PRIVATETECH-OP-MEN99810B-MIB

862 objects

No module-level DESCRIPTION found.

Imported Objects

BRIDGE-MIB	MacAddress
INET-ADDRESS-MIB	InetAddress
RFC1213-MIB	ifIndex
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.5205	Identityprivatetech
1.3.6.1.4.1.5205.2	Nodeswitch
1.3.6.1.4.1.5205.2.94	Nodeopmen99810bProductId
1.3.6.1.4.1.5205.2.94.1	Nodeopmen99810bSystem
1.3.6.1.4.1.5205.2.94.1.1	Nodeopmen99810bSystemInformation
1.3.6.1.4.1.5205.2.94.1.1.1	Scalaropmen99810bModelName	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.2	Scalaropmen99810bBIOSVersion	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.3	Scalaropmen99810bFirmwareVersion	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.4	Scalaropmen99810bHardwareMechanicalVersion	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.5	Scalaropmen99810bSerialNumber	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.6	Scalaropmen99810bHostMACAddress	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.7	Scalaropmen99810bConsoleBaudrate	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.8	Scalaropmen99810bRAMSize	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.9	Scalaropmen99810bFlashSize	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.10	Scalaropmen99810bBridgeFBDSize	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.11	Scalaropmen99810bTransmitQueue	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.12	Scalaropmen99810bMaximumFrameSize	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.13	Scalaropmen99810bCPULoad	read-only	current
1.3.6.1.4.1.5205.2.94.1.1.14	Scalaropmen99810bPowerSource	read-only	current	Power Source
1.3.6.1.4.1.5205.2.94.1.2	Nodeopmen99810bSystemTime
1.3.6.1.4.1.5205.2.94.1.2.1	Nodeopmen99810bSystemTimeManual
1.3.6.1.4.1.5205.2.94.1.2.1.1	Scalaropmen99810bSystemTimeManualClockSource	read-write	current	default: 0, 0 : Use Local Settings, 1 : Use NTP Server.
1.3.6.1.4.1.5205.2.94.1.2.1.2	Scalaropmen99810bSystemTimeManualLocaltime	read-write	current	Get/Set the system time of the device. The input format is 'Year-Month-Day Hour:Minute:Second'. ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 . The value r…
1.3.6.1.4.1.5205.2.94.1.2.1.3	Scalaropmen99810bSystemTimeManualTimeZoneOffset	read-write	current	Get/Set the NTP Time Zone. The value range is between -720 and 780 (minutes).
1.3.6.1.4.1.5205.2.94.1.2.1.4	Scalaropmen99810bSystemTimeManualDaylightSavings	read-write	current	default: 0, 0 : Disable, 1 : Enable.
1.3.6.1.4.1.5205.2.94.1.2.1.5	Scalaropmen99810bSystemTimeManualTimeSetOffset	read-write	current	Get/Set the Daylight Saving Time. The value range is between 1 and 1440 (minutes), Default : 60 (minutes).
1.3.6.1.4.1.5205.2.94.1.2.1.6	Scalaropmen99810bSystemTimeManualDaylightSavingsType	read-write	current	default: 0, 0 : By dates, 1 : Recurring.
1.3.6.1.4.1.5205.2.94.1.2.1.7	Scalaropmen99810bSystemTimeManualDaylightSavingsBydatesFrom	read-write	current	Get/Set the Start time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value …
1.3.6.1.4.1.5205.2.94.1.2.1.8	Scalaropmen99810bSystemTimeManualDaylightSavingsBydatesTo	read-write	current	Get/Set the End time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value ra…
1.3.6.1.4.1.5205.2.94.1.2.1.9	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringDayFrom	read-write	current	Get/Set the Daylight Saving Time Day From. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.
1.3.6.1.4.1.5205.2.94.1.2.1.10	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringWeekFrom	read-write	current	Get/Set the Daylight Saving Time Week From. 1 : first week, 2, 3, 4, 5 : last week
1.3.6.1.4.1.5205.2.94.1.2.1.11	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringMonthFrom	read-write	current	Get/Set the Daylight Saving Time Month From. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.
1.3.6.1.4.1.5205.2.94.1.2.1.12	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringTimeFrom	read-write	current	Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59.
1.3.6.1.4.1.5205.2.94.1.2.1.13	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringDayTo	read-write	current	Get/Set the Daylight Saving Time Day To. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.
1.3.6.1.4.1.5205.2.94.1.2.1.14	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringWeekTo	read-write	current	Get/Set the Daylight Saving Time Week To. 1 : first week, 2, 3, 4, 5 : last week
1.3.6.1.4.1.5205.2.94.1.2.1.15	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringMonthTo	read-write	current	Get/Set the Daylight Saving Time Month To. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.
1.3.6.1.4.1.5205.2.94.1.2.1.16	Scalaropmen99810bSystemTimeManualDaylightSavingsRecurringTimeTo	read-write	current	Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59.
1.3.6.1.4.1.5205.2.94.1.2.2	Nodeopmen99810bSystemTimeNTP
1.3.6.1.4.1.5205.2.94.1.2.2.1	Tableopmen99810bSystemTimeNTPTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.2.2.1.1	Rowopmen99810bSystemTimeNTPEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.2.2.1.1.1	Columnopmen99810bSystemTimeNTPIndex	not-accessible	current	The index of the ntp entry.
1.3.6.1.4.1.5205.2.94.1.2.2.1.1.2	Columnopmen99810bSystemTimeNTPServerIPType	read-write	current	Default: 0, 0 : IPv4, 1 : IPv6.
1.3.6.1.4.1.5205.2.94.1.2.2.1.1.3	Columnopmen99810bSystemTimeNTPServer	read-write	current	Get/Set the NTP Time Server1. You can use the IP address or domain name.
1.3.6.1.4.1.5205.2.94.1.2.2.1.1.4	Columnopmen99810bSystemTimeNTPCurrentMode	read-write	current	0: Empty 1: Active 2: Edit 3: Delete
1.3.6.1.4.1.5205.2.94.1.3	Nodeopmen99810bSystemAccount
1.3.6.1.4.1.5205.2.94.1.3.1	Nodeopmen99810bSystemAccountUsers
1.3.6.1.4.1.5205.2.94.1.3.1.1	Scalaropmen99810bSystemAccountUserCreate	read-write	current	default: 0 0 : None (read only) 1 : Create a user account
1.3.6.1.4.1.5205.2.94.1.3.1.2	Tableopmen99810bSystemAccountUsersTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.3.1.2.1	Rowopmen99810bSystemAccountUsersEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.3.1.2.1.1	Columnopmen99810bUserIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.3.1.2.1.2	Columnopmen99810bUserName	read-write	current	Please use a combination of letters, numbers and underscores
1.3.6.1.4.1.5205.2.94.1.3.1.2.1.3	Columnopmen99810bPassword	read-write	current	Please use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)
1.3.6.1.4.1.5205.2.94.1.3.1.2.1.4	Columnopmen99810bUserPrivilegeLevel	read-write	current	default:1 User privilege level range : 1 - 15
1.3.6.1.4.1.5205.2.94.1.3.1.2.1.5	Columnopmen99810bAccountUserRowStatus	read-write	current	1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.5205.2.94.1.3.2	Nodeopmen99810bSystemAccountPrivilegeLevel
1.3.6.1.4.1.5205.2.94.1.3.2.1	Scalaropmen99810bAccountPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.2	Scalaropmen99810bAggregationPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.3	Scalaropmen99810bDiagnosticsPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.4	Scalaropmen99810bEEEPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.9	Scalaropmen99810bEasyportPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.10	Scalaropmen99810bGARPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.11	Scalaropmen99810bGVRPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.12	Scalaropmen99810bIPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.13	Scalaropmen99810bIPMCSnoopingPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.14	Scalaropmen99810bLACPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.15	Scalaropmen99810bLLDPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.16	Scalaropmen99810bLLDPMEDPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.17	Scalaropmen99810bLoopProtectPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.18	Scalaropmen99810bMACTablePrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.22	Scalaropmen99810bMVRPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.24	Scalaropmen99810bMaintenancePrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.25	Scalaropmen99810bMirroringPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.27	Scalaropmen99810bPortsPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.28	Scalaropmen99810bPrivateVLANsPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.29	Scalaropmen99810bQoSPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.30	Scalaropmen99810bSFlowPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.31	Scalaropmen99810bSMTPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.32	Scalaropmen99810bSNMPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.33	Scalaropmen99810bSecurityPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.34	Scalaropmen99810bSingleIPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.35	Scalaropmen99810bSpanningTreePrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.36	Scalaropmen99810bSystemPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.37	Scalaropmen99810bTrapEventPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.38	Scalaropmen99810bUPnPPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.39	Scalaropmen99810bVCLPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.41	Scalaropmen99810bVLANsPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.3.2.42	Scalaropmen99810bVoiceVLANPrivilegeLevel	read-write	current	Default:10, Range : 1-15.
1.3.6.1.4.1.5205.2.94.1.4	Nodeopmen99810bIP
1.3.6.1.4.1.5205.2.94.1.4.1	Nodeopmen99810bIPv4
1.3.6.1.4.1.5205.2.94.1.4.1.1	Nodeopmen99810bIPv4Configured
1.3.6.1.4.1.5205.2.94.1.4.1.1.1	Scalaropmen99810bIpv4DHCPClient	read-write	current	default:0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.1.4.1.1.2	Scalaropmen99810bIPv4Address	read-write	current
1.3.6.1.4.1.5205.2.94.1.4.1.1.3	Scalaropmen99810bIPv4Mask	read-write	current
1.3.6.1.4.1.5205.2.94.1.4.1.1.4	Scalaropmen99810bIPv4Gateway	read-write	current
1.3.6.1.4.1.5205.2.94.1.4.1.1.5	Scalaropmen99810bIPv4VLANId	read-write	current	default:1
1.3.6.1.4.1.5205.2.94.1.4.1.1.6	Scalaropmen99810bIPv4DNSServer	read-write	current
1.3.6.1.4.1.5205.2.94.1.4.1.1.7	Scalaropmen99810bIPv4DNSProxy	read-write	current	0:disable, 1:enable
1.3.6.1.4.1.5205.2.94.1.4.1.2	Nodeopmen99810bIPv4Current
1.3.6.1.4.1.5205.2.94.1.4.1.2.1	Scalaropmen99810bIpv4CurrentDHCPClient	read-write	current	default:0 0: none (for read) 1: renew
1.3.6.1.4.1.5205.2.94.1.4.1.2.2	Scalaropmen99810bIPv4CurrentAddress	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.1.2.3	Scalaropmen99810bIPv4CurrentMask	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.1.2.4	Scalaropmen99810bIPv4CurrentGateway	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.1.2.5	Scalaropmen99810bIPv4CurrentVLANId	read-only	current	default:1
1.3.6.1.4.1.5205.2.94.1.4.1.2.6	Scalaropmen99810bIPv4CurrentDNSServer	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.2	Nodeopmen99810bIPv6
1.3.6.1.4.1.5205.2.94.1.4.2.1	Nodeopmen99810bIPv6Configured
1.3.6.1.4.1.5205.2.94.1.4.2.1.1	Scalaropmen99810bIpv6AutoConfiguration	read-write	current	default:0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.1.4.2.1.2	Scalaropmen99810bIpv6Address	read-write	current
1.3.6.1.4.1.5205.2.94.1.4.2.1.3	Scalaropmen99810bIpv6Prefix	read-write	current	default: 96
1.3.6.1.4.1.5205.2.94.1.4.2.1.4	Scalaropmen99810bIpv6Gateway	read-write	current
1.3.6.1.4.1.5205.2.94.1.4.2.2	Nodeopmen99810bIPv6Current
1.3.6.1.4.1.5205.2.94.1.4.2.2.1	Scalaropmen99810bIpv6CurrentAutoConfiguration	read-only	current	default:0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.1.4.2.2.2	Scalaropmen99810bIpv6CurrentAddress	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.2.2.3	Scalaropmen99810bIpv6CurrentLinkLocalAddress	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.2.2.4	Scalaropmen99810bIpv6CurrentPrefix	read-only	current
1.3.6.1.4.1.5205.2.94.1.4.2.2.5	Scalaropmen99810bIpv6CurrentGateway	read-only	current
1.3.6.1.4.1.5205.2.94.1.5	Nodeopmen99810bSyslog
1.3.6.1.4.1.5205.2.94.1.5.1	Nodeopmen99810bSyslogConf
1.3.6.1.4.1.5205.2.94.1.5.1.1	Scalaropmen99810bServerMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.1.5.1.2	Scalaropmen99810bServerAddress1	read-write	current
1.3.6.1.4.1.5205.2.94.1.5.1.3	Scalaropmen99810bServerAddress2	read-write	current
1.3.6.1.4.1.5205.2.94.1.5.1.4	Scalaropmen99810bSyslogLevel	read-write	current	default: 6 (Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.1.5.2	Nodeopmen99810bSyslogDetailedInfo
1.3.6.1.4.1.5205.2.94.1.5.2.1	Scalaropmen99810bSyslogDetailedInfoClear	read-write	current	default: 0 0 : None (read only) 1 : Clear Syslog
1.3.6.1.4.1.5205.2.94.1.5.2.2	Tableopmen99810bSyslogDetailedInfoTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.5.2.2.1	Rowopmen99810bSyslogDetailedInfoEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.5.2.2.1.1	Columnopmen99810bSyslogDetailedInfoIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.1.5.2.2.1.2	Columnopmen99810bSyslogDetailedInfoLevel	read-only	current
1.3.6.1.4.1.5205.2.94.1.5.2.2.1.3	Columnopmen99810bSyslogDetailedInfoTime	read-only	current
1.3.6.1.4.1.5205.2.94.1.5.2.2.1.4	Columnopmen99810bSyslogDetailedInfoMessage	read-only	current
1.3.6.1.4.1.5205.2.94.1.6	Nodeopmen99810bSnmp
1.3.6.1.4.1.5205.2.94.1.6.1	Nodeopmen99810bSnmpConf
1.3.6.1.4.1.5205.2.94.1.6.1.1	Scalaropmen99810bGetCommunity	read-write	current	Get/Set the get-community of the SNMP.
1.3.6.1.4.1.5205.2.94.1.6.1.2	Scalaropmen99810bSetCommunityMode	read-write	current	Get/Set the set-community mode of the SNMP. default : 1, 0: disable, 1: enable.
1.3.6.1.4.1.5205.2.94.1.6.1.3	Scalaropmen99810bSetCommunity	read-write	current	Get/Set the set-community of the SNMP.
1.3.6.1.4.1.5205.2.94.1.6.1.4	Tableopmen99810bTrapHostConfTable	not-accessible	current	A list of trap host entry. The numbers of entries are given by the value of opmen99810bTrapHostConfNumber.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1	Rowopmen99810bTrapHostConfEntry	not-accessible	current	This is the entry information for trap host.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.1	Columnopmen99810bTrapHostConfIndex	not-accessible	current	The index of the trap host entry.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.2	Columnopmen99810bTrapHostConfVersion	read-write	current	The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.3	Columnopmen99810bTrapHostConfIPType	read-write	current	Server IP Type. Default: 4, 4 : IPv4, 6 : IPv6.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.4	Columnopmen99810bTrapHostConfIP	read-write	current	This is the IP of the trap host.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.5	Columnopmen99810bTrapHostConfPort	read-write	current	This is the receiving-port number of the trap host. range : 1 - 65535.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.6	Columnopmen99810bTrapHostConfCommunity	read-write	current	The community/security name for the trap PDU.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.7	Columnopmen99810bTrapHostConfSeverityLevel	read-write	current	The Severity Level. 0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.8	Columnopmen99810bTrapHostConfSecurityLevel	read-write	current	The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. 1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automa…
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.9	Columnopmen99810bTrapHostConfAuthPtc	read-write	current	Authentication Protocol, there are SHA and MD5 supported presently. 1 : MD5, 2 : SHA.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.10	Columnopmen99810bTrapHostConfAuthPassword	read-write	current	Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password shoul…
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.11	Columnopmen99810bTrapHostConfPrivPtc	read-write	current	This is the Privacy Protocol, which is used in AuthPriv. Only supports DES. An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.12	Columnopmen99810bTrapHostConfPrivPassword	read-write	current	The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters.
1.3.6.1.4.1.5205.2.94.1.6.1.4.1.13	Columnopmen99810bTrapHostConfCurrentMode	read-write	current	0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.
1.3.6.1.4.1.5205.2.94.2	Nodeopmen99810bConfiguration
1.3.6.1.4.1.5205.2.94.2.1	Nodeopmen99810bPort
1.3.6.1.4.1.5205.2.94.2.1.1	Tableopmen99810bPortConfigurationTable	not-accessible	current	Show port configurations.
1.3.6.1.4.1.5205.2.94.2.1.1.1	Rowopmen99810bPortConfigurationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.1.1.1	Columnopmen99810bPortConfPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.1.1.1.2	Columnopmen99810bPortConfPortMedia	read-only	current	Show port media.
1.3.6.1.4.1.5205.2.94.2.1.1.1.3	Columnopmen99810bPortConfLink	read-only	current	The current link state.
1.3.6.1.4.1.5205.2.94.2.1.1.1.4	Columnopmen99810bPortConfCurrentSpeed	read-only	current	The current link speed of the port.
1.3.6.1.4.1.5205.2.94.2.1.1.1.5	Columnopmen99810bPortConfSpeed	read-write	current	default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port d…
1.3.6.1.4.1.5205.2.94.2.1.1.1.6	Columnopmen99810bPortConfCurrentFlowControlRx	read-only	current	0: disable 1: enable 2: no support.
1.3.6.1.4.1.5205.2.94.2.1.1.1.7	Columnopmen99810bPortConfCurrentFlowControlTx	read-only	current	0: disable 1: enable 2: no support.
1.3.6.1.4.1.5205.2.94.2.1.1.1.8	Columnopmen99810bPortConfFlowControl	read-write	current	default: 0, 0: disable 1: enable 2: no support.
1.3.6.1.4.1.5205.2.94.2.1.1.1.9	Columnopmen99810bPortConfMaxFrameSize	read-write	current	default: 9600 , range : 1518 - 9600
1.3.6.1.4.1.5205.2.94.2.1.1.1.10	Columnopmen99810bPortConfExcessiveCollisionMode	read-write	current	default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: no support.
1.3.6.1.4.1.5205.2.94.2.1.1.1.11	Columnopmen99810bPortConfPowerControl	read-write	current	default: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: no support.
1.3.6.1.4.1.5205.2.94.2.1.1.1.12	Columnopmen99810bPortConfDescription	read-write	current	Interface specific description. Up to 47 characters describing this interface.
1.3.6.1.4.1.5205.2.94.2.1.2	Tableopmen99810bPortTrafficStatisticsTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.2.1	Rowopmen99810bPortTrafficStatisticsEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.1	Columnopmen99810bPortTrafficStatisticsPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.2	Columnopmen99810bPortTrafficStatisticsClear	read-write	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.3	Columnopmen99810bPortTrafficRxPackets	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.4	Columnopmen99810bPortTrafficRxOctets	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.5	Columnopmen99810bPortTrafficRxUnicast	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.6	Columnopmen99810bPortTrafficRxMulticast	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.7	Columnopmen99810bPortTrafficRxBroadcast	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.8	Columnopmen99810bPortTrafficRxPause	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.9	Columnopmen99810bPortTrafficRx64Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.10	Columnopmen99810bPortTrafficRx65to127Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.11	Columnopmen99810bPortTrafficRx128to255Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.12	Columnopmen99810bPortTrafficRx256to511Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.13	Columnopmen99810bPortTrafficRx512to1023Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.14	Columnopmen99810bPortTrafficRx1024to1526Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.15	Columnopmen99810bPortTrafficRxExceecd1527Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.16	Columnopmen99810bPortTrafficRxQ0	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.17	Columnopmen99810bPortTrafficRxQ1	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.18	Columnopmen99810bPortTrafficRxQ2	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.19	Columnopmen99810bPortTrafficRxQ3	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.20	Columnopmen99810bPortTrafficRxQ4	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.21	Columnopmen99810bPortTrafficRxQ5	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.22	Columnopmen99810bPortTrafficRxQ6	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.23	Columnopmen99810bPortTrafficRxQ7	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.24	Columnopmen99810bPortTrafficRxDrops	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.25	Columnopmen99810bPortTrafficRxCRCorAlignment	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.26	Columnopmen99810bPortTrafficRxUndersize	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.27	Columnopmen99810bPortTrafficRxOversize	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.28	Columnopmen99810bPortTrafficRxFragments	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.29	Columnopmen99810bPortTrafficRxJabber	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.30	Columnopmen99810bPortTrafficRxFiltered	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.31	Columnopmen99810bPortTrafficTxPackets	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.32	Columnopmen99810bPortTrafficTxOctets	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.33	Columnopmen99810bPortTrafficTxUnicast	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.34	Columnopmen99810bPortTrafficTxMulticast	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.35	Columnopmen99810bPortTrafficTxBroadcast	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.36	Columnopmen99810bPortTrafficTxPause	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.37	Columnopmen99810bPortTrafficTx64Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.38	Columnopmen99810bPortTrafficTx65to127Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.39	Columnopmen99810bPortTrafficTx128to255Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.40	Columnopmen99810bPortTrafficTx256to511Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.41	Columnopmen99810bPortTrafficTx512to1023Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.42	Columnopmen99810bPortTrafficTx1024to1526Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.43	Columnopmen99810bPortTrafficTxExceecd1527Bytes	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.44	Columnopmen99810bPortTrafficTxQ0	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.45	Columnopmen99810bPortTrafficTxQ1	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.46	Columnopmen99810bPortTrafficTxQ2	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.47	Columnopmen99810bPortTrafficTxQ3	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.48	Columnopmen99810bPortTrafficTxQ4	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.49	Columnopmen99810bPortTrafficTxQ5	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.50	Columnopmen99810bPortTrafficTxQ6	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.51	Columnopmen99810bPortTrafficTxQ7	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.52	Columnopmen99810bPortTrafficTxDrops	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.2.1.53	Columnopmen99810bPortTrafficTxLateOrExcColl	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3	Nodeopmen99810bPortQoSStatistics
1.3.6.1.4.1.5205.2.94.2.1.3.1	Scalaropmen99810bPortQoSStatisticsClear	read-only	current	default: 0 0: none 1: clear
1.3.6.1.4.1.5205.2.94.2.1.3.2	Tableopmen99810bPortQoSStatisticsTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1	Rowopmen99810bPortQoSStatisticsEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.1	Columnopmen99810bPortQoSStatisticsPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.2	Columnopmen99810bPortQoSQ0Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.3	Columnopmen99810bPortQoSQ0Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.4	Columnopmen99810bPortQoSQ1Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.5	Columnopmen99810bPortQoSQ1Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.6	Columnopmen99810bPortQoSQ2Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.7	Columnopmen99810bPortQoSQ2Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.8	Columnopmen99810bPortQoSQ3Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.9	Columnopmen99810bPortQoSQ3Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.10	Columnopmen99810bPortQoSQ4Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.11	Columnopmen99810bPortQoSQ4Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.12	Columnopmen99810bPortQoSQ5Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.13	Columnopmen99810bPortQoSQ5Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.14	Columnopmen99810bPortQoSQ6Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.15	Columnopmen99810bPortQoSQ6Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.16	Columnopmen99810bPortQoSQ7Rx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.3.2.1.17	Columnopmen99810bPortQoSQ7Tx	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4	Tableopmen99810bSFPInfoTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.4.1	Rowopmen99810bSFPInfoEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.1	Columnopmen99810bSFPInfoIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.2	Columnopmen99810bSFPInfoPort	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.3	Columnopmen99810bSFPConnectorType	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.4	Columnopmen99810bSFPFiberType	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.5	Columnopmen99810bSFPTxCentralWavelength	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.6	Columnopmen99810bSFPBaudRate	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.7	Columnopmen99810bSFPVendorOUI	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.8	Columnopmen99810bSFPVendorName	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.9	Columnopmen99810bSFPVendorPN	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.10	Columnopmen99810bSFPVendorRev	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.11	Columnopmen99810bSFPVendorSN	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.12	Columnopmen99810bSFPDateCode	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.13	Columnopmen99810bSFPTemperature	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.14	Columnopmen99810bSFPVcc	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.15	Columnopmen99810bSFPMon1Bias	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.16	Columnopmen99810bSFPMon2TxPWR	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.4.1.17	Columnopmen99810bSFPMon3RxPWR	read-only	current
1.3.6.1.4.1.5205.2.94.2.1.5	Tableopmen99810bPortEEETable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.5.1	Rowopmen99810bPortEEEEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.5.1.1	Columnopmen99810bPortEEEPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.1.5.1.2	Columnopmen99810bPortEEEMode	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.3	Columnopmen99810bPortEEEUrgentQueue1	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.4	Columnopmen99810bPortEEEUrgentQueue2	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.5	Columnopmen99810bPortEEEUrgentQueue3	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.6	Columnopmen99810bPortEEEUrgentQueue4	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.7	Columnopmen99810bPortEEEUrgentQueue5	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.8	Columnopmen99810bPortEEEUrgentQueue6	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.9	Columnopmen99810bPortEEEUrgentQueue7	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.1.5.1.10	Columnopmen99810bPortEEEUrgentQueue8	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.2.2	Nodeopmen99810bVoiceVLAN
1.3.6.1.4.1.5205.2.94.2.2.1	Nodeopmen99810bVoiceVLANConf
1.3.6.1.4.1.5205.2.94.2.2.1.1	Scalaropmen99810bVoiceVLANMode	read-write	current	Voice VLAN mode operation. default: 0, 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.2.2.1.2	Scalaropmen99810bVoiceVLANVLANId	read-write	current	Voice VLAN ID. default: 1000, range : 1-4094.
1.3.6.1.4.1.5205.2.94.2.2.1.3	Scalaropmen99810bVoiceVLANAgingTime	read-write	current	Voice VLAN secure learning aging time. default: 86400, range : 10 - 10000000.
1.3.6.1.4.1.5205.2.94.2.2.1.4	Scalaropmen99810bVoiceVLANTrafficClass	read-write	current	Voice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7.
1.3.6.1.4.1.5205.2.94.2.2.1.5	Tableopmen99810bVoiceVLANPortTable	not-accessible	current	Show Voice Vlan configuration.
1.3.6.1.4.1.5205.2.94.2.2.1.5.1	Rowopmen99810bVoiceVLANPortEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.2.1.5.1.1	Columnopmen99810bVoiceVLANPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.2.1.5.1.2	Columnopmen99810bVoiceVLANPortMode	read-write	current	Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to th…
1.3.6.1.4.1.5205.2.94.2.2.1.5.1.3	Columnopmen99810bVoiceVLANPortSecurity	read-write	current	Voice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all…
1.3.6.1.4.1.5205.2.94.2.2.1.5.1.4	Columnopmen99810bVoiceVLANPortDiscoveryProtocol	read-write	current	Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI an…
1.3.6.1.4.1.5205.2.94.2.2.2	Nodeopmen99810bVoiceVLANOUI
1.3.6.1.4.1.5205.2.94.2.2.2.1	Scalaropmen99810bVoiceVLANOUICreate	read-write	current	default: 0 0 : None (read only) 1 : Create an OUI entry
1.3.6.1.4.1.5205.2.94.2.2.2.2	Tableopmen99810bVoiceVLANOUITable	not-accessible	current	Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process.
1.3.6.1.4.1.5205.2.94.2.2.2.2.1	Rowopmen99810bVoiceVLANOUIEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.2.2.2.1.1	Columnopmen99810bVoiceVLANOUIIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.2.2.2.1.2	Columnopmen99810bVoiceVLANTelephonyOUI	read-write	current	OUI address, format : 0a 1b 2c
1.3.6.1.4.1.5205.2.94.2.2.2.2.1.3	Columnopmen99810bVoiceVLANDescription	read-write	current	Up to 32 characters describing OUI address.
1.3.6.1.4.1.5205.2.94.2.2.2.2.1.4	Columnopmen99810bVoiceVLANOUIRowStatus	read-write	current	1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.5205.2.94.2.3	Nodeopmen99810bGARP
1.3.6.1.4.1.5205.2.94.2.3.1	Tableopmen99810bGARPConfTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.3.1.1	Rowopmen99810bGARPConfEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.3.1.1.1	Columnopmen99810bGARPConfPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.3.1.1.2	Columnopmen99810bGARPJoinTimer	read-write	current	default: 200, range : 200 - 1000
1.3.6.1.4.1.5205.2.94.2.3.1.1.3	Columnopmen99810bGARPLeaveTimer	read-write	current	default: 600 , range : 600 - 3000
1.3.6.1.4.1.5205.2.94.2.3.1.1.4	Columnopmen99810bGARPLeaveAllTimer	read-write	current	default: 10000, range : 10000 - 50000
1.3.6.1.4.1.5205.2.94.2.3.1.1.5	Columnopmen99810bGARPApplicantion	read-write	current	default: 1 1: GVRP
1.3.6.1.4.1.5205.2.94.2.3.1.1.6	Columnopmen99810bGARPAttributeType	read-write	current	default: 1 1: VLAN
1.3.6.1.4.1.5205.2.94.2.3.1.1.7	Columnopmen99810bGARPApplicant	read-write	current	default: 0 0: normal-participant 1: non-participant
1.3.6.1.4.1.5205.2.94.2.3.2	Tableopmen99810bGARPStatisticsTable	not-accessible	current	Show the basic GARP port statistics.
1.3.6.1.4.1.5205.2.94.2.3.2.1	Rowopmen99810bGARPStatisticsEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.3.2.1.1	Columnopmen99810bGARPStatisticsPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.3.2.1.2	Columnopmen99810bGARPStatisticsPeerMAC	read-only	current	Peer MAC is MAC address of the neighbour Switch from with GARP frame is received.
1.3.6.1.4.1.5205.2.94.2.3.2.1.3	Columnopmen99810bGARPStatisticsFailedCount	read-only	current	explain Failed count here.
1.3.6.1.4.1.5205.2.94.2.4	Nodeopmen99810bGVRP
1.3.6.1.4.1.5205.2.94.2.4.1	Nodeopmen99810bGVRPConf
1.3.6.1.4.1.5205.2.94.2.4.1.1	Scalaropmen99810bGVRPMode	read-write	current	default: 0, 0: disable, 1: enable.
1.3.6.1.4.1.5205.2.94.2.4.1.2	Tableopmen99810bGVRPConfTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.4.1.2.1	Rowopmen99810bGVRPConfEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.4.1.2.1.1	Columnopmen99810bGVRPConfPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.4.1.2.1.2	Columnopmen99810bGVRPConfPortMode	read-write	current	default: 0 1: enable 0: disable
1.3.6.1.4.1.5205.2.94.2.4.1.2.1.3	Columnopmen99810bGVRPConfPortRRole	read-write	current	default: 0 1: enable 0: disable
1.3.6.1.4.1.5205.2.94.2.4.2	Tableopmen99810bGVRPStatisticsTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.4.2.1	Rowopmen99810bGVRPStatisticsEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.4.2.1.1	Columnopmen99810bGVRPStatisticsPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.4.2.1.2	Columnopmen99810bGVRPStatisticsJoinTxCnt	read-only	current
1.3.6.1.4.1.5205.2.94.2.4.2.1.3	Columnopmen99810bGVRPStatisticsLeaveTxCnt	read-only	current
1.3.6.1.4.1.5205.2.94.2.6	Nodeopmen99810bMirroring
1.3.6.1.4.1.5205.2.94.2.6.1	Scalaropmen99810bPortToMirrorOn	read-write	current	default: 0 0: disable, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.6.2	Tableopmen99810bMirrorTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.6.2.1	Rowopmen99810bMirrorEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.6.2.1.1	Columnopmen99810bMirrorPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.6.2.1.2	Columnopmen99810bMirrorMode	read-write	current	default: 0 0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored
1.3.6.1.4.1.5205.2.94.2.7	Nodeopmen99810bTrapEventSeverity
1.3.6.1.4.1.5205.2.94.2.7.1	Scalaropmen99810bTrapEventSeverityACL	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.2	Scalaropmen99810bTrapEventSeverityACLLog	read-write	current	default: 7(Debug) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.3	Scalaropmen99810bTrapEventSeverityAccessMgmt	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.4	Scalaropmen99810bTrapEventSeverityAuthFailed	read-write	current	default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.5	Scalaropmen99810bTrapEventSeverityColdStart	read-write	current	default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.6	Scalaropmen99810bTrapEventSeverityConfigInfo	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.7	Scalaropmen99810bTrapEventSeverityFirmwareUpgrade	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.8	Scalaropmen99810bTrapEventSeverityImportExport	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.9	Scalaropmen99810bTrapEventSeverityLACP	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.10	Scalaropmen99810bTrapEventSeverityLinkStatus	read-write	current	default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.11	Scalaropmen99810bTrapEventSeverityLogin	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.12	Scalaropmen99810bTrapEventSeverityLogout	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.13	Scalaropmen99810bTrapEventSeverityLoopProtect	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.14	Scalaropmen99810bTrapEventSeverityMgmtIPChange	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.15	Scalaropmen99810bTrapEventSeverityModuleChange	read-write	current	default: 5(Notice) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.16	Scalaropmen99810bTrapEventSeverityNAS	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.17	Scalaropmen99810bTrapEventSeverityPasswordChange	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.18	Scalaropmen99810bTrapEventSeverityPortSecurity	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.20	Scalaropmen99810bTrapEventSeverityVLAN	read-write	current	default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.7.21	Scalaropmen99810bTrapEventSeverityWarmStart	read-write	current	default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.8	Nodeopmen99810bSMTP
1.3.6.1.4.1.5205.2.94.2.8.1	Scalaropmen99810bSMTPMailServer	read-write	current	Up to 47 characters describing email server.
1.3.6.1.4.1.5205.2.94.2.8.2	Scalaropmen99810bSMTPUserName	read-write	current	Up to 47 characters describing user name.
1.3.6.1.4.1.5205.2.94.2.8.3	Scalaropmen99810bSMTPPassword	read-write	current	Up to 47 characters describing password.
1.3.6.1.4.1.5205.2.94.2.8.4	Scalaropmen99810bSMTPServeriryLevel	read-write	current	default: 6 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.5205.2.94.2.8.5	Scalaropmen99810bSMTPSender	read-write	current	Up to 47 characters describing sender.
1.3.6.1.4.1.5205.2.94.2.8.6	Scalaropmen99810bSMTPReturnPath	read-write	current	Up to 47 characters describing return path.
1.3.6.1.4.1.5205.2.94.2.8.7	Scalaropmen99810bSMTPPort	read-write	current	get/set smtp port, default: 25
1.3.6.1.4.1.5205.2.94.2.8.8	Scalaropmen99810bSMTPEmailAddress1	read-write	current	Up to 47 characters describing mail address.
1.3.6.1.4.1.5205.2.94.2.8.9	Scalaropmen99810bSMTPEmailAddress2	read-write	current	Up to 47 characters describing mail address.
1.3.6.1.4.1.5205.2.94.2.8.10	Scalaropmen99810bSMTPEmailAddress3	read-write	current	Up to 47 characters describing mail address.
1.3.6.1.4.1.5205.2.94.2.8.11	Scalaropmen99810bSMTPEmailAddress4	read-write	current	Up to 47 characters describing mail address.
1.3.6.1.4.1.5205.2.94.2.8.12	Scalaropmen99810bSMTPEmailAddress5	read-write	current	Up to 47 characters describing mail address.
1.3.6.1.4.1.5205.2.94.2.8.13	Scalaropmen99810bSMTPEmailAddress6	read-write	current	Up to 47 characters describing mail address.
1.3.6.1.4.1.5205.2.94.2.9	Nodeopmen99810bACL
1.3.6.1.4.1.5205.2.94.2.9.1	Tableopmen99810bACLPortsConfTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.1.1	Rowopmen99810bACLPortsConfEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.1.1.1	Columnopmen99810bACLPortsConfPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.1.1.2	Columnopmen99810bACLPortsConfPolicyID	read-write	current	default: 0, range : 0 - 255
1.3.6.1.4.1.5205.2.94.2.9.1.1.3	Columnopmen99810bACLPortsConfAction	read-write	current	default: 1, 0: Deny 1: Permit
1.3.6.1.4.1.5205.2.94.2.9.1.1.4	Columnopmen99810bACLPortsConfRateLimiterID	read-write	current	default: 0, 0: Disable range : 0 - 12
1.3.6.1.4.1.5205.2.94.2.9.1.1.5	Columnopmen99810bACLPortsConfPortRedirect	read-write	current	default: 0 0: Disable range : 0 - end port number
1.3.6.1.4.1.5205.2.94.2.9.1.1.6	Columnopmen99810bACLPortsConfMirror	read-write	current	default: 0 0: Disable 1: Enable
1.3.6.1.4.1.5205.2.94.2.9.1.1.7	Columnopmen99810bACLPortsConfLogging	read-write	current	default: 0 0: Disable 1: Enable
1.3.6.1.4.1.5205.2.94.2.9.1.1.8	Columnopmen99810bACLPortsConfShutdown	read-write	current	default: 0 0: Disable 1: Enable
1.3.6.1.4.1.5205.2.94.2.9.1.1.9	Columnopmen99810bACLPortsConfState	read-write	current	default: 1 0: Disable 1: Enable
1.3.6.1.4.1.5205.2.94.2.9.1.1.10	Columnopmen99810bACLPortsConfCounter	read-only	current	Counts the number of frames that match this ACE.
1.3.6.1.4.1.5205.2.94.2.9.2	Tableopmen99810bACLRateLimiterTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.2.1	Rowopmen99810bACLRateLimiterEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.2.1.1	Columnopmen99810bACLRateLimiterID	not-accessible	current	Rate Limiter ID. range : 1-12
1.3.6.1.4.1.5205.2.94.2.9.2.1.2	Columnopmen99810bACLRateLimiterUnit	read-write	current	default: 0, 0: pps 1: kbps
1.3.6.1.4.1.5205.2.94.2.9.2.1.3	Columnopmen99810bACLRateLimiterRate	read-write	current	default: 1, range : <0-3276700> pps <0-10000> kbps
1.3.6.1.4.1.5205.2.94.2.9.3	Nodeopmen99810bACLACE
1.3.6.1.4.1.5205.2.94.2.9.3.1	Scalaropmen99810bACLACECreate	read-write	current	default: 0 0 : None (read only) 1 : Create an ACE entry
1.3.6.1.4.1.5205.2.94.2.9.3.2	Tableopmen99810bACLACETable	not-accessible	current	Create ACL ACE entry.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1	Rowopmen99810bACLACEEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.1	Columnopmen99810bACLACEIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.2	Columnopmen99810bACLACEID	read-write	current	If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.3	Columnopmen99810bACLACENextID	read-write	current	If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.4	Columnopmen99810bACLACEIngressPort	read-write	current	Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.5	Columnopmen99810bACLACEPortPolicyNumber	read-write	current	policy value. range : 0 - 255.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.6	Columnopmen99810bACLACEPortPolicyBitmask	read-write	current	policy bitmask. range : 0 - 255(0xff).
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.7	Columnopmen99810bACLACEFrameType	read-write	current	0: any, 1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.8	Columnopmen99810bACLACEAction	read-write	current	default: 1, 0: Deny 1: Permit
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.9	Columnopmen99810bACLACEDenyPortRedirect	read-write	current	Frames that hit the ACE are redirected to the port number specified here. Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.10	Columnopmen99810bACLACELogging	read-write	current	default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.11	Columnopmen99810bACLACEMirror	read-write	current	default: 0, 0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.12	Columnopmen99810bACLACERateLimiter	read-write	current	default: 0, 0: Disable range : 0 - 12
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.13	Columnopmen99810bACLACEShutdown	read-write	current	default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.14	Columnopmen99810bACLACEVLAN8021QTagged	read-write	current	Specify whether frames can hit the action according to the 802.1Q tagged. default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any -…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.15	Columnopmen99810bACLACEVLANTagPriority	read-write	current	Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.16	Columnopmen99810bACLACEVLANVID	read-write	current	Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.17	Columnopmen99810bACLACEEtherType	read-write	current	0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff).
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.18	Columnopmen99810bACLACESMAC	read-write	current	Configure source MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this source MAC address value. Any: Don't care.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.19	Columnopmen99810bACLACEDMACType	read-write	current	DMAC Type. default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unicast. 3: Multicast - Frame must be multicast.…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.20	Columnopmen99810bACLACEDMAC	read-write	current	Configure destination MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcas…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.21	Columnopmen99810bACLACEArpOpcode	read-write	current	Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 4
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.22	Columnopmen99810bACLACEArpFlagsRequestReply	read-write	current	Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.23	Columnopmen99810bACLACEArpFlagsArpSmac	read-write	current	Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.24	Columnopmen99810bACLACEArpFlagsRarpDmac	read-write	current	Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.25	Columnopmen99810bACLACEArpFlagsLength	read-write	current	Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.26	Columnopmen99810bACLACEArpFlagsIp	read-write	current	Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is no…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.27	Columnopmen99810bACLACEArpFlagsEthernet	read-write	current	Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is no…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.28	Columnopmen99810bACLACESIPType	read-write	current	Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.29	Columnopmen99810bACLACESIPIPAddress	read-write	current	A frame that hits this ACE matches this source IP address value.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.30	Columnopmen99810bACLACESIPNetworkPrefix	read-write	current	Network prefix. default: 32, 0: No data. range : 1 - 32
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.32	Columnopmen99810bACLACEDIPType	read-write	current	Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.33	Columnopmen99810bACLACEDIPIPAddress	read-write	current	A frame that hits this ACE matches this destination IP address value.
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.34	Columnopmen99810bACLACEDIPNetworkPrefix	read-write	current	Network prefix. default: 32, 0: No data. range : 1 - 32
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.36	Columnopmen99810bACLACEIPProtocol	read-write	current	Configure IP protocol for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.37	Columnopmen99810bACLACEIPFlagsTTL	read-write	current	Configure IP Time-to-Live flags for this ACE. default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field g…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.38	Columnopmen99810bACLACEIPFlagsOptions	read-write	current	Configure IP options flag for this ACE. default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don'…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.39	Columnopmen99810bACLACEIPFlagsFragment	read-write	current	Configure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames w…
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.40	Columnopmen99810bACLACEICMPType	read-write	current	Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.41	Columnopmen99810bACLACEICMPCode	read-write	current	Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.42	Columnopmen99810bACLACESourcePortMin	read-write	current	Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.43	Columnopmen99810bACLACESourcePortMax	read-write	current	Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.44	Columnopmen99810bACLACEDestPortMin	read-write	current	Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.45	Columnopmen99810bACLACEDestPortMax	read-write	current	Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.46	Columnopmen99810bACLACETCPFlagsFin	read-write	current	Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.47	Columnopmen99810bACLACETCPFlagsSyn	read-write	current	Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.48	Columnopmen99810bACLACETCPFlagsRst	read-write	current	Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.49	Columnopmen99810bACLACETCPFlagsPsh	read-write	current	Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.50	Columnopmen99810bACLACETCPFlagsAck	read-write	current	Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.51	Columnopmen99810bACLACETCPFlagsUrg	read-write	current	Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. …
1.3.6.1.4.1.5205.2.94.2.9.3.2.1.66	Columnopmen99810bACLACERowStatus	read-write	current	1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.5205.2.94.2.9.3.3	Scalaropmen99810bACLACEClear	read-write	current	default: 0 0 : No action 1 : Clear all ACL counters.
1.3.6.1.4.1.5205.2.94.2.9.3.4	Scalaropmen99810bACLACEMoveACEID	read-write	current	Move ACE, default: 0 ACE ID must be exist. range : 1 - 256.
1.3.6.1.4.1.5205.2.94.2.9.3.5	Scalaropmen99810bACLACEMoveNextACEID	read-write	current	Move ACE, default: 0 If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed las…
1.3.6.1.4.1.5205.2.94.2.9.3.6	Tableopmen99810bACLACEStatusTable	not-accessible	current	ACL ACE Status entry.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1	Rowopmen99810bACLACEStatusEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.1	Columnopmen99810bACLACEStatusIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.2	Columnopmen99810bACLACEStatusUser	read-only	current	Indicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.3	Columnopmen99810bACLACEStatusID	read-only	current	ACE ID. range : 1 - 256.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.4	Columnopmen99810bACLACEStatusIngressPort	read-only	current	Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.5	Columnopmen99810bACLACEStatusFrameType	read-only	current	Indicates the frame type of the ACE.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.6	Columnopmen99810bACLACEStatusAction	read-only	current	Indicates the forwarding action of the ACE.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.7	Columnopmen99810bACLACEStatusRateLimiter	read-only	current	Indicates the rate limiter number of the ACE.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.8	Columnopmen99810bACLACEStatusPortCopy	read-only	current	Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.9	Columnopmen99810bACLACEStatusMirror	read-only	current	Specify the mirror operation of this port.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.10	Columnopmen99810bACLACEStatusCPU	read-only	current	Forward packet that matched the specific ACE to CPU.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.11	Columnopmen99810bACLACEStatusCounter	read-only	current	The counter indicates the number of times the ACE was hit by a frame.
1.3.6.1.4.1.5205.2.94.2.9.3.6.1.12	Columnopmen99810bACLACEStatusConflict	read-only	current	Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.
1.3.6.1.4.1.5205.2.94.2.11	Nodeopmen99810bBroadcastStormProtection
1.3.6.1.4.1.5205.2.94.2.11.1	Tableopmen99810bBroadcastStormProtectionConfigurationTable	not-accessible	current	Show Broadcast Storm Protection configurations.
1.3.6.1.4.1.5205.2.94.2.11.1.1	Rowopmen99810bBroadcastStormProtectionConfigurationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.11.1.1.1	Columnopmen99810bBroadcastStormProtectionConfPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.11.1.1.2	Columnopmen99810bBroadcastStormProtectionConfMode	read-write	current	Configure broadcast storm protection port mode. 0: disable, 1: enable default: disable.
1.3.6.1.4.1.5205.2.94.2.11.1.1.3	Columnopmen99810bBroadcastStormProtectionConfAction	read-write	current	Configure broadcast storm protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port.
1.3.6.1.4.1.5205.2.94.2.11.1.1.4	Columnopmen99810bBroadcastStormProtectionConfPPS	read-write	current	Configure broadcast storm protection pps. default: 0.
1.3.6.1.4.1.5205.2.94.2.11.1.1.5	Columnopmen99810bBroadcastStormProtectionConfTimer	read-write	current	Configure broadcast storm protection timer(seconds) default: 300(seconds).
1.3.6.1.4.1.5205.2.94.2.11.1.1.6	Columnopmen99810bBroadcastStormProtectionConfstatus	read-only	current	Show broadcast storm protection status.
1.3.6.1.4.1.5205.2.94.2.12	Nodeopmen99810bLoopProtection
1.3.6.1.4.1.5205.2.94.2.12.1	Nodeopmen99810bLoopProtectionConfig
1.3.6.1.4.1.5205.2.94.2.12.1.1	Scalaropmen99810bLoopProtectionGlobalEnable	read-write	current	Configure loop protection mode. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.5205.2.94.2.12.1.2	Scalaropmen99810bLoopProtectionTranmisstionTime	read-write	current	Configure loop protection transmit interval. default: 5, range: 1-10.
1.3.6.1.4.1.5205.2.94.2.12.1.3	Scalaropmen99810bLoopProtectionShutdownTime	read-write	current	Configure loop protection shutdown time. default: 180, range: 0-604800.
1.3.6.1.4.1.5205.2.94.2.12.1.4	Tableopmen99810bLoopProtectionConfigurationTable	not-accessible	current	Show Loop Protection configurations.
1.3.6.1.4.1.5205.2.94.2.12.1.4.1	Rowopmen99810bLoopProtectionConfigurationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.12.1.4.1.1	Columnopmen99810bLoopProtectionConfPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.12.1.4.1.2	Columnopmen99810bLoopProtectionConfEnable	read-write	current	Configure loop protection port mode. 0: disable, 1: enable, default: enable.
1.3.6.1.4.1.5205.2.94.2.12.1.4.1.3	Columnopmen99810bLoopProtectionConfAction	read-write	current	Configure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port.
1.3.6.1.4.1.5205.2.94.2.12.1.4.1.4	Columnopmen99810bLoopProtectionConfTxmode	read-write	current	Configure loop protection port transmit mode. 0: disable, 1: enable, default: enable.
1.3.6.1.4.1.5205.2.94.2.12.2	Tableopmen99810bLoopProtectionStatusTable	not-accessible	current	Show Loop Protection Status.
1.3.6.1.4.1.5205.2.94.2.12.2.1	Rowopmen99810bLoopProtectionStatusEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.12.2.1.1	Columnopmen99810bLoopProtectionStatusPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.12.2.1.2	Columnopmen99810bLoopProtectionStatusAction	read-only	current	The currently configured port action.
1.3.6.1.4.1.5205.2.94.2.12.2.1.3	Columnopmen99810bLoopProtectionStatusTransmit	read-only	current	The currently configured port transmit mode.
1.3.6.1.4.1.5205.2.94.2.12.2.1.4	Columnopmen99810bLoopProtectionStatusLoops	read-only	current	The number of loops detected on this port.
1.3.6.1.4.1.5205.2.94.2.12.2.1.5	Columnopmen99810bLoopProtectionStatusStatus	read-only	current	The current loop protection status of the port.
1.3.6.1.4.1.5205.2.94.2.12.2.1.6	Columnopmen99810bLoopProtectionStatusLoop	read-only	current	Whether a loop is currently detected on the port.
1.3.6.1.4.1.5205.2.94.2.12.2.1.7	Columnopmen99810bLoopProtectionStatusTimeLastLoop	read-only	current	The time of the last loop event detected.
1.3.6.1.4.1.5205.2.94.2.14	Nodeopmen99810bQos
1.3.6.1.4.1.5205.2.94.2.14.1	Nodeopmen99810bQosPortClassification
1.3.6.1.4.1.5205.2.94.2.14.1.1	Tableopmen99810bQosPortClassificationTable	not-accessible	current	QoS Ingress Port Classification .
1.3.6.1.4.1.5205.2.94.2.14.1.1.1	Rowopmen99810bQosPortClassificationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.1	Columnopmen99810bQosPortClassificationPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.2	Columnopmen99810bQosPortClassificationQoSclass	read-write	current	Controls the default QoS class, i.e., the QoS class for frames not classified in any other way. There is a one to one mapping between QoS class, queue and prio…
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.3	Columnopmen99810bQosPortClassificationDPlevel	read-write	current	DP level for frames not classified in any other way. range: 0-1, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.4	Columnopmen99810bQosPortClassificationPCP	read-write	current	Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame. range: 0-7, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.5	Columnopmen99810bQosPortClassificationDEI	read-write	current	Drop Eligible Indicator. It is a 1-bit field in the VLAN. range 0-1, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.6	Columnopmen99810bQosPortClassificationTagClass	read-write	current	Configure the classification mode for tagged frames. 0: Disable, 1: Enable, default: Disable.
1.3.6.1.4.1.5205.2.94.2.14.1.1.1.7	Columnopmen99810bQosPortClassificationDSCPBased	read-write	current	Click to Enable DSCP Based QoS Ingress Port Classification. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.5205.2.94.2.14.1.2	Tableopmen99810bQoSIngressPortTagClassificationTable	not-accessible	current	Show QoS Ingress Port Tag Classification.
1.3.6.1.4.1.5205.2.94.2.14.1.2.1	Rowopmen99810bQoSIngressPortTagClassificationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.1.2.1.1	Columnopmen99810bQoSIngressPortTagClassificationPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.1.2.1.2	Columnopmen99810bQoSIngressPortTagPCP	not-accessible	current	range: 1-8, PCP0:1, PCP1:2...
1.3.6.1.4.1.5205.2.94.2.14.1.2.1.3	Columnopmen99810bQoSIngressPortTagDEI	not-accessible	current	range: 1-2, DEI0:1, DEI1:2.
1.3.6.1.4.1.5205.2.94.2.14.1.2.1.4	Columnopmen99810bQoSIngressPortTagQosClass	read-write	current	range: 0-7.
1.3.6.1.4.1.5205.2.94.2.14.1.2.1.5	Columnopmen99810bQoSIngressPortTagDPLevel	read-write	current	range: 0-1.
1.3.6.1.4.1.5205.2.94.2.14.2	Tableopmen99810bQosPortPolicingTable	not-accessible	current	configure the Policer settings for all switch ports.
1.3.6.1.4.1.5205.2.94.2.14.2.1	Rowopmen99810bQosPortPolicingEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.2.1.1	Columnopmen99810bQosPortPolicingPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.2.1.2	Columnopmen99810bQosPortPolicingMode	read-write	current	Controls whether the policer is enabled on this switch port. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.5205.2.94.2.14.2.1.3	Columnopmen99810bQosPortPolicingRate	read-write	current	Controls the rate for the policer. range: 100-10000000(kbps/fps), default: 500(kbps).
1.3.6.1.4.1.5205.2.94.2.14.2.1.4	Columnopmen99810bQosPortPolicingUnit	read-write	current	Controls the unit of measure for the policer rate. 0: kbps, 1: fps, default: kbps.
1.3.6.1.4.1.5205.2.94.2.14.2.1.5	Columnopmen99810bQosPortPolicingFlowControl	read-write	current	If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames. 0: disable, 1: enable, default: disab…
1.3.6.1.4.1.5205.2.94.2.14.3	Nodeopmen99810bQosPortScheduler
1.3.6.1.4.1.5205.2.94.2.14.3.1	Tableopmen99810bQosPortSchedulerModeTable	not-accessible	current	configure the basic QoS Port Scheduler Mode settings for all switch ports.
1.3.6.1.4.1.5205.2.94.2.14.3.1.1	Rowopmen99810bQosPortSchedulerModeEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.3.1.1.1	Columnopmen99810bQosSchedulerModePort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.3.1.1.2	Columnopmen99810bQosSchedulerMode	read-write	current	Controls whether the scheduler mode is Strict Priority or Weighted on this switch port. 0:Strict Priority 1:Weighted default: Strict Priority.
1.3.6.1.4.1.5205.2.94.2.14.3.1.1.3	Columnopmen99810bQosSchedulerShaper	read-write	current	Controls whether the port shaper is enabled 0: Disable 1: Enable. default: disable.
1.3.6.1.4.1.5205.2.94.2.14.3.1.1.4	Columnopmen99810bQosSchedulerShaperRate	read-write	current	Controls the rate for the port shaper. range: 100-1000000 default: 500 kbps.
1.3.6.1.4.1.5205.2.94.2.14.3.2	Tableopmen99810bQosPortSchedulerTable	not-accessible	current	Show Qos Port Scheduler.
1.3.6.1.4.1.5205.2.94.2.14.3.2.1	Rowopmen99810bQosPortSchedulerEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.1	Columnopmen99810bQosSchedulerPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.2	Columnopmen99810bQosSchedulerPortQueue	not-accessible	current	range: 1-8. Q0: 1, Q1: 2, ...
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.3	Columnopmen99810bQosSchedulerPortQueueShaper	read-write	current	0: disable 1:enable, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.4	Columnopmen99810bQosSchedulerPortQueueShaperRate	read-write	current	range: 100..1000000 kbps.
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.5	Columnopmen99810bQosSchedulerPortQueueShaperExcess	read-write	current	0: disable 1:enable, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.6	Columnopmen99810bQosSchedulerPortQueueSchedulerWeight	read-write	current	range: 1-100, default: 17. Only use in Q0 - Q5. Q6 & Q7 show 0
1.3.6.1.4.1.5205.2.94.2.14.3.2.1.7	Columnopmen99810bQosSchedulerPortQueueSchedulerPercent	read-only	current	Only use in Q0 - Q5. Q6 & Q7 show empty
1.3.6.1.4.1.5205.2.94.2.14.4	Nodeopmen99810bQosPortEgressTagRemarking
1.3.6.1.4.1.5205.2.94.2.14.4.1	Tableopmen99810bQosPortEgressTagRemarkingTable	not-accessible	current	configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.
1.3.6.1.4.1.5205.2.94.2.14.4.1.1	Rowopmen99810bQosPortEgressTagRemarkingEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.4.1.1.1	Columnopmen99810bQosEgressTagRemarkingPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.4.1.1.2	Columnopmen99810bQosEgressTagRemarkingMode	read-write	current	the tag remarking mode for this port. 0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS …
1.3.6.1.4.1.5205.2.94.2.14.4.2	Tableopmen99810bQosPortEgressTagRemarkingDefTable	not-accessible	current	configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.
1.3.6.1.4.1.5205.2.94.2.14.4.2.1	Rowopmen99810bQosPortEgressTagRemarkingDefEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.4.2.1.1	Columnopmen99810bQosEgressTagRemarkingDefPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.4.2.1.2	Columnopmen99810bQosEgressTagRemarkingDefPCP	read-write	current	Controls the default PCP Range : 0-7
1.3.6.1.4.1.5205.2.94.2.14.4.2.1.3	Columnopmen99810bQosEgressTagRemarkingDefDEI	read-write	current	controls the DEI Range 0-1
1.3.6.1.4.1.5205.2.94.2.14.4.4	Tableopmen99810bQosPortEgressTagRemarkingMapTable	not-accessible	current	Show Qos Port Egress Tag Remarking Map.
1.3.6.1.4.1.5205.2.94.2.14.4.4.1	Rowopmen99810bQosPortEgressTagRemarkingMapEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.4.4.1.1	Columnopmen99810bQosPortEgressTagRemarkingMapPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.4.4.1.2	Columnopmen99810bQosTagRemarkingQoSClass	not-accessible	current	range: 1-8, QoS Class0: 1, QoS Class1: 2...
1.3.6.1.4.1.5205.2.94.2.14.4.4.1.3	Columnopmen99810bQosTagRemarkingDPLevel	not-accessible	current	range: 1-2, DP Level0: 1, DP Level1: 2.
1.3.6.1.4.1.5205.2.94.2.14.4.4.1.4	Columnopmen99810bQosTagRemarkingPCP	read-write	current	range: 0-7.
1.3.6.1.4.1.5205.2.94.2.14.4.4.1.5	Columnopmen99810bQosTagRemarkingDEI	read-write	current	range: 0-1.
1.3.6.1.4.1.5205.2.94.2.14.5	Tableopmen99810bQosPortDSCPTable	not-accessible	current	configure the basic QoS Port DSCP Configuration settings for all switch ports.
1.3.6.1.4.1.5205.2.94.2.14.5.1	Rowopmen99810bQosPortDSCPEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.5.1.1	Columnopmen99810bQosPortDSCPPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.14.5.1.2	Columnopmen99810bQosPortDSCPIngressTranslate	read-write	current	Configure DSCP ingress translation mode. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.5205.2.94.2.14.5.1.3	Columnopmen99810bQosPortDSCPIngressClassify	read-write	current	Classification for a port have 4 different values. range: 0-3, 0: disable,No Ingress DSCP Classification. 1: DSCP=0,Classify if incoming (or translated if enab…
1.3.6.1.4.1.5205.2.94.2.14.5.1.4	Columnopmen99810bQosPortDSCPEgressRewrite	read-write	current	Configure the port egress rewriting mode. range: 0-2 0: Disable,No Egress rewrite. 1: Enable, Rewrite enabled without remapping. 2: Remap DP Unaware , DSCP fro…
1.3.6.1.4.1.5205.2.94.2.14.6	Tableopmen99810bQosDSCPTable	not-accessible	current	configure the basic QoS DSCP based QoS Ingress Classification settings for all switches.
1.3.6.1.4.1.5205.2.94.2.14.6.1	Rowopmen99810bQosDSCPEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.6.1.1	Columnopmen99810bQosDSCPList	not-accessible	current	DSCP mapping table index(1-64).
1.3.6.1.4.1.5205.2.94.2.14.6.1.2	Columnopmen99810bQosDSCP	read-only	current	Maximum number of supported DSCP values are 64.
1.3.6.1.4.1.5205.2.94.2.14.6.1.3	Columnopmen99810bQosDSCPTrust	read-write	current	Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames wi…
1.3.6.1.4.1.5205.2.94.2.14.6.1.4	Columnopmen99810bQosDSCPQosClass	read-write	current	QoS class. range: 0-7, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.6.1.5	Columnopmen99810bQosDSCPDPL	read-write	current	Drop Precedence Level. range: 0-1, default: disable.
1.3.6.1.4.1.5205.2.94.2.14.7	Tableopmen99810bQosDSCPTranslationTable	not-accessible	current	configure the basic QoS DSCP Translation settings for all switches.
1.3.6.1.4.1.5205.2.94.2.14.7.1	Rowopmen99810bQosDSCPTranslationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.7.1.1	Columnopmen99810bQosDSCPTranslationList	not-accessible	current	DSCP translation table index(1-64).
1.3.6.1.4.1.5205.2.94.2.14.7.1.2	Columnopmen99810bQosDSCPTranslationDSCPBasedId	read-write	current	Configure global ingress DSCP translation table.
1.3.6.1.4.1.5205.2.94.2.14.7.1.3	Columnopmen99810bQosDSCPTranslationIngressTranslate	read-write	current	DSCP at Ingress side can be translated to any of DSCP values. range: 0-63, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.7.1.4	Columnopmen99810bQosDSCPTranslationIngressClassify	read-write	current	Configure DSCP ingress classification. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.5205.2.94.2.14.7.1.5	Columnopmen99810bQosDSCPTranslationEgressRemapDP0	read-write	current	Controls the remapping for frames with DP level 0. Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.7.1.6	Columnopmen99810bQosDSCPTranslationEgressRemapDP1	read-write	current	Controls the remapping for frames with DP level 1. Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.8	Tableopmen99810bQosDSCPClassificationTable	not-accessible	current	configure the mapping of QoS class to DSCP value.
1.3.6.1.4.1.5205.2.94.2.14.8.1	Rowopmen99810bQosDSCPClassificationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.8.1.1	Columnopmen99810bQosDSCPClassificationQoSClass	not-accessible	current	Actual QoS class. Index 1~8 mean Qos Class 0~7.
1.3.6.1.4.1.5205.2.94.2.14.8.1.2	Columnopmen99810bQosDSCPClassificationDPL	not-accessible	current	DPL. Index 1~2 mean DPL 0~1.
1.3.6.1.4.1.5205.2.94.2.14.8.1.3	Columnopmen99810bQosDSCPClassificationDSCP	read-write	current	Select the classified DSCP value. range: 0-63, default: 0.
1.3.6.1.4.1.5205.2.94.2.14.9	Nodeopmen99810bQosControlList
1.3.6.1.4.1.5205.2.94.2.14.9.1	Scalaropmen99810bQosQceCreate	read-write	current	default: 0 0 : None (read only) 1 : Create an Qos entry
1.3.6.1.4.1.5205.2.94.2.14.9.2	Tableopmen99810bQosQceTable	not-accessible	current	Create Qos QCE entry.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1	Rowopmen99810bQosQceEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.1	Columnopmen99810bQosQceIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.2	Columnopmen99810bQosQceID	read-write	current	If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.3	Columnopmen99810bQosQceNextID	read-write	current	If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range …
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.4	Columnopmen99810bQosQcePortMembers	read-write	current	Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: …
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.5	Columnopmen99810bQosQceTag	read-write	current	Value of Tag field can be 'Any', 'Untag' or 'Tag'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.6	Columnopmen99810bQosQceVID	read-write	current	Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.7	Columnopmen99810bQosPCP	read-write	current	Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.8	Columnopmen99810bQosDEI	read-write	current	Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.9	Columnopmen99810bQosSMAC	read-write	current	Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.10	Columnopmen99810bQosDMACType	read-write	current	Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.11	Columnopmen99810bQosFrameType	read-write	current	Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.12	Columnopmen99810bQosMacEtherType	read-write	current	Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.13	Columnopmen99810bQosLLCSSAPAddr	read-write	current	Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.14	Columnopmen99810bQosLLCDSAPAddr	read-write	current	Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.15	Columnopmen99810bQosLLCControl	read-write	current	Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.16	Columnopmen99810bQosSNAPPID	read-write	current	Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.17	Columnopmen99810bQosIpv4Protocol	read-write	current	IP protocol number: (Other, TCP or UDP) or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.18	Columnopmen99810bQosIpv4ProtocolValue	read-write	current	Ipv4 Protocol is Other. range: 0-255 default: 0.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.19	Columnopmen99810bQosIpv4ProtocolUDPSport	read-write	current	Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.20	Columnopmen99810bQosIpv4ProtocolUDPDport	read-write	current	Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.21	Columnopmen99810bQosIpv4ProtocolTCPSport	read-write	current	Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.22	Columnopmen99810bQosIpv4ProtocolTCPDport	read-write	current	Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.23	Columnopmen99810bQosIpv4SourceIp	read-write	current	Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless…
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.24	Columnopmen99810bQosIpv4SourceMask	read-write	current	Specific Source IP address in mask format or value 0.0.0.0 is 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.25	Columnopmen99810bQosIpv4IPFragment	read-write	current	IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.26	Columnopmen99810bQosIpv4DSCP	read-write	current	Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.27	Columnopmen99810bQosIpv6Protocol	read-write	current	IP protocol number: (Other, TCP or UDP) or 'Any'.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.28	Columnopmen99810bQosIpv6ProtocolValue	read-write	current	when IPv6 protocol is Other , range: 0-255.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.29	Columnopmen99810bQosIpv6ProtocolUDPSport	read-write	current	Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.30	Columnopmen99810bQosIpv6ProtocolUDPDport	read-write	current	Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.31	Columnopmen99810bQosIpv6ProtocolTCPSport	read-write	current	Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.32	Columnopmen99810bQosIpv6ProtocolTCPDport	read-write	current	Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.33	Columnopmen99810bQosIpv6SourceIp	read-write	current	IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.34	Columnopmen99810bQosIpv6SourceMask	read-write	current	IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.35	Columnopmen99810bQosIpv6DSCP	read-write	current	Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF4…
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.36	Columnopmen99810bQosActionClass	read-write	current	QoS class: (0-7) or 8: Default.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.37	Columnopmen99810bQosActionDPL	read-write	current	DP Valid Drop Precedence Level can be (0-3) or 4: Default.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.38	Columnopmen99810bQosActionDSCP	read-write	current	Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
1.3.6.1.4.1.5205.2.94.2.14.9.2.1.39	Columnopmen99810bQosQceRowStatus	read-write	current	1: active2: notInservice 4: destroy
1.3.6.1.4.1.5205.2.94.2.14.9.3	Scalaropmen99810bQosQceMoveID	read-write	current	Move Qos, default: 0 Qos ID must be exist. range : 0 - 256.
1.3.6.1.4.1.5205.2.94.2.14.9.4	Scalaropmen99810bQosQceMoveNextID	read-write	current	Move Qos, default: 0 If the next Qos ID is non zero, the Qos will be placed before this Qos in the list. If the next Qos ID is zero,the Qos will be placed last…
1.3.6.1.4.1.5205.2.94.2.14.10	Tableopmen99810bQosQCLStatusTable	not-accessible	current	configure the basic QoS DSCP Translation settings for all switches.
1.3.6.1.4.1.5205.2.94.2.14.10.1	Rowopmen99810bQosQCLStatusEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.14.10.1.1	Columnopmen99810bQosQCLStatusList	not-accessible	current	QCL table index.
1.3.6.1.4.1.5205.2.94.2.14.10.1.2	Columnopmen99810bQosQCLStatusUser	read-only	current	Indicates the QCL user.
1.3.6.1.4.1.5205.2.94.2.14.10.1.3	Columnopmen99810bQosQCLStatusQCEId	read-only	current	Indicates the index of QCE.
1.3.6.1.4.1.5205.2.94.2.14.10.1.4	Columnopmen99810bQosQCLStatusFrameType	read-only	current	Indicates the type of frame to look for incomming frames. Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF)…
1.3.6.1.4.1.5205.2.94.2.14.10.1.5	Columnopmen99810bQosQCLStatusPortlist	read-only	current	Indicates the list of ports configured with the QCE.
1.3.6.1.4.1.5205.2.94.2.14.10.1.6	Columnopmen99810bQosQCLStatusActionClass	read-only	current	Classified QoS class; if a frame matches the QCE it will be put in the queue.
1.3.6.1.4.1.5205.2.94.2.14.10.1.7	Columnopmen99810bQosQCLStatusActionDPL	read-only	current	Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column.
1.3.6.1.4.1.5205.2.94.2.14.10.1.8	Columnopmen99810bQosQCLStatusActionDSCP	read-only	current	If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column.
1.3.6.1.4.1.5205.2.94.2.14.10.1.9	Columnopmen99810bQosQCLStatusActionConflict	read-only	current	If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column.
1.3.6.1.4.1.5205.2.94.2.14.11	Nodeopmen99810bQosStormControl
1.3.6.1.4.1.5205.2.94.2.14.11.2	Scalaropmen99810bQoSStormControlUC	read-write	current	Enable or disable the storm control status for the Unicast frame type. default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.2.14.11.3	Scalaropmen99810bQoSStormControlUCRate	read-write	current	The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
1.3.6.1.4.1.5205.2.94.2.14.11.4	Scalaropmen99810bQoSStormControlMC	read-write	current	Enable or disable the storm control status for the Multicast frame type. default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.2.14.11.5	Scalaropmen99810bQoSStormControlMCRate	read-write	current	The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
1.3.6.1.4.1.5205.2.94.2.14.11.6	Scalaropmen99810bQoSStormControlBC	read-write	current	Enable or disable the storm control status for the Broadcast frame type. default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.2.14.11.7	Scalaropmen99810bQoSStormControlBCRate	read-write	current	The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
1.3.6.1.4.1.5205.2.94.2.15	Nodeopmen99810bVlan
1.3.6.1.4.1.5205.2.94.2.15.1	Nodeopmen99810bVlanPorts
1.3.6.1.4.1.5205.2.94.2.15.1.1	Scalaropmen99810bVlanPortsTPIDforCustomSport	read-write	current	Configure the TPID used for Custom S-ports. This is a global setting for all the Custom S-ports. range: 0x0600-0xffff, default: 0x88a8.
1.3.6.1.4.1.5205.2.94.2.15.1.2	Tableopmen99810bVlanPortsTable	not-accessible	current	Configure Vlan ports Configuration mode.
1.3.6.1.4.1.5205.2.94.2.15.1.2.1	Rowopmen99810bVlanPortsEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.2.15.1.2.1.1	Columnopmen99810bVlanPortsPort	not-accessible	current	port, range : 1 - port number.
1.3.6.1.4.1.5205.2.94.2.15.1.2.1.2	Columnopmen99810bVlanPortsPVID	read-write	current	Configure PVID. range: 1-4094, default: 1.
1.3.6.1.4.1.5205.2.94.2.15.1.2.1.3	Columnopmen99810bVlanPortsFrameType	read-write	current	Configure frame type of switch ports. 0: all, 1: tagged, 2: untagged, default: all.
1.3.6.1.4.1.5205.2.94.2.15.1.2.1.4	Columnopmen99810bVlanPortsIngressFilter	read-write	current	Configure ingress filtering of switch ports. 0: disable, 1: enable, default:disable .
1.3.6.1.4.1.5205.2.94.2.15.1.2.1.5	Columnopmen99810bVlanPortsEgressRule	read-write	current	Configure egress-rule of switch ports. 0: access, 1: hybrid, 2: trunk
1.3.6.1.4.1.5205.2.94.2.15.1.2.1.6	Columnopmen99810bVlanPortsPortType	read-write	current	Configure port type of switch ports. 0: c-port, 1: s-custom-port, 2: s-port, 3: unaware. default: c-port.
1.3.6.1.4.1.5205.2.94.3	Nodeopmen99810bSecurity
1.3.6.1.4.1.5205.2.94.3.1	Nodeopmen99810bIPSourceGuard
1.3.6.1.4.1.5205.2.94.3.1.1	Nodeopmen99810bIPSourceGuardConf
1.3.6.1.4.1.5205.2.94.3.1.1.1	Scalaropmen99810bIPSourceGuardMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.1.1.2	Tableopmen99810bIPSourceGuardPortConfigTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.1.2.1	Rowopmen99810bIPSourceGuardPortConfigEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.1.2.1.1	Columnopmen99810bIPSourceGuardPortConfigPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.1.2.1.2	Columnopmen99810bIPSourceGuardPortConfigMode	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.3.1.1.2.1.3	Columnopmen99810bIPSourceGuardPortMaxDynamicClients	read-write	current	default: 99 0~2: Max Dynamic clients 99:Unlimited
1.3.6.1.4.1.5205.2.94.3.1.2	Nodeopmen99810bIPSourceGuardStatic
1.3.6.1.4.1.5205.2.94.3.1.2.1	Scalaropmen99810bIPSourceGuardStaticCreate	read-write	current	default: 0 0 : None (read only) 1 : Create a IP Source Guard
1.3.6.1.4.1.5205.2.94.3.1.2.2	Tableopmen99810bIPSourceGuardStaticTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.2.2.1	Rowopmen99810bIPSourceGuardStaticEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.2.2.1.1	Columnopmen99810bIPSourceGuardStaticIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.2.2.1.2	Columnopmen99810bIPSourceGuardStaticPort	read-write	current	Port, range: 1 - port number.
1.3.6.1.4.1.5205.2.94.3.1.2.2.1.3	Columnopmen99810bIPSourceGuardStaticVLANId	read-write	current	VLAN ID, range: 1 - 4094.
1.3.6.1.4.1.5205.2.94.3.1.2.2.1.4	Columnopmen99810bIPSourceGuardStaticIPAddress	read-write	current	IP address allowed for doing IP source guard.
1.3.6.1.4.1.5205.2.94.3.1.2.2.1.5	Columnopmen99810bIPSourceGuardStaticMACAddress	read-write	current	Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f
1.3.6.1.4.1.5205.2.94.3.1.2.2.1.6	Columnopmen99810bIPSourceGuardStaticRowStatus	read-write	current	1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.5205.2.94.3.1.3	Tableopmen99810bIPSourceGuardDynamicTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.3.1	Rowopmen99810bIPSourceGuardDynamicEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.3.1.1	Columnopmen99810bIPSourceGuardDynamicIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.1.3.1.2	Columnopmen99810bIPSourceGuardDynamicPort	read-only	current
1.3.6.1.4.1.5205.2.94.3.1.3.1.3	Columnopmen99810bIPSourceGuardDynamicVLANId	read-only	current
1.3.6.1.4.1.5205.2.94.3.1.3.1.4	Columnopmen99810bIPSourceGuardDynamicIPAddress	read-only	current
1.3.6.1.4.1.5205.2.94.3.1.3.1.5	Columnopmen99810bIPSourceGuardDynamicMACAddress	read-only	current
1.3.6.1.4.1.5205.2.94.3.2	Nodeopmen99810bARPInspection
1.3.6.1.4.1.5205.2.94.3.2.1	Nodeopmen99810bARPInspectionConf
1.3.6.1.4.1.5205.2.94.3.2.1.1	Scalaropmen99810bARPInspectionConfMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.2.1.2	Tableopmen99810bARPInspectionConfTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.1.2.1	Rowopmen99810bARPInspectionConfEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.1.2.1.1	Columnopmen99810bARPInspectionConfPortIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.1.2.1.2	Columnopmen99810bARPInspectionConfPortMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.2.2	Nodeopmen99810bARPInspectionStatic
1.3.6.1.4.1.5205.2.94.3.2.2.1	Scalaropmen99810bARPInspectionStaticCreate	read-write	current	default: 0 0: none 1: create
1.3.6.1.4.1.5205.2.94.3.2.2.2	Tableopmen99810bARPInspectionStaticTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.2.2.1	Rowopmen99810bARPInspectionStaticEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.2.2.1.1	Columnopmen99810bARPInspectionStaticIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.2.2.1.2	Columnopmen99810bARPInspectionStaticPort	read-write	current	Port, range: 1 - port number.
1.3.6.1.4.1.5205.2.94.3.2.2.2.1.3	Columnopmen99810bARPInspectionStaticVLANId	read-write	current	VLAN ID, range: 1 - 4094.
1.3.6.1.4.1.5205.2.94.3.2.2.2.1.4	Columnopmen99810bARPInspectionStaticIPAddress	read-write	current	IP address allowed for doing ARP request.
1.3.6.1.4.1.5205.2.94.3.2.2.2.1.5	Columnopmen99810bARPInspectionStaticMACAddress	read-write	current	Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f
1.3.6.1.4.1.5205.2.94.3.2.2.2.1.6	Columnopmen99810bARPInspectionStaticRowStatus	read-write	current	1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.5205.2.94.3.2.3	Tableopmen99810bARPInspectionDynamicTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.3.1	Rowopmen99810bARPInspectionDynamicEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.3.1.1	Columnopmen99810bARPInspectionDynamicIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.2.3.1.2	Columnopmen99810bARPInspectionDynamicPort	read-only	current
1.3.6.1.4.1.5205.2.94.3.2.3.1.3	Columnopmen99810bARPInspectionDynamicVLANId	read-only	current
1.3.6.1.4.1.5205.2.94.3.2.3.1.4	Columnopmen99810bARPInspectionDynamicIPAddress	read-only	current
1.3.6.1.4.1.5205.2.94.3.2.3.1.5	Columnopmen99810bARPInspectionDynamicMACAddress	read-only	current
1.3.6.1.4.1.5205.2.94.3.3	Nodeopmen99810bDHCPSnooping
1.3.6.1.4.1.5205.2.94.3.3.1	Nodeopmen99810bDHCPSnoopingConf
1.3.6.1.4.1.5205.2.94.3.3.1.1	Scalaropmen99810bDHCPSnoopingMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.3.1.2	Tableopmen99810bDHCPSnoopingPortModeConfigurationTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.3.1.2.1	Rowopmen99810bDHCPSnoopingPortModeConfigurationEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.3.1.2.1.1	Columnopmen99810bDHCPSnoopingPortModeConfigurationPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.3.1.2.1.2	Columnopmen99810bDHCPSnoopingPortModeConfigurationMode	read-write	current	default: 1 0: trust port mode 1: untrust port mode
1.3.6.1.4.1.5205.2.94.3.3.2	Tableopmen99810bDHCPSnoopingStatisticsTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.3.2.1	Rowopmen99810bDHCPSnoopingStatisticsEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.1	Columnopmen99810bDHCPSnoopingStatisticsPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.2	Columnopmen99810bDHCPSnoopingStatisticsClear	read-write	current	default: 0 0: none 1: clear
1.3.6.1.4.1.5205.2.94.3.3.2.1.3	Columnopmen99810bDHCPSnoopingRxDiscover	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.4	Columnopmen99810bDHCPSnoopingRxOffer	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.5	Columnopmen99810bDHCPSnoopingRxRequest	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.6	Columnopmen99810bDHCPSnoopingRxDecline	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.7	Columnopmen99810bDHCPSnoopingRxACK	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.8	Columnopmen99810bDHCPSnoopingRxNAK	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.9	Columnopmen99810bDHCPSnoopingRxRelease	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.10	Columnopmen99810bDHCPSnoopingRxInform	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.11	Columnopmen99810bDHCPSnoopingRxLeaseQuery	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.12	Columnopmen99810bDHCPSnoopingRxLeaseUnassigned	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.13	Columnopmen99810bDHCPSnoopingRxLeaseUnknown	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.14	Columnopmen99810bDHCPSnoopingRxLeaseActive	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.15	Columnopmen99810bDHCPSnoopingTxDiscover	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.16	Columnopmen99810bDHCPSnoopingTxOffer	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.17	Columnopmen99810bDHCPSnoopingTxRequest	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.18	Columnopmen99810bDHCPSnoopingTxDecline	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.19	Columnopmen99810bDHCPSnoopingTxACK	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.20	Columnopmen99810bDHCPSnoopingTxNAK	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.21	Columnopmen99810bDHCPSnoopingTxRelease	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.22	Columnopmen99810bDHCPSnoopingTxInform	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.23	Columnopmen99810bDHCPSnoopingTxLeaseQuery	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.24	Columnopmen99810bDHCPSnoopingTxLeaseUnassigned	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.25	Columnopmen99810bDHCPSnoopingTxLeaseUnknown	read-only	current
1.3.6.1.4.1.5205.2.94.3.3.2.1.26	Columnopmen99810bDHCPSnoopingTxLeaseActive	read-only	current
1.3.6.1.4.1.5205.2.94.3.4	Nodeopmen99810bDHCPRelay
1.3.6.1.4.1.5205.2.94.3.4.1	Nodeopmen99810bDHCPRelayConfiguration
1.3.6.1.4.1.5205.2.94.3.4.1.1	Scalaropmen99810bDHCPRelayMode	read-write	current	default: 0 0: disable 1: enable We need at least one server
1.3.6.1.4.1.5205.2.94.3.4.1.2	Scalaropmen99810bDHCPRelayServer	read-write	current
1.3.6.1.4.1.5205.2.94.3.4.1.3	Scalaropmen99810bDHCPRelayInformationMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.4.1.4	Scalaropmen99810bDHCPRelayInformationPolicy	read-write	current	default: 0 0: replace 1: keep 2: drop
1.3.6.1.4.1.5205.2.94.3.4.2	Nodeopmen99810bDHCPRelayStatistics
1.3.6.1.4.1.5205.2.94.3.4.2.1	Nodeopmen99810bDHCPRelayServerStatistics
1.3.6.1.4.1.5205.2.94.3.4.2.1.1	Scalaropmen99810bServerStatTransmitToServer	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.2	Scalaropmen99810bServerStatTransmitError	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.3	Scalaropmen99810bServerStatReceiveFromServer	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.4	Scalaropmen99810bServerStatReceiveMissingAgentOption	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.5	Scalaropmen99810bServerStatReceiveMissingCircuitID	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.6	Scalaropmen99810bServerStatReceiveMissingRemoteID	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.7	Scalaropmen99810bServerStatReceiveBadCircuitID	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.1.8	Scalaropmen99810bServerStatReceiveBadRemoteID	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2	Nodeopmen99810bDHCPRelayClientStatistics
1.3.6.1.4.1.5205.2.94.3.4.2.2.1	Scalaropmen99810bClientStatTransmitToClient	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2.2	Scalaropmen99810bClientStatTransmitError	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2.3	Scalaropmen99810bClientStatReceivefromClient	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2.4	Scalaropmen99810bClientStatReceiveAgentOption	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2.5	Scalaropmen99810bClientStatReplaceAgentOption	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2.6	Scalaropmen99810bClientStatKeepAgentOption	read-only	current
1.3.6.1.4.1.5205.2.94.3.4.2.2.7	Scalaropmen99810bClientStatDropAgentOption	read-only	current
1.3.6.1.4.1.5205.2.94.3.5	Nodeopmen99810bPortSecurity
1.3.6.1.4.1.5205.2.94.3.5.1	Nodeopmen99810bPortSecLimitCtrl
1.3.6.1.4.1.5205.2.94.3.5.1.1	Nodeopmen99810bPortSecLimitCtrlSystemConf
1.3.6.1.4.1.5205.2.94.3.5.1.1.1	Scalaropmen99810bPortSecurityMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.5.1.1.2	Scalaropmen99810bPortSecurityAging	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.5.1.1.3	Scalaropmen99810bPortSecurityAgingPeriod	read-write	current	default: 3600, range: 10-10000000
1.3.6.1.4.1.5205.2.94.3.5.1.2	Tableopmen99810bPortSecLimitCtrlTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.1.2.1	Rowopmen99810bPortSecLimitCtrlEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.1.2.1.1	Columnopmen99810bPortSecLimitCtrlPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.1.2.1.2	Columnopmen99810bPortSecLimitCtrlPortMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.5.1.2.1.3	Columnopmen99810bPortSecLimitCtrlPortLimit	read-write	current	default: 4, range: 1-1024
1.3.6.1.4.1.5205.2.94.3.5.1.2.1.4	Columnopmen99810bPortSecLimitCtrlPortAction	read-write	current	default: 0 0: none 1: trap 2: shutdown 3: trap&shutdown
1.3.6.1.4.1.5205.2.94.3.5.1.2.1.5	Columnopmen99810bPortSecLimitCtrlPortState	read-only	current
1.3.6.1.4.1.5205.2.94.3.5.1.2.1.6	Columnopmen99810bPortSecLimitCtrlPortReOpen	read-write	current	default: 0 0: none 1: reopen
1.3.6.1.4.1.5205.2.94.3.5.2	Tableopmen99810bPortSecSwitchStatusTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.2.1	Rowopmen99810bPortSecSwitchStatusEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.2.1.1	Columnopmen99810bPortSecSwitchStatusPort	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.2.1.2	Columnopmen99810bPortSecSwitchStatusUsers	read-only	current	Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN, '-' means that the corresponding user module is not enabled.
1.3.6.1.4.1.5205.2.94.3.5.2.1.3	Columnopmen99810bPortSecSwitchStatusState	read-only	current	Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.
1.3.6.1.4.1.5205.2.94.3.5.2.1.4	Columnopmen99810bPortSecSwitchStatusMACCountCurrent	read-only	current
1.3.6.1.4.1.5205.2.94.3.5.2.1.5	Columnopmen99810bPortSecSwitchStatusMACCountLimit	read-only	current
1.3.6.1.4.1.5205.2.94.3.5.3	Nodeopmen99810bPortSecPortStatus
1.3.6.1.4.1.5205.2.94.3.5.3.1	Scalaropmen99810bPortSecPortStatusPort	read-write	current	port number default: 1 range: 1 - port number.
1.3.6.1.4.1.5205.2.94.3.5.3.2	Tableopmen99810bPortSecPortStatusTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.3.2.1	Rowopmen99810bPortSecPortStatusEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.3.2.1.1	Columnopmen99810bPortSecPortStatusIndex	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.5.3.2.1.2	Columnopmen99810bPortSecPortStatusMACAddress	read-only	current
1.3.6.1.4.1.5205.2.94.3.5.3.2.1.3	Columnopmen99810bPortSecPortStatusVLANId	read-only	current
1.3.6.1.4.1.5205.2.94.3.5.3.2.1.4	Columnopmen99810bPortSecPortStatusState	read-only	current	Blocked / Forwarding
1.3.6.1.4.1.5205.2.94.3.5.3.2.1.5	Columnopmen99810bPortSecPortStatusTimeOfAddition	read-only	current
1.3.6.1.4.1.5205.2.94.3.5.3.2.1.6	Columnopmen99810bPortSecPortStatusAgeAndHold	read-only	current
1.3.6.1.4.1.5205.2.94.3.6	Nodeopmen99810bAccessManagement
1.3.6.1.4.1.5205.2.94.3.6.1	Nodeopmen99810bAccessMgtConf
1.3.6.1.4.1.5205.2.94.3.6.1.1	Scalaropmen99810bAccessMgtConfMode	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.6.1.2	Scalaropmen99810bAccessMgtConfCreate	read-write	current	default: 0 0: none 1: create
1.3.6.1.4.1.5205.2.94.3.6.1.3	Tableopmen99810bAccessMgtConfTable	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.6.1.3.1	Rowopmen99810bAccessMgtConfEntry	not-accessible	current
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.1	Columnopmen99810bAccessMgtIndex	read-write	current	Set Access Management config index range : 1-16.
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.2	Columnopmen99810bAccessMgtAddresstype	read-write	current	0: ipv4 1: ipv6
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.3	Columnopmen99810bAccessMgtStartIpAddress	read-write	current	Start IP address. IP address doesn't allowed all zero or all 'ff'H.
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.4	Columnopmen99810bAccessMgtEndIpAddress	read-write	current	End IP address. IP address doesn't allowed all zero or all 'ff'H. End ip address is not less than start ip address.
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.5	Columnopmen99810bAccessMgtHttpHttps	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.6	Columnopmen99810bAccessMgtSNMP	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.7	Columnopmen99810bAccessMgtTelnetSSH	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.6.1.3.1.8	Columnopmen99810bAccessMgtRowStatus	read-write	current	1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.5205.2.94.3.6.2	Nodeopmen99810bAccessMgtStatistics
1.3.6.1.4.1.5205.2.94.3.6.2.1	Scalaropmen99810bHttpReceivedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.2	Scalaropmen99810bHttpAllowedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.3	Scalaropmen99810bHttpDiscardedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.4	Scalaropmen99810bHttpsReceivedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.5	Scalaropmen99810bHttpsAllowedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.6	Scalaropmen99810bHttpsDiscardedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.7	Scalaropmen99810bSnmpReceivedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.8	Scalaropmen99810bSnmpAllowedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.9	Scalaropmen99810bSnmpDiscardedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.10	Scalaropmen99810bTelnetReceivedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.11	Scalaropmen99810bTelnetAllowedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.12	Scalaropmen99810bTelnetDiscardedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.13	Scalaropmen99810bSSHReceivedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.14	Scalaropmen99810bSSHAllowedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.15	Scalaropmen99810bSSHDiscardedPkts	read-only	current
1.3.6.1.4.1.5205.2.94.3.6.2.16	Scalaropmen99810bAccessMgtStatisticsClearAll	read-write	current	0: none 1: clear
1.3.6.1.4.1.5205.2.94.3.7	Nodeopmen99810bSSH
1.3.6.1.4.1.5205.2.94.3.7.1	Scalaropmen99810bSSHMode	read-write	current	default: 1 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.8	Nodeopmen99810bHTTPS
1.3.6.1.4.1.5205.2.94.3.8.1	Scalaropmen99810bHTTPSMode	read-write	current	default: 1 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.8.2	Scalaropmen99810bHTTPSAutoRedirect	read-write	current	default: 0 0: disable 1: enable
1.3.6.1.4.1.5205.2.94.3.9	Nodeopmen99810bAuthMethod
1.3.6.1.4.1.5205.2.94.3.9.1	Scalaropmen99810bConsoleAuthMethod	read-write	current	default: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.5205.2.94.3.9.2	Scalaropmen99810bConsoleFallback	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.3.9.3	Scalaropmen99810bTelnetAuthMethod	read-write	current	default: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.5205.2.94.3.9.4	Scalaropmen99810bTelnetFallback	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.3.9.5	Scalaropmen99810bSshAuthMethod	read-write	current	default: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.5205.2.94.3.9.6	Scalaropmen99810bSshFallback	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.3.9.7	Scalaropmen99810bWebAuthMethod	read-write	current	default: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.5205.2.94.3.9.8	Scalaropmen99810bWebFallback	read-write	current	default: 0 0:disable 1:enable
1.3.6.1.4.1.5205.2.94.4	Nodeopmen99810bMaintenance
1.3.6.1.4.1.5205.2.94.4.1	Scalaropmen99810bRestartDevice	read-write	current	default: 0 0:none 1:yes
1.3.6.1.4.1.5205.2.94.4.2	Nodeopmen99810bFirmware
1.3.6.1.4.1.5205.2.94.4.2.1	Scalaropmen99810bFirmwareIpAddress	read-write	current	Get/Set the firmware tftp server.
1.3.6.1.4.1.5205.2.94.4.2.2	Scalaropmen99810bFirmwareFileName	read-write	current	Get/Set the path and filename for firmware upgrading.
1.3.6.1.4.1.5205.2.94.4.2.3	Scalaropmen99810bDoFirmwareUpgrade	read-write	current	Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.
1.3.6.1.4.1.5205.2.94.4.3	Nodeopmen99810bSaveOrRestore
1.3.6.1.4.1.5205.2.94.4.3.1	Scalaropmen99810bFactoryDefaults	read-write	current	default: 0 0:none 1:yes
1.3.6.1.4.1.5205.2.94.4.3.2	Scalaropmen99810bSaveStart	read-write	current	default: 0 0:none 1:yes
1.3.6.1.4.1.5205.2.94.4.3.3	Scalaropmen99810bSaveUser	read-write	current	default: 0 0:none 1:yes
1.3.6.1.4.1.5205.2.94.4.3.4	Scalaropmen99810bRestoreUser	read-write	current	default: 0 0:none 1:yes
1.3.6.1.4.1.5205.2.94.4.4	Nodeopmen99810bExportOrImport
1.3.6.1.4.1.5205.2.94.4.4.1	Scalaropmen99810bExportIpAddress	read-write	current	Get/Set the export tftp server.
1.3.6.1.4.1.5205.2.94.4.4.2	Scalaropmen99810bExportConfigName	read-write	current	Get/Set the export file path and name.
1.3.6.1.4.1.5205.2.94.4.4.3	Scalaropmen99810bDoExportConfig	read-write	current	Do export-config. Get this OID always return zero. 1 - export.
1.3.6.1.4.1.5205.2.94.4.4.4	Scalaropmen99810bImportIpAddress	read-write	current	Get/Set the import tftp server.
1.3.6.1.4.1.5205.2.94.4.4.5	Scalaropmen99810bImportConfigName	read-write	current	Get/Set the import file path and name.
1.3.6.1.4.1.5205.2.94.4.4.6	Scalaropmen99810bDoImportConfig	read-write	current	Do export-config. Get this OID always return zero. 1 - import.
1.3.6.1.4.1.5205.2.94.4.5	Nodeopmen99810bDiagnostics
1.3.6.1.4.1.5205.2.94.4.5.1	Scalaropmen99810bPingIpAddress	read-write	current	The destination IP Address.
1.3.6.1.4.1.5205.2.94.4.5.2	Scalaropmen99810bPingSize	read-write	current	Size of ICMP echo packet. range : 60-1400, default : 64.
1.3.6.1.4.1.5205.2.94.4.5.3	Scalaropmen99810bDoPingConfig	read-write	current	Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host…
1.3.6.1.4.1.5205.2.94.4.5.4	Scalaropmen99810bPingResult	read-only	current	Show ping result.
1.3.6.1.4.1.5205.2.94.4.5.5	Scalaropmen99810bPing6IpAddress	read-write	current	The destination IPv6 Address.
1.3.6.1.4.1.5205.2.94.4.5.6	Scalaropmen99810bPing6Size	read-write	current	Size of ICMP echo packet. range : 60-1400.
1.3.6.1.4.1.5205.2.94.4.5.7	Scalaropmen99810bDoPing6Config	read-write	current	Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host…
1.3.6.1.4.1.5205.2.94.4.5.8	Scalaropmen99810bPing6Result	read-only	current	Show ping result.
1.3.6.1.4.1.5205.2.94.5	Nodeopmen99810bTrap
1.3.6.1.4.1.5205.2.94.5.1	Nodeopmen99810bTrapEvent
1.3.6.1.4.1.5205.2.94.5.1.1	Notificationopmen99810bEmergency		current	The severity level is Emergency. The system is unusable.
1.3.6.1.4.1.5205.2.94.5.1.2	Notificationopmen99810bAlert		current	The severity level is Alert. The action must be taken immediately.
1.3.6.1.4.1.5205.2.94.5.1.3	Notificationopmen99810bCritical		current	The severity level is Critical. Critical conditions.
1.3.6.1.4.1.5205.2.94.5.1.4	Notificationopmen99810bError		current	The severity level is Error. Error conditions.
1.3.6.1.4.1.5205.2.94.5.1.5	Notificationopmen99810bWarning		current	The severity level is Warning. Warning conditions.
1.3.6.1.4.1.5205.2.94.5.1.6	Notificationopmen99810bNotice		current	The severity level is Notice. Normal but significant condition.
1.3.6.1.4.1.5205.2.94.5.1.7	Notificationopmen99810bInformational		current	The severity level is Informational. Informational messages.
1.3.6.1.4.1.5205.2.94.5.1.8	Notificationopmen99810bDebug		current	The severity level is Debug. debug-level messages.
1.3.6.1.4.1.5205.2.94.5.2	Nodeopmen99810bTrapVariable
1.3.6.1.4.1.5205.2.94.5.2.1	Scalaropmen99810bInformation	read-only	current	Trap information.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

PRIVATETECH-OP-MEN99810B-MIB