PPP-SEC-MIB
19 objects
No module-level DESCRIPTION found.
Imported Objects
| PPP-LCP-MIB | ppp |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.23.2 | NodepppSecurity | |||
| 1.3.6.1.2.1.10.23.2.1 | NodepppSecurityProtocols | |||
| 1.3.6.1.2.1.10.23.2.1.1 | NodepppSecurityPapProtocol | |||
| 1.3.6.1.2.1.10.23.2.1.2 | NodepppSecurityChapMD5Protocol | |||
| 1.3.6.1.2.1.10.23.2.2 | TablepppSecurityConfigTable | not-accessible | mandatory | Table containing the configuration and preference parameters for PPP Security. |
| 1.3.6.1.2.1.10.23.2.2.1 | RowpppSecurityConfigEntry | not-accessible | mandatory | Security configuration information for a particular PPP link. |
| 1.3.6.1.2.1.10.23.2.2.1.1 | ColumnpppSecurityConfigLink | read-write | mandatory | The value of ifIndex that identifies the entry in the interface table that is associated with the local PPP entity's link for which this particular security al… |
| 1.3.6.1.2.1.10.23.2.2.1.2 | ColumnpppSecurityConfigPreference | read-write | mandatory | The relative preference of the security protocol identified by pppSecurityConfigProtocol. Security protocols with lower values of pppSecurityConfigPreference a… |
| 1.3.6.1.2.1.10.23.2.2.1.3 | ColumnpppSecurityConfigProtocol | read-write | mandatory | Identifies the security protocol to be attempted on the link identified by pppSecurityConfigLink at the preference level identified by pppSecurityConfigPrefere… |
| 1.3.6.1.2.1.10.23.2.2.1.4 | ColumnpppSecurityConfigStatus | read-write | mandatory | Setting this object to the value invalid(1) has the effect of invalidating the corresponding entry in the pppSecurityConfigTable. It is an implementation-speci… |
| 1.3.6.1.2.1.10.23.2.3 | TablepppSecuritySecretsTable | not-accessible | mandatory | Table containing the identities and secrets used by the PPP authentication protocols. As this table contains secret information, it is expected that access to … |
| 1.3.6.1.2.1.10.23.2.3.1 | RowpppSecuritySecretsEntry | not-accessible | mandatory | Secret information. |
| 1.3.6.1.2.1.10.23.2.3.1.1 | ColumnpppSecuritySecretsLink | read-only | mandatory | The link to which this ID/Secret pair applies. By convention, if the value of this object is 0 then the ID/Secret pair applies to all links. |
| 1.3.6.1.2.1.10.23.2.3.1.2 | ColumnpppSecuritySecretsIdIndex | read-only | mandatory | A unique value for each ID/Secret pair that has been defined for use on this link. This allows multiple ID/Secret pairs to be defined for each link. How the lo… |
| 1.3.6.1.2.1.10.23.2.3.1.3 | ColumnpppSecuritySecretsDirection | read-write | mandatory | This object defines the direction in which a particular ID/Secret pair is valid. If this object is local-to-remote then the local PPP entity will use the ID/Se… |
| 1.3.6.1.2.1.10.23.2.3.1.4 | ColumnpppSecuritySecretsProtocol | read-write | mandatory | The security protocol (e.g. CHAP or PAP) to which this ID/Secret pair applies. |
| 1.3.6.1.2.1.10.23.2.3.1.5 | ColumnpppSecuritySecretsIdentity | read-write | mandatory | The Identity of the ID/Secret pair. The actual format, semantics, and use of pppSecuritySecretsIdentity depends on the actual security protocol used. For examp… |
| 1.3.6.1.2.1.10.23.2.3.1.6 | ColumnpppSecuritySecretsSecret | read-write | mandatory | The secret of the ID/Secret pair. The actual format, semantics, and use of pppSecuritySecretsSecret depends on the actual security protocol used. For example, … |
| 1.3.6.1.2.1.10.23.2.3.1.7 | ColumnpppSecuritySecretsStatus | read-write | mandatory | Setting this object to the value invalid(1) has the effect of invalidating the corresponding entry in the pppSecuritySecretsTable. It is an implementation-spec… |