PRIVATE-FESW-26-MIB
174 objects
The MIB module is for XXX Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityprivatetech | The MIB module is for XXX Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.16 | NodefeSW26ProductID | |||
| 1.3.6.1.4.1.5205.2.16.1 | NodefeSW26Produces | |||
| 1.3.6.1.4.1.5205.2.16.1.1 | NodefeSW26System | |||
| 1.3.6.1.4.1.5205.2.16.1.1.1 | NodefeSW26CommonSys | |||
| 1.3.6.1.4.1.5205.2.16.1.1.1.1 | ScalarfeSW26Reboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.5205.2.16.1.1.1.2 | ScalarfeSW26BiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.3 | ScalarfeSW26FirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.4 | ScalarfeSW26HardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.5 | ScalarfeSW26MechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.6 | ScalarfeSW26SerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.7 | ScalarfeSW26HostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.8 | ScalarfeSW26DevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.9 | ScalarfeSW26RamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.10 | ScalarfeSW26FlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.2 | NodefeSW26IP | |||
| 1.3.6.1.4.1.5205.2.16.1.1.2.1 | ScalarfeSW26DhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.16.1.1.2.2 | ScalarfeSW26IPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.16.1.1.2.3 | ScalarfeSW26NetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.16.1.1.2.4 | ScalarfeSW26DefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.16.1.1.2.5 | ScalarfeSW26DnsSetting | read-write | current | Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server… |
| 1.3.6.1.4.1.5205.2.16.1.1.2.6 | ScalarfeSW26DnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.3 | NodefeSW26Time | |||
| 1.3.6.1.4.1.5205.2.16.1.1.3.1 | ScalarfeSW26SystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.3.2 | ScalarfeSW26ManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value ran… |
| 1.3.6.1.4.1.5205.2.16.1.1.3.3 | ScalarfeSW26NTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.16.1.1.3.4 | ScalarfeSW26NTPTimeZone | read-write | current | Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - G… |
| 1.3.6.1.4.1.5205.2.16.1.1.3.5 | ScalarfeSW26NTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.5205.2.16.1.1.3.6 | ScalarfeSW26DaylightSavingTime | read-write | current | Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour) |
| 1.3.6.1.4.1.5205.2.16.1.1.3.7 | ScalarfeSW26DaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.16.1.1.3.8 | ScalarfeSW26DaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.16.1.1.4 | NodefeSW26Account | |||
| 1.3.6.1.4.1.5205.2.16.1.1.4.1 | ScalarfeSW26AccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2 | TablefeSW26AccountTable | not-accessible | current | This is a list of feSW26AccountEntry. The numbers of entries are given by the value of feSW26AccountNumber. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1 | RowfeSW26AccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.1 | ColumnfeSW26AccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.2 | ColumnfeSW26AccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.3 | ColumnfeSW26AccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.4 | ColumnfeSW26AccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.3 | ScalarfeSW26AccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.4 | ScalarfeSW26AccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.5 | ScalarfeSW26DoAccountAdd | read-write | current | Add account name. OID feSW26AccountAddName and feSW26AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.6 | ScalarfeSW26AccountDel | read-write | current | Delete account. The value is valid feSW26AccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.16.1.2 | NodefeSW26Snmp | |||
| 1.3.6.1.4.1.5205.2.16.1.2.1 | ScalarfeSW26GetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.16.1.2.2 | ScalarfeSW26SetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.16.1.2.3 | ScalarfeSW26TrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.16.1.2.4 | TablefeSW26TrapHostTable | not-accessible | current | A list of trap host entry. The numbers of entries are given by the value of feSW26TrapHostNumber. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1 | RowfeSW26TrapHostEntry | not-accessible | current | This is the entry information for trap host. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.1 | ColumnfeSW26TrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.2 | ColumnfeSW26TrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.3 | ColumnfeSW26TrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.4 | ColumnfeSW26TrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.16.1.3 | NodefeSW26Alarm | |||
| 1.3.6.1.4.1.5205.2.16.1.3.1 | NodefeSW26Event | |||
| 1.3.6.1.4.1.5205.2.16.1.3.1.1 | ScalarfeSW26EventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2 | TablefeSW26EventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of feSW26EventNumber. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1 | RowfeSW26EventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.1 | ColumnfeSW26EventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.2 | ColumnfeSW26EventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.3 | ColumnfeSW26EventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.4 | ColumnfeSW26EventSendSMS | read-write | current | Send SMS when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.5 | ColumnfeSW26EventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.16.1.3.2 | NodefeSW26Email | |||
| 1.3.6.1.4.1.5205.2.16.1.3.2.1 | ScalarfeSW26EmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.2 | ScalarfeSW26EmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.3 | ScalarfeSW26EmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.4 | ScalarfeSW26EmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.5 | TablefeSW26EmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of feSW26EmailUserNumber. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.5.1 | RowfeSW26EmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.5.1.1 | ColumnfeSW26EmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.5.1.2 | ColumnfeSW26EmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.3 | NodefeSW26SMS | |||
| 1.3.6.1.4.1.5205.2.16.1.3.3.1 | ScalarfeSW26SMSServer | read-write | current | This is the SMS server for alarm event. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.2 | ScalarfeSW26SMSUsername | read-write | current | This is the Username of SMS server. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.3 | ScalarfeSW26SMSPassword | read-write | current | This is the Password of SMS server. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.4 | ScalarfeSW26SMSUserNumber | read-only | current | The number of the SMS users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.5 | TablefeSW26SMSUserTable | not-accessible | current | This is a list of SMS user entry. The numbers of entries are given by the value of feSW26SMSUserNumber. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.5.1 | RowfeSW26SMSUserEntry | not-accessible | current | This is the Entry information for SMS user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.5.1.1 | ColumnfeSW26SMSUserIndex | read-only | current | This is the index of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.3.5.1.2 | ColumnfeSW26SMSUserMobilePhone | read-write | current | The SMS phone number of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.16.1.4 | NodefeSW26Tftp | |||
| 1.3.6.1.4.1.5205.2.16.1.4.1 | ScalarfeSW26TftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.16.1.5 | NodefeSW26Configuration | |||
| 1.3.6.1.4.1.5205.2.16.1.5.1 | NodefeSW26SaveRestore | |||
| 1.3.6.1.4.1.5205.2.16.1.5.1.1 | ScalarfeSW26SaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.5.1.2 | ScalarfeSW26SaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.5.1.3 | ScalarfeSW26RestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c… |
| 1.3.6.1.4.1.5205.2.16.1.5.1.4 | ScalarfeSW26RestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.5.2 | NodefeSW26ConfigFile | |||
| 1.3.6.1.4.1.5205.2.16.1.5.2.1 | ScalarfeSW26ExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.5205.2.16.1.5.2.2 | ScalarfeSW26DoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section. |
| 1.3.6.1.4.1.5205.2.16.1.5.2.3 | ScalarfeSW26ImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.16.1.5.2.4 | ScalarfeSW26DoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section. |
| 1.3.6.1.4.1.5205.2.16.1.6 | NodefeSW26Diagnostic | |||
| 1.3.6.1.4.1.5205.2.16.1.6.1 | ScalarfeSW26EEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.16.1.6.2 | ScalarfeSW26UartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.16.1.6.3 | ScalarfeSW26DramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.16.1.6.4 | ScalarfeSW26FlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.16.1.6.5 | ScalarfeSW26InternalLoopbackTest | read-only | current | Internal loop back test. |
| 1.3.6.1.4.1.5205.2.16.1.6.6 | ScalarfeSW26ExternalLoopbackTest | read-only | current | External loop back test. |
| 1.3.6.1.4.1.5205.2.16.1.6.7 | ScalarfeSW26PingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.16.1.7 | NodefeSW26Log | |||
| 1.3.6.1.4.1.5205.2.16.1.7.1 | ScalarfeSW26ClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.7.2 | ScalarfeSW26UploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.5205.2.16.1.7.3 | ScalarfeSW26AutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.5205.2.16.1.7.4 | ScalarfeSW26LogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.16.1.7.5 | TablefeSW26LogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of feSW26LogNumber. |
| 1.3.6.1.4.1.5205.2.16.1.7.5.1 | RowfeSW26LogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.5205.2.16.1.7.5.1.1 | ColumnfeSW26LogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.5205.2.16.1.7.5.1.2 | ColumnfeSW26LogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.16.1.8 | NodefeSW26Firmware | |||
| 1.3.6.1.4.1.5205.2.16.1.8.1 | ScalarfeSW26FirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.16.1.8.2 | ScalarfeSW26DoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.9 | NodefeSW26Port | |||
| 1.3.6.1.4.1.5205.2.16.1.9.1 | NodefeSW26PortStatus | |||
| 1.3.6.1.4.1.5205.2.16.1.9.1.1 | ScalarfeSW26PortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2 | TablefeSW26PortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of feSW26PortStatusNumber. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1 | RowfeSW26PortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.1 | ColumnfeSW26PortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.2 | ColumnfeSW26PortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.3 | ColumnfeSW26PortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.4 | ColumnfeSW26PortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.5 | ColumnfeSW26PortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.6 | ColumnfeSW26PortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.7 | ColumnfeSW26PortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.8 | ColumnfeSW26PortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.9 | ColumnfeSW26PortStatuDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.16.1.9.2 | NodefeSW26PortConf | |||
| 1.3.6.1.4.1.5205.2.16.1.9.2.1 | ScalarfeSW26PortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2 | TablefeSW26PortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of feSW26PortConfNumber. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1 | RowfeSW26PortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.1 | ColumnfeSW26PortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.2 | ColumnfeSW26PortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.3 | ColumnfeSW26PortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.4 | ColumnfeSW26PortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.5 | ColumnfeSW26PortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.16.1.10 | NodefeSW26LoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.16.1.10.1 | ScalarfeSW26LoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.16.1.10.2 | TablefeSW26LoopDetectedTable | not-accessible | current | A list of loop detected entry. The numbers of entries are given by the value of feSW26LoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1 | RowfeSW26LoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.1 | ColumnfeSW26LoopDetectedfIndex | read-only | current | The index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.2 | ColumnfeSW26LoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.3 | ColumnfeSW26LoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - unlocked 1 - Locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.4 | ColumnfeSW26LoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.10.3 | ScalarfeSW26LoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.20 | NodefeSW26TrapEntry | |||
| 1.3.6.1.4.1.5205.2.16.1.20.1 | NotificationfeSW26ModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.2 | NotificationfeSW26ModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.3 | NotificationfeSW26DualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.5 | NotificationfeSW26LoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.100 | NotificationfeSW26StpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.101 | NotificationfeSW26StpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.102 | NotificationfeSW26StpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.5205.2.16.1.20.110 | NotificationfeSW26RmonRisingAlarm | current | Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin… | |
| 1.3.6.1.4.1.5205.2.16.1.20.111 | NotificationfeSW26RmonFallingAlarm | current | Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its … | |
| 1.3.6.1.4.1.5205.2.16.1.20.120 | NotificationfeSW26LacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.16.1.20.121 | NotificationfeSW26LacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.16.1.20.123 | NotificationfeSW26LacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.16.1.20.124 | NotificationfeSW26LacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.16.1.20.140 | NotificationfeSW26GvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.141 | NotificationfeSW26GvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.151 | NotificationfeSW26VlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.16.1.20.152 | NotificationfeSW26VlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.16.1.20.153 | NotificationfeSW26VlanMetroBaseEnabled | current | Send the trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.5205.2.16.1.20.200 | NotificationfeSW26UserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.16.1.20.201 | NotificationfeSW26UserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.16.1.21 | NodefeSW26TrapVariable | |||
| 1.3.6.1.4.1.5205.2.16.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.16.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.16.1.21.3 | Scalaractorkey | read-only | current | This is the actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.16.1.21.4 | Scalarpartnerkey | read-only | current | This is the partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.16.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |