MIB Viewer

PIM-SM-MIB

84 objects
The Structure of PIM SM Information for the proprietary enterprise.
OIDNameAccessStatusDescription
1.3.6.1.4.1.171.12.52IdentityswPimSmMIBThe Structure of PIM SM Information for the proprietary enterprise.
1.3.6.1.4.1.171.12.52.1NodeswPimSmCtrl
1.3.6.1.4.1.171.12.52.1.1ScalarswPimSmGlobalStateread-writecurrentUsed to control PIM-SM state.
1.3.6.1.4.1.171.12.52.2NodeswPimSmInfo
1.3.6.1.4.1.171.12.52.2.1ScalarswPimRegisterProbeTimeread-writecurrentUsed to set a time to send a probe message from the Designated Router (DR) to the Rendezvous Point (RP) before the Register Suppression time expires. If a Regi…
1.3.6.1.4.1.171.12.52.2.2ScalarswPimRegisterSuppressionTimeread-writecurrentThe time interval between receiving a Register-Stop message and restarting the process of sending registered messages again. A lower value represents an increa…
1.3.6.1.4.1.171.12.52.2.3TableswPimInfoTablenot-accessiblecurrentThe PIM Information Table contains PIM related information, such as DR priority.
1.3.6.1.4.1.171.12.52.2.3.1RowswPimInfoEntrynot-accessiblecurrentAn entry in the PIM Information Table.
1.3.6.1.4.1.171.12.52.2.3.1.1ColumnswPimInfoInterfacenot-accessiblecurrentThe ifIndex value of this PIM interface.
1.3.6.1.4.1.171.12.52.2.3.1.2ColumnswPimInfoAddressread-onlycurrentThe IP address of the PIM interface.
1.3.6.1.4.1.171.12.52.2.3.1.3ColumnswPimInfoNetMaskread-onlycurrentThe network mask for the IP address of the PIM interface.
1.3.6.1.4.1.171.12.52.2.3.1.4ColumnswPimInfoDesignatedRouterread-onlycurrentThe Designated Router on this PIM interface. For point-to-point interfaces, this object has the value 0.0.0.0.
1.3.6.1.4.1.171.12.52.2.3.1.5ColumnswPimInfoHelloIntervalread-writecurrentThe frequency at which PIM Hello messages are transmitted on this interface.
1.3.6.1.4.1.171.12.52.2.3.1.6ColumnswPimInfoJoinPruneIntervalread-writecurrentThe frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
1.3.6.1.4.1.171.12.52.2.3.1.7ColumnswPimInfoDRPriorityread-writecurrentThe DR Priority sets the priority of an IP interface to become the Designated router for the multiple access network. A numerically larger priority is always p…
1.3.6.1.4.1.171.12.52.2.3.1.8ColumnswPimInfoModeread-writecurrentThe configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
1.3.6.1.4.1.171.12.52.2.3.1.9ColumnswPimInfoStateread-writecurrentThe configured state of this PIM interface.
1.3.6.1.4.1.171.12.52.2.3.1.10ColumnswPimInfoPassiveModeread-writecurrentSpecifies the interface is operates in PIM passive mode or not. When enabling the passive mode, the interface will neither send PIM messages nor accept PIM mes…
1.3.6.1.4.1.171.12.52.3NodeswPimSmMgmt
1.3.6.1.4.1.171.12.52.3.1NodeswPimCbsrInfoMgmt
1.3.6.1.4.1.171.12.52.3.1.1ScalarswpimCbsrBootStrapPeriodread-writecurrentThe time interval, in seconds, for Boot Strap Messages originating from the elected BSR.
1.3.6.1.4.1.171.12.52.3.1.2ScalarswPimCbsrHashMaskLenread-writecurrentThe length (in bits) of the mask to use for the hash function (This hash algorithm will be used to determine which candidate RP will be the RP for the PIM-SM n…
1.3.6.1.4.1.171.12.52.3.1.3TableswPimCbsrTablenot-accessiblecurrentThe PIM CBSR Table contains information related to the candidate bootstrap router, such as interface name, IP address and priority.
1.3.6.1.4.1.171.12.52.3.1.3.1RowswPimCbsrEntrynot-accessiblecurrentAn entry in the PIM CBSR Table.
1.3.6.1.4.1.171.12.52.3.1.3.1.1ColumnswPimCbsrInterfacenot-accessiblecurrentThe ifIndex value of this PIM interface.
1.3.6.1.4.1.171.12.52.3.1.3.1.2ColumnswPimCbsrIpAddressread-onlycurrentThe IP address of this PIM interface.
1.3.6.1.4.1.171.12.52.3.1.3.1.3ColumnswPimCbsrSubnetMaskread-onlycurrentThe IP netmask for this PIM interface.
1.3.6.1.4.1.171.12.52.3.1.3.1.4ColumnswPimCbsrPriorityread-writecurrentThe preference value for the local candidate interface to become a bootstrap router. A value of -1 is used to indicate that the local candidate interface canno…
1.3.6.1.4.1.171.12.52.3.2NodeswPimCandidateRPMgmt
1.3.6.1.4.1.171.12.52.3.2.1ScalarswPimCandidateRPHoldtimeread-writecurrentUsed to set the time CRP advertisements remain valid on the PIM-SM enabled network. If the advertisements, set here, aren't received by the BSR within this tim…
1.3.6.1.4.1.171.12.52.3.2.2ScalarswPimCandidateRPPriorityread-writecurrentThis value determines the priority required for a CRP to become the RP for the distribution tree. A lower value denotes a higher priority. If the priority valu…
1.3.6.1.4.1.171.12.52.3.2.3ScalarswPimCandidateRPWildcardPrefixCntread-writecurrentThe number of encoded group addresses included in the message; indicating the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0' implies a p…
1.3.6.1.4.1.171.12.52.3.2.4TableswPimCandidateRPTablenot-accessiblecurrentThe (conceptual) table listing the IP multicast groups that the local router will use to advertise itself as a Candidate-RP when the pimComponentCRPHoldTime ha…
1.3.6.1.4.1.171.12.52.3.2.4.1RowswPimCandidateRPEntrynot-accessiblecurrentAn entry (conceptual row) in the pimCandidateRPTable.
1.3.6.1.4.1.171.12.52.3.2.4.1.1ColumnswPimCandidateRPGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with pimCandidateRPGroupMask, identifies a group prefix that the local router will use to advertise itself …
1.3.6.1.4.1.171.12.52.3.2.4.1.2ColumnswPimCandidateRPGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with pimCandidateRPGroupMask, identifies a group prefix that the local router will use to advertise itsel…
1.3.6.1.4.1.171.12.52.3.2.4.1.3ColumnswPimCandidateRPInterfaceread-createcurrentThe name of the interface which will be advertised as a Candidate-RP.
1.3.6.1.4.1.171.12.52.3.2.4.1.4ColumnswPimCandidateRPRowStatusread-createcurrentThe status of this row,displaying the new entries that have been created, or the old entries that have been deleted from this table.
1.3.6.1.4.1.171.12.52.3.3TableswPimNeighborTablenot-accessiblecurrentThe (conceptual) table listing the router's PIM neighbors.
1.3.6.1.4.1.171.12.52.3.3.1RowswPimNeighborEntrynot-accessiblecurrentAn entry (conceptual row) in the swPimNeighborTable.
1.3.6.1.4.1.171.12.52.3.3.1.1ColumnswPimNeighborAddressnot-accessiblecurrentThe IP address of the PIM neighbor that is used to find PIM neighbor information.
1.3.6.1.4.1.171.12.52.3.3.1.2ColumnswPimNeighborIfIndexread-onlycurrentThe value of the ifIndex for the interface used to find PIM neighbor information.
1.3.6.1.4.1.171.12.52.3.3.1.3ColumnswPimNeighborExpiryTimeread-onlycurrentThe minimum time remaining before this PIM neighbor ages out.
1.3.6.1.4.1.171.12.52.3.4NodeswPimSptMgmt
1.3.6.1.4.1.171.12.52.3.4.1ScalarswPimLastHopSptThresholdread-writecurrentSpecifies a last hop router threshold.65536 means 'infinity'.
1.3.6.1.4.1.171.12.52.3.4.2ScalarswPimRPSptThresholdread-writecurrentSpecifies an RP threshold.65536 means 'infinity'.
1.3.6.1.4.1.171.12.52.3.4.3ScalarswPimLastHopSptSwitchoverread-writecurrentUsed by the last hop router to decide whether to receive the multicast data from the shared tree or switch over to the shortest path tree. When the switchover …
1.3.6.1.4.1.171.12.52.3.5TableswPimRegChksumIncDataTablenot-accessiblecurrentThe PIM Register Checksum Including Data Table contains the PIM register checksum including data information, such as the RP address and state.
1.3.6.1.4.1.171.12.52.3.5.1RowswPimRegChksumIncDataEntrynot-accessiblecurrentAn entry in the PIM Register Checksum Including Data Table.
1.3.6.1.4.1.171.12.52.3.5.1.1ColumnswL3SwPimRegChksumIncDataRpAddrnot-accessiblecurrentSpecifies the RP address.
1.3.6.1.4.1.171.12.52.3.5.1.2ColumnswL3SwPimRegChksumIncDataStateread-createcurrentThe state of the register checksum, including data for RPs.
1.3.6.1.4.1.171.12.52.3.6TableswPimStaticRPTablenot-accessiblecurrentThe PIM Static RP Table contains the PIM static RP related information, such as the group address, the group mask, the RP address and the RP row status.
1.3.6.1.4.1.171.12.52.3.6.1RowswPimStaticRPEntrynot-accessiblecurrentAn entry in the PIM Static RP Table.
1.3.6.1.4.1.171.12.52.3.6.1.1ColumnswPimStaticRPGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with swPimStaticRPGroupMask, identifies a group prefix that the local router will use to advertise itself a…
1.3.6.1.4.1.171.12.52.3.6.1.2ColumnswPimStaticRPGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with swPimStaticRPGroupAddress, identifies a group prefix that the local router will use to advertise its…
1.3.6.1.4.1.171.12.52.3.6.1.3ColumnswPimStaticRPAddressnot-accessiblecurrentThe (unicast) address of the interface which will be advertised as a static RP.
1.3.6.1.4.1.171.12.52.3.6.1.4ColumnswPimStaticRPRowStatusread-createcurrentThe status of this row, indicating which new entries will be created, or which old entries will be deleted from this row table.
1.3.6.1.4.1.171.12.52.3.7TableswPimIpMRouteTablenot-accessiblecurrentThe (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB.
1.3.6.1.4.1.171.12.52.3.7.1RowswPimIpMRouteEntrynot-accessiblecurrentAn entry (conceptual row) in the pimIpMRouteTable. There is one entry, for each entry in the ipMRouteTable, whose incoming interface is running PIM.
1.3.6.1.4.1.171.12.52.3.7.1.1ColumnswPimIpMRouteGroupnot-accessiblecurrentThe IP multicast group address for an entry containing multicast routing information.
1.3.6.1.4.1.171.12.52.3.7.1.2ColumnswPimIpMRouteSourcenot-accessiblecurrentThe network address which, when combined with the corresponding value of ipMRouteSourceMask, identifies the source of an entry that contains multicast routing …
1.3.6.1.4.1.171.12.52.3.7.1.3ColumnswPimIpMRouteSourceMasknot-accessiblecurrentThe network mask which, when combined with the corresponding value of ipMRouteSource, identifies the source of an entry that contains multicast routing informa…
1.3.6.1.4.1.171.12.52.3.7.1.4ColumnswPimIpMRouteUpstreamAssertTimerread-onlycurrentThe time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense …
1.3.6.1.4.1.171.12.52.3.7.1.5ColumnswPimIpMRouteAssertMetricread-onlycurrentThe metric advertised by the assert winner on the upstream interface, or 0 if no such assert is received.
1.3.6.1.4.1.171.12.52.3.7.1.6ColumnswPimIpMRouteAssertMetricPrefread-onlycurrentThe preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.
1.3.6.1.4.1.171.12.52.3.7.1.7ColumnswPimIpMRouteAssertRPTBitread-onlycurrentThe value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.
1.3.6.1.4.1.171.12.52.3.7.1.8ColumnswPimIpMRouteFlagsread-onlycurrentThis object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits.
1.3.6.1.4.1.171.12.52.3.7.1.9ColumnswPimIpMRouteTyperead-onlycurrentThis object describes the PIM-specific type as related to a multicast state entry.
1.3.6.1.4.1.171.12.52.3.8NodeswPimRPSetMgmt
1.3.6.1.4.1.171.12.52.3.8.1ScalarswPimRPSetBootstrapRouterread-onlycurrentSpecifies a Bootstrap Router.
1.3.6.1.4.1.171.12.52.3.8.2TableswPimRPSetTablenot-accessiblecurrentThe (conceptual) table lists PIM information for the candidate Rendezvous Points (CRPs) for IP multicast groups. When the local router is the BSR, this informa…
1.3.6.1.4.1.171.12.52.3.8.2.1RowswPimRPSetEntrynot-accessiblecurrentAn entry (conceptual row) in the pimRPSetTable.
1.3.6.1.4.1.171.12.52.3.8.2.1.1ColumnswPimRPSetComponentnot-accessiblecurrentA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.171.12.52.3.8.2.1.2ColumnswPimRPSetGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with pimRPSetGroupMask, gives the group a prefix. This prefix will determine for which entry CRP informatio…
1.3.6.1.4.1.171.12.52.3.8.2.1.3ColumnswPimRPSetGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group a prefix to determine which entry contains the CRP information…
1.3.6.1.4.1.171.12.52.3.8.2.1.4ColumnswPimRPSetAddressnot-accessiblecurrentThe IP address of the Candidate-RP.
1.3.6.1.4.1.171.12.52.3.8.2.1.5ColumnswPimRPSetTyperead-onlycurrentThe type of Candidate-RP. The value of 'dynamic' indicates the RP address is created as a result of running the PIM Bootstrap Router (BSR) mechanism.
1.3.6.1.4.1.171.12.52.3.8.2.1.6ColumnswPimRPSetHoldTimeread-onlycurrentThe amount of time (in seconds) the RP is valid.
1.3.6.1.4.1.171.12.52.3.8.2.1.7ColumnswPimRPSetUpTimeread-onlycurrentThe time since the RP became active.
1.3.6.1.4.1.171.12.52.3.8.2.1.8ColumnswPimRPSetExpiryTimeread-onlycurrentThe time remaining before the RP expires. If the object swPimRPSetType value is 'static', the value of this object is zero.
1.3.6.1.4.1.171.12.52.4NodeswPimSSmMgmt
1.3.6.1.4.1.171.12.52.4.1ScalarswPimSSmGlobalStateread-writecurrentThe object indicates the state of PIM-SSM. The PIM-SSM function will take active only when SSM service model and PIM-SM state both enabled.
1.3.6.1.4.1.171.12.52.4.2ScalarswPimSSmGroupAddressread-writecurrentThis is the SSM multicast group range, by default the SSM group range is 232.0.0.0/8. To modify the group range, assign group IP address on this object and net…
1.3.6.1.4.1.171.12.52.4.3ScalarswPimSSmGroupMaskread-writecurrentThis is the SSM multicast group IP net mask, by default the SSM group IP net mask is 255.0.0.0.