PRVT-MPLS-IF-MIB
40 objects
This module includes configuration parameters for MPLS and RSVP interface specific parameters.
Imported Objects
| IF-MIB | ifEntry ifIndex |
| INET-ADDRESS-MIB | InetAddress |
| PRVT-CR-LDP-MIB | mpls |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.6 | IdentityprvtMPLSIfMib | This module includes configuration parameters for MPLS and RSVP interface specific parameters. | ||
| 1.3.6.1.4.1.738.1.6.5.6.1 | NodeprvtMPLSIfaceObjs | |||
| 1.3.6.1.4.1.738.1.6.5.6.1.1 | TableprvtMplsIfaceTable | not-accessible | current | This table contains object for configuring MPLS and LDP interface specific parameters. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1 | RowprvtMplsIfaceEntry | not-accessible | current | The MPLS/LDP configuration of an IP interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.1 | ColumnifaceMplsEnable | read-write | current | Enable or disable MPLS on this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.2 | ColumnifaceMplsPHPEnable | read-write | current | Enable or disable Penultimate Hop Popping on this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.3 | ColumnifaceMplsIngressLblRangeLow | read-write | current | This is the lower border of the Ingress Lable Range for this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.4 | ColumnifaceMplsIngressLblRangeHigh | read-write | current | This is the higher border of the Ingress Lable Range for this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.5 | ColumnifaceMplsEgressLblRangeLow | read-write | current | This is the lower border of the Egress Lable Range for this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.6 | ColumnifaceMplsEgressLblRangeHigh | read-write | current | This is the higher border of the Egress Lable Range for this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.7 | ColumnifaceMplsLdpHelloHoldTimer | read-write | current | LDP Hello Hold Time. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.8 | ColumnifaceMplsLdpKeepaliveHoldTimer | read-write | current | LDP Hello Keep-alive Time. |
| 1.3.6.1.4.1.738.1.6.5.6.1.1.1.9 | ColumnifaceMplsLdpUseGlobalLabelSpace | read-write | current | Default value is true and correct value is true. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2 | TableprvtRsvpIfaceTable | not-accessible | current | This table contains object for configuring RSVP interface specific parameters. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1 | RowprvtRsvpIfaceEntry | not-accessible | current | The MPLS/LDP configuration of an IP interface. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.1 | ColumnifaceRsvpRefreshInterval | read-write | current | The RSVP value, R, which is used to set the average interval between refresh path and resv messages. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.2 | ColumnifaceRsvpRefreshMultiple | read-write | current | The RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deem… |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.3 | ColumnifaceRsvpSlewNumerator | read-write | current | The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is inc… |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.4 | ColumnifaceRsvpSlewDenom | read-write | current | The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is i… |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.5 | ColumnifaceRsvpBlockadeMultiple | read-write | current | The RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.6 | ColumnifaceRsvpNotifyRRDecay | read-write | current | The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Notify message. A value of 0 indicates a constant retrans… |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.7 | ColumnifaceRsvpNotifyRRInterval | read-write | current | The interval in milliseconds before a Notify message is first resent if no acknowledgement is received. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.8 | ColumnifaceRsvpNotifyRRLimit | read-write | current | The maximum number of times a Notify message is resent if no acknowledgement is received. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.9 | ColumnifaceRsvpHelloInterval | read-write | current | The interval between sending consecutive Hello messages. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.10 | ColumnifaceRsvpHelloDecay | read-write | current | Percentage increase of hello interval after each Hello message sent when the hello session with the neighbor has timed out. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.11 | ColumnifaceRsvpHelloTolerance | read-write | current | The number of hello periods which may pass without receiving a successful Hello message from a partner before the Hello session times out. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.12 | ColumnifaceRsvpHelloPersist | read-write | current | The number of hello periods which may pass after the Hello session times out before Hello messages cease. |
| 1.3.6.1.4.1.738.1.6.5.6.1.2.1.13 | ColumnifaceRsvpHelloTTL | read-write | current | The Time To Live that will be set in the IP header of all Hello packets sent to the neighbor associated with this interface. |
| 1.3.6.1.4.1.738.1.6.5.6.2 | NodeprvtMPLSRouteObjs | |||
| 1.3.6.1.4.1.738.1.6.5.6.2.1 | TableprvtMplsRouteProtocolTable | not-accessible | current | This table contains for configuring the egress and ingress routes for LDP label packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel… |
| 1.3.6.1.4.1.738.1.6.5.6.2.1.1 | RowprvtMplsRouteProtocolEntry | not-accessible | current | An entry in the table represents the configuration of a particular route type for ingress or egress. |
| 1.3.6.1.4.1.738.1.6.5.6.2.1.1.1 | ColumnprvtMplsRouteDirection | read-only | current | The direction of the route that will be used to receive or send LDP packets. |
| 1.3.6.1.4.1.738.1.6.5.6.2.1.1.2 | ColumnprvtMplsRouteType | read-only | current | The type of the route which will be used to send or receive LDP packets. |
| 1.3.6.1.4.1.738.1.6.5.6.2.1.1.3 | ColumnprvtMplsRouteRowStatus | read-create | current | This object is used to create an entry in the table. Only createAndGo(4) should be used. |
| 1.3.6.1.4.1.738.1.6.5.6.2.2 | TableprvtMplsRouteAddressTable | not-accessible | current | This table contains for configuring the egress and ingress routes for LDP label packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel… |
| 1.3.6.1.4.1.738.1.6.5.6.2.2.1 | RowprvtMplsRouteAddressEntry | not-accessible | current | An entry in the table represents the configuration of a particular route type for ingress or egress. |
| 1.3.6.1.4.1.738.1.6.5.6.2.2.1.1 | ColumnprvtMplsAddressDirection | read-only | current | The direction of the route that will be used to receive or send LDP packets. |
| 1.3.6.1.4.1.738.1.6.5.6.2.2.1.2 | ColumnprvtMplsAddressIPAddr | read-only | current | The IP address of the route that will be used to send or receive LDP packets. |
| 1.3.6.1.4.1.738.1.6.5.6.2.2.1.3 | ColumnprvtMplsAddressMask | read-only | current | The mask for the IP address of the route that will be used to send or receive LDP packets. |
| 1.3.6.1.4.1.738.1.6.5.6.2.2.1.4 | ColumnprvtMplsAddressRowStatus | read-create | current | This object is used to create an entry in the table. Only createAndGo(4) should be used. |