POLICY-MIB
230 objects
Shlomi Biton Add ipPolicyListNATPoolListIndex as an index to NAT pool list to IpPolicyListEntry.
Imported Objects
| GEN-MIB | lannet |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.36 | IdentityipPolicyMgmt | Shlomi Biton Add ipPolicyListNATPoolListIndex as an index to NAT pool list to IpPolicyListEntry. | ||
| 1.3.6.1.4.1.81.36.1 | TableipPolicyListTable | not-accessible | current | This table is used to add/delete/monitor policy lists. This table maintains a list of policy lists in the system. Each POLICY list is made up of a group of pol… |
| 1.3.6.1.4.1.81.36.1.1 | RowipPolicyListEntry | not-accessible | current | The information concerning one of the IP policy lists |
| 1.3.6.1.4.1.81.36.1.1.1 | ColumnipPolicyListSlot | read-only | current | The EntID-id (AKA module-id / box number) to which this list relates |
| 1.3.6.1.4.1.81.36.1.1.2 | ColumnipPolicyListID | read-only | current | The ID of the list. List 0 is the default list. It contains read-only rule (permit all), and a default DSCP mapping table and composite Op. When a new list is … |
| 1.3.6.1.4.1.81.36.1.1.3 | ColumnipPolicyListName | read-write | current | Name of this list. ACL default name: ACL List #list-number QoS default name: QoS List #list-number PBR default name: PBR List #list-number |
| 1.3.6.1.4.1.81.36.1.1.4 | ColumnipPolicyListValidityStatus | read-only | obsolete | Validity status of this list. Summarizes validity of rules, dscp table and composite Opertaions associated with this list. The validity context is that of the … |
| 1.3.6.1.4.1.81.36.1.1.5 | ColumnipPolicyListChecksum | read-only | obsolete | Checksum of all the configurable (read/write) mib items that are part of this list or part of any rule/dscp mapping/compositeOp that belongs to this list. Addi… |
| 1.3.6.1.4.1.81.36.1.1.6 | ColumnipPolicyListRowStatus | read-write | current | Used for creation/deletion of a list and for monitoring list status. Use CreateAndWait (5) to create a list. Destroy (6) to destroy a list. The active list can… |
| 1.3.6.1.4.1.81.36.1.1.7 | ColumnipPolicyListDefaultOperation | read-write | current | The operation that should be applied to a packet in case the packet does not match any of the user specified rules. Values pertains to ACL or QoS depending on … |
| 1.3.6.1.4.1.81.36.1.1.8 | ColumnipPolicyListCookie | read-write | current | A cookie to be associated with this list. This mib item can be used by the management application as a unique ID of the list. Note: The Agent is not aware of t… |
| 1.3.6.1.4.1.81.36.1.1.9 | ColumnipPolicyListTrackChanges | read-only | current | Counts the number of changes made to the configuration of the list including changes to the rules that are part of the list. This counters is set to 0 when the… |
| 1.3.6.1.4.1.81.36.1.1.10 | ColumnipPolicyListOwner | read-write | current | The entity that configured this list |
| 1.3.6.1.4.1.81.36.1.1.11 | ColumnipPolicyListErrMsg | read-only | obsolete | Free text describing the reason why the list is not valid. When the list is valid returns NULL string. The values returned for this MIB are not affected by the… |
| 1.3.6.1.4.1.81.36.1.1.12 | ColumnipPolicyListTrustedFields | read-write | current | Specify which fields in the incoming packet might be trusted when the policy decision should be based in the incoming packet itself. Policy decision depend on … |
| 1.3.6.1.4.1.81.36.1.1.13 | ColumnipPolicyListScope | read-write | obsolete | Controls the scope of the policy rules. forward(1) - policy rules apply to packets forwarded by the Entity. local subnet will not apply to theIf forwardAndCont… |
| 1.3.6.1.4.1.81.36.1.1.14 | ColumnipPolicyListIpOptionOperation | read-write | current | The operation that should be applied to packets carrying IP Options. Applied only for ingress access-control List. Egress is not-supported. This field points t… |
| 1.3.6.1.4.1.81.36.1.1.15 | ColumnipPolicyListIpFragmentationOperation | read-write | current | The operation that should be applied to IP fragmentation packets. Applied only for ingress access-control List. Egress is not-supported. This field points to t… |
| 1.3.6.1.4.1.81.36.1.1.16 | ColumnipPolicyListType | read-only | current | IP policy list type. Derived from list range. See ipPolicyListID MIB. |
| 1.3.6.1.4.1.81.36.1.1.17 | ColumnipPolicyListEtherTypeDefaultOperation | read-write | current | The operation that should be applied to a packet in case the packet does not match any of the user specified ether type rules. This field points to the appropr… |
| 1.3.6.1.4.1.81.36.1.1.18 | ColumnipPolicyListLocalAddress | read-write | current | Local address for VPN tunnel (crypto list). Field format: either IP address (x.x.x.x) or IP interface name. Management application shall parse and display loca… |
| 1.3.6.1.4.1.81.36.1.1.19 | ColumnipPolicyListNATPoolListIndex | read-write | current | Add ipPolicyListNATPoolListIndex as an index to NAT pool list to IpPolicyListEntry. Values: 1 - Invalid. 2 - Null, No NAT list association. 3 - 10 - NAT list i… |
| 1.3.6.1.4.1.81.36.2 | TableipPolicyRuleTable | not-accessible | current | This table is used to add/delete/modify/monitor individual policy rules in a policy list. |
| 1.3.6.1.4.1.81.36.2.1 | RowipPolicyRuleEntry | not-accessible | current | Controls all the conditional fields and its parameters for a policy rule. |
| 1.3.6.1.4.1.81.36.2.1.1 | ColumnipPolicyRuleSlot | read-only | current | The EntID-id (AKA module-id / box number) to which this rule relates |
| 1.3.6.1.4.1.81.36.2.1.2 | ColumnipPolicyRuleListID | read-only | current | The ID of the list this rule is part of. Derived from list range. See ipPolicyListID MIB. |
| 1.3.6.1.4.1.81.36.2.1.3 | ColumnipPolicyRuleID | read-only | current | Number of rule within its list. Each list may contain many rule. Lists work in a First Match manner. A rule with a lower ID would be preferred over a rule with… |
| 1.3.6.1.4.1.81.36.2.1.4 | ColumnipPolicyRuleSrcAddr | read-write | current | The IP address of the source station. A value of 255.255.255.255 in ipPolicyRuleSrcAddrWild indicates this is a DON'T CARE field. |
| 1.3.6.1.4.1.81.36.2.1.5 | ColumnipPolicyRuleSrcAddrWild | read-write | current | This field specifies the wildcard of the source IP address. Note that a the mask for a single host is 0.0.0.0 and the mask for all hosts is 255.255.255.255. Th… |
| 1.3.6.1.4.1.81.36.2.1.6 | ColumnipPolicyRuleDstAddr | read-write | current | The IP address of the destination station. A value of 255.255.255.255 in ipPolicyRuleDstAddrWild indicates this is a DON'T CARE field. |
| 1.3.6.1.4.1.81.36.2.1.7 | ColumnipPolicyRuleDstAddrWild | read-write | current | This field specifies the wildcard of the destination IP address. Note that a the mask for a single host is 0.0.0.0 and the mask for all hosts is 255.255.255.25… |
| 1.3.6.1.4.1.81.36.2.1.8 | ColumnipPolicyRuleProtocol | read-write | current | The IP protocol to which this rule relates. Use 256 to specify any IP (i.e. don't care) |
| 1.3.6.1.4.1.81.36.2.1.9 | ColumnipPolicyRuleL4SrcPortMin | read-write | current | The minimal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) UDP(17). In all other cases its values is not used. |
| 1.3.6.1.4.1.81.36.2.1.10 | ColumnipPolicyRuleL4SrcPortMax | read-write | current | The maximal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used. |
| 1.3.6.1.4.1.81.36.2.1.11 | ColumnipPolicyRuleL4DestPortMin | read-write | current | The minimal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used. |
| 1.3.6.1.4.1.81.36.2.1.12 | ColumnipPolicyRuleL4DestPortMax | read-write | current | The maximal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its value is not used. |
| 1.3.6.1.4.1.81.36.2.1.13 | ColumnipPolicyRuleEstablished | read-write | current | This field indicates the value of the established bit in the TCP header. If protocol is not TCP this values should not be used. |
| 1.3.6.1.4.1.81.36.2.1.14 | ColumnipPolicyRuleOperation | read-write | current | The operation that should be applied to a packet in case the packet does not match any of the user specified rules. Values pertains to ACL or QoS depending on … |
| 1.3.6.1.4.1.81.36.2.1.15 | ColumnipPolicyRuleApplicabilityPrecedence | read-write | current | This field indicates how important is it to enforce this rule. The higher the number the more important it is to enforce this rule. The value 9999 has a specia… |
| 1.3.6.1.4.1.81.36.2.1.16 | ColumnipPolicyRuleApplicabilityStatus | read-only | obsolete | Used to monitor if a rule is currently applicable (for the active list)or would be applicable (if the list becomes active). The applicability context is that o… |
| 1.3.6.1.4.1.81.36.2.1.17 | ColumnipPolicyRuleApplicabilityType | read-only | obsolete | Used to monitor the ApplicabilityStatus of the rule in the context of this list. The values returned for this MIB are not affected by the list status (active/i… |
| 1.3.6.1.4.1.81.36.2.1.18 | ColumnipPolicyRuleErrMsg | read-only | obsolete | Free text describing the reason why the rule is not Applicable. When rule is Applicable returns NULL string. The values returned for this MIB are not affected … |
| 1.3.6.1.4.1.81.36.2.1.19 | ColumnipPolicyRuleStatus | read-write | current | Used to configure and monitor one rule. Use CreateAndWait (4) to create a rule. Destroy (6) to destroy a rule active (1) is returned when a rule is complete an… |
| 1.3.6.1.4.1.81.36.2.1.20 | ColumnipPolicyRuleDSCPOperation | read-write | obsolete | The New DSCP value that should be applied to packets that meatch this rule. A value of 64 means no change. |
| 1.3.6.1.4.1.81.36.2.1.21 | ColumnipPolicyRuleDSCPFilter | read-write | current | A DSCP value to match against. This filter can be used instead or with the DSCP implicit mapping table. This filter is used in combination with ipPolicyRuleDSC… |
| 1.3.6.1.4.1.81.36.2.1.22 | ColumnipPolicyRuleDSCPFilterWild | read-write | current | A bitmask wildcard to match bits in the Diff-Serv byte. '1' bits are part of the comparison. '0' bits are 'don't care'. A value of 63 means match all bits. A v… |
| 1.3.6.1.4.1.81.36.2.1.23 | ColumnipPolicyRuleIcmpTypeCode | read-write | current | The ICMP type and code to which this rule relates. If protocol is not ICMP this values should not be used. Field format: - 19 bits filed. - MSB (bit 18) stand … |
| 1.3.6.1.4.1.81.36.2.1.24 | ColumnipPolicyRuleSrcAddrNot | read-write | current | Logical NOT of the source-IP or source policy user name field. Packets with source IPs or source policy user name which do NOT match the IP address & wildcard … |
| 1.3.6.1.4.1.81.36.2.1.25 | ColumnipPolicyRuleDstAddrNot | read-write | current | Logical NOT of the destination-IP field or destination policy user name. Packets with destination IPs or destination policy user name which do NOT match the IP… |
| 1.3.6.1.4.1.81.36.2.1.26 | ColumnipPolicyRuleProtocolNot | read-write | current | Logical NOT of the IP protocol field. |
| 1.3.6.1.4.1.81.36.2.1.27 | ColumnipPolicyRuleL4SrcPortNot | read-write | current | Logical NOT of the tcp source port settings. |
| 1.3.6.1.4.1.81.36.2.1.28 | ColumnipPolicyRuleL4DestPortNot | read-write | current | Logical NOT of the tcp destination port settings. |
| 1.3.6.1.4.1.81.36.2.1.29 | ColumnipPolicyRuleIcmpTypeCodeNot | read-write | current | Logical NOT of the protocol field + ICMP type and code. |
| 1.3.6.1.4.1.81.36.2.1.30 | ColumnipPolicyRuleSrcPolicyUserGroupName | read-write | current | Source user group's policy name. Identical to ugPolicyName MIB. ipPolicyRuleSrcAddr and ipPolicyRuleSrcAddrWild MIBs should be cleared when this value sets and… |
| 1.3.6.1.4.1.81.36.2.1.31 | ColumnipPolicyRuleDstPolicyUserGroupName | read-write | current | Destination user group's policy name. Identical to ugPolicyName MIB. ipPolicyRuleDstAddr and ipPolicyRuleDstAddrWild MIBs should be cleared when this value set… |
| 1.3.6.1.4.1.81.36.2.1.32 | ColumnipPolicyRuleDSCPFilterNot | read-write | current | Logical NOT of DSCP filter settings. |
| 1.3.6.1.4.1.81.36.2.1.33 | ColumnipPolicyRuleDescription | read-write | current | IP rule description field. Allowing the user to specify the description for each rule. In Crypto list a rule equals a tunnel and therefore the description is o… |
| 1.3.6.1.4.1.81.36.2.1.34 | ColumnipPolicyRuleFragment | read-write | current | This field indicates whether the rule will apply to non-initial fragments only. When this key is set the L4 information is removed. |
| 1.3.6.1.4.1.81.36.2.1.35 | ColumnipPolicyRuleDoSClass | read-write | current | Enumerated description of DoS attack this correspondingly defends from. Presently the DoS description is used for classification of DoS attacks in the MSS noti… |
| 1.3.6.1.4.1.81.36.3 | TableipPolicyControlTable | not-accessible | current | This table activates & monitors the policy application |
| 1.3.6.1.4.1.81.36.3.1 | RowipPolicyControlEntry | not-accessible | current | Each entry relates to one EntID (AKA module / box) in the stack |
| 1.3.6.1.4.1.81.36.3.1.1 | ColumnipPolicyControlSlot | read-only | current | The EntID-id (AKA module-id / box number) to which this control entry relates |
| 1.3.6.1.4.1.81.36.3.1.2 | ColumnipPolicyControlActiveGeneralList | read-write | obsolete | The ipPolicyListID of the Active general policy List on this EntID. A value of Zero means there is no active list. If the new list can not be activated the old… |
| 1.3.6.1.4.1.81.36.3.1.3 | ColumnipPolicyControlAllowedPolicyManagers | read-write | current | Specify if who is allowed to configure policy on the device. local - a local policy manager is allowed to configure (using CLI or SNMP) remote - A remote polic… |
| 1.3.6.1.4.1.81.36.3.1.4 | ColumnipPolicyControlCurrentChecksum | read-only | current | Checksum of the entire CURRENT Policy Database including (but not limited to) the following : o ipPolicyControlActiveGeneralList o ipPolicyControlAllowedPolicy… |
| 1.3.6.1.4.1.81.36.3.1.5 | ColumnipPolicyControlMinimalPolicyManagmentVersion | read-only | obsolete | The minimal policy management version that this device inter operates with as verified by actual testing. For example: The P330R/340/130 shall return 1.1 (if t… |
| 1.3.6.1.4.1.81.36.3.1.6 | ColumnipPolicyControlMaximalPolicyManagmentVersion | read-only | obsolete | The maximal policy management version that this device inter operates with as verified by actual testing. For example: The P330R/340/130 shall return 1.1 (if t… |
| 1.3.6.1.4.1.81.36.3.1.7 | ColumnipPolicyControlMIBversion | read-only | current | The version of the Policy MIB supported by the module. The format: 0.X.Y.Z Example: 2.1.2 will be coded as: 0x00020102 |
| 1.3.6.1.4.1.81.36.3.1.8 | ColumnipPolicyControlCapabilitiesGeneral | read-only | current | Reports the Policy capabilities of the device. Each bit in the string represents a capability/behavior. Value of '1' means that the behavior is supported. Valu… |
| 1.3.6.1.4.1.81.36.3.1.9 | ColumnipPolicyControlCopySourceList | read-write | current | Specify the source list index for copy operation. |
| 1.3.6.1.4.1.81.36.3.1.10 | ColumnipPolicyControlCopyDestinationList | read-write | current | Specify the destination list index for copy operation. |
| 1.3.6.1.4.1.81.36.3.1.11 | ColumnipPolicyControlCopyOperation | read-write | current | Copy operation and status of the copy operation. idle(1)- R/O - Last Copy operation finished OK. copy(2)- R/W - Activate the copy operation with the relevant s… |
| 1.3.6.1.4.1.81.36.3.1.12 | ColumnipPolicyControlCopyOperationLastStatus | read-only | current | Copy operation status. |
| 1.3.6.1.4.1.81.36.3.1.13 | ColumnipPolicyControlCopyOperationLastFailureDisplay | read-only | current | Display string for each one of the errors. |
| 1.3.6.1.4.1.81.36.4 | TableipPolicyDiffServTable | not-accessible | obsolete | This table is used to configure the policy that is associated with differntiated services. For each DSCP value the table contain the operation that should appl… |
| 1.3.6.1.4.1.81.36.4.1 | RowipPolicyDiffServEntry | not-accessible | obsolete | The information concerning one of the IP policy lists |
| 1.3.6.1.4.1.81.36.4.1.1 | ColumnipPolicyDiffServSlot | read-only | obsolete | The EntID-id (AKA module-id / box number) to which diff-serv table relates |
| 1.3.6.1.4.1.81.36.4.1.2 | ColumnipPolicyDiffServDSCP | read-only | obsolete | The DSCP value to which this entry relates. |
| 1.3.6.1.4.1.81.36.4.1.3 | ColumnipPolicyDiffServOperation | read-write | obsolete | This field points to the appropriate ipPolicyCompositeOpID in ipPolicyCompositeOpTable. The following read-only rows are always defined in ipPolicyCompositeOpT… |
| 1.3.6.1.4.1.81.36.4.1.4 | ColumnipPolicyDiffServName | read-write | obsolete | Name of this DSCP entry. This fields is used only for documentation purposes. Default name is: DSCP #N |
| 1.3.6.1.4.1.81.36.4.1.5 | ColumnipPolicyDiffServAggIndex | read-write | obsolete | Index of the aggregated group this DSCP entry belongs too. Management station may use this mib item to classify the DSCP entries to groups with the same behavi… |
| 1.3.6.1.4.1.81.36.4.1.6 | ColumnipPolicyDiffServApplicabilityPrecedence | read-write | obsolete | This field indicates how important is it to enforce this entry. The higher the number the more important it is to enforce this entry. The value 9999 has a spec… |
| 1.3.6.1.4.1.81.36.4.1.7 | ColumnipPolicyDiffServApplicabilityStatus | read-only | obsolete | Used to monitor if a DSCP entry is currently applicable or would be applicable (if the table becomes active). The values returned for this MIB are not affected… |
| 1.3.6.1.4.1.81.36.4.1.8 | ColumnipPolicyDiffServApplicabilityType | read-only | obsolete | Used to monitor the ApplicabilityStatus of the entry in the context of this table. The values returned for this MIB are not affected by the table status (activ… |
| 1.3.6.1.4.1.81.36.4.1.9 | ColumnipPolicyDiffServErrMsg | read-only | obsolete | Free text describing the reason why the entry is not Applicable. When entry is Applicable returns NULL string. The values returned for this MIB are not affecte… |
| 1.3.6.1.4.1.81.36.5 | TableipPolicyQueryTable | not-accessible | current | This table is used to query the policy application for different types of information. The first use is to query about the operation that would be applied to a… |
| 1.3.6.1.4.1.81.36.5.1 | RowipPolicyQueryEntry | not-accessible | current | Each entry relates to one EntID (AKA module / box) in the stack |
| 1.3.6.1.4.1.81.36.5.1.1 | ColumnipPolicyQuerySlot | read-only | current | The EntID-id (AKA module-id / box number) to which this rule relates |
| 1.3.6.1.4.1.81.36.5.1.2 | ColumnipPolicyQueryListID | read-write | current | The ID of the list used to check the simulated packet. |
| 1.3.6.1.4.1.81.36.5.1.3 | ColumnipPolicyQuerySrcAddr | read-write | current | The IP address of the source station in the packet |
| 1.3.6.1.4.1.81.36.5.1.4 | ColumnipPolicyQueryDstAddr | read-write | current | The IP address of the destination station in the packet |
| 1.3.6.1.4.1.81.36.5.1.5 | ColumnipPolicyQueryProtocol | read-write | current | The IP protocol in the packet. Use 256 to specify IP (i.e. don't care) |
| 1.3.6.1.4.1.81.36.5.1.6 | ColumnipPolicyQueryL4SrcPort | read-write | current | The source port of the packet. This fields is applicable only when ipPolicyQueryProtocol is TCP(6) or UDP(17). In all other cases its values is not used. |
| 1.3.6.1.4.1.81.36.5.1.7 | ColumnipPolicyQueryL4DestPort | read-write | current | The destination port of the packet. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used. |
| 1.3.6.1.4.1.81.36.5.1.8 | ColumnipPolicyQueryEstablished | read-write | current | The value of the TCP Establish bit in simulated packet. This fields is applicable only when ipPolicyQueryProtocol is TCP(6) |
| 1.3.6.1.4.1.81.36.5.1.9 | ColumnipPolicyQueryDSCP | read-write | current | The DSCP value in the simulated packet. The value 64 is used to specify DONT CARE. In this case the result maybe forwardNoChange If a specifc value is specifie… |
| 1.3.6.1.4.1.81.36.5.1.10 | ColumnipPolicyQueryOperation | read-only | current | The operation that would be applied to the simulated packet. This field points to the appropriate ipPolicyCompositeOpID in ipPolicyCompositeOpTable. The follow… |
| 1.3.6.1.4.1.81.36.5.1.11 | ColumnipPolicyQueryRuleID | read-only | current | ID of the rule of the list that resulted in the ipPolicyQueryOperation for the query. A value of 0 means that ipPolicyQueryOperation is a result of the ipPolic… |
| 1.3.6.1.4.1.81.36.5.1.12 | ColumnipPolicyQueryDSCPOperation | read-only | current | The New DSCP value that of the simulated packet A value of 64 means the DSCP field will not be changed. A value of 65 means this query can't be processed. |
| 1.3.6.1.4.1.81.36.5.1.13 | ColumnipPolicyQueryPriority | read-write | current | The 802.1p priority in the simulated packet. When the priority is dontCare, the result maybe forwardNoChange. |
| 1.3.6.1.4.1.81.36.5.1.14 | ColumnipPolicyQueryIfIndex | read-write | current | This variable should be made equal to the ifIndex of the interface for which this query should be resolved. The value of 0 means the context of the first entry… |
| 1.3.6.1.4.1.81.36.5.1.15 | ColumnipPolicyQuerySubContext | read-write | current | The direction for which this query should be resolved: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towards t… |
| 1.3.6.1.4.1.81.36.5.1.16 | ColumnipPolicyQueryIcmpTypeCode | read-write | current | Simulated packet ICMP type and code. If protocol is not ICMP this values should not be used. Field format: - 19 bits filed. - MSB (bit 18) stand for not-suppor… |
| 1.3.6.1.4.1.81.36.5.1.17 | ColumnipPolicyQueryIpFragments | read-write | current | Simulate fragment packet. |
| 1.3.6.1.4.1.81.36.5.1.18 | ColumnipPolicyQueryIpOption | read-write | current | Simulate IP option packet. |
| 1.3.6.1.4.1.81.36.5.1.19 | ColumnipPolicyQueryAccessOperation | read-only | current | This object reports the Access operation result. This object obsoletes the ipPolicyQueryOperation object. |
| 1.3.6.1.4.1.81.36.5.1.20 | ColumnipPolicyQueryNotifyOperation | read-only | current | This object reports the Notify operation result. This object obsoletes the ipPolicyQueryOperation object. |
| 1.3.6.1.4.1.81.36.5.1.21 | ColumnipPolicyQueryErrorReplyOperation | read-only | current | This object reports the Error Reply operation result. This object obsoletes the ipPolicyQueryOperation object. |
| 1.3.6.1.4.1.81.36.5.1.22 | ColumnipPolicyQueryCoSOperation | read-only | current | This object reports the CoS (Ethernet=802.1p) operation result. This object obsoletes the ipPolicyQueryOperation object. |
| 1.3.6.1.4.1.81.36.6 | TableipPolicyDiffServControlTable | not-accessible | obsolete | This table activates & monitors the Diff Serv application |
| 1.3.6.1.4.1.81.36.6.1 | RowipPolicyDiffServControlEntry | not-accessible | obsolete | Each entry relates to one EntID (AKA module / box) in the stack |
| 1.3.6.1.4.1.81.36.6.1.1 | ColumnipPolicyDiffServControlSlot | read-only | obsolete | The EntID-id (AKA module-id / box number) to which this control entry relates |
| 1.3.6.1.4.1.81.36.6.1.2 | ColumnipPolicyDiffServControlChecksum | read-only | obsolete | Checksum of all the configurable (read/write) DiffServ mib items including the Diff Serv table. This field can be used by the management application to discove… |
| 1.3.6.1.4.1.81.36.6.1.3 | ColumnipPolicyDiffServControlTrustedFields | read-write | obsolete | Specify which fields in the incoming packet might be trausted when the policy decision should be based in the incoming packet itself. Policy decision depend on… |
| 1.3.6.1.4.1.81.36.6.1.4 | ColumnipPolicyDiffServControlValidityStatus | read-only | obsolete | Validity status of the DSCP table: valid - All the entries in the DSCP table can be executed invalid - One or more of the entries in the DSCP table can NOT be … |
| 1.3.6.1.4.1.81.36.6.1.5 | ColumnipPolicyDiffServControlErrMsg | read-only | obsolete | Free text describing the reason why the table is not valid. When the table is valid returns NULL string. The values returned for this MIB are not affected by t… |
| 1.3.6.1.4.1.81.36.7 | TableipPolicyAccessControlViolationTable | not-accessible | current | This table contains infomations raerding the last packet (per module) for which ipPolicyAccessControlViolationTrap was sent. |
| 1.3.6.1.4.1.81.36.7.1 | RowipPolicyAccessControlViolationEntry | not-accessible | current | An entry conatins the information regarding the last packet for which ipPolicyAccessControlViolationTrap was sent by the specific module. |
| 1.3.6.1.4.1.81.36.7.1.1 | ColumnipPolicyAccessControlViolationEntID | read-only | current | The EntID-id (AKA module-id / box number) for which the trap was vsent |
| 1.3.6.1.4.1.81.36.7.1.2 | ColumnipPolicyAccessControlViolationSrcAddr | read-only | current | The IP address of the source station in the packet |
| 1.3.6.1.4.1.81.36.7.1.3 | ColumnipPolicyAccessControlViolationDstAddr | read-only | current | The IP address of the destination station in the packet |
| 1.3.6.1.4.1.81.36.7.1.4 | ColumnipPolicyAccessControlViolationProtocol | read-only | current | The IP protocol in the packet. Use 256 to specify IP (i.e. don't care) |
| 1.3.6.1.4.1.81.36.7.1.5 | ColumnipPolicyAccessControlViolationL4SrcPort | read-only | current | The source port of the packet. This fields is applicable only when ipPolicyAccessControlViolationProtocol is TCP(6) or UDP(17). In all other cases its values i… |
| 1.3.6.1.4.1.81.36.7.1.6 | ColumnipPolicyAccessControlViolationL4DstPort | read-only | current | The destination port of the packet. This fields is applicable only when ipPolicyAccessControlViolationProtocol is TCP(6) or UDP(17). In all other cases its val… |
| 1.3.6.1.4.1.81.36.7.1.7 | ColumnipPolicyAccessControlViolationEstablished | read-only | current | This field indicates the value of the established bit in the TCP header of the packet. This fields is applicable only when \ ipPolicyAccessControlViolationProt… |
| 1.3.6.1.4.1.81.36.7.1.8 | ColumnipPolicyAccessControlViolationDSCP | read-only | current | The DSCP value in the violating packet. The value 64 is used to specify DONT know. |
| 1.3.6.1.4.1.81.36.7.1.9 | ColumnipPolicyAccessControlViolationIfIndex | read-only | current | The interface on which the violation occured. |
| 1.3.6.1.4.1.81.36.7.1.10 | ColumnipPolicyAccessControlViolationSubCtxt | read-only | current | The sub-context on which this violation occured. |
| 1.3.6.1.4.1.81.36.7.1.11 | ColumnipPolicyAccessControlViolationTime | read-only | current | The value of sysUpTime at the time the violation was recorded |
| 1.3.6.1.4.1.81.36.7.1.12 | ColumnipPolicyAccessControlViolationRuleType | read-only | current | The type of rule that generated this notification. ruleEntry - notification generated by a rule in IpPolicyRuleEntry ipOptionOperation - notification generated… |
| 1.3.6.1.4.1.81.36.8 | TableipPolicyCompositeOpTable | not-accessible | current | This table is used to add/delete/modify/monitor individual composite operations in a policy list. |
| 1.3.6.1.4.1.81.36.8.1 | RowipPolicyCompositeOpEntry | not-accessible | current | An operation composed of different actions that can be applied to a flow. A compostie op is refernced from ipPolicyRuleOperation |
| 1.3.6.1.4.1.81.36.8.1.1 | ColumnipPolicyCompositeOpEntID | read-only | current | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.36.8.1.2 | ColumnipPolicyCompositeOpListID | read-only | current | The list object this set of operations belong to. List 0 is the default list. When a new list is created, the CompositeOp table of list 0 is copied to the comp… |
| 1.3.6.1.4.1.81.36.8.1.3 | ColumnipPolicyCompositeOpID | read-only | current | The ID of the operation. This ID is pointed by the corresponding ipPolycyRuleOperation. |
| 1.3.6.1.4.1.81.36.8.1.4 | ColumnipPolicyCompositeOpName | read-write | current | User-created name for the composite action. The operation that should be applied to a packet in case the packet does not match any of the user specified rules.… |
| 1.3.6.1.4.1.81.36.8.1.5 | ColumnipPolicyCompositeOp802priority | read-write | current | Class of Service to use. In the Ethernet world it means 802.1p tagging. |
| 1.3.6.1.4.1.81.36.8.1.6 | ColumnipPolicyCompositeOpAccess | read-write | current | Access control method - block or forward. |
| 1.3.6.1.4.1.81.36.8.1.7 | ColumnipPolicyCompositeOpDscp | read-write | current | The New DSCP value that should be applied to packets that match this rule. Applicable only to devices that can change the DSCP field of a packet. 64 - no chang… |
| 1.3.6.1.4.1.81.36.8.1.8 | ColumnipPolicyCompositeOpRSGQualityClass | read-write | current | Requested Web Switching Service quality. This field is meaningfull onnly in the context of Web-Switching applications (Server Load balancing, Application redir… |
| 1.3.6.1.4.1.81.36.8.1.9 | ColumnipPolicyCompositeOpNotify | read-write | current | Notify (send trap and/or log) to management if specific flow was detected. |
| 1.3.6.1.4.1.81.36.8.1.10 | ColumnipPolicyCompositeOpRowStatus | read-write | current | Used for creation/deletion of an operation |
| 1.3.6.1.4.1.81.36.8.1.11 | ColumnipPolicyCompositeOpErrorReply | read-write | current | Reset connection. Sends TCP reset as response to TCP syn or TCP syn+ack packets or send ICMP destination unreachable, communication administratively prohibited… |
| 1.3.6.1.4.1.81.36.8.1.12 | ColumnipPolicyCompositeOpTrustDscp | read-only | current | Trust DSCP table. trust dscp-only or trust dscp-and-cos means 'consult DSCP table' (which actually points back to composite operation table). Packet's DSCP fie… |
| 1.3.6.1.4.1.81.36.9 | TableipPolicyDSCPmapTable | not-accessible | current | This table is used to configure the policy that is associated with differntiated services. For each DSCP value the table contain the operation that should appl… |
| 1.3.6.1.4.1.81.36.9.1 | RowipPolicyDSCPmapEntry | not-accessible | current | The information concerning one of the IP policy lists |
| 1.3.6.1.4.1.81.36.9.1.1 | ColumnipPolicyDSCPmapEntID | read-only | current | The EntID-id (AKA module-id / box number) to which diff-serv table relates |
| 1.3.6.1.4.1.81.36.9.1.2 | ColumnipPolicyDSCPmapListID | read-only | current | The list object this set of DSCP mappings belong to. List 0 is the default list. When a new list is created, the DSCP mapping of list 0 is opied to the DSCP ma… |
| 1.3.6.1.4.1.81.36.9.1.3 | ColumnipPolicyDSCPmapDSCP | read-only | current | The DSCP value to which this entry relates. |
| 1.3.6.1.4.1.81.36.9.1.4 | ColumnipPolicyDSCPmapOperation | read-write | current | This field points to the appropriate ipPolicyCompositeOpID in ipPolicyCompositeOpTable. The operation that should be applied to a packet in case the packet doe… |
| 1.3.6.1.4.1.81.36.9.1.5 | ColumnipPolicyDSCPmapName | read-write | current | Name of this DSCP entry. This field is used only for documentation purposes. Default name is: CS0 - 0 CS1 - 8 CS2 - 16 CS3 - 24 CS4 - 32 CS5 - 40 CS6 - 48 CS7 … |
| 1.3.6.1.4.1.81.36.9.1.6 | ColumnipPolicyDSCPmapApplicabilityPrecedence | read-write | current | This field indicates how important is it to enforce this entry. The higher the number the more important it is to enforce this entry. The value 9999 has a spec… |
| 1.3.6.1.4.1.81.36.9.1.7 | ColumnipPolicyDSCPmapApplicabilityStatus | read-only | obsolete | Used to monitor if a DSCP entry is currently applicable or would be applicable (if the table becomes active). The applicability context is that of the first en… |
| 1.3.6.1.4.1.81.36.9.1.8 | ColumnipPolicyDSCPmapApplicabilityType | read-only | obsolete | Used to monitor the ApplicabilityStatus of the entry in the context of this table. The values returned for this MIB are not affected by the table status (activ… |
| 1.3.6.1.4.1.81.36.9.1.9 | ColumnipPolicyDSCPmapErrMsg | read-only | obsolete | Free text describing the reason why the entry is not Applicable. When entry is Applicable returns NULL string. The values returned for this MIB are not affecte… |
| 1.3.6.1.4.1.81.36.10 | TableipPolicyActivationTable | not-accessible | current | The ipPolicyActivationTable is used to map between interface/direction pairs to policy lists. This table accomodates devices that have one or more active Polic… |
| 1.3.6.1.4.1.81.36.10.1 | RowipPolicyActivationEntry | not-accessible | current | The information concerning an interface/direction pair |
| 1.3.6.1.4.1.81.36.10.1.1 | ColumnipPolicyActivationEntID | read-only | current | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.36.10.1.2 | ColumnipPolicyActivationifIndex | read-only | current | This variable should be made equal to the ifIndex of the interface for which this entry is relevant |
| 1.3.6.1.4.1.81.36.10.1.3 | ColumnipPolicyActivationSubContext | read-only | current | The direction for which this list is relevant: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towards the netwo… |
| 1.3.6.1.4.1.81.36.10.1.4 | ColumnipPolicyActivationSubContextName | read-only | current | The description of the sub context of this interface, in a human readable string, to be displayed by the NMS. |
| 1.3.6.1.4.1.81.36.10.1.5 | ColumnipPolicyActivationList | read-write | current | The number representing the list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only if the device su… |
| 1.3.6.1.4.1.81.36.10.1.6 | ColumnipPolicyActivationAclList | read-write | current | The number (300 - 399) representing the ACL list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only … |
| 1.3.6.1.4.1.81.36.10.1.7 | ColumnipPolicyActivationQoSList | read-write | current | The number (400 - 499) representing the QoS list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only … |
| 1.3.6.1.4.1.81.36.10.1.8 | ColumnipPolicyActivationSourceNatList | read-write | current | The number (500 - 599) representing the QoS list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only … |
| 1.3.6.1.4.1.81.36.10.1.9 | ColumnipPolicyActivationDestinationNatList | read-write | current | The number (600 - 699) representing the QoS list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only … |
| 1.3.6.1.4.1.81.36.10.1.10 | ColumnipPolicyActivationAntiSpoofignList | read-write | current | The number (700 - 799) representing the QoS list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only … |
| 1.3.6.1.4.1.81.36.10.1.11 | ColumnipPolicyActivationPBRList | read-write | current | The number (800 - 899) representing the PBR list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only … |
| 1.3.6.1.4.1.81.36.10.1.12 | ColumnipPolicyActivationCryptoList | read-write | current | The number (900 - 999) representing Crypto list from the ipPolicyList table that is active for this interface/direction pair. This object should be used only i… |
| 1.3.6.1.4.1.81.36.11 | NodeipPolicyValidation | |||
| 1.3.6.1.4.1.81.36.11.1 | TableipPolicyValidListTable | not-accessible | current | This table is a Read-Only table that describes the validity status of a list object in the context of interface/direction pair. Devices which have no distincti… |
| 1.3.6.1.4.1.81.36.11.1.1 | RowipPolicyValidListEntry | not-accessible | current | The information concerning an interface/direction pair |
| 1.3.6.1.4.1.81.36.11.1.1.1 | ColumnipPolicyValidListEntID | read-only | current | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.36.11.1.1.2 | ColumnipPolicyValidListIfIndex | read-only | current | This variable should be made equal to the ifIndex of the interface for which this entry is relevant |
| 1.3.6.1.4.1.81.36.11.1.1.3 | ColumnipPolicyValidListSubContext | read-only | current | The direction for which this list should be validated: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towards t… |
| 1.3.6.1.4.1.81.36.11.1.1.4 | ColumnipPolicyValidListListID | read-only | current | The number representing the list from the ipPolicyList table that is to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.1.1.5 | ColumnipPolicyValidListStatus | read-only | current | Validity status of this list in the context of a particular interface and direction, on a particular policy entity. Summarizes validity of rules, dscp table an… |
| 1.3.6.1.4.1.81.36.11.1.1.6 | ColumnipPolicyValidListErrMsg | read-only | current | Free text describing the reason why the list is not valid. When the list is valid returns NULL string. The values returned for this MIB are not affected by the… |
| 1.3.6.1.4.1.81.36.11.1.1.7 | ColumnipPolicyValidListIpOption | read-only | current | The list is not valid since filtering based on IP option (ipPolicyListIpOptionOperation) cannot be executed. |
| 1.3.6.1.4.1.81.36.11.1.1.8 | ColumnipPolicyValidListIpFragmentation | read-only | current | The list is not valid since filtering based on IP fragmentation (ipPolicyListIpFragmentationOperation) cannot be executed. |
| 1.3.6.1.4.1.81.36.11.2 | TableipPolicyValidRuleTable | not-accessible | current | This table is a Read-Only table that describes the applicability/validity status of a rule in a List in the context of interface/direction pair. Devices which … |
| 1.3.6.1.4.1.81.36.11.2.1 | RowipPolicyValidRuleEntry | not-accessible | current | The information concerning an interface/direction pair |
| 1.3.6.1.4.1.81.36.11.2.1.1 | ColumnipPolicyValidRuleEntID | read-only | current | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.36.11.2.1.2 | ColumnipPolicyValidRuleIfIndex | read-only | current | This variable should be made equal to the ifIndex of the interface for which this entry is relevant |
| 1.3.6.1.4.1.81.36.11.2.1.3 | ColumnipPolicyValidRuleSubContext | read-only | current | The direction for which this list/rule should be validated: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towa… |
| 1.3.6.1.4.1.81.36.11.2.1.4 | ColumnipPolicyValidRuleListID | read-only | current | The number representing the list from the ipPolicyList table that is to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.2.1.5 | ColumnipPolicyValidRuleRuleID | read-only | current | The rule ID from ipPolicyRuleTable, in theis list, to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.2.1.6 | ColumnipPolicyValidRuleStatus | read-only | current | Used to monitor if a rule is is currently applicable or would be applicable (if the table becomes active). In the context of a particular interface and directi… |
| 1.3.6.1.4.1.81.36.11.2.1.7 | ColumnipPolicyValidRuleApplicabilityType | read-only | current | Used to monitor the ApplicabilityStatus of the rule in the context of this list. The values returned for this MIB are not affected by the list status (active/i… |
| 1.3.6.1.4.1.81.36.11.2.1.8 | ColumnipPolicyValidRuleErrMsg | read-only | current | Free text describing the reason why the rule is not Applicable. When rule is Applicable returns NULL string. The values returned for this MIB are not affected … |
| 1.3.6.1.4.1.81.36.11.3 | TableipPolicyValidDSCPTable | not-accessible | current | This table is a Read-Only table that describes the applicability/validity status of a DSCP mapping in a List in the context of interface/direction pair. In ess… |
| 1.3.6.1.4.1.81.36.11.3.1 | RowipPolicyValidDSCPEntry | not-accessible | current | The information concerning an interface/direction pair |
| 1.3.6.1.4.1.81.36.11.3.1.1 | ColumnipPolicyValidDSCPEntID | read-only | current | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.36.11.3.1.2 | ColumnipPolicyValidDSCPIfIndex | read-only | current | This variable should be made equal to the ifIndex of the interface for which this entry is relevant |
| 1.3.6.1.4.1.81.36.11.3.1.3 | ColumnipPolicyValidDSCPSubContext | read-only | current | The direction for which this list/rule should be validated: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towa… |
| 1.3.6.1.4.1.81.36.11.3.1.4 | ColumnipPolicyValidDSCPListID | read-only | current | The number representing the list from the ipPolicyList table that is to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.3.1.5 | ColumnipPolicyValidDSCPvalue | read-only | current | The DSCP value (from ipPolicyDSCPmapTable) in this list, to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.3.1.6 | ColumnipPolicyValidDSCPStatus | read-only | current | Used to monitor if a DSCP entry is currently applicable or would be applicable (if the table becomes active). In the context of a particular interface and dire… |
| 1.3.6.1.4.1.81.36.11.3.1.7 | ColumnipPolicyValidDSCPApplicabilityType | read-only | current | Used to monitor the ApplicabilityStatus of the entry in the context of this table. The values returned for this MIB are not affected by the table status (activ… |
| 1.3.6.1.4.1.81.36.11.3.1.8 | ColumnipPolicyValidDSCPErrMsg | read-only | current | Free text describing the reason why the entry is not Applicable. When entry is Applicable returns NULL string. The values returned for this MIB are not affecte… |
| 1.3.6.1.4.1.81.36.11.4 | TableipPolicyValidEtherTypeRuleTable | not-accessible | current | This table is a Read-Only table that describes the applicability/validity status of a rule in a List in the context of interface/direction pair. Devices which … |
| 1.3.6.1.4.1.81.36.11.4.1 | RowipPolicyValidEtherTypeRuleEntry | not-accessible | current | The information concerning an interface/direction pair |
| 1.3.6.1.4.1.81.36.11.4.1.1 | ColumnipPolicyValidEtherTypeRuleEntID | read-only | current | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.36.11.4.1.2 | ColumnipPolicyValidEtherTypeRuleIfIndex | read-only | current | This variable should be made equal to the ifIndex of the interface for which this entry is relevant |
| 1.3.6.1.4.1.81.36.11.4.1.3 | ColumnipPolicyValidEtherTypeRuleSubContext | read-only | current | The direction for which this list/rule should be validated: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towa… |
| 1.3.6.1.4.1.81.36.11.4.1.4 | ColumnipPolicyValidEtherTypeRuleListID | read-only | current | The number representing the list from the ipPolicyList table that is to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.4.1.5 | ColumnipPolicyValidEtherTypeRuleRuleID | read-only | current | The rule ID from etherTypeRuleTable, in theis list, to be validated for this interface/direction pair. |
| 1.3.6.1.4.1.81.36.11.4.1.6 | ColumnipPolicyValidEtherTypeRuleStatus | read-only | current | Used to monitor if a rule is is currently applicable or would be applicable (if the table becomes active). In the context of a particular interface and directi… |
| 1.3.6.1.4.1.81.36.11.4.1.7 | ColumnipPolicyValidEtherTypeRuleApplicabilityType | read-only | current | Used to monitor the ApplicabilityStatus of the rule in the context of this list. The values returned for this MIB are not affected by the list status (active/i… |
| 1.3.6.1.4.1.81.36.11.4.1.8 | ColumnipPolicyValidEtherTypeRuleErrMsg | read-only | current | Free text describing the reason why the rule is not Applicable. When rule is Applicable returns NULL string. The values returned for this MIB are not affected … |
| 1.3.6.1.4.1.81.36.12 | TableetherTypeRuleTable | not-accessible | current | This table is used to add/delete/modify/monitor individual ether type policy rules in a policy list. |
| 1.3.6.1.4.1.81.36.12.1 | RowetherTypeRuleEntry | not-accessible | current | Controls all the conditional fields and its parameters for a policy rule. |
| 1.3.6.1.4.1.81.36.12.1.1 | ColumnipPolicyEtherTypeRuleSlot | read-only | current | The EntID-id (AKA module-id / box number) to which this ether type rule relates |
| 1.3.6.1.4.1.81.36.12.1.2 | ColumnipPolicyEtherTypeRuleListID | read-only | current | The ID of the list this ether type rule is part of. Derived from list range. See ipPolicyListID MIB. |
| 1.3.6.1.4.1.81.36.12.1.3 | ColumnipPolicyEtherTypeRuleID | read-only | current | Number of ether type rule within its list. Each list may contain many rule. Lists work in a First Match manner. A rule with a lower ID would be preferred over … |
| 1.3.6.1.4.1.81.36.12.1.4 | ColumnipPolicyEtherTypeRuleEtherType | read-write | current | Packet's ether type. IP protocol (2048 - 0x800) is not allowed. |
| 1.3.6.1.4.1.81.36.12.1.5 | ColumnipPolicyEtherTypeRuleTrafficType | read-write | current | Match packets based on either broadcast, multicast, both or all packets. |
| 1.3.6.1.4.1.81.36.12.1.6 | ColumnipPolicyEtherTypeRuleOperation | read-write | current | The operation that should be applied to a packet in case the packet matches the rule. This field points to the appropriate ipPolicyCompositeOpID in ipPolicyCom… |
| 1.3.6.1.4.1.81.36.12.1.7 | ColumnipPolicyEtherTypeRowStatus | read-write | current | Used for creation/deletion of a list and for monitoring list status. Use CreateAndWait (5) to create a list. Destroy (6) to destroy a list. The active list can… |
| 1.3.6.1.4.1.81.36.13 | TableetherTypePolicyQueryTable | not-accessible | current | This table is used to query the policy application for different types of ehter type information. The first use is to query about the operation that would be a… |
| 1.3.6.1.4.1.81.36.13.1 | RowetherTypePolicyQueryEntry | not-accessible | current | Each entry relates to one EntID (AKA module / box) in the stack |
| 1.3.6.1.4.1.81.36.13.1.1 | ColumnetherTypePolicyQuerySlot | read-only | current | The EntID-id (AKA module-id / box number) to which this rule relates |
| 1.3.6.1.4.1.81.36.13.1.2 | ColumnetherTypePolicyQueryListID | read-write | current | The ID of the list used to check the simulated packet. |
| 1.3.6.1.4.1.81.36.13.1.3 | ColumnetherTypePolicyQueryIfIndex | read-write | current | This variable should be made equal to the ifIndex of the interface for which this query should be resolved. The value of 0 means the context of the first entry… |
| 1.3.6.1.4.1.81.36.13.1.4 | ColumnetherTypePolicyQuerySubContext | read-write | current | The direction for which this query should be resolved: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towards t… |
| 1.3.6.1.4.1.81.36.13.1.5 | ColumnetherTypePolicyQueryType | read-write | current | Simulated packet ether type. IP protocol (2048 = 0x800) is not allowed. |
| 1.3.6.1.4.1.81.36.13.1.6 | ColumnetherTypePolicyQueryTrafficType | read-write | current | Simulated packet ether type traffic type. |
| 1.3.6.1.4.1.81.36.13.1.7 | ColumnetherTypePolicyQueryOperation | read-only | current | The operation that would be applied to the simulated packet. This field points to the appropriate ipPolicyCompositeOpID in ipPolicyCompositeOpTable. The follow… |
| 1.3.6.1.4.1.81.36.13.1.8 | ColumnetherTypePolicyQueryRuleID | read-only | current | ID of the rule of the list that resulted in the query. A value of 0 means that result of the ipEtherTypePolicyListDefaultOperation 10000 should be returned in … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TruthValue | INTEGER { true(1), false(2) } | current | Represents a boolean value. |