PROTECTION-MIB
98 objects
This MIB describe protection mechanisms used by SDH equipment
Imported Objects
| EQUIPMENT-MIB | SagemBoolean Severity |
| SAGEM-DR-MIB | IMPORTS sagemDr |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1038.130 | Identityprotection | This MIB describe protection mechanisms used by SDH equipment | ||
| 1.3.6.1.4.1.1038.130.10 | Nodemsp | |||
| 1.3.6.1.4.1.1038.130.10.1 | ScalarmspNumber | read-only | current | Number of multiplex section protection in equipment. |
| 1.3.6.1.4.1.1038.130.10.2 | TablemspTable | not-accessible | current | List of multiplex section protection in equipment. |
| 1.3.6.1.4.1.1038.130.10.2.1 | RowmspEntry | not-accessible | current | A particular multiplex section protection of the equipment. Each entry is created in using the msTTPTable of the Sdh-Ets MIB. |
| 1.3.6.1.4.1.1038.130.10.2.1.1 | ColumnmspIndex | read-only | current | A unique value which identify a particular multiplex section protection. This index is equal to an msTTPIndex(=spiIndex) which gives the interface involved . T… |
| 1.3.6.1.4.1.1038.130.10.2.1.2 | ColumnmspWorkingPointer | read-only | current | A reference to the object which sends the data flow to this function on working synchronous port interface side. In most equipments, this value cannot be chang… |
| 1.3.6.1.4.1.1038.130.10.2.1.3 | ColumnmspProtectionPointer | read-write | current | A reference to the object which sends the data flow to this function on protection synchronous port interface side. In most equipments, this value cannot be ch… |
| 1.3.6.1.4.1.1038.130.10.2.1.4 | ColumnmspType | read-write | current | Indication of the protection type. |
| 1.3.6.1.4.1.1038.130.10.2.1.5 | ColumnmspDir | read-write | current | Indication of the direction. |
| 1.3.6.1.4.1.1038.130.10.2.1.6 | ColumnmspTraffic | read-only | current | The value of this field indicates the protection switch position. |
| 1.3.6.1.4.1.1038.130.10.2.1.7 | ColumnmspRevertive | read-write | current | If the value is true the msp function is allowed to spontaneously switch back to working chanel when it is available. If not, the msp can switch back to workin… |
| 1.3.6.1.4.1.1038.130.10.2.1.8 | ColumnmspWtr | read-write | current | The time (in seconds) the msp function waits before considering a chanel as good after a fail. |
| 1.3.6.1.4.1.1038.130.10.2.1.9 | ColumnmspSfSdPriority | read-write | current | Signal Fail and Signal Degrade can be treated according to two set of priority. The equipement will send SF and SD events according to the value of this field. |
| 1.3.6.1.4.1.1038.130.10.2.1.10 | ColumnmspSfSdHoldOffTime | read-write | current | The period (in tenth of seconds) during which a sf or a Signal Degrade is ignored by the MSP switch. |
| 1.3.6.1.4.1.1038.130.10.2.1.11 | ColumnmspCommand | read-write | current | Manual or forced commands can be apply to the protection switch. The forced and manual switch can be refused or cleared by equipment if a higher priority APS c… |
| 1.3.6.1.4.1.1038.130.10.2.1.12 | ColumnmspInitiator | read-only | current | Indicates the initiator equipment. |
| 1.3.6.1.4.1.1038.130.10.2.1.13 | ColumnmspStatus | read-only | current | Indicates the initiator equipment status : lockoutProtection(15), forcedSwitch(14), highSF(13), lowSF(12), highSD(11), lowSD(10), manualSwitch(8), waitToRestor… |
| 1.3.6.1.4.1.1038.130.10.2.1.14 | ColumnmspMonitor | read-write | current | When the value of this field is set to false, the failure detection is stopped for this multiplex section protection. |
| 1.3.6.1.4.1.1038.130.10.2.1.15 | ColumnmspFailure | read-only | current | Active failures on multiplex section protection. |
| 1.3.6.1.4.1.1038.130.10.2.1.16 | ColumnmspSeverity | read-only | current | A reference to failure severity for multiplex section protection. |
| 1.3.6.1.4.1.1038.130.10.2.1.20 | ColumnmspPam | read-write | current | Severity associed with Protection Architecture Mismatch failure for multiplex section protection. |
| 1.3.6.1.4.1.1038.130.10.2.1.21 | ColumnmspScm | read-write | current | Severity associed with Selector Control Mismatch failure for multiplex section protection. |
| 1.3.6.1.4.1.1038.130.10.2.1.22 | ColumnmspOtm | read-write | current | Severity associed with Operation Type Mismatch failure for multiplex section protection. |
| 1.3.6.1.4.1.1038.130.20 | NodemsSPRing | |||
| 1.3.6.1.4.1.1038.130.20.1 | ScalarmsSPRingNumber | read-only | current | Number of multiplex section protection in equipment. |
| 1.3.6.1.4.1.1038.130.20.6 | TablemsSPRingTable | not-accessible | current | List of multiplex section protection in equipment. |
| 1.3.6.1.4.1.1038.130.20.6.1 | RowmsSPRingEntry | not-accessible | current | A particular multiplex section protection of the equipment. Each entry is created in using the msTTPTable of the Sdh-Ets MIB. spiIndex gives the interface invo… |
| 1.3.6.1.4.1.1038.130.20.6.1.1 | ColumnmsSPRingIndex | read-only | current | A unique value which identify a particular SPRing = West STM index. |
| 1.3.6.1.4.1.1038.130.20.6.1.2 | ColumnmsSPRingWestPointer | read-only | current | A reference to the object which sends the data flow to this function on synchronous port interface side. In most equipments, this value cannot be changed and p… |
| 1.3.6.1.4.1.1038.130.20.6.1.3 | ColumnmsSPRingEastPointer | read-write | current | A reference to the object which sends the data flow to this function on synchronous port interface side. In most equipments, this value cannot be changed and p… |
| 1.3.6.1.4.1.1038.130.20.6.1.5 | ColumnmsSPRingWtr | read-write | current | The time (in seconds) the spring function waits before considering a chanel as good after a fail. |
| 1.3.6.1.4.1.1038.130.20.6.1.6 | ColumnmsSPRingSfSdHoldOffTime | read-write | current | The period (in tenth of seconds) during which a sf or a Signal Degrade is ignored by the SPRing switch. |
| 1.3.6.1.4.1.1038.130.20.6.1.7 | ColumnmsSPRingCommandSide | read-write | current | Side of the command |
| 1.3.6.1.4.1.1038.130.20.6.1.8 | ColumnmsSPRingCommand | read-write | current | Manual or forced commands can be apply to the protection switch. |
| 1.3.6.1.4.1.1038.130.20.6.1.10 | ColumnmsSPRingInitiator1 | read-only | current | A reference(ID) to the equipment that initiate the SWITCH; this is mainly the Master when the equipment is in SWITCH state; in some case like bidirectional SF … |
| 1.3.6.1.4.1.1038.130.20.6.1.11 | ColumnmsSPRingInitiator2 | read-only | current | A reference(ID) to the equipment that respond to the SWITCH; this is mainly the Slave when the equipment is in SWITCH state; in some case like bidirectional SF… |
| 1.3.6.1.4.1.1038.130.20.6.1.12 | ColumnmsSPRingMonitor | read-write | current | When the value of this field is set to false, the failure detection is stopped for this multiplex section protection. |
| 1.3.6.1.4.1.1038.130.20.6.1.13 | ColumnmsSPRingFailure | read-only | current | Active failures on multiplex section protection |
| 1.3.6.1.4.1.1038.130.20.6.1.14 | ColumnmsSPRingSeverity | read-only | current | A reference to failure severity for multiplex section protection. |
| 1.3.6.1.4.1.1038.130.20.6.1.21 | ColumnmsSPRingAto | read-write | current | Severity associed with APS Time Out failure failure for MS-SPRing. |
| 1.3.6.1.4.1.1038.130.20.6.1.22 | ColumnmsSPRingArv | read-write | current | Severity associed with APS Rules Violation failure failure for MS-SPRing. |
| 1.3.6.1.4.1.1038.130.20.6.1.23 | ColumnmsSPRingAun | read-write | current | Severity associed with APS Unknown Node failure failure for MS-SPRing. |
| 1.3.6.1.4.1.1038.130.20.6.1.24 | ColumnmsSPRingPtm | read-write | current | Severity associed with Potential Traffic Misconnection failure for MS-SPRing. |
| 1.3.6.1.4.1.1038.130.20.6.1.25 | ColumnmsSPRingMms | read-write | current | Severity associed with Mutiple Multiplex Section Fail failure for MS-SPRing. |
| 1.3.6.1.4.1.1038.130.20.6.1.26 | ColumnmsSPRingExr | read-write | current | Severity associed with EXeRcise failure for MS-SPRing. |
| 1.3.6.1.4.1.1038.130.20.6.1.27 | ColumnmsSPRingSimpleFailure | read-write | current | Indicate if simple or multi ring failure must be considerated |
| 1.3.6.1.4.1.1038.130.20.6.1.28 | ColumnmsSPRingId | read-write | current | Ring Identifier of the equipement |
| 1.3.6.1.4.1.1038.130.20.6.1.29 | ColumnmsSPRingNodeState | read-only | current | |
| 1.3.6.1.4.1.1038.130.20.6.1.30 | ColumnmsSPRingSwitchingSide | read-only | current | Switching SideSide |
| 1.3.6.1.4.1.1038.130.20.6.1.31 | ColumnmsSPRingWestTraffic | read-only | current | The value of this field indicates the protection switch position. |
| 1.3.6.1.4.1.1038.130.20.6.1.32 | ColumnmsSPRingEastTraffic | read-only | current | The value of this field indicates the protection switch position. |
| 1.3.6.1.4.1.1038.130.20.6.1.33 | ColumnmsSPRingWestStatus | read-only | current | Indicates the local status: OFF (19), lockoutProtection (16), forcedSwitch-R(13),sf-R(11),sd-R(8), manualSwitch-R(6), waitToRestore(5),exer-R(3),noRequest(0) |
| 1.3.6.1.4.1.1038.130.20.6.1.34 | ColumnmsSPRingEastStatus | read-only | current | Indicates the local status: OFF (19), lockoutProtection (16), forcedSwitch-R(13),sf-R(11),sd-R(8), manualSwitch-R(6), waitToRestore(5),exer-R(3),noRequest(0) |
| 1.3.6.1.4.1.1038.130.20.11 | TablemsSPRingTopoMapTable | not-accessible | current | Topology Map of the ring = West STM index + Val (1<=Val<=16). |
| 1.3.6.1.4.1.1038.130.20.11.1 | RowmsSPRingTopoMapEntry | not-accessible | current | A particular entry of the ring topology map. |
| 1.3.6.1.4.1.1038.130.20.11.1.1 | ColumnmsSPRingTopoMapIndex | read-only | current | index |
| 1.3.6.1.4.1.1038.130.20.11.1.2 | ColumnmsSPRingTopoMapID | read-write | current | identifier of the node |
| 1.3.6.1.4.1.1038.130.20.21 | TablemsSPRingMisconMapTable | not-accessible | current | Connectivity (misconnection) Map of the ring. |
| 1.3.6.1.4.1.1038.130.20.21.1 | RowmsSPRingMisconMapEntry | not-accessible | current | A particular entry of the ring connectivity (misconnection) map. All entries are created after setting the msSPRingWestPointer. |
| 1.3.6.1.4.1.1038.130.20.21.1.1 | ColumnmsSPRingMisconMapIndex | read-only | current | Index = West STM index + Val (1<=Val<=16) ADR2500c : val = 1 to 8 for West and 9 to 16 for East |
| 1.3.6.1.4.1.1038.130.20.21.1.2 | ColumnmsSPRingMisconMapSide | read-only | current | Side (WestPointer/msSPRingEast) of the interface that supports the AU4 |
| 1.3.6.1.4.1.1038.130.20.21.1.3 | ColumnmsSPRingMisconMapIn | read-write | current | Node of the ring where the Au4 traffic enters the ring |
| 1.3.6.1.4.1.1038.130.20.21.1.4 | ColumnmsSPRingMisconMapOut | read-write | current | Node of the ring where the Au4 traffic exits the ring |
| 1.3.6.1.4.1.1038.130.20.21.1.5 | ColumnmsSPRingMisconMapTimeSlot | read-write | current | Time Slot assignment for the AU4 |
| 1.3.6.1.4.1.1038.130.20.21.1.6 | ColumnmsSPRingMisconMapType | read-write | current | If the value is equal to terminated, the traffic in the ring is inserted or extracted at this node. If the value is equal to passedThrough the traffic only cro… |
| 1.3.6.1.4.1.1038.130.20.21.1.7 | ColumnmsSPRingMisconMapLOAccess | read-write | current | True if the AU4 is accessed at LO layers somewhere in the ring |
| 1.3.6.1.4.1.1038.130.20.31 | TablemsSPRingNUTTable | not-accessible | current | Topology Map of the ring. |
| 1.3.6.1.4.1.1038.130.20.31.1 | RowmsSPRingNUTEntry | not-accessible | current | A particular entry of the ring topology map. |
| 1.3.6.1.4.1.1038.130.20.31.1.1 | ColumnmsSPRingNUTIndex | read-only | current | AU4 index = West STM index + Val (Val = working timeSlot; 1<=Val<=8) |
| 1.3.6.1.4.1.1038.130.20.31.1.2 | ColumnmsSPRingNUTisNut | read-write | current | Define if the traffic is used for NUT Traffic |
| 1.3.6.1.4.1.1038.130.30 | Nodesncp | |||
| 1.3.6.1.4.1.1038.130.30.1 | ScalarsncNumber | read-only | current | Number of snc in equipment. |
| 1.3.6.1.4.1.1038.130.30.2 | TablesncTable | not-accessible | current | List of snc protection in equipment. |
| 1.3.6.1.4.1.1038.130.30.2.1 | RowsncEntry | not-accessible | current | A particular SNC protection which is created in using the linkTable of the Xconnection MIB. |
| 1.3.6.1.4.1.1038.130.30.2.1.1 | ColumnsncIndex | read-only | current | sncIndex = 1000*sncType + sncTTPSink = linkIndex |
| 1.3.6.1.4.1.1038.130.30.2.1.2 | ColumnsncCTPSink | read-only | current | The value of this field is the index of the Output Connection to which an snc function is applied. |
| 1.3.6.1.4.1.1038.130.30.2.1.3 | ColumnsncLinkType | read-only | current | Trail level of the connection |
| 1.3.6.1.4.1.1038.130.30.2.1.4 | ColumnsncCTPSourceW | read-only | current | The value of this field indicates the Working Input Connection Point which composes the protection link of the Output Connection Point (sncIndex). |
| 1.3.6.1.4.1.1038.130.30.2.1.5 | ColumnsncCTPSourceP | read-write | current | The value of this field indicates the Protected Input Connection Point which composes the protection link of the Output Connection Point (sncIndex). When this … |
| 1.3.6.1.4.1.1038.130.30.2.1.6 | ColumnsncTrafficStatus | read-only | current | This field indicates the Protection unit switch position. |
| 1.3.6.1.4.1.1038.130.30.2.1.8 | ColumnsncWorkingTriggerType | read-write | current | The value of this field is the criterion to trigger a switch for the Working Input Connection Point.SNC/I uses SF criterion for switching: TU-AIS/TU-LOP for VC… |
| 1.3.6.1.4.1.1038.130.30.2.1.9 | ColumnsncProtectionTriggerType | read-write | current | The value of this field is the criterion to trigger a switch for the Protection Input Connection Point. SNC/I uses SF criterion for switching: TU-AIS/TU-LOP fo… |
| 1.3.6.1.4.1.1038.130.30.2.1.20 | ColumnsncRevertive | read-write | current | If the value is true the Protection unit function is allowed to spontaneously switch back to working chanel when it is available. If not, the snc can switch ba… |
| 1.3.6.1.4.1.1038.130.30.2.1.21 | ColumnsncWtr | read-write | current | The time (in seconds) the Protection unit function waits before considering a chanel as good after a fail. |
| 1.3.6.1.4.1.1038.130.30.2.1.22 | ColumnsncStateProcess | read-only | current | The value of this field indicates the state of the snc protection process. |
| 1.3.6.1.4.1.1038.130.30.2.1.23 | ColumnsncHoldOffTime | read-write | current | The time in tenth of seconds during which a protection trigger criterion is ignored. |
| 1.3.6.1.4.1.1038.130.30.2.1.24 | ColumnsncCommand | read-write | current | Manual or forced commands can be apply to the protection unit. The forced and manual switch can be refused or cleared by equipment if a higher priority eveneme… |
| 1.3.6.1.4.1.1038.130.40 | Nodecardp | |||
| 1.3.6.1.4.1.1038.130.40.1 | ScalarcardpNumber | read-only | current | Number of card protections in equipment. |
| 1.3.6.1.4.1.1038.130.40.2 | TablecardpTable | not-accessible | current | List of card protections in equipment. |
| 1.3.6.1.4.1.1038.130.40.2.1 | RowcardpEntry | not-accessible | current | A particular card protection which is created in using the boardTable of the Shelf MIB. |
| 1.3.6.1.4.1.1038.130.40.2.1.1 | ColumncardpIndex | read-only | current | cardpIndex = boardIndex in the Shelf Mib. This index points to the working board. |
| 1.3.6.1.4.1.1038.130.40.2.1.2 | ColumncardpBoardFamily | read-only | current | This field indicates the family of board concerned by the protection. |
| 1.3.6.1.4.1.1038.130.40.2.1.3 | ColumncardpReliefIndex | read-write | current | A reference to the relief card. It must be an existing index in the boardTable of Shelf Mib. The relief card and the protected Card must below to the same fami… |
| 1.3.6.1.4.1.1038.130.40.2.1.4 | ColumncardpTrafficStatus | read-only | current | Indication of the protection switch position. |
| 1.3.6.1.4.1.1038.130.40.2.1.5 | ColumncardpCommand | read-write | current | Manual commands can be apply to the protection unit. The manual switch can be refused or cleared by equipment if a higher priority evenement is received or if … |
| 1.3.6.1.4.1.1038.130.40.2.1.6 | ColumncardpStatus | read-only | current | Indication of the current protection status |