe Slot number the MCR-MGT module is currently inserted.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.3ColumnmgtEthStatsIfIndexnot-accessiblecurrentThe Ethernet interface number.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.4ColumnmgtEthStatsNameread-onlycurrentDisplays Ethernet interface name.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.5ColumnmgtEthStatsMacAddressread-onlycurrentDisplays the MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.6ColumnmgtEthStatsStatusread-onlycurrentDisplays the Ethernet link status - down(0) or up(1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.7ColumnmgtEthStatsSpeedDuplexread-onlycurrentCurrent status of the Ethernet connection speed/duplex twisted pair interface. When the management module does not know the pair speed/duplex, this variable ha…
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.8ColumnmgtEthStatsBroadcastread-onlycurrentThe management module's Ethernet Broadcast Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.9ColumnmgtEthStatsDebugread-onlycurrentThe management module's Ethernet Debug Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.10ColumnmgtEthStatsLoopbackread-onlycurrentThe management module's Ethernet Loopback Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.11ColumnmgtEthStatsPointtoPointread-onlycurrentThe management module's Ethernet Point to Point Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.12ColumnmgtEthStatsNoTrailersread-onlycurrentThe management module's Ethernet No Trailers Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.13ColumnmgtEthStatsRunningread-onlycurrentThe management module's Ethernet Running Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.14ColumnmgtEthStatsNoArpread-onlycurrentThe management module's Ethernet No Arp Protocol Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.15ColumnmgtEthStatsPromiscuousread-onlycurrentThe management module's Ethernet Promiscuous Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.16ColumnmgtEthStatsRxMulticastread-onlycurrentThe management module's Ethernet Receive all Multicast Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.17ColumnmgtEthStatsMasterLoadBalancerread-onlycurrentThe management module's Ethernet Master Load Balancer Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.18ColumnmgtEthStatsSlaveLoadBalancerread-onlycurrentThe management module's Ethernet Slave Load Balancer Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.19ColumnmgtEthStatsMulticastread-onlycurrentThe management module's Ethernet Multicast Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.20ColumnmgtEthStatsSetMediaread-onlycurrentThe management module's Ethernet Set Media Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.21ColumnmgtEthStatsAutoMediaread-onlycurrentThe management module's Ethernet Auto Media Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.22ColumnmgtEthStatsDynamicread-onlycurrentThe management module's Ethernet Dynamic Flags status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.23ColumnmgtEthStatsLocalAddressread-onlycurrentThe management module's Ethernet local IPv4 address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.24ColumnmgtEthStatsSubnetMaskread-onlycurrentThe management module's Ethernet IPv4 subnet mask.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.25ColumnmgtEthStatsBroadcastAddressread-onlycurrentThe management module's Ethernet Broadcast address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.26ColumnmgtEthStatsMturead-onlycurrentThe management module's Ethernet MTU.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.27ColumnmgtEthStatsTxQLenread-onlycurrentThe management module's Ethernet TX Queue Length.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.28ColumnmgtEthStatsRxBytesread-onlycurrentThe management module's Ethernet RX Bytes count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.29ColumnmgtEthStatsTxBytesread-onlycurrentThe management module's Ethernet TX Bytes count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.30ColumnmgtEthStatsRxPacketsread-onlycurrentThe management module's Ethernet RX Packets count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.31ColumnmgtEthStatsTxPacketsread-onlycurrentThe management module's Ethernet TX Packets count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.32ColumnmgtEthStatsRxErrorsread-onlycurrentThe management module's Ethernet RX Packets Errors count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.33ColumnmgtEthStatsTxPktErrorsread-onlycurrentThe management module's Ethernet TX Packets Errors count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.34ColumnmgtEthStatsRxDroppedPktsread-onlycurrentThe management module's Ethernet RX Dropped packets count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.35ColumnmgtEthStatsTxDroppedPktsread-onlycurrentThe management module's Ethernet TX Dropped packets count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.36ColumnmgtEthStatsRxOverrunsread-onlycurrentThe management module's Ethernet RX Overruns count
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.37ColumnmgtEthStatsTxOverrunsread-onlycurrentThe management module's Ethernet TX Overruns count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.38ColumnmgtEthStatsRxFrameErrsread-onlycurrentThe management module's Ethernet RX Frame Errors count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.39ColumnmgtEthStatsTxCarrierErrsread-onlycurrentThe management module's Ethernet TX Carrier Errors count
1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.40ColumnmgtEthStatsCollisionsread-onlycurrentThe management module's Ethernet Collisions count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6Nodecm1000mmFixed
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1Tablecm1000mmFixedTablenot-accessiblecurrentTable of CM-1000MM type media converter module's status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1Rowcm1000mmFixedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000MM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.2Columncm1000mmSlotIndexnot-accessiblecurrentThe Slot number the CM-1000MM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.3Columncm1000mmModelnameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.4Columncm1000mmModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.5Columncm1000mmHwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwi…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.6Columncm1000mmHwSw1FiberAutoNegread-onlycurrentMedia converter module's current switch setting for fiber Auto-Negotiation.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.7Columncm1000mmHwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.8Columncm1000mmHwSw3FiberFaultAlertread-onlycurrentMedia converter module's current switch setting for Fiber Fault Alert.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.9Columncm1000mmHwSw4Loopback1read-onlycurrentMedia converter module's current switch setting for loopback (fiber port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.10Columncm1000mmHwSw5Loopback2read-onlycurrentMedia converter module's current switch setting for loopback (fiber port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.12Columncm1000mmFiber1LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.13Columncm1000mmFiber1ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.14Columncm1000mmFiber1AutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.15Columncm1000mmFiber1Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.16Columncm1000mmFiber1Duplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.17Columncm1000mmFiber1PauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.18Columncm1000mmFiber1LPRFStatusread-onlycurrentMedia converter module's fiber Link Partner Remote Fault status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.19Columncm1000mmFiber1ReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port (port 1)
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.20Columncm1000mmFiber2LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.21Columncm1000mmFiber2ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.22Columncm1000mmFiber2AutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.23Columncm1000mmFiber2Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.24Columncm1000mmFiber2Duplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.25Columncm1000mmFiber2PauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.26Columncm1000mmFiber2LPRFStatusread-onlycurrentMedia converter module's fiber Link Partner Remote Fault status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.27Columncm1000mmFiber2ReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port (port 2)
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.28Columncm1000mmFiberLoopBackread-writecurrentMedia converter module's current fiber loopback mode setting. Writing to this object will change the current settings. This object is read-only if the media co…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2Tablecm1000mmConfigTablenot-accessiblecurrentTable of CM-1000MM type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1Rowcm1000mmConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000MM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.2Columncm1000mmConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-1000MM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.3Columncm1000mmConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.4Columncm1000mmConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.5Columncm1000mmConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.6Columncm1000mmConfigFiberFaultAlertread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.7Columncm1000mmConfigJumboPacketsread-writecurrentThis object identifies the Jumbo Packet setting for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.8Columncm1000mmConfigFiberAutoNegread-writecurrentThis object identifies the wither fiber auto-negotiation is enabled for both ports. This object is read-only if the media module's ConfigMode jumper is set to …
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.9Columncm1000mmConfigFiber1PortNameread-writecurrentThis object identifies a user definable name for the fiber port (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.10Columncm1000mmConfigFiber1PortEnableread-writecurrentThis object identifies whether the fiber port is enabled (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.11Columncm1000mmConfigFiber2PortNameread-writecurrentThis object identifies a user definable name for the fiber port (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.12Columncm1000mmConfigFiber2PortEnableread-writecurrentThis object identifies whether the fiber port is enabled (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3Tablecm1000mmLedTablenot-accessiblecurrentTable of CM-1000MM type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1Rowcm1000mmLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1000MM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.2Columncm1000mmLedsSlotIndexnot-accessiblecurrentThe Slot number the CM-1000 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.3Columncm1000mmLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.4Columncm1000mmLedLK1read-onlycurrentThis object identifies the status of the link fiber port 1 (LK1) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - …
1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.5Columncm1000mmLedLK2read-onlycurrentThis object identifies the status of the link fiber port 2 (LK2) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - …
1.3.6.1.4.1.1966.21.1.1.1.1.4.7Nodecm100mmFixed
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1Tablecm100mmFixedTablenot-accessiblecurrentTable of CM-100MM type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1Rowcm100mmFixedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-100MM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.2Columncm100mmSlotIndexnot-accessiblecurrentThe Slot number the CM-100MM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.3Columncm100mmModelNameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.4Columncm100mmModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.5Columncm100mmHwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware switch on the media converter module. When this object is set to hardwareSwitch…
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.6Columncm100mmHwSw1LinkPassthroughread-onlycurrentMedia converter module's current switch setting for Link Passthrough.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.7Columncm100mmHwSw2FarEndFaultread-onlycurrentMedia converter module's current switch setting for Far-End Fault.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.8Columncm100mmHwSw3Loopback1read-onlycurrentMedia converter module's current switch setting for Loopback (fiber port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.9Columncm100mmHwSw4Loopback2read-onlycurrentMedia converter module's current switch setting for Loopback (fiber port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.12Columncm100mmFiber1LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.13Columncm100mmFiber1ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.14Columncm100mmFiber1Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.15Columncm100mmFiber1FarEndFaultread-onlycurrentMedia converter module's current fiber Far End Fault status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.16Columncm100mmFiber1ReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port (port 1)
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.17Columncm100mmFiber2LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.18Columncm100mmFiber2ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.19Columncm100mmFiber2Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.20Columncm100mmFiber2FarEndFaultread-onlycurrentMedia converter module's current fiber Far End Fault status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.21Columncm100mmFiber2ReceiveStatusread-writecurrentThis object identifies the status of whether light is being received on the fiber port (port 2)
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.22Columncm100mmFiberLoopBackread-writecurrentThis object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2Tablecm100mmConfigTablenot-accessiblecurrentTable of CM-100MM type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1Rowcm100mmConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-100MM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.2Columncm100mmConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-100MM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.3Columncm100mmConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.4Columncm100mmConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.5Columncm100mmConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.6Columncm100mmConfigFiberFarEndFaultread-writecurrentThis object identifies the fiber Far End Fault setting for the media module. This setting is always enabled if Link Mode is set to linkPassthrough. This object…
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.7Columncm100mmConfigFiber1PortNameread-writecurrentThis object identifies a user definable name for the fiber port (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.8Columncm100mmConfigFiber1PortEnableread-writecurrentThis object identifies whether the fiber port is enabled (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.9Columncm100mmConfigFiber2PortNameread-writecurrentThis object identifies a user definable name for the fiber port (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.10Columncm100mmConfigFiber2PortEnableread-writecurrentThis object identifies whether the fiber port is enabled (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3Tablecm100mmLedTablenot-accessiblecurrentTable of CM-100MM type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1Rowcm100mmLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-100MM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.2Columncm100mmLedSlotIndexnot-accessiblecurrentThe Slot number the CM-100MM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.3Columncm100mmLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.4Columncm100mmLedLK1read-onlycurrentThis object identifies the status of the link fiber port 1 (LK1) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - …
1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.5Columncm100mmLedLK2read-onlycurrentThis object identifies the status of the link fiber port 2 (LK2) LED on the media converter module. Possible status values are: off(0) - No fiber link on(1) - …
1.3.6.1.4.1.1966.21.1.1.1.1.4.8Nodecm10gFixed
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1Tablecm10gFixedTablenot-accessiblecurrentTable of CM-10G type media converter module's status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1Rowcm10gFixedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-10G type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.2Columncm10gSlotIndexnot-accessiblecurrentThe Slot number the CM-10G type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.3Columncm10gModelnameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.4Columncm10gModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.5Columncm10gHwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwi…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.6Columncm10gHwSw1OperationModeread-onlycurrentMedia converter module's current switch setting for operation mode. Data mode is for normal data transmission.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.7Columncm10gHwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode. If the Operation switch is set to Test, then this object indicates whether the port is in loopba…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.8Columncm10gHwSw3FiberFaultAlertread-onlycurrentMedia converter module's current switch setting for Fiber Fault Alert. If the Operation switch is set to Test, then this object indicates which port is in test…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.9Columncm10gHwSw4Port1EdcModeread-onlycurrentThis oject indicates the current switch setting for EDC auto mode for port 1. This object only applies to SFP moudles.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.10Columncm10gHwSw5Port2EdcModeread-onlycurrentThis oject indicates the current switch setting for EDC auto mode for port 2. This object only applies to SFP moudles.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.11Columncm10gPort1LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.12Columncm10gPort1ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.13Columncm10gPort1AutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.14Columncm10gPort1Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.15Columncm10gPort1Duplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.16Columncm10gPort1PauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.17Columncm10gPort1ReceiveStatusread-onlycurrentThis object identifies the status of whether light is being received on the fiber port (port 1)
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.18Columncm10gPort2LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.19Columncm10gPort2ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.20Columncm10gPort2AutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.21Columncm10gPort2Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.22Columncm10gPort2Duplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.23Columncm10gPort2PauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.24Columncm10gPort2ReceiveStatusread-onlycurrentThis object identifies the status of whether light is being received on the fiber port (port 2)
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.25Columncm10gPortLoopBackread-writecurrentMedia converter module's current port loopback mode setting. Writing to this object will change the current settings. This object is read-only if the media con…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.26Columncm10gPortTestModeread-onlycurrentMedia converter module's current port test mode setting.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2Tablecm10gConfigTablenot-accessiblecurrentTable of CM-10G type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1Rowcm10gConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-10G type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.2Columncm10gConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-10G type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.3Columncm10gConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.4Columncm10gConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.5Columncm10gConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.6Columncm10gConfigFiberFaultAlertread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.7Columncm10gConfigFiberAutoNegread-writecurrentThis object identifies the wither fiber auto-negotiation is enabled for both ports. This only applies if 1G SFP modules are in use. This object is read-only if…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.8Columncm10gConfigPort1Nameread-writecurrentThis object identifies a user definable name for port 1.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.9Columncm10gConfigPort1Enableread-writecurrentThis object identifies whether port 1 is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.10Columncm10gConfigPort1EdcModeread-writecurrentThis object identifies the EDC mode for this port. This config option only applies for an SFP module. This object is read-only if the media converter module's …
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.11Columncm10gConfigPort1FecEnableread-writecurrentThis object identifies the whether FEC control is enabled for this port. This config option only applies for an XFP module. This object is read-only if the med…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.12Columncm10gConfigPort1FecAmplituderead-writecurrentThis object identifies the FEC Amplitude value for this port. This config option only applies for an XFP module. This object is read-only if the media converte…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.13Columncm10gConfigPort1FecPhaseread-writecurrentThis object identifies the FEC phase value for this port. This config option only applies for an XFP module. This object is read-only if the media converter mo…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.14Columncm10gConfigPort1WavelengthEnableread-writecurrentThis object identifies whether Wavelength fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hard…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.15Columncm10gConfigPort1WavelengthValueread-writecurrentThis object identifies Wavelength fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwar…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.16Columncm10gConfigPort1ChannelEnableread-writecurrentThis object identifies whether channel number fine tuning is enabled for this port. This config option only applies for an XFP module. This object is read-only…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.17Columncm10gConfigPort1ChannelNumberread-writecurrentThis object identifies the channel number fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.18Columncm10gConfigPort1TxDitherEnableread-writecurrentThis object identifies the whether TX Dither control is enabled on this port. If not enabled the default TX Dither value will be used. This object is read-only…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.19Columncm10gConfigPort1TxDitherValueread-writecurrentThis object identifies the whether TX Dither is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitc…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.20Columncm10gConfigPort2Nameread-writecurrentThis object identifies a user definable name for port 2.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.21Columncm10gConfigPort2Enableread-writecurrentThis object identifies whether port 2 is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.22Columncm10gConfigPort2EdcModeread-writecurrentThis object identifies the EDC mode for this port. This config option only applies for an SFP module. This object is read-only if the media converter module's …
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.23Columncm10gConfigPort2FecEnableread-writecurrentThis object identifies the whether FEC control is enabled for this port. This config option only applies for an XFP module. This object is read-only if the med…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.24Columncm10gConfigPort2FecAmplituderead-writecurrentThis object identifies the FEC Amplitude value for this port. This config option only applies for an XFP module. This object is read-only if the media converte…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.25Columncm10gConfigPort2FecPhaseread-writecurrentThis object identifies the FEC phase value for this port. This config option only applies for an XFP module. This object is read-only if the media converter mo…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.26Columncm10gConfigPort2WavelengthEnableread-writecurrentThis object identifies whether Wavelength fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hard…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.27Columncm10gConfigPort2WavelengthValueread-writecurrentThis object identifies Wavelength fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwar…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.28Columncm10gConfigPort2ChannelEnableread-writecurrentThis object identifies whether channel number fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to …
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.29Columncm10gConfigPort2ChannelNumberread-writecurrentThis object identifies the channel number fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.30Columncm10gConfigPort2TxDitherEnableread-writecurrentThis object identifies the whether TX Dither control is enabled on this port. If not enabled the default TX Dither value will be used. This object is read-only…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.31Columncm10gConfigPort2TxDitherValueread-writecurrentThis object identifies the whether TX Dither is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitc…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3Tablecm10gLedTablenot-accessiblecurrentTable of CM-10G type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1Rowcm10gLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-10G type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.2Columncm10gLedsSlotIndexnot-accessiblecurrentThe Slot number the CM-10G type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.3Columncm10gLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.4Columncm10gLedLK1read-onlycurrentThis object identifies the status of the port 1 link (LK1) LED on the media converter module. Possible status values are: off(0) - No link on(1) - Port link pr…
1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.5Columncm10gLedLK2read-onlycurrentThis object identifies the status of the port 2 link (LK2) LED on the media converter module. Possible status values are: off(0) - No link on(1) - Port link pr…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9NodeexCM
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1TableexCMTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1RowexCMEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.2ColumnexCMSlotIndexnot-accessiblecurrentThe Slot number the CM-1110 type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.3ColumnexCMModelNameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.4ColumnexCMModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.5ColumnexCMHwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware switch on the media converter module. When this object is set to hardwareSwitch…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.6ColumnexCMHwSw1AutoLocalRemoteread-onlycurrentMedia converter module's current switch setting for VDSL role.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.7ColumnexCMHwSw2Rateread-onlycurrentMedia converter module's current switch setting for VDSL rate/reach.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.8ColumnexCMHwSw3SymmetricAsymmetricread-onlycurrentMedia converter module's current switch setting for VDSL band plan.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.9ColumnexCMHwSw4SnrRatioread-onlycurrentMedia converter module's current switch setting for VDSL signal-to-noise ratio.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.10ColumnexCMHwSw5Loopbackread-onlycurrentMedia converter module's current switch setting for VDSL loopback.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.11ColumnexCMHwSw6EthAutoNegread-onlycurrentMedia converter module's current switch setting for ethernet auto-negotiation.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.12ColumnexCMHwSw7EthSpeedread-onlycurrentMedia converter module's current switch setting for ethernet speed (when auto-negotiation is disabled).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.13ColumnexCMHwSw8EthDuplexread-onlycurrentMedia converter module's current switch setting for ethernet duplex (when auto-negotiation is disabled).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.14ColumnexCMHwSw9LinkModeread-onlycurrentMedia converter module's current switch setting for link mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.15ColumnexCMHwSw10InterlinkFaultFeedbackread-onlycurrentMedia converter module's current switch setting for interlink fault feedback.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.16ColumnexCMVdslLinkStatusread-onlycurrentMedia converter module's current VDSL link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.17ColumnexCMVdslConnTyperead-onlycurrentMedia converter module's VDSL port connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.18ColumnexCMVdslLoopBackread-writecurrentThis object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.19ColumnexCMVdslRoleread-onlycurrentThis object identifies the VDSL port's current role.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.20ColumnexCMVdslProfileread-onlycurrentThis object identifies the VDSL port's current profile. This value has no meaning when the VDSL role is remote.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.21ColumnexCMVdslBitswappingread-onlycurrentThis object identifies the VDSL port's current bitswapping status. This value has no meaning when the VDSL role is remote.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.22ColumnexCMVdslStatusAttainableDataRateUpread-onlycurrentThis object identifies the VDSL port's attainable data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.23ColumnexCMVdslStatusAttainableDataRateDownread-onlycurrentThis object identifies the VDSL port's attainable data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.24ColumnexCMVdslStatusActualDataRateUpread-onlycurrentThis object identifies the VDSL port's actual data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.25ColumnexCMVdslStatusActualDataRateDownread-onlycurrentThis object identifies the VDSL port's actual data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.26ColumnexCMVdslStatusPrevDataRateUpread-onlycurrentThis object identifies the VDSL port's previous data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.27ColumnexCMVdslStatusPrevDataRateDownread-onlycurrentThis object identifies the VDSL port's previous data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.28ColumnexCMVdslStatusActualSnrUpread-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (upstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.29ColumnexCMVdslStatusActualSnrDownread-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (downstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.30ColumnexCMVdslStatusActualSnrUs0read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (upstream 0) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.31ColumnexCMVdslStatusActualSnrUs1read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (upstream 1) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.32ColumnexCMVdslStatusActualSnrDs1read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (downstream 1) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.33ColumnexCMVdslStatusActualSnrUs2read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (upstream 2) in 0.2 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.34ColumnexCMVdslStatusActualSnrDs2read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (downstream 2) in 0.2 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.35ColumnexCMVdslStatusActualSnrUs3read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (upstream 3) in 0.3 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.36ColumnexCMVdslStatusActualSnrDs3read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (downstream 3) in 0.3 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.37ColumnexCMVdslStatusActualSnrUs4read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (upstream 4) in 0.4 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.38ColumnexCMVdslStatusActualSnrDs4read-onlycurrentThis object identifies the VDSL port's actual signal-to-noise ratio (downstream 4) in 0.4 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.39ColumnexCMVdslStatusActualSignalAttenuationUpread-onlycurrentThis object identifies the VDSL port's actual signal attenuation (upstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.40ColumnexCMVdslStatusActualSignalAttenuationDownread-onlycurrentThis object identifies the VDSL port's actual signal attenuation (downstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.41ColumnexCMVdslStatusActualSignalAttenuationUs0read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (upstream 0) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.42ColumnexCMVdslStatusActualSignalAttenuationUs1read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (upstream 1) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.43ColumnexCMVdslStatusActualSignalAttenuationDs1read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (downstream 1) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.44ColumnexCMVdslStatusActualSignalAttenuationUs2read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (upstream 2) in 0.2 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.45ColumnexCMVdslStatusActualSignalAttenuationDs2read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (downstream 2) in 0.2 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.46ColumnexCMVdslStatusActualSignalAttenuationUs3read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (upstream 3) in 0.3 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.47ColumnexCMVdslStatusActualSignalAttenuationDs3read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (downstream 3) in 0.3 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.48ColumnexCMVdslStatusActualSignalAttenuationUs4read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (upstream 4) in 0.4 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.49ColumnexCMVdslStatusActualSignalAttenuationDs4read-onlycurrentThis object identifies the VDSL port's actual signal attenuation (downstream 4) in 0.4 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.50ColumnexCMVdslStatusActualLineAttenuationUpread-onlycurrentThis object identifies the VDSL port's actual line attenuation (upstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.51ColumnexCMVdslStatusActualLineAttenuationDownread-onlycurrentThis object identifies the VDSL port's actual line attenuation (downstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.52ColumnexCMVdslStatusActualLineAttenuationUs0read-onlycurrentThis object identifies the VDSL port's actual line attenuation (upstream 0) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.53ColumnexCMVdslStatusActualLineAttenuationUs1read-onlycurrentThis object identifies the VDSL port's actual line attenuation (upstream 1) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.54ColumnexCMVdslStatusActualLineAttenuationDs1read-onlycurrentThis object identifies the VDSL port's actual line attenuation (downstream 1) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.55ColumnexCMVdslStatusActualLineAttenuationUs2read-onlycurrentThis object identifies the VDSL port's actual line attenuation (upstream 2) in 0.2 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.56ColumnexCMVdslStatusActualLineAttenuationDs2read-onlycurrentThis object identifies the VDSL port's actual line attenuation (downstream 2) in 0.2 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.57ColumnexCMVdslStatusActualLineAttenuationUs3read-onlycurrentThis object identifies the VDSL port's actual line attenuation (upstream 3) in 0.3 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.58ColumnexCMVdslStatusActualLineAttenuationDs3read-onlycurrentThis object identifies the VDSL port's actual line attenuation (downstream 3) in 0.3 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.59ColumnexCMVdslStatusActualLineAttenuationUs4read-onlycurrentThis object identifies the VDSL port's actual line attenuation (upstream 4) in 0.4 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.60ColumnexCMVdslStatusActualLineAttenuationDs4read-onlycurrentThis object identifies the VDSL port's actual line attenuation (downstream 4) in 0.4 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.61ColumnexCMVdslStatusActualInterleaveDelayUpread-onlycurrentThis object identifies the VDSL port's actual interleave delay (upstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.62ColumnexCMVdslStatusActualInterleaveDelayDownread-onlycurrentThis object identifies the VDSL port's actual interleave delay (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.63ColumnexCMVdslStatusActualInpUpread-onlycurrentThis object identifies the VDSL port's actual INP (impulse noise protection) (upstream).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.64ColumnexCMVdslStatusActualInpDownread-onlycurrentThis object identifies the VDSL port's actual INP (impulse noise protection) (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.65ColumnexCMVdslStatusActualInterleavingDepthUpread-onlycurrentThis object identifies the VDSL port's actual interleaving depth (upstream).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.66ColumnexCMVdslStatusActualInterleavingDepthDownread-onlycurrentThis object identifies the VDSL port's actual interleaving depth (impulse noise protection) (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.67ColumnexCMVdslStatusActualInterleavingBlockUpread-onlycurrentThis object identifies the VDSL port's actual interleaving block (upstream).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.68ColumnexCMVdslStatusActualInterleavingBlockDownread-onlycurrentThis object identifies the VDSL port's actual interleaving block (impulse noise protection) (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.69ColumnexCMVdslStatusActualTransmitPowerUpread-onlycurrentThis object identifies the VDSL port's actual transmit power (upstream) in 0.1 dBm.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.70ColumnexCMVdslStatusActualTransmitPowerDownread-onlycurrentThis object identifies the VDSL port's actual transmit power (downstream) in 0.1 dBm.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.71ColumnexCMVdslStatusMaxDataRateUpread-onlycurrentThis object identifies the VDSL port's maximum data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.72ColumnexCMVdslStatusMaxDataRateDownread-onlycurrentThis object identifies the VDSL port's maximum data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.73ColumnexCMVdslStatusMinDataRateUpread-onlycurrentThis object identifies the VDSL port's minimum data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.74ColumnexCMVdslStatusMinDataRateDownread-onlycurrentThis object identifies the VDSL port's minimum data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.75ColumnexCMVdslStatusTargetSnrUpread-onlycurrentThis object identifies the VDSL port's target signal-to-noise ratio (upstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.76ColumnexCMVdslStatusTargetSnrDownread-onlycurrentThis object identifies the VDSL port's target signal-to-noise ratio (downstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.77ColumnexCMVdslStatusMaxInterleaveDelayUpread-onlycurrentThis object identifies the VDSL port's maximum interleave delay (upstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.78ColumnexCMVdslStatusMaxInterleaveDelayDownread-onlycurrentThis object identifies the VDSL port's maximum interleave delay (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.79ColumnexCMVdslStatusMinInpUpread-onlycurrentThis object identifies the VDSL port's minimum INP (impulse noise protection) (upstream).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.80ColumnexCMVdslStatusMinInpDownread-onlycurrentThis object identifies the VDSL port's minimum INP (impulse noise protection) (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.81ColumnexCMVdslRemoteLoopbackread-writecurrentWrite remoteLoopbackOff(1) or remoteLoopbackOn(2) to this object to set the loopback state of the remote VDSL peer. This object's value represents the last loo…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.82ColumnexCMVdslRemoteResetread-writecurrentWrite resetRemotePeer(1) to this object to reset the remote VDSL peer. This object's value has no meaning
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.83ColumnexCMEthernetLinkStatusread-onlycurrentMedia converter module's current Ethernet link status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.84ColumnexCMEthernetConnTyperead-onlycurrentMedia converter module's Ethernet connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.85ColumnexCMEthernetAutoNegStateread-onlycurrentMedia converter module's current Ethernet auto-negotiation state.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.86ColumnexCMEthernetSpeedread-onlycurrentIf Ethernet auto-negotiation state is complete then this object indicates the media converter module's current Ethernet auto-negotiated speed setting. If auto-…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.87ColumnexCMEthernetDuplexread-onlycurrentIf Ethernet auto-negotiation state is complete then this object indicates the media converter module's current Ethernet auto-negotiated duplex setting. If auto…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.88ColumnexCMEthernetCrossOverread-onlycurrentIf Ethernet auto-negotiation state is complete then this object indicates the media converter module's current Ethernet auto-negotiated MDI/MDI-X setting. If a…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.89ColumnexCMEthernetPauseEnhread-onlycurrentIf Ethernet auto-negotiation state is complete then this object indicates the media converter module's current Ethernet auto-negotiated pause setting. If auto-…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.90ColumnexCMEthernetLPRFStatusread-onlycurrentMedia converter module's Ethernet Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.91ColumnexCMEthernetAutoSpeedDownshiftread-onlycurrentThis object identifies the status of the Ethernet auto speed downshift feature. noDownshift indicates that an automatic downshift of the Ethernet speed has not…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.92ColumnexCMEthernetMDIread-onlycurrentThis object identifies the Ethernet port's crossover status: MDI or MDI-X.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.93ColumnexCMVdslFirmwareVersionread-onlycurrentThis object identifies the version of the VDSL firmware.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.94ColumnexCMVdslFirmwareDateread-onlycurrentThis object identifies the date of the VDSL firmware
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.95ColumnexCMVdslFirmwareDateStringread-onlycurrentThis object identifies the version of the VDSL firmware, in human-readable format.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2TableexCMConfigTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1RowexCMConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.2ColumnexCMConfigSlotIndexnot-accessiblecurrentThe Slot number the ex-CM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.3ColumnexCMConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.4ColumnexCMConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.5ColumnexCMConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.6ColumnexCMConfigInterlinkFaultFeedbackread-writecurrentThis object identifies the interlink fault feedback setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.7ColumnexCMConfigVdslPortNameread-writecurrentThis object identifies a user definable name for the VDSL port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.8ColumnexCMConfigVdslPortEnableread-writecurrentThis object identifies whether the VDSL port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.9ColumnexCMConfigVdslProfileModeread-writecurrentThis object specifies how the VDSL profile is selected. Auto: select through exCMConfigVdslRate and exCMConfigVdslSymmetry Manual: select through exCMConfigVds…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.10ColumnexCMConfigVdslRoleread-writecurrentThis object specifies the VDSL role: auto, local (CO), or remote (CPE).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.11ColumnexCMConfigVdslRateread-writecurrentThis object specifies the VDSL rate/reach.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.12ColumnexCMConfigVdslSymmetryread-writecurrentThis object specifies the VDSL band plan or symmetry.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.13ColumnexCMConfigVdslProfileread-writecurrentThis object specifies the VDSL profile.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.14ColumnexCMConfigVdslOverrideProfileread-writecurrentThis object specifies whether to override advanced VDSL profile settings (e.g exCMConfigVdslSignalToNoiseRatioUp).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.15ColumnexCMConfigVdslSignalToNoiseRatioUpread-writecurrentThis object represents the advanced VDSL profile setting signal-to-noise ratio (upstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.16ColumnexCMConfigVdslMinDataRateUpread-writecurrentThis object represents the advanced VDSL profile setting minimum data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.17ColumnexCMConfigVdslMaxDataRateUpread-writecurrentThis object represents the advanced VDSL profile setting maximum data rate (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.18ColumnexCMConfigVdslMaxInterleaveDelayUpread-writecurrentThis object represents the advanced VDSL profile setting maximum delay (upstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.19ColumnexCMConfigVdslMinInpUpread-writecurrentThis object represents the advanced VDSL profile setting minimum INP (impulse noise protection) (upstream).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.20ColumnexCMConfigVdslSignalToNoiseRatioDownread-writecurrentThis object represents the advanced VDSL profile setting signal-to-noise ratio (downstream) in 0.1 dB.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.21ColumnexCMConfigVdslMinDataRateDownread-writecurrentThis object represents the advanced VDSL profile setting minimum data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.22ColumnexCMConfigVdslMaxDataRateDownread-writecurrentThis object represents the advanced VDSL profile setting maximum data rate (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.23ColumnexCMConfigVdslMaxInterleaveDelayDownread-writecurrentThis object represents the advanced VDSL profile setting maximum delay (downstream) in ms.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.24ColumnexCMConfigVdslMinInpDownread-writecurrentThis object represents the advanced VDSL profile setting minimum INP (impulse noise protection) (downstream).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.25ColumnexCMConfigVdslBitswappingread-writecurrentThis object represents the advanced VDSL profile setting bitswapping.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.26ColumnexCMConfigVdslLowBandwidthAlarmUpread-writecurrentThis object represents the VDSL low bandwidth alarm threshold (upstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.27ColumnexCMConfigVdslLowBandwidthAlarmDownread-writecurrentThis object represents the VDSL low bandwidth alarm threshold (downstream) in kbps.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.28ColumnexCMConfigEthernetPortNameread-writecurrentThis object identifies a user definable name for the ethernet port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.29ColumnexCMConfigEthernetPortEnableread-writecurrentThis object identifies whether the VDSL port is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.30ColumnexCMConfigEthernetAutoNegotiationread-writecurrentThis object identifies the whether ethernet auto-negotiation is enabled. This object is read-only if the media converter module's ConfigMode jumper is set to h…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.31ColumnexCMConfigEthernetAutoNegAdv10HDXread-writecurrentThis object controls whether or the ethernet port advertises willingness to connect at 10Mbps, half duplex. This setting is ignored when auto-negotiation is di…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.32ColumnexCMConfigEthernetAutoNegAdv10FDXread-writecurrentThis object controls whether or the ethernet port advertises willingness to connect at 10Mbps, full duplex. This setting is ignored when auto-negotiation is di…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.33ColumnexCMConfigEthernetAutoNegAdv100HDXread-writecurrentThis object controls whether or the ethernet port advertises willingness to connect at 100Mbps, half duplex. This setting is ignored when auto-negotiation is d…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.34ColumnexCMConfigEthernetAutoNegAdv100FDXread-writecurrentThis object controls whether or the ethernet port advertises willingness to connect at 100Mbps, full duplex. This setting is ignored when auto-negotiation is d…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.35ColumnexCMConfigEthernetAutoNegAdv1000FDXread-writecurrentThis object controls whether or the ethernet port advertises willingness to connect at 1000Mbps, full duplex. This setting is ignored when auto-negotiation is …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.36ColumnexCMConfigEthernetSpeedread-writecurrentIf ethernet auto-negotiation is disabled then this object identifies the configured cooper speed. 1000 Mbps speed can only be auto negotiated. If ethernet auto…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.37ColumnexCMConfigEthernetDuplexread-writecurrentIf ethernet auto-negotiation is disabled then this object identifies the duplex setting for 10 & 100 Mbps for the ethernet port. Duplex for 1000 Mbps has to be…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.38ColumnexCMConfigEthernetCrossOverread-writecurrentThis object identifies the ethernet MDI/MDI-X setting.This object is read-only if the media converter module's ConfigMode jumper is set to
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.39ColumnexCMConfigEthernetPauseEnhread-writecurrentThis object identifies the ethernet pause (flow control) setting that is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetri…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.40ColumnexCMConfigEthernetAutoSpeedDownshiftread-writecurrentThis object identifies the number of times the PHY attempts to establish a Gigabit link before the PHY downshift to the next highest speed. A value of 0 indica…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.41ColumnexCMConfigEthernet10BaseTDistanceread-writecurrentWhen using cable exceeding 100 meters in 10BASE-T mode this feature should be set to extended(1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.42ColumnexCMConfigUnidirectionalEthernetread-writecurrentRestrict the flow of Ethernet traffic to a single direction. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.43ColumnexCMConfigPriorityToEgressQueueMap0read-writecurrentSet the egress queue of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.44ColumnexCMConfigPriorityToEgressQueueMap1read-writecurrentSet the egress queue of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.45ColumnexCMConfigPriorityToEgressQueueMap2read-writecurrentSet the egress queue of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.46ColumnexCMConfigPriorityToEgressQueueMap3read-writecurrentSet the egress queue of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.47ColumnexCMConfigPriorityToEgressQueueMap4read-writecurrentSet the egress queue of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.48ColumnexCMConfigPriorityToEgressQueueMap5read-writecurrentSet the egress queue of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.49ColumnexCMConfigPriorityToEgressQueueMap6read-writecurrentSet the egress queue of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.50ColumnexCMConfigPriorityToEgressQueueMap7read-writecurrentSet the egress queue of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.51ColumnexCMConfigEthernet8021pPriorityread-writecurrentUse 802.1p tag priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.52ColumnexCMConfigEthernetIpTosPriorityread-writecurrentUse IP TOS priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.53ColumnexCMConfigEthernetPriorityPrecedenceread-writecurrentConfigure priority precedence. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.54ColumnexCMConfigEthernetCongestionPolicyread-writecurrentConfigure priority congestion policy. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.55ColumnexCMConfigEthernetPriorityMap0read-writecurrentChange the priority of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.56ColumnexCMConfigEthernetPriorityMap1read-writecurrentChange the priority of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.57ColumnexCMConfigEthernetPriorityMap2read-writecurrentChange the priority of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.58ColumnexCMConfigEthernetPriorityMap3read-writecurrentChange the priority of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.59ColumnexCMConfigEthernetPriorityMap4read-writecurrentChange the priority of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.60ColumnexCMConfigEthernetPriorityMap5read-writecurrentChange the priority of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.61ColumnexCMConfigEthernetPriorityMap6read-writecurrentChange the priority of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.62ColumnexCMConfigEthernetPriorityMap7read-writecurrentChange the priority of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.63ColumnexCMConfigEthernetIngressLimitread-writecurrentSet a limit on the rate of incoming packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.64ColumnexCMConfigEthernetEgressLimitread-writecurrentSet a limit on the rate of outgoing packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.65ColumnexCMConfigEthernetDiscardTaggedFramesread-writecurrentEnable discarding of tagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.66ColumnexCMConfigEthernetDiscardUntaggedFramesread-writecurrentEnable discarding of untagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.67ColumnexCMConfigEthernetDefaultVlanIdread-writecurrentSet the default VLAN ID to insert when tagging frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.68ColumnexCMConfigEthernetDefaultPriorityread-writecurrentSet the default frame priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.69ColumnexCMConfigEthernetVlanTaggingActionread-writecurrentSet the default tagging action. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.70ColumnexCMConfigEthernetFilterUnknownMulticastread-writecurrentEnable filtering of multicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.71ColumnexCMConfigEthernetFilterUnknownUnicastread-writecurrentEnable filtering of unicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.72ColumnexCMConfigVdsl8021pPriorityread-writecurrentUse 802.1p tag priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.73ColumnexCMConfigVdslIpTosPriorityread-writecurrentUse IP TOS priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.74ColumnexCMConfigVdslPriorityPrecedenceread-writecurrentConfigure priority precedence. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.75ColumnexCMConfigVdslCongestionPolicyread-writecurrentConfigure priority congestion policy. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.76ColumnexCMConfigVdslPriorityMap0read-writecurrentChange the priority of frames tagged with 802.1p priority 0. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.77ColumnexCMConfigVdslPriorityMap1read-writecurrentChange the priority of frames tagged with 802.1p priority 1. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.78ColumnexCMConfigVdslPriorityMap2read-writecurrentChange the priority of frames tagged with 802.1p priority 2. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.79ColumnexCMConfigVdslPriorityMap3read-writecurrentChange the priority of frames tagged with 802.1p priority 3. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.80ColumnexCMConfigVdslPriorityMap4read-writecurrentChange the priority of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.81ColumnexCMConfigVdslPriorityMap5read-writecurrentChange the priority of frames tagged with 802.1p priority 5. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.82ColumnexCMConfigVdslPriorityMap6read-writecurrentChange the priority of frames tagged with 802.1p priority 6. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.83ColumnexCMConfigVdslPriorityMap7read-writecurrentChange the priority of frames tagged with 802.1p priority 7. A value of -1 signifies that this feature is not supported by the current media converter module f…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.84ColumnexCMConfigVdslIngressLimitread-writecurrentSet a limit on the rate of incoming packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.85ColumnexCMConfigVdslEgressLimitread-writecurrentSet a limit on the rate of outgoing packets. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.86ColumnexCMConfigVdslDiscardTaggedFramesread-writecurrentEnable discarding of tagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.87ColumnexCMConfigVdslDiscardUntaggedFramesread-writecurrentEnable discarding of untagged frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.88ColumnexCMConfigVdslDefaultVlanIdread-writecurrentSet the default VLAN ID to insert when tagging frames. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.89ColumnexCMConfigVdslDefaultPriorityread-writecurrentSet the default frame priority. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.90ColumnexCMConfigVdslVlanTaggingActionread-writecurrentSet the default tagging action. (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.91ColumnexCMConfigVdslFilterUnknownMulticastread-writecurrentEnable filtering of multicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.92ColumnexCMConfigVdslFilterUnknownUnicastread-writecurrentEnable filtering of unicast frames with an unknown destination (This feature may require a media converter module firmware upgrade).
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.93ColumnexCMConfigVdslFastModeread-writecurrentThis object represents the VDSL fast mode setting.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3TableexCMLedTablenot-accessiblecurrentTable of CM-1110 type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1RowexCMLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.2ColumnexCMLedSlotIndexnot-accessiblecurrentThe Slot number of the module
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.3ColumnexCMLedILNKread-onlycurrentThis object identifies the status of the ILNK (InterLink) LED on the media converter module. Possible status values are: slowBlinkingGreen(1) - ILNK port is id…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.4ColumnexCMLedLOCread-onlycurrentThis object identifies the status of the Local (LOC) LED on the media converter module. When this LED is green, it indicates that the InterLink port's VDSL rol…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.5ColumnexCMLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.6ColumnexCMLedETHread-onlycurrentThis object identifies the status of the ETH (Ethernet) LED on the media converter module. Possible status values are: off(0) - ETH port is down slowBlinkingGr…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.7ColumnexCMLedRMTread-onlycurrentThis object identifies the status of the Remote (RMT) LED on the media converter module. When this LED is green, it indicates that the InterLink port's VDSL ro…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4TableexCMStatsTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1RowexCMStatsEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.2ColumnexCMStatsSlotIndexnot-accessiblecurrentThe Slot number the ex-1CM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.3ColumnexCMMediaPortIndexnot-accessiblecurrentMedia converter module port index indicating which media port the statistical counters are associated with.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.4ColumnexCMPortInDiscardsread-onlycurrentA counter that counts the number of good, non-filtered frames that normally would have been forwarded, but could not due to lack of buffer space.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.5ColumnexCMPortInFilteredread-onlycurrentA counter that counts the number of good frames that were filtered due to ingress switch policy rules.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.6ColumnexCMPortInGoodOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all good Ethernet frames received on the media port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.7ColumnexCMPortHCInGoodOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all good Ethernet frames received on the media port. This object is a 64-bit version of exCMPortInGoodOctets.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.8ColumnexCMPortInBadOctetsread-onlycurrentAn ingress counter that is the sum of lengths of all bad Ethernet frames received on the media port..
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.9ColumnexCMPortInUnicastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Unicast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.10ColumnexCMPortInBroadcastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Broadcast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.11ColumnexCMPortInMulticastsread-onlycurrentAn ingress counter that counts the number of good frames received that have a Multicast destination MAC address. This count does not include frames counted in …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.12ColumnexCMPortInPausesread-onlycurrentAn ingress counter that counts the number of good frames reachieved that have a Pause destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.13ColumnexCMPortInUnderSizesread-onlycurrentAn ingress counter that counts the number of frames received with a length less that 64 octets but with a valid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.14ColumnexCMPortInFragmentsread-onlycurrentAn ingress counter that counts the number of frames received with a length less that 64 octets and an invalid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.15ColumnexCMPortInOversizesread-onlycurrentAn ingress counter that counts the number of frames received with a length more than the maximum packet size but with a valid FCS. The maximum packet size can …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.16ColumnexCMPortInJabbersread-onlycurrentAn ingress counter that counts the number of frames received with a length more than the maximum packet size but with a invalid FCS. The maximum packet size ca…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.17ColumnexCMPortInRxErrsread-onlycurrentAn ingress counter that counts the number of frames received with an RxErr signal from the PHY.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.18ColumnexCMPortInFcsErrsread-onlycurrentAn ingress counter that counts the number of frames received with a CRC error not counted in the exCMPortInFragments, exCMPortInFcsErr, or the exCMPortInRxErr …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.19ColumnexCMPortPkts64Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of exactly 64 Octets, including those with errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.20ColumnexCMPortPkts65to127Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 65 and 127 Octets inclusive, including those with errors.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.21ColumnexCMPortPkts128to255Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 128 and 255 Octets inclusive, including those with error…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.22ColumnexCMPortPkts256to511Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 256 and 511 Octets inclusive, including those with error…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.23ColumnexCMPortPkts512to1023Octetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 512 and 1023 Octets inclusive, including those with erro…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.24ColumnexCMPortPkts1024toMaxOctetsread-onlycurrentA Histogram counter that counts the number of frames received and transmitted with a length of between 1024 and maximum packet size octets inclusive, including…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.25ColumnexCMPortOutOctetsread-onlycurrentAn Egress counter that is the sum of lengths of all good Ethernet frames sent on the media port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.26ColumnexCMPortHCOutOctetsread-onlycurrentAn Egress counter that is the sum of lengths of all good Ethernet frames sent on the media port. This object is a 64-bit version of exCMPortOutOctets.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.27ColumnexCMPortOutFilteredread-onlycurrentA counter that counts the number of good frames that were filtered due to egress switch policy rules.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.28ColumnexCMPortOutUnicastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Unicast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.29ColumnexCMPortOutBroadcastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Broadcast destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.30ColumnexCMPortOutMulticastsread-onlycurrentAn Egress counter that counts the number of good frames sent that have a Multicast destination MAC address. This count does not include frames counted in the e…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.31ColumnexCMPortOutPausesread-onlycurrentAn Egress counter that counts the number of good frames reachieved that have a Pause destination MAC address.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.32ColumnexCMPortDeferredsread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced no collisions but are delayed because the medium was busy during t…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.33ColumnexCMPortCollisionsread-onlycurrentAn Egress counter that counts the number of collision events seen by the MAC not including those counted in exCMPortSingles, exCMPortMultiple , exCMPortExcessi…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.34ColumnexCMPortSinglesread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced exactly one collision. This counter is applicable in half-duplex o…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.35ColumnexCMPortMultiplesread-onlycurrentAn Egress counter that counts the number of successfully transmitted frames that experienced more than one collision. This counter is aplicable in half-duplex …
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.36ColumnexCMPortExcessivesread-onlycurrentAn Egress counter that counts the number frames dropped in the transmit MAC because the frame experienced 16 consecutive collisions. This counter is applicable…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.37ColumnexCMPortLatesread-onlycurrentAn Egress counter that counts the number times a collision is detected later than 512 bits-times into the transmission of a frame. This counter is applicable i…
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.38ColumnexCMPortOutFcsErrsread-onlycurrentAn Egress counter that counts the number frames transmitted with an invalid FCS.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.39ColumnexCMPortResetCountersread-writecurrentAllows the resetting of all exCMStats statistical counters for this port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5TableexCMVdslStatsTablenot-accessiblecurrentTable of CM-1110 type media converter module's configuration and status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1RowexCMVdslStatsEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-1110 type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.2ColumnexCMVdslStatsSlotIndexnot-accessiblecurrentThe Slot number the ex-1CM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.3ColumnexCMVdslStatsMediaPortIndexnot-accessiblecurrentMedia converter module port index indicating which media port the statistical counters are associated with.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.4ColumnexCMVdslStatsTimePeriodread-onlycurrentMedia converter module port index indicating which media port the statistical counters are associated with.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.5ColumnexCMVdslStatsFullInitLocalread-onlycurrentThe VDSL port's fully initialized (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.6ColumnexCMVdslStatsCodeViolationLocalread-onlycurrentThe VDSL port's code violation (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.7ColumnexCMVdslStatsCorrectedLocalread-onlycurrentThe VDSL port's corrected (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.8ColumnexCMVdslStatsFecSecsLocalread-onlycurrentThe VDSL port's forward error correction seconds (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.9ColumnexCMVdslStatsErroredSecsLocalread-onlycurrentThe VDSL port's errored seconds (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.10ColumnexCMVdslStatsSeverelyErroredSecsLocalread-onlycurrentThe VDSL port's severely errored seconds (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.11ColumnexCMVdslStatsLossOfSignalSecsLocalread-onlycurrentThe VDSL port's loss of signal seconds (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.12ColumnexCMVdslStatsUnavailableSecsLocalread-onlycurrentThe VDSL port's unavailable seconds (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.13ColumnexCMVdslStatsTimeElapsedLocalread-onlycurrentThe VDSL port's elapsed time in seconds (local) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.14ColumnexCMVdslStatsFullInitRemoteread-onlycurrentThe VDSL port's fully initialized (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.15ColumnexCMVdslStatsCodeViolationRemoteread-onlycurrentThe VDSL port's code violation (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.16ColumnexCMVdslStatsCorrectedRemoteread-onlycurrentThe VDSL port's corrected (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.17ColumnexCMVdslStatsFecSecsRemoteread-onlycurrentThe VDSL port's forward error correction seconds (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.18ColumnexCMVdslStatsErroredSecsRemoteread-onlycurrentThe VDSL port's errored seconds (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.19ColumnexCMVdslStatsSeverelyErroredSecsRemoteread-onlycurrentThe VDSL port's severely errored seconds (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.20ColumnexCMVdslStatsLossOfSignalSecsRemoteread-onlycurrentThe VDSL port's loss of signal seconds (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.21ColumnexCMVdslStatsUnavailableSecsRemoteread-onlycurrentThe VDSL port's unavailable seconds (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.22ColumnexCMVdslStatsTimeElapsedRemoteread-onlycurrentThe VDSL port's elapsed time in seconds (remote) count.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6TableexCMAvctTablenot-accessiblecurrentTable of ex-CM media converter modules.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1RowexCMAvctEntrynot-accessiblecurrentEntries of the table, each relating to a copper Ethernet port on the eX-CM type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.2ColumnexCMAvctSlotIndexnot-accessiblecurrentThe Slot number the eX-CM type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.3ColumnexCMAvctStartread-writecurrentSet this self-clearing variable to yes initiate the Advanced Virtual Cable Test. Note: During the test, no network data will be passed.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.4ColumnexCMAvctStatusread-onlycurrentThis object identifies the state of the Advanced Virtual Cable Tester.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.5ColumnexCMAvctTxRxPair1Resultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx/Rx pair one.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.6ColumnexCMAvctTxRxPair1Amplituderead-onlycurrentAmplitude of Tx/Rx pair one in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.7ColumnexCMAvctTxRxPair1Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair one is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.8ColumnexCMAvctTxRxPair2Resultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx/Rx pair two.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.9ColumnexCMAvctTxRxPair2Amplituderead-onlycurrentAmplitude of Tx/Rx pair two in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.10ColumnexCMAvctTxRxPair2Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair two is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.11ColumnexCMAvctTxRxPair3Resultsread-onlycurrentTest result code returned from Virtual Cable Test of the Tx/Rx pair three.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.12ColumnexCMAvctTxRxPair3Amplituderead-onlycurrentAmplitude of Tx/Rx pair three in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.13ColumnexCMAvctTxRxPair3Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair three is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.14ColumnexCMAvctTxRxPair4Resultsread-onlycurrentTest result code returned from Virtual Cable Test of Tx/Rx pair four.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.15ColumnexCMAvctTxRxPair4Amplituderead-onlycurrentAmplitude of Tx/Rx pair four in millivolts when test result codes is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.16ColumnexCMAvctTxRxPair4Distanceread-onlycurrentDistance in meters to fault when test result codes for Tx/Rx pair four is short or open.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10Nodecm10gt
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1Tablecm10gtTablenot-accessiblecurrentTable of CM-10G type media converter module's status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1Rowcm10gtEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-10G type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.2Columncm10gtSlotIndexnot-accessiblecurrentThe Slot number the CM-10G type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.3Columncm10gtModelnameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.4Columncm10gtModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.5Columncm10gtHwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwi…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.6Columncm10gtHwSw1OperationModeread-onlycurrentMedia converter module's current switch setting for operation mode. Data mode is for normal data transmission.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.7Columncm10gtHwSw2LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode. If the Operation switch is set to Test, then this object indicates whether the port is in loopba…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.8Columncm10gtHwSw3FiberFaultAlertread-onlycurrentMedia converter module's current switch setting for Fiber Fault Alert. If the Operation switch is set to Test, then this object indicates which port is in test…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.9Columncm10gtHwSw4EnergyEfficentEthernetread-onlycurrentThis object indicates the current switch setting for Energy Efficient Ethernet on port 2.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.10Columncm10gtHwSw5Unusedread-onlycurrentThis object indicates the current switch setting for dip switch 5, which is unused.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.11Columncm10gtPort1LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.12Columncm10gtPort1ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.13Columncm10gtPort1AutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.14Columncm10gtPort1Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.15Columncm10gtPort1Duplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.16Columncm10gtPort1PauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.17Columncm10gtPort1ReceiveStatusread-onlycurrentThis object identifies the status of whether light is being received on the fiber port (port 1)
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.18Columncm10gtPort1LPRFStatusread-onlycurrentMedia converter module's Link Partner Remote Fault status (port 1). This object only applies to SFP modules running at 1G, with auto-negotiation enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.19Columncm10gtPort2LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.20Columncm10gtPort2ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.21Columncm10gtPort2AutoNegStateread-onlycurrentMedia converter module's current fiber auto-negotiation state (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.22Columncm10gtPort2Speedread-onlycurrentMedia converter module's fiber port speed in megabits per second (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.23Columncm10gtPort2Duplexread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negot…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.24Columncm10gtPort2PauseEnhread-onlycurrentIf fiber auto-negotiation state is complete then this object indicates the media converter module's current fiber auto-negotiated pause setting. If auto-negoti…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.25Columncm10gtPort2LPRFStatusread-onlycurrentMedia converter module's copper Link Partner Remote Fault status.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.26Columncm10gtPortLoopBackread-writecurrentMedia converter module's current port loopback mode setting. Writing to this object will change the current settings. This object is read-only if the media con…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.27Columncm10gtPortTestModeread-onlycurrentMedia converter module's current port test mode setting.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2Tablecm10gtConfigTablenot-accessiblecurrentTable of CM-10G type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1Rowcm10gtConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-10G type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.2Columncm10gtConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-10G type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.3Columncm10gtConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.4Columncm10gtConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.5Columncm10gtConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.6Columncm10gtConfigFiberFaultAlertread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.7Columncm10gtConfigFiberAutoNegread-writecurrentThis object identifies the wither fiber auto-negotiation is enabled for both ports. This only applies if 1G SFP modules are in use. This object is read-only if…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.8Columncm10gtConfigPort1Nameread-writecurrentThis object identifies a user definable name for port 1.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.9Columncm10gtConfigPort1Enableread-writecurrentThis object identifies whether port 1 is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.10Columncm10gtConfigPort1FecEnableread-writecurrentThis object identifies the whether FEC control is enabled for this port. This config option only applies for an XFP module. This object is read-only if the med…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.11Columncm10gtConfigPort1FecAmplituderead-writecurrentThis object identifies the FEC Amplitude value for this port. This config option only applies for an XFP module. This object is read-only if the media converte…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.12Columncm10gtConfigPort1FecPhaseread-writecurrentThis object identifies the FEC phase value for this port. This config option only applies for an XFP module. This object is read-only if the media converter mo…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.13Columncm10gtConfigPort1WavelengthEnableread-writecurrentThis object identifies whether Wavelength fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hard…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.14Columncm10gtConfigPort1WavelengthValueread-writecurrentThis object identifies Wavelength fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwar…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.15Columncm10gtConfigPort1ChannelEnableread-writecurrentThis object identifies whether channel number fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to …
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.16Columncm10gtConfigPort1ChannelNumberread-writecurrentThis object identifies the channel number fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.17Columncm10gtConfigPort1TxDitherEnableread-writecurrentThis object identifies the whether TX Dither control is enabled on this port. If not enabled the default TX Dither value will be used. This object is read-only…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.18Columncm10gtConfigPort1TxDitherValueread-writecurrentThis object identifies the whether TX Dither is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitc…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.19Columncm10gtConfigPort2Nameread-writecurrentThis object identifies a user definable name for port 2.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.20Columncm10gtConfigPort2Enableread-writecurrentThis object identifies whether port 2 is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.21Columncm10gtConfigPort2CopperDuplexread-writecurrentThis object identifies the duplex settings for the copper port.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.22Columncm10gtConfigPort2CopperPauseEnhread-writecurrentThis object identifies the copper pause (flow control) setting that is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrica…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.23Columncm10gtConfigPort2CopperEnergyEfficientEthernetread-writecurrentThis object identifies the copper Energy-Efficient Ethernet setting for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3Tablecm10gtLedTablenot-accessiblecurrentTable of CM-10G type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1Rowcm10gtLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-10G type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.2Columncm10gtLedsSlotIndexread-onlycurrentThe Slot number the CM-10G type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.3Columncm10gtLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.4Columncm10gtLedLK1read-onlycurrentThis object identifies the status of the port 1 link (LK1) LED on the media converter module. Possible status values are: off(0) - No link on(1) - Port link pr…
1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.5Columncm10gtLedLK2read-onlycurrentThis object identifies the status of the port 2 link (LK2) LED on the media converter module. Possible status values are: off(0) - No link on(1) - Port link pr…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11Nodecm4gpt
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1Tablecm4gptTablenot-accessiblecurrentTable of CM-4GPT type media converter module's status type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1Rowcm4gptEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-4GPT type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.2Columncm4gptSlotIndexnot-accessiblecurrentThe Slot number the CM-4GPT type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.3Columncm4gptModelnameread-onlycurrentThis object identifies the model of media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.4Columncm4gptModelDescread-onlycurrentThis object identifies a static description of the media converter module present in the chassis
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.5Columncm4gptHwJmp5ConfigModeread-onlycurrentThis object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwi…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.6Columncm4gptHwSw1LinkModeread-onlycurrentMedia converter module's current switch setting for Link Mode.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.7Columncm4gptHwSw2FiberFaultAlertread-onlycurrentMedia converter module's current switch setting for Fiber Fault Alert.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.8Columncm4gptHwSw3RateSelectread-onlycurrentMedia converter module's current switch setting for Rate Select.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.9Columncm4gptHwSw4Unusedread-onlycurrentThis object indicates the current switch setting for the 4th, unused switch.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.10Columncm4gptPort1LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.11Columncm4gptPort1ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 1).
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.12Columncm4gptPort2LinkStatusread-onlycurrentMedia converter module's current fiber link status (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.13Columncm4gptPort2ConnTyperead-onlycurrentMedia converter module's fiber port connector type (port 2).
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2Tablecm4gptConfigTablenot-accessiblecurrentTable of CM-4GPT type media converter module's configuration type information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1Rowcm4gptConfigEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-4GPT type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.2Columncm4gptConfigSlotIndexnot-accessiblecurrentThe Slot number the CM-4GPT type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.3Columncm4gptConfigStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.4Columncm4gptConfigModuleNameread-writecurrentThis object identifies a user configurable name for the media converter module present in the chassis.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.5Columncm4gptConfigLinkModeread-writecurrentThis object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardw…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.6Columncm4gptConfigFiberFaultAlertread-writecurrentThis object identifies the Fiber Fault Alert setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is set to…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.7Columncm4gptConfigRateSelectread-writecurrentThis object identifies the Rate Select setting for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is se…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.8Columncm4gptConfigPort1Nameread-writecurrentThis object identifies a user definable name for port 1.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.9Columncm4gptConfigPort1Enableread-writecurrentThis object identifies whether port 1 is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.10Columncm4gptConfigPort2Nameread-writecurrentThis object identifies a user definable name for port 2.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.11Columncm4gptConfigPort2Enableread-writecurrentThis object identifies whether port 2 is enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3Tablecm4gptLedTablenot-accessiblecurrentTable of CM-4GPT type media converter module's LED status information.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1Rowcm4gptLedEntrynot-accessiblecurrentEntries of the table, each relating to a separate CM-4GPT type media converter module.
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.2Columncm4gptLedsSlotIndexnot-accessiblecurrentThe Slot number the CM-4GPT type module is currently inserted
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.3Columncm4gptLedPWRread-onlycurrentThis object identifies the status of the power (PWR) LED on the media converter module. Possible status values are: off(0) - No power to the module onGreen(1) …
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.4Columncm4gptLedLK1read-onlycurrentThis object identifies the status of the port 1 link (LK1) LED on the media converter module. Possible status values are: off(0) - No link on(1) - Port link pr…
1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.5Columncm4gptLedLK2read-onlycurrentThis object identifies the status of the port 2 link (LK2) LED on the media converter module. Possible status values are: off(0) - No link on(1) - Port link pr…
1.3.6.1.4.1.1966.21.1.1.1.1.5TablemcrSfpDmiModuleTablenot-accessiblecurrentTable of SFP Diagnostic Monitoring Interface information for Optical Transceivers
1.3.6.1.4.1.1966.21.1.1.1.1.5.1RowmcrSfpDmiModuleEntrynot-accessiblecurrentEntries of the table, each relating to a separate SFP module.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.2ColumnsfpDmiSlotIndexnot-accessiblecurrentThe Slot number of the media converter module containing this SFP/XFP
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.3ColumnsfpDmiMediaPortIndexnot-accessiblecurrentMedia converter module port index.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.4ColumnsfpDmiStatusread-onlycurrentThis object identifies the status of the SFP module. If sfpCommFailed bit is set then the rest of the data in this entry is invalid
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.5ColumnsfpDmiConnectorTyperead-onlycurrentThis object identifies the SFP DMI connector type.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.6ColumnsfpDmiNominalBitRateread-onlycurrentThis object identifies the SFP DMI nominal bit rate of fiber interface, in megabits per second.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.7ColumnsfpDmiLinkReach9125read-onlycurrentThis object identifies the SFP DMI maximum length in meters of media supported by the fiber transceiver for 9 micron (125 micron jacket) single-mode fiber.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.8ColumnsfpDmiLinkReach50125read-onlycurrentThis object identifies the SFP DMI maximum length in meters of media supported by the fiber transceiver for 50 micron (125 micron jacket) multi-mode fiber.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.9ColumnsfpDmiLinkReach625125read-onlycurrentThis object identifies the SFP DMI maximum length in meters of media supported by the fiber transceiver for 62.5 micron (125 micron jacket) multi-mode fiber.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.10ColumnsfpDmiFiberWaveLengthread-onlycurrentThis object identifies the wavelength of the fiber interface's optical transceiver, in nanometers.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.11ColumnsfpDmiCurrentTempStateread-onlycurrentThis object identifies the current alarm status for SFP DMI internally measured temperature.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.12ColumnsfpDmiRealTimeTempread-onlycurrentThis object identifies the SFP DMI real time temperature. The value displayed will be either Celsius or Fahrenheit based on your current regional display setti…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.13ColumnsfpDmiHighTempWarnread-onlycurrentThis object identifies the SFP DMI high temperature warning threshold. The value displayed will be either Celsius or Fahrenheit based on your current regional …
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.14ColumnsfpDmiHighTempAlarmread-onlycurrentThis object identifies the SFP DMI high temperature warning threshold. The value displayed will be either Celsius or Fahrenheit based on your current regional …
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.15ColumnsfpDmiLowTempWarnread-onlycurrentThis object identifies the SFP DMI high temperature warning threshold. The value displayed will be either Celsius or Fahrenheit based on your current regional …
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.16ColumnsfpDmiLowTempAlarmread-onlycurrentThis object identifies the SFP DMI high temperature warning threshold. The value displayed will be either Celsius or Fahrenheit based on your current regional …
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.17ColumnsfpDmiCurrentVoltStateread-onlycurrentThis object identifies current alarm status for SFP DMI internally measured voltage.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.18ColumnsfpDmiRealTimeVoltread-onlycurrentThis object identifies the SFP DMI real time voltage in Volts.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.19ColumnsfpDmiHighVoltWarnread-onlycurrentThis object identifies the SFP DMI high voltage warning threshold in Volts
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.20ColumnsfpDmiHighVoltAlarmread-onlycurrentThis object identifies the SFP DMI high voltage warning threshold in Volts
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.21ColumnsfpDmiLowVoltWarnread-onlycurrentThis object identifies the SFP DMI high voltage warning threshold in Volts
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.22ColumnsfpDmiLowVoltAlarmread-onlycurrentThis object identifies the SFP DMI high voltage warning threshold in Volts
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.23ColumnsfpDmiCurrentTxBiasStateread-onlycurrentThis object identifies current alarm status for SFP DMI internally measured transmit bias current in milliamps.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.24ColumnsfpDmiRealTimeTxBiasread-onlycurrentThis object identifies the SFP DMI high TX Bias current in milliamps.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.25ColumnsfpDmiHighTxBiasWarnread-onlycurrentThis object identifies the SFP DMI high TX Bias current warning threshold in milliamps.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.26ColumnsfpDmiHighTxBiasAlarmread-onlycurrentThis object identifies the SFP DMI high TX Bias current alarm threshold in milliamps.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.27ColumnsfpDmiLowTxBiasWarnread-onlycurrentThis object identifies the SFP DMI low TX Bias current warning threshold in milliamps.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.28ColumnsfpDmiLowTxBiasAlarmread-onlycurrentThis object identifies the SFP DMI low TX Bias current alarm threshold in milliamps.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.29ColumnsfpDmiCurrentTxPowerStateread-onlycurrentThis object identifies current alarm status for SFP DMI internally measured transmit power.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.30ColumnsfpDmiRealTimeTxPowerread-onlycurrentThis object identifies the SFP DMI real time TX output power. The value displayed will be either millwatts or Dbm based on your current regional display settin…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.31ColumnsfpDmiHighTxPowerWarnread-onlycurrentThis object identifies the SFP DMI high TX output power warning threshold. The value displayed will be either millwatts or Dbm based on your current regional d…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.32ColumnsfpDmiHighTxPowerAlarmread-onlycurrentThis object identifies the SFP DMI high TX output power alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional dis…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.33ColumnsfpDmiLowTxPowerWarnread-onlycurrentThis object identifies the SFP DMI low TX output power warning threshold. The value displayed will be either millwatts or Dbm based on your current regional di…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.34ColumnsfpDmiLowTxPowerAlarmread-onlycurrentThis object identifies the SFP DMI low TX output power alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional disp…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.35ColumnsfpDmiCurrentRxPowerStateread-onlycurrentThis object identifies current alarm status for SFP DMI internally measured receive power.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.36ColumnsfpDmiRealTimeRxPowerread-onlycurrentThis object identifies the SFP DMI real time RX received optical power. The value displayed will be either millwatts or Dbm based on your current regional disp…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.37ColumnsfpDmiHighRxPowerWarnread-onlycurrentThis object identifies the SFP DMI high RX received optical warning threshold. The value displayed will be either millwatts or Dbm based on your current region…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.38ColumnsfpDmiHighRxPowerAlarmread-onlycurrentThis object identifies the SFP DMI high RX received optical alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.39ColumnsfpDmiLowRxPowerWarnread-onlycurrentThis object identifies the SFP DMI low RX received optical warning threshold. The value displayed will be either millwatts or Dbm based on your current regiona…
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.40ColumnsfpDmiLowRxPowerAlarmread-onlycurrentThis object identifies the SFP DMI low RX received optical alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional …
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.41ColumnsfpDmiStatus2read-onlycurrentThis object identifies the status of the SFP module. If sfpCommFailed value is set then the rest of the data in this entry is invalid 0x80 - sfpModuleInserted …
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.42ColumnsfpDmiVendorSerialNumberread-onlycurrentThis object identifies the SFP DMI serial number.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.43ColumnsfpDmiVendorNameread-onlycurrentThis object identifies the SFP DMI serial number.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.44ColumnsfpDmiVendorPartNumberread-onlycurrentThis object identifies the SFP DMI serial number.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.45ColumnxfpDmiAux1Typeread-onlycurrentThis object identifies the type of value that is being measured by the Auxillary 1 registers on the XFP
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.46ColumnxfpDmiAux1Stateread-onlycurrentThis object identifies current alarm status for the XFP Aux1 registers
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.47ColumnxfpDmiRealTimeAux1read-onlycurrentThis object identifies the XFP DMI real time values for the Aux1 registers
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.48ColumnxfpDmiHighAux1Warnread-onlycurrentThis object identifies the XFP DMI high warning threshold for Aux1
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.49ColumnxfpDmiHighAux1Alarmread-onlycurrentThis object identifies the XFP DMI alarm alarm threshold for Aux1
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.50ColumnxfpDmiLowAux1Warnread-onlycurrentThis object identifies the XFP DMI low warning threshold for Aux1
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.51ColumnxfpDmiLowAux1Alarmread-onlycurrentThis object identifies the XFP DMI low alarm threshold for Aux1
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.52ColumnxfpDmiAux2Typeread-onlycurrentThis object identifies the type of value that is being measured by the Auxillary 1 registers on the XFP
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.53ColumnxfpDmiAux2Stateread-onlycurrentThis object identifies current alarm status for the XFP Aux2 registers
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.54ColumnxfpDmiRealTimeAux2read-onlycurrentThis object identifies the SFP DMI real time values for the Aux2 registers
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.55ColumnxfpDmiHighAux2Warnread-onlycurrentThis object identifies the XFP DMI high warning threshold for Aux2
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.56ColumnxfpDmiHighAux2Alarmread-onlycurrentThis object identifies the XFP DMI alarm alarm threshold for Aux2
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.57ColumnxfpDmiLowAux2Warnread-onlycurrentThis object identifies the XFP DMI low warning threshold for Aux2
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.58ColumnxfpDmiLowAux2Alarmread-onlycurrentThis object identifies the XFP DMI low alarm threshold for Aux2
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.59ColumnxfpDmiMinBitRateread-onlycurrentThis object specifies the XFP minimum bit rate.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.60ColumnxfpDmiMaxBitRateread-onlycurrentThis object specifies the XFP maximum bit rate.
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.61ColumnxfpDmiReachEBW50125read-onlycurrentThis object specifies the link length that is supported by the fiber transceiver using extended bandwidth 50 micron core (125 micron jacket) multimode fiber
1.3.6.1.4.1.1966.21.1.1.1.1.5.1.62ColumnsfpDmiReachCopperread-onlycurrentThis object identifies the maximum length in meters that is supported by the SFP/XFP interface using copper cable.
1.3.6.1.4.1.1966.21.1.1.1.1.6TablemcrAlarmsWarningsTablenot-accessiblecurrentTable of outstanding alarms and warnings.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1RowmcrAlarmsWarningsEntrynot-accessiblecurrentEntries of the table, each relating to a separate alarm or warning.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.2ColumnalarmWarnSequenceIndexnot-accessiblecurrentThis object identifies the sequence in which the alarms or warnings were generated. Gaps in the sequence numbers are normal.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.3ColumnalarmWarnTyperead-onlycurrentThis object identifies the alert/Trap number associated with this alarm/warning.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.4ColumnalarmWarnSeverityread-onlycurrentThis object identifies the severity level of the alarm/warning. Value will be one of the top three levels.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.5ColumnalarmWarnFlagsread-onlycurrentThis object identifies the flags defining the alarm/warning. 0x00000002 - chassis type alert 0x00000004 - Power Supply Monitoring Unit type alert 0x00000008 - …
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.6ColumnalarmWarnChassisNumread-onlycurrentThis object identifies the chassis number associated with this alarm/warning.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.7ColumnalarmWarnDeviceNumread-onlycurrentThis object identifies the Hardware slot/bay location of the hardware associated with this alarm or warning. - 0 indicates alarm/warning occurred on the chassi…
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.8ColumnalarmWarnTimeStampread-onlycurrentThis object identifies the time stamp of when the alarm/warning was reported. (in seconds since the Epoch, defined as 0:00:00 UTC on the morning of January 1, …
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.9ColumnalarmWarnMessageread-onlycurrentThis object identifies the alarm/warning message string which will contain any values of bound variables.
1.3.6.1.4.1.1966.21.1.1.1.1.6.1.10ColumnalarmWarnPortNumread-onlycurrentThis object identifies the location of the media port associated with this alarm or warning.
1.3.6.1.4.1.1966.21.1.1.1.1.7TablemcrMediaPortTablenot-accessiblecurrentTable of general port status information.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1RowmcrMediaPortEntrynot-accessiblecurrentEntries of the table, each relating to a separate media converter module port.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.2ColumnmediaPortSlotIndexnot-accessiblecurrentSlot number for the media converter module containing this port.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.3ColumnmediaPortPortIndexnot-accessiblecurrentPort number on media card. Valid values are 1 to the highest number of ports available on a media card. There are usually two ports
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.4ColumnmoduleModelread-onlycurrentThis object identifies the model name of the module containing this port.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.5ColumnportNameread-onlycurrentThis object identifies the name configured for this port.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.6ColumnportEnableread-onlycurrentThis object indicates whether the port has been enabled.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.7ColumnportTyperead-onlycurrentThe type of port (copper, fiber, etc.) .
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.8ColumnportLinkStatusread-onlycurrentThe port's current link status.
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.9ColumnportConnTyperead-onlycurrentThe port's connector type
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.10ColumnportAutoNegStateread-onlycurrentThe port's auto-negotiation state
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.11ColumnportSpeedread-onlycurrentIf the port auto-negotiation state is complete then this object indicates the ports current auto-negotiated speed setting. If auto-negotiation is not complete …
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.12ColumnportDuplexread-onlycurrentIf port auto-negotiation state is complete then this object indicates the media converter module's current auto-negotiated duplex setting for this port. If aut…
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.13ColumnportPauseread-onlycurrentIf port auto-negotiation state is complete then this object indicates the media converter module's current auto-negotiated pause setting for this port. If auto…
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.14ColumnportRemoteStatusread-onlycurrentThis port's Link Partner Remote Fault status or Far End Fault status
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.15ColumnportMediaTyperead-onlycurrentThe type of port (copper, fiber, etc.) .
1.3.6.1.4.1.1966.21.1.1.1.1.7.1.16ColumnportPhysicalProtocolread-onlycurrentThe physical networking protocol used by the port.
1.3.6.1.4.1.1966.21.1.1.1.2NodemcrManagementGroup
1.3.6.1.4.1.1966.21.1.1.1.2.1NodemgtNetworkGroup
1.3.6.1.4.1.1966.21.1.1.1.2.1.1NodesystemGroup
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.1ScalarsystemStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.2ScalarsystemNameread-writecurrentThe name of the system management module.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.3ScalarsystemDomainNameread-writecurrentThe domain name of the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.4ScalarsystemIpAddressread-writecurrentThe management module's unique IPv4 network IP address. If you are using the management module in an IPv6 network, this field can be left blank.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.5ScalarsystemSubnetBitsread-writecurrentThe number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the v…
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.6ScalarsystemDHCPUpdateDNSread-writecurrentIf enabled, the DNS system will be updated after the management module gets the IP address via DHCP.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.7ScalarsystemAutoObtainDNSread-writecurrentIf on, the DNS server IP address will be obtained automatically automatically via DHCP.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.8ScalarsystemAutoObtainGWread-writecurrentIf enabled, the default gateway IP address will be get automatically via DHCP.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.9ScalarsystemDomainPrefixread-writecurrentThe domain prefix for primary Ethernet interface of the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.10ScalarsystemTFTPRetryread-writecurrentThe number of times the management module will attempt to transfer (using TFTP) a file to/from a host. Default is 5. A value of 0 (zero) means that the managem…
1.3.6.1.4.1.1966.21.1.1.1.2.1.1.11ScalarsystemTFTPTimeOutread-writecurrentThe time, in seconds, that the management module will wait for a successful transmit or receipt of TFTP packets before retrying a TFTP transfer. Default is 3 s…
1.3.6.1.4.1.1966.21.1.1.1.2.1.2TablegatewayTablenot-accessiblecurrentTable of configured gateway.
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1RowgatewayEntrynot-accessiblecurrentEntries of the table, each relating to a separate configured gateway.
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.1ColumngatewayIndexnot-accessiblecurrentgatewayIndex
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.2ColumngatewayStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.3ColumngatewayHostread-writecurrentYou can specify up to twenty hosts to act as gateways in your network. Each gateway host must be defined in the management module host table.
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.4ColumngatewayTyperead-writecurrentSpecify the type of gateway: Default-A gateway which provides general access beyond your local network. Host-A gateway reserved for accessing a specific host e…
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.5ColumngatewayIpAddressread-writecurrentWhen the gateway is a Host or Network gateway, you must specify the IP address of the target host machine/network.
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.6ColumngatewaySubnetBitsread-writecurrentWhen the gateway is a Network gateway, you must specify the subnet/prefix bits for that network. If the IP address is IPv4, then the Subnet/Prefix Bits range i…
1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.7ColumngatewayInterfaceread-writecurrentThe interface that the management module is going to use to access the Remote Host.
1.3.6.1.4.1.1966.21.1.1.1.2.1.3TablehostTablenot-accessiblecurrentThe hosts Group table.
1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1RowhostEntrynot-accessiblecurrentAn entry in the host table, each relating to a separate host.
1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.1ColumnhostIndexnot-accessiblecurrentThe table entry number for this host.
1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.2ColumnhostStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.3ColumnhostNameread-writecurrentThe host name used for this host entry. To delete an entry, blank out this field. If blank, this entry is currently unused.
1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.4ColumnhostIpAddrread-writecurrentThe host IP address used for this entry.
1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.5ColumnhostFqdnread-writecurrentThe host full qualified domain name for the host entry. If blank, this entry is currently unused.
1.3.6.1.4.1.1966.21.1.1.1.2.1.4TablednsTablenot-accessiblecurrentTable of DNS hosts
1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1RowdnsEntrynot-accessiblecurrentEntries of the table, each relating to a separate DNS host.
1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.1ColumndnsIndexnot-accessiblecurrentDNS host index
1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.2ColumndnsStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.3ColumndnsIpAddressread-writecurrentYou can specify the IP addresses for up to two DNS (Domain Name Servers) hosts in your network. The first DNS entry in the list is the primary DNS and the seco…
1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.4ColumndnsActiveread-writecurrentActivates/deactivates a DNS entry.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5NodedynamicDNSGroup
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.1ScalardynamicDNSStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.2ScalardynamicDNSread-writecurrentEnable/disable dynamic DNS.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.3ScalardynamicDNSHostnameread-writecurrentHost name.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.4ScalardynamicDNSUserNameread-writecurrentUser name.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.5ScalardynamicDNSPasswordread-writecurrentThis object identifies the dynamic DNS password. Reading of this object will always return a blank string
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.6ScalardynamicDNSSystemTyperead-writecurrentSystem type.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.7ScalardynamicDNSWildCardread-writecurrentSpecifies whether to add a alias such as * to your registered host name.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.8ScalardynamicDNSConnectionMethodread-writecurrentSpecifies how the management module is going to connection to the DynDNS.org server.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.9ScalardynamicDNSSSLVerifyPeerCertificateread-writecurrentEnable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to downl…
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.10ScalardynamicDNSSSLCountryread-writecurrentA two character country code; for example, US.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.11ScalardynamicDNSSSLStateProvread-writecurrentUp to a 128 character entry for the state/province; for example, IL.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.12ScalardynamicDNSSSLLocalityread-writecurrentUp to a 128 character entry for the location; for example, a city.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.13ScalardynamicDNSSSLOrganisationread-writecurrentUp to a 64 character entry for the organization; for example, Accounting.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.14ScalardynamicDNSSSLOrganisationUnitread-writecurrentUp to a 64 character entry for the unit in the organization; for example, Payroll.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.15ScalardynamicDNSSSLCommonNameread-writecurrentUp to a 64 character entry for common name; for example, the host name or fully qualified domain name.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.16ScalardynamicDNSSSLEmailread-writecurrentUp to a 64 character entry for an email address; for example, acct@anycompany.com.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.17ScalardynamicDNSStatusStringread-onlycurrentDynamic DNS statistics
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18TabledynamicDNSSSLCipherTablenot-accessiblecurrentSSL Cipher.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1RowdynamicDNSSSLCipherEntrynot-accessiblecurrentAn entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.1ColumndynamicDNSSSLCipherPrioritynot-accessiblecurrentThe cipher priority. 1- highest 5 - lowest.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.2ColumndynamicDNSSSLCipherStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.3ColumndynamicDNSSSLCipherEncryptionread-writecurrentSSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.4ColumndynamicDNSSSLCipherKeySizeMinread-writecurrentThe minimum key size value that will be used for the specified encryption type. The default is 40.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.5ColumndynamicDNSSSLCipherKeySizeMaxread-writecurrentThe maximum key size value that will be used for the specified encryption type. The default is 256.
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.6ColumndynamicDNSSSLCipherKeyExchangeread-writecurrentThe type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RS…
1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.7ColumndynamicDNSSSLCipherHMACread-writecurrentSelect the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6Nodeipv6Group
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1Nodeipv6ServicesGroup
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1.1Scalaripv6serviceStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1.2ScalarserviceAutoDiscoveryread-writecurrentWhen on, the management module will send out a Router Solicitation message. If a Router Advertisement message is received, the management module will configure…
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1.3ScalarserviceDHCPv6read-writecurrentWhen on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1.4ScalarserviceDHCPv6IPAddressesread-writecurrentWhen on, the management module will accept IPv6 address(es) from the DHCPv6 server.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1.5ScalarserviceDHCPv6NetworkPrefixread-writecurrentWhen on, the management module will accept the network prefix from the DHCPv6 server.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.1.6ScalarserviceDHCPv6AutoObtainDNSread-writecurrentIf on, the DNS server IP address will be obtained automatically automatically via DHCP.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2Tableipv6AddressTablenot-accessiblecurrentIPv6 custom address table.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1Rowipv6AddressEntrynot-accessiblecurrentIPv6 custom entry.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.1Columnipv6AddressIndexnot-accessiblecurrentCustom IPv6 address index.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.2Columnipv6AddressStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.3Columnipv6AddressAddrread-writecurrentEither enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address (must turn ipv6AddressAuto1 on) o…
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.4Columnipv6AddressPrefixBitsread-writecurrentThe IPv6 prefix bits of either the network or IPv6 address.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.5Columnipv6AddressAutoread-writecurrentWhen on, the management module will derive an IPv6 address from the entered network prefix and the management module's MAC address.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.6Columnipv6AddressSendAdvertiseread-writecurrentWhen on, the management module will include the IPv6 address in router advertisements.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3Tableinterfacev6StatsTablenot-accessiblecurrentThe interface IPv6 Group table.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1Rowinterfacev6StatsEntrynot-accessiblecurrentAn entry in the interface IPv6 table
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.1Columninterfacev6Indexnot-accessiblecurrentThe IPv6 interface index.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.2Columninterfacev6Nameread-onlycurrentThe IPv6 interface name.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.3Columninterfacev6Addressread-onlycurrentThe IPv6 interface IP address.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.4Columninterfacev6PrefixBitsread-onlycurrentThe IPv6 interface Prefix bits
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.5Columninterfacev6Scoperead-onlycurrentThe IPv6 interface scope.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4Tableipv6TunnelTablenot-accessiblecurrentIPv6 tunnel table.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1Rowipv6TunnelEntrynot-accessiblecurrentIPv6 tunnel entry.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.1Columnipv6TunnelIndexnot-accessiblecurrentThe IPv6 tunnel index.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.2Columnipv6TunnelStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.3Columnipv6TunnelNameread-writecurrentThe name of the IPv6 tunnel. Maximum 16 alphanumeric characters.
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.4Columnipv6TunnelModeread-writecurrentThe method or protocol that is used to create the IPv6 tunnel. o Manual-When specified, the management module will manually create the IPv6 tunnel to the speci…
1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.5Columnipv6TunnelRemoteHostread-writecurrentThe IPv4 host that can access the IPv6 network when the Mode is Manual. The Teredo server when the Mode is Teredo.
1.3.6.1.4.1.1966.21.1.1.1.2.2NodemgtAccessGroup
1.3.6.1.4.1.1966.21.1.1.1.2.2.1NodemgtAcessServicesGroup
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.1ScalaraccessServicesStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.2ScalaraccessServicesSessInactTimeoutread-writecurrentThe amount of time, in seconds, that the management session inactivity timer will run. When the timer expires, becuase no activity on the management session wi…
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.3ScalaraccessServiceHTTPDread-writecurrentTurn on/off the HTTPD Service
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.4ScalaraccessServiceHTTPSDread-writecurrentTurn on/off the HTTPSD Service
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.5ScalaraccessServiceTelnetDread-writecurrentTurn on/off the TelnetD Service
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.6ScalaracessServiceSSHDread-writecurrentTurn on/off the SSHD Service
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.7ScalaracessServiceSnmpDread-writecurrentTurn on/off the SnmpD Service
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.8ScalaracessServiceSetIPread-writecurrentTurn on/off the SetIP Service
1.3.6.1.4.1.1966.21.1.1.1.2.2.1.9ScalaracessIncomingPingsread-writecurrentAllow incoming ping requests.
1.3.6.1.4.1.1966.21.1.1.1.2.2.2NodewebManagerGroup
1.3.6.1.4.1.1966.21.1.1.1.2.2.2.1ScalarwebManagerStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.2.2ScalarhttpsPassphraseread-writecurrentThis object identifies the HTTPS SSL certificate passphrase. Reading of this object will always return a blank string
1.3.6.1.4.1.1966.21.1.1.1.2.2.3NodesshServerGroup
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.1ScalarsshServerStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.2ScalarsshServerAuthRSAread-writecurrentWhen a client SSH session requests RSA authentication, the management module's SSH server will authenticate the user via RSA.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.3ScalarsshServerAuthDSAread-writecurrentWhen a client SSH session requests DSA authentication, the management module's SSH server will authenticate the user via DSA
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.4ScalarsshServerAuthKeyboardread-writecurrentThe user types in a password for authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.5ScalarsshServerAuthPasswordread-writecurrentThe user types in a password for authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.6ScalarsshServerCipher3Desread-writecurrentThe management module SSH server's 3DES encryption is enable/disabled.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.7ScalarsshServerCipherBlowfishread-writecurrentThe management module SSH server's Blowfish encryption is enabled/disabled.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.8ScalarsshServerCipherCipherAESread-writecurrentThe management module SSH server's AES encryption is enabled/disabled
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.9ScalarsshServerCipherCASTread-writecurrentThe management module SSH server's CAST encryption is enabled/disabled
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.10ScalarsshServerCipherArcfourread-writecurrentThe management module SSH server's Arcfour encryption is enabled/disabled.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.11ScalarsshServerVerboseread-writecurrentDisplays debug messages on the terminal.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.12ScalarsshServerCompressionread-writecurrentRequests compression of all data. Compression is desirable on slow connections, but will only slow down things on fast networks.
1.3.6.1.4.1.1966.21.1.1.1.2.2.3.13ScalarsshServerSSH1read-writecurrentEnable/Disable SSH-1 on the server.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4NodesnmpAgentGroup
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.1ScalarsnmpAgentStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.2ScalarsnmpContactread-writecurrentThe name and contract information of the person who manages this SMNP node.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.3ScalarsnmpLocationread-writecurrentThe physical location of the SNMP node.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4TablesnmpCommunityTablenot-accessiblecurrentTable of SNMP communities configured for the MCR-MGT agent
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1RowsnmpCommunityEntrynot-accessiblecurrentEntries of the table, each relating to a separate SNMP community definition
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.1ColumnsnmpCommunityIndexnot-accessiblecurrentThe MCR-MGT agent community index
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.2ColumnsnmpCommunityStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.3ColumnsnmpCommunityNameread-writecurrentA name that will be sent to the management module from an SNMP manager. This name will define the permissions of the manager.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.4ColumnsnmpCommunityIpAddressread-writecurrentThe IP address of the SNMP manager that will send requests to the management module. If the address is 0.0.0.0, any SNMP manager with the Community Name can ac…
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.5ColumnsnmpCommunityPermissionread-writecurrentPermits the management module to respond to SNMP requests by: None -There is no response to requests from SNMP. Readonly -Responds only to Read requests from S…
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5NodesnmpV3ReadOnlyUser
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.1ScalarsnmpV3ReadOnlyStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.2ScalarsnmpV3ReadOnlyUserNameread-writecurrentSNMP v3 read-only user name. This SNMP v3 user will have read-only S SNMP access permissions.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.3ScalarsnmpV3ReadOnlySecurityLevelread-writecurrentSpecifies the SNMP v3 read-only user security level.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.4ScalarsnmpV3ReadOnlyAuthAlgorithmread-writecurrentSpecifies the SNMP v3 read-only user authentication method.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.5ScalarsnmpV3ReadOnlyAuthPasswdread-writecurrentSpecifies the SNMP v3 read-only user authentication password.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.6ScalarsnmpV3ReadOnlyPrivacyAlgorithmread-writecurrentSpecifies the SNMP v3 read-only user privacy algorithm.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.5.7ScalarsnmpV3ReadOnlyPrivacyPasswdread-writecurrentSpecifies the SNMP v3 read-only user privacy password.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6NodesnmpV3ReadWriteUser
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.1ScalarsnmpV3ReadWriteStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.2ScalarsnmpV3ReadWriteUserNameread-writecurrentSpecifies the SNMP v3 read-write user name. This SNMP v3 user will have read-write SNMP access permissions.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.3ScalarsnmpV3ReadWriteSecurityLevelread-writecurrentSpecifies the SNMP v3 read-write user security level.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.4ScalarsnmpV3ReadWriteAuthAlgorithmread-writecurrentSpecifies the SNMP v3 read-write user authentication method.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.5ScalarsnmpV3ReadWriteAuthPasswdread-writecurrentSpecifies the SNMP v3 read-write user authentication password.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.6ScalarsnmpV3ReadWritePrivacyAlgorithmread-writecurrentSpecifies the SNMP v3 read-write user privacy algorithm.
1.3.6.1.4.1.1966.21.1.1.1.2.2.4.6.7ScalarsnmpV3ReadWritePrivacyPasswdread-writecurrentSpecifies the SNMP v3 read-write user privacy password.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5NodeauthorizedHostGroup
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.1ScalarauthHostsStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.2ScalarauthHostOnlyread-writecurrentDetermines whether only authorized hosts are allowed to access the management module. If set to yes then the management module will only respond to, and allow …
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3TableauthIpHostTablenot-accessiblecurrentThe hosts Group table.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1RowauthIpHostEntrynot-accessiblecurrentAn entry in the AuthIpHostTable, each relating to a IP host.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.1ColumnauthHostIpIndexnot-accessiblecurrentThe table entry number for this host.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.2ColumnauthHostIpStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.3ColumnauthHostIpAddrread-writecurrentThe host IP address used for this entry.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.4ColumnauthHostIpDescrread-writecurrentThe host IP entry description.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4TableauthMacHostTablenot-accessiblecurrentThe hosts Group table.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1RowauthMacHostEntrynot-accessiblecurrentAn entry in the AuthIpHostTable, each relating to a host.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.1ColumnauthHostMacIndexnot-accessiblecurrentThe table entry number for this host.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.2ColumnauthHostMacStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.3ColumnauthHostMacAddrread-writecurrentThe host MAC address used for this entry.
1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.4ColumnauthHostMacDescrread-writecurrentThe host MAC address entry description.
1.3.6.1.4.1.1966.21.1.1.1.2.3NodemgtAlertGroup
1.3.6.1.4.1.1966.21.1.1.1.2.3.1NodealertLocalEventGroup
1.3.6.1.4.1.1966.21.1.1.1.2.3.1.1ScalarlocalEventLogStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.3.1.2ScalarlocalEventLogEnabledread-writecurrentDetermines whether alert events are logged to the internal local event log.
1.3.6.1.4.1.1966.21.1.1.1.2.3.1.3ScalarlocalEventLogAlertLevelread-writecurrentChoose the alert level that will trigger a local event being stored in the local event log. When you select an alert level, all alerts that appear above it in …
1.3.6.1.4.1.1966.21.1.1.1.2.3.1.4ScalarlocalEventLogClearread-writecurrentWriting a yes(1) to this object will clear the local event log on the management module. Reading of this object will always return 0
1.3.6.1.4.1.1966.21.1.1.1.2.3.2NodealertSyslogGroup
1.3.6.1.4.1.1966.21.1.1.1.2.3.2.1ScalarsyslogStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.3.2.2ScalarsyslogEnabledread-writecurrentDetermines whether syslog is enabled.
1.3.6.1.4.1.1966.21.1.1.1.2.3.2.3ScalarsyslogSeverityLevelread-writecurrentChoose the severity level that will trigger a syslog message: Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug When you select a severity level,…
1.3.6.1.4.1.1966.21.1.1.1.2.3.2.4ScalarsyslogPrimaryHostread-writecurrentThe first preconfigured host that the management module will attempt to send system log messages to; messages will be displayed on the host's monitor.
1.3.6.1.4.1.1966.21.1.1.1.2.3.2.5ScalarsyslogSecondaryHostread-writecurrentIf the management module cannot communicate with the primary host, then the management module will attempt to send system log messages to this preconfigured ho…
1.3.6.1.4.1.1966.21.1.1.1.2.3.3NodealertSnmpTrapGroup
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.1ScalarsnmpTrapStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.2ScalarsnmpTrapEnabledread-writecurrentDetermines whether SNMP Traps are enabled.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.3ScalarsnmpTrapAlertLevelread-writecurrentChoose the alert level that will trigger a SNMP trap message to be sent if SNMP traps is enabled. When you select an alert level, all alerts that appear above …
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4TablesnmpTrapHostTablenot-accessiblecurrentTable of SNMP Trap Hosts information.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1RowsnmpTrapHostEntrynot-accessiblecurrentEntries of the table, each relating to a separate SNMP trap host.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.1ColumnsnmpTrapHostIndexaccessible-for-notifycurrentThis object identifies the SNMP trap host index.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.2ColumnsnmpTrapHostStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.3ColumnsnmpTrapHostIpAddressread-writecurrentDefines the hosts (by IP address) that will receive trap messages generated by the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.4ColumnsnmpTrapHostUdpPortread-writecurrentDefines the UDP port number the SNMP trap host will listen on to receive trap messages generated by the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.5ColumnsnmpTrapHostVersionread-writecurrentDefines the SNMP version of the traps sent to this host. If snmpTrapV3 is selected then the SNMP trap v3 user
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.6ColumnsnmpTrapHostTyperead-writecurrentIf set to snmpInform(1) the management module will send traps via an INFORM-PDU, expecting a response from the trap host, retransmitting if required. Otherwise…
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.7ColumnsnmpTrapHostCommunityread-writecurrentAn arbitrary trap community name. This object is ignored for SNMP v3
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.8ColumnsnmpTrapHostEnableread-writecurrentIf set to No, the management module will not use this table entry to send traps.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5NodesnmpV3TrapUser
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.1ScalarsnmpV3TrapUserStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.2ScalarsnmpV3TrapUserUserNameread-writecurrentSNMP trap v3 user name. This user will be used for every SNMP trap host that is using snmpTrapHostVersion of snmpTrapV3(2)
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.3ScalarsnmpV3TrapUserSecurityLevelread-writecurrentSNMP trap v3 user security level.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.4ScalarsnmpV3TrapUserAuthAlgorithmread-writecurrentSNMP trap v3 user authentication method.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.5ScalarsnmpV3TrapUserAuthPasswdread-writecurrentSNMP trap v3 user authentication password.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.6ScalarsnmpV3TrapUserPrivacyAlgorithmread-writecurrentSNMP trap v3 user privacy algorithm.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.5.7ScalarsnmpV3TrapUserPrivacyPasswdread-writecurrentSNMP trap v3 user privacy password.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.6ScalarsnmpTrapGlbHostTimeoutread-writecurrentDefines the timeout in miliseconds between retries of sending the SNMP INFORM-PDU if no response is received for the trap host.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.7ScalarsnmpTapGlobHostRetriesread-writecurrentDefines the number of retries to send the SNMP INFORM-PDU trap if no response is received from the trap host.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.8ScalarsnmpV3LocalEngineIDread-onlycurrentAn SNMPv3 engine ID used by the MCR-MGT for identification when sending SNMP v3 traps.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.9ScalarsnmpV3LocalEngineIDTextSuffixread-writecurrentThis configured text is used to build the suffix of the SNMPv3 engine ID
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10NodesnmpTrapVarsGroup
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.1ScalarmgtAccessMethodaccessible-for-notifycurrentDefines the management protocol used to access the management module
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.2ScalarremoteMgtIpAddressaccessible-for-notifycurrentDefines the remote IP address accessing the management module
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.3ScalarremoteTftpHostaccessible-for-notifycurrentDefines the remote TFTP server IP address or host name performing the TFP file transfer
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.4ScalarremoteTftpFileNameaccessible-for-notifycurrentDefines the remote TFTP file name
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.5ScalarnetworkIpAddressaccessible-for-notifycurrentDefines the IP address assigned to the management module
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.6ScalarmcrMediaPortNumaccessible-for-notifycurrentThis object identifies the media converter module port number.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.7ScalarmcrMediaPortDescraccessible-for-notifycurrentA description of the media port that consists of the user defined media port name, followed by the system name for the port.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.8ScalareventSeverityLevelaccessible-for-notifycurrentThe severity level of the event that generated this trap.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.9ScalarxfpDmiRealTimeAuxread-onlycurrentThis object identifies the XFP DMI real time values for one of the auxillary register sets.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.10ScalarxfpDmiHighAuxWarnread-onlycurrentThis object identifies the XFP DMI high warning threshold for one of the auxillary register sets.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.11ScalarxfpDmiHighAuxAlarmread-onlycurrentThis object identifies the XFP DMI alarm alarm threshold for one of the auxillary register sets.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.12ScalarxfpDmiLowAuxWarnread-onlycurrentThis object identifies the XFP DMI low warning threshold for one of the auxillary register sets.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.13ScalarxfpDmiLowAuxAlarmread-onlycurrentThis object identifies the XFP DMI low alarm threshold for one of the auxillary register sets.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.14ScalarmcrModuleSubTypeInsertedread-onlycurrentThis object identifies the module sub-type inserted in the slot.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.15ScalarmcrMediaBackedupModuleSubTyperead-onlycurrentThis object identifies the module sub-type of the backup configuration.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.16ScalarmcrMediaPortBandwidthaccessible-for-notifycurrentThis object identifies the media converter module port's current bandwith in kbps.
1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.17ScalarmcrMediaPortBandwidthThresholdaccessible-for-notifycurrentThis object identifies the media converter module port's bandwith threshold in kbps.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4NodealertEmailGroup
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.1ScalaremailStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.2ScalaremailEnabledread-writecurrentDetermines whether or not email notification is turned on. Default is Off.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.3ScalaremailAlertLevelread-writecurrentChoose the alert level that will trigger a email message to be sent if alert email is enabled. When you select an alert level, all alerts that appear above it …
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.4ScalaremailToread-writecurrentAn email address or list of email addresses that will receive the email notification.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.5ScalaremailFromread-writecurrentThis field can contain an email address that might identify the management module name or some other value.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.6ScalaremailSMTPHostread-writecurrentThe SMTP host (email server) that will process the email notification request. This can be either a host name defined in the management module host table or th…
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.7ScalaremailReplyread-writecurrentThe email address to whom all replies to the email notification should go.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.8ScalaremailSubjectread-writecurrentA text string, which can contain spaces, that will display in the Subject field of the email notification.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.9ScalaremailSMTPUsernameread-writecurrentThe user name for the SMTP server, if the server requires authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.10ScalaremailSMTPPasswordread-writecurrentThe password for the SMTP server, if the server requires authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.11ScalaremailSMTPEncryptionread-writecurrentThe encryption method for the SMTP server.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.12ScalaremailSMTPValidatePeerCertificateread-writecurrentValidate peer SSL/TLS certificate, when SSL or TLS encryption is used.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.13ScalaremailSMTPTcpPortread-writecurrentThe TCP port used for communicating with the SMTP server. For no encryption or TLS encryption, use port 25. For SSL encryption, use port 465.
1.3.6.1.4.1.1966.21.1.1.1.2.3.4.14ScalaremailSMTPDomainread-writecurrentThe domain for NTLM authentication with the SMTP server, if applicable.
1.3.6.1.4.1.1966.21.1.1.1.2.4NodemgtUsersGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.1ScalarmgtUsersStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.2ScalarmgtUsersByPassLoginEnabledread-writecurrentIndicates whether by pass login is enabled. When enable users will be automatically login as admin user. The will not be prompted for a user ID or password whe…
1.3.6.1.4.1.1966.21.1.1.1.2.4.3ScalarmgtUsersPrimaryAuthMethodread-writecurrentThe first authentication method that the management module attempts. Some type of authentication must be done by the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.4.4ScalarmgtUsersSecondaryAuthMethodread-writecurrentIf the Primary Authentication Method fails, the next authentication method that the management module attempts. You can choose to use authentication methods in…
1.3.6.1.4.1.1966.21.1.1.1.2.4.5ScalarmgtUsersAlwaysAttemptSecondread-writecurrentIf enabled, the secondary authentication method will always be used.
1.3.6.1.4.1.1966.21.1.1.1.2.4.6TablelocalUserAccountsTablenot-accessiblecurrentTable of locally defined user information
1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1RowlocalUserAccountsEntrynot-accessiblecurrentEntries of the table, each relating to separate user defined locally.
1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.1ColumnuserIndexnot-accessiblecurrentThe table entry number for this user.
1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.2ColumnuserStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.3ColumnuserNameread-writecurrentThe user name. To delete a user, set this field to blank. If blank, this entry is currently unused.
1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.4ColumnuserPasswordread-writecurrentThe password for the local user.
1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.5ColumnuserLevelread-writecurrentAdmin: Total access to the management module. More than one admin user account can exist, but we recommend that you only have one. operator: Full read only acc…
1.3.6.1.4.1.1966.21.1.1.1.2.4.7TablelocalUsersStatusTablenot-accessiblecurrentTable of locally defined user information
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1RowlocalUsersStatusEntrynot-accessiblecurrentEntries of the table, each relating to separate user defined locally.
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.1ColumnuserStatusIndexnot-accessiblecurrentThe table entry number for this user status.
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.2ColumnuserStatusNameread-onlycurrentThe user name. To delete a user, set this field to blank. If blank, this entry is currently unused.
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.3ColumnuserStatusMgtAccessTypenot-accessiblecurrentDefines the management protocol used to access the management module
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.4ColumnuserStatusRemoteIPAddressread-onlycurrentThis object specifies the remote IP address user management session.
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.5ColumnuserStatusStartTimeread-onlycurrentThis object identifies the date and time that the current user's management session started.
1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.6ColumnuserStatusLevelread-onlycurrentAdmin: Total access to the management module. More than one admin user account can exist, but we recommend that you only have one. operator: Full read only acc…
1.3.6.1.4.1.1966.21.1.1.1.2.4.8NoderadiusGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.1ScalarradiusStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.2ScalarradiusPrimaryAuthHostread-writecurrentPrimary Radius Authentication Host
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.3ScalarradiusSecondaryAuthHostread-writecurrentSecondary Radius Authentication Host
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.4ScalarradiusAuthenticationPortread-writecurrentThe port that the RADIUS host listens to for authentication requests. The default port is 1812.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.5ScalarradiusAccountingread-writecurrentRadius Accounting
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.6ScalarradiusPrimaryAcctHostread-writecurrentName of the primary RADIUS authentication host.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.7ScalarradiusSecondaryAcctHostread-writecurrentName of the secondary RADIUS authentication host.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.8ScalarradiusAccountingPortread-writecurrentThe port that the RADIUS host listens to for accounting requests. The default port is 1813.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.9ScalarradiusAcctAuthread-writecurrentRadius Accounting Authenticator
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.10ScalarradiusRetryLimitread-writecurrentThe number of times the management module tries to connect to the RADIUS server before erroring out. Valid values are 0-255. The default is 5.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.11ScalarradiusTimeoutread-writecurrentThe time, in seconds, that the management module waits to receive a reply after sending out a request to a RADIUS accounting or authentication host. If no repl…
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.12ScalarradiusNasIdentifierread-writecurrentThe NAS identifier name. To delete this , set this field to blank.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.13ScalarradiusNasIpAddressread-writecurrentWhen on, the NAS Identifier obtains ipv4 address automatically. Default is on.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.14ScalarradiusNasSpecifyIpAddressread-writecurrentSpecify the unique IPv4 address that NAS Identifier will use
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.15ScalarradiusNasIpv6Addressread-writecurrentWhen on, the NAS Identifier obtains ipv6 address automatically. Default is on.
1.3.6.1.4.1.1966.21.1.1.1.2.4.8.16ScalarradiusNasSpecifyIpv6Addressread-writecurrentSpecify the unique IPv6 address that NAS Identifier will use
1.3.6.1.4.1.1966.21.1.1.1.2.4.9NodekerberosGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.9.1ScalarkerberosStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.9.2ScalarkerberosRealmread-writecurrentThe Kerberos realm is the Kerberos host domain name, in upper-case letters.
1.3.6.1.4.1.1966.21.1.1.1.2.4.9.3ScalarkerberosDomainread-writecurrentThe name of a host running the KDC (Key Distribution Center) for the specified realm. The host name that you specify must either be defined in the management m…
1.3.6.1.4.1.1966.21.1.1.1.2.4.9.4ScalarkerberosPortread-writecurrentThe port that the Kerberos server listens to for authentication requests. If no port is specified, the default port 88 is used.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10NodeldapGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.1ScalarldapStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.2ScalarldapHostread-writecurrentThe name or IP address of the LDAP host. If you use a host name, that host must either have been defined in the management module's Host Table before the last …
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.3ScalarldapPortread-writecurrentThe port that the LDAP host listens to for authentication requests. The default port is 389.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.4ScalarldapBaseread-writecurrentThe domain component (dc) that is the starting point for the search for user authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.5ScalarldapEnableTLSread-writecurrentEnables/disables the Transport Layer Security (TLS) with the LDAP host.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.6ScalarldapTLSPortread-writecurrentSpecify the port number that LDAP will use for TLS. The default is port 636.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.7ScalarldapUIDread-writecurrentLDAP user attribute. e.g. uid (OpenLDAP) sAMAccountName (Active Directory) The default is 'uid'.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.8ScalarldapPasswordEncryptionread-writecurrentLDAP password encryption method.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.9ScalarldapClientAuthread-writecurrentLDAP client authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.10ScalarldapClientNameread-writecurrentLDAP client name. Identifies the unit to the LDAP server, when client authentication is .
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.11ScalarldapClientAppendBaseread-writecurrentAppend base to LDAP client name.
1.3.6.1.4.1.1966.21.1.1.1.2.4.10.12ScalarldapClientPasswordread-writecurrentLDAP client password. Identifies the unit to the LDAP server, when client authentication is .
1.3.6.1.4.1.1966.21.1.1.1.2.4.11NodetacacsGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.1ScalartacacsStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.2ScalartacacsPrimaryHostread-writecurrentThe primary TACACS+ host that is used for authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.3ScalartacacsSecondaryHostread-writecurrentThe secondary TACACS+ host that is used for authentication, should the primary TACACS+ host fail to respond.
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.4ScalartacacsPortread-writecurrentThe port number that TACACS+ listens to for authentication requests. The default port number is 49.
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.5ScalartacacsAccountingread-writecurrentEnable/Disable TACACS+ accounting
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.6ScalartacacsAccountingPrimaryHostread-writecurrentThe primary TACACS+ accounting host that is used for.
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.7ScalartacacsAccountingSecondaryHostread-writecurrentThe secondary TACACS+ accounting host that is used for , should the primary TACACS+ host fail to respond.
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.8ScalartacacsAccountingPortread-writecurrentThe port number that TACACS+ listens to for accounting requests. The default port number is 49.
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.9ScalartacacsAuthorizationread-writecurrentEnable/Disable TACACS+ authorization
1.3.6.1.4.1.1966.21.1.1.1.2.4.11.10ScalartacacsAlternateServiceNamesread-writecurrentEnable alternate service names for TACACS+.
1.3.6.1.4.1.1966.21.1.1.1.2.4.12NodesecuridGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.12.1ScalarsecuridStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.12.2ScalarsecuridMasterHostread-writecurrentThe first SecurID server that is tried for user authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.4.12.3ScalarsecuridSlaveHostread-writecurrentIf the first SecurID server does not respond to an authentication request, this is the next SecurID server that is tried for user authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.4.12.4ScalarsecuridPortread-writecurrentThe port number that SecurID listens to for authentication requests. The default port number is 5500.
1.3.6.1.4.1.1966.21.1.1.1.2.4.12.5ScalarsecuridTyperead-writecurrentYou can specify either SDI or DES encryption for SecurID server communication. The default is SDI encryption.
1.3.6.1.4.1.1966.21.1.1.1.2.4.12.6ScalarsecuridLegacyread-writecurrentIf you are running SecurID 3.x or 4.x, you need to run in Legacy Mode. If you are running SecurID 5.x or above, do not select Legacy Mode.
1.3.6.1.4.1.1966.21.1.1.1.2.4.13NodenisGroup
1.3.6.1.4.1.1966.21.1.1.1.2.4.13.1ScalarnisStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.4.13.2ScalarnisDomainread-writecurrentThe NIS domain name.
1.3.6.1.4.1.1966.21.1.1.1.2.4.13.3ScalarnisPrimaryHostread-writecurrentThe primary NIS host that is used for authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.4.13.4ScalarnisSecondaryHostread-writecurrentThe secondary NIS host that is used for authentication, should the primary NIS host fail to respond.
1.3.6.1.4.1.1966.21.1.1.1.2.5NodemgtDateTimeGroup
1.3.6.1.4.1.1966.21.1.1.1.2.5.1ScalarmgtDateTimeStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.5.2ScalarsystemDateread-writecurrentThe system date. Format dd/mm/yyyy.
1.3.6.1.4.1.1966.21.1.1.1.2.5.3ScalarsystemTimeread-writecurrentThe system time (local time). Format hh:mm:ss.
1.3.6.1.4.1.1966.21.1.1.1.2.5.4ScalarsystemDateTimeAndOffsetread-onlycurrentThis read only object identifies the current system date, time and GMT offset. The date and time will be displayed in the regional time format configured.
1.3.6.1.4.1.1966.21.1.1.1.2.5.5ScalartimeZoneListEnableread-writecurrentWhen the time zone list is enabled then the time zone being use is the one selected form the predefined list of time zones. If not enabled then the customTimeZ…
1.3.6.1.4.1.1966.21.1.1.1.2.5.6ScalarselectionFromTimeZoneListread-writecurrentThis object identifies the predefined time zone selected. This time zone will be used if timeZoneListEnable object is set to yes. configured.
1.3.6.1.4.1.1966.21.1.1.1.2.5.7ScalartimeZoneAdjustForDSTread-writecurrentThis object identifies if the time will be adjusted for DST (Daylight Savings Time) or not.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8NodecustomTimeZoneGroup
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.1ScalarcustomTimeZoneStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.2ScalartimeZoneNameread-writecurrentThe name of the time zone when using standard time.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.3ScalartimeOffsetread-writecurrentThe offset of summer time from standard time in minutes.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.4ScalartimeSummerNameread-writecurrentThe name of the time zone when using summer time.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.5ScalartimeSummerOffsetread-writecurrentThe offset of summer time from standard time in minutes.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.6ScalartimeSummerModeread-writecurrentYou can configure the summer time to take effect: None-No summer time change. Fixed-The summer time change goes into effect at the specified time every year. F…
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.7ScalartimeSummerRecStartMonthread-writecurrentThe recurring summer time start month.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.8ScalartimeSummerRecStartWeekread-writecurrentThe recurring summer time start week.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.9ScalartimeSummerRecStartDayread-writecurrentThe recurring summer time start day.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.10ScalartimeSummerRecStartHourread-writecurrentThe recurring summer time start hour.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.11ScalartimeSummerRecStartMinread-writecurrentThe recurring summer time start minute
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.12ScalartimeSummerRecEndMonthread-writecurrentThe recurring summer time end month.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.13ScalartimeSummerRecEndWeekread-writecurrentThe recurring summer time end week.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.14ScalartimeSummerRecEndDayread-writecurrentThe recurring summer time end day.
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.15ScalartimeSummerRecEndHourread-writecurrentThe recurring summer time end hour
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.16ScalartimeSummerRecEndMinread-writecurrentThe recurring summer time end minute
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.17ScalartimeSummerFixStartMonthread-writecurrentThe fixed summer time start month
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.18ScalartimeSummerFixStartDayread-writecurrentThe fixed summer time start day
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.19ScalartimeSummerFixStartHourread-writecurrentThe fixed summer time start hour
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.20ScalartimeSummerFixStartMinuteread-writecurrentThe fixed summer time start minute
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.21ScalartimeSummerFixEndMonthread-writecurrentThe fixed summer time End month
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.22ScalartimeSummerFixEndDayread-writecurrentThe fixed summer time End day
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.23ScalartimeSummerFixEndHourread-writecurrentThe fixed summer time End hour
1.3.6.1.4.1.1966.21.1.1.1.2.5.8.24ScalartimeSummerFixEndMinuteread-writecurrentThe fixed summer time End minute
1.3.6.1.4.1.1966.21.1.1.1.2.5.9NodenetworkTimeGroup
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.1ScalartimeStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.2ScalartimeSntpModeread-writecurrentThe SNTP client mode. Valid modes are Disabled, Unicast, Multicast or Anycast
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.3ScalartimeSntpVersionread-writecurrentThe sntp client version.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.4ScalartimeSntpHost1read-writecurrentThe first remote SNTP host name that the device server communicates with.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.5ScalartimeSntpHost2read-writecurrentThe second remote SNTP host name that the device server communicates with.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6NodesntpStatGroup
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.1ScalarsntpStatAddressread-onlycurrentThe address of the remote SNMP host that updated the time.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.2ScalarsntpStatLastUpdateread-onlycurrentThe time of the last update.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.3ScalarsntpStatLeapIndicatorread-onlycurrentThe leap year indicator.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.4ScalarsntpStatVersionread-onlycurrentThe SNTP version.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.5ScalarsntpStatModeread-onlycurrentThe current SNTP mode
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.6ScalarsntpStatStratumread-onlycurrentThe SNTP stratum.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.7ScalarsntpStatRefIdread-onlycurrentThe SNTP reference ID.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.6.8ScalarsntpStatOffsetread-onlycurrentThe SNTP offset
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.7ScalartimeSntpServerAuthenticationread-writecurrentSpecifies whether to authenticate with the ntp time server.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.8ScalartimeSntpKeyIDread-writecurrentSpecifies the key ID to use for host 1 during server authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.5.9.9ScalartimeSntpKeyID2read-writecurrentSpecifies the key ID to use for host 2 during server authentication.
1.3.6.1.4.1.1966.21.1.1.1.2.6NodemgtFilesGroup
1.3.6.1.4.1.1966.21.1.1.1.2.6.1NodemgtBootFilesGroup
1.3.6.1.4.1.1966.21.1.1.1.2.6.1.1ScalarbootFileStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.6.1.2ScalarfileFirmwareHostread-writecurrentThe host name or IP address of the server that contains the firmware file. If you use a host name, it must exist in the management module's host table or be re…
1.3.6.1.4.1.1966.21.1.1.1.2.6.1.3ScalarfileFirmwareNameread-writecurrentThe path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the update software for the management module…
1.3.6.1.4.1.1966.21.1.1.1.2.6.1.4ScalarfileConfigurationHostread-writecurrentThe host name or IP address of the server that contains the configuration file. If you use a host name, it must exist in the management module's host table or …
1.3.6.1.4.1.1966.21.1.1.1.2.6.1.5ScalarfileConfigurationNameread-writecurrentThe path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the new configuration file for the Device Ser…
1.3.6.1.4.1.1966.21.1.1.1.2.6.2NodemgtfirmwareUpdatesGroup
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.1ScalarfirmwareUpdateStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.2ScalarfirmwareUpdateAutoread-writecurrentEnable automatic updates of installed media converter modules from firmware bundle on management module..
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.3ScalarfirmwareUpdateBundleVersionCm100read-onlycurrentThis object identifies the bundled firmware version for CM-100 modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.4ScalarfirmwareUpdateBundleVersionCm110read-onlycurrentThis object identifies the bundled firmware version for CM-110 modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.5ScalarfirmwareUpdateBundleVersionCm1000OrCm1000Sfpread-onlycurrentThis object identifies the bundled firmware version for CM-1000 or CM-1000-SFP modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.6ScalarfirmwareUpdateBundleVersionCm1110read-onlycurrentThis object identifies the bundled firmware version for CM-1110 modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.7ScalarfirmwareUpdateBundleVersionCm1110Sfpread-onlycurrentThis object identifies the bundled firmware version for CM-1110-SFP modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.8ScalarfirmwareUpdateBundleVersionCm100mmread-onlycurrentThis object identifies the bundled firmware version for CM-100MM modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.9ScalarfirmwareUpdateBundleVersionCm1000mmread-onlycurrentThis object identifies the bundled firmware version for CM-1000MM modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.2.10ScalarfirmwareUpdateBundleVersionCm10gread-onlycurrentThis object identifies the bundled firmware version for CM-10G modules.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3TablenettxfrTablenot-accessiblecurrentTable of snmp file transfer sessions.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1RownettxfrEntrynot-accessiblecurrentEntries of the table, each relating to a SNMP file transfer session.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.1ColumnnettxfrSessionIDnot-accessiblecurrentThis indicates if the net transfer is to be loaded to the management module or saved from the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.2ColumnnettxfrStatusread-writecurrentThis field indicates the status of the nettxfr process. A value of start(1) should be written to this field to start the nettxfr process with the specified par…
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.3ColumnnettxfrDirectionread-writecurrentThis indicates if the net transfer is to be loaded to the management module or saved from the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.4ColumnnettxfrFileTyperead-writecurrentThis indicates the type of file to be transfered to/from the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.5ColumnnettxfrFileHostread-writecurrentThe host name or IP address of the server that contains the file to be transfered to/from the management module.. If you use a host name, it must exist in the …
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.6ColumnnettxfrFileNameread-writecurrentThe path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the file to be transfered to/from the managem…
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.7ColumnnettxfrMCSlotNumberread-writecurrentSpecifies the slot number of the Media Converter Module to which the firmware will be transfered.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.8ColumnnettxfrUserNameread-writecurrentSpecifies the user login name who owns the ssh public key that is to be transfered to the management module.
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.9ColumnnettxfrSSHKeyTyperead-writecurrentSpecifies the authentication method used by the ssh-server public key that is to be transfered to/from the management module
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.10ColumnnettxfrSSLTyperead-writecurrentSpecifies the type of SSL file to be transfered to the management module. These files are needed if you are using the secure version of the WebManager (HTTPS),…
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.11ColumnnettxfrSessionInUseread-writecurrentSpecifies whether this net transfer session entry is in use. If a manager tries to write a 1 to this field and the session is already in use, then an error is …
1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.12ColumnnettxfrTftpPortread-writecurrentSpecifies a UDP port number for the TFTP host server. Default is 69.
1.3.6.1.4.1.1966.21.1.1.1.2.7NodemgtAdminGroup
1.3.6.1.4.1.1966.21.1.1.1.2.7.1ScalaradminFunctionread-writecurrentPerform a specific function on the management module. If you want to save all the changes that have been submitted to the management module, you need to expand…
1.3.6.1.4.1.1966.21.1.1.1.2.7.2ScalaradminLastFunctionread-onlycurrentThe last function requested
1.3.6.1.4.1.1966.21.1.1.1.2.7.3ScalaradminStatusread-onlycurrentThe status of the last function performed.
1.3.6.1.4.1.1966.21.1.1.1.2.7.4ScalaradminbootReasonread-onlycurrentThe reason(s) why the management module last rebooted.
1.3.6.1.4.1.1966.21.1.1.1.2.7.5ScalaradminDiagFileAvailableread-onlycurrentThis object indicates that a diagnostic file is available.
1.3.6.1.4.1.1966.21.1.1.1.2.8NodemgtDisplayFormatGroup
1.3.6.1.4.1.1966.21.1.1.1.2.8.1ScalardisplayFormatStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.8.2ScalarcfgTemperatureUnitsread-writecurrentThis object identifies the units to display any internally measured temperature. The units can be Celsius or Fahrenheit.
1.3.6.1.4.1.1966.21.1.1.1.2.8.3ScalarcfgSfpPowerUnitsread-writecurrentThis object identifies the units to display any SFP DMI internally measured transmit/receive power. The units can be milliwatts (mW) or Decibel milliwatts (dBm…
1.3.6.1.4.1.1966.21.1.1.1.2.8.4ScalarcfgTimeFormatread-writecurrentThis object identifies the format to display the time.
1.3.6.1.4.1.1966.21.1.1.1.2.8.5ScalarcfgDateFormatread-writecurrentThis object identifies the format to display date.
1.3.6.1.4.1.1966.21.1.1.1.2.9NodemgtChassisCfgGroup
1.3.6.1.4.1.1966.21.1.1.1.2.9.1TablemgtChassisSlotPowerScheduleTablenot-accessiblecurrentTable of power schedule configuration for chassis slots. (Not applicable to 2-slot chassis.)
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1RowmgtChassisSlotPowerScheduleEntrynot-accessiblecurrentEntries of the table, each relating to a separate slot in a chassis.
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.2ColumnpowerSchedSlotIndexnot-accessiblecurrentThis object identifies the chassis slot number.
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.3ColumnpowerSchedDayOfWeeknot-accessiblecurrentThis object identifies the day of the week.
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.4ColumnpowerSchedConifgStatusread-writecurrentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indic…
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.5ColumnpowerSchedOnHourread-writecurrentThis object identifies the hour (0-23) of the day to schedule a power on of the chassis slot
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.6ColumnpowerSchedOnMinuteread-writecurrentThis object identifies the minute (0-59) of the hour to schedule a power on of the chassis slot
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.7ColumnpowerSchedOffHourread-writecurrentThis object identifies the hour (0-23) of the day to schedule a power off of the chassis slot
1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.8ColumnpowerSchedOffMinuteread-writecurrentThis object identifies the minute (0-59) of the hour to schedule a power off of the chassis slot
1.3.6.1.4.1.1966.21.1.1.2NodemcrMGTMIBConformance
1.3.6.1.4.1.1966.21.1.1.2.1NodemcrMGTMIBCompliances
1.3.6.1.4.1.1966.21.1.1.2.1.1CompliancemcrMGTMIBCompliancecurrentThe compliance statement for mcrMGT which implement the Perle Managed Media Converters MIB.
1.3.6.1.4.1.1966.21.1.1.2.2NodemcrMGTMIBGroups
1.3.6.1.4.1.1966.21.1.1.2.2.1GroupmcrMGTMIBChassisGroupcurrentThe group of objects for identifying and determining the configuration and current timeliness values of the Perle Managed Media Converters chassis.
1.3.6.1.4.1.1966.21.1.1.2.2.2GroupmcrMGTMIBMediaGroupcurrentThe group of objects for identifying and determining the configuration and current timeliness values of the Perle Managed Media Converters media converter modu…
1.3.6.1.4.1.1966.21.1.1.2.2.3GroupmcrMGTMIBMgtGroupcurrentThe group of objects for identifying and determining the configuration and current timeliness values of the Perle Managed Media Converters media converter modu…
1.3.6.1.4.1.1966.21.1.1.2.2.4GroupmcrMGTMIBNotificationsGroupcurrentThe group of notifications (traps) which is implemented for the Perle Managed Media Converters.
Type Definitions
NameSyntaxStatusDescription
AlertSeverityLevelINTEGER { systemLevelFault(0), moduleLevelFault(1), persistantError(2), oneTimeError(3), significantEvent(4), normalOperation(5) }currentThe alert severity level of an event.
ContainerStatusINTEGER { active(1), modified(2), applyChanges(4), discardChanges(6) }currentWhen you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…
EnableDisableValueINTEGER { notApplicable(-1), disable(0), enable(1) }currentRepresents an ON or OFF value.
GenericTableIndexUnsigned32 (1..2147483647)currentAn arbitrary value that uniquely identifies the entity. The value should be a small, positive integer. Index values for different entities are not necessarily contiguous.
Ipv4v6AddressOCTET STRING (SIZE (0..255))currentAn IPv4 or IPv6 address
OnOffValueINTEGER { notApplicable(-1), off(0), on(1) }currentRepresents an ON or OFF value.
SlotNumberUnsigned32(1..2147483647)currentChassis slot number. Valid values are 1 to the highest slot number the chassis supports. For example a MCR-1900 chassis the valid slot numbers are 1 to 19
YesNoValueINTEGER { notApplicable(-1), no(0), yes(1) }currentRepresents a YES or NO value.
MIB Viewer