PM8ECCMIB
139 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3833 | NodeschneiderElectric | |||
| 1.3.6.1.4.1.3833.1 | NodetransparentFactoryEthernet | |||
| 1.3.6.1.4.1.3833.1.7 | NodeequipmentProfile | |||
| 1.3.6.1.4.1.3833.1.7.255 | NodetfProducts | |||
| 1.3.6.1.4.1.3833.1.7.255.15 | Nodeecc | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1 | Nodepm8ecc | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1.1 | Nodemetering | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1.1 | Nodepm8OnBoardAlarmP1 | Indicates the Host Meter On-Board Alarm system has detected a state change of an enabled alarm with a priority of 1 | ||
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.1 | TablesystemWiringTypeTable | not-accessible | mandatory | The wiring system type of the host meter. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.1.1 | RowsystemWiringTypeEntry | not-accessible | mandatory | Host Meter System Wiring Type |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.1.1.1 | ColumnswtIndex | read-only | mandatory | System Wiring Type Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.1.1.2 | ColumnswtWiringType | read-only | mandatory | Single Phase Line to Neutral 2 Wire 1CT 1PT is '10' Single Phase Line to Line 2 Wire 1CT 1PT is '11' Single Phase 3-Wire 3 wire 2CT 2PT is '12' Three Phase 3 W… |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2 | TableloadCurrentTable | not-accessible | mandatory | Host Meter Load Current Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2.1 | RowloadCurrentEntry | not-accessible | mandatory | Host Meter Load Current Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2.1.1 | ColumnlcIndex | read-only | mandatory | Load Current Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2.1.2 | ColumnlcIa | read-only | mandatory | Host Meter Load Current Phase A Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2.1.3 | ColumnlcIb | read-only | mandatory | Host Meter Load Current Phase B Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2.1.4 | ColumnlcIc | read-only | mandatory | Host Meter Load Current Phase C Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.2.1.5 | ColumnlcIAvg | read-only | mandatory | Host Meter Load Current 3 Phase Average Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.3 | TablepowerTable | not-accessible | mandatory | Host Meter Power Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.3.1 | RowpowerEntry | not-accessible | mandatory | Host Meter Power Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.3.1.1 | ColumnpIndex | read-only | mandatory | Power Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.3.1.2 | ColumnpReal | read-only | mandatory | Host Meter Real Power Units = kW |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.3.1.3 | ColumnpReactive | read-only | mandatory | Host Meter Reactive Power Units = kVAR |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.3.1.4 | ColumnpApparent | read-only | mandatory | Host Meter Apparent Power Units = kVA |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.4 | TablepowerFactorTable | not-accessible | mandatory | Host Meter Power Factor Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.4.1 | RowpowerFactorEntry | not-accessible | mandatory | Host Meter Power Factor Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.4.1.1 | ColumnpfIndex | read-only | mandatory | Power Factor Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.4.1.2 | ColumnpfPowerFactorTotal | read-only | mandatory | Host Meter 3 Phase Total Power Factor |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.4.1.3 | ColumnpfPowerFactorDescription | read-only | mandatory | Describes the current power factor Lead/Lag for IEEE mode Cap/Ind for IEC mode |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5 | TablevoltageTable | not-accessible | mandatory | Host Meter Voltage Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1 | RowvoltageEntry | not-accessible | mandatory | Host Meter Voltage Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.1 | ColumnvIndex | read-only | mandatory | Voltage Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.2 | ColumnvVab | read-only | mandatory | Host Meter Voltage Line A to Line B Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.3 | ColumnvVbc | read-only | mandatory | Host Meter Voltage Line B to Line C Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.4 | ColumnvVca | read-only | mandatory | Host Meter Voltage Line C to Line A Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.5 | ColumnvVllAvg | read-only | mandatory | Host Meter Voltage Line to Line Average Voltage Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.6 | ColumnvVan | read-only | mandatory | Host Meter Voltage Line A to Neutral Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.7 | ColumnvVbn | read-only | mandatory | Host Meter Voltage Line B to Neutral Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.8 | ColumnvVcn | read-only | mandatory | Host Meter Voltage Line C to Neutral Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.5.1.9 | ColumnvVlnAvg | read-only | mandatory | Host Meter Voltage Line to Neutral 3 Phase Average Units = V (Volts) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.6 | TablefrequencyTable | not-accessible | mandatory | Host Meter Frequency Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.6.1 | RowfrequencyEntry | not-accessible | mandatory | Host Meter Frequency Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.6.1.1 | ColumnfIndex | read-only | mandatory | Frequency Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.6.1.2 | ColumnfFrequency | read-only | mandatory | Host Meter Frequency Units = Hz |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7 | TablecurrentDemandTable | not-accessible | mandatory | Host Meter Current Demand Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1 | RowcurrentDemandEntry | not-accessible | mandatory | Host Meter Current Demand Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.1 | ColumncdIndex | read-only | mandatory | Demand Current Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.2 | ColumncdPhase | read-only | mandatory | Host Meter Current Demand Phase Name |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.3 | ColumncdPresentCurrentDemand | read-only | mandatory | Host Meter Present Demand Current Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.4 | ColumncdPeakCurrentDemand | read-only | mandatory | Host Meter Peak Current Demand Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.5 | ColumncdLastCurrentDemand | read-only | mandatory | Host Meter Current Demand Last Interval Units = A (Amps) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.6 | ColumncdPeakDateTime | read-only | mandatory | Host Meter Peak Current Demand Date and Time |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.7 | ColumncdResetDateTime | read-only | mandatory | Host Meter Date and Time of Demand Current Reset |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.7.1.8 | ColumncdPhaseEnum | read-only | mandatory | Host Meter Current Demand Phase |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8 | TablepowerDemandTable | not-accessible | mandatory | Host Meter Power Demand |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1 | RowpowerDemandEntry | not-accessible | mandatory | Host Meter Power Demand Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.1 | ColumnpdIndex | read-only | mandatory | Power Demand Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.2 | ColumnpdComponent | read-only | mandatory | Host Meter Power Demand Component Units: Real = kW Reacitve = kVAR Apparent = kVA |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.3 | ColumnpdPresentPowerDemand | read-only | mandatory | Host Meter Present Demand Power |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.4 | ColumnpdPeakPowerDemand | read-only | mandatory | Host Meter Peak Power Demand |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.5 | ColumnpdLastPowerDemand | read-only | mandatory | Host Meter Power Demand Last Interval |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.6 | ColumnpdPeakDateTime | read-only | mandatory | Host Meter Peak Power Demand Date and Time |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.7 | ColumnpdResetDateTime | read-only | mandatory | Host Meter Date and Time of Power Demand Reset |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.8.1.8 | ColumnpdComponentEnum | read-only | mandatory | Host Meter Power Demand Component |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9 | TableenergyTable | not-accessible | mandatory | Host Meter Energy Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1 | RowenergyEntry | not-accessible | mandatory | Host Meter Energy Table |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.1 | ColumneIndex | read-only | mandatory | Energy Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.2 | ColumneRealEnergy | read-only | mandatory | Host Meter Real Energy Units = Wh |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.3 | ColumneDateTimeRealEnergyReset | read-only | mandatory | Host Meter Date and Time Real Energy Accumulation was reset |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.4 | ColumneReactiveEnergy | read-only | mandatory | Host Meter Reactive Energy Units = VARh |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.5 | ColumneDateTimeReactiveEnergyReset | read-only | mandatory | Host Meter Date and Time Reative Energy Accumulation was reset |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.6 | ColumneApparentEnergy | read-only | mandatory | Host Meter Apparent Energy Units = VAh |
| 1.3.6.1.4.1.3833.1.7.255.15.1.1.9.1.7 | ColumneDateTimeApparentEnergyReset | read-only | mandatory | Host Meter Date and Time Reactive Energy Accumulation was reset |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2 | Nodealarms | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1.2 | Nodepm8OnBoardAlarmP2 | Indicates the Host Meter On-Board Alarm system has detected a state change of an enabled alarm with a priority of 2 | ||
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1 | TablealarmConfigurationTable | not-accessible | mandatory | Displays the current configuration of the Host Meter On-board alarms |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1 | RowalarmConfigurationEntry | not-accessible | mandatory | Contains configuration information for the Host Meter On-board Alarms |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.1 | ColumnacIndex | read-only | mandatory | Alarm Configuration Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.2 | ColumnacPosition | read-only | mandatory | Indicates the position of the alarm. 1 - 74 |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.3 | ColumnacAlarmLabel | read-only | mandatory | The name of the alarm (user configurable) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.4 | ColumnacEnabled | read-only | mandatory | Indicates whether the alarm is enabled or not. 0 = Disabled 255 = Enabled |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.5 | ColumnacStatus | read-only | mandatory | Indicates whether the alarm is active. 0 = Inactive 1 = Active |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.6 | ColumnacCounter | read-only | mandatory | Indicates the number of times the alarm has been activated. Note: This counter resets at 32767 |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.7 | ColumnacPriority | read-only | mandatory | The priority of the alarm. 0 = No Priority 1 = Low Priority 2 = Medium Priority 3 = High Priority |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.8 | ColumnacType | read-only | mandatory | Indicates the type of the alarm. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.9 | ColumnacAlarmList1 | read-only | mandatory | Used for combinatorial type alarms - The position of the first alarm that is used to evaluate the alarm state. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.10 | ColumnacAlarmList2 | read-only | mandatory | Used for combinatorial type alarms - The position of the second alarm that is used to evaluate the alarm state. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.11 | ColumnacAlarmList3 | read-only | mandatory | Used for combinatorial type alarms - The position of the third alarm that is used to evaluate the alarm state. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.1.1.12 | ColumnacAlarmList4 | read-only | mandatory | Used for combinatorial type alarms - The position of the fourth alarm that is used to evaluate the alarm state. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2 | TablealarmSummaryBitmapsTable | not-accessible | mandatory | Indicates the state of the Host Meter On-Board Alarms |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1 | RowalarmSummaryBitmapsEntry | not-accessible | mandatory | Indicates the status of the Host Meter On-Board Alarms |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1.1 | ColumnalSumIndex | read-only | mandatory | Alarm Summary Bitmap Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1.2 | ColumnalSumAlarms1to16 | read-only | mandatory | Indicates the status of Alarms 1 - 16 (16-bits, bit-0 = Alarm 1) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1.3 | ColumnalSumAlarms17to32 | read-only | mandatory | Indicates the status of Alarms 17 - 32 (16-bits, bit-0 = Alarm 17) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1.4 | ColumnalSumAlarms33to48 | read-only | mandatory | Indicates the status of Alarms 33 - 48 (16-bits, bit-0 = Alarm 33) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1.5 | ColumnalSumAlarms49to64 | read-only | mandatory | Indicates the status of Alarms 49 - 64 (16-bits, bit-0 = Alarm 49) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.2.1.6 | ColumnalSumAlarms65to74 | read-only | mandatory | Indicates the status of Alarms 65 - 74 (16-bits, bit-0 = Alarm 65, bit-9 = Alarm 74) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.3 | TablealarmCountersTable | not-accessible | mandatory | Host Meter On-Board Alarm Counters |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.3.1 | RowalarmCountersEntry | not-accessible | mandatory | Host Meter On-Board Alarm Counters |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.3.1.1 | ColumnalCntIndex | read-only | mandatory | Alarm Counters Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.3.1.2 | ColumnalCntAlarmPosition | read-only | mandatory | The Host Meter Alarm Position |
| 1.3.6.1.4.1.3833.1.7.255.15.1.2.3.1.3 | ColumnalCntCount | read-only | mandatory | The number of times the Host Meter On-Board alarm has transitioned from an inactive state to an active state |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3 | Nodeio | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1.3 | Nodepm8OnBoardAlarmP3 | Indicates the Host Meter On-Board Alarm system has detected a state change of an enabled alarm with a priority of 3 | ||
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.1 | TableioOptionIDTable | not-accessible | mandatory | I/O Option Module Installed on the Host Meter |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.1.1 | RowioOptionIDEntry | not-accessible | mandatory | I/O Option Card Installed On-board the Host Meter |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.1.1.1 | ColumnioIDIndex | read-only | mandatory | I/O Installed Option ID Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.1.1.2 | ColumnioIDInstalledOptionSlot1 | read-only | mandatory | 0 = Not Installed 1 = Unused 2 = IO22 3 = IO26 4 = IO 2222 |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.1.1.3 | ColumnioIDInstalledOptionSlot2 | read-only | mandatory | 0 = Not Installed 1 = Unused 2 = IO22 3 = IO26 4 = IO 2222 |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2 | TableioConfigurationTable | not-accessible | mandatory | Displays the current I/O configuration for each I/O point |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1 | RowioConfigurationEntry | not-accessible | mandatory | Contains configuration information for the Host Meter On-board I/O |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.1 | ColumniocIndex | read-only | mandatory | I/O Configuration Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.2 | ColumniocPointNumber | read-only | mandatory | The point number for this I/O Point |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.3 | ColumniocLabel | read-only | mandatory | The name of the I/O Point (user configurable) |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.4 | ColumniocStateOrValue | read-only | mandatory | Displays the current value for the I/O Point Digial I/O: 1 = Active or 0 = Inactive Analog I/O: Scaled input/output value |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.5 | ColumniocPointType | read-only | mandatory | The type of I/O at this point |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.6 | ColumniocMode | read-only | mandatory | For Digital Inputs and Outputs this object is always 0 indicating �Discrete�. For Analog Inputs and Outputs this object indicates the range of analog I/O v… |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.7 | ColumniocType | read-only | mandatory | For Digital Inputs this object indicates input type 1 = Unused 2 = AC/DC For Digital Outputs this object indicates output type 1 = solid state relay 2 = electr… |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.2.1.8 | ColumniocCount | read-only | mandatory | Number of times digital I/O point has transitioned from OFF to ON |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.3 | TableioStatusBitmapsTable | not-accessible | mandatory | Host Meter I/O Status Bitmaps |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.3.1 | RowioStatusBitmapsEntry | not-accessible | mandatory | Host Meter On-Board I/O Status Bitmaps |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.3.1.1 | ColumnioStatIndex | read-only | mandatory | I/O Summary Bitmaps Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.3.3.1.2 | ColumnioStatSummaryBitmap | read-only | mandatory | Indicates the Status of the Host Meter I/O Points Bit-0 = I/O Point 1 Bit-1 = I/O Point 2 ... Bit-17 = I/O Point 18 |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4 | NodemeterSystem | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1 | TablemeterIdentificationTable | not-accessible | mandatory | Host Meter Identification |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1.1 | RowmeterIdentificationEntry | not-accessible | mandatory | Host Meter Identification |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1.1.1 | ColumnmidIndex | read-only | mandatory | Meter Identification Table Index |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1.1.2 | ColumnmidSerialNumber | read-only | mandatory | Host meter 32 bit Serial Number |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1.1.3 | ColumnmidFirmwareVersion | read-only | mandatory | Host Meter Firmware Version |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1.1.4 | ColumnmidModelNumber | read-only | mandatory | Host Meter Model Number |
| 1.3.6.1.4.1.3833.1.7.255.15.1.4.1.1.5 | ColumnmidDeviceName | read-only | mandatory | Host Meter Label plus Nameplate |
| 1.3.6.1.4.1.3833.1.7.255.15.1.5 | NodetrapVariables | |||
| 1.3.6.1.4.1.3833.1.7.255.15.1.5.1 | ScalaralarmDateAndTime | read-only | mandatory | The Date and Time of the alarm state change. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.5.2 | ScalaralarmLabel | read-only | mandatory | The Descriptive Label given to the alarm |
| 1.3.6.1.4.1.3833.1.7.255.15.1.5.3 | ScalaralarmState | read-only | mandatory | The state of the Alarm - pickup, dropout, unary, diagnostic |
| 1.3.6.1.4.1.3833.1.7.255.15.1.5.4 | ScalaralarmValue | read-only | mandatory | The value of the alarm when it changed state. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.5.5 | ScalaralarmPriority | read-only | mandatory | The priority defined for the alarm. |
| 1.3.6.1.4.1.3833.1.7.255.15.1.6 | ScalarmibVersion | read-only | mandatory | This is the current version of the MIB |