PRVT-ISIS-MIB
251 objects
The MIB module for management of the IS-IS protocol.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddressPrefixLength |
| PRVT-SWITCH-MIB | routingProtocols |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.6.4.4 | IdentityprvtIsisMIB | The MIB module for management of the IS-IS protocol. | ||
| 1.3.6.1.4.1.738.1.6.4.4.1 | NodeprvtIsisMIBObjects | |||
| 1.3.6.1.4.1.738.1.6.4.4.1.1 | NodeprvtIsisSystem | |||
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1 | TableprvtIsisSysTable | not-accessible | current | The set of instances of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1 | RowprvtIsisSysEntry | not-accessible | current | Each row defines information specific to a single instance of the IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.1 | ColumnprvtIsisSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.2 | ColumnprvtIsisSysExistState | read-create | current | The existence state (RowStatus) of the IS-IS router. Setting this to state 'destroy' forces the router to forget all the current configuration. Setting the sta… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.3 | ColumnprvtIsisSysVersion | read-only | current | The version number of the IS-IS protocol that is implemented. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.4 | ColumnprvtIsisSysType | read-create | current | At which levels is the Intermediate System running? This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.5 | ColumnprvtIsisSysID | read-create | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the area addresses to form the Network Entity Titles. This value i… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.6 | ColumnprvtIsisSysMaxPathSplits | read-create | current | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.7 | ColumnprvtIsisSysMaxLSPGenInt | read-create | current | Maximum interval, in seconds, between generated LSPs by this instance of the protocol. This object follows the ResettingTimer behavior. The value must be great… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.8 | ColumnprvtIsisSysPollESHelloRate | read-create | current | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.9 | ColumnprvtIsisSysWaitTime | read-create | current | Number of seconds to delay in state 'waiting' before entering the state 'on'. This object follows the ResettingTimer behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.10 | ColumnprvtIsisSysShutdown | read-create | current | The administrative state of this instance of the Integrated IS-IS protocol. Setting this object to the value 'false' when its current value is 'true' enables o… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.11 | ColumnprvtIsisSysL2toL1Leaking | read-create | current | If true, allow the router to leak L2 routes into L1. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.12 | ColumnprvtIsisSysMaxAge | read-create | current | Value to place in RemainingLifeTime field of the LSPs we generate. This should be at least 300 seconds greater than prvtIsisSysMaxLSPGenInt. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.13 | ColumnprvtIsisSysReceiveLSPBufferSize | read-create | current | Size of the largest buffer we are designed or configured to store. This should be at least as big as the maximum prvtIsisSysLevelxOrigLSPBuffSize supported by … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.14 | ColumnprvtIsisSysOperStatus | read-only | current | The current operational status of this instance of the Protocol Manager component of IS-IS. Note that IS-IS can only activate if there is at least one active e… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.15 | ColumnprvtIsisSysAllowAutoI3Config | read-create | current | If 'true' then add IP addresses received from the I3 stub to the prvtIsisCircIPAddrTable with admin state 'on'. If 'false' then add them with admin state 'off'… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.16 | ColumnprvtIsisSysCalcMaxDelay | read-create | current | The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.17 | ColumnprvtIsisSysCalcThrshUpdStart | read-create | current | This parameter can be used to override the routing calculation delay indicated by the prvtIsisSysCalcMaxDelay parameter when the number of updates to the Link … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.18 | ColumnprvtIsisSysCalcThrshUpdRestart | read-create | current | This parameter can be used to interrupt a full routing calculation when the number of pending updates to the Link State Database has reached a threshold value.… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.19 | ColumnprvtIsisSysCalcThrshRestartLimit | read-create | current | This parameter limits the number of consecutive times a routing calculation can be interrupted by new updates. This guarantees that the routing calculation wil… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.20 | ColumnprvtIsisSysCalcPauseFreq | read-create | current | This value determines how regularly a Routing Calculation is paused. It is measured in points. The points scale roughly maps to a time scale, so that the large… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.21 | ColumnprvtIsisSysCheckChecksums | read-create | current | This value determines how often the checksums of LSPs in the Link State Database are checked. If 0, no checksums in the database are checked. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.22 | ColumnprvtIsisSysZeroAgeLifetime | read-create | current | This is the minimum amount of time in seconds for which the header of an expired LSP shall be retained after it has been flooded with zero Remaining Lifetime. … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.23 | ColumnprvtIsisSysNumUpdPending | read-only | current | The number of updates that are pending addition to the Link State Database. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.24 | ColumnprvtIsisSysNumUpdMerged | read-only | current | The number of updates that have been merged into the Link State Database since the last routing calculation. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.25 | ColumnprvtIsisSysNumCksumsPending | read-only | current | The number of LSPs in the Link State Database which are now due to have their checksum checked. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.26 | ColumnprvtIsisSysTEMetricPcntge | read-create | current | The Traffic Engineering metric is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this parameter determines t… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.27 | ColumnprvtIsisSysMaxBwidthPcntge | read-create | current | The maximum bandwidth on an interface is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this parameter deter… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.28 | ColumnprvtIsisSysMaxResBwidthPcntge | read-create | current | The maximum reservable bandwidth on an interface is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this para… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.29 | ColumnprvtIsisSysUnresBwidthPcntge | read-create | current | The unreserved bandwidth on an interface is updated in real-time by the I3 Stub. In order to increase performance and reduce network traffic, this parameter de… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.30 | ColumnprvtIsisSysMaxLSPBwidthPcntge | read-create | current | The maximum LSP bandwidth for the various switching descriptors on an interface is updated in real-time by the I3 Stub. In order to increase performance and re… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.31 | ColumnprvtIsisSysMinLSPBwidthPcntge | read-create | current | The minimum LSP bandwidth for the various switching descriptors on an interface is updated in real-time by the I3 Stub. In order to increase performance and re… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.32 | ColumnprvtIsisSysMTUSizePcntge | read-create | current | The Maximum Transmission Unit size for the various switching descriptors on an interface is updated in real-time by the I3 Stub. In order to increase performan… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.33 | ColumnprvtIsisSysTERouterID | read-create | current | The Local IPv4 TE Router ID. This is a single stable IPv4 address that can always be referenced in a path that will be reachable from multiple hops away, regar… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.34 | ColumnprvtIsisSysIPv6TERouterID | read-create | current | The Local IPv6 TE Router ID. This is a single stable IPv6 global address that can always be referenced in a path that will be reachable from multiple hops away… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.35 | ColumnprvtIsisSysMaxExternalRoutes | read-create | current | The maximum number of static routes and routes redistributed from other protocols that will be accepted. The action that will be taken when the maximum is exce… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.36 | ColumnprvtIsisSysMaxExternalRoutesAct | read-create | current | The action that will be take whenn the number of external routes exceeds prvtIsisSysMaxExternalRoutes. If set to 'log', IS-IS will alert the administrator by l… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.37 | ColumnprvtIsisSysLspFullSuppress | read-create | current | The set of routes (if any) that will be removed from the local LSP when the local LSP becomes full at either level. When set to 'external', all static routes a… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.38 | ColumnprvtIsisSysLspFullSetDBOL | read-create | current | If set to 'true', the database overload flag will be set in the local LSP (at all active levels) when the local LSP becomes full (at either level). The adminis… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.39 | ColumnprvtIsisSysRestartHelpPeer | read-create | current | Indicates if the procedures defined in the IS-IS restart RFC (3847) for helping a peer to restart is implemented. Note that this object has no effect on the lo… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.40 | ColumnprvtIsisSysRestartActivationType | read-create | current | This object is only used when IS-IS is manually activated or deactivated (in other words, enters or leaves the state with row status 'active' and admin status … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.41 | ColumnprvtIsisSysRestartAutoResetType | read-create | current | There are cases where the IS-IS protocol requires the local node to automatically deactivate and later reactivate. This object indicates which restart procedur… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.42 | ColumnprvtIsisSysRestartAdjacencyWait | read-create | current | This object is only used when IS-IS activates with the activation type (prvtIsisSysRestartActivationType or prvtIsisSysRestartAutoResetType) set to 'start' or … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.43 | ColumnprvtIsisSysMaxRecoveryTime | read-create | current | This object is only used when IS-IS activates with the activation type (prvtIsisSysRestartActivationType or prvtIsisSysRestartAutoResetType) set to 'restart'. … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.44 | ColumnprvtIsisSysClearStats | read-create | current | Set to 'true' to clear all system statistics, including the prvtIsisSystemCounter and prvtIsisPacketCounter tables. Note that prvtIsisSysStatsLSPCount is not r… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.45 | ColumnprvtIsisSysSetAttached | read-create | current | If IS-IS is operating at both level 1 and level 2, this field indicates how IS-IS should decide whether to set the attached bit in its level 1 LSP. - 'attachNo… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.46 | ColumnprvtIsisSysProtSupported | read-create | current | This attribute contains the set of protocols supported by this Intermediate System. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.47 | ColumnprvtIsisSysRstrctLanAdjsToSubnet | read-create | current | This object only affects IPv4 broadcast circuits. If this is set to 'true', IS-IS will only form adjacencies with intermediate systems that are on the same sub… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.48 | ColumnprvtIsisSysHostName | read-create | current | The string that this instance of IS-IS will use as the local hostname. This is advertised to other Intermediate Systems in the Dynamic Hostname TLV. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.49 | ColumnprvtIsisSysCalcSoonAfterCircChng | read-create | current | Set this object to 'true' to minimize the delay before triggering a routing calculation that includes any relevant circuit change. This means a change to the l… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.50 | ColumnprvtIsisSysSendNotifications | read-create | current | This attribute contains the set of notifications generated by this Intermediate System. The notifications that may be enabled are the prvtIsisCircIndTable, prv… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.60 | ColumnprvtIsisSysLvl1OrigLSPBuffSize | read-create | current | The maximum size of LSPs and SNPs originated by this Intermediate System at level 1. This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.61 | ColumnprvtIsisSysLvl1MinLSPGenInt | read-create | current | Minimum interval, in seconds, between successive generation of LSPs with the same LSPID at level 1 by this instance of the protocol. This object follows the Re… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.62 | ColumnprvtIsisSysLvl1OverloadState | read-only | current | The Overload state of the database at level 1. The value 'overloaded' indicates a database that is low on an essential resource, such as memory. The administra… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.63 | ColumnprvtIsisSysLvl1SetOverload | read-create | current | Administratively set the overload bit for the level. The overload bit will continue to be set if the implementation runs out of memory, independent of this var… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.64 | ColumnprvtIsisSysLvl1SetOverloadUntil | read-create | current | If set, the overload bit should be set, and cleared after sysUpTime exceeds this value. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.65 | ColumnprvtIsisSysLvl1MetricStyle | read-create | current | Which style of Metric do we generate in our LSPs at level 1 ? |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.66 | ColumnprvtIsisSysLvl1SPFConsiders | read-create | current | Which style of Metric do we consider in our SPF computation at level 1 ? |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.67 | ColumnprvtIsisSysLvl1TEEnabled | read-create | current | Do we do Traffic Engineering for IPv4 at level 1 ? Currently only Traffic Engineering at L1 is supported. If Traffic Engineering is enabled, prvtIsisSysLvl1Met… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.68 | ColumnprvtIsisSysLvl1IPv6TEEnabled | read-create | current | Do we do Traffic Engineering for IPv6 at level 1 ? Currently only Traffic Engineering at L1 is supported. If Traffic Engineering is enabled, a value must be co… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.69 | ColumnprvtIsisSysLvl1RestartT2Duration | read-create | current | This object is only used when IS-IS activates with the activation type (prvtIsisSysRestartActivationType or prvtIsisSysRestartAutoResetType) set to 'start' or … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.70 | ColumnprvtIsisSysLvl1AuthUser | read-create | current | Authentication user data for area/domain level authentication. This data is passed opaquely to the authentication interface where it can be used to assist with… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.80 | ColumnprvtIsisSysLvl2OrigLSPBuffSize | read-create | current | The maximum size of LSPs and SNPs originated by this Intermediate System at level 2. This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.81 | ColumnprvtIsisSysLvl2MinLSPGenInt | read-create | current | Minimum interval, in seconds, between successive generation of LSPs with the same LSPID at level 2 by this instance of the protocol. This object follows the Re… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.82 | ColumnprvtIsisSysLvl2OverloadState | read-only | current | The Overload state of the database at level 2. The value 'overloaded' indicates a database that is low on an essential resource, such as memory. The administra… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.83 | ColumnprvtIsisSysLvl2SetOverload | read-create | current | Administratively set the overload bit for the level. The overload bit will continue to be set if the implementation runs out of memory, independent of this var… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.84 | ColumnprvtIsisSysLvl2SetOverloadUntil | read-create | current | If set, the overload bit should be set, and cleared after sysUpTime exceeds this value. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.85 | ColumnprvtIsisSysLvl2MetricStyle | read-create | current | Which style of Metric do we generate in our LSPs at level 2 ? |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.86 | ColumnprvtIsisSysLvl2SPFConsiders | read-create | current | Which style of Metric do we consider in our SPF computation at level 2 ? |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.87 | ColumnprvtIsisSysLvl2TEEnabled | read-create | current | Do we do Traffic Engineering for IPv4 at level 2 ? Currently only Traffic Engineering at L1 is supported. If Traffic Engineering is enabled, prvtIsisSysLvl2Met… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.88 | ColumnprvtIsisSysLvl2IPv6TEEnabled | read-create | current | Do we do Traffic Engineering for IPv6 at level 2 ? Currently only Traffic Engineering at L1 is supported. If Traffic Engineering is enabled, a value must be co… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.89 | ColumnprvtIsisSysLvl2RestartT2Duration | read-create | current | This object is only used when IS-IS activates with the activation type (prvtIsisSysRestartActivationType or prvtIsisSysRestartAutoResetType) set to 'start' or … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.1.1.90 | ColumnprvtIsisSysLvl2AuthUser | read-create | current | Authentication user data for area/domain level authentication. This data is passed opaquely to the authentication interface where it can be used to assist with… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.2 | TableprvtIsisManAreaAddrTable | not-accessible | current | The set of manual area addresses configured on this Intermediate System. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.2.1 | RowprvtIsisManAreaAddrEntry | not-accessible | current | Each entry contains one area address manually configured on this system |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.2.1.1 | ColumnprvtIsisManAreaAddr | not-accessible | current | A manually configured area address for this system. This object follows the index behavior. The area address must have a non-zero length. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.2.1.2 | ColumnprvtIsisManAreaAddrExistState | read-create | current | The existence state (RowStatus) of the prvtIsisManAreaAddrEntry |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.3 | TableprvtIsisAreaAddrTable | not-accessible | current | The union of the sets of area addresses reported in all Level 1 LSPs with segment number zero received by this instance of the protocol from Intermediate Syste… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.3.1 | RowprvtIsisAreaAddrEntry | not-accessible | current | Each entry contains one area address reported in a Level 1 LSP received by this instance of the IS-IS protocol. Received area addresses with a length of zero a… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.3.1.1 | ColumnprvtIsisAreaAddr | not-accessible | current | An area address reported in a Level 1 LSP received by this instance of the IS-IS protocol. Received area addresses with a length of zero are ignored. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.3.1.2 | ColumnprvtIsisAreaAddrInLSP | read-only | current | Following ISO10589 section 7.1.5, we advertise the three numerically lowest level 1 area addresses in the level 2 LSP fragment zero. If 'true', then this area … |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.5 | TableprvtIsisSummAddrTable | not-accessible | current | The set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System. An administrator may use a summary address to combine an… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.5.1 | RowprvtIsisSummAddrEntry | not-accessible | current | Each entry contains one IP summary address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.5.1.2 | ColumnprvtIsisSummAddress | not-accessible | current | The IP address and prefix length value for this summary address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.5.1.4 | ColumnprvtIsisSummAddrExistState | read-create | current | The existence state (RowStatus) of this summary address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.5.1.5 | ColumnprvtIsisSummAddrMetric | read-create | current | The metric value to announce this summary address within LSPs generated by this system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.5.1.6 | ColumnprvtIsisSummAddrFullMetric | read-create | current | The wide metric value to announce this summary address within LSPs generated by this system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.10 | TableprvtIsisRedistributeTable | not-accessible | current | The table represents the routing protocols redistributed into the IS-IS routing domain. Creation of conceptual row in the table starts the redistribution of th… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.10.1 | RowprvtIsisRedistributeEntry | not-accessible | current | An entry into the prvtIsisRedistributeTable. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.10.1.1 | ColumnprvtIsisRedistributeProtocol | not-accessible | current | The specific routes redistributed into IS-IS. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.10.1.2 | ColumnprvtIsisRedistributeRowStatus | read-create | current | Indicates the status of the row. Setting of this field to active enables the redistribution of the protocol. Setting this field to destroy disables the redistr… |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.10.1.3 | ColumnprvtIsisRedistributeLevel | read-create | current | The IS-IS level at which this row applies to. |
| 1.3.6.1.4.1.738.1.6.4.4.1.1.10.1.4 | ColumnprvtIsisRedistributeMetric | read-create | current | The IS-IS protocol metric to assign to the redistributed route. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3 | NodeprvtIsisCirc | |||
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2 | TableprvtIsisCircTable | not-accessible | current | The table of circuits used by each instance of Integrated IS-IS on this system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1 | RowprvtIsisCircEntry | not-accessible | current | An prvtIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.2 | ColumnprvtIsisCircIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation. This is also used as the 3-way circuit… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.3 | ColumnprvtIsisCircExistState | read-create | current | The existence state (RowStatus) of this circuit. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol PDUs on this circuit… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.4 | ColumnprvtIsisCircIfSubIndex | read-create | current | A specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creation. … |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.5 | ColumnprvtIsisCircShutdown | read-create | current | The administrative state of the circuit. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.6 | ColumnprvtIsisCircType | read-create | current | The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface define… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.7 | ColumnprvtIsisCircExtDomain | read-create | current | If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.8 | ColumnprvtIsisCircLevel | read-create | current | Indicates which type of packets will be sent and accepted on this circuit. The values used will be modified by the settings of prvtIsisSysType. This object fol… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.9 | ColumnprvtIsisCircPassiveCircuit | read-create | current | Should we include this interface in LSPs, even if it is not running the IS-IS Protocol? Circuits with prvtIsisCircExtDomain 'true' will only be included in LSP… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.10 | ColumnprvtIsisCircMeshGroupEnabled | read-create | current | Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh gro… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.11 | ColumnprvtIsisCircMeshGroup | read-create | current | Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the sa… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.12 | ColumnprvtIsisCircSmallHellos | read-create | current | Can we send unpadded hellos on LAN circuits? False means LAN Hellos must be padded. Currently only unpadded hellos are supported. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.13 | ColumnprvtIsisCircLastUpTime | read-only | current | If the circuit is enabled, the value of sysUpTime when prvtIsisCircShutdown most recently entered the state on. If the circuit is not on, the value of sysUpTim… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.14 | ColumnprvtIsisCirc3WayEnabled | read-only | current | Is this circuit enabled to run 3Way handshake? Currently the 3-way handshake on point to point circuits is always run. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.15 | ColumnprvtIsisCircExtendedCircID | read-only | current | The value to be used as the extended circuit ID in 3Way handshake. This value is only used if prvtIsisCirc3WayEnabled is true, and must be unique across all ci… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.16 | ColumnprvtIsisCircOperState | read-only | current | The operational state of this circuit. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.17 | ColumnprvtIsisCircSdEntityIndex | read-create | current | Identifies the SDC entity which will handle this circuit. This object must be specified before the circuit can run the IS-IS protocol. It cannot be changed aft… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.18 | ColumnprvtIsisCircDlBuffPoolSize | read-create | current | Capacity of the buffer pool used by the DL stub to send data signals to the SDC. This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.19 | ColumnprvtIsisCircSdPDUBuffPoolSize | read-create | current | Capacity of the buffer pool into which SDC transfers data signals from the DL Stub. This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.20 | ColumnprvtIsisCircSdIndBuffPoolSize | read-create | current | Capacity of the buffer pool used by SDC to send indications to PM. This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.21 | ColumnprvtIsisCircDataLinkBlockSize | read-create | current | Maximum size of PDU that can be sent or received over this circuit (MTU). This object follows the ReplaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.22 | ColumnprvtIsisCircPhysicalAddress | read-create | current | The physical address of the network interface (for example a MAC address on an Ethernet card). This value is only relevant to a broadcast circuit and is ignore… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.23 | ColumnprvtIsisCircManualOrAutomatic | read-only | current | Has this circuit been configured by MIB (manual), I3 information (automatic) or both? MIB configuration overrides I3 configuration. Automatic circuits cannot b… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.24 | ColumnprvtIsisCircT1TimerRunning | read-only | current | Is the T1 timer running on this circuit? This object is only valid on a circuit that is currently running the IS-IS protocol (prvtIsisCircExtDomain is 'false' … |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.25 | ColumnprvtIsisCircProtSupported | read-create | current | Which protocols are supported on this circuit? Note that the configured value is used in conjunction with the value of prvtIsisSysProtSupported. In particular:… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.26 | ColumnprvtIsisCircPtToPtOverLAN | read-create | current | Allows a broadcast circuit to be configured to operate point-to-point over LAN procedures. This is used in conjunction with the prvtIsisCircType object as foll… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.30 | ColumnprvtIsisCircLvl1Metric | read-create | current | The metric value of this circuit for level 1. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.31 | ColumnprvtIsisCircLvl1WideMetric | read-create | current | The wide metric value of this circuit for level 1. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.32 | ColumnprvtIsisCircLvl1ISPriority | read-create | current | The priority for becoming the LAN-Designated Intermediate System at level 1. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.33 | ColumnprvtIsisCircLvl1IDOctet | read-only | current | A one byte identifier for the circuit selected by the Intermediate System. On point-to-point circuits, the value is used as the Local Circuit ID in point-to-po… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.34 | ColumnprvtIsisCircLvl1ID | read-only | current | On a point to point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initializat… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.35 | ColumnprvtIsisCircLvl1DesIS | read-only | current | The ID of the LAN-Designated Intermediate System on this circuit at level 1. If, for any reason, this system is not partaking in the relevant Designated Interm… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.36 | ColumnprvtIsisCircLvl1HelloMultiplier | read-create | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.37 | ColumnprvtIsisCircLvl1HelloTimer | read-create | current | Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at level 1 for LANs. The value at L1 is used as the period between Hellos on L1L2 poi… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.38 | ColumnprvtIsisCircLvl1DRHelloTimer | read-create | current | Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the ResettingTimer … |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.39 | ColumnprvtIsisCircLvl1LSPThrottle | read-create | current | Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at level 1. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.40 | ColumnprvtIsisCircLvl1MinLSPRetransInt | read-create | current | Minimum interval, in seconds, between re-transmission of an LSP at level 1. This object follows the ResettingTimer behavior. Note that prvtIsisCircLvl1LSPThrot… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.41 | ColumnprvtIsisCircLvl1CSNPInterval | read-create | current | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at level… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.42 | ColumnprvtIsisCircLvl1PartSNPInterval | read-create | current | Minimum interval in seconds between sending Partial Sequence Number PDUs at level 1. This object follows the ResettingTimer behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.43 | ColumnprvtIsisCircLvl1StickyDIS | read-create | current | Boost to add to the priority of this router (up to the maximum permitted value) when it becomes DIS at level 1 to make it more likely to remain DIS. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.44 | ColumnprvtIsisCircLvl1AuthUser | read-create | current | Authentication user data for level 1's authentication. This data is passed opaquely to the authentication interface where it can be used to assist with authent… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.45 | ColumnprvtIsisCircLvl1IDHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisCircLvl1ID object. This is the null string if the prvtIsisCircLvl1ID object is null, or if no h… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.46 | ColumnprvtIsisCircLvl1DesISHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisCircLvl1DesIS object. This is the null string if the prvtIsisCircLvl1DesIS object is null, or i… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.50 | ColumnprvtIsisCircLvl2Metric | read-create | current | The metric value of this circuit for level 2. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.51 | ColumnprvtIsisCircLvl2WideMetric | read-create | current | The wide metric value of this circuit for level 2. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.52 | ColumnprvtIsisCircLvl2ISPriority | read-create | current | The priority for becoming the LAN-Designated Intermediate System at level 2. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.53 | ColumnprvtIsisCircLvl2IDOctet | read-only | current | A one byte identifier for the circuit selected by the Intermediate System. On point-to-point circuits, the value is used as the Local Circuit ID in point-to-po… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.54 | ColumnprvtIsisCircLvl2ID | read-only | current | On a point to point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initializat… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.55 | ColumnprvtIsisCircLvl2DesIS | read-only | current | The ID of the LAN-Designated Intermediate System on this circuit at level 2. If, for any reason, this system is not partaking in the relevant Designated Interm… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.56 | ColumnprvtIsisCircLvl2HelloMultiplier | read-create | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.57 | ColumnprvtIsisCircLvl2HelloTimer | read-create | current | Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at level 2 for LANs. The value at L1 is used as the period between Hellos on L1L2 poi… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.58 | ColumnprvtIsisCircLvl2DRHelloTimer | read-create | current | Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the ResettingTimer … |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.59 | ColumnprvtIsisCircLvl2LSPThrottle | read-create | current | Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at level 2. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.60 | ColumnprvtIsisCircLvl2MinLSPRetransInt | read-create | current | Minimum interval, in seconds, between re-transmission of an LSP at level 2. This object follows the ResettingTimer behavior. Note that prvtIsisCircLvl2LSPThrot… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.61 | ColumnprvtIsisCircLvl2CSNPInterval | read-create | current | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at level… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.62 | ColumnprvtIsisCircLvl2PartSNPInterval | read-create | current | Minimum interval in seconds between sending Partial Sequence Number PDUs at level 2. This object follows the ResettingTimer behavior. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.63 | ColumnprvtIsisCircLvl2StickyDIS | read-create | current | Boost to add to the priority of this router (up to the maximum permitted value) when it becomes DIS at level 2 to make it more likely to remain DIS. |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.65 | ColumnprvtIsisCircLvl2IDHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisCircLvl2ID object. This is the null string if the prvtIsisCircLvl2ID object is null, or if no h… |
| 1.3.6.1.4.1.738.1.6.4.4.1.3.2.1.66 | ColumnprvtIsisCircLvl2DesISHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisCircLvl2DesIS object. This is the null string if the prvtIsisCircLvl2DesIS object is null, or i… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6 | NodeprvtIsisISAdj | |||
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1 | TableprvtIsisISAdjTable | not-accessible | current | The table of adjacencies to Intermediate Systems. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1 | RowprvtIsisISAdjEntry | not-accessible | current | Each entry corresponds to one adjacency to an Intermediate System on this system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.1 | ColumnprvtIsisISAdjIndex | not-accessible | current | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjace… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.2 | ColumnprvtIsisISAdjState | read-only | current | The state of the adjacency. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.3 | ColumnprvtIsisISAdj3WayState | read-only | current | The 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state, and are not intended to match prvtIsisI… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.4 | ColumnprvtIsisISAdjNeighSNPAAddress | read-only | current | The SNPA address of the neighboring system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.5 | ColumnprvtIsisISAdjNeighSysType | read-only | current | The type of the neighboring system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.6 | ColumnprvtIsisISAdjNeighSysID | read-only | current | The system ID of the neighboring Intermediate System. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.7 | ColumnprvtIsisISAdjNbrExtendedCircID | read-only | current | The 4-byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.8 | ColumnprvtIsisISAdjUsage | read-only | current | How is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at L1, and… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.9 | ColumnprvtIsisISAdjHoldTimer | read-only | current | The holding time in seconds for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.10 | ColumnprvtIsisISAdjNeighPriority | read-only | current | Priority of the neighboring Intermediate System for becoming the Designated Intermediate System. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.11 | ColumnprvtIsisISAdjLastUpTime | read-only | current | If the prvtIsisISAdjState is in state 'up', the value of sysUpTime when the adjacency most recently entered the state 'up', or 0 if it has never been in state … |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.12 | ColumnprvtIsisISAdjRestartCapable | read-only | current | Does the neighbor support restart signalling? This object is set to 'true' if the peer includes the restart TLV in IIH PDUs. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.13 | ColumnprvtIsisISAdjPeerRestartState | read-only | current | Is the peer currently restarting? Set to 'notRestarting' if the neighbor is not restarting (is not including a restart TLV in the IIH, or is not setting the RR… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.14 | ColumnprvtIsisISAdjSuppressed | read-only | current | Has the peer requested that the adjacency be suppressed? If set to 'true', the adjacency will not be added to the local LSP. This object is set to 'true' if th… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.15 | ColumnprvtIsisISAdjNeighLanID | read-only | current | On a broadcast circuit, the LAN ID reported by the neighbor for the Designated Intermediate System on this circuit at this level. For a non-broadcast circuit, … |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.16 | ColumnprvtIsisISAdjNeighHostname | read-only | current | The hostname corresponding to prvtIsisISAdjNeighSysID. This is the null string if prvtIsisSdEntMapHostnames is 'false' or if no hostname is known. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.1.1.17 | ColumnprvtIsisISAdjNeighLanIDHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisISAdjNeighLanID object. This is the null string if the prvtIsisISAdjNeighLanID object is null, … |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.2 | TableprvtIsisISAdjAreaAddrTable | not-accessible | current | This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.2.1 | RowprvtIsisISAdjAreaAddrEntry | not-accessible | current | Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.2.1.1 | ColumnprvtIsisISAdjAreaAddrIndex | not-accessible | current | An index for the areas associated with one neighbor. This provides a simple way to walk the table. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.2.1.2 | ColumnprvtIsisISAdjAreaAddress | read-only | current | One Area Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.3 | TableprvtIsisISAdjIPAddrTable | not-accessible | current | This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. If the prvtIsisSysRstrctLanAdjsToSubnet objec… |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.3.1 | RowprvtIsisISAdjIPAddrEntry | not-accessible | current | Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.3.1.1 | ColumnprvtIsisISAdjIPAddrIndex | not-accessible | current | An index to this table which identifies the IP addresss to which this entry belongs. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.3.1.2 | ColumnprvtIsisISAdjIPAddrType | read-only | current | The type of one IP Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.738.1.6.4.4.1.6.3.1.3 | ColumnprvtIsisISAdjIPAddrAddress | read-only | current | One IP Address as reported in IIH PDUs received from the neighbor. The type of this address is determined by the value of the prvtIsisISAdjIPAddrType object. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8 | NodeprvtIsisIPReachAddr | |||
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1 | TableprvtIsisIPRATable | not-accessible | current | The table of IP Reachable Addresses to networks, subnetworks or hosts, learned automatically. This table is read-only. Manual addition of entries using this ta… |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1 | RowprvtIsisIPRAEntry | not-accessible | current | Each entry defines an IP Reachable Address to a network, subnetwork or host. Each IP Reachable Address may have multiple entries in the table, one for each equ… |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.1 | ColumnprvtIsisIPRADestType | not-accessible | current | The type of this IP Reachable Address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.2 | ColumnprvtIsisIPRADest | not-accessible | current | The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. The type of this address is determined by t… |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.3 | ColumnprvtIsisIPRADestPrefixLen | not-accessible | current | The length of the IP Netmask for Reachability Address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.4 | ColumnprvtIsisIPRANextHopIndex | not-accessible | current | Index of next hop. Used when there are multiple Equal Cost Multipath alternatives for the same destination. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.5 | ColumnprvtIsisIPRANextHopType | read-only | current | The type of the IP next hop address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.6 | ColumnprvtIsisIPRANextHop | read-only | current | The IP next hop to this destination. The type of this address is determined by the value of the prvtIsisIPRANextHopType object. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.7 | ColumnprvtIsisIPRAType | read-only | current | The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of rout… |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.9 | ColumnprvtIsisIPRAAdminState | read-only | current | The administrative state of the IP Reachable Address. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.10 | ColumnprvtIsisIPRAMetric | read-only | current | The metric value for reaching the specified destination over this circuit. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.11 | ColumnprvtIsisIPRAMetricType | read-only | current | Indicates whether the metric is internal or external. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.12 | ColumnprvtIsisIPRAFullMetric | read-only | current | The wide metric value for reaching the specified destination over this circuit. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.13 | ColumnprvtIsisIPRASNPAAddress | read-only | current | The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This field is currently not supported. |
| 1.3.6.1.4.1.738.1.6.4.4.1.8.1.1.14 | ColumnprvtIsisIPRASourceType | read-only | current | The origin of this route. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9 | NodeprvtIsisLSPDataBase | |||
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1 | TableprvtIsisLSPSummaryTable | not-accessible | current | The table of LSP Headers. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1 | RowprvtIsisLSPSummaryEntry | not-accessible | current | Each entry provides a summary describing an LSP currently stored in the system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.1 | ColumnprvtIsisLSPLevel | not-accessible | current | At which level does this LSP appear? |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.2 | ColumnprvtIsisLSPID | not-accessible | current | The 8-byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.3 | ColumnprvtIsisLSPSeq | read-only | current | The sequence number for this LSP. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.4 | ColumnprvtIsisLSPZeroLife | read-only | current | Is this LSP being purged by this System? |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.5 | ColumnprvtIsisLSPChecksum | read-only | current | The 16 bit Fletcher Checksum for this LSP. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.6 | ColumnprvtIsisLSPLifetimeRemain | read-only | current | The remaining lifetime in seconds for this LSP. For a current LSP (prvtIsisLSPZeroLife is 'false'), this indicates the time remaining before the LSP will expir… |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.7 | ColumnprvtIsisLSPPDULength | read-only | current | The length of this LSP. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.8 | ColumnprvtIsisLSPAttributes | read-only | current | Flags carried by the LSP. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.1.1.9 | ColumnprvtIsisLSPIDHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisLSPID object. This is the null string if no hostname is known. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2 | TableprvtIsisLSPTLVTable | not-accessible | current | The table of LSPs in the database. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1 | RowprvtIsisLSPTLVEntry | not-accessible | current | Each entry describes a TLV within an LSP currently stored in the system. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.1 | ColumnprvtIsisLSPTLVIndex | not-accessible | current | The index of this TLV in the LSP. The first TLV has index 1 and the Nth TLV has an index of N. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.2 | ColumnprvtIsisLSPTLVSeq | read-only | current | The sequence number for this LSP. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.3 | ColumnprvtIsisLSPTLVChecksum | read-only | current | The 16 bit Fletcher Checksum for this LSP. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.4 | ColumnprvtIsisLSPTLVType | read-only | current | The type of this TLV. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.5 | ColumnprvtIsisLSPTLVLen | read-only | current | The length of this TLV. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.6 | ColumnprvtIsisLSPTLVValue | read-only | current | The value of this TLV. |
| 1.3.6.1.4.1.738.1.6.4.4.1.9.2.1.7 | ColumnprvtIsisLSPTLVHostname | read-only | current | The hostname corresponding to the system ID part of the prvtIsisLSPID object. This is the null string if no hostname is known. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrvtIsisAdminState | INTEGER { on(1), off(2) } | current | Type used in enabling and disabling a row. |
| PrvtIsisAuthUserDataString | OCTET STRING | current | Authentication user data. |
| PrvtIsisCircuitID | OCTET STRING | current | ID for a circuit. |
| PrvtIsisDefaultMetric | Integer32 (0..63) | current | Integer sub-range for default metric for single hop. ISO 10589 provides for 4 types of metric. Only the 'default' metric is used in practice. |
| PrvtIsisFullMetric | Unsigned32 | current | Full Metric for IP Routes. Traffic Engineering extensions provide 32 bit metrics. |
| PrvtIsisHostName | OCTET STRING | current | A valid host name. |
| PrvtIsisInetAddress | OCTET STRING (SIZE(4 | 16)) | current | An IPv4 IPv6 address depending upon the value of a matching InetAddressType object. An IPv4 address consiats of 4 octets in network-byte order. An IPv6 address consiats of 16 octets in network-byte order |
| PrvtIsisInetAddressType | INTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(5) } | current | A value that represents a type of Internet address. |
| PrvtIsisIPv4Address | OCTET STRING (SIZE(0 | 4)) | current | An IPv4 address consisting of 4 octets in network-byte order. A length of zero octets represents no IP address has been assigned. |
| PrvtIsisIPv6Address | OCTET STRING (SIZE(0 | 16)) | current | An IPv4 address consisting of 16 octets in network-byte order. A length of zero octets represents no IP address has been assigned. |
| PrvtIsisISLevel | INTEGER { none(0), area(1), domain(2) } | current | Identifies a level. |
| PrvtIsisISPriority | Integer32 (0..127) | current | Integer sub-range for IS-IS priority. |
| PrvtIsisLevelState | INTEGER { off(1), on(2), waiting(3), overloaded(4) } | current | States of the IS-IS protocol. |
| PrvtIsisLinkStatePDUID | OCTET STRING (SIZE(8)) | current | A Link State PDU Identifier. |
| PrvtIsisLSPBuffSize | Integer32 (512..16000) | current | Integer sub range for maximum LSP size. |
| PrvtIsisMaxAgeTC | Unsigned32 (350..65535) | current | TC for prvtIsisSysMaxAge. |
| PrvtIsisMetricStyle | INTEGER { narrow(1), wide(2), both(3) } | current | Do we use 1195 style Metrics or wide metrics. |
| PrvtIsisMetricType | INTEGER { internal(1), external(2) } | current | Is this an Internal or External Metric? |
| PrvtIsisOperStatus | INTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) } | current | The current operational state of an IS-IS entity. |
| PrvtIsisOSINSAddress | OCTET STRING (SIZE(1..20)) | current | OSI Network Service Address, e.g. NSAP, SNPA, or Network Entity Title |
| PrvtIsisReceiveLSPBufferSizeTC | Unsigned32 (1492..16000) | current | TC for prvtIsisSysReceiveLSPBufferSize |
| PrvtIsisSysRestartType | INTEGER { none(0), start(1), restart(2) } | current | The type of restart procedures to follow when IS-IS activates. |
| PrvtIsisSystemID | OCTET STRING | current | A ID for an Intermediate System. This should be unique within a network, and is included in all PDUs originated by an Intermediate System. The protocol does not place any meanings upon the bits, other than using orderin… |
| PrvtIsisUnsigned16NoZeroTC | Unsigned32 (1..65535) | current | Same as Unsigned16TC, except that 0 is not permitted. |
| PrvtIsisUnsigned16TC | Unsigned32 (0..65535) | current | An Unsigned32 further restricted to 16 Bits. Note that the ASN.1 BER encoding may still require 24 Bits for some values. |
| PrvtIsisUnsigned8TC | Unsigned32 (0..255) | current | An Unsigned32 further restricted to 8 Bits. Note that the ASN.1 BER encoding may still require 16 Bits for some values. |
| PrvtIsisWideMetric | Unsigned32 (0..16777215) | current | Wide Metric for IS Neighbors. ISO 10589 provides a 6 bit metric. Traffic Engineering extensions provide 24 bit metrics. |