PRIVATE-SW0657840-MIB
216 objects
The MIB module is for xxx Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityprivatetech | The MIB module is for xxx Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.9 | Nodesw0657840ProductID | |||
| 1.3.6.1.4.1.5205.2.9.1 | Nodesw0657840Produces | |||
| 1.3.6.1.4.1.5205.2.9.1.1 | Nodesw0657840System | |||
| 1.3.6.1.4.1.5205.2.9.1.1.1 | Nodesw0657840CommonSys | |||
| 1.3.6.1.4.1.5205.2.9.1.1.1.1 | Scalarsw0657840Reboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.5205.2.9.1.1.1.2 | Scalarsw0657840BiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.3 | Scalarsw0657840FirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.4 | Scalarsw0657840HardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.5 | Scalarsw0657840MechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.6 | Scalarsw0657840SerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.7 | Scalarsw0657840HostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.8 | Scalarsw0657840DevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.9 | Scalarsw0657840RamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.1.10 | Scalarsw0657840FlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.2 | Nodesw0657840IP | |||
| 1.3.6.1.4.1.5205.2.9.1.1.2.1 | Scalarsw0657840DhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.9.1.1.2.2 | Scalarsw0657840IPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.9.1.1.2.3 | Scalarsw0657840NetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.9.1.1.2.4 | Scalarsw0657840DefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.9.1.1.2.5 | Scalarsw0657840DnsSetting | read-write | current | Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server… |
| 1.3.6.1.4.1.5205.2.9.1.1.2.6 | Scalarsw0657840DnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.3 | Nodesw0657840Time | |||
| 1.3.6.1.4.1.5205.2.9.1.1.3.1 | Scalarsw0657840SystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.3.2 | Scalarsw0657840ManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value ran… |
| 1.3.6.1.4.1.5205.2.9.1.1.3.3 | Scalarsw0657840NTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.9.1.1.3.4 | Scalarsw0657840NTPTimeZone | read-write | current | Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - G… |
| 1.3.6.1.4.1.5205.2.9.1.1.3.5 | Scalarsw0657840NTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.5205.2.9.1.1.3.6 | Scalarsw0657840DaylightSavingTime | read-write | current | Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour) |
| 1.3.6.1.4.1.5205.2.9.1.1.3.7 | Scalarsw0657840DaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.9.1.1.3.8 | Scalarsw0657840DaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.9.1.1.4 | Nodesw0657840Account | |||
| 1.3.6.1.4.1.5205.2.9.1.1.4.1 | Scalarsw0657840AccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.2 | Tablesw0657840AccountTable | not-accessible | current | This is a list of SW0657840AccountEntry. The numbers of entries are given by the value of sw0657840AccountNumber. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.2.1 | Rowsw0657840AccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.2.1.1 | Columnsw0657840AccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.2.1.2 | Columnsw0657840AccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.2.1.3 | Columnsw0657840AccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.2.1.4 | Columnsw0657840AccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.3 | Scalarsw0657840AccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.4 | Scalarsw0657840AccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.9.1.1.4.5 | Scalarsw0657840DoAccountAdd | read-write | current | Add account name. OID sw0657840AccountAddName and sw0657840AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do no… |
| 1.3.6.1.4.1.5205.2.9.1.1.4.6 | Scalarsw0657840AccountDel | read-write | current | Delete account. The value is valid sw0657840AccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.9.1.2 | Nodesw0657840Snmp | |||
| 1.3.6.1.4.1.5205.2.9.1.2.1 | Scalarsw0657840GetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.9.1.2.2 | Scalarsw0657840SetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.9.1.2.3 | Scalarsw0657840TrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.9.1.2.4 | Tablesw0657840TrapHostTable | not-accessible | current | A list of trap host entry. The numbers of entries are given by the value of sw0657840TrapHostNumber. |
| 1.3.6.1.4.1.5205.2.9.1.2.4.1 | Rowsw0657840TrapHostEntry | not-accessible | current | This is the entry information for trap host. |
| 1.3.6.1.4.1.5205.2.9.1.2.4.1.1 | Columnsw0657840TrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.9.1.2.4.1.2 | Columnsw0657840TrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.9.1.2.4.1.3 | Columnsw0657840TrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.9.1.2.4.1.4 | Columnsw0657840TrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.9.1.3 | Nodesw0657840Alarm | |||
| 1.3.6.1.4.1.5205.2.9.1.3.1 | Nodesw0657840Event | |||
| 1.3.6.1.4.1.5205.2.9.1.3.1.1 | Scalarsw0657840EventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2 | Tablesw0657840EventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of sw0657840EventNumber. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2.1 | Rowsw0657840EventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2.1.1 | Columnsw0657840EventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2.1.2 | Columnsw0657840EventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2.1.3 | Columnsw0657840EventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2.1.4 | Columnsw0657840EventSendSMS | read-write | current | Send SMS when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.9.1.3.1.2.1.5 | Columnsw0657840EventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.9.1.3.2 | Nodesw0657840Email | |||
| 1.3.6.1.4.1.5205.2.9.1.3.2.1 | Scalarsw0657840EmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.2 | Scalarsw0657840EmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.3 | Scalarsw0657840EmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.4 | Scalarsw0657840EmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.5 | Tablesw0657840EmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of sw0657840EmailUserNumber. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.5.1 | Rowsw0657840EmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.5.1.1 | Columnsw0657840EmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.5205.2.9.1.3.2.5.1.2 | Columnsw0657840EmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.9.1.3.3 | Nodesw0657840SMS | |||
| 1.3.6.1.4.1.5205.2.9.1.3.3.1 | Scalarsw0657840SMSServer | read-write | current | This is the SMS server for alarm event. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.2 | Scalarsw0657840SMSUsername | read-write | current | This is the Username of SMS server. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.3 | Scalarsw0657840SMSPassword | read-write | current | This is the Password of SMS server. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.4 | Scalarsw0657840SMSUserNumber | read-only | current | The number of the SMS users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.5 | Tablesw0657840SMSUserTable | not-accessible | current | This is a list of SMS user entry. The numbers of entries are given by the value of sw0657840SMSUserNumber. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.5.1 | Rowsw0657840SMSUserEntry | not-accessible | current | This is the Entry information for SMS user entry. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.5.1.1 | Columnsw0657840SMSUserIndex | read-only | current | This is the index of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.9.1.3.3.5.1.2 | Columnsw0657840SMSUserMobilePhone | read-write | current | The SMS phone number of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.9.1.4 | Nodesw0657840Tftp | |||
| 1.3.6.1.4.1.5205.2.9.1.4.1 | Scalarsw0657840TftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.9.1.5 | Nodesw0657840Configuration | |||
| 1.3.6.1.4.1.5205.2.9.1.5.1 | Nodesw0657840SaveRestore | |||
| 1.3.6.1.4.1.5205.2.9.1.5.1.1 | Scalarsw0657840SaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.5.1.2 | Scalarsw0657840SaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.5.1.3 | Scalarsw0657840RestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing c… |
| 1.3.6.1.4.1.5205.2.9.1.5.1.4 | Scalarsw0657840RestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.5.2 | Nodesw0657840ConfigFile | |||
| 1.3.6.1.4.1.5205.2.9.1.5.2.1 | Scalarsw0657840ExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.5205.2.9.1.5.2.2 | Scalarsw0657840DoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - export start section. 2 - export user-conf section. |
| 1.3.6.1.4.1.5205.2.9.1.5.2.3 | Scalarsw0657840ImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.9.1.5.2.4 | Scalarsw0657840DoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - import start section. 2 - import user-conf section. |
| 1.3.6.1.4.1.5205.2.9.1.6 | Nodesw0657840Diagnostic | |||
| 1.3.6.1.4.1.5205.2.9.1.6.1 | Scalarsw0657840EEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.9.1.6.2 | Scalarsw0657840UartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.9.1.6.3 | Scalarsw0657840DramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.9.1.6.4 | Scalarsw0657840FlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.9.1.6.5 | Scalarsw0657840InternalLoopbackTest | read-only | current | Internal loopback test. |
| 1.3.6.1.4.1.5205.2.9.1.6.6 | Scalarsw0657840ExternalLoopbackTest | read-only | current | External loopback test. |
| 1.3.6.1.4.1.5205.2.9.1.6.7 | Scalarsw0657840PingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.9.1.7 | Nodesw0657840Log | |||
| 1.3.6.1.4.1.5205.2.9.1.7.1 | Scalarsw0657840ClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.7.2 | Scalarsw0657840UploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.5205.2.9.1.7.3 | Scalarsw0657840AutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.5205.2.9.1.7.4 | Scalarsw0657840LogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.9.1.7.5 | Tablesw0657840LogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of sw0657840LogNumber. |
| 1.3.6.1.4.1.5205.2.9.1.7.5.1 | Rowsw0657840LogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.5205.2.9.1.7.5.1.1 | Columnsw0657840LogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.5205.2.9.1.7.5.1.2 | Columnsw0657840LogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.9.1.8 | Nodesw0657840Firmware | |||
| 1.3.6.1.4.1.5205.2.9.1.8.1 | Scalarsw0657840FirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.9.1.8.2 | Scalarsw0657840DoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.9 | Nodesw0657840Port | |||
| 1.3.6.1.4.1.5205.2.9.1.9.1 | Nodesw0657840PortStatus | |||
| 1.3.6.1.4.1.5205.2.9.1.9.1.1 | Scalarsw0657840PortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2 | Tablesw0657840PortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of sw0657840PortStatusNumber. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1 | Rowsw0657840PortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.1 | Columnsw0657840PortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.2 | Columnsw0657840PortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.3 | Columnsw0657840PortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.4 | Columnsw0657840PortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.5 | Columnsw0657840PortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.6 | Columnsw0657840PortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.7 | Columnsw0657840PortStatusFlwCtrl | read-only | current | This is the flow control of the port status entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.1.2.1.8 | Columnsw0657840PortStatuDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.9.1.9.2 | Nodesw0657840PortConf | |||
| 1.3.6.1.4.1.5205.2.9.1.9.2.1 | Scalarsw0657840PortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2 | Tablesw0657840PortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of sw0657840PortConfNumber. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2.1 | Rowsw0657840PortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2.1.1 | Columnsw0657840PortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2.1.2 | Columnsw0657840PortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2.1.3 | Columnsw0657840PortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2.1.4 | Columnsw0657840PortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.9.1.9.2.2.1.5 | Columnsw0657840PortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.9.1.10 | Nodesw0657840Mirror | |||
| 1.3.6.1.4.1.5205.2.9.1.10.1 | Scalarsw0657840MirrorMode | read-write | current | Get/Set the Mirror mode. 0 - disabled. 1 - rx enable. |
| 1.3.6.1.4.1.5205.2.9.1.10.2 | Scalarsw0657840MirroringPort | read-write | current | Get/Set the mirroring port. The port range is from 1 to 24. |
| 1.3.6.1.4.1.5205.2.9.1.10.3 | Scalarsw0657840MirroredPorts | read-write | current | Get/Set the monitored ports. The port range is from 1 to 24, and the syntax is 1,5-7. |
| 1.3.6.1.4.1.5205.2.9.1.11 | Nodesw0657840MaxPktLen | |||
| 1.3.6.1.4.1.5205.2.9.1.11.1 | Nodesw0657840MaxPktLen1 | |||
| 1.3.6.1.4.1.5205.2.9.1.11.1.1 | Scalarsw0657840MaxPktLenPortNumber | read-only | current | Get the number of Max. packet length. |
| 1.3.6.1.4.1.5205.2.9.1.11.1.2 | Tablesw0657840MaxPktLenConfTable | not-accessible | current | This is a list of Max. packet length entry. The numbers of entries are given by the value of sw0657840MaxPktLenPortNumber. |
| 1.3.6.1.4.1.5205.2.9.1.11.1.2.1 | Rowsw0657840MaxPktLenConfEntry | not-accessible | current | Entry(s) for Max. packet length information. |
| 1.3.6.1.4.1.5205.2.9.1.11.1.2.1.1 | Columnsw0657840MaxPktLenConfIndex | read-only | current | This is the index of the Max. packet length entry. |
| 1.3.6.1.4.1.5205.2.9.1.11.1.2.1.2 | Columnsw0657840MaxPktLenConfSetting | read-write | current | Get/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216. |
| 1.3.6.1.4.1.5205.2.9.1.12 | Nodesw0657840Bandwidth | |||
| 1.3.6.1.4.1.5205.2.9.1.12.1 | Nodesw0657840Bandwidth1 | |||
| 1.3.6.1.4.1.5205.2.9.1.12.1.1 | Scalarsw0657840BandwidthPortNumber | read-only | current | Get the number of bandwidth management configuration. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2 | Tablesw0657840BandwidthConfTable | not-accessible | current | This is a list of bandwidth management configuration entry. The numbers of entries are given by the value of sw0657840BandwidthPortNumber. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1 | Rowsw0657840BandwidthConfEntry | not-accessible | current | This is the Entry(s) for bandwidth management configuration information. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.1 | Columnsw0657840BandwidthConfIndex | read-only | current | This is the index of the bandwidth management configuration entry. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.2 | Columnsw0657840BandwidthConfIngressState | read-write | current | The ingress state of the bandwidth management configures entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.3 | Columnsw0657840BandwidthConfIngressBW | read-write | current | Get/Set the ingress rate of the bandwidth management configuration. The ingress rate is from 0 to 1000. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.4 | Columnsw0657840BandwidthConfStormState | read-write | current | The storm state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.5 | Columnsw0657840BandwidthConfStormBW | read-write | current | Get/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.6 | Columnsw0657840BandwidthConfEgressState | read-write | current | The egress state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.9.1.12.1.2.1.7 | Columnsw0657840BandwidthConfEgressBW | read-write | current | Get/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000. |
| 1.3.6.1.4.1.5205.2.9.1.13 | Nodesw0657840LoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.9.1.13.1 | Scalarsw0657840LoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.9.1.13.2 | Tablesw0657840LoopDetectedTable | not-accessible | current | A list of loop detected entry. The numbers of entries are given by the value of sw0657840LoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.9.1.13.2.1 | Rowsw0657840LoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.9.1.13.2.1.1 | Columnsw0657840LoopDetectedfIndex | read-only | current | The index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.9.1.13.2.1.2 | Columnsw0657840LoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.9.1.13.2.1.3 | Columnsw0657840LoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.9.1.13.2.1.4 | Columnsw0657840LoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.13.3 | Scalarsw0657840LoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.9.1.14 | Nodesw0657840SFPInfo | |||
| 1.3.6.1.4.1.5205.2.9.1.14.1 | Scalarsw0657840SFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.5205.2.9.1.14.2 | Tablesw0657840SFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of sw0657840SFPInfoNumber. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1 | Rowsw0657840SFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.1 | Columnsw0657840SFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.2 | Columnsw0657840SFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.3 | Columnsw0657840SFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.4 | Columnsw0657840SFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.5 | Columnsw0657840SFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.6 | Columnsw0657840SFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.7 | Columnsw0657840SFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.8 | Columnsw0657840SFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.9 | Columnsw0657840SFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.10 | Columnsw0657840SFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.11 | Columnsw0657840SFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.12 | Columnsw0657840SFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.13 | Columnsw0657840SFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.14 | Columnsw0657840SFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.15 | Columnsw0657840SFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.14.2.1.16 | Columnsw0657840SFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.5205.2.9.1.20 | Nodesw0657840TrapEntry | |||
| 1.3.6.1.4.1.5205.2.9.1.20.1 | Notificationsw0657840ModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.9.1.20.2 | Notificationsw0657840ModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.9.1.20.3 | Notificationsw0657840DualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.9.1.20.5 | Notificationsw0657840LoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.9.1.20.100 | Notificationsw0657840StpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.9.1.20.101 | Notificationsw0657840StpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.9.1.20.102 | Notificationsw0657840StpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.5205.2.9.1.20.120 | Notificationsw0657840LacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.9.1.20.121 | Notificationsw0657840LacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.9.1.20.123 | Notificationsw0657840LacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.9.1.20.124 | Notificationsw0657840LacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.9.1.20.140 | Notificationsw0657840GvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.9.1.20.141 | Notificationsw0657840GvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.9.1.20.150 | Notificationsw0657840VlanStateDisabled | current | Send the trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID. | |
| 1.3.6.1.4.1.5205.2.9.1.20.151 | Notificationsw0657840VlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.9.1.20.152 | Notificationsw0657840VlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.9.1.20.153 | Notificationsw0657840VlanMetroModeEnabled | current | Send the trap when the operational state of vlan is changed to Metro-mode vlan. The OID value means the uplink port with this metro-mode vlan. | |
| 1.3.6.1.4.1.5205.2.9.1.20.154 | Notificationsw0657840VlanDoubleTagEnabled | current | Send the trap when the operational state of vlan is changed to Double-tag vlan. | |
| 1.3.6.1.4.1.5205.2.9.1.20.200 | Notificationsw0657840UserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.9.1.20.201 | Notificationsw0657840UserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.9.1.21 | Nodesw0657840TrapVariable | |||
| 1.3.6.1.4.1.5205.2.9.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.9.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.9.1.21.3 | Scalaractorkey | read-only | current | This is the actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.9.1.21.4 | Scalarpartnerkey | read-only | current | This is the partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.9.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |