POSEIDON-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises Gauge |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21796 | Nodehwgroup | |||
| 1.3.6.1.4.1.21796.3 | NodecharonII | |||
| 1.3.6.1.4.1.21796.3.3 | Nodeposeidon | |||
| 1.3.6.1.4.1.21796.3.3.1 | NodeinpAlarmStateChanged | Input state entered/left alarm condition. This trap always follows tsTrapAlarmStart/tsTrapAlarmEnd. | ||
| 1.3.6.1.4.1.21796.3.3.1 | TableinpTable | not-accessible | current | A list of binary input entries. |
| 1.3.6.1.4.1.21796.3.3.1.1 | RowinpEntry | not-accessible | current | An entry containing information applicable to a particular binary input. |
| 1.3.6.1.4.1.21796.3.3.1.1.1 | ColumninpIndex | not-accessible | current | The binary input index. |
| 1.3.6.1.4.1.21796.3.3.1.1.2 | ColumninpValue | read-only | current | The binary input value. |
| 1.3.6.1.4.1.21796.3.3.1.1.3 | ColumninpName | read-write | current | The binary input name. |
| 1.3.6.1.4.1.21796.3.3.1.1.4 | ColumninpAlarmSetup | read-write | current | You can enable alarm for this binary input. Alarm can be inactive or active for On/Off state. |
| 1.3.6.1.4.1.21796.3.3.1.1.5 | ColumninpAlarmState | read-only | current | The binary input alarm state. |
| 1.3.6.1.4.1.21796.3.3.2 | TableoutTable | not-accessible | current | A list of binary output entries. |
| 1.3.6.1.4.1.21796.3.3.2 | NodesensAlarmStateChanged | Nth sensor state entered/left alarm condition. This trap always follows tsTrapAlarmStart/tsTrapAlarmEnd. | ||
| 1.3.6.1.4.1.21796.3.3.2.1 | RowoutEntry | not-accessible | current | An entry containing information applicable to a particular binary output. |
| 1.3.6.1.4.1.21796.3.3.2.1.1 | ColumnoutIndex | not-accessible | current | The binary output index. |
| 1.3.6.1.4.1.21796.3.3.2.1.2 | ColumnoutValue | read-write | current | The binary output value. 0 off(open), 1 on(close) |
| 1.3.6.1.4.1.21796.3.3.2.1.3 | ColumnoutName | read-write | current | The binary output name. |
| 1.3.6.1.4.1.21796.3.3.2.1.4 | ColumnoutType | read-only | current | The binary output type. 0 relay (off, on), 1 rts (-10,+10V), 2 dtr (0,10V) |
| 1.3.6.1.4.1.21796.3.3.2.1.5 | ColumnoutMode | read-write | current | The binary output mode. 0 manual, 1 autoAlarm, 2 autoTriggerEq, 3 autoTriggerHi, 4 autoTriggerLo |
| 1.3.6.1.4.1.21796.3.3.3 | TablesensTable | not-accessible | current | A list of sensor table entries. The number of entries corresponds with number of detected sensors. |
| 1.3.6.1.4.1.21796.3.3.3 | NodetsTrapAlarmStart | This trap is sent each time an alarm is inserted into to the alarm table. It is sent on the insertion of all alarms except for powerFailure. | ||
| 1.3.6.1.4.1.21796.3.3.3.1 | RowsensEntry | not-accessible | current | An entry containing information applicable to a particular sensor. |
| 1.3.6.1.4.1.21796.3.3.3.1.1 | ColumnsensIndex | not-accessible | current | The sensor index. |
| 1.3.6.1.4.1.21796.3.3.3.1.2 | ColumnsensName | read-only | current | The sensor name. |
| 1.3.6.1.4.1.21796.3.3.3.1.4 | ColumnsensState | read-only | current | The sensor state. |
| 1.3.6.1.4.1.21796.3.3.3.1.5 | ColumnsensString | read-only | current | The string representation of sensor value. |
| 1.3.6.1.4.1.21796.3.3.3.1.6 | ColumnsensValue | read-only | current | The integer (decimal * 10) representation of sensor value. |
| 1.3.6.1.4.1.21796.3.3.3.1.7 | ColumnsensValueRaw | read-only | current | The original raw value of sensor (it differs for each sensor type, especially 1-Wire sensors have different precisions). |
| 1.3.6.1.4.1.21796.3.3.3.1.8 | ColumnsensID | read-only | current | The sensor ID. |
| 1.3.6.1.4.1.21796.3.3.3.1.9 | ColumnsensUnit | read-only | current | The sensor unit. |
| 1.3.6.1.4.1.21796.3.3.3.1.10 | ColumnsensUnitString | read-only | current | The string representation of sensor unit. |
| 1.3.6.1.4.1.21796.3.3.4 | NodetsTrapAlarmEnd | This trap is sent each time an alarm is removed from the alarm table. It is sent on the removal of all alarms. | ||
| 1.3.6.1.4.1.21796.3.3.50 | NodetsAlarm | |||
| 1.3.6.1.4.1.21796.3.3.50.1 | ScalartsAlarmsPresent | read-only | current | The present number of active alarm conditions. |
| 1.3.6.1.4.1.21796.3.3.50.2 | TabletsAlarmTable | not-accessible | current | A list of alarm table entries. The table contains zero, one, or many rows at any moment, depending upon the number of alarm conditions in effect. The table is … |
| 1.3.6.1.4.1.21796.3.3.50.2.1 | RowtsAlarmEntry | not-accessible | current | An entry containing information applicable to a particular alarm. |
| 1.3.6.1.4.1.21796.3.3.50.2.1.1 | ColumntsAlarmIdx | not-accessible | current | An index to alarm table. |
| 1.3.6.1.4.1.21796.3.3.50.2.1.2 | ColumntsAlarmId | read-only | current | A unique identifier for an alarm condition. This value must remain constant. |
| 1.3.6.1.4.1.21796.3.3.50.2.1.3 | ColumntsAlarmDescr | read-only | current | Description of the alarm condition. |
| 1.3.6.1.4.1.21796.3.3.50.2.1.4 | ColumntsAlarmSensName | read-only | current | Name of sensor with alarm condition. |
| 1.3.6.1.4.1.21796.3.3.50.2.1.5 | ColumntsAlarmTime | read-only | current | The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before ag… |
| 1.3.6.1.4.1.21796.3.3.70 | Nodeinfo | |||
| 1.3.6.1.4.1.21796.3.3.70.1 | ScalarinfoAddressMAC | read-only | current | MAC address in text form. It is here to distinguish devices in trap messages. |
| 1.3.6.1.4.1.21796.3.3.99 | Nodesetup | |||
| 1.3.6.1.4.1.21796.3.3.99.1 | NodesensSetup | |||
| 1.3.6.1.4.1.21796.3.3.99.1.1 | ScalarunitType | read-write | current | Units for displayed values. All setup values are fixed in Celsius |
| 1.3.6.1.4.1.21796.3.3.99.1.2 | TablesensSetupTable | not-accessible | current | A list of sensor table setup entries. The number of entries corresponds with number of detected sensors. |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1 | RowsensSetupEntry | not-accessible | current | An entry containing setup information for a particular sensor. |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1.1 | ColumnsensSetupIndex | not-accessible | current | The sensor setup table index. |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1.2 | ColumnsensSetupName | read-write | current | The sensor name. |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1.5 | ColumnsensFlags | read-write | current | The behaviour of sensor - 0x01: range or level detection - 0x02: enable trap sending - 0x08: sensor enabled - 0x10: enable SMS sending - 0x20: enable email sen… |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1.6 | ColumnsensLimitMin | read-write | current | The sensor low limit. |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1.7 | ColumnsensLimitMax | read-write | current | The sensor high limit. |
| 1.3.6.1.4.1.21796.3.3.99.1.2.1.8 | ColumnsensHysteresis | read-write | current | The sensor hysteresis. |