POEXMIB
86 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.41542 | Nodemanufacturer | |||
| 1.3.6.1.4.1.41542.3 | NodePOEX | |||
| 1.3.6.1.4.1.41542.3.1 | NodePOEXGatewaySpecificInfo | |||
| 1.3.6.1.4.1.41542.3.1 | NodePOEXNewSensorTraffic | This trap, when enabled, will generate a report corresponding to new data from any registered sensor as it is received. Included with the trap message are the … | ||
| 1.3.6.1.4.1.41542.3.1.1 | ScalarPOEXGatewayID | read-only | mandatory | The serial number identifier of the gateway device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of th… |
| 1.3.6.1.4.1.41542.3.1.2 | ScalarPOEXGatewayFirmwareVerNo | read-only | mandatory | The version number of the firmware of the gateway device. Note that this can change upon a firmware update. |
| 1.3.6.1.4.1.41542.3.1.3 | ScalarPOEXGatewaySensorDeviceCount | read-only | mandatory | The number of sensors registered to the gateway, i.e. on its netlist. Note that this can change as sensors are added or removed. |
| 1.3.6.1.4.1.41542.3.1.4 | ScalarPOEXGatewayTrapIPAddr | read-only | mandatory | The configured destination IP address for trap messages from this gateway. |
| 1.3.6.1.4.1.41542.3.1.5 | ScalarPOEXGatewaySensorTrapPort | read-only | mandatory | The configured IP port for trap messages from this gateway. |
| 1.3.6.1.4.1.41542.3.2 | NodePOEXDeviceAlarming | This trap, when enabled, will generate a report corresponding to new data from any registered sensor as it is received, but only if that sensor is alarming and… | ||
| 1.3.6.1.4.1.41542.3.2 | TablePOEXSensorInfoTranslatedFormatTable | not-accessible | mandatory | The (conceptual) table containing sensor-specific information in an easy-to-use translated string format, indexed by sensor ID is reported under this hierarchy… |
| 1.3.6.1.4.1.41542.3.2.1 | RowPOEXSensorInfoTranslatedFormatEntry | not-accessible | mandatory | An entry (conceptual row) in the Translated Format Table containing the latest sensor state for a single sensor. |
| 1.3.6.1.4.1.41542.3.2.1.1 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceID | read-only | mandatory | The serial number identifier of the sensor device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of the… |
| 1.3.6.1.4.1.41542.3.2.1.2 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceType | read-only | mandatory | The textual description of the type of the sensor device. |
| 1.3.6.1.4.1.41542.3.2.1.3 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceReadingValuesAll | read-only | mandatory | All of the datums for the most recent reading of the sensor device, separated by commas, in textual format. For example, a report for a temperature and humidit… |
| 1.3.6.1.4.1.41542.3.2.1.4 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceReadingUnitsAll | read-only | mandatory | All of the units corresponding to the datums for the most recent reading of the sensor device, separated by commas, in textual format. For example, for a senso… |
| 1.3.6.1.4.1.41542.3.2.1.5 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceRptUT | read-only | mandatory | The untranslated data block received from a sensor, in hexadecimal format. This may be used where a translating function isn't yet present, and for development… |
| 1.3.6.1.4.1.41542.3.2.1.6 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceReadingTime | read-only | mandatory | The time of the sensor report received most recently from a sensor. That time is reported as the number of seconds elapsed since the epoch of the gateway, whic… |
| 1.3.6.1.4.1.41542.3.2.1.7 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceReadingAge | read-only | mandatory | The age of the sensor report received most recently from a sensor. That time is reported as the number of seconds between the time of the sensor report and the… |
| 1.3.6.1.4.1.41542.3.2.1.8 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceTypeNo | read-only | mandatory | The manufacturer's type number that identifies the kind of sensor. |
| 1.3.6.1.4.1.41542.3.2.1.9 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceRFStrength | read-only | mandatory | The signal strength, in percent, of the radio link between the gateway and the particular sensor, as measured at the time of the most recent sensor report. |
| 1.3.6.1.4.1.41542.3.2.1.10 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceActive | read-only | mandatory | Either 'Active' or '' (an empty string). A sensor will be reported active if it has recently communicated with the gateway since the last reboot. If a sensor d… |
| 1.3.6.1.4.1.41542.3.2.1.11 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceAlarming | read-only | mandatory | Either 'Alarming' or 'Not alarming'. A device will report an alarm if it is programmed with a threshold found to be exceeded. Examples: a temperature sensor fo… |
| 1.3.6.1.4.1.41542.3.2.1.12 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceVoltage | read-only | mandatory | The value of the voltage of the supply powering a sensor device. Ordinarily this will report the voltage at the battery terminals of a sensor. It is provided m… |
| 1.3.6.1.4.1.41542.3.2.1.13 | ColumnPOEXSensorInfoTranslatedFormatSensorDeviceWDIndexNo | read-only | mandatory | The index number of the sensor in the gateway's sensor registration table. This is the number used in referencing the sensor in the POEXSensorInformationBySens… |
| 1.3.6.1.4.1.41542.3.2.2 | RowPOEXSensorInfoTranslatedFormatByDatumNumberEntry | not-accessible | mandatory | An entry (conceptual row) in the Translated Format Table containing the sensor datums, indexed by a sensor ID and datum number. |
| 1.3.6.1.4.1.41542.3.2.2.1 | ColumnPOEXSensorInfoTranslatedFormatByDatumNumberSensorDeviceID | read-only | mandatory | The serial number identifier of the sensor device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of the… |
| 1.3.6.1.4.1.41542.3.2.2.2 | ColumnPOEXSensorInfoTranslatedFormatByDatumNumberDatumNumber | read-only | mandatory | The number of a datum in a set of datums comprising a sensor reading. For sensors reporting one datum, this will always be one. Otherwise it will be a number b… |
| 1.3.6.1.4.1.41542.3.2.2.3 | ColumnPOEXSensorInfoTranslatedFormatByDatumNumberReadingValue | read-only | mandatory | The value of a sensor reading, in textual format, translated according to sensor and datum types. These formats can include integers, fixed-point, and binary v… |
| 1.3.6.1.4.1.41542.3.2.2.4 | ColumnPOEXSensorInfoTranslatedFormatByDatumNumberReadingUnits | read-only | mandatory | The units or scale of value of a sensor reading, reported in textual format. In several examples: a pulse counter might report 'Count', a current sensor might … |
| 1.3.6.1.4.1.41542.3.3 | TablePOEXSensorInfoBySensorIDTable | not-accessible | mandatory | The (conceptual) table containing sensor information in a legacy untranslated numeric format, addressed by sensor ID. This is provided for users who need a pre… |
| 1.3.6.1.4.1.41542.3.3.1 | RowPOEXSensorInfoBySensorIDEntry | not-accessible | mandatory | An entry (conceptual row) in the untranslated by-sensor-ID-order table containing the latest sensor state for a single sensor. |
| 1.3.6.1.4.1.41542.3.3.1.1 | ColumnPOEXSensorInfoBySensorIDSensorDeviceID | read-only | mandatory | The serial number identifier of the sensor device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of the… |
| 1.3.6.1.4.1.41542.3.3.1.2 | ColumnPOEXSensorInfoBySensorIDSensorDeviceWDIndexNo | read-only | mandatory | The index number of the sensor in the gateway's sensor registration table. This is the number used in referencing the sensor in the POEXSensorInfoBySensorRegis… |
| 1.3.6.1.4.1.41542.3.3.1.3 | ColumnPOEXSensorInfoBySensorIDSensorDeviceTypeNo | read-only | mandatory | The manufacturer's type number that identifies the kind of sensor. |
| 1.3.6.1.4.1.41542.3.3.1.4 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingAge | read-only | mandatory | The age of the sensor report received most recently from a sensor. That time is reported as the number of seconds between the time of the sensor report and the… |
| 1.3.6.1.4.1.41542.3.3.1.5 | ColumnPOEXSensorInfoBySensorIDSensorDeviceActive | read-only | mandatory | Either 1 (active) or 0 (inactive). A sensor will be reported active if it has recently communicated with the gateway since the last reboot. If a sensor device … |
| 1.3.6.1.4.1.41542.3.3.1.6 | ColumnPOEXSensorInfoBySensorIDSensorDeviceAlarming | read-only | mandatory | Either 1 (alarming) or 0 (not alarming)'. A device will report an alarm if it is programmed with a threshold found to be exceeded. Examples: a temperature sens… |
| 1.3.6.1.4.1.41542.3.3.1.7 | ColumnPOEXSensorInfoBySensorIDSensorDeviceVoltage | read-only | mandatory | A value representing the voltage of the supply powering a sensor device. Ordinarily this will report the voltage at the battery terminals of a sensor. It is pr… |
| 1.3.6.1.4.1.41542.3.3.1.8 | ColumnPOEXSensorInfoBySensorIDSensorDeviceRFStrength | read-only | mandatory | The signal strength, in percent, of the radio link between the gateway and the particular sensor, as measured at the time of the most recent sensor report. |
| 1.3.6.1.4.1.41542.3.3.1.9 | ColumnPOEXSensorInfoBySensorIDSensorDeviceRptUT | read-only | mandatory | The untranslated data block received from a sensor, in hexadecimal format. This may be used where a translating function isn't yet present, and for development… |
| 1.3.6.1.4.1.41542.3.3.1.10 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue1 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.11 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue2 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.12 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue3 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.13 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue4 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.14 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue5 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.15 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue6 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.16 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue7 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.3.1.17 | ColumnPOEXSensorInfoBySensorIDSensorDeviceReadingValue8 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4 | TablePOEXSensorInfoBySensorRegisOrderTable | not-accessible | mandatory | The (conceptual) table containing an untranslated numeric format, addressed by sensor registration order starting at 1 and ascending by one, in a legacy intege… |
| 1.3.6.1.4.1.41542.3.4.1 | RowPOEXSensorInfoBySensorRegisOrderEntry | not-accessible | mandatory | An entry (conceptual row) in the untranslated by-registration-order table containing the latest sensor state for a single sensor. |
| 1.3.6.1.4.1.41542.3.4.1.1 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevID | read-only | mandatory | The serial number identifier of the sensor device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of the… |
| 1.3.6.1.4.1.41542.3.4.1.2 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevWDIndexNo | read-only | mandatory | The index number of the sensor in the gateway's sensor registration table. This is the number used in referencing the sensor in the POEXSensorInfoBySensorRegis… |
| 1.3.6.1.4.1.41542.3.4.1.3 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevTypeNo | read-only | mandatory | The manufacturer's type number that identifies the kind of sensor. |
| 1.3.6.1.4.1.41542.3.4.1.4 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingAge | read-only | mandatory | The age of the sensor report received most recently from a sensor. That time is reported as the number of seconds between the time of the sensor report and the… |
| 1.3.6.1.4.1.41542.3.4.1.5 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevActive | read-only | mandatory | Either 1 (active) or 0 (inactive). A sensor will be reported active if it has recently communicated with the gateway since the last reboot. If a sensor device … |
| 1.3.6.1.4.1.41542.3.4.1.6 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevAlarming | read-only | mandatory | Either 1 (alarming) or 0 (not alarming)'. A device will report an alarm if it is programmed with a threshold found to be exceeded. Examples: a temperature sens… |
| 1.3.6.1.4.1.41542.3.4.1.7 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevVoltage | read-only | mandatory | A value representing the voltage of the supply powering a sensor device. Ordinarily this will report the voltage at the battery terminals of a sensor. It is pr… |
| 1.3.6.1.4.1.41542.3.4.1.8 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevRFStrength | read-only | mandatory | The signal strength, in percent, of the radio link between the gateway and the particular sensor, as measured at the time of the most recent sensor report. |
| 1.3.6.1.4.1.41542.3.4.1.9 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevRptUT | read-only | mandatory | The untranslated data block received from a sensor, in hexadecimal format. This may be used where a translating function isn't yet present, and for development… |
| 1.3.6.1.4.1.41542.3.4.1.10 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl1 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.11 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl2 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.12 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl3 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.13 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl4 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.14 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl5 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.15 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl6 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.16 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl7 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
| 1.3.6.1.4.1.41542.3.4.1.17 | ColumnPOEXSensorInfoBySensorRegisOrderSensDevReadingVl8 | read-only | mandatory | The value of a single sensor reading, or one half of a 64-bit reading, in integer format, not translated to human-readable form. See POEXSensorDeviceReadingU32… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| POEXDatumNo | INTEGER(1..8) | mandatory | The datum number of a sequence of data readings from a sensor. The range of this type depends upon the number of datums reported by a sensor device. Thus, a 3-axis accelerometer sensor might report three datums for the … |
| POEXDatumNumber | INTEGER | mandatory | The number of a datum in a set of datums comprising a sensor reading. For sensors reporting one datum, this will always be one. Otherwise it will be a number between 1 and the number of datums reported by the particular… |
| POEXSensorDeviceReadingAge | Unsigned32 | mandatory | The age of the sensor report received most recently from a sensor. That time is reported as the number of seconds between the time of the sensor report and the time this information is requested. |
| POEXSensorDeviceReadingAlarming | OCTET STRING | mandatory | Either 'Alarming' or 'Not alarming'. A device will report an alarm if it is programmed with a threshold found to be exceeded. Examples: a temperature sensor for a refrigeration unit can be programmed to alarm if the mea… |
| POEXSensorDeviceReadingTranslatedUnits | OCTET STRING | mandatory | The units or scale of value of a sensor reading, reported in textual format. In several examples: a pulse counter might report 'Count', a current sensor might report 'A', and a door sensor might report 'Closed'. |
| POEXSensorDeviceReadingTranslatedValue | OCTET STRING | mandatory | The value of a sensor reading, in textual format, translated according to sensor and datum types. These formats can include integers, fixed-point, and binary values. In several examples: a pulse counter might report '12… |
| POEXSensorDeviceReadingU32Value | Unsigned32 | mandatory | Either a single sensor value of up to 32 bits, or half of a 64-bit value. Thus where a sensor value is reportable in a single Unsigned32, one OID is sufficient to gather that value. Where more than 32 bits are needed, t… |
| POEXSensorDeviceReadingUnitsAll | OCTET STRING | mandatory | All of the units corresponding to the datums for the most recent reading of the sensor device, separated by commas, in textual format. For example, for a sensor reporting temperature and humidity this might read 'degree… |
| POEXSensorDeviceReadingUntranslated | OCTET STRING | mandatory | The untranslated data block received from a sensor, in hexadecimal format. This may be used where a translating function isn't yet present, and for development purposes. Most users should use the translated values deliv… |
| POEXSensorDeviceReadingValuesAll | OCTET STRING | mandatory | All of the datums for the most recent reading of the sensor device, separated by commas, in textual format. For example, a report for a temperature and humidity sensor might read '20.3, 35' indicating 20.3 degrees at 35… |
| POEXSensorDeviceType | OCTET STRING | mandatory | The textual description of the type of the sensor device. |
| POEXSensorID | Unsigned32 | mandatory | The serial number identifier of the sensor device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of the device. |
| POEXSensorRegistrationIndex | INTEGER(0..255) | mandatory | The index number of a sensor device in a gateway's sensor registration list. This is determined by the order in which a set of sensors has been registered, but will not change so long as the list remains fixed. This is … |
| POEXTrapAgeReported | OCTET STRING | mandatory | The age of the sensor report received most recently from a sensor. That time is reported as the number of seconds between the time of the sensor report and the time this information is requested. POEXTrapAgeReported is … |
| POEXTrapAlarmingReported | OCTET STRING POEXNewSensorTraffic TRAP-TYPE ENTERPRISE POEX VARIABLES { POEXSensorInfoTranslatedFormatSensorDeviceID, POEXTrapDevIDReported, POEXSensorInfoTranslatedFormatSensorDeviceReadingValuesAll, POEXTrapAllValuesReported, POEXSensorInfoTranslatedFormatSensorDeviceReadingUnitsAll, POEXTrapAllUnitsReported, POEXSensorInfoTranslatedFormatSensorDeviceReadingAge, POEXTrapAgeReported, POEXSensorInfoTranslatedFormatSensorDeviceAlarming, POEXTrapAlarmingReported } DESCRIPTION "This trap, when enabled, will generate a report corresponding to new data from any registered sensor as it is received. Included with the trap message are the sensor ID, all values the sensor reports, units for all those values, the age, and whether the sensor is alarming." ::= 1 POEXDeviceAlarming TRAP-TYPE ENTERPRISE POEX VARIABLES { POEXSensorInfoTranslatedFormatSensorDeviceID, POEXTrapDevIDReported, POEXSensorInfoTranslatedFormatSensorDeviceReadingValuesAll, POEXTrapAllValuesReported, POEXSensorInfoTranslatedFormatSensorDeviceReadingUnitsAll, POEXTrapAllUnitsReported, POEXSensorInfoTranslatedFormatSensorDeviceReadingAge, POEXTrapAgeReported, POEXSensorInfoTranslatedFormatSensorDeviceAlarming, POEXTrapAlarmingReported } DESCRIPTION "This trap, when enabled, will generate a report corresponding to new data from any registered sensor as it is received, but only if that sensor is alarming and the POEXNewSensorTraffic trap is disabled. (That trap will generate the same message, rendering this trap redundant.) Included with the trap message are the sensor ID, all values the sensor reports, units for all those values, the age, and whether the sensor is alarming." ::= 2 | mandatory | Either 'Alarming' or 'Not alarming'. A device will report an alarm if it is programmed with a threshold found to be exceeded. Examples: a temperature sensor for a refrigeration unit can be programmed to alarm if the mea… |
| POEXTrapAllUnitsReported | OCTET STRING | mandatory | All of the units corresponding to the datums for the most recent reading of the sensor device, separated by commas, in textual format. For example, for a sensor reporting temperature and humidity this might read 'degree… |
| POEXTrapAllValuesReported | OCTET STRING | mandatory | This will make one of two reports. For the case the sensor type is known to the gateway, this will be all of the datums for the most recent reading of the sensor device, separated by commas, in textual format, using the… |
| POEXTrapDevIDReported | Unsigned32(1..2147483631) | mandatory | The serial number identifier of the sensor device assigned and programmed by the manufacturer. This will ordinarily be printed on a label on the housing of the device. POEXTrapDevIDReported is the same as POEXSensorID. |