POWERSUPPLY-MIB
65 objects
This MIB module is for representing switch power supply entity.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| HP-ICF-OID | hpSwitch |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.55 | IdentityhpicfPsMIB | This MIB module is for representing switch power supply entity. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1 | NodehpicfEntityPs | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1 | TablehpicfPsTable | not-accessible | current | This table contains one row per switch power supply entity. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1 | RowhpicfPsEntry | not-accessible | current | Information about the power supply physical entity table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.1 | ColumnhpicfPsBayNum | not-accessible | current | The index of switch power supply entity. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2 | ColumnhpicfPsState | read-only | current | The physical state of the switch power supply entity. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.3 | ColumnhpicfPsFailures | read-only | current | Number of times power supply has failed. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.4 | ColumnhpicfPsTemp | read-only | current | The temperature of the power supply in Celsius |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.5 | ColumnhpicfPsVoltageInfo | read-only | current | The voltage info and max current of power supply. e.g. AC 120V/220V. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.6 | ColumnhpicfPsWattageCur | read-only | current | The present power supply wattage information |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.7 | ColumnhpicfPsWattageMax | read-only | current | The maximum wattage of the power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.8 | ColumnhpicfPsLastCall | read-only | current | The number of seconds since the switch power supply is up. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.9 | ColumnhpicfPsModel | read-only | current | This object provides the model number of the power supply unit and it is specified as the Jnumber. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2 | TablehpicfXpsTable | not-accessible | current | This table contains one row per port of this zone of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1 | RowhpicfXpsEntry | not-accessible | current | Information about all the ports on the external power supply. On a stack, each member can be connected to the one of the ports of the external power supply. Wi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.1 | ColumnhpicfXpsConnectingPort | not-accessible | current | This is the port which connects the switch to the current zone of the external power supply. External power supply has 3 zones. In zone 1, user can connect upt… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.2 | ColumnhpicfXpsPortOperStatus | read-only | current | Operating status of the port which connects the switch to the external power supply . By default, all the ports are enabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.3 | ColumnhpicfXpsSwitchSerialNo | read-only | current | This is the serial number of the switch connected to the current port of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.4 | ColumnhpicfXpsConnectionState | read-only | current | The connection status between the external power supply and the switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.5 | ColumnhpicfXpsSysName | read-only | current | This indicates the name of the system connected to the current port of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.6 | ColumnhpicfXpsMACAddress | read-only | current | MAC address of the switch connected to the current port of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.7 | ColumnhpicfXpsSwitchOSVersion | read-only | current | This MIB object specifies the OS version of the switch connected to the current port of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.8 | ColumnhpicfXpsSwitchIpsVoltage | read-only | current | Internal power supply voltage of the switch connected to this port of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.9 | ColumnhpicfXpsSwitchIpsWattage | read-only | current | Internal power supply wattage of the switch connected to this port of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.10 | ColumnhpicfXpsPower | read-only | current | The power allocated from the external power supply to the switch connected to this port. External power is available when both the internal power supply and ex… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.11 | ColumnhpicfXpsSupportedCableVersion | read-only | current | Cable record version supported by the switch software of the switch connected to the current cable. This object will be useful for debugging when switches conn… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.12 | ColumnhpicfXpsSupportedZoneVersion | read-only | current | Zone record version supported by the switch software of the switch connected to the current port of the external power supply. Configurations are not allowed i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.13 | ColumnhpicfXpsSwitchModType | read-only | current | J number of the switch connected to the current cable of external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3 | TablehpicfXpsSwitchConfigTable | not-accessible | current | This table contains one row per system which is connected to the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1 | RowhpicfXpsSwitchConfigEntry | not-accessible | current | This provides the configuration information of the switch that is connected to external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.1 | ColumnhpicfXpsSwitchAdminStatus | read-write | current | Administrative status of the switch that is connected to the external power supply.By default, the status is enabled and the switch will receive backup power a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.2 | ColumnhpicfXpsSwitchAutoRecovery | read-write | current | The status of external power supply auto recovery on the switch that is currently connected to the external power supply.By default, auto-recovery feature is e… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.3 | ColumnhpicfXpsAllowPortsSupported | read-write | current | From this object, the amount of PoE power allocated to the current switch can be reduced, which might turn off some of the low priority PoE ports. This object … |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.4 | ColumnhpicfXpsReset | read-write | current | This object indicates the type of reset operation that will be performed on the current zone of the external power supply. All the configurations can be restor… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.5 | ColumnhpicfXpsType | read-only | current | The name of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.6 | ColumnhpicfXpsSerialNum | read-only | current | The serial number of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.7 | ColumnhpicfXpsModuleName | read-only | current | This indicates the J number of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.8 | ColumnhpicfXpsPowerShareReqStatus | read-only | current | Status of the external power supply power share request. Set requests for hpicfXpsPowerDistMap will take longer time for completion.This object can be used to … |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.9 | ColumnhpicfXpsResetReqStatus | read-only | current | Status of the external power supply reset request. Set requests for hpicfXpsReset will take longer time for completion. This object can be used to get the stat… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4 | TablehpicfXpsZoneTable | not-accessible | current | This table contains one row per zone of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1 | RowhpicfXpsZoneEntry | not-accessible | current | Information about this zone of external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.1 | ColumnhpicfXpsZoneNo | read-only | current | This indicates the zone number of the external power supply. The external power supply has 3 zones. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.2 | ColumnhpicfXpsZoneState | read-only | current | Physical state of the current zone of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3 | ColumnhpicfXpsZonePowerShareMap | read-write | current | This indicates the power share map on the current zone. The map indicates the ports on the external power supply that is configured to deliver power to the con… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.4 | ColumnhpicfXpsZoneVoltage | read-only | current | The voltage information of the external power supply in this zone. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.5 | ColumnhpicfXpsZoneWattage | read-only | current | The wattage information of the current zone of the external power supply. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.6 | ColumnhpicfXpsPSURev | read-only | current | This indicates the revision number of the power supply unit that resides in this zone. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.7 | ColumnhpicfXpsPSUModule | read-only | current | This indicates the J number of the power supply unit that resides in this zone. |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.8 | ColumnhpicfXpsZonePowerShareForce | read-write | current | When this option is set as true then hpicfXpsZonePowerShar will change in un-graceful manner where all low priority P devices connected to these ports will be … |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.9 | ColumnhpicfXpsZoneRecordVersion | read-only | current | Zone record version of the current zone of external power supply. This object is needed for debugging purpose when there is a difference between hpicfXpsSuppor… |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2 | NodehpicfPsConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1 | NodehpicfPsCompliance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.1 | CompliancehpicfDcPsCompliance | deprecated | The compliance statement for entries which implement the POWER SUPPLY MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.2 | CompliancehpicfXpsCompliance | current | The compliance statement for the external power supply mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.3 | CompliancehpicfXpsZoneCompliance | current | The compliance statement for the zone MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.4 | CompliancehpicfDcPsCompliance1 | current | The compliance statement for entries which implement the POWER SUPPLY MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2 | NodehpicfPsGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.1 | GrouphpicfPsGroup | deprecated | POWER SUPPLY parameters | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.2 | GrouphpicfXpsGroup | current | External power supply parameters. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.3 | GrouphpicfXpsZoneGroup | current | External power supply zone parameters | |
| 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.4 | GrouphpicfPsGroup1 | current | A collection of objects providing information about the power supply unit. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpicfDcPsIndex | Unsigned32 | current | A unique value that serves as index to identify the power supply. |
| HpicfDcPsState | INTEGER { psNotPresent(1), psNotPlugged(2), psPowered(3), psFailed(4), psPermFailure(5), psMax(6), psAuxFailure(7), psNotPowered(8), psAuxNotPowered(9) } | current | An enumerated value which provides the state of the switch power supply entity. |
| HpicfXpsConnectionStatus | INTEGER { notConnected(0), unavailable(1), available(2), active(3), mismatch(4), notReady(5), overCurrent(6), cannotPower(7), autoDisabled(8) } | current | An enumerated value which provides the state of the connection between the switch and external power supply. |
| HpicfXpsZoneStatus | INTEGER { notConnected(1), notReady(2), faulted(3), powered(4), inReset(5) } | current | An enumerated value which provides the state of the current zone of the external power supply. |