PIM-STD-MIB
254 objects
The MIB module for management of PIM routers. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 5060; see the RFC itself for full legal notices.
Imported Objects
| IANA-RTPROTO-MIB | IANAipRouteProtocol |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetVersion |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.157 | IdentitypimStdMIB | The MIB module for management of PIM routers. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 5060; see the RFC itself for … | ||
| 1.3.6.1.2.1.157.0 | NodepimNotifications | |||
| 1.3.6.1.2.1.157.0.1 | NotificationpimNeighborLoss | current | A pimNeighborLoss notification signifies the loss of an adjacency with a neighbor. This notification should be generated when the neighbor timer expires, and t… | |
| 1.3.6.1.2.1.157.0.2 | NotificationpimInvalidRegister | current | A pimInvalidRegister notification signifies that an invalid PIM Register message was received by this device. This notification is generated whenever the count… | |
| 1.3.6.1.2.1.157.0.3 | NotificationpimInvalidJoinPrune | current | A pimInvalidJoinPrune notification signifies that an invalid PIM Join/Prune message was received by this device. This notification is generated whenever the co… | |
| 1.3.6.1.2.1.157.0.4 | NotificationpimRPMappingChange | current | A pimRPMappingChange notification signifies a change to the active RP mapping on this device. This notification is generated whenever the counter pimRPMappingC… | |
| 1.3.6.1.2.1.157.0.5 | NotificationpimInterfaceElection | current | A pimInterfaceElection notification signifies that a new DR or DF has been elected on a network. This notification is generated whenever the counter pimInterfa… | |
| 1.3.6.1.2.1.157.1 | Nodepim | |||
| 1.3.6.1.2.1.157.1.1 | TablepimInterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM interfaces. PIM is enabled on all interfaces listed in this table. |
| 1.3.6.1.2.1.157.1.1.1 | RowpimInterfaceEntry | not-accessible | current | An entry (conceptual row) in the pimInterfaceTable. This entry is preserved on agent restart. |
| 1.3.6.1.2.1.157.1.1.1.1 | ColumnpimInterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.2.1.157.1.1.1.2 | ColumnpimInterfaceIPVersion | not-accessible | current | The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is consi… |
| 1.3.6.1.2.1.157.1.1.1.3 | ColumnpimInterfaceAddressType | read-only | current | The address type of this PIM interface. |
| 1.3.6.1.2.1.157.1.1.1.4 | ColumnpimInterfaceAddress | read-only | current | The primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. |
| 1.3.6.1.2.1.157.1.1.1.5 | ColumnpimInterfaceGenerationIDValue | read-only | current | The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface. |
| 1.3.6.1.2.1.157.1.1.1.6 | ColumnpimInterfaceDR | read-only | current | The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. |
| 1.3.6.1.2.1.157.1.1.1.7 | ColumnpimInterfaceDRPriority | read-create | current | The Designated Router Priority value inserted into the DR Priority option in PIM Hello messages transmitted on this interface. Numerically higher values for th… |
| 1.3.6.1.2.1.157.1.1.1.8 | ColumnpimInterfaceDRPriorityEnabled | read-only | current | Evaluates to TRUE if all routers on this interface are using the DR Priority option. |
| 1.3.6.1.2.1.157.1.1.1.9 | ColumnpimInterfaceHelloInterval | read-create | current | The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM sp… |
| 1.3.6.1.2.1.157.1.1.1.10 | ColumnpimInterfaceTrigHelloInterval | read-create | current | The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value de… |
| 1.3.6.1.2.1.157.1.1.1.11 | ColumnpimInterfaceHelloHoldtime | read-create | current | The value set in the Holdtime field of PIM Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations ar… |
| 1.3.6.1.2.1.157.1.1.1.12 | ColumnpimInterfaceJoinPruneInterval | read-create | current | The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the … |
| 1.3.6.1.2.1.157.1.1.1.13 | ColumnpimInterfaceJoinPruneHoldtime | read-create | current | The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementati… |
| 1.3.6.1.2.1.157.1.1.1.14 | ColumnpimInterfaceDFElectionRobustness | read-create | current | The minimum number of PIM DF-Election messages that must be lost in order for DF election on this interface to fail. |
| 1.3.6.1.2.1.157.1.1.1.15 | ColumnpimInterfaceLanDelayEnabled | read-only | current | Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay option. |
| 1.3.6.1.2.1.157.1.1.1.16 | ColumnpimInterfacePropagationDelay | read-create | current | The expected propagation delay between PIM routers on this network or link. This router inserts this value into the Propagation_Delay field of the LAN Prune De… |
| 1.3.6.1.2.1.157.1.1.1.17 | ColumnpimInterfaceOverrideInterval | read-create | current | The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface. When overrid… |
| 1.3.6.1.2.1.157.1.1.1.18 | ColumnpimInterfaceEffectPropagDelay | read-only | current | The Effective Propagation Delay on this interface. This object is always 500 if pimInterfaceLanDelayEnabled is FALSE. |
| 1.3.6.1.2.1.157.1.1.1.19 | ColumnpimInterfaceEffectOverrideIvl | read-only | current | The Effective Override Interval on this interface. This object is always 2500 if pimInterfaceLanDelayEnabled is FALSE. |
| 1.3.6.1.2.1.157.1.1.1.20 | ColumnpimInterfaceSuppressionEnabled | read-only | current | Whether join suppression is enabled on this interface. This object is always TRUE if pimInterfaceLanDelayEnabled is FALSE. |
| 1.3.6.1.2.1.157.1.1.1.21 | ColumnpimInterfaceBidirCapable | read-only | current | Evaluates to TRUE if all routers on this interface are using the Bidirectional-PIM Capable option. |
| 1.3.6.1.2.1.157.1.1.1.22 | ColumnpimInterfaceDomainBorder | read-create | current | Whether or not this interface is a PIM domain border. This includes acting as a border for PIM Bootstrap Router (BSR) messages, if the BSR mechanism is in use. |
| 1.3.6.1.2.1.157.1.1.1.23 | ColumnpimInterfaceStubInterface | read-create | current | Whether this interface is a 'stub interface'. If this object is set to TRUE, then no PIM packets are sent out this interface, and any received PIM packets are … |
| 1.3.6.1.2.1.157.1.1.1.24 | ColumnpimInterfacePruneLimitInterval | read-create | current | The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PI… |
| 1.3.6.1.2.1.157.1.1.1.25 | ColumnpimInterfaceGraftRetryInterval | read-create | current | The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value define… |
| 1.3.6.1.2.1.157.1.1.1.26 | ColumnpimInterfaceSRPriorityEnabled | read-only | current | Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM. |
| 1.3.6.1.2.1.157.1.1.1.27 | ColumnpimInterfaceStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. This status object can be set to… |
| 1.3.6.1.2.1.157.1.1.1.28 | ColumnpimInterfaceStorageType | read-create | current | The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.157.1.2 | TablepimNeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM neighbors. |
| 1.3.6.1.2.1.157.1.2.1 | RowpimNeighborEntry | not-accessible | current | An entry (conceptual row) in the pimNeighborTable. |
| 1.3.6.1.2.1.157.1.2.1.1 | ColumnpimNeighborIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.2.1.157.1.2.1.2 | ColumnpimNeighborAddressType | not-accessible | current | The address type of this PIM neighbor. |
| 1.3.6.1.2.1.157.1.2.1.3 | ColumnpimNeighborAddress | not-accessible | current | The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object. |
| 1.3.6.1.2.1.157.1.2.1.4 | ColumnpimNeighborGenerationIDPresent | read-only | current | Evaluates to TRUE if this neighbor is using the Generation ID option. |
| 1.3.6.1.2.1.157.1.2.1.5 | ColumnpimNeighborGenerationIDValue | read-only | current | The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborGenerationIDPresent is FAL… |
| 1.3.6.1.2.1.157.1.2.1.6 | ColumnpimNeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.2.1.157.1.2.1.7 | ColumnpimNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will time out. The value zero indicates that this PIM neighbor will never time out. |
| 1.3.6.1.2.1.157.1.2.1.8 | ColumnpimNeighborDRPriorityPresent | read-only | current | Evaluates to TRUE if this neighbor is using the DR Priority option. |
| 1.3.6.1.2.1.157.1.2.1.9 | ColumnpimNeighborDRPriority | read-only | current | The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborDRPriorityPre… |
| 1.3.6.1.2.1.157.1.2.1.10 | ColumnpimNeighborLanPruneDelayPresent | read-only | current | Evaluates to TRUE if this neighbor is using the LAN Prune Delay option. |
| 1.3.6.1.2.1.157.1.2.1.11 | ColumnpimNeighborTBit | read-only | current | Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppressio… |
| 1.3.6.1.2.1.157.1.2.1.12 | ColumnpimNeighborPropagationDelay | read-only | current | The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPrese… |
| 1.3.6.1.2.1.157.1.2.1.13 | ColumnpimNeighborOverrideInterval | read-only | current | The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPrese… |
| 1.3.6.1.2.1.157.1.2.1.14 | ColumnpimNeighborBidirCapable | read-only | current | Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option. |
| 1.3.6.1.2.1.157.1.2.1.15 | ColumnpimNeighborSRCapable | read-only | current | Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM. |
| 1.3.6.1.2.1.157.1.3 | TablepimNbrSecAddressTable | not-accessible | current | The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighborTable defined above). |
| 1.3.6.1.2.1.157.1.3.1 | RowpimNbrSecAddressEntry | not-accessible | current | An entry (conceptual row) in the pimNbrSecAddressTable. |
| 1.3.6.1.2.1.157.1.3.1.1 | ColumnpimNbrSecAddressIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.2.1.157.1.3.1.2 | ColumnpimNbrSecAddressType | not-accessible | current | The address type of this PIM neighbor. |
| 1.3.6.1.2.1.157.1.3.1.3 | ColumnpimNbrSecAddressPrimary | not-accessible | current | The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object. |
| 1.3.6.1.2.1.157.1.3.1.4 | ColumnpimNbrSecAddress | read-only | current | The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object. |
| 1.3.6.1.2.1.157.1.4 | TablepimStarGTable | not-accessible | current | The (conceptual) table listing the non-interface specific (*,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.4.1 | RowpimStarGEntry | not-accessible | current | An entry (conceptual row) in the pimStarGTable. |
| 1.3.6.1.2.1.157.1.4.1.1 | ColumnpimStarGAddressType | not-accessible | current | The address type of this multicast group. |
| 1.3.6.1.2.1.157.1.4.1.2 | ColumnpimStarGGrpAddress | not-accessible | current | The multicast group address. The InetAddressType is given by the pimStarGAddressType object. |
| 1.3.6.1.2.1.157.1.4.1.3 | ColumnpimStarGUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.3.6.1.2.1.157.1.4.1.4 | ColumnpimStarGPimMode | read-only | current | Whether this entry represents an ASM (Any Source Multicast, used with PIM-SM) or BIDIR-PIM group. |
| 1.3.6.1.2.1.157.1.4.1.5 | ColumnpimStarGRPAddressType | read-only | current | The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown. |
| 1.3.6.1.2.1.157.1.4.1.6 | ColumnpimStarGRPAddress | read-only | current | The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the pimStarGRPAddressType. |
| 1.3.6.1.2.1.157.1.4.1.7 | ColumnpimStarGPimModeOrigin | read-only | current | The mechanism by which the PIM mode and RP for the group were learned. |
| 1.3.6.1.2.1.157.1.4.1.8 | ColumnpimStarGRPIsLocal | read-only | current | Whether the local router is the RP for the group. |
| 1.3.6.1.2.1.157.1.4.1.9 | ColumnpimStarGUpstreamJoinState | read-only | current | Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM specification. |
| 1.3.6.1.2.1.157.1.4.1.10 | ColumnpimStarGUpstreamJoinTimer | read-only | current | The time remaining before the local router next sends a periodic (*,G) Join message on pimStarGRPFIfIndex. This timer is called the (*,G) Upstream Join Timer i… |
| 1.3.6.1.2.1.157.1.4.1.11 | ColumnpimStarGUpstreamNeighborType | read-only | current | The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor. |
| 1.3.6.1.2.1.157.1.4.1.12 | ColumnpimStarGUpstreamNeighbor | read-only | current | The primary address of the neighbor on pimStarGRPFIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the… |
| 1.3.6.1.2.1.157.1.4.1.13 | ColumnpimStarGRPFIfIndex | read-only | current | The value of ifIndex for the Reverse Path Forwarding (RPF) interface towards the RP, or zero if the RPF interface is unknown. |
| 1.3.6.1.2.1.157.1.4.1.14 | ColumnpimStarGRPFNextHopType | read-only | current | The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown. |
| 1.3.6.1.2.1.157.1.4.1.15 | ColumnpimStarGRPFNextHop | read-only | current | The address of the RPF next hop towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) … |
| 1.3.6.1.2.1.157.1.4.1.16 | ColumnpimStarGRPFRouteProtocol | read-only | current | The routing mechanism via which the route used to find the RPF interface towards the RP was learned. |
| 1.3.6.1.2.1.157.1.4.1.17 | ColumnpimStarGRPFRouteAddress | read-only | current | The IP address that, when combined with the corresponding value of pimStarGRPFRoutePrefixLength, identifies the route used to find the RPF interface towards th… |
| 1.3.6.1.2.1.157.1.4.1.18 | ColumnpimStarGRPFRoutePrefixLength | read-only | current | The prefix length that, when combined with the corresponding value of pimStarGRPFRouteAddress, identifies the route used to find the RPF interface towards the … |
| 1.3.6.1.2.1.157.1.4.1.19 | ColumnpimStarGRPFRouteMetricPref | read-only | current | The metric preference of the route used to find the RPF interface towards the RP. |
| 1.3.6.1.2.1.157.1.4.1.20 | ColumnpimStarGRPFRouteMetric | read-only | current | The routing metric of the route used to find the RPF interface towards the RP. |
| 1.3.6.1.2.1.157.1.5 | TablepimStarGITable | not-accessible | current | The (conceptual) table listing the interface-specific (*,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.5.1 | RowpimStarGIEntry | not-accessible | current | An entry (conceptual row) in the pimStarGITable. |
| 1.3.6.1.2.1.157.1.5.1.1 | ColumnpimStarGIIfIndex | not-accessible | current | The ifIndex of the interface that this entry corresponds to. |
| 1.3.6.1.2.1.157.1.5.1.2 | ColumnpimStarGIUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.3.6.1.2.1.157.1.5.1.3 | ColumnpimStarGILocalMembership | read-only | current | Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_incl… |
| 1.3.6.1.2.1.157.1.5.1.4 | ColumnpimStarGIJoinPruneState | read-only | current | The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machin… |
| 1.3.6.1.2.1.157.1.5.1.5 | ColumnpimStarGIPrunePendingTimer | read-only | current | The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another … |
| 1.3.6.1.2.1.157.1.5.1.6 | ColumnpimStarGIJoinExpiryTimer | read-only | current | The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification. This objec… |
| 1.3.6.1.2.1.157.1.5.1.7 | ColumnpimStarGIAssertState | read-only | current | The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification. If pimSta… |
| 1.3.6.1.2.1.157.1.5.1.8 | ColumnpimStarGIAssertTimer | read-only | current | If pimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If pimSta… |
| 1.3.6.1.2.1.157.1.5.1.9 | ColumnpimStarGIAssertWinnerAddressType | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0). |
| 1.3.6.1.2.1.157.1.5.1.10 | ColumnpimStarGIAssertWinnerAddress | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimStarGIAssertWinnerAddressType obj… |
| 1.3.6.1.2.1.157.1.5.1.11 | ColumnpimStarGIAssertWinnerMetricPref | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is ze… |
| 1.3.6.1.2.1.157.1.5.1.12 | ColumnpimStarGIAssertWinnerMetric | read-only | current | If pimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero. |
| 1.3.6.1.2.1.157.1.6 | TablepimSGTable | not-accessible | current | The (conceptual) table listing the non-interface specific (S,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.6.1 | RowpimSGEntry | not-accessible | current | An entry (conceptual row) in the pimSGTable. |
| 1.3.6.1.2.1.157.1.6.1.1 | ColumnpimSGAddressType | not-accessible | current | The address type of the source and multicast group for this entry. |
| 1.3.6.1.2.1.157.1.6.1.2 | ColumnpimSGGrpAddress | not-accessible | current | The multicast group address for this entry. The InetAddressType is given by the pimSGAddressType object. |
| 1.3.6.1.2.1.157.1.6.1.3 | ColumnpimSGSrcAddress | not-accessible | current | The source address for this entry. The InetAddressType is given by the pimSGAddressType object. |
| 1.3.6.1.2.1.157.1.6.1.4 | ColumnpimSGUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.3.6.1.2.1.157.1.6.1.5 | ColumnpimSGPimMode | read-only | current | Whether pimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM) group. |
| 1.3.6.1.2.1.157.1.6.1.6 | ColumnpimSGUpstreamJoinState | read-only | current | Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (… |
| 1.3.6.1.2.1.157.1.6.1.7 | ColumnpimSGUpstreamJoinTimer | read-only | current | The time remaining before the local router next sends a periodic (S,G) Join message on pimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in t… |
| 1.3.6.1.2.1.157.1.6.1.8 | ColumnpimSGUpstreamNeighbor | read-only | current | The primary address of the neighbor on pimSGRPFIfIndex that the local router is sending periodic (S,G) Join messages to. This is zero if the RPF next hop is un… |
| 1.3.6.1.2.1.157.1.6.1.9 | ColumnpimSGRPFIfIndex | read-only | current | The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown. |
| 1.3.6.1.2.1.157.1.6.1.10 | ColumnpimSGRPFNextHopType | read-only | current | The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown. |
| 1.3.6.1.2.1.157.1.6.1.11 | ColumnpimSGRPFNextHop | read-only | current | The address of the RPF next hop towards the source. The InetAddressType is given by the pimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM… |
| 1.3.6.1.2.1.157.1.6.1.12 | ColumnpimSGRPFRouteProtocol | read-only | current | The routing mechanism via which the route used to find the RPF interface towards the source was learned. |
| 1.3.6.1.2.1.157.1.6.1.13 | ColumnpimSGRPFRouteAddress | read-only | current | The IP address that, when combined with the corresponding value of pimSGRPFRoutePrefixLength, identifies the route used to find the RPF interface towards the s… |
| 1.3.6.1.2.1.157.1.6.1.14 | ColumnpimSGRPFRoutePrefixLength | read-only | current | The prefix length that, when combined with the corresponding value of pimSGRPFRouteAddress, identifies the route used to find the RPF interface towards the sou… |
| 1.3.6.1.2.1.157.1.6.1.15 | ColumnpimSGRPFRouteMetricPref | read-only | current | The metric preference of the route used to find the RPF interface towards the source. |
| 1.3.6.1.2.1.157.1.6.1.16 | ColumnpimSGRPFRouteMetric | read-only | current | The routing metric of the route used to find the RPF interface towards the source. |
| 1.3.6.1.2.1.157.1.6.1.17 | ColumnpimSGSPTBit | read-only | current | Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree. |
| 1.3.6.1.2.1.157.1.6.1.18 | ColumnpimSGKeepaliveTimer | read-only | current | The time remaining before this (S,G) state expires, in the absence of explicit (S,G) local membership or (S,G) Join messages received to maintain it. This time… |
| 1.3.6.1.2.1.157.1.6.1.19 | ColumnpimSGDRRegisterState | read-only | current | Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Reg… |
| 1.3.6.1.2.1.157.1.6.1.20 | ColumnpimSGDRRegisterStopTimer | read-only | current | If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joi… |
| 1.3.6.1.2.1.157.1.6.1.21 | ColumnpimSGRPRegisterPMBRAddressType | read-only | current | The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unknown(0) if the local router is … |
| 1.3.6.1.2.1.157.1.6.1.22 | ColumnpimSGRPRegisterPMBRAddress | read-only | current | The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType is given by the pimSGRPRegister… |
| 1.3.6.1.2.1.157.1.6.1.23 | ColumnpimSGUpstreamPruneState | read-only | current | Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. … |
| 1.3.6.1.2.1.157.1.6.1.24 | ColumnpimSGUpstreamPruneLimitTimer | read-only | current | The time remaining before the local router may send a (S,G) Prune message on pimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM sp… |
| 1.3.6.1.2.1.157.1.6.1.25 | ColumnpimSGOriginatorState | read-only | current | Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specificat… |
| 1.3.6.1.2.1.157.1.6.1.26 | ColumnpimSGSourceActiveTimer | read-only | current | If pimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This tim… |
| 1.3.6.1.2.1.157.1.6.1.27 | ColumnpimSGStateRefreshTimer | read-only | current | If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer … |
| 1.3.6.1.2.1.157.1.7 | TablepimSGITable | not-accessible | current | The (conceptual) table listing the interface-specific (S,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.7.1 | RowpimSGIEntry | not-accessible | current | An entry (conceptual row) in the pimSGITable. |
| 1.3.6.1.2.1.157.1.7.1.1 | ColumnpimSGIIfIndex | not-accessible | current | The ifIndex of the interface that this entry corresponds to. |
| 1.3.6.1.2.1.157.1.7.1.2 | ColumnpimSGIUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.3.6.1.2.1.157.1.7.1.3 | ColumnpimSGILocalMembership | read-only | current | Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_incl… |
| 1.3.6.1.2.1.157.1.7.1.4 | ColumnpimSGIJoinPruneState | read-only | current | The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machin… |
| 1.3.6.1.2.1.157.1.7.1.5 | ColumnpimSGIPrunePendingTimer | read-only | current | The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another… |
| 1.3.6.1.2.1.157.1.7.1.6 | ColumnpimSGIJoinExpiryTimer | read-only | current | The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification. This objec… |
| 1.3.6.1.2.1.157.1.7.1.7 | ColumnpimSGIAssertState | read-only | current | The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM specification. |
| 1.3.6.1.2.1.157.1.7.1.8 | ColumnpimSGIAssertTimer | read-only | current | If pimSGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (S,G) Assert message on this interface. If pimSGIAss… |
| 1.3.6.1.2.1.157.1.7.1.9 | ColumnpimSGIAssertWinnerAddressType | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0). |
| 1.3.6.1.2.1.157.1.7.1.10 | ColumnpimSGIAssertWinnerAddress | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimSGIAssertWinnerAddressType object. |
| 1.3.6.1.2.1.157.1.7.1.11 | ColumnpimSGIAssertWinnerMetricPref | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is z… |
| 1.3.6.1.2.1.157.1.7.1.12 | ColumnpimSGIAssertWinnerMetric | read-only | current | If pimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero. |
| 1.3.6.1.2.1.157.1.8 | TablepimSGRptTable | not-accessible | current | The (conceptual) table listing the non-interface specific (S,G,rpt) state that PIM has. |
| 1.3.6.1.2.1.157.1.8.1 | RowpimSGRptEntry | not-accessible | current | An entry (conceptual row) in the pimSGRptTable. |
| 1.3.6.1.2.1.157.1.8.1.1 | ColumnpimSGRptSrcAddress | not-accessible | current | The source address for this entry. The InetAddressType is given by the pimStarGAddressType object. |
| 1.3.6.1.2.1.157.1.8.1.2 | ColumnpimSGRptUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.3.6.1.2.1.157.1.8.1.3 | ColumnpimSGRptUpstreamPruneState | read-only | current | Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages … |
| 1.3.6.1.2.1.157.1.8.1.4 | ColumnpimSGRptUpstreamOverrideTimer | read-only | current | The time remaining before the local router sends a triggered (S,G,rpt) Join message on pimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override… |
| 1.3.6.1.2.1.157.1.9 | TablepimSGRptITable | not-accessible | current | The (conceptual) table listing the interface-specific (S,G,rpt) state that PIM has. |
| 1.3.6.1.2.1.157.1.9.1 | RowpimSGRptIEntry | not-accessible | current | An entry (conceptual row) in the pimSGRptITable. |
| 1.3.6.1.2.1.157.1.9.1.1 | ColumnpimSGRptIIfIndex | not-accessible | current | The ifIndex of the interface that this entry corresponds to. |
| 1.3.6.1.2.1.157.1.9.1.2 | ColumnpimSGRptIUpTime | read-only | current | The time since this entry was created by the local router. |
| 1.3.6.1.2.1.157.1.9.1.3 | ColumnpimSGRptILocalMembership | read-only | current | Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMP … |
| 1.3.6.1.2.1.157.1.9.1.4 | ColumnpimSGRptIJoinPruneState | read-only | current | The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) stat… |
| 1.3.6.1.2.1.157.1.9.1.5 | ColumnpimSGRptIPrunePendingTimer | read-only | current | The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM spe… |
| 1.3.6.1.2.1.157.1.9.1.6 | ColumnpimSGRptIPruneExpiryTimer | read-only | current | The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification. … |
| 1.3.6.1.2.1.157.1.10 | TablepimBidirDFElectionTable | not-accessible | current | The (conceptual) table listing the per-RP Designated Forwarder (DF) Election state for each interface for all the RPs in BIDIR mode. |
| 1.3.6.1.2.1.157.1.10.1 | RowpimBidirDFElectionEntry | not-accessible | current | An entry (conceptual row) in the pimBidirDFElectionTable. |
| 1.3.6.1.2.1.157.1.10.1.1 | ColumnpimBidirDFElectionAddressType | not-accessible | current | The address type of the RP for which the DF state is being maintained. |
| 1.3.6.1.2.1.157.1.10.1.2 | ColumnpimBidirDFElectionRPAddress | not-accessible | current | The IP address of the RP for which the DF state is being maintained. The InetAddressType is given by the pimBidirDFElectionAddressType object. |
| 1.3.6.1.2.1.157.1.10.1.3 | ColumnpimBidirDFElectionIfIndex | not-accessible | current | The value of ifIndex for the interface for which the DF state is being maintained. |
| 1.3.6.1.2.1.157.1.10.1.4 | ColumnpimBidirDFElectionWinnerAddressType | read-only | current | The primary address type of the winner of the DF Election process. A value of unknown(0) indicates there is currently no DF. |
| 1.3.6.1.2.1.157.1.10.1.5 | ColumnpimBidirDFElectionWinnerAddress | read-only | current | The primary IP address of the winner of the DF Election process. The InetAddressType is given by the pimBidirDFElectionWinnerAddressType object. |
| 1.3.6.1.2.1.157.1.10.1.6 | ColumnpimBidirDFElectionWinnerUpTime | read-only | current | The time since the current winner (last) became elected as the DF for this RP. |
| 1.3.6.1.2.1.157.1.10.1.7 | ColumnpimBidirDFElectionWinnerMetricPref | read-only | current | The metric preference advertised by the DF Winner, or zero if there is currently no DF. |
| 1.3.6.1.2.1.157.1.10.1.8 | ColumnpimBidirDFElectionWinnerMetric | read-only | current | The metric advertised by the DF Winner, or zero if there is currently no DF. |
| 1.3.6.1.2.1.157.1.10.1.9 | ColumnpimBidirDFElectionState | read-only | current | The state of this interface with respect to DF-Election for this RP. The states correspond to the ones defined in the BIDIR-PIM specification. |
| 1.3.6.1.2.1.157.1.10.1.10 | ColumnpimBidirDFElectionStateTimer | read-only | current | The minimum time remaining after which the local router will expire the current DF state represented by pimBidirDFElectionState. |
| 1.3.6.1.2.1.157.1.11 | TablepimStaticRPTable | not-accessible | current | This table is used to manage static configuration of RPs. If the group prefixes configured for two or more rows in this table overlap, the row with the greates… |
| 1.3.6.1.2.1.157.1.11.1 | RowpimStaticRPEntry | not-accessible | current | An entry (conceptual row) in the pimStaticRPTable. This entry is preserved on agent restart. |
| 1.3.6.1.2.1.157.1.11.1.1 | ColumnpimStaticRPAddressType | not-accessible | current | The address type of this entry. |
| 1.3.6.1.2.1.157.1.11.1.2 | ColumnpimStaticRPGrpAddress | not-accessible | current | The multicast group address that, when combined with pimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the pim… |
| 1.3.6.1.2.1.157.1.11.1.3 | ColumnpimStaticRPGrpPrefixLength | not-accessible | current | The multicast group prefix length that, when combined with pimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the pi… |
| 1.3.6.1.2.1.157.1.11.1.4 | ColumnpimStaticRPRPAddress | read-create | current | The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimStaticRPAddressType object. |
| 1.3.6.1.2.1.157.1.11.1.5 | ColumnpimStaticRPPimMode | read-create | current | The PIM mode to be used for groups in this group prefix. If this object is set to ssm(2), then pimStaticRPRPAddress must be set to zero. No RP operations are e… |
| 1.3.6.1.2.1.157.1.11.1.6 | ColumnpimStaticRPOverrideDynamic | read-create | current | Whether this static RP configuration will override other group mappings in this group prefix. If this object is TRUE, then it will override: - RP information l… |
| 1.3.6.1.2.1.157.1.11.1.7 | ColumnpimStaticRPPrecedence | read-create | current | The value for pimGroupMappingPrecedence to be used for this static RP configuration. This allows fine control over which configuration is overridden by this st… |
| 1.3.6.1.2.1.157.1.11.1.8 | ColumnpimStaticRPRowStatus | read-create | current | The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before a valid value has been w… |
| 1.3.6.1.2.1.157.1.11.1.9 | ColumnpimStaticRPStorageType | read-create | current | The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.157.1.12 | TablepimAnycastRPSetTable | not-accessible | current | This table is used to manage Anycast-RP via PIM Register messages, as opposed to via other protocols such as MSDP (Multicast Source Discovery Protocol). Entrie… |
| 1.3.6.1.2.1.157.1.12.1 | RowpimAnycastRPSetEntry | not-accessible | current | An entry corresponds to a single router within a particular Anycast-RP set. This entry is preserved on agent restart. |
| 1.3.6.1.2.1.157.1.12.1.1 | ColumnpimAnycastRPSetAddressType | not-accessible | current | The address type of the Anycast-RP address and router address. |
| 1.3.6.1.2.1.157.1.12.1.2 | ColumnpimAnycastRPSetAnycastAddress | not-accessible | current | The Anycast-RP address. The InetAddressType is given by the pimAnycastRPSetAddressType object. |
| 1.3.6.1.2.1.157.1.12.1.3 | ColumnpimAnycastRPSetRouterAddress | not-accessible | current | The address of a router that is a member of the Anycast-RP set. The InetAddressType is given by the pimAnycastRPSetAddressType object. This address differs fro… |
| 1.3.6.1.2.1.157.1.12.1.4 | ColumnpimAnycastRPSetLocalRouter | read-only | current | Whether this entry corresponds to the local router. |
| 1.3.6.1.2.1.157.1.12.1.5 | ColumnpimAnycastRPSetRowStatus | read-create | current | The status of this row, by which rows in this table can be created and destroyed. This status object can be set to active(1) without setting any other columnar… |
| 1.3.6.1.2.1.157.1.12.1.6 | ColumnpimAnycastRPSetStorageType | read-create | current | The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.157.1.13 | TablepimGroupMappingTable | not-accessible | current | The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this t… |
| 1.3.6.1.2.1.157.1.13.1 | RowpimGroupMappingEntry | not-accessible | current | An entry (conceptual row) in the pimGroupMappingTable. |
| 1.3.6.1.2.1.157.1.13.1.1 | ColumnpimGroupMappingOrigin | not-accessible | current | The mechanism by which this group mapping was learned. |
| 1.3.6.1.2.1.157.1.13.1.2 | ColumnpimGroupMappingAddressType | not-accessible | current | The address type of the IP multicast group prefix. |
| 1.3.6.1.2.1.157.1.13.1.3 | ColumnpimGroupMappingGrpAddress | not-accessible | current | The IP multicast group address that, when combined with pimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given b… |
| 1.3.6.1.2.1.157.1.13.1.4 | ColumnpimGroupMappingGrpPrefixLength | not-accessible | current | The multicast group prefix length that, when combined with pimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by … |
| 1.3.6.1.2.1.157.1.13.1.5 | ColumnpimGroupMappingRPAddressType | not-accessible | current | The address type of the RP to be used for groups within this group prefix, or unknown(0) if no RP is to be used or if the RP address is unknown. This object mu… |
| 1.3.6.1.2.1.157.1.13.1.6 | ColumnpimGroupMappingRPAddress | not-accessible | current | The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimGroupMappingRPAddressType object. |
| 1.3.6.1.2.1.157.1.13.1.7 | ColumnpimGroupMappingPimMode | read-only | current | The PIM mode to be used for groups in this group prefix. |
| 1.3.6.1.2.1.157.1.13.1.8 | ColumnpimGroupMappingPrecedence | read-only | current | The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for t… |
| 1.3.6.1.2.1.157.1.14 | ScalarpimKeepalivePeriod | read-write | current | The duration of the Keepalive Timer. This is the period during which the PIM router will maintain (S,G) state in the absence of explicit (S,G) local membership… |
| 1.3.6.1.2.1.157.1.15 | ScalarpimRegisterSuppressionTime | read-write | current | The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Re… |
| 1.3.6.1.2.1.157.1.16 | ScalarpimStarGEntries | read-only | current | The number of entries in the pimStarGTable. |
| 1.3.6.1.2.1.157.1.17 | ScalarpimStarGIEntries | read-only | current | The number of entries in the pimStarGITable. |
| 1.3.6.1.2.1.157.1.18 | ScalarpimSGEntries | read-only | current | The number of entries in the pimSGTable. |
| 1.3.6.1.2.1.157.1.19 | ScalarpimSGIEntries | read-only | current | The number of entries in the pimSGITable. |
| 1.3.6.1.2.1.157.1.20 | ScalarpimSGRptEntries | read-only | current | The number of entries in the pimSGRptTable. |
| 1.3.6.1.2.1.157.1.21 | ScalarpimSGRptIEntries | read-only | current | The number of entries in the pimSGRptITable. |
| 1.3.6.1.2.1.157.1.22 | ScalarpimOutAsserts | read-only | current | The number of Asserts sent by this router. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, w… |
| 1.3.6.1.2.1.157.1.23 | ScalarpimInAsserts | read-only | current | The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented by all routers that receive an as… |
| 1.3.6.1.2.1.157.1.24 | ScalarpimLastAssertInterface | read-only | current | The interface on which this router most recently sent or received an assert, or zero if this router has not sent or received an assert. |
| 1.3.6.1.2.1.157.1.25 | ScalarpimLastAssertGroupAddressType | read-only | current | The address type of the multicast group address in the most recently sent or received assert. If this router has not sent or received an assert, then this obje… |
| 1.3.6.1.2.1.157.1.26 | ScalarpimLastAssertGroupAddress | read-only | current | The multicast group address in the most recently sent or received assert. The InetAddressType is given by the pimLastAssertGroupAddressType object. |
| 1.3.6.1.2.1.157.1.27 | ScalarpimLastAssertSourceAddressType | read-only | current | The address type of the source address in the most recently sent or received assert. If the most recent assert was (*,G), or if this router has not sent or rec… |
| 1.3.6.1.2.1.157.1.28 | ScalarpimLastAssertSourceAddress | read-only | current | The source address in the most recently sent or received assert. The InetAddressType is given by the pimLastAssertSourceAddressType object. |
| 1.3.6.1.2.1.157.1.29 | ScalarpimNeighborLossNotificationPeriod | read-write | current | The minimum time that must elapse between pimNeighborLoss notifications originated by this router. The maximum value 65535 represents an 'infinite' time, in wh… |
| 1.3.6.1.2.1.157.1.30 | ScalarpimNeighborLossCount | read-only | current | The number of neighbor loss events that have occurred. This counter is incremented when the neighbor timer expires, and the router has no other neighbors on th… |
| 1.3.6.1.2.1.157.1.31 | ScalarpimInvalidRegisterNotificationPeriod | read-write | current | The minimum time that must elapse between pimInvalidRegister notifications originated by this router. The default value of 65535 represents an 'infinite' time,… |
| 1.3.6.1.2.1.157.1.32 | ScalarpimInvalidRegisterMsgsRcvd | read-only | current | The number of invalid PIM Register messages that have been received by this device. A PIM Register message is invalid if either o the destination address of th… |
| 1.3.6.1.2.1.157.1.33 | ScalarpimInvalidRegisterAddressType | read-only | current | The address type stored in pimInvalidRegisterOrigin, pimInvalidRegisterGroup, and pimInvalidRegisterRp. If no invalid Register messages have been received, the… |
| 1.3.6.1.2.1.157.1.34 | ScalarpimInvalidRegisterOrigin | read-only | current | The source address of the last invalid Register message received by this device. |
| 1.3.6.1.2.1.157.1.35 | ScalarpimInvalidRegisterGroup | read-only | current | The IP multicast group address to which the last invalid Register message received by this device was addressed. |
| 1.3.6.1.2.1.157.1.36 | ScalarpimInvalidRegisterRp | read-only | current | The RP address to which the last invalid Register message received by this device was delivered. |
| 1.3.6.1.2.1.157.1.37 | ScalarpimInvalidJoinPruneNotificationPeriod | read-write | current | The minimum time that must elapse between pimInvalidJoinPrune notifications originated by this router. The default value of 65535 represents an 'infinite' time… |
| 1.3.6.1.2.1.157.1.38 | ScalarpimInvalidJoinPruneMsgsRcvd | read-only | current | The number of invalid PIM Join/Prune messages that have been received by this device. A PIM Join/Prune message is invalid if either o the Group to RP mapping s… |
| 1.3.6.1.2.1.157.1.39 | ScalarpimInvalidJoinPruneAddressType | read-only | current | The address type stored in pimInvalidJoinPruneOrigin, pimInvalidJoinPruneGroup, and pimInvalidJoinPruneRp. If no invalid Join/Prune messages have been received… |
| 1.3.6.1.2.1.157.1.40 | ScalarpimInvalidJoinPruneOrigin | read-only | current | The source address of the last invalid Join/Prune message received by this device. |
| 1.3.6.1.2.1.157.1.41 | ScalarpimInvalidJoinPruneGroup | read-only | current | The IP multicast group address carried in the last invalid Join/Prune message received by this device. |
| 1.3.6.1.2.1.157.1.42 | ScalarpimInvalidJoinPruneRp | read-only | current | The RP address carried in the last invalid Join/Prune message received by this device. |
| 1.3.6.1.2.1.157.1.43 | ScalarpimRPMappingNotificationPeriod | read-write | current | The minimum time that must elapse between pimRPMappingChange notifications originated by this router. The default value of 65535 represents an 'infinite' time,… |
| 1.3.6.1.2.1.157.1.44 | ScalarpimRPMappingChangeCount | read-only | current | The number of changes to active RP mappings on this device. Information about active RP mappings is available in pimGroupMappingTable. Only changes to active m… |
| 1.3.6.1.2.1.157.1.45 | ScalarpimInterfaceElectionNotificationPeriod | read-write | current | The minimum time that must elapse between pimInterfaceElection notifications originated by this router. The default value of 65535 represents an 'infinite' tim… |
| 1.3.6.1.2.1.157.1.46 | ScalarpimInterfaceElectionWinCount | read-only | current | The number of times this device has been elected DR or DF on any interface. Elections occur frequently on newly-active interfaces, as triggered Hellos establis… |
| 1.3.6.1.2.1.157.1.47 | ScalarpimRefreshInterval | read-write | current | The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This… |
| 1.3.6.1.2.1.157.1.48 | ScalarpimDeviceConfigStorageType | read-write | current | The storage type used for the global PIM configuration of this device, comprised of the objects listed below. If this storage type takes the value 'permanent',… |
| 1.3.6.1.2.1.157.2 | NodepimMIBConformance | |||
| 1.3.6.1.2.1.157.2.1 | NodepimMIBCompliances | |||
| 1.3.6.1.2.1.157.2.1.1 | CompliancepimMIBComplianceAsm | current | The compliance statement for routers which are running PIM-SM (Sparse Mode). | |
| 1.3.6.1.2.1.157.2.1.2 | CompliancepimMIBComplianceBidir | current | The compliance statement for routers which are running Bidir-PIM. | |
| 1.3.6.1.2.1.157.2.1.3 | CompliancepimMIBComplianceSsm | current | The compliance statement for routers which are running PIM SSM (Source Specific Multicast). | |
| 1.3.6.1.2.1.157.2.1.4 | CompliancepimMIBComplianceDm | current | The compliance statement for routers which are running PIM-DM (Dense Mode). | |
| 1.3.6.1.2.1.157.2.2 | NodepimMIBGroups | |||
| 1.3.6.1.2.1.157.2.2.1 | GrouppimTopologyGroup | current | A collection of read-only objects used to report local PIM topology. | |
| 1.3.6.1.2.1.157.2.2.2 | GrouppimNotificationGroup | current | A collection of notifications for signaling important PIM events. | |
| 1.3.6.1.2.1.157.2.2.3 | GrouppimTuningParametersGroup | current | A collection of writeable objects used to configure PIM behavior and to tune performance. | |
| 1.3.6.1.2.1.157.2.2.4 | GrouppimRouterStatisticsGroup | current | A collection of statistics global to the PIM router. | |
| 1.3.6.1.2.1.157.2.2.5 | GrouppimSsmGroup | current | A collection of objects to support management of PIM routers running the PIM SSM (Source Specific Multicast) protocol, in PIM mode SM (Sparse Mode). | |
| 1.3.6.1.2.1.157.2.2.6 | GrouppimRPConfigGroup | current | A collection of objects to support configuration of RPs (Rendezvous Points) and Group Mappings. | |
| 1.3.6.1.2.1.157.2.2.7 | GrouppimSmGroup | current | A collection of objects to support management of PIM routers running PIM-SM (Sparse Mode). The groups pimSsmGroup and pimRPConfigGroup are also required. | |
| 1.3.6.1.2.1.157.2.2.8 | GrouppimBidirGroup | current | A collection of objects to support management of PIM routers running BIDIR mode. The groups pimSsmGroup, pimSmGroup and pimRPConfigGroup are also required. | |
| 1.3.6.1.2.1.157.2.2.9 | GrouppimAnycastRpGroup | current | A collection of objects to support management of the PIM Anycast-RP mechanism. | |
| 1.3.6.1.2.1.157.2.2.10 | GrouppimStaticRPPrecedenceGroup | current | A collection of objects to allow fine control of interactions between static RP configuration and dynamically acquired group to RP mappings. | |
| 1.3.6.1.2.1.157.2.2.11 | GrouppimNetMgmtNotificationObjects | current | A collection of objects to support notification of PIM network management events. | |
| 1.3.6.1.2.1.157.2.2.12 | GrouppimNetMgmtNotificationGroup | current | A collection of notifications for signaling PIM network management events. | |
| 1.3.6.1.2.1.157.2.2.13 | GrouppimDiagnosticsGroup | current | Objects providing additional diagnostics related to a PIM router. | |
| 1.3.6.1.2.1.157.2.2.14 | GrouppimDmGroup | current | A collection of objects required for management of PIM Dense Mode (PIM-DM) function. The groups pimSsmGroup and pimSmGroup are also required. | |
| 1.3.6.1.2.1.157.2.2.15 | GrouppimDeviceStorageGroup | current | An object that specifies the volatility of global PIM configuration settings on this device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PimGroupMappingOriginType | INTEGER { fixed(1), configRp(2), configSsm(3), bsr(4), autoRP(5), embedded(6), other(7) } | current | The mechanism by which a PIM group mapping was learned. fixed(1) Link-local or unroutable group mappings. configRp(2) Local static RP configuration. configSsm(3) Local SSM Group configuration. bsr(4) The PIM Bootstrap R… |
| PimMode | INTEGER { none(1), ssm(2), asm(3), bidir(4), dm(5), other(6) } | current | The PIM mode in which a group is operating. none(1) The group is not using PIM, which may be the case if, for example, it is a link-local or unroutable group address. ssm(2) Source-Specific Multicast (SSM) with PIM Spar… |