PRVT-MPLS-LDP-MIB
209 objects
This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP'.
Imported Objects
| ATM-TC-MIB | -- AtmVpIdentifier -- |
| DIFFSERV-MIB | -- IndexInteger -- |
| FRAME-RELAY-DTE-MIB | -- DLCI -- |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| MPLS-LSR-MIB | MplsIndexType |
| MPLS-TC-PRIV-STDEXT-MIB | MplsAtmVcIdentifier MplsLabelDistributionMethod MplsLdpIdentifier MplsLdpLabelType MplsLspType MplsLsrIdentifier MplsRetentionMode mplsStdMIB |
| PRVT-CR-LDP-MIB | mpls prvtcrldpPmIndex prvtcrldpSigIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.1 | IdentitymplsLdpStdMIB | This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP'. | ||
| 1.3.6.1.4.1.738.1.6.5.1.1 | NodemplsLdpObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.1.1 | NodemplsLdpLsrObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.1.1.1 | TablemplsLdpLsrTable | not-accessible | current | This table contains information about the Label Switching Router (LSR) or Label Edge Router (LER) that is running the MPLS Label Distribution Protocol. |
| 1.3.6.1.4.1.738.1.6.5.1.1.1.1.1 | RowmplsLdpLsrEntry | not-accessible | current | An entry in this table contains the LSR objects specific to an instance of PRVT-CR-LDP. |
| 1.3.6.1.4.1.738.1.6.5.1.1.1.1.1.1 | ColumnmplsLdpLsrId | read-only | current | The Label Switching Router's Identifier. |
| 1.3.6.1.4.1.738.1.6.5.1.1.1.1.1.2 | ColumnmplsLdpLsrLoopDetectionCapable | read-only | current | A indication of whether this Label Switching Router supports loop detection. none(1) on this LSR. other(2) by a method other than those listed below. hopCount(… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2 | NodemplsLdpEntityObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1 | TablemplsLdpEntityTable | not-accessible | current | This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switching Router (LSR) or Label Edge Router (LER). |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1 | RowmplsLdpEntityEntry | not-accessible | current | An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.1 | ColumnmplsLdpEntityLdpId | not-accessible | current | The LDP identifier. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.2 | ColumnmplsLdpEntityIndex | not-accessible | current | This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIndexNext' object should be retri… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.3 | ColumnmplsLdpEntityProtocolVersion | read-create | current | The version number of the protocol. The value of 0 on a read indicates that the version of the protocol is unknown. Otherwise, the value of this object represe… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.4 | ColumnmplsLdpEntityAdminStatus | read-create | current | The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact w… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.5 | ColumnmplsLdpEntityOperStatus | read-only | current | The operational status of this LDP Entity. The value of unknown(1) indicates that the operational status cannot be determined at this time. The value of unknow… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.6 | ColumnmplsLdpEntityWellKnownTcpDiscoveryPort | read-create | current | The TCP Port for LDP. The default value is the well-known value of this port. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.7 | ColumnmplsLdpEntityWellKnownUdpDiscoveryPort | read-create | current | The UDP Discovery Port for LDP. The default value is the well-known value for this port. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.8 | ColumnmplsLdpEntityMaxPduLength | read-only | current | The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 … |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.9 | ColumnmplsLdpEntityKeepAliveHoldTimer | read-create | current | The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.10 | ColumnmplsLdpEntityHelloHoldTimer | read-create | current | The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos receiv… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.11 | ColumnmplsLdpEntityInitSessionThreshold | read-create | current | When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInitSessionThresholdExceeded', wh… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.12 | ColumnmplsLdpEntityLabelDistMethod | read-create | current | For any given LDP session, the method of label distribution must be specified. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.13 | ColumnmplsLdpEntityLabelRetentionMode | read-create | current | The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized lab… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.14 | ColumnmplsLdpEntityPathVectorLimit | read-only | current | If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop De… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.15 | ColumnmplsLdpEntityHopCountLimit | read-only | current | If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greater than 0 (zero) then Loop Det… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.16 | ColumnmplsLdpEntityTransportAddrKind | read-create | current | This specifies whether the loopback or interface address is to be used as the transport address in the transport address TLV of the hello message. If the value… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.17 | ColumnmplsLdpEntityTargetPeer | read-create | current | If this LDP entity uses targeted peer then set this to true. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.18 | ColumnmplsLdpEntityTargetPeerAddrType | read-create | current | The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntityTargetPeerAddr is to be interpr… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.19 | ColumnmplsLdpEntityTargetPeerAddr | read-create | current | The value of the internetwork layer address used for the Extended Discovery. The value of mplsLdpEntityTargetPeerAddrType specifies how this address is to be i… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.20 | ColumnmplsLdpEntityLabelType | read-create | current | Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initializa… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.21 | ColumnmplsLdpEntityDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. The relevant counters are the s… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.22 | ColumnmplsLdpEntityStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.24 | ColumnmplsLdpEntityWildcardEntity | read-create | current | Specifies whether the LDP Entity is to be used for accepting 'unsolicited' Hello messages that include the R bit. The value of this object is ignored unless mp… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.25 | ColumnmplsLdpEntityRowStatus | read-create | current | An object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'mplsLdpEntityAdminStatus' object has the value … |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.2 | TablemplsLdpEntityIndexNextTable | not-accessible | current | This table contains the next available values of mplsLdpEntityIndex for all entities. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.2.1 | RowmplsLdpEntityIndexNextEntry | not-accessible | current | An entry in this table represents the next available mplsLdpEntityIndex for a specific LDP entity. This MIB table is indexed by the PRVT-LDP entity Index. |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.2.1.1 | ColumnmplsLdpEntityIndexNext | read-only | current | This object contains an appropriate value to be used for mplsLdpEntityIndex when creating entries in the mplsLdpEntityTable. The value 0 indicates that no unas… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4 | TablemplsLdpEntityStatsTable | not-accessible | current | This table is a read-only table which augments the mplsLdpEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on t… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1 | RowmplsLdpEntityStatsEntry | not-accessible | current | A row in this table contains statistical information about an LDP Entity. Some counters contained in a row are for fatal errors received during a former LDP Se… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.1 | ColumnmplsLdpEntityStatsSessionAttempts | read-only | current | A count of the Session Initialization messages which were sent or received by this LDP Entity and were NAK'd. In other words, this counter counts the number of… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.2 | ColumnmplsLdpEntityStatsSessionRejectedNoHelloErrors | read-only | current | A count of the Session Rejected/No Hello Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.3 | ColumnmplsLdpEntityStatsSessionRejectedAdErrors | read-only | current | A count of the Session Rejected/Parameters Advertisement Mode Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of … |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.4 | ColumnmplsLdpEntityStatsSessionRejectedMaxPduErrors | read-only | current | A count of the Session Rejected/Parameters Max Pdu Length Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.5 | ColumnmplsLdpEntityStatsSessionRejectedLRErrors | read-only | current | A count of the Session Rejected/Parameters Label Range Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter … |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.6 | ColumnmplsLdpEntityStatsBadLdpIdentifierErrors | read-only | current | This object counts the number of Bad LDP Identifier Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.7 | ColumnmplsLdpEntityStatsBadPduLengthErrors | read-only | current | This object counts the number of Bad PDU Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in … |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.8 | ColumnmplsLdpEntityStatsBadMessageLengthErrors | read-only | current | This object counts the number of Bad Message Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.9 | ColumnmplsLdpEntityStatsBadTlvLengthErrors | read-only | current | This object counts the number of Bad TLV Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in … |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.10 | ColumnmplsLdpEntityStatsMalformedTlvValueErrors | read-only | current | This object counts the number of Malformed TLV Value Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuitie… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.11 | ColumnmplsLdpEntityStatsKeepAliveTimerExpErrors | read-only | current | This object counts the number of Session Keep Alive Timer Expired Errors detected by the session(s) (past and present) associated with this LDP Entity. Discont… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.12 | ColumnmplsLdpEntityStatsShutdownReceivedNotifications | read-only | current | This object counts the number of Shutdown Notifications received related to session(s) (past and present) associated with this LDP Entity. Discontinuities in t… |
| 1.3.6.1.4.1.738.1.6.5.1.1.2.4.1.13 | ColumnmplsLdpEntityStatsShutdownSentNotifications | read-only | current | This object counts the number of Shutdown Notfications sent related to session(s) (past and present) associated with this LDP Entity. Discontinuities in the va… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3 | NodemplsLdpSessionObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.1.3.1 | ScalarmplsLdpPeerLastChange | read-only | current | The value of sysUpTime at the time of the most recent addition or deletion to/from the mplsLdpPeerTable/mplsLdpSessionTable. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2 | TablemplsLdpPeerTable | not-accessible | current | Information about LDP peers known by Entities in the mplsLdpEntityTable. The information in this table is based on information from the Entity-Peer interaction… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2.1 | RowmplsLdpPeerEntry | not-accessible | current | Information about a single Peer which is related to a Session. NOTE: this table is used to augment the mplsLdpSessionTable. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2.1.1 | ColumnmplsLdpPeerLdpId | not-accessible | current | The LDP identifier of this LDP Peer. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2.1.2 | ColumnmplsLdpPeerLabelDistMethod | read-only | current | For any given LDP session, the method of label distribution must be specified. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2.1.3 | ColumnmplsLdpPeerPathVectorLimit | read-only | current | If the value of this object is 0 (zero) then Loop Dection for Path Vectors for this Peer is disabled. Otherwise, if this object has a value greater than zero, … |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2.1.4 | ColumnmplsLdpPeerTransportAddrType | read-only | current | The type of the Internet address for the mplsLdpPeerTransportAddr object. The LDP specification describes this as being either an IPv4 Transport Address or IPv… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.2.1.5 | ColumnmplsLdpPeerTransportAddr | read-only | current | The Internet address advertised by the peer in the Hello Message or the Hello source address. The type of this address is specified by the value of the mplsLdp… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3 | TablemplsLdpSessionTable | not-accessible | current | A table of Sessions between the LDP Entities and LDP Peers. Each row in this table represents a single session. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1 | RowmplsLdpSessionEntry | not-accessible | current | An entry in this table represents information on a single session between an LDP Entity and LDP Peer. The information contained in a row is read-only. Please n… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.1 | ColumnmplsLdpSessionStateLastChange | read-only | current | The value of sysUpTime at the time this Session entered its current state as denoted by the mplsLdpSessionState object. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.2 | ColumnmplsLdpSessionState | read-only | current | The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.3 | ColumnmplsLdpSessionRole | read-only | current | During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.4 | ColumnmplsLdpSessionProtocolVersion | read-only | current | The version of the LDP Protocol which this session is using. This is the version of the LDP protocol which has been negotiated during session initialization. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.5 | ColumnmplsLdpSessionKeepAliveHoldTimeRemaining | read-only | current | The keep alive hold time remaining for this session in units of hundredths of a second. This interval will change when the 'next' Keep Alive message which corr… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.6 | ColumnmplsLdpSessionKeepAliveTime | read-only | current | The negotiated KeepAlive Time which represents the amount of seconds between keep alive messages. The mplsLdpEntityKeepAliveHoldTimer related to this Session i… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.7 | ColumnmplsLdpSessionMaxPduLength | read-only | current | The value of maximum allowable length for LDP PDUs for this session. This value may have been negotiated during the Session Initialization. This object is rela… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.8 | ColumnmplsLdpSessionDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the … |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.13 | ColumnmplsLdpSessionConfiguredHoldTime | read-only | current | The locally configured keepalive hold time for this session, in seconds. Note that the value of this field reflects configuration at the time of session initia… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.14 | ColumnmplsLdpSessionPeerHoldTime | read-only | current | The peer's advertised keepalive hold time for this session in seconds. Note that the value of this field reflects the peer's configuration at the time of sessi… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.3.1.15 | ColumnmplsLdpSessionHoldTimeInUse | read-only | current | The keepalive hold time that is currently in use for this session, in seconds. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.4 | TablemplsLdpSessionStatsTable | not-accessible | current | A table of statistics for Sessions between LDP Entities and LDP Peers. The table is read only. Counters are only incremented when the U bit is not set. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.4.1 | RowmplsLdpSessionStatsEntry | not-accessible | current | An entry in this table represents statistical information on a single session between an LDP Entity and LDP Peer. Errors are only counted if the U bit is not s… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.4.1.1 | ColumnmplsLdpSessionStatsUnknownMesTypeErrors | read-only | current | This object counts the number of Unknown Message Type Errors detected by this LSR/LER during this session. Discontinuities in the value of this counter can occ… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.4.1.2 | ColumnmplsLdpSessionStatsUnknownTlvErrors | read-only | current | This object counts the number of Unknown TLV Errors detected by this LSR/LER during this session. Discontinuities in the value of this counter can occur at re-… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5 | NodemplsLdpHelloAdjacencyObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1 | TablemplsLdpHelloAdjacencyTable | not-accessible | current | A table of Hello Adjacencies for Sessions. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1 | RowmplsLdpHelloAdjacencyEntry | not-accessible | current | Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1.1 | ColumnmplsLdpHelloAdjacencyIndex | not-accessible | current | An identifier for this specific adjacency. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1.2 | ColumnmplsLdpHelloAdjacencyHoldTimeRemaining | read-only | current | If the value of this object is 65535, this means that the hold time is infinite (i.e., wait forever). Otherwise, the time remaining for this Hello Adjacency to… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1.3 | ColumnmplsLdpHelloAdjacencyHoldTime | read-only | current | The Hello hold time which is negotiated between the Entity and the Peer. The entity associated with this Hello Adjacency issues a proposed Hello Hold Time valu… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1.4 | ColumnmplsLdpHelloAdjacencyType | read-only | current | This adjacency is the result of a 'link' hello if the value of this object is link(1). Otherwise, it is a result of a 'targeted' hello, targeted(2). |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1.5 | ColumnmplsLdpHelloAdjacencyConfiguredHoldTime | read-only | current | The locally configured hello hold time for this adjacency, in seconds. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.5.1.1.6 | ColumnmplsLdpHelloAdjacencyPeerHoldTime | read-only | current | The peer's advertised hello hold time for this adjacency, in seconds. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.6 | TablemplsInSegmentLdpLspTable | not-accessible | current | A table of LDP LSPs which map to the mplsInSegmentTable in the MPLS-LSR-MIB module. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.6.1 | RowmplsInSegmentLdpLspEntry | not-accessible | current | An entry in this table represents information on a single LDP LSP which is represented by a session's index triple (mplsLdpEntityLdpId, mplsLdpEntityIndex, mpl… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.6.1.1 | ColumnmplsInSegmentLdpLspIndex | not-accessible | current | This contains the same value as the mplsInSegmentIndex in the MPLS-LSR-MIB's mplsInSegmentTable. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.6.1.2 | ColumnmplsInSegmentLdpLspLabelType | read-only | current | The Layer 2 Label Type. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.6.1.3 | ColumnmplsInSegmentLdpLspType | read-only | current | The type of LSP connection. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.7 | TablemplsOutSegmentLdpLspTable | not-accessible | current | A table of LDP LSPs which map to the mplsOutSegmentTable in the MPLS-LSR-MIB. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.7.1 | RowmplsOutSegmentLdpLspEntry | not-accessible | current | An entry in this table represents information on a single LDP LSP which is represented by a session's index triple (mplsLdpEntityLdpId, mplsLdpEntityIndex, mpl… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.7.1.1 | ColumnmplsOutSegmentLdpLspIndex | not-accessible | current | This contains the same value as the mplsOutSegmentIndex in the MPLS-LSR-MIB's mplsOutSegmentTable. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.7.1.2 | ColumnmplsOutSegmentLdpLspLabelType | read-only | current | The Layer 2 Label Type. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.7.1.3 | ColumnmplsOutSegmentLdpLspType | read-only | current | The type of LSP connection. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10 | NodemplsFecObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.1 | ScalarmplsFecLastChange | read-only | current | The value of sysUpTime at the time of the most recent addition/deletion of an entry to/from the mplsLdpFectTable or the most recent change in values to any obj… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2 | TablemplsFecTable | not-accessible | current | This table represents the FEC (Forwarding Equivalence Class) Information associated with an LSP. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1 | RowmplsFecEntry | not-accessible | current | Each row represents a single FEC Element. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1.1 | ColumnmplsFecIndex | not-accessible | current | The index which uniquely identifies this entry. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1.2 | ColumnmplsFecType | read-only | current | The type of the FEC. If the value of this object is 'prefix(1)' then the FEC type described by this row is an address prefix. If the value of this object is 'h… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1.3 | ColumnmplsFecAddrPrefixLength | read-only | current | If the value of the 'mplsFecType' is 'hostAddress(2)' then this object is undefined. If the value of 'mplsFecType' is 'prefix(1)' then the value of this object… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1.4 | ColumnmplsFecAddrType | read-only | current | The value of this object is the type of the Internet address. The value of this object, decides how the value of the mplsFecAddr object is interpreted. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1.5 | ColumnmplsFecAddr | read-only | current | The value of this object is interpreted based on the value of the 'mplsFecAddrType' object. This address is then further interpretted as an being used with the… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.10.2.1.6 | ColumnmplsFecStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.11 | ScalarmplsLdpLspFecLastChange | read-only | current | The value of sysUpTime at the time of the most recent addition/deletion of an entry to/from the mplsLdpLspFecTable or the most recent change in values to any o… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12 | TablemplsLdpLspFecTable | not-accessible | current | A table which shows the relationship between LDP LSPs and FECs. Each row represents a single LDP LSP to FEC association. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12.1 | RowmplsLdpLspFecEntry | not-accessible | current | An entry represents a LDP LSP to FEC association. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12.1.1 | ColumnmplsLdpLspFecSegment | not-accessible | current | If the value is inSegment(1), then this indicates that the following index, mplsLdpLspFecSegmentIndex, contains the same value as the mplsInSegmentLdpLspIndex.… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12.1.2 | ColumnmplsLdpLspFecSegmentIndex | not-accessible | current | This index is interpretted by using the value of the mplsLdpLspFecSegment. If the mplsLdpLspFecSegment is inSegment(1), then this index has the same value as m… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12.1.3 | ColumnmplsLdpLspFecIndex | not-accessible | current | This index identifies the FEC entry in the mplsFecTable associated with this session. In other words, the value of this index is the same as the value of the m… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12.1.4 | ColumnmplsLdpLspFecStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.12.1.5 | ColumnmplsLdpLspFecRowStatus | read-create | current | The status of this conceptual row. If the value of this object is 'active(1)', then none of the writable objects of this entry can be modified. The Agent shoul… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.13 | TablemplsLdpSessionPeerAddrTable | not-accessible | current | This table 'extends' the mplsLdpSessionTable. This table is used to store Label Address Information from Label Address Messages received by this LSR from Peers… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.13.1 | RowmplsLdpSessionPeerAddrEntry | not-accessible | current | An entry in this table represents information on a session's single next hop address which was advertised in an Address Message from the LDP peer. The informat… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.13.1.1 | ColumnmplsLdpSessionPeerAddrIndex | not-accessible | current | An index which uniquely identifies this entry within a given session. |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.13.1.2 | ColumnmplsLdpSessionPeerNextHopAddrType | read-only | current | The internetwork layer address type of this Next Hop Address as specified in the Label Address Message associated with this Session. The value of this object i… |
| 1.3.6.1.4.1.738.1.6.5.1.1.3.13.1.3 | ColumnmplsLdpSessionPeerNextHopAddr | read-only | current | The next hop address. The type of this address is specified by the value of the mplsLdpSessionPeerNextHopAddrType. |
| 1.3.6.1.4.1.738.1.6.5.1.2.0 | NodemplsLdpNotifications | |||
| 1.3.6.1.4.1.738.1.6.5.1.2.0.1 | NotificationmplsLdpInitSessionThresholdExceeded | current | This notification is generated when the value of the 'mplsLdpEntityInitSessionThreshold' object is not zero, and the number of Session Initialization messages … | |
| 1.3.6.1.4.1.738.1.6.5.1.2.0.2 | NotificationmplsLdpPathVectorLimitMismatch | current | This notification is sent when the 'mplsLdpEntityPathVectorLimit' does NOT match the value of the 'mplsLdpPeerPathVectorLimit' for a specific Entity. | |
| 1.3.6.1.4.1.738.1.6.5.1.2.0.3 | NotificationmplsLdpSessionUp | current | If this notification is sent when the value of 'mplsLdpSessionState' enters the 'operational(5)' state. | |
| 1.3.6.1.4.1.738.1.6.5.1.2.0.4 | NotificationmplsLdpSessionDown | current | This notification is sent when the value of 'mplsLdpSessionState' leaves the 'operational(5)' state. | |
| 1.3.6.1.4.1.738.1.6.5.1.3 | NodemplsLdpConformance | |||
| 1.3.6.1.4.1.738.1.6.5.1.3.1 | NodemplsLdpGroups | |||
| 1.3.6.1.4.1.738.1.6.5.1.3.1.1 | GroupmplsLdpGeneralGroup | current | Objects that apply to all MPLS LDP implementations. | |
| 1.3.6.1.4.1.738.1.6.5.1.3.1.2 | GroupmplsLdpLspGroup | current | These objects are for LDP implementations which interface to the Label Information Base (LIB) in the MPLS-LSR-STD-MIB. The LIB is represented in the mplsInSegm… | |
| 1.3.6.1.4.1.738.1.6.5.1.3.1.3 | GroupmplsLdpNotificationsGroup | current | The notification for an MPLS LDP implementation. | |
| 1.3.6.1.4.1.738.1.6.5.1.3.2 | NodemplsLdpCompliances | |||
| 1.3.6.1.4.1.738.1.6.5.1.3.2.1 | CompliancemplsLdpModuleFullCompliance | current | The Module is implemented with support for read-create and read-write. In other words, both monitoring and configuration are available when using this MODULE-C… | |
| 1.3.6.1.4.1.738.1.6.5.1.3.2.2 | CompliancemplsLdpModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
| 1.3.6.1.4.1.738.1.6.5.1.4 | NodemplsLdpAtmObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.4.1 | NodemplsLdpEntityAtmObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1 | TablemplsLdpEntityAtmTable | not-accessible | current | This table contains ATM specific information which could be used in the 'Optional Parameters' and other ATM specific information. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1 | RowmplsLdpEntityAtmEntry | not-accessible | current | An entry in this table represents the ATM parameters and ATM information for this LDP entity. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.1 | ColumnmplsLdpEntityAtmIfIndexOrZero | read-only | current | This value represents either the InterfaceIndex or 0 (zero). The value of zero means that the InterfaceIndex is not known. However, if the InterfaceIndex is kn… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.2 | ColumnmplsLdpEntityAtmMergeCap | read-only | current | Denotes the Merge Capability of this Entity. This is the EXACT value for the ATM Session Parameter, field M (for ATM Merge Capabilities). The ATM Session Param… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.3 | ColumnmplsLdpEntityAtmLRComponents | read-only | current | Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityAtmLRTable which correspond to t… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.4 | ColumnmplsLdpEntityAtmVcDirectionality | read-only | current | If the value of this object is 'bidirectional(0)', a given VCI, within a given VPI, is used as a label for both directions independently. If the value of this … |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.5 | ColumnmplsLdpEntityAtmLsrConnectivity | read-only | current | The peer LSR may be connected indirectly by means of an ATM VP so that the VPI values may be different on either endpoint so the label MUST be encoded entirely… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.6 | ColumnmplsLdpEntityAtmDefaultControlVpi | read-only | current | The default VPI value for the non-MPLS connection. The default value of this is 0 (zero) but other values may be configured. This object allows a different val… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.7 | ColumnmplsLdpEntityAtmDefaultControlVci | read-only | current | The Default VCI value for a non-MPLS connection. The default value of this is 32 but other values may be configured. This object allows a different value to be… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.8 | ColumnmplsLdpEntityAtmUnlabTrafVpi | read-only | current | VPI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the defau… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.9 | ColumnmplsLdpEntityAtmUnlabTrafVci | read-only | current | VCI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the defau… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.1.1.10 | ColumnmplsLdpEntityAtmStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2 | TablemplsLdpEntityAtmLRTable | not-accessible | current | The MPLS LDP Entity ATM Label Range (LR) Table. The purpose of this table is to provide a mechanism for configuring a contiguous range of vpi's with a contiguo… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2.1 | RowmplsLdpEntityAtmLREntry | not-accessible | current | A row in the LDP Entity ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and… |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2.1.1 | ColumnmplsLdpEntityAtmLRMinVpi | not-accessible | current | The minimum VPI number configured for this range. The value of zero is a valid value for the VPI portion of the label. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2.1.2 | ColumnmplsLdpEntityAtmLRMinVci | not-accessible | current | The minimum VCI number configured for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2.1.3 | ColumnmplsLdpEntityAtmLRMaxVpi | read-only | current | The maximum VPI number configured for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2.1.4 | ColumnmplsLdpEntityAtmLRMaxVci | read-only | current | The maximum VCI number configured for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.4.1.2.1.5 | ColumnmplsLdpEntityAtmLRStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.4.2 | NodemplsLdpAtmSessionObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.4.2.1 | TablemplsLdpAtmSessionTable | not-accessible | current | A table which relates sessions in the 'mplsLdpSessionTable' and their label range intersections. There could be one or more label range intersections between a… |
| 1.3.6.1.4.1.738.1.6.5.1.4.2.1.1 | RowmplsLdpAtmSessionEntry | not-accessible | current | An entry in this table represents information on a single label range intersection between an LDP Entity and LDP Peer. The information contained in a row is re… |
| 1.3.6.1.4.1.738.1.6.5.1.4.2.1.1.1 | ColumnmplsLdpSessionAtmLRLowerBoundVpi | not-accessible | current | The minimum VPI number for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.4.2.1.1.2 | ColumnmplsLdpSessionAtmLRLowerBoundVci | not-accessible | current | The minimum VCI number for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.4.2.1.1.3 | ColumnmplsLdpSessionAtmLRUpperBoundVpi | read-only | current | The maximum VPI number for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.4.2.1.1.4 | ColumnmplsLdpSessionAtmLRUpperBoundVci | read-only | current | The maximum VCI number for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.5 | NodemplsLdpAtmConformance | |||
| 1.3.6.1.4.1.738.1.6.5.1.5.1 | NodemplsLdpAtmGroups | |||
| 1.3.6.1.4.1.738.1.6.5.1.5.1.1 | GroupmplsLdpAtmGroup | current | Objects that apply to all MPLS LDP implementations using ATM as the Layer 2. | |
| 1.3.6.1.4.1.738.1.6.5.1.5.2 | NodemplsLdpAtmCompliances | |||
| 1.3.6.1.4.1.738.1.6.5.1.5.2.1 | CompliancemplsLdpAtmModuleFullCompliance | current | The Module is implemented with support for read-create and read-write. In other words, both monitoring and configuration are available when using this MODULE-C… | |
| 1.3.6.1.4.1.738.1.6.5.1.5.2.2 | CompliancemplsLdpAtmModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
| 1.3.6.1.4.1.738.1.6.5.1.6 | NodemplsLdpFrameRelayObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.6.1 | NodemplsLdpEntityFrameRelayObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1 | TablemplsLdpEntityFrameRelayTable | not-accessible | current | This table contains Frame Relay specific information which could be used in the 'Optional Parameters' and other Frame Relay specific information. |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1.1 | RowmplsLdpEntityFrameRelayEntry | not-accessible | current | An entry in this table represents the Frame Relay optional parameters associated with the LDP entity. |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1.1.1 | ColumnmplsLdpEntityFrameRelayIfIndexOrZero | read-only | current | This value represents either the InterfaceIndex of the 'ifLayer' where the Frame Relay Labels 'owned' by this entry were created, or 0 (zero). The value of zer… |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1.1.2 | ColumnmplsLdpEntityFrameRelayMergeCap | read-only | current | This represents whether or not the Frame Relay merge capability is supported. This is the EXACT value for the Frame Relay Session Parameter, field M (for Frame… |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1.1.3 | ColumnmplsLdpEntityFrameRelayLRComponents | read-only | current | Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityFrameRelayLRTable which correspo… |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1.1.4 | ColumnmplsLdpEntityFrameRelayVcDirectionality | read-only | current | If the value of this object is 'bidirectional(0)', then the LSR supports the use of a given DLCI as a label for both directions independently. If the value of … |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.1.1.5 | ColumnmplsLdpEntityFrameRelayStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.2 | TablemplsLdpEntityFrameRelayLRTable | not-accessible | current | This table contains information about the Optional Parameters for the Frame Relay Session in the LDP Initialization Message, specifically it contains informati… |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.2.1 | RowmplsLdpEntityFrameRelayLREntry | not-accessible | current | An entry in this table represents the Frame Relay Label Range Component associated with the LDP entity. |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.2.1.1 | ColumnmplsLdpEntityFrameRelayLRMinDlci | not-accessible | current | The lower bound which is supported. This value should be the same as that in the Frame Relay Label Range Component's Minimum DLCI field. The value of zero is v… |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.2.1.2 | ColumnmplsLdpEntityFrameRelayLRMaxDlci | read-only | current | The upper bound which is supported. This value should be the same as that in the Frame Relay Label Range Component's Maximum DLCI field. |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.2.1.3 | ColumnmplsLdpEntityFrameRelayLRLen | read-only | current | This object specifies the length of the DLCI bits. This is the EXACT value for the Len field of the Frame Relay Label Range Component. The description from rfc… |
| 1.3.6.1.4.1.738.1.6.5.1.6.1.2.1.4 | ColumnmplsLdpEntityFrameRelayLRStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.6.2 | NodemplsLdpFrameRelaySessionObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.6.2.1 | TablemplsLdpFrameRelaySessionTable | not-accessible | current | A table of Frame Relay label range intersections between the LDP Entities and LDP Peers. Each row represents a single label range intersection. NOTE: this tabl… |
| 1.3.6.1.4.1.738.1.6.5.1.6.2.1.1 | RowmplsLdpFrameRelaySessionEntry | not-accessible | current | An entry in this table represents information on a single label range intersection between an LDP Entity and LDP Peer. The information contained in a row is re… |
| 1.3.6.1.4.1.738.1.6.5.1.6.2.1.1.1 | ColumnmplsLdpFrameRelaySessionMinDlci | not-accessible | current | The lower bound of DLCIs which are supported. The value of zero is a valid value for the minimum DLCI field of the label. |
| 1.3.6.1.4.1.738.1.6.5.1.6.2.1.1.2 | ColumnmplsLdpFrameRelaySessionMaxDlci | read-only | current | The upper bound of DLCIs which are supported. |
| 1.3.6.1.4.1.738.1.6.5.1.6.2.1.1.3 | ColumnmplsLdpFrameRelaySessionLen | read-only | current | This object specifies the DLCI bits. |
| 1.3.6.1.4.1.738.1.6.5.1.7 | NodemplsLdpFrameRelayConformance | |||
| 1.3.6.1.4.1.738.1.6.5.1.7.1 | NodemplsLdpFrameRelayGroups | |||
| 1.3.6.1.4.1.738.1.6.5.1.7.1.1 | GroupmplsLdpFrameRelayGroup | current | Objects that apply to all MPLS LDP implementations using Frame Relay as the Layer 2. | |
| 1.3.6.1.4.1.738.1.6.5.1.7.2 | NodemplsLdpFrameRelayCompliances | |||
| 1.3.6.1.4.1.738.1.6.5.1.7.2.2 | CompliancemplsLdpFrameRelayModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
| 1.3.6.1.4.1.738.1.6.5.1.8 | NodemplsLdpGenericObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.8.1 | NodemplsLdpEntityGenericObjects | |||
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1 | TablemplsLdpEntityGenericLRTable | not-accessible | current | The MPLS LDP Entity Generic Label Range (LR) Table. The purpose of this table is to provide a mechanism for configurating a contiguous range of generic labels,… |
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1.1 | RowmplsLdpEntityGenericLREntry | not-accessible | current | A row in the LDP Entity Generic Label Range (LR) Table. One entry in this table contains information on a single range of labels represented by the configured … |
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1.1.1 | ColumnmplsLdpEntityGenericLRMin | not-accessible | current | The minimum label configured for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1.1.2 | ColumnmplsLdpEntityGenericLRMax | not-accessible | current | The maximum label configured for this range. |
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1.1.3 | ColumnmplsLdpEntityGenericLabelSpace | read-only | current | This value of this object is perPlatform(1), then this means that the label space type is per platform. If this object is perInterface(2), then this means that… |
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1.1.4 | ColumnmplsLdpEntityGenericIfIndexOrZero | read-only | current | This value represents either the InterfaceIndex of the 'ifLayer' where these Generic Label would be created, or 0 (zero). The value of zero means that the Inte… |
| 1.3.6.1.4.1.738.1.6.5.1.8.1.1.1.5 | ColumnmplsLdpEntityGenericLRStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.738.1.6.5.1.9 | NodemplsLdpGenericConformance | |||
| 1.3.6.1.4.1.738.1.6.5.1.9.1 | NodemplsLdpGenericGroups | |||
| 1.3.6.1.4.1.738.1.6.5.1.9.1.1 | GroupmplsLdpGenericGroup | current | Objects that apply to all MPLS LDP implementations using Generic Labels as the Layer 2. | |
| 1.3.6.1.4.1.738.1.6.5.1.9.2 | NodemplsLdpGenericCompliances | |||
| 1.3.6.1.4.1.738.1.6.5.1.9.2.2 | CompliancemplsLdpGenericModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsLabel | Integer32(0..2147483647) | current | This value represents an MPLS label. The label contents are specific to the label being represented. The label carried in an MPLS shim header (for LDP, the Generic Label) is a 20-bit number represented by 4 octets. Bits… |
| MplsLdpLabelTypes | INTEGER { generic(1), atm(2), frameRelay(3) } | current | The Layer 2 label types which are defined for MPLS LDP are generic(1), atm(2), or frameRelay(3). |