PRIVATETECH-GEL2ESW10G-MIB
696 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | MacAddress |
| INET-ADDRESS-MIB | InetAddress |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityprivatetech | |||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.51 | Nodegel2esw10gProductId | |||
| 1.3.6.1.4.1.5205.2.51.1 | Nodegel2esw10gSystem | |||
| 1.3.6.1.4.1.5205.2.51.1.1 | Nodegel2esw10gSystemInformation | |||
| 1.3.6.1.4.1.5205.2.51.1.1.1 | Scalargel2esw10gModelName | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.2 | Scalargel2esw10gBIOSVersion | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.3 | Scalargel2esw10gFirmwareVersion | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.4 | Scalargel2esw10gHardwareMechanicalVersion | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.5 | Scalargel2esw10gSeriesNumber | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.6 | Scalargel2esw10gHostMACAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.7 | Scalargel2esw10gConsoleBaudrate | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.8 | Scalargel2esw10gRAMSize | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.9 | Scalargel2esw10gFlashSize | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.10 | Scalargel2esw10gBridgeFBDSize | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.11 | Scalargel2esw10gTransmitQueue | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.12 | Scalargel2esw10gMaximumFrameSize | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.1.13 | Scalargel2esw10gCPULoad | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.2 | Nodegel2esw10gSystemTime | |||
| 1.3.6.1.4.1.5205.2.51.1.2.1 | Nodegel2esw10gSystemTimeManual | |||
| 1.3.6.1.4.1.5205.2.51.1.2.1.1 | Scalargel2esw10gSystemTimeManualClockSource | read-write | current | default: 0, 0 : Use Local Settings, 1 : Use NTP Server. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.2 | Scalargel2esw10gSystemTimeManualLocaltime | read-write | current | Get/Set the system time of the device. The input format is 'Year-Month-Day Hour:Minute:Second'. ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 . The value r… |
| 1.3.6.1.4.1.5205.2.51.1.2.1.3 | Scalargel2esw10gSystemTimeManualTimeZoneOffset | read-write | current | Get/Set the NTP Time Zone. The value range is between -720 and 780 (minutes). |
| 1.3.6.1.4.1.5205.2.51.1.2.1.4 | Scalargel2esw10gSystemTimeManualDaylightSavings | read-write | current | default: 0, 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.5 | Scalargel2esw10gSystemTimeManualTimeSetOffset | read-write | current | Get/Set the Daylight Saving Time. The value range is between 1 and 1440 (minutes), Default : 60 (minutes). |
| 1.3.6.1.4.1.5205.2.51.1.2.1.6 | Scalargel2esw10gSystemTimeManualDaylightSavingsType | read-write | current | default: 0, 0 : By dates, 1 : Recurring. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.7 | Scalargel2esw10gSystemTimeManualDaylightSavingsBydatesFrom | read-write | current | Get/Set the Start time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value … |
| 1.3.6.1.4.1.5205.2.51.1.2.1.8 | Scalargel2esw10gSystemTimeManualDaylightSavingsBydatesTo | read-write | current | Get/Set the End time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value ra… |
| 1.3.6.1.4.1.5205.2.51.1.2.1.9 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringDayFrom | read-write | current | Get/Set the Daylight Saving Time Day From. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.10 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringWeekFrom | read-write | current | Get/Set the Daylight Saving Time Week From. 1 : first week, 2, 3, 4, 5 : last week |
| 1.3.6.1.4.1.5205.2.51.1.2.1.11 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringMonthFrom | read-write | current | Get/Set the Daylight Saving Time Month From. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.12 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringTimeFrom | read-write | current | Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.13 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringDayTo | read-write | current | Get/Set the Daylight Saving Time Day To. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.14 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringWeekTo | read-write | current | Get/Set the Daylight Saving Time Week To. 1 : first week, 2, 3, 4, 5 : last week |
| 1.3.6.1.4.1.5205.2.51.1.2.1.15 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringMonthTo | read-write | current | Get/Set the Daylight Saving Time Month To. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec. |
| 1.3.6.1.4.1.5205.2.51.1.2.1.16 | Scalargel2esw10gSystemTimeManualDaylightSavingsRecurringTimeTo | read-write | current | Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59. |
| 1.3.6.1.4.1.5205.2.51.1.2.2 | Nodegel2esw10gSystemTimeNTP | |||
| 1.3.6.1.4.1.5205.2.51.1.2.2.1 | Tablegel2esw10gSystemTimeNTPTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.2.2.1.1 | Rowgel2esw10gSystemTimeNTPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.2.2.1.1.1 | Columngel2esw10gSystemTimeNTPIndex | not-accessible | current | The index of the ntp entry. |
| 1.3.6.1.4.1.5205.2.51.1.2.2.1.1.2 | Columngel2esw10gSystemTimeNTPServerIPType | read-write | current | Default: 0, 0 : IPv4, 1 : IPv6. |
| 1.3.6.1.4.1.5205.2.51.1.2.2.1.1.3 | Columngel2esw10gSystemTimeNTPServer | read-write | current | Get/Set the NTP Time Server1. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.51.1.2.2.1.1.4 | Columngel2esw10gSystemTimeNTPCurrentMode | read-write | current | 0: Empty 1: Active 2: Edit 3: Delete |
| 1.3.6.1.4.1.5205.2.51.1.3 | Nodegel2esw10gSystemAccount | |||
| 1.3.6.1.4.1.5205.2.51.1.3.1 | Nodegel2esw10gSystemAccountUsers | |||
| 1.3.6.1.4.1.5205.2.51.1.3.1.1 | Scalargel2esw10gSystemAccountUserCreate | read-write | current | default: 0 0 : None (read only) 1 : Create a user account |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2 | Tablegel2esw10gSystemAccountUsersTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2.1 | Rowgel2esw10gSystemAccountUsersEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2.1.1 | Columngel2esw10gUserIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2.1.2 | Columngel2esw10gUserName | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2.1.3 | Columngel2esw10gPassword | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2.1.4 | Columngel2esw10gUserPrivilegeLevel | read-write | current | default:1 User privilege level range : 1 - 15 |
| 1.3.6.1.4.1.5205.2.51.1.3.1.2.1.5 | Columngel2esw10gAccountUserRowStatus | read-write | current | 1: active 2: notInservice 3: edit 4: destroy 5: undo |
| 1.3.6.1.4.1.5205.2.51.1.3.2 | Nodegel2esw10gSystemAccountPrivilegeLevel | |||
| 1.3.6.1.4.1.5205.2.51.1.3.2.1 | Scalargel2esw10gAccountPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.2 | Scalargel2esw10gAggregationPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.3 | Scalargel2esw10gDiagnosticsPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.4 | Scalargel2esw10gEEEPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.5 | Scalargel2esw10gEasyportPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.6 | Scalargel2esw10gGARPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.7 | Scalargel2esw10gGVRPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.8 | Scalargel2esw10gIPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.9 | Scalargel2esw10gIPMCSnoopingPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.10 | Scalargel2esw10gLACPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.11 | Scalargel2esw10gLLDPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.12 | Scalargel2esw10gLLDPMEDPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.13 | Scalargel2esw10gMACTablePrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.14 | Scalargel2esw10gMRPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.15 | Scalargel2esw10gMVRPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.16 | Scalargel2esw10gMVRPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.17 | Scalargel2esw10gMaintenancePrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.18 | Scalargel2esw10gMirroringPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.19 | Scalargel2esw10gPortsPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.20 | Scalargel2esw10gPrivateVLANsPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.21 | Scalargel2esw10gQoSPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.22 | Scalargel2esw10gSMTPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.23 | Scalargel2esw10gSNMPPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.24 | Scalargel2esw10gSecurityPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.25 | Scalargel2esw10gSpanningTreePrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.26 | Scalargel2esw10gSystemPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.27 | Scalargel2esw10gTrapEventPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.28 | Scalargel2esw10gVCLPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.29 | Scalargel2esw10gVLANsPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.3.2.30 | Scalargel2esw10gVoiceVLANPrivilegeLevel | read-write | current | default:10 |
| 1.3.6.1.4.1.5205.2.51.1.4 | Nodegel2esw10gIP | |||
| 1.3.6.1.4.1.5205.2.51.1.4.1 | Nodegel2esw10gIPv4 | |||
| 1.3.6.1.4.1.5205.2.51.1.4.1.1 | Nodegel2esw10gIPv4Configured | |||
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.1 | Scalargel2esw10gIpv4DHCPClient | read-write | current | default:0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.2 | Scalargel2esw10gIPv4Address | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.3 | Scalargel2esw10gIPv4Mask | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.4 | Scalargel2esw10gIPv4Router | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.5 | Scalargel2esw10gIPv4VLANId | read-write | current | default:1 |
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.6 | Scalargel2esw10gIPv4DNSServer | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.1.7 | Scalargel2esw10gIPv4DNSProxy | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.2 | Nodegel2esw10gIPv4Current | |||
| 1.3.6.1.4.1.5205.2.51.1.4.1.2.1 | Scalargel2esw10gIpv4CurrentDHCPClient | read-write | current | default:0 0: none (for read) 1: renew |
| 1.3.6.1.4.1.5205.2.51.1.4.1.2.2 | Scalargel2esw10gIPv4CurrentAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.2.3 | Scalargel2esw10gIPv4CurrentMask | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.2.4 | Scalargel2esw10gIPv4CurrentRouter | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.1.2.5 | Scalargel2esw10gIPv4CurrentVLANId | read-only | current | default:1 |
| 1.3.6.1.4.1.5205.2.51.1.4.1.2.6 | Scalargel2esw10gIPv4CurrentDNSServer | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.2 | Nodegel2esw10gIPv6 | |||
| 1.3.6.1.4.1.5205.2.51.1.4.2.1 | Nodegel2esw10gIPv6Configured | |||
| 1.3.6.1.4.1.5205.2.51.1.4.2.1.1 | Scalargel2esw10gIpv6AutoConfiguration | read-write | current | default:0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.1.4.2.1.2 | Scalargel2esw10gIpv6Address | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.2.1.3 | Scalargel2esw10gIpv6Prefix | read-write | current | default: 96 |
| 1.3.6.1.4.1.5205.2.51.1.4.2.1.4 | Scalargel2esw10gIpv6Router | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.2.2 | Nodegel2esw10gIPv6Current | |||
| 1.3.6.1.4.1.5205.2.51.1.4.2.2.1 | Scalargel2esw10gIpv6CurrentAutoConfiguration | read-only | current | default:0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.1.4.2.2.2 | Scalargel2esw10gIpv6CurrentAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.2.2.3 | Scalargel2esw10gIpv6CurrentLinkLocalAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.2.2.4 | Scalargel2esw10gIpv6CurrentPrefix | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.4.2.2.5 | Scalargel2esw10gIpv6CurrentRouter | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.5 | Nodegel2esw10gSyslog | |||
| 1.3.6.1.4.1.5205.2.51.1.5.1 | Nodegel2esw10gSyslogConf | |||
| 1.3.6.1.4.1.5205.2.51.1.5.1.1 | Scalargel2esw10gServerMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.1.5.1.2 | Scalargel2esw10gServerAddress1 | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.1.3 | Scalargel2esw10gServerAddress2 | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.1.4 | Scalargel2esw10gSyslogLevel | read-write | current | default: 6 (Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.1.5.2 | Nodegel2esw10gSyslogDetailedInfo | |||
| 1.3.6.1.4.1.5205.2.51.1.5.2.1 | Scalargel2esw10gSyslogDetailedInfoClear | read-write | current | default: 0 0 : None (read only) 1 : Clear Syslog |
| 1.3.6.1.4.1.5205.2.51.1.5.2.2 | Tablegel2esw10gSyslogDetailedInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.2.2.1 | Rowgel2esw10gSyslogDetailedInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.2.2.1.1 | Columngel2esw10gSyslogDetailedInfoIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.2.2.1.2 | Columngel2esw10gSyslogDetailedInfoLevel | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.2.2.1.3 | Columngel2esw10gSyslogDetailedInfoTime | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.5.2.2.1.4 | Columngel2esw10gSyslogDetailedInfoMessage | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.1.6 | Nodegel2esw10gSnmp | |||
| 1.3.6.1.4.1.5205.2.51.1.6.1 | Nodegel2esw10gSnmpConf | |||
| 1.3.6.1.4.1.5205.2.51.1.6.1.1 | Scalargel2esw10gGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.2 | Scalargel2esw10gSetCommunityMode | read-write | current | Get/Set the set-community mode of the SNMP. default : 1, 0: disable, 1: enable. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.3 | Scalargel2esw10gSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4 | Tablegel2esw10gTrapHostConfTable | not-accessible | current | A list of trap host entry. The numbers of entries are given by the value of gel2esw10gTrapHostConfNumber. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1 | Rowgel2esw10gTrapHostConfEntry | not-accessible | current | This is the entry information for trap host. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.1 | Columngel2esw10gTrapHostConfIndex | not-accessible | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.2 | Columngel2esw10gTrapHostConfVersion | read-write | current | The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3) |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.3 | Columngel2esw10gTrapHostConfIPType | read-write | current | Server IP Type. Default: 4, 4 : IPv4, 6 : IPv6. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.4 | Columngel2esw10gTrapHostConfIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.5 | Columngel2esw10gTrapHostConfPort | read-write | current | This is the receiving-port number of the trap host. range : 1 - 65535. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.6 | Columngel2esw10gTrapHostConfCommunity | read-write | current | The community/security name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.7 | Columngel2esw10gTrapHostConfSeverityLevel | read-write | current | The Severity Level. 0 : Emerg, 1 : Alert, 2 : Crit, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.8 | Columngel2esw10gTrapHostConfSecurityLevel | read-write | current | The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. 1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automa… |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.9 | Columngel2esw10gTrapHostConfAuthPtc | read-write | current | Authentication Protocol, there are SHA and MD5 supported presently. 1 : MD5, 2 : SHA. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.10 | Columngel2esw10gTrapHostConfAuthPassword | read-write | current | Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password shoul… |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.11 | Columngel2esw10gTrapHostConfPrivPtc | read-write | current | This is the Privacy Protocol, which is used in AuthPriv. Only supports DES. An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.12 | Columngel2esw10gTrapHostConfPrivPassword | read-write | current | The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters. |
| 1.3.6.1.4.1.5205.2.51.1.6.1.4.1.13 | Columngel2esw10gTrapHostConfCurrentMode | read-write | current | 0:Empty, 1:Active mode, 2:Edit mode, 3:Delete. |
| 1.3.6.1.4.1.5205.2.51.2 | Nodegel2esw10gConfiguration | |||
| 1.3.6.1.4.1.5205.2.51.2.1 | Nodegel2esw10gPort | |||
| 1.3.6.1.4.1.5205.2.51.2.1.1 | Tablegel2esw10gPortConfigurationTable | not-accessible | current | Show port configurations. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1 | Rowgel2esw10gPortConfigurationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.1 | Columngel2esw10gPortConfPort | not-accessible | current | port, range : 1 - port number. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.2 | Columngel2esw10gPortConfPortMedia | read-only | current | Show port media. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.3 | Columngel2esw10gPortConfLink | read-only | current | The current link state. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.4 | Columngel2esw10gPortConfCurrentSpeed | read-only | current | The current link speed of the port. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.5 | Columngel2esw10gPortConfSpeed | read-write | current | default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port d… |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.6 | Columngel2esw10gPortConfCurrentFlowControlRx | read-only | current | 0: disable 1: enable 2: not support. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.7 | Columngel2esw10gPortConfCurrentFlowControlTx | read-only | current | 0: disable 1: enable 2: not support. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.8 | Columngel2esw10gPortConfFlowControl | read-write | current | default: 0, 0: disable 1: enable 2: not support. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.9 | Columngel2esw10gPortConfMaxFrameSize | read-write | current | default: 9600 , range : 1518 - 9600 |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.10 | Columngel2esw10gPortConfExcessiveCollisionMode | read-write | current | default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: not support. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.11 | Columngel2esw10gPortConfPowerControl | read-write | current | default: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: not support. |
| 1.3.6.1.4.1.5205.2.51.2.1.1.1.12 | Columngel2esw10gPortConfDescription | read-write | current | Interface specific description. Up to 47 characters describing this interface. |
| 1.3.6.1.4.1.5205.2.51.2.1.2 | Tablegel2esw10gPortTrafficStatisticsTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1 | Rowgel2esw10gPortTrafficStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.1 | Columngel2esw10gPortTrafficStatisticsPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.2 | Columngel2esw10gPortTrafficStatisticsClear | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.3 | Columngel2esw10gPortTrafficRxPackets | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.4 | Columngel2esw10gPortTrafficRxOctets | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.5 | Columngel2esw10gPortTrafficRxUnicast | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.6 | Columngel2esw10gPortTrafficRxMulticast | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.7 | Columngel2esw10gPortTrafficRxBroadcast | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.8 | Columngel2esw10gPortTrafficRxPause | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.9 | Columngel2esw10gPortTrafficRx64Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.10 | Columngel2esw10gPortTrafficRx65to127Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.11 | Columngel2esw10gPortTrafficRx128to255Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.12 | Columngel2esw10gPortTrafficRx256to511Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.13 | Columngel2esw10gPortTrafficRx512to1023Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.14 | Columngel2esw10gPortTrafficRx1024to1526Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.15 | Columngel2esw10gPortTrafficRxExceecd1527Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.16 | Columngel2esw10gPortTrafficRxQ0 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.17 | Columngel2esw10gPortTrafficRxQ1 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.18 | Columngel2esw10gPortTrafficRxQ2 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.19 | Columngel2esw10gPortTrafficRxQ3 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.20 | Columngel2esw10gPortTrafficRxQ4 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.21 | Columngel2esw10gPortTrafficRxQ5 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.22 | Columngel2esw10gPortTrafficRxQ6 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.23 | Columngel2esw10gPortTrafficRxQ7 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.24 | Columngel2esw10gPortTrafficRxDrops | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.25 | Columngel2esw10gPortTrafficRxCRCorAlignment | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.26 | Columngel2esw10gPortTrafficRxUndersize | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.27 | Columngel2esw10gPortTrafficRxOversize | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.28 | Columngel2esw10gPortTrafficRxFragments | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.29 | Columngel2esw10gPortTrafficRxJabber | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.30 | Columngel2esw10gPortTrafficRxFiltered | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.31 | Columngel2esw10gPortTrafficTxPackets | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.32 | Columngel2esw10gPortTrafficTxOctets | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.33 | Columngel2esw10gPortTrafficTxUnicast | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.34 | Columngel2esw10gPortTrafficTxMulticast | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.35 | Columngel2esw10gPortTrafficTxBroadcast | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.36 | Columngel2esw10gPortTrafficTxPause | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.37 | Columngel2esw10gPortTrafficTx64Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.38 | Columngel2esw10gPortTrafficTx65to127Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.39 | Columngel2esw10gPortTrafficTx128to255Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.40 | Columngel2esw10gPortTrafficTx256to511Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.41 | Columngel2esw10gPortTrafficTx512to1023Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.42 | Columngel2esw10gPortTrafficTx1024to1526Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.43 | Columngel2esw10gPortTrafficTxExceecd1527Bytes | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.44 | Columngel2esw10gPortTrafficTxQ0 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.45 | Columngel2esw10gPortTrafficTxQ1 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.46 | Columngel2esw10gPortTrafficTxQ2 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.47 | Columngel2esw10gPortTrafficTxQ3 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.48 | Columngel2esw10gPortTrafficTxQ4 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.49 | Columngel2esw10gPortTrafficTxQ5 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.50 | Columngel2esw10gPortTrafficTxQ6 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.51 | Columngel2esw10gPortTrafficTxQ7 | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.52 | Columngel2esw10gPortTrafficTxDrops | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.2.1.53 | Columngel2esw10gPortTrafficTxLateOrExcColl | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3 | Nodegel2esw10gPortQoSStatistics | |||
| 1.3.6.1.4.1.5205.2.51.2.1.3.1 | Scalargel2esw10gPortQoSStatisticsClear | read-only | current | default: 0 0: none 1: clear |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2 | Tablegel2esw10gPortQoSStatisticsTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1 | Rowgel2esw10gPortQoSStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.1 | Columngel2esw10gPortQoSStatisticsPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.2 | Columngel2esw10gPortQoSQ0Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.3 | Columngel2esw10gPortQoSQ0Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.4 | Columngel2esw10gPortQoSQ1Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.5 | Columngel2esw10gPortQoSQ1Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.6 | Columngel2esw10gPortQoSQ2Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.7 | Columngel2esw10gPortQoSQ2Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.8 | Columngel2esw10gPortQoSQ3Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.9 | Columngel2esw10gPortQoSQ3Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.10 | Columngel2esw10gPortQoSQ4Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.11 | Columngel2esw10gPortQoSQ4Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.12 | Columngel2esw10gPortQoSQ5Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.13 | Columngel2esw10gPortQoSQ5Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.14 | Columngel2esw10gPortQoSQ6Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.15 | Columngel2esw10gPortQoSQ6Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.16 | Columngel2esw10gPortQoSQ7Rx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.3.2.1.17 | Columngel2esw10gPortQoSQ7Tx | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4 | Tablegel2esw10gSFPInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1 | Rowgel2esw10gSFPInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.1 | Columngel2esw10gSFPInfoIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.2 | Columngel2esw10gSFPInfoPort | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.3 | Columngel2esw10gSFPConnectorType | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.4 | Columngel2esw10gSFPFiberType | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.5 | Columngel2esw10gSFPTxCentralWavelength | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.6 | Columngel2esw10gSFPBaudRate | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.7 | Columngel2esw10gSFPVendorOUI | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.8 | Columngel2esw10gSFPVendorName | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.9 | Columngel2esw10gSFPVendorPN | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.10 | Columngel2esw10gSFPVendorRev | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.11 | Columngel2esw10gSFPVendorSN | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.12 | Columngel2esw10gSFPDateCode | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.13 | Columngel2esw10gSFPTemperature | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.14 | Columngel2esw10gSFPVcc | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.15 | Columngel2esw10gSFPMon1Bias | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.16 | Columngel2esw10gSFPMon2TxPWR | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.4.1.17 | Columngel2esw10gSFPMon3RxPWR | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.5 | Tablegel2esw10gPortEEETable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1 | Rowgel2esw10gPortEEEEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.1 | Columngel2esw10gPortEEEPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.2 | Columngel2esw10gPortEEEMode | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.3 | Columngel2esw10gPortEEEUrgentQueue1 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.4 | Columngel2esw10gPortEEEUrgentQueue2 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.5 | Columngel2esw10gPortEEEUrgentQueue3 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.6 | Columngel2esw10gPortEEEUrgentQueue4 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.7 | Columngel2esw10gPortEEEUrgentQueue5 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.8 | Columngel2esw10gPortEEEUrgentQueue6 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.9 | Columngel2esw10gPortEEEUrgentQueue7 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.1.5.1.10 | Columngel2esw10gPortEEEUrgentQueue8 | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.2.2 | Nodegel2esw10gVoiceVLAN | |||
| 1.3.6.1.4.1.5205.2.51.2.2.1 | Nodegel2esw10gVoiceVLANConf | |||
| 1.3.6.1.4.1.5205.2.51.2.2.1.1 | Scalargel2esw10gVoiceVLANMode | read-write | current | Voice VLAN mode operation. default: 0, 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.2.2.1.2 | Scalargel2esw10gVoiceVLANVLANId | read-write | current | Voice VLAN ID. default: 1000, range : 1-4094. |
| 1.3.6.1.4.1.5205.2.51.2.2.1.3 | Scalargel2esw10gVoiceVLANAgingTime | read-write | current | Voice VLAN secure learning aging time. default: 86400, range : 10 - 10000000. |
| 1.3.6.1.4.1.5205.2.51.2.2.1.4 | Scalargel2esw10gVoiceVLANTrafficClass | read-write | current | Voice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7. |
| 1.3.6.1.4.1.5205.2.51.2.2.1.5 | Tablegel2esw10gVoiceVLANPortTable | not-accessible | current | Show Voice Vlan configuration. |
| 1.3.6.1.4.1.5205.2.51.2.2.1.5.1 | Rowgel2esw10gVoiceVLANPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.2.1.5.1.1 | Columngel2esw10gVoiceVLANPort | not-accessible | current | port, range : 1 - port number. |
| 1.3.6.1.4.1.5205.2.51.2.2.1.5.1.2 | Columngel2esw10gVoiceVLANPortMode | read-write | current | Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to th… |
| 1.3.6.1.4.1.5205.2.51.2.2.1.5.1.3 | Columngel2esw10gVoiceVLANPortSecurity | read-write | current | Voice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all… |
| 1.3.6.1.4.1.5205.2.51.2.2.1.5.1.4 | Columngel2esw10gVoiceVLANPortDiscoveryProtocol | read-write | current | Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI an… |
| 1.3.6.1.4.1.5205.2.51.2.2.2 | Nodegel2esw10gVoiceVLANOUI | |||
| 1.3.6.1.4.1.5205.2.51.2.2.2.1 | Scalargel2esw10gVoiceVLANOUICreate | read-write | current | default: 0 0 : None (read only) 1 : Create an OUI entry |
| 1.3.6.1.4.1.5205.2.51.2.2.2.2 | Tablegel2esw10gVoiceVLANOUITable | not-accessible | current | Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process. |
| 1.3.6.1.4.1.5205.2.51.2.2.2.2.1 | Rowgel2esw10gVoiceVLANOUIEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.2.2.2.1.1 | Columngel2esw10gVoiceVLANOUIIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.2.2.2.1.2 | Columngel2esw10gVoiceVLANTelephonyOUI | read-write | current | OUI address, format : 0a 1b 2c |
| 1.3.6.1.4.1.5205.2.51.2.2.2.2.1.3 | Columngel2esw10gVoiceVLANDescription | read-write | current | Up to 32 characters describing OUI address. |
| 1.3.6.1.4.1.5205.2.51.2.2.2.2.1.4 | Columngel2esw10gVoiceVLANOUIRowStatus | read-write | current | 1: active 2: notInservice 4: destroy 5: undo |
| 1.3.6.1.4.1.5205.2.51.2.3 | Nodegel2esw10gGARP | |||
| 1.3.6.1.4.1.5205.2.51.2.3.1 | Tablegel2esw10gGARPConfTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1 | Rowgel2esw10gGARPConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.1 | Columngel2esw10gGARPConfPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.2 | Columngel2esw10gGARPJoinTimer | read-write | current | default: 200, range : 200 - 1000 |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.3 | Columngel2esw10gGARPLeaveTimer | read-write | current | default: 600 , range : 600 - 3000 |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.4 | Columngel2esw10gGARPLeaveAllTimer | read-write | current | default: 10000, range : 10000 - 50000 |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.5 | Columngel2esw10gGARPApplicantion | read-write | current | default: 1 1: GVRP |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.6 | Columngel2esw10gGARPAttributeType | read-write | current | default: 1 1: VLAN |
| 1.3.6.1.4.1.5205.2.51.2.3.1.1.7 | Columngel2esw10gGARPApplicant | read-write | current | default: 0 0: normal-participant 1: non-participant |
| 1.3.6.1.4.1.5205.2.51.2.3.2 | Tablegel2esw10gGARPStatisticsTable | not-accessible | current | Show the basic GARP port statistics. |
| 1.3.6.1.4.1.5205.2.51.2.3.2.1 | Rowgel2esw10gGARPStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.3.2.1.1 | Columngel2esw10gGARPStatisticsPort | not-accessible | current | port, range : 1 - port number. |
| 1.3.6.1.4.1.5205.2.51.2.3.2.1.2 | Columngel2esw10gGARPStatisticsPeerMAC | read-only | current | Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. |
| 1.3.6.1.4.1.5205.2.51.2.3.2.1.3 | Columngel2esw10gGARPStatisticsFailedCount | read-only | current | explain Failed count here. |
| 1.3.6.1.4.1.5205.2.51.2.4 | Nodegel2esw10gGVRP | |||
| 1.3.6.1.4.1.5205.2.51.2.4.1 | Nodegel2esw10gGVRPConf | |||
| 1.3.6.1.4.1.5205.2.51.2.4.1.1 | Scalargel2esw10gGVRPMode | read-write | current | default: 0, 0: disable, 1: enable. |
| 1.3.6.1.4.1.5205.2.51.2.4.1.2 | Tablegel2esw10gGVRPConfTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.1.2.1 | Rowgel2esw10gGVRPConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.1.2.1.1 | Columngel2esw10gGVRPConfPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.1.2.1.2 | Columngel2esw10gGVRPConfPortMode | read-write | current | default: 0 1: enable 0: disable |
| 1.3.6.1.4.1.5205.2.51.2.4.1.2.1.3 | Columngel2esw10gGVRPConfPortRRole | read-write | current | default: 0 1: enable 0: disable |
| 1.3.6.1.4.1.5205.2.51.2.4.2 | Tablegel2esw10gGVRPStatisticsTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.2.1 | Rowgel2esw10gGVRPStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.2.1.1 | Columngel2esw10gGVRPStatisticsPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.2.1.2 | Columngel2esw10gGVRPStatisticsJoinTxCnt | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.4.2.1.3 | Columngel2esw10gGVRPStatisticsLeaveTxCnt | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.5 | Nodegel2esw10gThermalProtection | |||
| 1.3.6.1.4.1.5205.2.51.2.5.1 | Scalargel2esw10gPriority0Temperature | read-write | current | default: 255, range : 0 - 255 |
| 1.3.6.1.4.1.5205.2.51.2.5.2 | Scalargel2esw10gPriority1Temperature | read-write | current | default: 255, range : 0 - 255 |
| 1.3.6.1.4.1.5205.2.51.2.5.3 | Scalargel2esw10gPriority2Temperature | read-write | current | default: 255, range : 0 - 255 |
| 1.3.6.1.4.1.5205.2.51.2.5.4 | Scalargel2esw10gPriority3Temperature | read-write | current | default: 255, range : 0 - 255 |
| 1.3.6.1.4.1.5205.2.51.2.5.5 | Tablegel2esw10gThermalProtectionTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.5.5.1 | Rowgel2esw10gThermalProtectionEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.5.5.1.1 | Columngel2esw10gThermalProtectionPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.5.5.1.2 | Columngel2esw10gThermalProtectionPortTemperature | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.5.5.1.3 | Columngel2esw10gThermalProtectionPortPriority | read-write | current | default: 0, range : 0 - 3 |
| 1.3.6.1.4.1.5205.2.51.2.5.5.1.4 | Columngel2esw10gThermalProtectionPortStatus | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.2.6 | Nodegel2esw10gMirroring | |||
| 1.3.6.1.4.1.5205.2.51.2.6.1 | Scalargel2esw10gPortToMirrorOn | read-write | current | default: 0 0: disable, range : 1 - port number. |
| 1.3.6.1.4.1.5205.2.51.2.6.2 | Tablegel2esw10gMirrorTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.6.2.1 | Rowgel2esw10gMirrorEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.6.2.1.1 | Columngel2esw10gMirrorPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.6.2.1.2 | Columngel2esw10gMirrorMode | read-write | current | default: 0 0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored |
| 1.3.6.1.4.1.5205.2.51.2.7 | Nodegel2esw10gTrapEventSeverity | |||
| 1.3.6.1.4.1.5205.2.51.2.7.1 | Scalargel2esw10gTrapEventSeverityACL | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.2 | Scalargel2esw10gTrapEventSeverityACLLog | read-write | current | default: 7(Debug) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.3 | Scalargel2esw10gTrapEventSeverityAccessMgmt | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.4 | Scalargel2esw10gTrapEventSeverityAuthFailed | read-write | current | default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.5 | Scalargel2esw10gTrapEventSeverityColdStart | read-write | current | default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.6 | Scalargel2esw10gTrapEventSeverityConfigInfo | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.7 | Scalargel2esw10gTrapEventSeverityFirmwareUpgrade | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.8 | Scalargel2esw10gTrapEventSeverityImportExport | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.9 | Scalargel2esw10gTrapEventSeverityLACP | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.10 | Scalargel2esw10gTrapEventSeverityLinkStatus | read-write | current | default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.11 | Scalargel2esw10gTrapEventSeverityLogin | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.12 | Scalargel2esw10gTrapEventSeverityLogout | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.13 | Scalargel2esw10gTrapEventSeverityLoopProtect | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.14 | Scalargel2esw10gTrapEventSeverityMgmtIPChange | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.15 | Scalargel2esw10gTrapEventSeverityModuleChange | read-write | current | default: 5(Notice) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.16 | Scalargel2esw10gTrapEventSeverityNAS | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.17 | Scalargel2esw10gTrapEventSeverityPasswdChange | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.18 | Scalargel2esw10gTrapEventSeverityPortSecurity | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.19 | Scalargel2esw10gTrapEventSeverityThermalProtect | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.20 | Scalargel2esw10gTrapEventSeverityVLAN | read-write | current | default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.7.21 | Scalargel2esw10gTrapEventSeverityWarmStart | read-write | current | default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.8 | Nodegel2esw10gSMTP | |||
| 1.3.6.1.4.1.5205.2.51.2.8.1 | Scalargel2esw10gSMTPMailServer | read-write | current | Up to 47 characters describing email server. |
| 1.3.6.1.4.1.5205.2.51.2.8.2 | Scalargel2esw10gSMTPUserName | read-write | current | Up to 47 characters describing user name. |
| 1.3.6.1.4.1.5205.2.51.2.8.3 | Scalargel2esw10gSMTPPassword | read-write | current | Up to 47 characters describing password. |
| 1.3.6.1.4.1.5205.2.51.2.8.4 | Scalargel2esw10gSMTPServeriryLevel | read-write | current | default: 6 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug |
| 1.3.6.1.4.1.5205.2.51.2.8.5 | Scalargel2esw10gSMTPSender | read-write | current | Up to 47 characters describing sender. |
| 1.3.6.1.4.1.5205.2.51.2.8.6 | Scalargel2esw10gSMTPReturnPath | read-write | current | Up to 47 characters describing return path. |
| 1.3.6.1.4.1.5205.2.51.2.8.7 | Scalargel2esw10gSMTPEmailAddress1 | read-write | current | Up to 47 characters describing mail address. |
| 1.3.6.1.4.1.5205.2.51.2.8.8 | Scalargel2esw10gSMTPEmailAddress2 | read-write | current | Up to 47 characters describing mail address. |
| 1.3.6.1.4.1.5205.2.51.2.8.9 | Scalargel2esw10gSMTPEmailAddress3 | read-write | current | Up to 47 characters describing mail address. |
| 1.3.6.1.4.1.5205.2.51.2.8.10 | Scalargel2esw10gSMTPEmailAddress4 | read-write | current | Up to 47 characters describing mail address. |
| 1.3.6.1.4.1.5205.2.51.2.8.11 | Scalargel2esw10gSMTPEmailAddress5 | read-write | current | Up to 47 characters describing mail address. |
| 1.3.6.1.4.1.5205.2.51.2.8.12 | Scalargel2esw10gSMTPEmailAddress6 | read-write | current | Up to 47 characters describing mail address. |
| 1.3.6.1.4.1.5205.2.51.2.9 | Nodegel2esw10gACL | |||
| 1.3.6.1.4.1.5205.2.51.2.9.1 | Tablegel2esw10gACLPortsConfTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1 | Rowgel2esw10gACLPortsConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.1 | Columngel2esw10gACLPortsConfPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.2 | Columngel2esw10gACLPortsConfPolicyID | read-write | current | default: 0, range : 0 - 255 |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.3 | Columngel2esw10gACLPortsConfAction | read-write | current | default: 1, 0: Deny 1: Permit |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.4 | Columngel2esw10gACLPortsConfRateLimiterID | read-write | current | default: 0, 0: Disable range : 0 - 16 |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.5 | Columngel2esw10gACLPortsConfPortRedirect | read-write | current | default: 0 0: Disable range : 0 - end port number |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.6 | Columngel2esw10gACLPortsConfMirror | read-write | current | default: 0 0: Disable 1: Enable |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.7 | Columngel2esw10gACLPortsConfLogging | read-write | current | default: 0 0: Disable 1: Enable |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.8 | Columngel2esw10gACLPortsConfShutdown | read-write | current | default: 0 0: Disable 1: Enable |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.9 | Columngel2esw10gACLPortsConfState | read-write | current | default: 1 0: Disable 1: Enable |
| 1.3.6.1.4.1.5205.2.51.2.9.1.1.10 | Columngel2esw10gACLPortsConfCounter | read-only | current | Counts the number of frames that match this ACE. |
| 1.3.6.1.4.1.5205.2.51.2.9.2 | Tablegel2esw10gACLRateLimiterTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.2.1 | Rowgel2esw10gACLRateLimiterEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.2.1.1 | Columngel2esw10gACLRateLimiterID | not-accessible | current | Rate Limiter ID. range : 1-16 |
| 1.3.6.1.4.1.5205.2.51.2.9.2.1.2 | Columngel2esw10gACLRateLimiterUnit | read-write | current | default: 0, 0: pps 1: kbps |
| 1.3.6.1.4.1.5205.2.51.2.9.2.1.3 | Columngel2esw10gACLRateLimiterRate | read-write | current | default: 1, range : <0-3276700> pps <0-10000> kbps |
| 1.3.6.1.4.1.5205.2.51.2.9.3 | Nodegel2esw10gACLACE | |||
| 1.3.6.1.4.1.5205.2.51.2.9.3.1 | Scalargel2esw10gACLACECreate | read-write | current | default: 0 0 : None (read only) 1 : Create an ACE entry |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2 | Tablegel2esw10gACLACETable | not-accessible | current | Create ACL ACE entry. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1 | Rowgel2esw10gACLACEEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.1 | Columngel2esw10gACLACEIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.2 | Columngel2esw10gACLACEID | read-write | current | If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.3 | Columngel2esw10gACLACENextID | read-write | current | If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.4 | Columngel2esw10gACLACEIngressPort | read-write | current | Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.5 | Columngel2esw10gACLACEPortPolicyNumber | read-write | current | policy value. range : 0 - 255. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.6 | Columngel2esw10gACLACEPortPolicyBitmask | read-write | current | policy bitmask. range : 0 - 255(0xff). |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.7 | Columngel2esw10gACLACEFrameType | read-write | current | 0: any, 1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.8 | Columngel2esw10gACLACEAction | read-write | current | default: 1, 0: Deny 1: Permit |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.9 | Columngel2esw10gACLACEDenyPortRedirect | read-write | current | Frames that hit the ACE are redirected to the port number specified here. Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.10 | Columngel2esw10gACLACELogging | read-write | current | default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.11 | Columngel2esw10gACLACEMirror | read-write | current | default: 0, 0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.12 | Columngel2esw10gACLACERateLimiter | read-write | current | default: 0, 0: Disable range : 0 - 16 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.13 | Columngel2esw10gACLACEShutdown | read-write | current | default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.14 | Columngel2esw10gACLACEVLAN8021QTagged | read-write | current | Specify whether frames can hit the action according to the 802.1Q tagged. default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any -… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.15 | Columngel2esw10gACLACEVLANTagPriority | read-write | current | Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.16 | Columngel2esw10gACLACEVLANVID | read-write | current | Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.17 | Columngel2esw10gACLACEEtherType | read-write | current | 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff). |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.18 | Columngel2esw10gACLACESMAC | read-write | current | Configure source MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this source MAC address value. Any: Don't care. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.19 | Columngel2esw10gACLACEDMACType | read-write | current | DMAC Type. default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unitcast. 3: Multicast - Frame must be multicast… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.20 | Columngel2esw10gACLACEDMAC | read-write | current | Configure destination MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcas… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.21 | Columngel2esw10gACLACEArpOpcode | read-write | current | Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 3 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.22 | Columngel2esw10gACLACEArpFlagsRequestReply | read-write | current | Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.23 | Columngel2esw10gACLACEArpFlagsArpSmac | read-write | current | Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.24 | Columngel2esw10gACLACEArpFlagsRarpDmac | read-write | current | Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.25 | Columngel2esw10gACLACEArpFlagsLength | read-write | current | Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.26 | Columngel2esw10gACLACEArpFlagsIp | read-write | current | Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is no… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.27 | Columngel2esw10gACLACEArpFlagsEthernet | read-write | current | Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is no… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.28 | Columngel2esw10gACLACESIPType | read-write | current | Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.29 | Columngel2esw10gACLACESIPIPAddress | read-write | current | A frame that hits this ACE matches this source IP address value. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.30 | Columngel2esw10gACLACESIPNetworkPrefix | read-write | current | Network prefix. default: 32, 0: No data. range : 1 - 32 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.32 | Columngel2esw10gACLACEDIPType | read-write | current | Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.33 | Columngel2esw10gACLACEDIPIPAddress | read-write | current | A frame that hits this ACE matches this destination IP address value. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.34 | Columngel2esw10gACLACEDIPNetworkPrefix | read-write | current | Network prefix. default: 32, 0: No data. range : 1 - 32 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.36 | Columngel2esw10gACLACEIPProtocol | read-write | current | Configure IP protocol for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.37 | Columngel2esw10gACLACEIPFlagsTTL | read-write | current | Configure IP Time-to-Live flags for this ACE. default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field g… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.38 | Columngel2esw10gACLACEIPFlagsOptions | read-write | current | Configure IP options flag for this ACE. default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don'… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.39 | Columngel2esw10gACLACEIPFlagsFragment | read-write | current | Configure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames w… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.40 | Columngel2esw10gACLACEICMPType | read-write | current | Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.41 | Columngel2esw10gACLACEICMPCode | read-write | current | Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.42 | Columngel2esw10gACLACESourcePortMin | read-write | current | Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.43 | Columngel2esw10gACLACESourcePortMax | read-write | current | Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.44 | Columngel2esw10gACLACEDestPortMin | read-write | current | Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.45 | Columngel2esw10gACLACEDestPortMax | read-write | current | Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535 |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.46 | Columngel2esw10gACLACETCPFlagsFin | read-write | current | Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.47 | Columngel2esw10gACLACETCPFlagsSyn | read-write | current | Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.48 | Columngel2esw10gACLACETCPFlagsRst | read-write | current | Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.49 | Columngel2esw10gACLACETCPFlagsPsh | read-write | current | Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.50 | Columngel2esw10gACLACETCPFlagsAck | read-write | current | Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.51 | Columngel2esw10gACLACETCPFlagsUrg | read-write | current | Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. … |
| 1.3.6.1.4.1.5205.2.51.2.9.3.2.1.66 | Columngel2esw10gACLACERowStatus | read-write | current | 1: active 2: notInservice 4: destroy 5: undo |
| 1.3.6.1.4.1.5205.2.51.2.9.3.3 | Scalargel2esw10gACLACEClear | read-write | current | default: 0 0 : No action 1 : Clear all ACL counters. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.4 | Scalargel2esw10gACLACEMoveACEID | read-write | current | Move ACE, default: 0 ACE ID must be exist. range : 1 - 256. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.5 | Scalargel2esw10gACLACEMoveNextACEID | read-write | current | Move ACE, default: 0 If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed las… |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6 | Tablegel2esw10gACLACEStatusTable | not-accessible | current | ACL ACE Status entry. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1 | Rowgel2esw10gACLACEStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.1 | Columngel2esw10gACLACEStatusIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.2 | Columngel2esw10gACLACEStatusUser | read-only | current | Indicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.3 | Columngel2esw10gACLACEStatusID | read-only | current | ACE ID. range : 1 - 256. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.4 | Columngel2esw10gACLACEStatusIngressPort | read-only | current | Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.5 | Columngel2esw10gACLACEStatusFrameType | read-only | current | Indicates the frame type of the ACE. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.6 | Columngel2esw10gACLACEStatusAction | read-only | current | Indicates the forwarding action of the ACE. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.7 | Columngel2esw10gACLACEStatusRateLimiter | read-only | current | Indicates the rate limiter number of the ACE. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.8 | Columngel2esw10gACLACEStatusPortCopy | read-only | current | Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.9 | Columngel2esw10gACLACEStatusMirror | read-only | current | Specify the mirror operation of this port. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.10 | Columngel2esw10gACLACEStatusCPU | read-only | current | Forward packet that matched the specific ACE to CPU. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.11 | Columngel2esw10gACLACEStatusCounter | read-only | current | The counter indicates the number of times the ACE was hit by a frame. |
| 1.3.6.1.4.1.5205.2.51.2.9.3.6.1.12 | Columngel2esw10gACLACEStatusConflict | read-only | current | Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. |
| 1.3.6.1.4.1.5205.2.51.3 | Nodegel2esw10gSecurity | |||
| 1.3.6.1.4.1.5205.2.51.3.1 | Nodegel2esw10gIPSourceGuard | |||
| 1.3.6.1.4.1.5205.2.51.3.1.1 | Nodegel2esw10gIPSourceGuardConf | |||
| 1.3.6.1.4.1.5205.2.51.3.1.1.1 | Scalargel2esw10gIPSourceGuardMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.1.1.2 | Tablegel2esw10gIPSourceGuardPortConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.1.2.1 | Rowgel2esw10gIPSourceGuardPortConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.1.2.1.1 | Columngel2esw10gIPSourceGuardPortConfigPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.1.2.1.2 | Columngel2esw10gIPSourceGuardPortConfigMode | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.3.1.1.2.1.3 | Columngel2esw10gIPSourceGuardPortMaxDynamicClients | read-write | current | default: 99 0~2: Max Dynamic clients 99:Unlimited |
| 1.3.6.1.4.1.5205.2.51.3.1.2 | Nodegel2esw10gIPSourceGuardStatic | |||
| 1.3.6.1.4.1.5205.2.51.3.1.2.1 | Scalargel2esw10gIPSourceGuardStaticCreate | read-write | current | default: 0 0 : None (read only) 1 : Create a IP Source Guard |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2 | Tablegel2esw10gIPSourceGuardStaticTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1 | Rowgel2esw10gIPSourceGuardStaticEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1.1 | Columngel2esw10gIPSourceGuardStaticIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1.2 | Columngel2esw10gIPSourceGuardStaticPort | read-write | current | Port, range: 1 - port number. |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1.3 | Columngel2esw10gIPSourceGuardStaticVLANId | read-write | current | VLAN ID, range: 1 - 4094. |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1.4 | Columngel2esw10gIPSourceGuardStaticIPAddress | read-write | current | IP address allowed for doing IP source guard. |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1.5 | Columngel2esw10gIPSourceGuardStaticMACAddress | read-write | current | Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f |
| 1.3.6.1.4.1.5205.2.51.3.1.2.2.1.6 | Columngel2esw10gIPSourceGuardStaticRowStatus | read-write | current | 1: active 2: notInservice 3: edit 4: destroy 5: undo |
| 1.3.6.1.4.1.5205.2.51.3.1.3 | Tablegel2esw10gIPSourceGuardDynamicTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.3.1 | Rowgel2esw10gIPSourceGuardDynamicEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.3.1.1 | Columngel2esw10gIPSourceGuardDynamicIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.3.1.2 | Columngel2esw10gIPSourceGuardDynamicPort | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.3.1.3 | Columngel2esw10gIPSourceGuardDynamicVLANId | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.3.1.4 | Columngel2esw10gIPSourceGuardDynamicIPAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.1.3.1.5 | Columngel2esw10gIPSourceGuardDynamicMACAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.2 | Nodegel2esw10gARPInspection | |||
| 1.3.6.1.4.1.5205.2.51.3.2.1 | Nodegel2esw10gARPInspectionConf | |||
| 1.3.6.1.4.1.5205.2.51.3.2.1.1 | Scalargel2esw10gARPInspectionConfMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.2.1.2 | Tablegel2esw10gARPInspectionConfTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.1.2.1 | Rowgel2esw10gARPInspectionConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.1.2.1.1 | Columngel2esw10gARPInspectionConfPortIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.1.2.1.2 | Columngel2esw10gARPInspectionConfPortMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.2.2 | Nodegel2esw10gARPInspectionStatic | |||
| 1.3.6.1.4.1.5205.2.51.3.2.2.1 | Scalargel2esw10gARPInspectionStaticCreate | read-write | current | default: 0 0: none 1: create |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2 | Tablegel2esw10gARPInspectionStaticTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1 | Rowgel2esw10gARPInspectionStaticEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1.1 | Columngel2esw10gARPInspectionStaticIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1.2 | Columngel2esw10gARPInspectionStaticPort | read-write | current | Port, range: 1 - port number. |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1.3 | Columngel2esw10gARPInspectionStaticVLANId | read-write | current | VLAN ID, range: 1 - 4094. |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1.4 | Columngel2esw10gARPInspectionStaticIPAddress | read-write | current | IP address allowed for doing ARP request. |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1.5 | Columngel2esw10gARPInspectionStaticMACAddress | read-write | current | Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f |
| 1.3.6.1.4.1.5205.2.51.3.2.2.2.1.6 | Columngel2esw10gARPInspectionStaticRowStatus | read-write | current | 1: active 2: notInservice 3: edit 4: destroy 5: undo |
| 1.3.6.1.4.1.5205.2.51.3.2.3 | Tablegel2esw10gARPInspectionDynamicTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.3.1 | Rowgel2esw10gARPInspectionDynamicEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.3.1.1 | Columngel2esw10gARPInspectionDynamicIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.3.1.2 | Columngel2esw10gARPInspectionDynamicPort | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.3.1.3 | Columngel2esw10gARPInspectionDynamicVLANId | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.3.1.4 | Columngel2esw10gARPInspectionDynamicIPAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.2.3.1.5 | Columngel2esw10gARPInspectionDynamicMACAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3 | Nodegel2esw10gDHCPSnooping | |||
| 1.3.6.1.4.1.5205.2.51.3.3.1 | Nodegel2esw10gDHCPSnoopingConf | |||
| 1.3.6.1.4.1.5205.2.51.3.3.1.1 | Scalargel2esw10gDHCPSnoopingMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.3.1.2 | Tablegel2esw10gDHCPSnoopingPortModeConfigurationTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.1.2.1 | Rowgel2esw10gDHCPSnoopingPortModeConfigurationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.1.2.1.1 | Columngel2esw10gDHCPSnoopingPortModeConfigurationPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.1.2.1.2 | Columngel2esw10gDHCPSnoopingPortModeConfigurationMode | read-write | current | default: 1 0: trust port mode 1: untrust port mode |
| 1.3.6.1.4.1.5205.2.51.3.3.2 | Tablegel2esw10gDHCPSnoopingStatisticsTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1 | Rowgel2esw10gDHCPSnoopingStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.1 | Columngel2esw10gDHCPSnoopingStatisticsPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.2 | Columngel2esw10gDHCPSnoopingStatisticsClear | read-write | current | default: 0 0: none 1: clear |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.3 | Columngel2esw10gDHCPSnoopingRxDiscover | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.4 | Columngel2esw10gDHCPSnoopingRxOffer | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.5 | Columngel2esw10gDHCPSnoopingRxRequest | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.6 | Columngel2esw10gDHCPSnoopingRxDecline | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.7 | Columngel2esw10gDHCPSnoopingRxACK | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.8 | Columngel2esw10gDHCPSnoopingRxNAK | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.9 | Columngel2esw10gDHCPSnoopingRxRelease | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.10 | Columngel2esw10gDHCPSnoopingRxInform | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.11 | Columngel2esw10gDHCPSnoopingRxLeaseQuery | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.12 | Columngel2esw10gDHCPSnoopingRxLeaseUnassigned | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.13 | Columngel2esw10gDHCPSnoopingRxLeaseUnknown | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.14 | Columngel2esw10gDHCPSnoopingRxLeaseActive | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.15 | Columngel2esw10gDHCPSnoopingTxDiscover | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.16 | Columngel2esw10gDHCPSnoopingTxOffer | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.17 | Columngel2esw10gDHCPSnoopingTxRequest | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.18 | Columngel2esw10gDHCPSnoopingTxDecline | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.19 | Columngel2esw10gDHCPSnoopingTxACK | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.20 | Columngel2esw10gDHCPSnoopingTxNAK | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.21 | Columngel2esw10gDHCPSnoopingTxRelease | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.22 | Columngel2esw10gDHCPSnoopingTxInform | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.23 | Columngel2esw10gDHCPSnoopingTxLeaseQuery | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.24 | Columngel2esw10gDHCPSnoopingTxLeaseUnassigned | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.25 | Columngel2esw10gDHCPSnoopingTxLeaseUnknown | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.3.2.1.26 | Columngel2esw10gDHCPSnoopingTxLeaseActive | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4 | Nodegel2esw10gDHCPRelay | |||
| 1.3.6.1.4.1.5205.2.51.3.4.1 | Nodegel2esw10gDHCPRelayConfiguration | |||
| 1.3.6.1.4.1.5205.2.51.3.4.1.1 | Scalargel2esw10gDHCPRelayMode | read-write | current | default: 0 0: disable 1: enable We need at least one server |
| 1.3.6.1.4.1.5205.2.51.3.4.1.2 | Scalargel2esw10gDHCPRelayServer | read-write | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.1.3 | Scalargel2esw10gDHCPRelayInformationMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.4.1.4 | Scalargel2esw10gDHCPRelayInformationPolicy | read-write | current | default: 0 0: replace 1: keep 2: drop |
| 1.3.6.1.4.1.5205.2.51.3.4.2 | Nodegel2esw10gDHCPRelayStatistics | |||
| 1.3.6.1.4.1.5205.2.51.3.4.2.1 | Nodegel2esw10gDHCPRelayServerStatistics | |||
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.1 | Scalargel2esw10gServerStatTransmitToServer | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.2 | Scalargel2esw10gServerStatTransmitError | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.3 | Scalargel2esw10gServerStatReceiveFromServer | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.4 | Scalargel2esw10gServerStatReceiveMissingAgentOption | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.5 | Scalargel2esw10gServerStatReceiveMissingCircuitID | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.6 | Scalargel2esw10gServerStatReceiveMissingRemoteID | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.7 | Scalargel2esw10gServerStatReceiveBadCircuitID | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.1.8 | Scalargel2esw10gServerStatReceiveBadRemoteID | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2 | Nodegel2esw10gDHCPRelayClientStatistics | |||
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.1 | Scalargel2esw10gClientStatTransmitToClient | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.2 | Scalargel2esw10gClientStatTransmitError | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.3 | Scalargel2esw10gClientStatReceivefromClient | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.4 | Scalargel2esw10gClientStatReceiveAgentOption | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.5 | Scalargel2esw10gClientStatReplaceAgentOption | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.6 | Scalargel2esw10gClientStatKeepAgentOption | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.4.2.2.7 | Scalargel2esw10gClientStatDropAgentOption | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5 | Nodegel2esw10gPortSecurity | |||
| 1.3.6.1.4.1.5205.2.51.3.5.1 | Nodegel2esw10gPortSecLimitCtrl | |||
| 1.3.6.1.4.1.5205.2.51.3.5.1.1 | Nodegel2esw10gPortSecLimitCtrlSystemConf | |||
| 1.3.6.1.4.1.5205.2.51.3.5.1.1.1 | Scalargel2esw10gPortSecurityMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.5.1.1.2 | Scalargel2esw10gPortSecurityAging | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.5.1.1.3 | Scalargel2esw10gPortSecurityAgingPeriod | read-write | current | default: 3600, range: 10-10000000 |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2 | Tablegel2esw10gPortSecLimitCtrlTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1 | Rowgel2esw10gPortSecLimitCtrlEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1.1 | Columngel2esw10gPortSecLimitCtrlPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1.2 | Columngel2esw10gPortSecLimitCtrlPortMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1.3 | Columngel2esw10gPortSecLimitCtrlPortLimit | read-write | current | default: 4, range: 1-1024 |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1.4 | Columngel2esw10gPortSecLimitCtrlPortAction | read-write | current | default: 0 0: none 1: trap 2: shutdown 3: trap&shutdown |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1.5 | Columngel2esw10gPortSecLimitCtrlPortState | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.1.2.1.6 | Columngel2esw10gPortSecLimitCtrlPortReOpen | read-write | current | default: 0 0: none 1: reopen |
| 1.3.6.1.4.1.5205.2.51.3.5.2 | Tablegel2esw10gPortSecSwitchStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.2.1 | Rowgel2esw10gPortSecSwitchStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.2.1.1 | Columngel2esw10gPortSecSwitchStatusPort | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.2.1.2 | Columngel2esw10gPortSecSwitchStatusUsers | read-only | current | Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN, '-' means that the corresponding user module is not enabled. |
| 1.3.6.1.4.1.5205.2.51.3.5.2.1.3 | Columngel2esw10gPortSecSwitchStatusState | read-only | current | Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. |
| 1.3.6.1.4.1.5205.2.51.3.5.2.1.4 | Columngel2esw10gPortSecSwitchStatusMACCountCurrent | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.2.1.5 | Columngel2esw10gPortSecSwitchStatusMACCountLimit | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3 | Nodegel2esw10gPortSecPortStatus | |||
| 1.3.6.1.4.1.5205.2.51.3.5.3.1 | Scalargel2esw10gPortSecPortStatusPort | read-write | current | default: 0 0 : None |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2 | Tablegel2esw10gPortSecPortStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1 | Rowgel2esw10gPortSecPortStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1.1 | Columngel2esw10gPortSecPortStatusIndex | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1.2 | Columngel2esw10gPortSecPortStatusMACAddress | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1.3 | Columngel2esw10gPortSecPortStatusVLANId | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1.4 | Columngel2esw10gPortSecPortStatusState | read-only | current | Blocked / Forwarding |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1.5 | Columngel2esw10gPortSecPortStatusTimeOfAddition | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.5.3.2.1.6 | Columngel2esw10gPortSecPortStatusAgeAndHold | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6 | Nodegel2esw10gAccessManagement | |||
| 1.3.6.1.4.1.5205.2.51.3.6.1 | Nodegel2esw10gAccessMgtConf | |||
| 1.3.6.1.4.1.5205.2.51.3.6.1.1 | Scalargel2esw10gAccessMgtConfMode | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.6.1.2 | Scalargel2esw10gAccessMgtConfCreate | read-write | current | default: 0 0: none 1: create |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3 | Tablegel2esw10gAccessMgtConfTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1 | Rowgel2esw10gAccessMgtConfEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.1 | Columngel2esw10gAccessMgtIndex | read-write | current | Set Access Management config index range : 1-16. |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.2 | Columngel2esw10gAccessMgtAddresstype | read-write | current | 0: ipv4 1: ipv6 |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.3 | Columngel2esw10gAccessMgtStartIpAddress | read-write | current | Start IP address. IP address doesn't allowed all zero or all 'ff'H. |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.4 | Columngel2esw10gAccessMgtEndIpAddress | read-write | current | End IP address. IP address doesn't allowed all zero or all 'ff'H. End ip address is not less than start ip address. |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.5 | Columngel2esw10gAccessMgtHttpHttps | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.6 | Columngel2esw10gAccessMgtSNMP | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.7 | Columngel2esw10gAccessMgtTelnetSSH | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.6.1.3.1.8 | Columngel2esw10gAccessMgtRowStatus | read-write | current | 1: active 2: notInservice 3: edit 4: destroy 5: undo |
| 1.3.6.1.4.1.5205.2.51.3.6.2 | Nodegel2esw10gAccessMgtStatistics | |||
| 1.3.6.1.4.1.5205.2.51.3.6.2.1 | Scalargel2esw10gHttpReceivedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.2 | Scalargel2esw10gHttpAllowedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.3 | Scalargel2esw10gHttpDiscardedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.4 | Scalargel2esw10gHttpsReceivedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.5 | Scalargel2esw10gHttpsAllowedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.6 | Scalargel2esw10gHttpsDiscardedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.7 | Scalargel2esw10gSnmpReceivedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.8 | Scalargel2esw10gSnmpAllowedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.9 | Scalargel2esw10gSnmpDiscardedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.10 | Scalargel2esw10gTelnetReceivedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.11 | Scalargel2esw10gTelnetAllowedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.12 | Scalargel2esw10gTelnetDiscardedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.13 | Scalargel2esw10gSSHReceivedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.14 | Scalargel2esw10gSSHAllowedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.15 | Scalargel2esw10gSSHDiscardedPkts | read-only | current | |
| 1.3.6.1.4.1.5205.2.51.3.6.2.16 | Scalargel2esw10gAccessMgtStatisticsClearAll | read-write | current | 0: none 1: clear |
| 1.3.6.1.4.1.5205.2.51.3.7 | Nodegel2esw10gSSH | |||
| 1.3.6.1.4.1.5205.2.51.3.7.1 | Scalargel2esw10gSSHMode | read-write | current | default: 1 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.8 | Nodegel2esw10gHTTPS | |||
| 1.3.6.1.4.1.5205.2.51.3.8.1 | Scalargel2esw10gHTTPSMode | read-write | current | default: 1 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.8.2 | Scalargel2esw10gHTTPSAutoRedirect | read-write | current | default: 0 0: disable 1: enable |
| 1.3.6.1.4.1.5205.2.51.3.9 | Nodegel2esw10gAuthMethod | |||
| 1.3.6.1.4.1.5205.2.51.3.9.1 | Scalargel2esw10gConsoleAuthMethod | read-write | current | default: 1 0: none 1: local 2: RADIUS 3: TACACS+ |
| 1.3.6.1.4.1.5205.2.51.3.9.2 | Scalargel2esw10gConsoleFallback | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.3.9.3 | Scalargel2esw10gTelnetAuthMethod | read-write | current | default: 1 0: none 1: local 2: RADIUS 3: TACACS+ |
| 1.3.6.1.4.1.5205.2.51.3.9.4 | Scalargel2esw10gTelnetFallback | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.3.9.5 | Scalargel2esw10gSshAuthMethod | read-write | current | default: 1 0: none 1: local 2: RADIUS 3: TACACS+ |
| 1.3.6.1.4.1.5205.2.51.3.9.6 | Scalargel2esw10gSshFallback | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.3.9.7 | Scalargel2esw10gWebAuthMethod | read-write | current | default: 1 0: none 1: local 2: RADIUS 3: TACACS+ |
| 1.3.6.1.4.1.5205.2.51.3.9.8 | Scalargel2esw10gWebFallback | read-write | current | default: 0 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.51.4 | Nodegel2esw10gMaintenance | |||
| 1.3.6.1.4.1.5205.2.51.4.1 | Scalargel2esw10gRestartDevice | read-write | current | default: 0 0:none 1:yes |
| 1.3.6.1.4.1.5205.2.51.4.2 | Nodegel2esw10gFirmware | |||
| 1.3.6.1.4.1.5205.2.51.4.2.1 | Scalargel2esw10gFirmwareIpAddress | read-write | current | Get/Set the firmware tftp server. |
| 1.3.6.1.4.1.5205.2.51.4.2.2 | Scalargel2esw10gFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.51.4.2.3 | Scalargel2esw10gDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.51.4.3 | Nodegel2esw10gSaveOrRestore | |||
| 1.3.6.1.4.1.5205.2.51.4.3.1 | Scalargel2esw10gFactoryDefaults | read-write | current | default: 0 0:none 1:yes |
| 1.3.6.1.4.1.5205.2.51.4.3.2 | Scalargel2esw10gSaveStart | read-write | current | default: 0 0:none 1:yes |
| 1.3.6.1.4.1.5205.2.51.4.3.3 | Scalargel2esw10gSaveUser | read-write | current | default: 0 0:none 1:yes |
| 1.3.6.1.4.1.5205.2.51.4.3.4 | Scalargel2esw10gRestoreUser | read-write | current | default: 0 0:none 1:yes |
| 1.3.6.1.4.1.5205.2.51.4.4 | Nodegel2esw10gExportOrImport | |||
| 1.3.6.1.4.1.5205.2.51.4.4.1 | Scalargel2esw10gExportIpAddress | read-write | current | Get/Set the export tftp server. |
| 1.3.6.1.4.1.5205.2.51.4.4.2 | Scalargel2esw10gExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.5205.2.51.4.4.3 | Scalargel2esw10gDoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - export. |
| 1.3.6.1.4.1.5205.2.51.4.4.4 | Scalargel2esw10gImportIpAddress | read-write | current | Get/Set the import tftp server. |
| 1.3.6.1.4.1.5205.2.51.4.4.5 | Scalargel2esw10gImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.51.4.4.6 | Scalargel2esw10gDoImportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - import. |
| 1.3.6.1.4.1.5205.2.51.4.5 | Nodegel2esw10gDiagnostics | |||
| 1.3.6.1.4.1.5205.2.51.4.5.1 | Scalargel2esw10gPingIpAddress | read-write | current | The destination IP Address. |
| 1.3.6.1.4.1.5205.2.51.4.5.2 | Scalargel2esw10gPingSize | read-write | current | Size of ICMP echo packet. range : 60-1400, default : 64. |
| 1.3.6.1.4.1.5205.2.51.4.5.3 | Scalargel2esw10gDoPingConfig | read-write | current | Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host… |
| 1.3.6.1.4.1.5205.2.51.4.5.4 | Scalargel2esw10gPingResult | read-only | current | Show ping result. |
| 1.3.6.1.4.1.5205.2.51.4.5.5 | Scalargel2esw10gPing6IpAddress | read-write | current | The destination IPv6 Address. |
| 1.3.6.1.4.1.5205.2.51.4.5.6 | Scalargel2esw10gPing6Size | read-write | current | Size of ICMP echo packet. range : 60-1400. |
| 1.3.6.1.4.1.5205.2.51.4.5.7 | Scalargel2esw10gDoPing6Config | read-write | current | Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host… |
| 1.3.6.1.4.1.5205.2.51.4.5.8 | Scalargel2esw10gPing6Result | read-only | current | Show ping result. |
| 1.3.6.1.4.1.5205.2.51.4.5.9 | Nodegel2esw10gVeriPHY | |||
| 1.3.6.1.4.1.5205.2.51.4.5.9.1 | Scalargel2esw10gVeriPHYTest | read-write | current | Run VeriPHY Cable Diagnostics. port, range : 0 - port number. 0 : ALL |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2 | Tablegel2esw10gVeriPHYTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1 | Rowgel2esw10gVeriPHYEntry | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.1 | Columngel2esw10gVeriPHYPort | not-accessible | current | The length (in meters) of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.2 | Columngel2esw10gVeriPHYPairA | read-only | current | The status of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.3 | Columngel2esw10gVeriPHYLengthA | read-only | current | The length (in meters) of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.4 | Columngel2esw10gVeriPHYPairB | read-only | current | The status of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.5 | Columngel2esw10gVeriPHYLengthB | read-only | current | The length (in meters) of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.6 | Columngel2esw10gVeriPHYPairC | read-only | current | The status of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.7 | Columngel2esw10gVeriPHYLengthC | read-only | current | The length (in meters) of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.8 | Columngel2esw10gVeriPHYPairD | read-only | current | The status of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.4.5.9.2.1.9 | Columngel2esw10gVeriPHYLengthD | read-only | current | The length (in meters) of the cable pair. |
| 1.3.6.1.4.1.5205.2.51.5 | Nodegel2esw10gTrap | |||
| 1.3.6.1.4.1.5205.2.51.5.1 | Nodegel2esw10gTrapEvent | |||
| 1.3.6.1.4.1.5205.2.51.5.1.1 | Notificationgel2esw10gEmergency | current | The severity level is Emergency. The system is unusable. | |
| 1.3.6.1.4.1.5205.2.51.5.1.2 | Notificationgel2esw10gAlert | current | The severity level is Alert. The action must be taken immediately. | |
| 1.3.6.1.4.1.5205.2.51.5.1.3 | Notificationgel2esw10gCritical | current | The severity level is Critical. Critical conditions. | |
| 1.3.6.1.4.1.5205.2.51.5.1.4 | Notificationgel2esw10gError | current | The severity level is Error. Error conditions. | |
| 1.3.6.1.4.1.5205.2.51.5.1.5 | Notificationgel2esw10gWarning | current | The severity level is Warning. Warning conditions. | |
| 1.3.6.1.4.1.5205.2.51.5.1.6 | Notificationgel2esw10gNotice | current | The severity level is Notice. Normal but significant condition. | |
| 1.3.6.1.4.1.5205.2.51.5.1.7 | Notificationgel2esw10gInformational | current | The severity level is Informational. Informational messages. | |
| 1.3.6.1.4.1.5205.2.51.5.1.8 | Notificationgel2esw10gDebug | current | The severity level is Debug. debug-level messages. | |
| 1.3.6.1.4.1.5205.2.51.5.2 | Nodegel2esw10gTrapVariable | |||
| 1.3.6.1.4.1.5205.2.51.5.2.1 | Scalargel2esw10gInformation | read-only | current | Trap information. |