PRVT-LMM-MIB
40 objects
Initial version. This MIB will configure laser monitoring
Imported Objects
| IF-MIB | ifIndex |
| PRVT-SWITCH-MIB | switch |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.5.172 | IdentityprvtLmmMIB | Initial version. This MIB will configure laser monitoring | ||
| 1.3.6.1.4.1.738.1.5.172.0 | NodeprvtLmmNotifications | |||
| 1.3.6.1.4.1.738.1.5.172.0.1 | NotificationprvtLmmTemperatureThresholdCrossed | current | The prvtLmmTemperatureThresholdCrossed shall be generated when prvtLmmInterfaceTempValue rises above prvtLmmInterfaceTempThresholdHi or falls below prvtLmmInte… | |
| 1.3.6.1.4.1.738.1.5.172.0.2 | NotificationprvtLmmTxPowerThresholdCrossed | current | The prvtLmmTxPowerThresholdCrossed shall be generated when prvtLmmInterfaceTxPowerValue rises above prvtLmmInterfaceTxPowerThresholdTxHi or falls below prvtLmm… | |
| 1.3.6.1.4.1.738.1.5.172.0.3 | NotificationprvtLmmRxPowerThresholdCrossed | current | The prvtLmmRxPowerThresholdCrossed shall be generated when prvtLmmInterfaceRxPowerValue rises above prvtLmmInterfaceRxPowerThresholdRxHi or falls below prvtLmm… | |
| 1.3.6.1.4.1.738.1.5.172.1 | NodeprvtLmmObjects | |||
| 1.3.6.1.4.1.738.1.5.172.1.1 | ScalarprvtLmmShutdown | read-write | current | Enable/disable laser monitoring |
| 1.3.6.1.4.1.738.1.5.172.1.2 | ScalarprvtLmmDebug | read-write | current | Enable/Disable laser monitoring |
| 1.3.6.1.4.1.738.1.5.172.1.3 | ScalarprvtLmmPeriod | read-write | current | Specify the monitoring interval (sec). |
| 1.3.6.1.4.1.738.1.5.172.1.4 | ScalarprvtLmmTrap | read-write | current | Enable/Disable sending SNMP traps when thresholds are crossed |
| 1.3.6.1.4.1.738.1.5.172.1.5 | ScalarprvtLmmLog | read-write | current | Enable/Disable alert notification logging when thresholds are crossed |
| 1.3.6.1.4.1.738.1.5.172.1.6 | ScalarprvtLmmLed | read-write | current | Enable/Disable LED-alert notifications when thresholds are crossed |
| 1.3.6.1.4.1.738.1.5.172.1.7 | ScalarprvtLmmTemperatureHighThreshold | read-write | current | Specify the low threshold value for global temperature (-128 up to 128). prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.8 | ScalarprvtLmmTemperatureLowThreshold | read-write | current | Specify the low threshold value for global temperature (-128 up to 128). prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.9 | ScalarprvtLmmRxPowerLowThreshold | read-write | current | Specify the low threshold value for global RX-power (-40 up to 8) prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.10 | ScalarprvtLmmRxPowerHighThreshold | read-write | current | Specify the high threshold value for global RX-power (-40 up to 8) prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.11 | ScalarprvtLmmTxPowerLowThreshold | read-write | current | Specify the low threshold value for global RX-power (-40 up to 8) prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.12 | ScalarprvtLmmTxPowerHighThreshold | read-write | current | Specify the high threshold value for global RX-power (-40 up to 8) prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.13 | TableprvtLmmInterfaceTable | not-accessible | current | Lmm configuration per ethernet port |
| 1.3.6.1.4.1.738.1.5.172.1.13.1 | RowprvtLmmInterfaceEntry | not-accessible | current | The Stack table entry |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.1 | ColumnprvtLmmInterfaceShutdown | read-write | current | Enable/Disable laser monitoring on port |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.2 | ColumnprvtLmmInterfaceTempLowThreshold | read-write | current | Specify the low threshold value for port temperature |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.3 | ColumnprvtLmmInterfaceTempHighThreshold | read-write | current | Specify the high threshold value for port temperature. Value of prvtLmmInterfaceTempHighThreshold must be greater than prvtLmmInterfaceTempLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.4 | ColumnprvtLmmInterfaceTempValue | read-only | current | Display laser Temperature current value |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.5 | ColumnprvtLmmInterfaceTempThresholdLo | read-only | current | The thresholds read from hardware or set by user |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.6 | ColumnprvtLmmInterfaceTempThresholdHi | read-only | current | The thresholds read from hardware or set by user |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.7 | ColumnprvtLmmInterfaceTempTestState | read-only | current | The state test |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.8 | ColumnprvtLmmInterfaceRxPowerLowThreshold | read-write | current | Specify the low threshold value for port RX-power. |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.9 | ColumnprvtLmmInterfaceRxPowerHighThreshold | read-write | current | Specify the high threshold value for port RX-power. Value of prvtLmmInterfaceRxPowerHighThreshold must be greater than prvtLmmInterfaceRxPowerLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.10 | ColumnprvtLmmInterfaceRxPowerValue | read-only | current | Display laser Rx Power current value |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.11 | ColumnprvtLmmInterfaceRxPowerThresholdRxLo | read-only | current | The thresholds read from hardware or set by user |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.12 | ColumnprvtLmmInterfaceRxPowerThresholdRxHi | read-only | current | The thresholds read from hardware or set by user |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.13 | ColumnprvtLmmInterfaceRxPowerTestState | read-only | current | The state test |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.14 | ColumnprvtLmmInterfaceTxPowerLowThreshold | read-write | current | Specify the low threshold value for port TX-power |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.15 | ColumnprvtLmmInterfaceTxPowerHighThreshold | read-write | current | Specify the high threshold value for port TX-power Value of prvtLmmInterfaceTxPowerHighThreshold must be greater than prvtLmmInterfaceTxPowerLowThreshold |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.16 | ColumnprvtLmmInterfaceTxPowerValue | read-only | current | Display laser Tx Power current value |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.17 | ColumnprvtLmmInterfaceTxPowerThresholdTxLo | read-only | current | The thresholds read from hardware or set by user |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.18 | ColumnprvtLmmInterfaceTxPowerThresholdTxHi | read-only | current | The thresholds read from hardware or set by user |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.19 | ColumnprvtLmmInterfaceTxPowerTestState | read-only | current | The state test |
| 1.3.6.1.4.1.738.1.5.172.1.13.1.20 | ColumnprvtLmmInterfaceOperStatus | read-only | current | Operational status |